Measured Performance Parameters Research Articles

Unveiling the Sub-10 GHz Performance of SMA Connectors: A Comparative Analysis

This research review article provides a detailed examination of SMA (SubMiniature version A) connectors, which are integral components in high-frequency electronic systems. Through extensive S-parameter and time-domain reflectometry (TDR) measurements conducted on various SMA connector constructions, this study aims to evaluate the performance and impact of SMA connectors on signal integrity. Results reveal insights into the comparative performance of different SMA connector types mounted on PCB land pads, highlighting their strengths and limitations. Additionally, this paper explores the application of reference plane cut-outs for discontinuity impedance compensation, aiming to enhance the frequency response of SMA connectors. By linking measured performance parameters with relative market prices, this study offers valuable insights into the economic viability of different SMA connector types. The best and worst performing SMA connector measurements reveal an S11 < −10 dB bandwidth of more than 8 GHz and 1.5 GHz and a transition impedance of 46.5 Ω and 21 Ω, respectively. Overall, this research contributes to advancing the understanding and selection of SMA connectors for RF applications in telecommunications, aerospace, medical devices, and beyond.

Predictive Wireless Received Signal Strength Using Friis Transmission Technique

A good WLAN performance is crucial in determining the quality of experience (QoE) among the campus community. Proper WLAN planning and design should be done beforehand to ensure good WLAN performance. Various studies have discussed different methods of conducting WLAN planning to predict WLAN's best performance, including using artificial intelligence and mathematical approaches. One of the processes involved in performing WLAN planning is measuring performance parameters. Signal strength is one of the vital parameters to be measured in determining the excellent performance of WLAN in a particular area. When deploying a WLAN design in two different environments, the signal strength outcomes can differ due to various factors, including obstacles and path loss propagation issues within the deployment area. Higher Learning Institutions (HLIs) present a unique challenge as their building designs vary to accommodate student needs. As a result, the selection of materials used will also be different, affecting the WLAN performance. A detailed study should investigate the effect of path loss propagation and the type of obstacle that affects WLAN performance in HLI. Thus, this study focuses on predicting received signal strength using Friis Transmission and studying the effect of path loss propagation on WLAN performance. The simulated model significantly affects signal strength when the signal passes through different types of building material (non-LOS) and line-of-sight (NLOS), where concrete walls substantially affect the received signal strength between transmitters. The proposed model can assist network planners in designing robust WLAN infrastructure by improving signal strength, particularly in the HLI WLAN environment.Â

The effect of high-intensity plyometric training on anaerobic performance parameters: a pilot study in U17 elite A league.

The aim of this study was to examine the effects of high-intensity plyometric training (HIPT) on some parameters in elite soccer players in the U17. Volunteer soccer players were randomly divided into two groups according to their positions: the regular training (RT) group (age: 16.71±0.47 years; stature: 163.46±3.31 cm; body weight: 61.04±1.59 kg) and the HIPT group (age: 16.64±0.50 years; stature: 165.60±3.03cm; body weight: 59.76±1.92 kg), and each group included five defenders, five midfielders, and four attackers. While the RT group did only routine soccer training, the HIPT group performed high-intensity plyometric training three days a week in addition to routine soccer training. In the study, body weight, stature, sprint (10 m, 30 m, and 40 m), jump (standing long jump, right and left-limb triple hop) and 5-0-5 change of direction speed test measurements of the soccer players were taken. Skewness and Kurtosis values obtained from the pre-test and post-test measurements were calculated to test whether the normality assumption of the study was met. A mixed measure two-way ANOVA test was used to determine the difference between the pre-test and post-test. The significance was set as p<0.05. The results indicated that 8-week high- intensity plyometric training provided more improvement in measured performance parameters than routine soccer training. As a result, when the data obtained is examined, it can be said that HIPT had better values in sprint, jump, and change of direction parameters, so plyometric training was more beneficial for anaerobic parameters than routine soccer training in children. It is recommended that the trainers make their plans considering these results.

Pre-matching study of the natural gas engine turbocharging system based on the coupling of experiments and numerical simulation

In this study, a pre-matching method was developed based on measured performance parameters and theoretical calculations of turbochargers. First, the turbocharger of a natural gas engine was subjected to a comprehensive performance experiment. According to the experimental results, the maximum efficiencies of the turbine and compressor are 70% and 75%, respectively, and the efficiency of the turbine drops sharply from 70% to 56.6% as the pressure ratio increases from 1.25 to 2.4. In this thesis, a specific turbocharger pre-matching software has been developed in conjunction with a database. Three turbines and three compressors were selected from the self-developed database for matching and comparative study using this method. The simulation results showed that the maximum efficiency of turbine #1, #2 and #3 is 71.3%, 72.2% and 72.7%, respectively, and the efficiency of these three turbines is concentrated between 65% and 72.5%. Obviously, the maximum efficiency of the turbine has increased by 1.3–2.7% and the overall efficiency has improved after the pre-matching. Therefore, this developed pre-matching method can reduce time cost, improve work efficiency and engine performance, and is important for the design and development of turbochargers.

SAFIR-I: first NEMA NU 4-2008-based performance characterization

BackgroundSmall Animal Fast Insert for MRI detector I (SAFIR-I) is a novel Positron Emission Tomography insert for a 7T\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$7\\,\\hbox {T}$$\\end{document} Bruker BioSpec 70/30 Ultra Shield Refrigerated Magnetic Resonance Imaging (MRI) system. It facilitates truly simultaneous quantitative imaging in mice and rats at injected activities as high as 500MBq\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$500\\,\\hbox {MBq}$$\\end{document}. Exploitation of the resulting high count rates enables quick image formation at few seconds per frame. In this investigation, key performance parameters of SAFIR-I have been determined according to the evaluations outlined in the National Electrical Manufacturers Association (NEMA) Standards Publication NU 4-2008 (NEMA-NU4) protocol.ResultsUsing an energy window of 391 to 601keV\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$601\\,\\hbox {keV}$$\\end{document} and a Coincidence Timing Window of 500ps\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$500\\,\\hbox {ps}$$\\end{document}, the following performance was observed: The average spatial resolution at 5mm\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$5\\,\\hbox {mm}$$\\end{document} radial offset (Full Width at Half Maximum) is 2.54mm\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$2.54\\,\\hbox {mm}$$\\end{document} when using Filtered Backprojection, 3D Reprojection reconstruction. For the mouse- and rat-like phantoms, the maximal Noise-Equivalent Count Rates (NECRs) are 1368kcps\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$1368\\,\\hbox {kcps}$$\\end{document} at the highest tested average effective concentration of 14.7MBqcc-1\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$14.7\\,\\hbox {MBq}\\,\\hbox {cc}^{-1}$$\\end{document}, and 713kcps\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$713\\,\\hbox {kcps}$$\\end{document} at the highest tested average effective concentration of 1.72MBqcc-1\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$1.72\\,\\hbox {MBq}\\,\\hbox {cc}^{-1}$$\\end{document}, respectively. The NECR peak is not yet reached for either of these cases. The peak sensitivity is 1.46%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$1.46\\,\\%$$\\end{document}. The Image Quality phantom uniformity standard deviation is 4.8%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$4.8\\,\\%$$\\end{document}. The Recovery Coefficient for the 5mm\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$5\\,\\hbox {mm}$$\\end{document} rod is (1.08±0.10)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(1.08 \\pm 0.10)$$\\end{document}. The Spill-Over Ratios are (0.22±0.03)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(0.22 \\pm 0.03)$$\\end{document} and (0.22±0.02)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(0.22 \\pm 0.02)$$\\end{document}, for the water- and air-filled cylinder, respectively. An accuracy of 4.3%\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$4.3\\,\\%$$\\end{document} was achieved for the quantitative calibration of reconstructed voxel values.ConclusionsThe measured performance parameters indicate that the various design goals have been achieved. SAFIR-I offers excellent performance, especially at the high activities it was designed for. This facilitates planned experiments with fast tracer kinetics in small animals. Ways to potentially improve performance can still be explored. Simultaneously, further performance gains can be expected for a forthcoming insert featuring 2.7 times longer axial coverage named Small Animal Fast Insert for MRI detector II (SAFIR-II).

A generic scope actuation system for flexible endoscopes

BackgroundA scope actuation system assists a surgeon in steering a scope for navigating an operative field during an interventional or diagnostic procedure. Each system is tailored for a specific surgical procedure. The development of a generic scope actuation system could assist various laparoscopic and endoscopic procedures. This has the potential to reduce the deployment and maintenance costs for a hospital, making it more accessible for clinical usage.MethodsA modular actuation system (for maneuvering rigid laparoscopes) was adapted to enable incorporation of flexible endoscopes. The design simplifies the installation and disassembly processes. User studies were conducted to assess the ability of the system to focus onto a diagnostic area, and to navigate during a simulated esophagogastroduodenoscopy procedure. During the studies, the endoscope was maneuvered with (robotic mode) and without (manual mode) the actuation system to navigate the endoscope’s focus on a predefined track.ResultsResults show that the robotic mode performed better than the manual mode on all the measured performance parameters including (a) the total duration to traverse a track, (b) the percentage of time spent outside a track while traversing, and (c) the number of times the scope focus shifts outside the track. Additionally, robotic mode also reduced the perceived workload based on the NASA-TLX scale.ConclusionsThe proposed scope actuation system enhances the maneuverability of flexible endoscopes. It also lays the groundwork for future development of modular and generic scope assistant systems that can be used in both laparoscopic and endoscopic procedures.

Operational risk assessment for hydroelectric generating units using multi-head spatio-temporal attention and adaptive fuzzy clustering

A novel operational risk assessment method for hydroelectric generating units (HGUs) is presented in this article. First, a multi-head spatio-temporal attention gated network (MSTAGN) is proposed to establish an operation risk benchmark model for HGUs to reveal the intricate relationship between performance and its multiple influencing factors. In particular, MSTAGN learns complex interaction relationships among multiple influencing factors in both temporal and spatial dimensions and automatically extracts important features. Then, a nonlinear mapping function is constructed to extract the deviation of the current measured performance parameters from the predicted baseline performance parameters as the operation risk degree. On this basis, an adaptive fuzzy clustering algorithm is proposed to achieve a clear classification of the operating risk level for HGUs. The proposed method is applied in a HGU in Sichuan province, China. The results of comparative experiments demonstrate its viability and efficacy.

Improvising academic research in an Ayurved Institute: A promising experiment

Research is most essential for professional development and growth of a sector particularly in the field of healthcare delivery. After more than 5 decades of expansive institutionalization ayurvedic education – learning and training – is faced with competitive capabilities. In a highly dynamic environment of career opportunities academic institutions are acquisitive to academic research for identity and sustainability. Academic research as a part of higher education in Ayurved has been a challenge due to several reasons, paradigm difference being the main. A pioneering effort undertaken by an Ayurvedic institute to improve its academic research performance with outsourced professional help had remarkable success. The activity driven by an expert with a change mechanism model with teacher, faculty as a focus, identified core issues and helped address it within the prevailing structure in a systematic manner. It innovatively developed measurable performance parameters for individual growth and outcome parameters for the institutional gains. It effectively helped bridge the gap between two parallel streams of principles and practices for research. The attempt elucidated the significance of academic research as an essential tool of learning and training beyond a mandatory requirement thereby evolving positive environment for research. This successful experiment could be utilized by other institutes and could be modified for its wider application for sustainable gains in terms of knowledge and competitiveness for acquiring academic professional efficiency in field of Ayurved.

Aquatic product hydrolysates increase rearing performance in red seabream (Pagrus major), fed a low fish meal diet, in both controlled and stressed conditions: From growth to stress responses

Although aquaculture industry has made great efforts to reduce the levels of fish meal (FM) in aquaculture feeds, further efforts and investigations are still needed to increase aquaculture production, which has more than tripled in the last two decades. This study was implemented to Six replicate groups of fish (24.6 ± 0.1 g) were fed one of the experimental diets to apparent satiety twice daily for 15 weeks; half of them were subjected to a daily net chasing stress for 1 min in the morning, 1 h before feeding. At the end of the feeding trial, fish were challenged with Edwarselia tarda injection. LFM diet resulted in comparable growth and feed efficiency performance to HFM group. However, significant impairments were observed in apparent digestibility coefficients, condition factor, hematocrit and serum super oxide dismutase activity. Fish fed LFM showed much lower resistance to E. tarda challenge. Both TH and SH resulted in enhanced fish nutritional and health performance with significant improvements in growth performance, feed efficiencies, digestibility, serum non-specific immunity and gut morphometric parameters. Fish fed TH and SH also exhibited the highest survival after E. tarda challenge. Principal component analysis (PCA) showed significant differences between stress and dietary groups for dimension 1 (33.3% of the variability), which was mostly characterized by growth and health variables. SH and TH coordinates were significantly higher on dimension 1 compared to HFM and LFM ones. Daily repeated stress affected most of measured performance parameters of all dietary groups with very few interactions. The stressed fish groups fed TH or SH showed lower cortisol levels compared to those fed HFM and LFM (p < 0.01). Strong correlations were observed between feed efficiency and fish gut morphometrics as quantified by villi length, enterocyte height and goblet cell density. Dietary supplementation of aquatic protein hydrolysates such as TH and SH appeared to be essential for maintaining good fish performance when they were subjected to a daily husbandry stressor or to an infectious challenge.

Analyzing the Performance of Thermoelectric Generators with Inhomogeneous Legs: Coupled Material–Device Modelling for Mg2X-Based TEG Prototypes

Thermoelectric generators (TEGs) possess the ability to generate electrical power from heat. As TEGs are operated under a thermal gradient, inhomogeneous material properties—either by design or due to inhomogeneous material degradation under thermal load—are commonly found. However, this cannot be addressed using standard approaches for performance analysis of TEGs in which spatially homogeneous materials are assumed. Therefore, an innovative method of analysis, which can incorporate inhomogeneous material properties, is presented in this study. This is crucial to understand the measured performance parameters of TEGs and, from this, develop means to improve their longevity. The analysis combines experimental profiling of inhomogeneous material properties, modelling of the material properties using a single parabolic band model, and calculation of device properties using the established Constant Property Model. We compare modeling results assuming homogeneous and inhomogeneous properties to the measurement results of an Mg2(Si,Sn)-based TEG prototype. We find that relevant discrepancies lie in the effective temperature difference across the TE leg, which decreases by ~10%, and in the difference between measured and calculated heat flow, which increases from 2–15% to 9–16% when considering the inhomogeneous material. The approach confirms additional resistances in the TEG as the main performance loss mechanism and allows the accurate calculation of the impact of different improvements on the TEG’s performance.

Scope actuation system for articulated laparoscopes

BackgroundAn articulated laparoscope comprises a rigid shaft with an articulated distal end to change the viewing direction. The articulation provides improved navigation of the operating field in confined spaces. Furthermore, incorporation of an actuation system tends to enhance the control of an articulated laparoscope.MethodsA preliminary prototype of a scope actuation system to maneuver an off-the-shelf articulated laparoscope (EndoCAMaleon by Karl Storz, Germany) was developed. A user study was conducted to evaluate this prototype for the surgical paradigm of video-assisted thoracic surgery. In the study, the subjects maneuvered an articulated scope under two modes of operation: (a) actuated mode where an operating surgeon maneuvers the scope using the developed prototype and (b) manual mode where a surgical assistant directly maneuvers the scope. The actuated mode was further assessed for multiple configurations based on the orientation of the articulated scope at the incision.ResultsThe data show the actuated mode scored better than the manual mode on all the measured performance parameters including (a) total duration to visualize a marked region, (a) duration for which scope focus shifts outside a predefined visualization region, and (c) number of times for which scope focus shifts outside a predefined visualization region. Among the different configurations tested using the actuated mode, no significant difference was observed.ConclusionsThe proposed articulated scope actuation system facilitates better navigation of an operative field as compared to a human assistant. Secondly, irrespective of the orientation in which an articulated scope’s shaft is inserted through an incision, the proposed actuation system can navigate and visualize the operative field.

Precursor-derived in-water peracetic acid impacts on broiler performance, gut microbiota, and antimicrobial resistance genes

Past antimicrobial misuse has led to the spread of antimicrobial resistance amongst pathogens, reportedly a major public health threat. Attempts to reduce the spread of antimicrobial resistant (AMR) bacteria are in place worldwide, among which finding alternatives to antimicrobials have a pivotal role. Such molecules could be used as "green alternatives" to reduce the bacterial load either by targeting specific bacterial groups or more generically, functioning as biocides when delivered in vivo. In this study, the effect of in-water peracetic acid as a broad-spectrum antibiotic alternative for broilers was assessed via hydrolysis of precursors sodium percarbonate and tetraacetylethylenediamine. Six equidistant peracetic acid levels were tested from 0 to 50 ppm using four pens per treatment and 4 birds per pen (i.e., 16 birds per treatment and 96 in total). Peracetic acid was administered daily from d 7 to 14 of age whilst measuring performance parameters and end-point bacterial concentration (qPCR) in crop, jejunum, and ceca, as well as crop 16S sequencing. PAA treatment, especially at 20, 30, and 40 ppm, increased body weight at d 14, and feed intake during PAA exposure compared to control (P < 0.05). PAA decreased bacterial concentration in the crop only (P < 0.05), which was correlated to better performance (P < 0.05). Although no differences in alpha- and beta-diversity were found, it was observed a reduction of Lactobacillus (P < 0.05) and Flectobacillus (P < 0.05) in most treatments compared to control, together with an increased abundance of predicted 4-aminobutanoate degradation (V) pathway. The analysis of the AMR genes did not point towards any systematic differences in gene abundance due to treatment administration. This, together with the rest of our observations could indicate that proximal gut microbiota modulation could result in performance amelioration. Thus, peracetic acid may be a valid antimicrobial alternative that could also positively affect performance.

Optimization of combustion parameters for CRDI small single cylinder diesel engine by using response surface method

Limited fossil fuel’s reservoir capacity and pollution caused by them are the big problem today in the world. The small diesel engine, working with a conventional fuel injection system was the major contributor to this. The current study represented a statistical investigation of such a small diesel engine. A mechanical fuel injection system of the small diesel engine was retofitted with a simple version of the electronic common rail diesel injection (CRDI) system in the present study. The effect of combustion parameters such as compression ratio (CR), injection pressure (IP) and start of injection timing (IT) was considered in the study. The study was performed to optimize these parameters with respect to performance and emission aspects. The reduction in parameters such as carbon monoxide (CO), nitrogen oxides (NOx), smoke and hydrocarbon (HC) from engine exhaust gases were considered in the emission aspect. Improve brake thermal efficiency (BTE) and fuel economy was considered in the performance aspect. The response surfaced method (RSM) was used to optimise these combustion parameters. The regression equations were obtained for measurable performance and emission parameters using the RSM model. The surface plots derived from the regression equations were used to analyse the effect of considered combustion parameters. Diesel injected at a pressure 600 bar, with retarded injection timing 15° crank angle (CA) before top dead center (bTDC) and compression ratio set at 15 was found to be optimum for this CRDI small diesel engine. The further validation of optimum parameters was done by conducting a confirmatory test on the engine. The maximum error in prediction was found to be 2.7%, which shows the validation of the RSM model.

Effect of operating parameters on decortication of Jatropha curcas fruits

A Jatropha decorticator was designed, fabricated and its performance evaluation was carried out. Measured performance parameters included Decorticating efficiency, Cleaning efficiency, Percentage seed loss, Mechanical damaged index, and Decorticating performance index. A 5 × 2 × 2 factorial experiment in Completely Randomized Design was used to investigate the performance of the machine. The highest Decorticating efficiency, Cleaning efficiency and Decorticating performance index were 93.25%, 93% and 91.28% respectively. The lowest Percentage seed loss and Mechanical damage index were 1.49% and 1.19% respectively. More seed loss was experienced as the machine speed increased. Also, seed breakage was recorded at higher machine speed. Hence, biodiesel production from Jatropha would be highly productive and sustainable with this decorticating machine.

A 12-bit, 1.1-GS/s, Low-Power Flash ADC

In this article, an efficient architecture for a low-power, high-resolution flash analog-to-digital converter (flash ADC) is presented. It operates at 12-bit resolution with a sampling frequency of 1.1 GS/s. The architecture is a segmented one consisting of three subflash ADCs that we call SADC1, SADC2, and SADC3. During the operation, SADC1 detects the MSB bit, and SADC2 detects the intermediate bits, while SADC3 detects the finer bits of the flash ADC. Furthermore, SADC1 has a 1-bit resolution, SADC2 has a 6-bit resolution, and SADC3 has a 5-bit resolution. The binary operation related to 12-bit resolution is achieved by combining the subflash ADCs, thermometer digital outputs, and an encoder. The ADC has been fabricated in Global Foundry (GF) 65-nm standard CMOS process. The measured performance parameters show a differential nonlinearity (DNL) of &#x00B1;0.24 LSB, an integral nonlinearity (INL) of &#x00B1;0.45 LSB, a signal-to-noise and distortion ratio (SNDR) of 64.55 dB, a spurious-free dynamic range (SFDR) of 73.9 dB, and an effective number of bits (ENOB) of 10.43 bits. Also, power consumption is found to be 15.10 mW at 1.1-GS/s sampling frequency and 1.2-V supply voltage. The ADC achieves an FOM of 9.95 fJ/conversion-step (c-s) at the Nyquist input frequency and occupies a core area of 0.084 mm².

A Wideband E/W-Band Low-Noise Amplifier MMIC in a 70-nm Gate-Length GaN HEMT Technology

This article reports on a gallium-nitride (GaN) low-noise amplifier (LNA) monolithic microwave integrated circuit (MMIC) with a 3-dB gain bandwidth (BW) from 63 to 101 GHz. The MMIC is fabricated in the Fraunhofer IAF 70-nm GaN-on-silicon-carbide (SiC) high-electron-mobility transistor (HEMT) technology. The four-stage common-source LNA exhibits an average noise figure (NF) of 3 dB for a measured frequency range from 75 to 101 GHz. The MMIC reaches a minimum NF of 2.8 dB at an operating frequency of 83 GHz. A mapping of two 100-mm wafers shows an excellent homogeneity with an 86% yield and an average NF of 3–3.3 dB. At 100 GHz, the LNA obtains output-referred 1-dB compression and third-order intercept points of 12.1 and 14.4 dBm, respectively. Furthermore, comprehensive investigations of the bias dependence of all measured performance parameters provide an insight into the presented device and LNA. To the best of the authors’ knowledge, this MMIC demonstrates the lowest NF among GaN LNAs at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${E}/{W}$ </tex-math></inline-formula> -band frequencies.

Tolerance and safety evaluation of L-glutamic acid, N,N-diacetic acid as a feed additive in broiler diets

The novel chelator, L-glutamic acid, N,N-diacetic acid (GLDA) can be used as a dietary ingredient to safely reduce Zn supplementation in complete feed, without compromising the Zn status of farm animals. The objective of this study was to study dietary tolerance, bioaccumulation, and evaluate the safety of GLDA when supplemented in broiler diets at 0, 100, 300, 1000, 3,000, and 10,000 mg/kg. A total of 480 one-day-old Ross 308 male broilers were randomly allocated to 48 pens and fed one of the 6 experimental diets. Production performance was used to assess tolerance to the additive. At trial end, toxicity was evaluated using hematology, plasma biochemistry (n = 144) and gross necropsy (n = 48). Residue levels of GLDA were assessed in liver, kidney and breast tissue of birds used for necropsy. Performance showed an increase (P < 0.05) in body weight for GLDA inclusion at 300 mg/kg. A decrease on the measured performance parameters was found for the 10,000 mg/kg GLDA inclusion level (P < 0.05). The additive was added as a tetra-sodium salt, leading to sodium levels being 2.5 times higher in the latter treatment compared to the control diet which may have led to impaired intestinal barrier function. Mortality was not different between treatments. Residue levels for GLDA at the highest inclusion indicate that 0.0005% of total GLDA consumption is accumulated in breast tissue. Higher values of GLDA were found in kidney and liver at the highest inclusion level, potentially confirming that the small fraction of GLDA absorbed was readily excreted by the animal. At 100 and 300 mg/kg GLDA inclusion there were negligible amounts of GLDA present in all tissues measured. The present experiment demonstrated a high dietary tolerance to GLDA in broilers and indicated that GLDA does not pose a significant risk to food safety when supplemented below 3,000 mg/kg.

Distal femur versus humeral or tibial IO, access in adult out of hospital cardiac resuscitation

BackgroundIntraosseous (IO) vascular access is a well-established method for fluid and drug administration in the critically ill. The Food and Drug Administration has approved adult IO access at the proximal humerus, proximal tibia, and the sternum; all three sites have significant limitations. The Distal Femur is away from the chest, with high flow rates. The objective of this study was to evaluate the distal femur site during resuscitation of adult out-of-hospital cardiac arrest. MethodsA retrospective analysis of adult out of hospital cardiac arrest patients treated by the San Antonio Fire Department. IO access was obtained by first-responders (paramedics or EMT-basic) or EMS paramedics. All resuscitation attempts from 2017 to 2018 data were analyzed. The protocol did not dictate the preference of IO site. The primary measure: number of OHCA patients in each subgroup: IO femur, IO humerus, IO tibia. Secondary measures: paramedic or basic operator, dislodgement rate, and total fluid infused. ResultsThere were 2,198 patients meeting inclusion criteria: 888 femur, 696 humerus, 432 tibia. Distal femur increased 2.5 times in the 2018 cohort compared to the 2017 cohort, with a corresponding decrease in humerus (factor of 0.29). Proximal tibia remained unchanged. Dislodgement rates and total infusion (ml) remained unchanged. ConclusionsThe distal femur IO was feasible and associated with similar measured performance parameters as other IO sites in adult OHCA for both advanced and basic life support personnel.

Design Of Teller Performance Assesment Application Using Fuzzy Logic With Sugeno Method

The teller performance assessment used by several banks still uses performance parameters that cannot be measured properly. Fuzzy logic using the Sugeno method can be applied to evaluate more measurable performance parameters. This paper describes the design of a teller performance assessment application in a fuzzy logic-based bank using the Sugeno method. As parameters for performance indicators, 4 parameters were chosen: time discipline, behavior attitude, work performance, and achievement from the teller. The output of the application is the performance value of the assessment object (teller) which can be used for further needs.

The fast multi-frame X-ray diffraction detector at the Dynamic Compression Sector.

A multi-frame, X-ray diffraction (XRD) detector system has been developed for use in time-resolved XRD measurements during single-event experiments at the Dynamic Compression Sector (DCS) at the Advanced Photon Source (APS). The system is capable of collecting four sequential XRD patterns separated by 153 ns, the period of the APS storage ring in the 24-bunch mode. This capability allows an examination of the temporal evolution of material dynamics in single-event experiments, such as plate impact experiments, explosive detonations, and split-Hopkinson pressure bar experiments. This system is available for all user experiments at the DCS. Here, the system description and measured performance parameters (detective quantum efficiency, spatial and temporal resolution, and dynamic range) are presented along with procedures for synchronization and image post-processing.