Measurement-induced Dephasing Research Articles

Readout-Induced Suppression and Enhancement of Superconducting Qubit Lifetimes.

It has long been known that the lifetimes of superconducting qubits suffer during readout, increasing readout errors. We show that this degradation is due to the anti-Zeno effect, as readout-induced dephasing broadens the qubit so that it overlaps "hot spots" of strong dissipation, likely due to two-level systems in the qubit's bath. Using a flux-tunable qubit to probe the qubit's frequency-dependent loss, we accurately predict the change in lifetime during readout with a new self-consistent master equation that incorporates the modification to qubit relaxation due to measurement-induced dephasing. Moreover, we controllably demonstrate both the Zeno and anti-Zeno effects, which can explain both suppression and the rarer enhancement of qubit lifetimes during readout.

Cloaking a qubit in a cavity

Cavity quantum electrodynamics (QED) uses a cavity to engineer the mode structure of the vacuum electromagnetic field such as to enhance the interaction between light and matter. Exploiting these ideas in solid-state systems has lead to circuit QED which has emerged as a valuable tool to explore the rich physics of quantum optics and as a platform for quantum computation. Here we introduce a simple approach to further engineer the light-matter interaction in a driven cavity by controllably decoupling a qubit from the cavity’s photon population, effectively cloaking the qubit from the cavity. This is realized by driving the qubit with an external tone tailored to destructively interfere with the cavity field, leaving the qubit to interact with a cavity which appears to be in the vacuum state. Our experiment demonstrates how qubit cloaking can be exploited to cancel the ac-Stark shift and measurement-induced dephasing, and to accelerate qubit readout. In addition to qubit readout, applications of this method include qubit logical operations and the preparation of non-classical cavity states in circuit QED and other cavity-based setups.

Noise suppression of transport through double quantum dots by feedback control

A controllable low noise current lies at the heart of high-precision measurements in quantum transport and metrology. While the previous research dealt with the suppression of noise in transport through a tunneling junction or a single quantum dot (QD) device, the present work investigates noise inhibition of a double quantum dot (DQD) transport system based on closed-loop feedback control. The unique advantage of a DQD device is that bidirectional transport at low bias can be measured by a nearby quantum point contact. However, the continuous monitoring of the DQD states inevitably leads to a measurement-induced dephasing. To appropriately characterize its transport properties in the presence of feedback action, we here develop a numerical method dubbed auxiliary density matrix approach, motivated by the hierarchical expansion of the moment-generating function in the hierarchy equations of motion [J. Cerrillo et al., Phys. Rev. B 94, 214308 (2016)]. This generic method has no restriction on the system structure and parameters and is able to evaluate the feedback current cumulants to an arbitrary order. It is revealed that the feedback control of the tunnel coupling between the two dots is the most effective to suppress the noise under various tunnel coupling configurations. The influence of interdot Coulomb interaction, measurement-induced dephasing, and finite time delay on feedback is also analyzed in detail.

Observation of Wave-Packet Branching through an Engineered Conical Intersection

Analog quantum simulators, which efficiently represent model systems, have the potential to provide new insight toward naturally occurring phenomena beyond the capabilities of classical computers. Incorporating dissipation as a resource unlocks a wider range of out-of-equilibrium processes such as chemical reactions. Here, we operate a hybrid qubit-oscillator circuit quantum electrodynamics simulator and model nonadiabatic molecular dynamics through a conical intersection. We identify dephasing of the electronic qubit as the mechanism that drives wave-packet branching when the corresponding oscillator undergoes large amplitude motion. Furthermore, we directly observe enhanced branching when the wave-packet passes through the conical intersection. Thus, the forces that influence a chemical reaction can be viewed from the perspective of measurement backaction in quantum mechanics—there is an effective measurement-induced dephasing rate that depends on the position of the wave packet relative to the conical intersection. Our results set the groundwork for more complex simulations of chemical dynamics using quantum simulators, offering deeper insight into the role of dissipation in determining macroscopic quantities of interest such as the quantum yield of a chemical reaction.5 MoreReceived 16 May 2022Revised 1 November 2022Accepted 19 December 2022DOI:https://doi.org/10.1103/PhysRevX.13.011008Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.Published by the American Physical SocietyPhysics Subject Headings (PhySH)Research AreasQuantum information processing with continuous variablesQuantum simulationQuantum Information

Time-dependent Schrieffer-Wolff-Lindblad perturbation theory: Measurement-induced dephasing and second-order Stark shift in dispersive readout

We develop a time-dependent Schrieffer-Wolff-Lindblad perturbation theory to study effective interactions for driven open quantum systems. The starting point of our analysis is a given Lindblad equation, based on which we obtain an effective (averaged) map that describes the renormalization of both the Hamiltonian and collapse operators due to the drive. As a case study, we apply this method to the dispersive readout of a transmon qubit and derive an effective disperive map that describes measurement-induced dephasing and Stark shift for the transmon. The effective map we derive is completely positive and trace-preserving under adiabatic resonator response. To benchmark our method, we demonstrate good agreement with a numerical computation of the effective rates via the Lindbladian spectrum. Our results are also in agreement with, and extend upon, an earlier derivation of such effects by Gambetta et al. (Phys. Rev. A 74, 042318 (2006)) using the positive P-representation for the resonator field.

Quantum Versus Classical Switching Dynamics of Driven Dissipative Kerr Resonators

We report a first-principles study of the driven dissipative dynamics for Kerr oscillators in the mesoscopic regime. This regime is characterized by large Kerr nonlinearity, realized here using the nonlinear kinetic inductance of a large array of Josephson junctions. The experimentally measured nonlinear resonance lineshapes of the junction array modes show significant deviations from steady-state numerical predictions, and necessitate time-dependent numerical simulations indicative of strong measurement-induced dephasing in the system arising from the large cross-Kerr effect between array modes. Analytical and numerical calculations of switching rate corroborate this by showing the emergence of a slow time scale, which is much longer than the linear decay rate and is set by fluctuation-induced switching times in the bistable regime. Furthermore, our analysis shows that the usual quantum-activated escape treatment is inadequate for prediction of the switching rates at large frequency shifts caused by strong nonlinearities, necessitating a quantum treatment that utilizes the full system Liouvillian. Based on our analysis, we identify a universal crossover parameter that delineates the regimes of validity of semiclassical and quantum descriptions, respectively. Our work shows how dynamical switching effects in strongly nonlinear systems provide a platform to study quantum-to-classical transitions.

Stroboscopic Qubit Measurement with Squeezed Illumination.

Microwave squeezing represents the ultimate sensitivity frontier for superconducting qubit measurement. However, measurement enhancement has remained elusive, in part because integration with standard dispersive readout pollutes the signal channel with antisqueezed noise. Here we induce a stroboscopic light-matter coupling with superior squeezing compatibility, and observe an increase in the final signal-to-noise ratio of 24%. Squeezing the orthogonal phase slows measurement-induced dephasing by a factor of 1.8. This scheme provides a means to the practical application of squeezing for qubit measurement.

Characterization of hidden modes in networks of superconducting qubits

We present a method for detecting electromagnetic (EM) modes that couple to a superconducting qubit in a circuit quantum electrodynamics architecture. Based on measurement-induced dephasing, this technique allows the measurement of modes that have a high quality factor (Q) and may be difficult to detect through standard transmission and reflection measurements at the device ports. In this scheme, the qubit itself acts as a sensitive phase meter, revealing modes that couple to it through measurements of its coherence time. Such modes are indistinguishable from EM modes that do not couple to the qubit using a vector network analyzer. Moreover, this technique provides useful characterization parameters including the quality factor and the coupling strength of the unwanted resonances. We demonstrate the method for detecting both high-Q coupling resonators in planar devices as well as spurious modes produced by a 3D cavity.

Characterization and Control of Measurement-Induced Dephasing on Superconducting Flux Qubit with a Josephson Bifurcation Amplifier

Quantum measurements play a central role in quantum information processing. Understanding the mechanism of the quantum measurements is essential to both improve the visibility of the readout and decrease the projection error during measurement. Here, we describe and demonstrate an experimental protocol for quantifying a measurement backaction when we readout a superconducting flux qubit using a Josephson bifurcation amplifier. The coupling with the Josephson bifurcation amplifier induces a dephasing on the flux qubit during the readout. We have succeeded in estimating and controlling the strength of such a measurement-induced dephasing by changing the pulse height of the microwave driving. Our results are crucial for designing a suitable quantum readout technique for the realization of practical quantum devices.

On-demand maximally entangled states with a parity meter and continuous feedback

Generating on-demand maximally entangled states is one of the cornerstones for quantum information processing. Parity measurements can serve to create Bell states and have been implemented via an electronic Mach-Zehnder interferometer among others. However, the entanglement generation is necessarily harmed by measurement-induced dephasing processes in one of the two parity subspaces. In this work, we propose two different schemes of continuous feedback for a parity measurement. They enable us to avoid both the measurement-induced dephasing process and the experimentally unavoidable dephasing, e.g., due to fluctuations of the gate voltages controlling the initialization of the qubits. We show that we can generate maximally entangled steady states in both parity subspaces. Importantly, the measurement scheme we propose is valid for implementation of parity measurements with feedback loops in various solid-state environments.

Vacuum-Fluctuation-Induced Dephasing of a Qubit in Circuit Quantum Electrodynamics

We investigate the measurement-induced dephasing of a qubit coupled with a single-mode cavity in the vacuum limit. Dephasing of the qubit state takes place through the ntanglement of the qubit and the single probe photon sent to the cavity, while the cavity mode never occupies a photon. We find that the qubit state is dephased even if the cavity is always in the vacuum state. This dephasing is caused purely by the interaction between the qubit and the vacuum field. We also show that this vacuum-fluctuation-induced dephasing takes place much faster than the spontaneous decay of the qubit excited state, and therefore our prediction is observable in a real experiment.

Undoing measurement-induced dephasing in circuit QED

We analyze the backaction of homodyne detection and photodetection on superconducting qubits in circuit quantum electrodynamics. Although both measurement schemes give rise to backaction in the form of stochastic phase rotations, which leads to dephasing, we show that this can be perfectly undone provided that the measurement signal is fully accounted for. This result improves upon that of Phys. Rev. A, 82, 012329 (2010), showing that the method suggested can be made to realize a perfect two-qubit parity measurement. We propose a benchmarking experiment on a single qubit to demonstrate the method using homodyne detection. By analyzing the limited measurement efficiency of the detector and bandwidth of the amplifier, we show that the parameter values necessary to see the effect are within the limits of existing technology.

Back-action of a driven nonlinear resonator on a superconducting qubit

We study the backaction of a driven nonlinear resonator on a multi-level superconducting qubit. Using unitary transformations on the multi-level Jaynes-Cummings Hamiltonian and quantum optics master equation, we derive an analytical model that goes beyond linear response theory. Within the limits of validity of the model, we obtain quantitative agreement with experimental and numerical data, both in the bifurcation and in the parametric amplification regimes of the nonlinear resonator. We show in particular that the measurement-induced dephasing rate of the qubit can be rather small at high drive power. This is in contrast to measurement with a linear resonator where this rate increases with the drive power. Finally, we show that, for typical parameters of circuit quantum electrodynamics, correctly describing measurement-induced dephasing requires a model going beyond linear response theory, such as the one presented here.

Quantum nondemolition measurements of a flux qubit coupled to a noisy detector

We theoretically study the quantum nondemolition measurements of a flux qubit coupled to a noisy superconducting quantum interference device (SQUID). The obtained analytical results indicate that the measurement probability is frequency-dependent in a short time scale and has a close relationship with the measurement-induced dephasing. Furthermore, when the detuning between the driven and bare resonator equals the coupling strength, we can obtain the maximum measurement rate that is determined by the character of the noise in the SQUID. Finally, we analysed the mixed effect caused by coupling between the non-diagonal term and the external variable. It is found that the initial information of the qubit is destroyed due to quantum tunneling between the qubit states.

Quantum measurement characteristics of a double-dot single electron transistor

Owing to a few unique advantages, the double-dot single electron transistor has been proposed as an alternative detector for charge states. In this work, we present a further study for its signal-to-noise property, based on a full analysis of the setup configuration symmetry. It is found that the effectiveness of the double-dot detector can approach that of an ideal detector, if the symmetric capacitive coupling is taken into account. The quantum measurement efficiency is also analyzed by comparing the measurement time with the measurement-induced dephasing time.

Qubit-photon interactions in a cavity: Measurement-induced dephasing and number splitting

We theoretically study measurement-induced dephasing of a superconducting qubit in the circuit QED architecture and compare the results to those obtained experimentally by Schuster et al. [Phys. Rev. Lett. 94, 123602 (2005)]. Strong coupling of the qubit to the resonator leads to a significant ac Stark shift of the qubit transition frequency. As a result, quantum fluctuations in the photon number populating the resonator cause dephasing of the qubit. We find good agreement between the predicted line shape of the qubit spectrum and the experimental results. Furthermore, in the strongly dispersive limit, where the Stark shift per photon is large compared to the cavity decay rate and the qubit linewidth, we predict that the qubit spectrum will be split into multiple peaks, with each peak corresponding to a different number of photons in the cavity.