Mating Conditions Research Articles

Mating Assay: Plating Below a Cell Density Threshold is Required for Unbiased Estimation of Plasmid Conjugation Frequency of RP4 Transfer Between E. coli Strains

Mating assays are common laboratory experiments for measuring the conjugation frequency, i.e. efficiency at which a plasmid transfers from a population of donor cells to a population of recipient cells. Selective plating remains a widely used quantification method to enumerate transconjugants at the end of such assays. However, conjugation frequencies may be inaccurately estimated because plasmid transfer can occur on transconjugant-selective plates rather than only during the intended mating duration. We investigated the influence of cell density on this phenomenon. We conducted mating experiments with IncPα plasmid RP4 harbored in Escherichia coli at a fixed cell density and mating conditions, inoculated a serial dilution of the mating mixture on transconjugant-selective plates or in transconjugant-selective broth, and compared the results to a model of cell-to-cell distance distribution. Our findings suggest that irrespective of the mating mode (liquid vs solid), the enumeration of transconjugants becomes significantly biased if the plated cell density exceeds 28 Colony Forming Unit (CFU)/mm2 (or 1.68•105 CFU/standard 9 cm Petri dish). This threshold is determined with a 95% confidence interval of ± 4 CFU/mm2 (± 2.46•104 CFU/standard 9 cm Petri dish). Liquid mating assays were more sensitive to this bias because the conjugation frequency of RP4 is several orders of magnitude lower in suspension compared to surface mating. Therefore, if selective plating is used, we recommend to plate at this density threshold and that negative controls are performed where donors and recipients are briefly mixed before plating at the same dilutions as for the actual mating assay. As an alternative, a liquid enumeration method can be utilized to increase the signal-to-noise ratio and allow for more accurate enumeration of transconjugants.

USING SOLIDWORKS FOR PROTOTYPING AERODYNAMIC STEERING DRIVES

The work discusses the effective use of the Solidworks software for modeling complex mechanisms with moving elements of intricate shapes. The application of the program by designers in enterprises significantly increases the efficiency of the work of design bureaus and research and experimental departments. Development time is greatly reduced, and many analysis tools allow for the avoidance of errors. The use of Solidworks for creating 3D models, along with additive technologies for manufacturing these models, takes the creation of prototypes of complex steering drives to a qualitatively different level. To model such complex-shaped parts as ailerons, the Solidworks tool, “Section hood” was used, such a tool greatly simplifies modeling and allows you to achieve the desired shape of the model. The engine models were used in the Solidworks assembly and combined with the mating conditions with other components, this allowed to adjust the design “in the context of the assembly” to the actual dimensions of the engines. To analyze the correct movements of the drive elements, “mechanical couplings” with real gear ratios were installed on all gears. In this way, it was possible to fully analyze the movement of all drive elements, to determine their position during movement After the modeling and analysis process was completed, the prototype manufacturing process began, for which the FDM printing technology was chosen as the fastest, cheapest, but capable of reproducing complex shape details. CoPET plastic is chosen as the main material for printing, bearings are used for smooth rotation of drive elements, all axes of mechanisms are made of metal with the help of mechanical processing.The manufactured prototype turned out to be working, all movements are performed as intended in the modeling process, you can perform experiments and research with the obtained product to obtain the necessary results. The Solidworks software product allowed not only to fully simulate the steering drive, but also to avoid many errors thanks to the available analysis tools. The FDM printing technology made it possible to quickly create a prototype, provide all the intended functionality, the quality of the parts allows the drive to work correctly.

Effect of mating material on wear behaviour of Ni-based hardface coating

The selection of tribopairs, including mating materials, plays a crucial role in controlling material loss under rubbing conditions. In a fast breeder nuclear reactor, almost all moving components have been provided with a hardfaced coating at the mating surfaces for their longer life. Though, in most cases, the hardfaced surfaces come into contact with the components having the same coating; in some instances, they are allowed to rub against other materials. In the present investigations, an effort was made to study the wear behaviour of a Ni-based hardfaced coating made on 316LN stainless steel under similar and dissimilar mating conditions. Prior to wear tests, a defect-free hardface coating of Ni-based hardfacing alloy was made on 316LN stainless steel using plasma transferred arc welding process and subsequently characterized for its microstructure and hardness. Wear tests under dry sliding conditions were carried out at ambient temperature. The specific wear rate for dissimilar mating conditions was found to be one order of magnitude higher than the same rate obtained from similar mating conditions. Moreover, adhesive wear was the dominant wear mechanism in both mating conditions. It is clear from the study that similar material combinations should be given preference in the design of tribopairs instead of dissimilar material combinations to avoid significantly higher material losses for materials with lower hardness. The reported results will provide insight for carefully designing the tribopairs for critical applications.

Delicate dining with a date and burger binging with buddies: impression management across social settings and consumers' preferences for masculine or feminine foods.

Consumers often use their food choices as an impression management strategy to signal desirable aspects about themselves to others, especially in public places like restaurants and cafeterias, where the presence of others can promote certain consumption choices and preference patterns. In mating contexts, people prefer gender-typical traits and characteristics in a potential partner. Food options can also be classified according to their gender typicality, with certain alternatives perceived as feminine (e.g., salad, seafood) and with other options perceived as more masculine (e.g., steak, burger). Drawing on impression management theories from the drinking and dining domain and literature on sex differences in human mate preferences, we present a high-powered experiment investigating whether consumers' preferences for masculine or feminine foods depend on the social setting in which the food consumption takes place: dining with an attractive date (mating) or meeting and eating with friends (non-mating). Participants (N = 162, 46.9% females, 53.1% males; age M = 41.8 years, SD = 14.5) were randomly assigned to one of the two experimental conditions (mating vs. non-mating) and were asked to indicate their food preferences for 15 dishes that differed markedly in perceived femininity/masculinity. Consistent with our theorizing, females (males) generally had a stronger preference for foods perceived as more feminine (masculine), thereby supporting the gender-typicality thesis at the aggregate level. Furthermore, females in the mating condition-but not females in the non-mating condition-reported significantly stronger preferences for more feminine food alternatives. However, in direct contrast to our theorizing, males preferred more masculine meals in the non-mating condition (i.e., when dining with friends), whereas this gender-typical tendency did not emerge in the mating condition (i.e., when dining with an attractive date). We discuss the theoretical and practical implications of these findings and present a set of fruitful avenues for future research.

The Cuticular Hydrocarbons of Dasineura Oleae Show Differences Between Sex, Adult Age and Mating Status

In insects, cuticular lipids prevent water loss and act as semiochemicals. Because of their ecological function, the profile change across the insects’ sex and development offers insight into insect biology and possible tools for pest management. Here, the first work on cecidomyiid cuticular extracts is proposed considering Dasineura oleae (Diptera: Cecidomyiidae) males and females at different adult ages (0–12 h, 12–24 h, 24–36 h) and distinct sexual conditions (virgin and mated). A set of 49 compounds were recorded (12 alkanes, 1 monomethyl alkane, 11 fatty acids, 4 esters, 1 aldehyde, 1 allylbenzene, 1 amine, 1 flavonoid, 1 ketone, 1 phenol, 1 steradiene, 1 sterol, 1 terpene, 1 triterpene and 11 unknown compounds), and 18 of them showed significant differences between groups. Among alkanes, hexacosane (nC26) exhibited a decreasing trend from the youngest to the oldest females, while pentacosane (nC25) and nonacosane (nC29) showed a decreasing trend from 0 to 12 h to 12–24 h virgin females. In addition, nonadecane (nC19) was significantly more abundant in the youngest males compared to older males and females. The alkanes nC25, nC26 and nC29 have been reported to be age-related also in other dipterans, while nC19 has been described as gender-specific chemical cue for platygastrid parasitoids. Further behavioural trials and analyses are required to assign the specific ecological roles to the characterized compounds. Our results may contribute to develop new low-impact control strategies relying on the manipulation of D. oleae’s chemical communication (e.g. disruption of mating or species recognition).Highlights• Cuticular hydrocarbons are often involved in dipteran intraspecific communication.• We explored the cuticular profile of D. oleae at different age, sex, mating condition.• Five alkanes and one mono-methyl alkane showed differences among groups.• Linoleic acid is the most abundant compound in virgins, absent in mated insects.• Eleven compounds disappear in mated insects, but were present in all virgins.Graphical

Behavioural and Electrophysiological Response of Anastrepha fraterculus (Diptera: Tephritidae) to a γ-Lactone Synthetic Semiochemical.

Attractants are a powerful tool for pest management. The lack of specific attractants for the South American fruit fly, Anastrepha fraterculus, a complex of cryptic species of great economic importance in South America, makes it difficult to monitor the pest in the field. The γ-lactone male sex and aggregation pheromones of several Anastrepha species, naturally released in a 7:3 epianastrephin to anastrephin ratio, and a structurally related naturally occurring γ-lactone ((±)-trans-tetrahydroactinidiolide) with gem-dimethyl groups (dimethyl) at C(4), were evaluated as potential attractants of this species. Different age and mating conditions of A. fraterculus males and females were evaluated during electroantennography (EAG) and field cage experiments in which polymeric lures were deployed to contain 100 mg of attractant. Epianastrephin and dimethyl were EAG+ for all fly conditions, with epianastrephin eliciting the highest response for both sexes and immature flies showing greater responsiveness than mature flies. In the field cage experiments, immature flies were only attracted to leks; virgin females were attracted to leks, dimethyl, and both epianastrephin-anastrephin formulations (95 and 70 wt.% epianastrephin); mature-mated males were attracted to leks, dimethyl and 70 wt.% epianastrephin; and mature-mated females were only attracted to leks. Our bioassays showed a promising performance of the analog dimethyl since it elicited the same response as epianastrephin, requires fewer steps to synthesize, and contains one less chiral center than the natural pheromones. The attraction to leks was recorded for all mating conditions and ages of flies and suggests that air-borne volatiles of calling males contain cues that could act as sensory traps. The addition of any of these compounds in the synthetic attractants may result in a greater attraction and thus deserves further evaluation. Dose-response experiments will provide additional information to move a step forward and validate the results obtained in open-field conditions.

MAPkinases regulate secondary metabolism, sexual development and light dependent cellulase regulation in Trichoderma reesei

The filamentous fungus Trichoderma reesei is a prolific producer of plant cell wall degrading enzymes, which are regulated in response to diverse environmental signals for optimal adaptation, but also produces a wide array of secondary metabolites. Available carbon source and light are the strongest cues currently known to impact secreted enzyme levels and an interplay with regulation of secondary metabolism became increasingly obvious in recent years. While cellulase regulation is already known to be modulated by different mitogen activated protein kinase (MAPK) pathways, the relevance of the light signal, which is transmitted by this pathway in other fungi as well, is still unknown in T. reesei as are interconnections to secondary metabolism and chemical communication under mating conditions. Here we show that MAPkinases differentially influence cellulase regulation in light and darkness and that the Hog1 homologue TMK3, but not TMK1 or TMK2 are required for the chemotropic response to glucose in T. reesei. Additionally, MAPkinases regulate production of specific secondary metabolites including trichodimerol and bisorbibutenolid, a bioactive compound with cytostatic effect on cancer cells and deterrent effect on larvae, under conditions facilitating mating, which reflects a defect in chemical communication. Strains lacking either of the MAPkinases become female sterile, indicating the conservation of the role of MAPkinases in sexual fertility also in T. reesei. In summary, our findings substantiate the previously detected interconnection of cellulase regulation with regulation of secondary metabolism as well as the involvement of MAPkinases in light dependent gene regulation of cellulase and secondary metabolite genes in fungi.

Multiple paternity in reproduction of European eel Anguilla anguilla (L. 1758) by artificial mixing of different sperm in equal volumes

Because of its complex life cycle and due to multiple stress factors, the European eel is suffering a dramatic decline and has been declared Critically Endangered by the IUCN. A possible way to address this problem could be relieve the pressure on natural stocks by implementing its mass production by artificial breeding protocols. A previous study based on direct observation and parentage assignment underlined the presence of an allegedly hierarchic structure among European eel males in semi-natural mating conditions, with a consequent bias in F1 proportion assigned to each one. The aim of the present study is to attest if a different fertilization protocol based on the artificial mixing of female eggs with different males’ milt in equal volume (1 F:4 M) could represent a solution to the disproportion observed in semi-natural conditions. For this purpose, six families of European eels were generated, and 10 species-specific microsatellite loci were used to infer offspring composition by paternity assignment on 280 samples. Due to the asynchronous ovarian development of female European eels, the percentage of fertilized eggs for each female showed a great variability, ranging from 4.70% to 94.50%. A proportion of 94.02% of genotyped offspring were assigned with high confidence to their true parents. As regard males’ fertilization pattern, no substantial differences from natural mating were observed: a single male accounted for most offspring, which was just mostly composed of full sibs. Concluding, the obtained results suggest that the admixture of an equal volume of different males’ milt seems to contribute to the single-locus genetic variability (observed heterozygosity higher than expected in 7 out 9 loci), but it is not sufficient to ensure all the males the same chance to transmit their gene pool, and new fertilization strategies must be developed.

Comparison of Load-Carrying Capacity, Wear, and Resource of Metal-Polymer Corrected Spur Gears with a Gear Made of Polyamides РА6 or PA6+30CF

Based on the developed calculation research method of metal-polymer gears the analysis of the influence of height and angular correction of engagement of spur gears on load-carrying capacity, linear teeth wear, and resources is carried out. Gears with a pinion made of carbon steel 0.45%C and a gear made of basic polyamide PA6 or carbon fibre composite PA6 + 30CF were investigated. Quantitative and qualitative patterns of influence of both types of correction, changes in the initial teeth profile due to wear, mating conditions on the load carrying capacity, teeth linear wear, and service life of investigated metal-polymer gears have been established. Profile correction causes a decrease in the contact pressure in the engagement by different amounts during the meshing cycle. They are most significantly reduced in the input area of two-pair engagement. It was found that when using PA6 + 30CF, the maximum contact pressures are about 1.29 times higher than with PA6 at all values of the shift coefficients, regardless of its type. The tooth linear wear has different values during the meshing cycle depending on the shift coefficients and parity of engagement. The resource first increases with increasing the shift coefficients, reaching their optimum, and then decreases again. Regularities of this influence for each type of correction of engagement are established. Metal-polymer gears with a gear made of PA6 + 30CF will have a significantly higher service life than with a gear made of PA6.

Conjugation across Bacillus cereus and kin: A review.

Horizontal gene transfer (HGT) is a major driving force in shaping bacterial communities. Key elements responsible for HGT are conjugation-like events and transmissible plasmids. Conjugative plasmids can promote their own transfer as well as that of co-resident plasmids. Bacillus cereus and relatives harbor a plethora of plasmids, including conjugative plasmids, which are at the heart of the group species differentiation and specification. Since the first report of a conjugation-like event between strains of B. cereus sensu lato (s.l.) 40 years ago, many have studied the potential of plasmid transfer across the group, especially for plasmids encoding major toxins. Over the years, more than 20 plasmids from B. cereus isolates have been reported as conjugative. However, with the increasing number of genomic data available, in silico analyses indicate that more plasmids from B. cereus s.l. genomes present self-transfer potential. B. cereus s.l. bacteria occupy diverse environmental niches, which were mimicked in laboratory conditions to study conjugation-related mechanisms. Laboratory mating conditions remain nonetheless simplistic compared to the complex interactions occurring in natural environments. Given the health, economic and ecological importance of strains of B. cereus s.l., it is of prime importance to consider the impact of conjugation within this bacterial group.

Paced Mating Behaviour Is Influenced by Duration of Female Post-Ejaculatory Interval

Laboratory paradigms that enable the female rat to control the frequency and temporal distribution of sexual stimulation are well-suited to gaining knowledge about female sexual function; however, the variety of procedures used influence the specific behaviors exhibited by female rats and bring uncertainty into the conclusions that can be drawn. In this study, we evaluated the effects of test parameters on the display of paced mating behavior in female rats to develop better preclinical models for exploring female sexual health. Sexually experienced, estradiol- and progesterone-primed female rats were tested under paced mating conditions to determine whether sexual behavior differed as a function of number of male partners (1 or 3; Experiment 1), the time span between receipt of an ejaculation and the next intromission (ie, the post-ejaculatory interval or PEI; Experiment 2), or the duration of ejaculations (Experiment 3). Contact-return latency, exit latency, and withdrawal duration after mounts, intromissions, and ejaculations. The shorter withdrawal latency after intromission and longer return latency after ejaculation observed in 30-minute paced mating tests is best attributed to the female's PEI. The duration of the PEI is a specific factor that affects the display of paced mating behavior. Understanding of neurobiological mechanisms and sensory factors influencing sexual behavior learned from these models can be applied to studies of human female sexual health. Sexual motivation is indicated by analogous behaviors and supported by evolutionarily conserved systems in women and rats, meaning that animal models can be used to identify neurobiological mechanisms subserving these behaviors. Nonetheless, data related specifically to physiological effects of different mating paradigms are needed in future research. Procedures that mimic naturalistic settings, and thus enable female sexual motivation to drive behavior, are apt for studies aimed at understanding mechanisms supporting female sexual function whereas artificially lengthening the interval between an ejaculation and subsequent intromission may provide a model to study female sexual dysfunction.

Horizontal Gene Transfer of an IncP1 Plasmid to Soil Bacterial Community Introduced by Escherichia coli through Manure Amendment in Soil Microcosms.

The quantification and identification of new plasmid-acquiring bacteria in representative mating conditions is critical to characterize the risk of horizontal gene transfer in the environment. This study aimed to quantify conjugation events resulting from manure application to soils and identify the transconjugants resulting from these events. Conjugation was quantified at multiple time points by plating and flow cytometry, and the transconjugants were recovered by fluorescence-activated cell sorting and identified by 16S rRNA sequencing. Overall, transconjugants were only observed within the first 4 days after manure application and at values close to the detection limits of this experimental system (1.00–2.49 log CFU/g of manured soil, ranging between 10–5 and 10–4 transconjugants-to-donor ratios). In the pool of recovered transconjugants, we found amplicon sequence variants (ASVs) of genera whose origin was traced to soils (Bacillus and Nocardioides) and manure (Comamonas and Rahnella). This work showed that gene transfer from fecal to soil bacteria occurred despite the less-than-optimal conditions faced by manure bacteria when transferred to soils, but these events were rare, mainly happened shortly after manure application, and the plasmid did not colonize the soil community. This study provides important information to determine the risks of AMR spread via manure application.

Measuring population-level plant gene flow with topological data analysis

Hybridization is an important factor influencing the evolution of many plant species. Measurement of interspecific gene flow and quantification of recombination provide insight into the processes that shape population genetic diversity. Recently, a new approach called topological data analysis (TDA) has begun to be implemented to track genomic recombination between species and populations. However, existing TDA methods tend to underestimate gene flow in cross-population models. Here, we present a novel graph-based approach to measuring gene flow, which occurs during ongoing speciation and hybridization in plants in various mating systems. We combine minimal spanning networks with topological filtering and then test the resulting parameter measurements on simulated primary divergence and secondary contact processes under different mating conditions. The resulting parameters, based on the first Betti number (total number of one-dimensional cycles), showed a high positive correlation with the number of migrants (Nm) in almost all cases of secondary contact. Considering the modularity of MSN networks, we have devised a parameter that works well in the event of primary divergence, where gene flow is at its highest level. This approach is suitable for various types of data, including SNPs, microsatellites, and binary restriction fragment data.

A Gland of Many Uses: a Diversity of Compounds in the Labial Glands of the Bumble Bee Bombus impatiens Suggests Multiple Signaling Functions.

Communication in social insect colonies depends on signals accurately reflecting the identity and physiological state of the individuals. Such information is coded by the products of multiple exocrine glands, and the resulting blends reflect the species, sex, caste, age, task, reproductive status, and health of an individual, and may also contain caste-specific pheromones regulating the behavior and physiology of other individuals. Here we examined the composition of labial gland secretions in females of the bumble bee Bombus impatiens, of different castes, social condition, age, mating status, and ovarian activation. We show that active queens, gynes, and workers each produce caste-specific compounds that may serve different communicative functions. The composition and amounts of wax esters, mostly octyl esters produced by active queens, differed significantly between castes, mating, and social conditions, suggesting a social signaling role. Farnesyl esters were predominant in gynes and peaked at optimal mating age (6-10days), suggesting their possible roles as sex pheromone components. Reproductive status of females and age across castes was reflected by the ratio between short- and long-chain hydrocarbons, suggesting that these compounds may serve as fertility signals. Our findings overall suggest that the labial gland composition in B. impatiens reflects different facets of female physiology. While further bioassays are required to determine the functions of these compounds, they are likely to have important roles in communication between individuals.

Size variation, allometry and mating success in Aotearoa|New Zealand kelp flies (Coelopidae)

The need to respond quickly to the presence of an ephemeral resource required for breeding is often a feature of scramble competition mating systems. Scramble competition mating systems can feature extreme levels of sexual conflict and coercive mating by males. As a result, sexual selection can act on various traits used by males to overcome female resistance behaviours. Selection on these traits may result in significant intra and intersexual size variation and sexual dimorphism. Additionally, traits that influence mating success in males often show positive static allometry. Kelp flies (Coelopidae) are a small family of Diptera which specialise on wrack (beach cast marine macroalgae), a highly ephemeral resource. The mating system of these flies involves high levels of sexual conflict, with females rejecting all male mating attempts. In this study we describe intra and intersexual size variation and static allometry of traits in two of Aotearoa|New Zealand’s species, Coelopella curvipes and Chaetocoelopa littoralis. In addition, we investigate the mating behaviour of C. littoralis under ecologically relevant mating conditions. We found high levels of variation in both species with significant evidence of sexual dimorphism across all traits measured in C. littoralis, and in mid tibia length in C. curvipes. Furthermore, mid tibia length in both species exhibits positive static allometry and is disproportionally larger in larger males, suggesting that this trait in particular may be under strong sexual selection. We found that larger male C. littoralis which attempt to mate are significantly more likely to mate successfully demonstrating a large-size advantage in this species similar to findings across the Coelopidae. However, we only found a non-significant trend towards a mating advantage for males with longer mid-tibiae. We discuss these findings with reference to the population dynamics and ecology of these species.

The Effectiveness of Mating Induction on Men's Financial Risk-Taking: Relationship Experience Matters.

Substantial evidence from experimental studies has shown that mating motivation increases men’s financial risk-taking behaviors. The present study proposed a new moderator, men’s past relationship experience, for this well-accepted link between mating motivation and financial risk-taking tendency. Heterosexual young men were randomly assigned to the mating condition and control condition, and they completed a set of financial risk-taking tasks and reported their past relationship experience. A significant main effect of mating motivation and a significant interaction effect between experimental conditions (mating group and control group) and relationship experience emerged, suggesting that mating motivation increased financial risk-taking tendency only among men who have never been committed in a romantic relationship, rather than those who have had such experience. This moderating effect was replicated in two experiments. The present study contributed to the understanding of individual differences in the relationship between mating motivation and male financial risk-taking. The present findings also have important implications for financial industry and gambling companies to better target clients and advertise their high-risk products.

Sperm Numbers as a Paternity Guard in a Wild Bird.

Sperm competition is thought to impose strong selection on males to produce competitive ejaculates to outcompete rival males under competitive mating conditions. Our understanding of how different sperm traits influence fertilization success, however, remains limited, especially in wild populations. Recent literature highlights the importance of incorporating multiple ejaculate traits and pre-copulatory sexually selected traits in analyses aimed at understanding how selection acts on sperm traits. However, variation in a male’s ability to gain fertilization success may also depend upon a range of social and ecological factors that determine the opportunity for mating events both within and outside of the social pair-bond. Here, we test for an effect of sperm quantity and sperm size on male reproductive success in the red-back fairy-wren (Malurus melanocephalus) while simultaneously accounting for pre-copulatory sexual selection and potential socio-ecological correlates of male mating success. We found that sperm number (i.e., cloacal protuberance volume), but not sperm morphology, was associated with reproductive success in male red-backed fairy-wrens. Most notably, males with large numbers of sperm available for copulation achieved greater within-pair paternity success. Our results suggest that males use large sperm numbers as a defensive strategy to guard within-pair paternity success in a system where there is a high risk of sperm competition and female control of copulation. Finally, our work highlights the importance of accounting for socio-ecological factors that may influence male mating opportunities when examining the role of sperm traits in determining male reproductive success.

Mating weight and condition score are both good predictors of lambing potential for young Merino and Border Leicester Merino ewes across different environments and years in Australia

Context Increasing mating weight or condition score increases the lambing potential of ewes (fetuses scanned per 100 ewes joined). Aim We hypothesised that in some years, condition score would contribute an additional effect to mating weight on lambing potential. Methods Border Leicester Merino and Merino ewes were mated naturally to Merino or Terminal rams between 2008 and 2013 at eight linked sites across Australia. Border Leicester Merino ewes were mated in their first year while Merino ewes were not mated until their second year. All ewes were mated for a second time as 2 year olds (Border Leicester Merinos) or 3 year olds (Merino). A total of 4270 Border Leicester Merino and 5788 Merino ewes were weighed and condition scored at mating and scanned for pregnancy. Key results Lambing potential increased by 3.1% per 1 kg increase in mating weight, compared to 1.3% for 1 and 2 year old Border Leicester Merinos respectively, and by 2.1% compared to 1.4% for 2 and 3 year old Merinos respectively (P < 0.05). Lambing potential increased by 27% compared to 13% per increase in condition score for 1 and 2 year old Border Leicester Merinos respectively, and by 29% compared to 25% for for 2 and 3 year old Merinos respectively (P < 0.05). All relationships were linear. When both mating weight and condition score were fitted together, mating condition score explained additional variation to weight in one instance of all the 160 possible breed (n = 2) × age (n = 2) × site (n = 8) × mating year (n = 5) combinations. Conclusions Mating weight and condition score increased the lambing potential of ewes linearly with differences due to ewe age, year and possibly ewe breed. Mating condition score rarely explained additional variation in lambing potential to weight in young Merino or Border Leicester Merino ewes. Implications If ewes are weighed at mating then condition scoring is of minimal extra benefit to predict lambing potential. Achieving the heaviest possible mating weights or highest condition score maximises the lambing potential of ewes in their first two mating years.

Seasonal variation in insect biodiversity in a transitioning sub-urban area

A survey was carried out on the species diversity of insects in the suburban transition area of ​​Patna. The study was conducted over a one-year period of 2021 (January to December). A total of 41 species of insects have been identified in a small area (10 acre), with Lepidopteran order (20) are dominance over the Hemiptera (5), Hymenoptera (5), coleoptera (4), Odonata (3), and Polydesmida, Mantodea, Diptera, and Orthoptera one species each. All of these species are found based on seasonal variation and vegetation as well as the presence of built-up areas. The highest number of insect species was in September, and the lowest were in May and December. Species of Syntomoides imaon and Mylabris flexuosa were captured during the mating conditions in the months of August and September (rainy season), respectively. These variation indicates the abundance of insect biodiversity and also provides evidence of the abundant food chain of ecosystems.

Effects of implant Suprelorin on cytological changes of vaginal epithelial cells in female dogs (4.7 mg deslorelin)

Diagnosis of the estrous cycle in female dogs is important in veterinary medicine. The estrous cycle is divided into the following stages: proestrus, estrus, diestrus, metestrus, and anestrus, which due to the action of hormones, replace one after another. This feature of the estrous cycle leads to some difficulties with reproduction. It is hard to obtain newborns because of prolonged anestrus. Vaginal cytology is a simple and available diagnostic method of the estrous cycle. It is based on the analysis of vaginal mucosa epithelial cells changes. This method is used to determine the time of mating and diagnose pathological conditions in the reproductive system of female dogs. There are various drugs in veterinary medicine for the correction of the estrous cycle in female dogs. We used implant Suprelorin® to estrus induction. There were described methods of estrus stimulation using a subcutaneous implant Suprelorin (4.7 mg, deslorelin) and changes in vaginal epithelial cells using the vaginal cytology method. The study was performed on twelve (n = 12) adult female dogs in the anestrus stage. Implants were injected subcutaneously in the groin area and removed at the beginning of the estrus.