Maximum Wavelength Sensitivity Research Articles

A novel design of symmetrical grating built on D-shaped optical fiber sensor-based surface plasmon resonance

Surface Plasmon Resonance (SPR) is an electromagnetic phenomenon that occurs during the interaction between metals and dielectric materials. Fiber sensors show much attention in the last few decades because of their extremely sensitive performance. A novel design of a Dual symmetrical grating D-shaped fiber (Dual SGD-SF) based plasmonic sensor was theoretically studied. The effects of grating depth and gold and silver thickness were investigated. For the Dual SGD-SF sensor design at analyte RI = 1.5 and grating depth = 0.3 μm, the resonance wavelength at the maximum loss was 2.4 μm. The maximum wavelength sensitivity, resolution, and FOM for Dual SGD-SF were obtained at 2000 nm/RIU, 0.00005 RIU, and 22.22 RIU−1, respectively. This design was proposed for sensing very low concentrations of analyte and helps to discover the variations of refractive indices compared to high-purity liquids. To the best of our knowledge, using a symmetrical grating design as a refractive index sensor has not previously been reported.

A Highly Sensitive D-Shaped PCF-SPR Sensor for Refractive Index and Temperature Detection

A novel highly sensitive D-shaped photonic crystal fiber-based surface plasmon resonance (PCF-SPR) sensor for dual parameters of refractive index and temperature detecting is proposed. A PCF cladding polishing provides a D-shape design with a gold (Au) film coating for refractive index (RI) sensing (Core 1) and a composite film of silver (Ag) and polydimethylsiloxane (PDMS) for temperature sensing (Core 2). Comsol Multiphysics 5.5 is used to design and simulate the proposed sensor by the finite element method (FEM). The proposed sensor numerically provides results with maximum wavelength sensitivities (WSs) of 51,200 and 56,700 nm/RIU for Core 1 and 2 as RI sensing while amplitude sensitivities are −98.9 and −147.6 RIU−1 with spectral resolution of 1.95 × 10−6 and 1.76 × 10−6 RIU, respectively. Notably, wavelength sensitivity of 17.4 nm/°C is obtained between −20 and −10 °C with resolution of 5.74 × 10−3 °C for Core 2 as temperature sensing. This sensor can efficiently work in the analyte and temperature ranges of 1.33–1.43 RI and −20–100 °C. Due to its high sensitivity and wide detection ranges, both in T and RI sensing, it is a promising candidate for a variety of applications, including chemical, medical, and environmental detection.

Simulation analysis of a photonic crystal fiber refractive index sensor based on a double-layer film structure and surface plasmon resonance technology

A photonic crystal fiber surface plasmon resonance sensor based on a double-layer membrane structure is designed and analyzed. In the simple sensing structure with only one air hole size, TiO2 and Au layers with specific thicknesses are sequentially coated on the optical fiber to form a double-layer structure. The sensing characteristics of the double-layer membrane structure are studied by the finite element method. Compared to the single-layer membrane structure, the double-layer membrane sensor has significant sensing properties such as a better wavelength sensitivity and a smaller full width at half maximum in the loss spectrum. In the refractive index range between 1.37 and 1.43, the maximum wavelength sensitivity and average wavelength sensitivity of the sensor are 19,900 nm/RIU and 7417 nm/RIU, respectively, and the resolution can be up to 5.03×10−6RIU. The proposed photonic crystal fiber optic sensor achieves high performance with a simpler sensing structure than previous photonic crystal fiber optic sensors, and eliminates the step of polishing, which will greatly reduce the difficulty of actual fabrication and the error due to uneven polishing. The results show that the photonic crystal fiber optic sensor with a double-layer membrane structure has excellent performance. Due to its high sensitivity and resolution, it has great potential for applications in environmental monitoring, biosensing and chemical sensing.

Gold-coated D-shaped photonic crystal fiber refractive index sensor with a wide detection range and large manufacturing tolerance

A D-shaped photonic crystal fiber refractive index (RI) sensor is designed, and its performance is analyzed using the finite element method (FEM). A gold film is coated on the D-shaped surface of the fiber as a plasmonic material for surface plasmon resonance sensing. The U-shaped arrangement of holes of the same size in the fiber structure enhances the coupling resonance between the core mode and the surface plasmon polariton mode. Numerical results show that the RI range of the sensor is 1.20–1.40, the maximum wavelength sensitivity is 16008.98 nm/RIU, and the detection width is up to 0.2 RIU. In addition, this study analyzes the manufacturing tolerance for the sizes of the air holes. The results show that the manufacturing tolerance for the three types of air holes is as high as 25%, 11.1%, and 10.2% when h is 40µm. These findings lay the foundation for the mass production of sensors. The above results indicate that the sensor has remarkable advantages such as enhanced sensitivity, wide measurement range, and exceptional manufacturing stability, and has promising applications in the fields of bio-detection, drug supply detection, and water pollution control.

Optical properties of La2MgSnO6: Eu3+/Mn4+ double-perovskite phosphors for multifunctional applications

A series of Eu3+/Mn4+ doped La2MgSnO6 double-perovskite phosphors were successfully synthesized by solid-state method. The crystal structure, optical properties, and temperature sensitivity of the phosphors were investigated systematically. Under excitation at 310 and 394 nm, the La2MgSnO6: Eu3+, Mn4+ phosphor exhibits intense red emission of Mn4+ (2Eg→4A2g) and orange-red emission of Eu3+ (5D0→7F2). Within the temperature range of 298–473 K, Eu3+ exhibits excellent thermal stability, whereas the Mn4+ shows significant thermal quenching behavior. A luminescence thermometer for dual-wavelength operation with high sensitivity was designed based on the fluorescence intensity ratio (FIR) method. The value of maximum relative sensitivity (Sr) was calculated as 1.58 % K−1 at 423 K. Particularly, the wavelength-dependent of La2MgSnO6: Eu3+, Mn4+ phosphor was investigated over a range of 270–340 nm, revealing promising potential with a remarkably high maximum wavelength sensitivity of 18.2 % nm−1 at 300 nm. Subsequently, a prototype LED device was fabricated by integrating the La2MgSnO6: Eu3+, Mn4+ phosphors and a near-UV LED chip, demonstrating significant spectral overlap with the absorption curves of plant pigments. These results suggest that the La2MgSnO6: Eu3+, Mn4+ multifunctional phosphor has promising applications in optical thermometry, wavelength detection, and promoting plant growth.

Symmetrical dual-D and dual-core single-mode fiber surface plasmon resonance liquid sensor

A symmetrical dual-D and dual-core single-mode fiber surface plasmon resonance (SPR) liquid sensor is designed for biological detection. The dual-core design optimizes the transmission path, improves the momentum matching between free electrons and photons, and facilitates bidirectional coupling, consequently amplifying the SPR effect and enabling sensitive monitoring of the refractive index changes of biological solutions. In this structure, a gold wire is placed in the middle of the polished surface of the double-D-shaped single-mode fiber (SMF) to produce high-quality free electrons and promote the mode-coupling excitation of the SPR effect. The characteristics of the sensor are analyzed by the finite element method, and the important structural parameters are optimized systematically. The sensor can be operated in the near-infrared region for a refractive index (RI) range of 1.31–1.40 with a maximum wavelength sensitivity (WS) of 21,000 nm/RIU, amplitude sensitivity of 586.62RIU−1, as well as resolution of 4.76×10−6RIU. Small changes in the refractive index can be detected by the sensor and it can be produced easily by conventional manufacturing techniques. The sensor thus has wide application prospects in biomedical and chemical analysis and related applications.

Side-Opened Hollow Fiber-Based SPR Sensor for High Refractive Index Detection.

To facilitate the sensor fabrication and sensing operation in microstructured optical fiber-based surface plasmon resonance (SPR) sensors for high refractive index (RI) detection, we propose a special hollow fiber-based SPR sensor that comprises an opening on its body side and a thin gold layer coated on its outer surface. The analyte is able to flow into the hollow core through the side-opening to form new fiber core, with the Gaussian-like mode propagating in it. We investigate the sensing performance of the proposed sensor in a higher RI range of 1.48 to 1.54 at two feasible schemes: one is to only fill the fiber core with analyte (Scheme A), and the other is to directly immerse the sensor in the analyte (Scheme B). The results demonstrate that our sensor exhibits higher wavelength sensitivity at Scheme A with a maximum wavelength sensitivity of 12,320 nm/RIU, while a greater amplitude sensitivity was found at Scheme B with a maximum amplitude sensitivity of 1146 RIU-1. Our proposed sensor features the advantages of simple fabrication, flexible operation, easy analyte filling and replacing, enhanced real-time detection capabilities, high RI detection, and very high wavelength sensitivity and amplitude sensitivity, which makes it more competitive in SPR sensing applications.

Numerical analysis of a single channel exposed core elliptical shaped PCF based highly sensitive SPR sensor for wide RI sensing

This study presents a numerical study of a highly sensitive photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor capable of detecting five types of cancer and bacterial contamination in water. By precisely arranging only two air holes in a single channel of an elliptical-shaped PCF, the sensor maximizes interaction between core-guided modes and surface plasmon polaritons (SPP) along the fiber. Evaluation using COMSOL Multiphysics simulation software, based on finite element method (FEM), demonstrates outstanding sensor performance across a wide refractive index (RI) range (1.33 to 1.43). With a maximum wavelength sensitivity (WS) of 188,000 nm/RIU and amplitude sensitivity (AS) of -22,377.99 RIU−1, the sensor achieveStructural Design and Methodologys a sensor resolution (SR) of 5.3191 × 10−7 RIU and figure of merit (FOM) of 854.55 RIU−1. Notably, it exhibits AS and WS values tailored for specific cancer cell types and water contamination. These results endorse the sensor’s potential in diverse biological and molecular analyte RI detection applications within the visible to near-infrared (VNIR) range (0.55 to 4 µm), offering high sensitivity, affordability, wide sensing range, good linearity, low propagation loss, and simplicity in construction.

Surface plasmon resonance photonic crystal fiber biosensor: Utilizing silver-phosphorene nanoribbons for Near-IR detection

In recent years, the utilization of two-dimensional materials in photonic crystal fiber structures has developed the capabilities of biosensors in biological and biochemical applications. A photonic crystal fiber biosensor based on surface plasmon resonance with silver and phosphorene layers is proposed in this paper. Phosphorene helps with the prevention of oxidation of the silver layer used as a plasmonic active metal. The sensor performance can be optimized by changing the structural parameters. The maximum wavelength sensitivity obtained was 1800 nm/RIU in the dynamic index range of 1.39–1.45, and the proposed sensor also showed the maximum amplitude sensitivity of 268 RIU−1 with an analyte refractive index of 1.40. The performance of the proposed sensor was analyzed using the finite element method. The results show that using phosphorene may open a new window for the study of online biomolecular interaction.

A PCF-SPR sensor for dual-polarization and wide refractive index detection range

In this paper, we design a novel H-shaped photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor, which is composed of a dual-sided U-shaped groove and an Ag–MoS2 coating. The proposed sensor exhibits an asymmetrical structure with birefringence, which provides a possible way to detect the refractive index (RI) of analytes with dual-polarization. Based on the finite element method (FEM) simulations, the influences of the structural parameters on the sensing performances are discussed. For y-polarization, the proposed sensor detects the changes of RI from 1.37 to 1.41 with a maximum wavelength sensitivity of 11,700 nm/RIU, while for x-polarization, RI changes from 1.29 to 1.35 with a maximum sensitivity of 7800 nm/RIU. Thus, a PCF-SPR sensor with dual-polarization and wide RI detection range is achieved, which holds significant promise for applications in biology, medicine, and food safety.

High sensitivity and wide detection range temperature and refractive index photonic crystal fiber sensor

A D-shaped surface plasmon resonance temperature and refractive index (RI) sensor based on photonic crystal fiber is proposed. The fiber core is composed of five air holes arranged in a pentagonal shape, which effectively improves the sensitivity. The gold film is used as a plasmonic material, and the mixture of ethanol and chloroform is used as a temperature sensitive liquid. A finite element method with higher accuracy and stronger applicability is used to study the performance of the sensor. The results indicate that when filling the mixture, the temperature sensor can detect the temperature in the range of 0 °C–60 °C. A maximum temperature sensitivity of 11.0 nm °C−1 is obtained by filling the mixture. The RI sensor can detect RI in the range of 1.13–1.40, with the wavelength range of 1.2–2.4 μm, and the maximum wavelength sensitivity reaches up to 21 000 nm RIU−1. The sensor can be used in biomedicine, environmental monitoring, food detection, temperature detection and other related fields, and has certain competitiveness and commercial value.

A novel butterfly-shaped core mode-based asymmetric slotted sensor for ultra-high sensitivity in sucrose concentration detection

In this research, we proposed an asymmetric rectangular slotted biosensor using photonic crystal fiber (PCF), which is subject to surface plasmon resonance (SPR). The proposed sensor utilizes only seven air holes, ensuring better fabrication feasibility and their properties are determined through finite element method (FEM)-based numerical analysis. To simplify the manufacturing process and ensure chemical stability, chemically impermeable gold (Au) strips are employed around the perimeter of the structure as the plasmonic material. With effective structural parameters, the maximum amplitude sensitivity for the proposed sensor is 663.13 RIU−1, the maximum wavelength sensitivity is 204,000 nm/RIU, and the maximum wavelength resolution is 4.90 × 10−7RIU for the y-polarized mode. It also shows a high linearity of 0.9849. For the detection of sucrose content, it has a maximum wavelength sensitivity of 207070.71 nm/RIU and a maximum amplitude sensitivity of 662.80 RIU−1. The newly introduced sensor can detect the refractive index (RI) of various analytes across a broad spectrum, ranging from 1.28 to 1.41. This extensive detection range allows the sensor to precisely measure sucrose concentrations up to 40%. This broad range enables the analysis of various analytes like sucrose, viruses, cancer cells, proteins, and numerous others.

A PCF Sensor Design Using Biocompatible PDMS for Biosensing.

A novel photonic crystal fiber (PCF) sensor for refractive index detection based on polydimethylsiloxane (PDMS) is presented in this research, as well as designs for single-channel and dual-channel structures for this PDMS-PCF sensor. The proposed structures can be used to develop sensors with biocompatible polymers. The performance of the single-channel PDMS-PCF sensor was studied, and it was found that adjusting parameters such as pore diameter, lattice constant, distance between the D-shaped structure and the fiber core, and the radius of gold nanoparticles can optimize the sensor's performance. The findings indicate that the detection range of the single-channel photonic crystal is 1.21-1.27. The maximum wavelength sensitivity is 10,000 nm/RIU with a resolution of 1×10-5 RIU, which is gained when the refractive index is set to 1.27. Based on the results of the single-channel PCF, a dual-channel PDMS-PCF sensor is designed. The refractive index detection range of the proposed sensor is 1.2-1.28. The proposed sensor has a maximum wavelength sensitivity of 13,000 nm/RIU and a maximum resolution of 7.69×10-6 RIU at a refractive index of 1.28. The designed PDMS-PCF holds tremendous potential for applications in the analysis and detection of substances in the human body in the future.

Surface plasmon resonance methane sensor based on the D-type photonic quasi-crystal fiber with double-layer films

A high-sensitivity photonic quasi-crystal fiber surface plasmon resonance (PQF-SPR) methane sensor is designed and analyzed. The six-fold Penrose PQF has a D-type structure with two grooves on which TiO2 and Au films are deposited, and methane-sensitive film containing cryptophane-E is coated on the surface of the D-type structure. The characteristics of the sensor are analyzed by the finite element method and the influence of different coating materials (Au-TiO2, Au-MgF2, Au-ITO) on the sensitivity and FOM of the sensor is analyzed and compared. The results show that the PCF-SPR sensor with the dual Au-TiO2 film has better sensing properties. The maximum wavelength sensitivity and average wavelength sensitivity reach 40 nm/% and 34.74 nm/% in the methane concentration range of 0–3.5 % respectively. These properties are significantly better than those of similar sensors reported recently, and the sensor thus has large potential in the development of high-sensitivity and miniaturized methane sensors.

PCF Based Four-Channel SPR Biosensor With Wide Sensing Range.

In this article, we have demonstrated a highly sensitive four-channel photonic crystal fiber (PCF) based surface plasmon resonance (SPR) biosensor which can detect four different analytes simultaneously. To ease practical implementation, four analyte sensing layers and plasmonic materials such as gold (Au) and gold (Au) with Tantalum Pentoxide (Ta2O5) are placed on the exterior of the four arms of the square shaped structure. The sensor's structure consists of only nine circular air holes, making it simple and easy to fabricate using currently available technologies. Finite element method (FEM) based numerical analysis is used to evaluate the sensing performance of the proposed sensor. With optimum structure parameters, the sensor achieves maximum wavelength sensitivity of 11000, 25000, 11000 and 25000 nm/RIU for Channel-1, Channel-2, Channel-3, and Channel-4 respectively. It shows maximum amplitude sensitivity of 803.732, 709.171, 803.827, 709.146 RIU -1 for Channel 1, 2, 3, and 4 respectively. It also shows maximum FOM of 232.55, 352.36, 231.57, 352.36 RIU -1 in Ch-1, Ch-2, Ch-3 and Ch-4 respectively. Moreover, the proposed sensor shows a wide range of refractive index sensing capability from 1.30 to 1.41. Due to multi-analyte detection capability, large sensing range, and excellent sensitivity the proposed sensor unfolds unrivalled capacity of detecting chemicals, carcinogenic agents, biomolecules, and other analytes.

Numerical analysis and early detection ofPlasmodium falciparum using a high performanceplasmonic biosensor with an external sensingapproach.

The authors propose a surface plasmon resonance (SPR) sensor based on photonic crystal fibers (PCFs) using three hexagonal ring lattices. The sensor can detect biomolecules with maximum wavelength and amplitude sensitivities of 23,000nm/RIU and 1310.93R I U -1, respectively, in the RI range of 1.32 to 1.42. It can detect infected red blood cells with Plasmodium falciparum for RIs of 1.402, 1.373, 1.395, and 1.383 in various malaria-infected red blood cell stages, including ring phase, trophozoite phase, and schizont phase. Furthermore, the sensor will be able to detect biomolecules such as viruses, proteins, DNA/RNA strands, acetone, ethanol, hexane, isopropanol, hexanol, formic acid, allyl cyanide, and others in its range. With these impressive results and identification capacity, the proposed sensor would benefit the biomaterial field and be appropriate for the early identification of malaria disease.

High-sensitivity dual U-shaped PCF-SPR refractive index sensor for the detection of gas and liquid analytes.

A dual U-shaped photonic crystal fiber (PCF) biochemical sensor based on surface plasmon resonance (SPR) is designed for the simultaneous detection of gas and liquid analytes, and the properties are analyzed by the full vector finite element method (FEM). SPR is excited by placing gold nanowires on the inner surface of the U-shaped device. In this technique, the traditional metal deposition process can be replaced, subsequently reducing the difficulty and complexity of actual production and improving the phase matching between the basic mode and plasmonic modes. To improve the detection properties, the structural parameters of the sensor including the air hole diameter, spacing, gold nanowire diameter, and polishing depth are optimized, and to better evaluate and analyze the sensing properties, the wavelength and amplitude modulation inquiry method is adopted. The results show that the maximum wavelength sensitivity (WS), amplitude sensitivity (AS), minimum resolution (R), and optimal FOM are 35,000nm/RIU, 438.08R I U -1, 2.86×10-6 R I U, and 165.16R I U -1, respectively. In addition, the sensor can detect analyte RIs between 1.00 and 1.36 for gas and liquid analytes simultaneously. Owing to the simple structure, low cost, and ambient-condition monitoring, the sensor has large potential in a myriad of applications including sewage treatment, food safety, humoral regulation, environmental and biological monitoring, and medical diagnosis.

High FOM PCF-SPR refractive index sensor based on MgF2-Au double-layer films.

A simple twin-core D-shape photonic crystal fiber sensor based on surface plasmon resonance (SPR) is designed for the measurement of refractive indices (RI). The twin-core D-shape structure enhances the SPR effect, and the M g F 2-Au dual-layer film narrows the linewidth in the loss spectrum, consequently improving both the sensitivity and figure of merit (FOM). The properties of the sensor are analyzed by the finite element method. In the RI range of 1.32-1.42, the maximum wavelength sensitivity, FOM, and resolution are 62,000nm/RIU, 1281R I U -1, and 1.61×10-6, respectively.

Numerical Study of Early Detection of Tuberculosis Infected with High Sensitivity Plasmonic Sensor

In this work, a photonic crystal fiber based on a plasmonic sensor for the early detection of tuberculosis has been designed with finite element analysis. The component is constructed with a substrate layer made of fused silica material, which is then coated with a thin film of TiO2 layer as an adhesive layer to strongly attach the Au layer with the silica fiber surface. The TiO2 layer has an optimal thickness of 45 nm, while the Au layer has a thickness of 50 nm. The sensor design has a refractive index (RI) detection range from 1.27 RIU to 1.37 RIU, it also shows a maximum wavelength sensitivity (WS), maximum amplitude sensitivity (AS), sensor resolution (SR), and sensor accuracy (SA) of 20,000 nm/RIU (x-polarized) and 17.000 nm/RIU( y-polarized), -211.38 1/RIU (x-polarized) and -211.211 1/RIU (y-polarized), 9.17 x 10−5 RIU (x-polarized) and 1 x 10−4 RIU (y-polarized), and 0.025/nm respectively. Tuberculosis exhibits a normal and infected RI range of 1.343 RIU to 1.351 RIU. Therefore, the proposed sensor design is capable of detecting four types of TB infections with high sensitivity.

Ultra-high sensitivity surface plasmon U-channel photonic crystal fiber for hemoglobin sensing

In order to increase the wavelength response range of the U-channel sensor, a numerical study has been conducted and then the sensing structure has been optimized. A sensor in photonic crystal fiber (PCF) is proposed in which a layer of titanium dioxide is coated on the surface of the U-channel and then coated with a gold film. These two different metal films are mainly used to control the Surface plasmon resonance (SPR) peak and the corresponding resonance wavelength, thus changing the sensor performance. Just below the metal layer are two special air holes on either side. They form a leakage window in the center. In the following sections, the effects of these variables on the sensor will be studied in detail by COMSOL. The modal transmission characteristics of this fiber optic sensor are analyzed in this paper. By analyzing the obtained loss spectrum, the energy variation in the surface plasmon polariton (SPP) mode and the influence of the core mode on the sensing performance of the fiber optic sensor presented, the general rule of the optimized PCF-SPR sensor is deduced. In addition, we can make subtle adjustments to the sensor to improve its sensitivity. We found with the refractive index (RI) ranging from 1.26 to 1.42, the maximum wavelength sensitivity is 7500 nm/RIU, which corresponds to a full width at half maximum (FWHM) of 11.83 nm，a figure of merit (FOM) of 634.1 RIU−1. In addition, we also have discussed the sensor and different concentrations of hemoglobin aqueous solution to detect its RI. It is evident from the results that the sensor demonstrates excellent sensitivity and a wide detection range, which is highly desirable for practical diagnostic purposes. The potential of this sensor for clinical trials and its application to medical diagnostics is promising. Compared with complex traditional methods, the PCF has obvious advantages such as clear structure, simple manufacture, high sensitivity and strong environmental adaptability. Moreover, it has the advantage of wide wavelength response range and has a clear development prospect in the field of biochemical sensing. It has foreseeable potential practical value.