Meat And Livestock Commission Research Articles

Evaluating the effects of the c.*1232G > A mutation and TM-QTL in Texel × Welsh Mountain lambs using ultrasound and video image analyses

The c.*1232G > A (MM) mutation in the myostatin gene and TM-QTL are two muscle-enhancing polymorphisms found on Chr 2 and Chr 18, respectively, in Texel sheep. Previous studies on purebred lambs and crossbred lambs out of Mule ewes showed that MM was associated with increased muscle mass and decreased fat content whereas heterozygous TM-QTL lambs had increased loin muscle (M. longissimus lumborum, MLL) depth as measured by ultrasound and increased MLL weight. Welsh Mountain ewes, like Mule ewes, contribute significantly to UK slaughter lamb production from the UK sheep industry's stratified structure. Therefore, this study aimed to evaluate the direct effects of MM and TM-QTL in the genetic background of Texel×Welsh Mountain lambs.Four Texel sires, all MM carriers and two TM-QTL carriers, were used to inseminate Welsh Mountain ewes. Of the 175 lambs born, 130 could be classified for TM-QTL genotype [107 non-carriers (+/+), 23 heterozygous carriers (TM/+)] and 172 for MM genotype [15 non-carriers (+/+), 129 heterozygous carriers (MM/+), 28 homozygous carriers (MM/MM)]. All lambs were weighed at 8 and ∼23weeks of age and were ultrasound scanned before being slaughtered at ∼24weeks of age. All carcasses were graded for conformation and fat class, based on Meat and Livestock Commission (MLC) classification scores, and then scanned using a video image analysis (VIA) system to predict weight of carcass primal cuts and trimmed primal cuts, muscularity traits and carcass shape traits.Carrying two copies of MM was associated with a significant positive effect on 8 weeks weight, a negative effect on ultrasound fat depth and a substantial decrease in MLC-fat score. Two copies of MM also had a strong positive impact on VIA-estimated weight of the hind leg, chump and loin primal cuts, as well as the muscularity of the hind leg and loin regions with greater loin muscle width, depth and area. Homozygous MM carrier lambs had significantly wider carcasses across the shoulders, breast and hind legs and greater areas of the back view of the carcass when measured by VIA. Leg and carcass compactness were also significantly associated with the presence of two copies of MM. However, lambs carrying a single copy of MM were not significantly different to non-carriers in any of the traits measured. TM-QTL significantly increased ultrasound muscle depth and TM-QTL carriers had significantly greater loin muscle width and area measurements. Carcass weight did not differ significantly between genotypic classes for MM or TM-QTL. These results agree in general with other reports of the effects of MM and TM-QTL, in both direction and magnitude, on carcass traits.

The effects of a loin muscling quantitative trait locus (LoinMAX™) on carcass and VIA-based traits in crossbred lambs

LoinMAX (LM) is a quantitative trait locus (QTL), which was found to be segregated in Australian Poll Dorset sheep, and maps to the distal end of sheep chromosome 18. LM-QTL was reported to increase Musculus longissimus dorsi area and weight by 11% and 8%, respectively. The aim of this study was to comprehensively evaluate the direct effects of LM-QTL in a genetic background typical of the stratified structure of the UK sheep industry, before it can be recommended for use in the United Kingdom. Crossbred lambs, either non-carriers or carrying a single copy of LM-QTL, were produced out of Scottish Mule ewes (Bluefaced Leicester × Scottish Blackface) artificially inseminated with semen from two Poll Dorset rams that were heterozygous for LM-QTL. Unexpectedly, one of these rams was also heterozygous for a QTL that affects the overall carcass muscling (MyoMAX™). This was accounted for by nesting MyoMAX™ status (carrier or non-carrier) within sire in the statistical analysis. Lambs were weighed and scanned by using X-ray computed tomography (CT) at an average age of 113 days. Ultrasound scan measurements, along with lamb weights, were taken at an average age of 140 days and lambs were then slaughtered. Carcasses were weighed and classified for fat cover and conformation scores, based on the Meat and Livestock Commission (MLC) carcass classification scheme, and then scanned by using a video image analysis (VIA) system. M. longissimus lumborum (MLL) width, as measured by CT scanning, was greater (P < 0.05) in lambs heterozygous for LM-QTL compared with non-carriers. MLL in LM-QTL carrier lambs was also significantly deeper, as measured by both ultrasound muscle depth at the third lumbar vertebrae (+3.7%; P < 0.05) and CT scanning at the fifth lumbar vertebrae (+3.4%; P < 0.01). Consequently, MLL area, was measured by using CT scanning, was significantly higher (+4.5%; P < 0.01) in lambs carrying a single copy of LM-QTL compared with non-carriers. Additional traits measured by CT, such as leg muscle dimensions, average muscle density and tissue proportions, were not significantly affected by LM-QTL. LM-QTL did not significantly affect total carcass lean or fat weights or MLC conformation and fat score classifications. Using previously derived algorithms, VIA could detect a significant effect of the LM-QTL on the predicted weight of saleable meat yield in the loin primal cut (+2.2%; P < 0.05), but not in the other primal cuts, or the total carcass.

The effects of selection indices for sustainable hill sheep production on carcass composition and muscularity of lambs, measured using X-ray computed tomography

A multi-trait selection index designed to improve the overall economic performance of hill sheep, including both maternal and lamb traits, has been developed and tested in a selection experiment over 7 years. Two versions of the index were tested, with different economic weights applied to the traits, on two different hill farms: one version including maternal and growth traits; the other version with additional breeding goals of carcass weight, fatness and conformation scores. Responses to selection, using both versions of the index, suggest that improvements are being made in overall index score and lamb growth. This study investigated the indirect effects of these selection indices on lamb carcass composition and muscularity traits, as measured using X-ray computed tomography (CT) scanning. A total of 499 lambs from the two hill farms were CT scanned at weaning (approximately 120 days of age). Approximately half of the lambs from each farm were from the selection line (S, animals with highest index scores selected for breeding), while the other half were from a control line (C, animals with average index scores selected). Composition and muscularity traits were estimated on each lamb from CT data and differences between genetic lines investigated, within farm, using restricted maximum likelihood analyses, adjusting for either live weight or age. Results showed that the selection index without carcass traits produced lambs with carcass composition that was not significantly different to control lambs at a given live weight or age. Including carcass traits in the index resulted in lambs with no compositional differences (except for a slight increase in bone) at a set age compared with controls. At a given live weight however, selection lambs had less fat and lower carcass weights and killing-out percentage. Muscularity (3-D muscle shape) and muscle area shape (2-D) were not improved as a result of selection on either version of the index (including carcass weight and grades in the breeding goals or not) and, at a fixed live weight, muscularity in hind leg and lumbar regions tended to be higher in the C line. To accelerate changes in carcass composition and muscularity within the context of a multi-trait selection index for hill sheep, consideration should therefore be given to including objective CT-derived carcass traits in the index in addition to the Meat and Livestock Commission (MLC) carcass grades or ultrasound measurements.

A genetic analysis of wool characteristics and lamb performance traits in Scottish Blackface sheep

AbstractGenetic parameters were estimated for wool quality, fleece characteristics and lamb production traits for Scottish Blackface sheep reared under extensive hill conditions in the UK. In two separate studies, heritabilities and genetic correlations were estimated for wool quality traits measured on lambs at 5 months of age and again on the shorn fleece a year later. The wool traits included birth coat length (BCT), 10-point scores for proportion of grey and kemp fibres present in the fleece (grey, kemp), British Wool Marketing Board (BWMB) recommendation (REC), greasy fleece weight (FLWT), BWMB fleece grade (FLGR), and average staple length (ASL). Genetic and phenotypic correlations were estimated between lamb wool traits and lamb live weights at birth (BWT), marking (at mid lactation with an average age of 7 weeks) (MWT), weaning (at an average age of 17 weeks) (WWT) and slaughter (SLWT), average fat depth (AVFD) and average muscle depth (MD). Individual lamb carcass measurements included Meat and Livestock Commission (MLC) conformation score (CONF) and fat class (FATC). Heritability estimates measured on 2524 or more live lambs were 0·69, 0·52, 0·26, 0·42 and 0·31 for BCT, ASL, grey, kemp and REC respectively. Heritability estimates for traits measured on the shorn fleece a year later for 1415 ewes were 0·37, 0·02, 0·57, 0·43, 0·46 and 0·14 for ASL, grey, kemp, REC, FLWT and FLGR respectively. Genetic correlations between FLWT in hoggets and other wool were positive and moderate to high in magnitude, ranging from 0·22 for kemp in lambs to 0·48 for grey in hoggets. Genetic correlations between REC and live-weight traits were 0·39 for MWT, 0·37 for WWT and 0·44 for SLWT. Genetic correlation between ASL and ultrasonic fat depth was 0·15 and for ASL and ultrasonic muscle depth was -0·30. The results indicate that the simple scoring systems derived to assess these traits are useful indicators of fleece quality, are highly repeatable over time and are a good gauge of likely future wool production. The results indicate that selection for heavier, leaner lambs should not compromise fleece quality, as assessed in this study.

Food safety through the meat supply chain.

Food poisoning in humans can be caused by many different bacterial genera. While the incidence of food poisoning in England, Wales and Scotland from Salmonella has reached a plateau, there has been an increase in the incidence from Campylobacter. The incidence from Escherichia coli O157:H7 rose to 1997 but declined slightly in 1998 (data from the Public Health Laboratory Service and the Scottish Centre for Infection and Environmental Health). This organism has a high virulence in humans and a very low infective dose. Infection can produce a wide range of responses, including death. The low infective dose presents a major threat. The organism is relatively heat-sensitive and the cooking of food products to achieve a centre core temperature of 70 degrees C for 2 min is sufficient to destroy it. It is relatively acid-tolerant and will survive for several weeks at pH 4.2. Several foodstuffs, as well as water, have been implicated in world-wide outbreaks. The E. coli O157:H7 food-borne outbreak in Lanarkshire in 1996 led to 21 fatalities. The Pennington Group report, issued in April 1997, reported on the circumstances leading to this outbreak, the implications for food safety and the lessons to be learnt. Four areas covered within the Pennington Group report specific to meat hygiene are reviewed in this paper. On-farm practices must ensure the presentation of clean animals for slaughter. There is a requirement for the development and introduction of risk assessment techniques based upon Hazard Analysis of Critical Control Points in abattoirs, and the Meat and Livestock Commission (MLC) is producing a manual for use by the abattoir sector. The Pennington report stated that there was a need for research into the potential use of end-process treatments such as steam pasteurization. The MLC is involved in evaluating such a system. Meat production premises and butchers' shops in England are introducing HACCP through an MLC scheme funded by the Department of Health. At the point of consumption, food safety is improved by the provision of practical guidelines regarding the handling of meat and meat products. These are distributed at retail outlets and communicated to secondary schools via MLC's educational publications.

A comparison of growth and carcass traits in Scottish Blackface lambs sired by genetically lean or fat rams

AbstractAn experimental programme was initiated in 1990 to investigate the consequences of selection for reduced fatness in hill sheep and to estimate genetic parameters for carcass traits in the same class of animal. Thirty-two progeny groups of lambs were born as a result of mating Scottish Blackface rams to ewes of the same breed on two Scottish Agricultural College hill farms in 1991 and 1992. Sires were from two divergent selection lines for subcutaneous back fat depth and were selected under ad libitum feeding conditions on an index combining live weight and ultrasonic fat depth at 20 weeks of age. The index was designed to alter body composition but not body weight. Weaned male progeny (reared extensively) were brought together from both farms in August of each year, reared on grass and finished for slaughter on swedes at a target condition score of 3. Measurements taken at weaning were: live weight, average ultrasonic measurements of average subcutaneous fat depth and muscle depth. At slaughter, traits measured were: pre-slaughter live weight, pre-slaughter condition score, age at slaughter, cold carcass weight, killing-out proportion, Meat and Livestock Commission (MLC) fat class and MLC conformation class. Side and shoulder dissections were made on proportionally 0·2 and 0·8 of lambs respectively and lean tissue, subcutaneous fat, intermuscular fat and bone were measured. Comparisons were made between the two genetic lines and genetic parameters were estimated from data adjusted to three different ‘end-points’: constant dissected subcutaneous fat weight, constant age at slaughter and constant cold carcass weight. Moderate to low heritability estimates were obtained for most traits: pre-slaughter live weight = 0·36, cold carcass weight = 0·39, fat class = 0·13, conformation class = 0·09, lean weight = 0·27, bone weight = 0·36 (constant subcutaneous fatness), intermuscular fat = 0·20, subcutaneous fat = 0·20 (constant cold carcass weight). Correlations between ultrasonic measurements at weaning, and slaughter and dissected carcass components were moderate to weak. However, there is sufficient genetic variation in the carcass traits to warrant inclusion in breeding goals for hill sheep. The results also show that genetic differences obtained by selection under intensive rearing conditions for divergent fatness are also seen in progeny reared under extensive (hill) conditions.

Results of multivariate individual animal model genetic evaluations of british pedigree beef cattle

AbstractThis paper reports the procedures put into place in the UK for the genetic evaluation of pedigree beef cattle and estimation of genetic trends using a comprehensive model to allow critical analysis of progress made under previous data recording schemes. Live weights of Simmental, Limousin, Charolais, South Devon and Aberdeen Angus beef cattle, recorded by the Meat and Livestock Commission (MLC) from 1970 to 1992 were analysed, as part of a project to introduce best linear unbiased predictions (BLUP) of breeding value in the British beef industry. Birth weights were available from MLC or the relevant breed society, (4000 to 84000 records, depending on the breed) and 200- and 400-day weights were estimated by within-animal linear regression on all available weights (resulting in 8000 to 48000 records per breed). Animals were retrospectively assigned to contemporary groups within herds, separately for each trait, taking account of observed calving patterns. Records were adjusted to correct for heterogeneity of variance between herds. BLUP evaluations were then performed within breed, fitting a multivariate individual animal model. In addition to additive direct genetic effects, additive maternal genetic and dam permanent environmental effects were included for birth weight and 200-day weight. Unknown parents were assigned to genetic groups, based on estimated date of birth. The model included fixed effects for contemporary group, sex, month of birth, birth type (single or multiple), embryo transfer births, fostered calves, breed of dam, proportion purebred and age of dam. Genetic trends were estimated by regressing estimated breeding values for animals on their year of birth. Trends in birth weight, 200-day weight and 400-day weight between 1970 and 1992 were approximately 0·09, 0·73 and 1·38 kg per annum respectively for the Charolais breed; 0·08, 0·76 and 1·33 kg per annum for the Simmental; 0·06, 0·53 and 0·89 kg per annum for the Limousin; 0·12, 1·02 and 1·86 kg per annum for the Aberdeen Angus; and 0·03, 0·38 and 0·82 kg per annum for the South Devon breed.

The effects of selection for lean growth in Suffolk sires on the saleable meat yield of their crossbred progeny

AbstractThis experiment involved a commercial evaluation of carcasses of extensively reared crossbred lambs. These were sired by Suffolk rams from either a selection line or a control line of a Scottish Agricultural College (SAC) selection experiment, in which selection wasfor lean growth, or by Suffolk ‘reference sires’ from an industry co-operative breeding scheme (SSRS). The lambs were slaughtered at a target live weight of 42 kg between June and October 1992. In total, 421 lamb carcasses were included in the evaluation, 173 from six selection-line rams, 193 from six control-line rams and 55from three SSRS rams. Each of the carcasses was visually appraised for estimated subcutaneous fat proportion and for conformation of the shoulder, loin and leg, as well as being classified using conventional Meat and Livestock Commission (MLC) scales for fat and conformation. Animals were slaughtered at an average age of 139·5 (s.d. 25·6) days and achieved an average cold carcass weight of 20·04 (s.d. 0·96) kg. Carcasses had an average estimated subcutaneous fat proportion of 122·3 (s.d. 22·4) g/kg — equivalent to MLC fat class 3L to 3H. Overall conformation scores, on a 15-point scale, averaged 8·63 (s.d. 1·80) points. Carcasses were cut into joints according to a leading supermarket specification. The weights of pairs of shoulder, flank, loin and leg joints were obtained for each carcass, as well as weights of bone and fat removed during jointing. Saleable meat weights and proportions averaged 15·31 (s.d. 0·76) kg and 765·9 (s.d. 10·0) g/kg respectively. At a constant carcass weight, the SAC selection-line progeny were significantly younger (-11 days), had a significantly higher carcass value (+£1·50), a significantly lower estimated subcutaneous fat proportion (-13 g/kg), and a significantly higher weight of saleable meat (+0·1 kg) and higher proportion ofsaleable meat (+4 glkg) than control-line progeny, but had lower conformation scores. SSRS progeny had similar growth and fatness to selection-line lambs, but had poorer conformation, and significantly more bone in the carcass than either of the SAC lines. When comparisons were made at a constant estimated subcutaneous fat proportion, all differences in conformation between SAC lines disappeared. However, SSRS progeny remained poorer in conformation. The SSRS rams werefrom afoundation generation of the scheme, and were not expected to be markedly superior for carcass characteristics. Carcass weight was byfar the most important predictor of weight of saleable meat, or leg and loin joint weights. Conformation and estimated fat proportion made only marginal improvements, if any, to the precision of prediction, with fat proportion being the more important of the two predictors.

Comparison of Four Ultrasonic Techniques for In Vivo Estimation of Sheep Carcass Composition

1. There are many ultrasonic machines using a range of techniques varying in sophistication to measure fat and muscle depths for predicting carcass composition. An evaluation of four techniques was conducted by the Meat and Livestock Commission (MLC) to enable potential users to select the most appropriate technique based on accuracy, practicality and cost.2. A total of 150 commercial sheep comprising approximately equal numbers of castrates and ewes were evaluated in five batches of about equal size in lairage at one of two abattoirs. Live weight was recorded together with fat and muscle measurements from the Aloka, Dynamic Imaging, Dumatic and Velocity of Sound (VOS) ultrasonic techniques.3. The Aloka is a B-Mode real-time medical scanner which is currently used on cattle in Australia. The Dynamic Imaging is also a B-Mode real-time medical scanner which is currently used in MLC's Sheepbreeder Service.

Improving meat quality: the blueprint approach

AbstractConsumer demand for meat is strongly influenced by sensory aspects of meat quality, particularly visual appeal and eating quality. One of the most important of these traits is tenderness which is notoriously complex in origin and hence difficult to control. Potential interactions between diet, pre-slaughter handling, chill rate, muscle shortening during chilling and, therefore, toughness are presented to illustrate the complexity of controlling the trait. The final eating quality result is far from predictable. The Meat and Livestock Commission (MLC) has identified the enhancement of eating quality of beef and pork as important objectives for industry. It has produced and tested blueprint specifications which aim to summarize the ‘best state of the art’ regarding eating quality at each stage of the production and processing chain. The strengths and weaknesses of this approach are discussed. The standard blueprint specification for pork produced an improvement in tenderness of 0.6 scale points (P&lt;0.001, scale = 1 to 8) over random retail purchases of pork chops and a significant reduction in variance. However, considerable residual variation remains, providing the opportunity for greater improvements to be made in the future.

Changes in quality specifications for different markets

AbstractThere are three major markets for lamb — retail and catering domestic markets, and the export market. Most of the latter is within the European Community (EC) and as 1992 approaches the differences between the domestic and EC export markets will become less distinct. The basis of specifications for all of these markets, and sectors within them, is weight range, fatness and conformation. The majority of lamb is sold to the consumer (whether retail or catering) in a ‘bone-in’ form and weight range is therefore critical for many cuts, for example chops and leg joints, in determining either weight at sale (and price of pack) or portion size.In the domestic market major multiple supermarkets are gaining market share at the expense of independent butchers. With their purchasing power they can and do impose increasingly tight and sophisticated specifications. All, for their majority of ‘bone-in’ cuts, specify a carcass weight range of 16 to 20 kg. It is estimated by the Meat and Livestock Commission (MLC) that around 8% of lamb is now sold retail in a boneless form (boneless joints, lamb steaks, cubed lamb and minced lamb) and that this is a growing sector of the lamb market. Lamb is a small carcass unit (in comparison with beef and pork), has a high bone content and thus the cost of boning-out lamb carcasses is high. To reduce costs there is advantage in buying heavier lambs (but only if they are lean) and the premium specification for lambs for producing boneless cuts (and other forms of products) are increasingly in the range 20 to 24 kg.Fatness continues to be the primary consumer negative about lamb. For ‘bone-in’ cuts it is difficult to trim, for boneless cuts extra trimming is possible but at the cost of reduced yields. There is a common specification for fatness in terms of MLC carcass classification — fat class 2 or 3L with increasing preference for the former. Conformation is the least important aspect of domestic market specifications. Nevertheless, for ‘bone-in’ cuts, particularly the important leg joint, shape is considered by many meat buyers as being important and most will be specifying carcasses of at least average shape, i.e. carcass class R. The export market is more complicated in terms of basic specifications. For the major market in northern and central France the specification is more or less identical to that of the major supermarkets in the domestic market. In south Europe requirement is for a much lighter lamb, 8 to 12 kg, very lean, fat class 1 and 2, and shape is almost irrelevant. Belgium and Germany require heavier lambs (18 to 22 kg) and this reflects usage in catering and processing.There is growing interest in quality assurance schemes for lamb in the UK based on various carcass, slaughterhouse, storage and distribution factors.

National estimates of the body composition of British cattle, sheep and pigs with special reference to trends in fatness

1The relationship between diet and health is now a major factor in the development of production and marketing strategies for the British meat industry, following Government recommendations that people should be encouraged to eat less fat. It has emphasised the need for accurate information on the body composition of national livestock populations and the fat content of the meat and meat products derived from them. This paper collates the information available for cattle, sheep and pigs, and provides base-line (1984) estimates of national lean and fat production. Changes that have taken place over the past ten years are also examined.2The basic framework for making estimates was the distribution of carcasses between fatness ranges in the national carcass classification schemes operated by the Meat and Livestock Commission (MLC). The distribution for cattle was obtained from a random 1 in 3 sample of beef carcasses classified (0.25 of all clean beef carcasses were classified).3A computer spread-sheet was constructed relating the midpoint means of the fatness ranges to carcass tissue proportions and chemical composition. Regressions for predicting carcass lean and fat content were calculated from accumulated data from surveys of commercial carcasses and breed evaluations for cattle (Kempster, 1986), for sheep (Kempster, Jones and Wolf, 1986a) and for pigs (Diestre and Kempster, 1985). Key regressions are given in Table 1. Carcass lean and fat are defined as in the standard MLC tissue separation procedure. Regressions for estimating carcass lipid content: were obtained using data from several studies. The principal study involved carcasses from breed comparison trials (MAFF/MLC, 1982). Details of the other data sets are given by Kempster, Cook and Grantley-Smith (1986b). Key relationships are given in Table 2.4Estimates of the composition of carcasses in different classification fatness ranges are given in Table 3. These are for 'clean' cattle, sheep and pigs, but estimates were also made for cull cows and cull ewes.5National estimates of carcass composition and the weights of lean and fat produced in 1975/77 and 1984 are given in Table 4. The carcass composition of beef was the same in 1974/76 and 1984 but the average carcass weight has increased by 20kg. The implication of this is that changes in breed and production system have created the potential for leaner carcasses but that the beef industry has preferred to exploit this potential by increasing carcass weights. An increase of 20kg is equivalent to about 15gAg separable fat in carcass on the basis of typical regressions within breed and system.The carcasses of clean sheep in 1984 were estimated to be slightly lighter and leaner than those in 1977. Information on marketing patterns suggests that there has been little change in production methods (as far as they affect composition) and that lambs are now being slaughtered early, possibly stimulated by the pattern of Guide Prices in the EEC Sheep Meat Regime.In marked contrast to cattle and sheep, the separable fat content of the average pig carcass has fallen from 274g/kg in 1975 to 228g/kg in 1985, with a small increase in carcass weight. It is estimated that the increase in the use of entire males has contributed 5g/kg to the overall change.6The estimates in the paper are considered to be the best available with current information but because of the limitations of the data may be subject to error. Possible sources of error are discussed by Kempster et al (1986b). The authors would be pleased to know of data relating physical and chemical composition that could be used to refine the estimates.

How well do bacon grade schedules reflect carcass composition?

Most bacon carcasses in Britain are measured, within the national Pig Carcase Classification Scheme operated by the Meat and Livestock Commission (MLC), for P2 fat thickness, shoulder and loin fat thicknesses and carcass length. Bacon curers use these measurements to define the grading schedules most appropriate to their buying requirements.There is debate about the value of mid-line fat measurements and length as indicators of carcass quality. The scientific evidence indicates that mid-line measurements are less precise predictors of carcass lean content than P2, and that the mid-line loin measurement is superior to the mid-line shoulder measurement.However, it is argued that the mid-line measurements may have special regional value: eg as predictors of carcass lean content in individual joints. The analysis reported uses a computer model (PIGRADER) to examine overall lean in carcass, the composition of individual joints and joint proportions for alternative grading schedules.

A note on the comparison of two dissection methods used routinely in britain for beef carcass evaluation

ABSTRACTThe dissection methods used at the ARC Meat Research Institute, Langford (MRI) and by the Meat and Livestock Commission (MLC) for beef carcass evaluation were compared.When account was taken of small differences in the way tissues are defined in the two methods, they gave essentially the same results for the important aspects of carcass composition. Twenty carcasses with 60 to 120 g subcutaneous fat per kg side weight were selected from those in the serial slaughter phase of the MLC's beef breed evaluation programme. The cattle had been slaughtered and dressed at a commercial abattoir on the same site as the MLC's Central Carcass Evaluation Unit, Blisworth. The left sides were dissected by the MLC and the right sides at the MRI after being taken there as quarters (which resulted in a greater evaporative weight loss). Mean values for lean, bone, intermuscular fat and subcutaneous fat (as g/kg in the side) did not differ significantly between the methods and the slopes of the regressions of MRI on MLC proportionate composition values were not significantly different from 1·0.

The relationship between conformation and the yield and distribution of lean meat in the carcasses of British pigs, cattle and sheep: A review

Information available on the value of conformation as a predictor of carcass composition in the British livestock population is reviewed, particular reference being made to recent Meat and Livestock Commission (MLC) trials using the visual conformation assessments employed in national carcass classification schemes. In mixed breed populations, the visual conformation assessments are positively related to lean to bone ratio and muscle thickness, although the correlations are generally low. Their relationship with carcass lean content depends on the effectiveness with which variation in fatness is eliminated since fatter carcasses tend to be given higher conformation scores. Conformation provides little information about the proportion of total lean occurring in the higher priced joints. The value of conformation in a mixed breed population depends to an important extent on its ability to identify breed differences in carcass characteristics. Although of some value in this respect, it is less effective than actual breed identification. Within-breed regressions on conformation are generally in the same direction as those in the mixed breed populations, although the precision of prediction is lower. The results indicate that conformation has little practical value as a predictor of carcass composition within breed.