Materials For Supercapacitors Research Articles

Enhanced Electrochemical Performance in Supercapacitors through KCu-Cy Based Metal-Organic Framework Electrodes.

In the realm of electronics and electric energy storage, the convergence of organic and metallic materials has yielded promising outcomes. In this study, we introduce a novel metal-organic polymer synthesized from Cyamelurate and copper (KCu-Cy) and explore its application as an electrode for a supercapacitor. This material was pressed onto a stainless-steel grid as a thin film and synthesized on nickel foam. Comprehensive characterization was carried out to confirm the synthesis, ensure phase purity, and investigate atomic interactions. Single Crystal X-ray Diffraction (SCXRD) and Powder X-ray Diffraction (PXRD) analyses verified the synthesis and phase purity, shedding light on atomic arrangements. Fourier Transform Infrared Spectroscopy (FTIR) analyses provided insights into characteristic peaks within the material. Thermal Gravimetric Analysis (TGA) gauged stability and durability. Electrochemical performance was assessed through cyclic voltammetry. Notably, the nickel-supported electrodes, devoid of binders, exhibited exceptional specific capacity, reaching 1210.89 F/g at a scan rate of 5 mV/s, in contrast to 363.73 F/g for the pressed thin film on the stainless-steel grid, which incorporated a conductive agent and binder. Cu-Cy displayed impressive cyclization resistance, with a capacity retention of 90 % even after 11000 cycles. These findings underline the promise of Cu-Cy as a high-performance electrode material for supercapacitors, particularly in binder-free configurations, and suggest its potential in advanced energy storage applications.

β-Ni(OH)2 nanoparticles@activated sugarcane bagasse carbon nanocomposites as an advanced hybrid electrode material for asymmetric supercapacitors

β-Ni(OH)2 nanoparticles (NPs)@activated sugarcane bagasse carbon (ASBC) nanocomposites (N@ASBC NCps) with different Ni loadings were synthesized using a hydrothermal process. The products were characterized using techniques such as X-ray diffraction (XRD), field emission scanning and transmission electron microscopy (FE-SEM and TEM), Raman spectroscopy, and Fourier transform infrared spectroscopy (FT-IR). Electrochemical performance of the products was studied. Interestingly, the maximum specific capacitance of 1213.32 F/g at 1 A/g could be achieved in a 3N@ASBC NCps positive electrode. Concurrently, the ASBC negative electrode revealed a high specific capacitance of 233.34 F/g at 1 A/g. Additionally, the fabricated asymmetric supercapacitor (ASC), ASC-ASBC//3N@ASBC NCps, had a specific capacitance (Csc) of 34.03 F/g at 1 A/g with a specific energy density (Ed) and specific power density (Pd) of 9.93 Wh/kg and 181.26 W/kg, respectively. Moreover, the device could maintain 69.47% of its capacity after a 5000-cycle test.

Optimized Fabrication of Supercapacitor Using MOF-Derived NiCo2O4 with Porous Carbon as Cathode: Electrochemical Characterization and Stability Analysis using Time Series Analysis Technique

Optimized Fabrication of Supercapacitor Using MOF-Derived NiCo₂O₄ with Porous Carbon as Cathode: Electrochemical Characterization and Stability Analysis using Time Series Analysis Technique

Non-preoxidation synthesis of MXene integrated flexible carbon film for supercapacitors

Although the flexible carbon film integrated with MXene has been proven to be a new generation of supercapacitor material with good energy storage prospects, the MXene oxidation and the lack of active sites during the preparation of the carbon film can lead to irreversible capacity loss. Herein, a flexible carbon film constructed by MXene-integrated N-doped cavity-interconnected porous carbon nanofibers was prepared by a non-pre-oxidation synthesis strategy combining electrospinning and metal–organic framework derivatization. This flexible carbon film overcomes the oxidation problem of MXene during the stabilization of polyacrylonitrile, and the derived porous structure of cavity interconnection exposes more active sites. Due to its unique structural characteristics and ideal chemical composition, this independent flexible carbon film exhibits significantly enhanced electrochemical performance as an electrode material for supercapacitors. It exhibits an energy density of 26.2 Wh kg−1 at a power density of 500 W kg−1, and a capacitance retention rate of 96.3 % after 10,000 charge–discharge cycles. This study provides a unique strategy for the preparation of high-performance flexible carbon films, and this technology can also be extended to other integrated CNF composites for the design of high-performance supercapacitor electrodes.

Biomass nanoarchitectonics with activated rice husk char for nanoporous carbon as electrode material: Enhancing supercapacitor electrochemical performance

Nanoporous carbon from activated rice husk char was prepared via KOH activation at different ratios of rice husk: KOH, for using as electrode material in supercapacitor. The electrode could exhibit high performance in 6 M KOH aqueous electrolytes, particularly in terms of specific capacitance and power density. The Brunauer-Emmett-Teller (BET) analysis showed a high specific surface area of 2833 m²/g with a mesoporous structure in a sample activated with a 1:3 ratio of rice husk to KOH. In this sample, a high specific capacitance of 195.36 F/g was obtained at a current density of 1 A/g with excellent cycle stability of 99.87 % after continuous charge/discharge test for 10,000 cycles at 10 A/g. Furthermore, the fabricated symmetric coin cell exhibits a power density of 526.88 W/kg and an energy density of 14.77 Wh/kg. The practical application of this cell is demonstrated by its ability to power a 3 V LED light bulb for over 900 s.

Synergistic electrochemical and optical properties of a UVC class quaternary nanocomposite incorporating graphene oxide and samarium chromium oxide perovskite

This research presents a comprehensive investigation into a novel quaternary nanocomposite comprising graphene oxide (GO), samarium chromium oxide perovskite (SmCrO3), silicon dioxide (SiO2), and tin dioxide (SnO2). The nanocomposite was synthesized using a modified Stöber method. In order to assess its potential applications in supercapacitors and UVC devices, an extensive analysis of its electrochemical and optical properties was conducted. The crystal structure and phase identification were analyzed using X-ray diffraction (XRD) and Rietveld refinement with X'pert HighScore Plus software, confirming the successful formation of the nanocomposite. Scanning electron microscopy (SEM) provided valuable insights into the structural morphology, while energy dispersive X-ray spectroscopy (EDS) confirmed the presence of constituent elements. Fourier transform infrared (FTIR) analysis and Raman Spectroscopy elucidated the functional groups and chemical bonds, confirming the successful synthesis of the nanocomposite. UV–Vis spectroscopy and photoluminescence (PL) spectroscopy revealed its strong UV radiation absorption and intensified fluorescence properties and confirming the band gap of SmCrO3 and GO/SmCrO3/SiO2/SnO2 quaternary nanocomposite as ∼5.4 eV and 4.84 eV respectively. The potential of nanocomposite potential as a supercapacitor material was evaluated through cyclic voltammetry (CV) measurements and electrochemical impedance spectroscopy (EIS) analyses. Remarkably, the specific capacitance of the nanocomposite reached 253.75 Fg−1 at a scan rate of 10 mVs−1, and electrochemical surface area of 507 cm2, highlighting its exceptional charge storage capability and promising prospects for high-performance energy storage devices. This comprehensive study addresses a significant knowledge gap, providing a profound understanding of the electrochemical and optical behavior of the quaternary nanocomposite. The observed exceptional results underscore its suitability for supercapacitor applications and expected favorable material for UVC device technologies.

Fabrication of porous Ni–Co LDH@rGO nanocomposites as efficient electrode materials for asymmetric supercapacitor

Fabrication of porous Ni–Co LDH@rGO nanocomposites as efficient electrode materials for asymmetric supercapacitor

Sputter Deposited Crystalline MoO2 Films as a High-Capacity and Stable Electrode Material for Supercapacitors: Mechanistic/Electrochemical Insights

In this work, we have optimized and fabricated pristine molybdenum dioxide (MoO2) electrodes over the Silicon (Si) substrate and examined the impact of various ion-loaded aqueous electrolytes on their electrochemical behavior. The sputtered electrodes exhibited a high crystalline structure and a very low resistivity. These highly conductive electrodes were tested in three different aqueous electrolytes (acidic, neutral, and alkaline) to establish a relation between the electrode and the nature of the electrolyte to achieve optimal electrochemical performance and cyclability. The electrochemical kinetics showed that the charge storage mechanism was unique for all the electrolytes. The capacitive current was dominant in the neutral electrolyte, whereas it was diffusive dominant in alkaline and 70% capacitive in the acidic electrolyte. Our findings indicated that the MoO2@Si electrode exhibited superior electrochemical activity in an acidic electrolyte. The electrode showed a voltage window of 0.6 V with an areal capacity of 24 mF/cm2 at 0.1 V/s scan rate. Moreover, the electrode also demonstrated excellent cyclability and capacitance retention (∼145%) till 5000 cycles. These results highlighted that the binder-free MoO2@Si electrode showed outstanding electrochemical activity and stability, which makes it suitable for sulfuric acid electrolyte-based energy storage systems.

Algae Derived Carbon from Hydrothermal Liquefaction as Sustainable Carbon Electrode Material for Supercapacitor

With the worldwide awareness of sustainability, biomass-derived carbon electrode materials for supercapacitors have attracted growing attention. In this research, for the first time, we explored the feasibility of making use of the carbon byproduct from hydrothermal liquefaction (HTL) of microalgae, termed herein as algae-derived carbon (ADC), to prepare sustainable carbon electrode materials for high-performance supercapacitor development. Specifically, we investigated carbon activation with a variety of activating reagents as well as N- and Fe-doping of the obtained ADC with the intention to enhance its electrochemical performance. We characterized the structure of the activated and doped ADCs using scanning electron microscope (SEM), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and BET surface area and pore analysis, and correlated the ADCs’ structure with their electrochemical performance as evaluated using cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), impedance, and cycle stability through an assembled symmetric two-electrode cell with 1 M H2SO4 as electrolyte. It was found that the ADC that is activated using KOH (KOH-ADC) showed the best electrochemical performance, and its specific capacitance was 14.1-fold larger with respect to that of the raw ADC and reached 234.5 F/g in the GCD test at a current density of 0.5 A/g. The KOH-ADC also demonstrated excellent capacitance retention (97% after 10,000 cycles at a high current density of 10 A/g) for stable long-term operations. This research pointed out a promising direction to develop sustainable electrode materials for supercapacitors from the carbon byproduct produced after HTL processing of algae.

Development of lignin hydrogel reinforced polypyrrole rich electrode material for supercapacitor and sensing applications

The preparation of natural polymer-based highly conductive hydrogels with reliable durability for applications in supercapacitors (SCs) is still challenging. Herein, a facile method to prepare alkaline lignin (AL)-based polypyrrole (PPy)-rich, high-conductive PPy@AL/PEGDGE gel was reported, where AL was used as a dopant, polyethylene glycol diglycidyl ether (PEGDGE) as a cross-linking agent, and PPy as a conducting polymer. The PPy@AL/PEGDGE gel electrode materials with hollow structures were prepared by electrochemical deposition and chemical etching method and then assembled into sandwich-shaped SCs. Cyclic voltammetry (CV), galvanotactic charge discharge (GCD), electrochemical impedance spectroscopy (EIS) and cycling stability tests of the PPy@AL/PEGDGE SCs were performed. The results demonstrated that the SCs can achieve a conductivity of 25.9 S·m−1 and a specific capacitance of 175 F·g−1, which was 127.4 % higher compared to pure PPy (77 F·g−1) electrode. The highest energy density and power density for the SCs were obtained at 23.06 Wh·kg−1 and 5376 W·kg−1, respectively. In addition, the cycling performance was also higher than that of pure PPy assembled SCs (50 %), and the capacitance retention rate can reach 72.3 % after 1000 cycles. The electrode materials are expected to be used as sensor and SCs devices.

Advances In Borophene: Synthesis, Tunable Properties, and Energy Storage Applications.

Monolayer boron nanosheet, commonly known as borophene, has garnered significant attention in recent years due to its unique structural, electronic, mechanical, and thermal properties. This review paper provides a comprehensive overview of the advancements in the synthetic strategies, tunable properties, and prospective applications of borophene, specifically focusing on its potential in energy storage devices. The review begins by discussing the various synthesis techniques for borophene, including molecular beam epitaxy (MBE), chemical vapor deposition (CVD), and chemical methods, such as ultrasonic exfoliation and thermal decomposition of boron-containing precursors. The tunable properties of borophene, including its electronic, mechanical, and thermal characteristics, are extensively reviewed, with discussions on its bandgap engineering, plasmonic behavior, and thermal conductivity. Moreover, the potential applications of borophene in energy storage devices, particularly as anode materials in metal-ion batteries and supercapacitors, along with its prospects in other energy storage systems, such as sodium-oxygen batteries, are succinctly, discussed. Hence, this review provides valuable insights into the synthesis, properties, and applications of borophene, offering much-desired guidance for further research and development in this promising area of nanomaterials science.

FeMn-LDH/Ni(OH)2 with unique flower-like heterostructure as electrode material for supercapacitor

FeMn-LDH/Ni(OH)2 with unique flower-like heterostructure as electrode material for supercapacitor

Synthesis and Characterization of Polypyrrole-Protected Y2O3 Binary Composite: A Promising Electrode Material for Supercapacitors

Synthesis and Characterization of Polypyrrole-Protected Y2O3 Binary Composite: A Promising Electrode Material for Supercapacitors

Non-Substituted Imidazolium-Based Electrolytes as Potential Alternatives to the Conventional Acidic Electrolytes of Polyaniline-Based Electrode Materials for Supercapacitors.

Although disubstituted imidazolium cation is sterically crowded, hundreds of ionic liquids based on this cation have been reported as electrolytes for energy storage devices. In contrast to disubstituted imidazolium, non-substituted imidazolium is uncrowded sterically and has not yet been investigated as an electrolyte, to the best of our knowledge. Hence, imidazolium hydrogen sulfate [Imi][HSO4], in mixture with water, was studied as an electrolyte for PANI-based electrode materials. For comparison, pyrrolidinium with hydrogen sulfate or p-toluene sulfonate ([Pyrr][HSO4] or [Pyrr][PTS]), in mixture with water, were also investigated as alternatives to the conventional electrolyte (i.e., aqueous H2SO4) for PANI electrodes. Walden plots of binary mixture ionic liquid-water weight ratios with the optimal ionic conductivity (i.e., [Imi][HSO4]/water 48/52 wt% (195.1 mS/cm), [Pyrr][HSO4]/water 41/59 wt% (186.6 mS/cm), and [Pyrr][PTS]/water 48/52 wt% (43.4 mS/cm) along with the electrochemical performances of PANI in these binary mixtures showed that [Pyrr][HSO4]aq or [Imi][HSO4]aq are convenient electrolytes for PANI/PIL, as opposed to [Pyrr][PTS]aq. Furthermore, replacing the conventional aqueous electrolyte H2SO4 with [Imi][HSO4] aq increased the specific capacitance of PANI/PIL from 249.8 to 268.5 F/g at 15 mV/s. Moreover, PANI/PIL electrodes displayed a quasi-ideal capacitive behavior in [Imi][HSO4]aq (the correction factor of CPE4 was 0.99). This primary study has shown that non-substituted imidazolium as an electrolyte could enhance the electrochemical performances of PANI electrodes and could be a good alternative to the conventional electrolyte.

Mechanism research progress on transition metal compound electrode materials for supercapacitors

Mechanism research progress on transition metal compound electrode materials for supercapacitors

Integrated Textile Supercapacitors Enhanced with Energy‐Absorbing Spacer Fabrics and Ti3C2Tx MXene

AbstractThe rapid development of wearable electronics requires energy storage devices capable of withstanding both static and dynamic deformations. The versatility of textile supercapacitors renders them promising candidates, but their low electrochemical performance especially under mechanical deformation, poses many limitations for practical use. In this study, MXene‐based textile supercapacitors are designed and fabricated using hierarchical spacer fabrics as the skeleton to provide robust mechanical support and stable performance. Ti3C2Tx MXene is adopted as the current collector and active material for the spacer fabric supercapacitor, resulting in an impressive areal capacitance of 415 mF cm−2 with a MXene loading of 4.2 mg cm−2. Remarkable stability and durability are achieved in the form of three‐dimensional (3D) textile supercapacitors, even under both static and dynamic deformations. The compressive behaviors of these supercapacitors can be easily adjusted (e.g., from 10 to 168 KPa at 50% compression) by altering the spacer fabric structure, demonstrating their energy‐absorption (damping of kinetic energy) capability and their potential to meet the requirements of various wearable applications.

Conducting Polymers–Metal Chalcogenides Hybrid Composite: Current Trends and Future Prospects Toward Supercapacitor Applications

Conducting polymers have grown in popularity as electrode materials in supercapacitors due to their polymeric mechanical structure and outstanding conductivity. Nanostructured conducting polymers, in particular, have been the focus due to unique properties such as higher surface area, shorter diffusion lengths for ion transport, and a high electrochemical nature. Nonetheless, the volumetric expansion of conducting polymer electrodes after long charge–discharge cycles reduces capacitance retention. Metal chalcogenides, on the other hand, are distinguished from other metallic compounds by their distinctive 2D structure, large theoretical capacities, abundant electrochemical active sites, and tunable shape, enabling them as a potential candidature when combined with conducting polymers to produce a composite material taking “material mutualism” to enhance the properties. Hence, the review focuses on recent advancement in the field of creating conducting polymers–metal chalcogenides composite for supercapacitors. It especially covers how nanoarchitecture, composition, and doping affect the electrochemical characteristics of these composites. A brief introduction of several synthesis procedures is also offered, which includes chemical approaches with and without templates or binder additives. Furthermore, noteworthy works on the fabrication of symmetric and asymmetric devices are highlighted.

Synergistic effect of co-sputtered tungsten-titanium nitride as electrode material for efficient hybrid supercapacitors

The dawn of bimetallic transition metal nitrides has attracted considerable interest as battery grade electrode material for potential energy storage applications. In addition, it is essential to investigate binder-free processes to improve the performance of the fabricated electrodes. In this study, binder-free tungsten‑titanium nitrides (W-TiN) are deposited through RF/DC magnetron co-sputtering onto the conducting nickel foam (NF). SEM, EDX and X-ray diffraction are exploited to investigate surface morphology, elemental composition, and structural properties of sputtered materials. The W-TiN electrodes are characterized through electrochemical investigation in half-cell configuration. The tested W-TiN electrode is further utilized with activated carbon (AC) electrode to develop hybrid supercapacitor device W-TiN//AC. The hybrid device revealed a maximum energy density (Es) of 88.8 Wh/kg and power density (Ps) 1700 W /kg. To further understand the mechanism of hybrid devices, the capacitive and diffusive contributions are computed using linear and quadradic models. This study provides a new direction to integrate co-sputtered binder-free electrode materials and devices for large scale production of advanced hybrid energy storage devices.

Heteroatom(S) (N, S, P) Co‐Doped Reduced Graphene Oxide‐Based Binder‐Free Novel Energy Storage Electrode Material for High Energy Density Supercapacitor

AbstractThis manuscript reports a one‐pot synthesis of ternary heteroatoms (N/S/P) co‐doped reduced graphene oxide as an electrode material by simultaneous reduction/doping of/into graphene oxide employing eco‐friendly natural molecule(s) (thiamine monophosphate (TM) and thiamine pyrophosphate (TP)) under mild heating (≤60 °C) and near‐neutral pH (≤8) conditions. It produces N, S, P co‐doped rGO‐TM and N, S, P co‐doped rGO‐TP nanohybrids displaying a well‐connected porous microstructure with significantly doped atomic(%) ‐N (10.0%), S (4.1%), P (0.1%) and N (6.7%), S (2.0%), and P (0.5%), respectively. The symmetric supercapacitor designed using N, S, P‐rGO‐TM‐10 in water‐in‐salt 17 m NaClO4 electrolyte exhibits stable cell voltage of 3.0 V, superb gravimetric energy density (areal energy density) of 47.9 Wh kg−1@522.8 W g−1 (0.2363 Wh cm−2@ 2.5 W cm−2); the excellent cyclic stability (88.8 %) and Coulombic efficiency (99.2%) even after 20 000 cycles. Their energy storage capability is corroborated by the illumination of 109 white LEDs upon lighting a single SSC for 50 s each, driving a motor to run a fan, and forming the tandem device by joining three such cells in series.

Modeling specific capacitance of carbon nanotube-based supercapacitor electrodes by machine learning algorithms

Carbon nanotubes (CNTs) have emerged as promising materials for supercapacitors (SCs) due to their unique properties and exceptional electrical conductivity. These cylindrical structures composed of carbon atoms offer several advantages for SC electrode applications. The electrochemical performance of CNT-based electrodes is strongly influenced by factors such as surface area, pore structure, and ID/IG ratio. However, the lack of a credible physical model capable of accurately predicting the performance of SCs based on these physicochemical properties of CNTs poses a challenge. In this study, we propose the utilization of a data-driven approach employing various models including a gradient boosting regression (GBR), Bayesian regression (BR), ridge regression (RR), and stochastic gradient descent (SGD) model to predict the performance of SCs with CNT electrodes based on the microstructural properties of the electrode material and electrochemical operational parameters. The developed GBR model demonstrates its feasibility by achieving a low root mean square error (RMSE) value of approximately 36.31 for the prediction of specific capacitance for test split. Additionally, a sensitivity analysis was conducted to investigate the influence of independent input parameters on a single output parameter, specifically the specific capacitance. This analysis provides insights into the relative importance and impact of various input parameters on the specific capacitance of CNT-based SCs.