Materials For Rechargeable Batteries Research Articles

High‐potential and Stable Bipolar Cathode for Rechargeable Batteries with Fast‐charging and Wide‐temperature Adaptability

Organic carbonyl compounds have been recognized as promising electrodes due to multiple active sites, abundant element resources and flexible structural designability, while their practical applications are still hindered by the easy solubility and low discharge potential. Herein, a novel bipolar polymer composite (TAC) was well‐designed by grafting p‐type triphenylamine units onto n‐type anthraquinone to form an extended π‐conjugated structure and in‐situ growing on carbon nanotubes, which was proved not only with higher discharge potential but also effectively suppress the dissolution issues. Moreover, TAC combined the advantages of different active sites and behaved a dual‐ion storage mechanism. Benefitting from the in‐situ polymerization process, TAC with tube‐type core‐shell structure exhibited enhanced electron transport and improved utilization of active sites, resulting in high capacity (193 mAh g‐1), outstanding rate performance (fast charging within 17 s), long‐term stability (a high capacity retention of 87% after 1000 cycles) and high mass loading (10 mg cm‐2). Additionally, TAC can well adapt to the temperature change, outputting a capacity of 72 mAh g‐1 at ‐60 °C and 165 mAh g‐1 at 80 °C. Such versatile polymer structure inspires the design of high performance organic materials for rechargeable batteries to satisfy high stability and wide temperature operations.

High-potential and Stable Bipolar Cathode for Rechargeable Batteries with Fast-charging and Wide-temperature Adaptability.

Organic carbonyl compounds have been recognized as promising electrodes due to multiple active sites, abundant element resources and flexible structural designability, while their practical applications are still hindered by the easy solubility and low discharge potential. Herein, a novel bipolar polymer composite (TAC) was well-designed by grafting p-type triphenylamine units onto n-type anthraquinone to form an extended π-conjugated structure and in-situ growing on carbon nanotubes, which was proved not only with higher discharge potential but also effectively suppress the dissolution issues. Moreover, TAC combined the advantages of different active sites and behaved a dual-ion storage mechanism. Benefitting from the in-situ polymerization process, TAC with tube-type core-shell structure exhibited enhanced electron transport and improved utilization of active sites, resulting in high capacity (193 mAh g-1), outstanding rate performance (fast charging within 17 s), long-term stability (a high capacity retention of 87% after 1000 cycles) and high mass loading (10 mg cm-2). Additionally, TAC can well adapt to the temperature change, outputting a capacity of 72 mAh g-1 at -60 °C and165 mAh g-1 at 80 °C. Such versatile polymer structure inspires the design of high performance organic materials for rechargeable batteries to satisfy high stability and wide temperature operations.

Machine learning-assisted DFT-prediction of pristine and endohedral doped (O and Se) Ge12C12 and Si12C12 nanostructures as anode materials for lithium-ion batteries

Nanostructured materials have gained significant attention as anode material in rechargeable lithium-ion batteries due to their large surface-to-volume ratio and efficient lithium-ion intercalation. Herein, we systematically investigated the electronic and electrochemical performance of pristine and endohedral doped (O and Se) Ge12C12 and Si12C12 nanocages as a prospective negative electrode for lithium-ion batteries using high-level density functional theory at the DFT/B3LYP-GD3(BJ)/6-311 + G(d, p)/GEN/LanL2DZ level of theory. Key findings from frontier molecular orbital (FMO) and density of states (DOS) revealed that endohedral doping of the studied nanocages with O and Se tremendously enhances their electrical conductivity. Furthermore, the pristine Si12C12 nanocage brilliantly exhibited the highest Vcell (1.49 V) and theoretical capacity (668.42 mAh g− 1) among the investigated nanocages and, hence, the most suitable negative electrode material for lithium-ion batteries. Moreover, we utilized four machine learning regression algorithms, namely, Linear, Lasso, Ridge, and ElasticNet regression, to predict the Vcell of the nanocages obtained from DFT simulation, achieving R2 scores close to 1 (R2 = 0.99) and lower RMSE values (RMSE < 0.05). Among the regression algorithms, Lasso regression demonstrated the best performance in predicting the Vcell of the nanocages, owing to its L1 regularization technique.

Organometallic Polymer Constructed by Active Fe-C12N8 Centers for Boosting Sodium-Ion Storage.

Organic-metal coordination materials with rich structural diversity are considered as promising electrode materials for rechargeable sodium-ion batteries. However, the electrochemical performance can be constrained by the limited number of active sites and structural instability under the discharge/charge process. Herein, organometallic polymer microspheres (Fe-PDA-220) with a unique d-π conjugated structure was designed and successfully constructed through a simple synchronous polymerization and coordination reactions. Polymerization of phenylenediamine was initiated by Fe3+ and Fe2+ ions generated synchronously during the polymerization integrated with poly-aminoquinone chains to form Fe-C12N8 active centers. Used as electrode materials for sodium-ion batteries, the distinctive Fe-C bond significantly boosts the structural stability, and the π-d conjugation system could facilitate electron transfer. A high reversible capacity of 345 mAh g-1 was delivered at 0.1 A g-1 and a capacity of 106 mAh g-1 was maintained even after discharged/charged at 1.0 A g-1 for 5000 cycles, outperforming most reported coordination materials. Spectroscopic and electronic analyses revealed that a two-electron reaction occurred per active unit, accompanied by the reversible redox evolution of the C=N groups and Fe ions during the sodiation/desodiation. This work provides a promising and efficient strategy for boosting the electrochemical performance of organic electrode materials by the design of organometallic polymers.

Electrolyte-Salts Regulated Hydrogen-Bonding Configuration and Interphase Formation Achieving Highly Stable Anode for Rechargeable Aqueous Sodium-Ion Batteries.

Hydrogen evolution reactions that cause the alkalization of aqueous electrolytes generally frustrate the structural stability and cycling performance of NaTi2(PO4)3/C anode material for rechargeable aqueous sodium-ion batteries (ASIBs). Herein, a novel highly concentrated electrolyte with a large hydrogen-evolution overpotential and hydroxide-capture ability is rationally established by incorporating a bifunctional Mg(Ac)2 additive into a concentrated NaAc aqueous solution. The highly concentrated electrolyte salts (4m NaAc+3m Mg(Ac)2) favor regulation on hydrogen-bonding configurations and kinetically shift the hydrogen evolution potential to a lower value of -1.37 V (vs Ag/AgCl). The Mg(Ac)2 additive plays particular roles in spontaneously capturing hydroxide ions generated during hydrogen evolution reactions on anode surfaces and simultaneously forming a protective Mg(OH)2-like interphase. As a result, the unique electrolyte significantly improves the structural stability and cycling performance of NaTi2(PO4)3/C anode (94.8% capacity retention after 100 cycles at 100 mA·g-1). The effect of salt concentration on hydrogen bonding configurations of aqueous electrolytes is investigated with Raman spectroscopy and FTIR spectroscopy. The interphase is identified by coupling EDS mapping, X-ray photoelectron spectroscopy, and X-ray diffraction. This work provides a new strategy for improving the cycling stability of aqueous sodium-ion batteries.

Conductive metal-organic frameworks with redox activity as electrode materials for rechargeable batteries

Conductive metal-organic frameworks with redox activity as electrode materials for rechargeable batteries

Lithiophilic Protective Dual Layer Enabling Stable Electrodeposition of Lithium at High Current Density

Lithium (Li) is an ideal anode material for rechargeable batteries and thus manufacturing Li metal is crucial for the practical development of Li metal batteries. Electrodeposition is an efficient technique for producing ultrathin and scalable Li metal electrodes. However, the dendritic growth and the side reactions of Li with electrolyte during the electrodeposition are the main obstacles to overcome. In this study, we designed a pre-coated protective dual layer (PDL) composed of a poly(ethylene oxide)-based solid polymer electrolyte (SPE) and a polydopamine-coated cellulose membrane (PD-CM). The adhesive and ion-conductive SPE layer suppressed the growth of Li dendrites and side reactions with liquid electrolyte. The PD-CM layer with high porosity and lithiophilicity promoted a facile and uniform Li-ion flux. By applying the pre-coated PDL, Li was uniformly electrodeposited on the Ag-coated Cu at a high current density of 6 mA cm−2. The Li/LiFePO4 cell composed of an electrodeposited Li anode with PDL and a LiFePO4 cathode was assembled without an additional separator, and its cycling performance was evaluated. The cell initially delivered a high discharge capacity of 154.8 mAh g−1 at 45 °C and exhibited excellent cycling stability with a capacity retention of 97.0% after 200 cycles.

Design and Functionalization of Lignocellulose‐Derived Silicon‐Carbon Composites for Rechargeable Batteries

AbstractSilicon/carbon (Si/C) composites present great potential as anode materials for rechargeable batteries since the materials integrate the high specific capacity and the preferable cycling stability from Si and C components, respectively. Functional Si/C composites based on lignocellulose have attracted wide attention due to the advantages from lignocellulose, including sustainability property, flexible structural tunability, and diverse physicochemical functionality. Although the flourishing development of rechargeable batteries boosts the studies on lignocellulose‐derived Si/C materials with high electrochemical performance, the publications that comprehensively clarify the design and functionalization of these high‐profile materials are still scarce. Accordingly, this review first systematically summarizes the recent advances in the structural design of lignocellulose‐derived Si/C composites after a brief clarification about the Si selection sources based on self and extraneous sources. Afterward, the functionalization strategies, including nanosizing, porosification, and magnesiothermic reduction of Si material as well as heteroatom modification of C material, are specifically highlighted. Besides, the applications of lignocellulose‐derived Si/C‐based materials in rechargeable batteries are elaborated. Finally, this review discusses the challenges and prospects of the application of lignocellulose‐derived Si/C composites for energy storage and provides a nuanced viewpoint regarding this topic.

Aspects of Spodumene Lithium Extraction Techniques

Lithium (Li), a leading cathode material in rechargeable Li-ion batteries, is vital to modern energy storage technology, establishing it as one of the most impactful and strategical elements. Given the surge in the electric car market, it is crucial to improve lithium recovery from its rich mineral deposits using the most effective extraction technique. In recent years, both industry and academia have shown significant interest in Li recovery from various Li-bearing minerals. Of these, only extraction from spodumene has established a reliable industrial production of Li salts. The current approaches for cracking of the naturally occurring, stable α-spodumene structure into a more open structure—β-spodumene—involve the so-called decrepitation process that takes place at extreme temperatures of ~1100 °C. This conversion is necessary, as β-spodumene is more susceptible to chemical attacks facilitating Li extraction. In the last several decades, many techniques have been demonstrated and patented to process hard-rock mineral spodumene. The objective of this review is to present a thorough analysis of significant findings and the enhancement of process flowsheets over time that can be useful for both research endeavors and industrial process improvements. The review focuses on the following techniques: acid methods, alkali methods, carbonate roasting/autoclaving methods, sulfuric acid roasting/autoclaving methods, chlorinating methods, and mechanochemical activation. Recently, microwaves (MWs), as an energy source, have been employed to transform α-spodumene into β-spodumene. Considering its energy-efficient and short-duration aspects, the review discusses the interaction mechanism of MWs with solids, MW-assisted decrepitation, and Li extraction efficiencies. Finally, the merits and/or disadvantages, challenges, and prospects of the processes are summarized.

Recent Advances in Development of Organic Battery Materials for Monovalent and Multivalent Metal-Ion Rechargeable Batteries

Recent Advances in Development of Organic Battery Materials for Monovalent and Multivalent Metal-Ion Rechargeable Batteries

Interlayer Space Engineering-Induced Pseudocapacitive Zinc-Ion Storage in Holey Graphene Oxide-Bearing Vertically Oriented MoS2 Nano-Wall Array Cathode for Aqueous Rechargeable Zn Metal Batteries.

Transition metal dichalcogenides, particularly MoS2, are acknowledged as a promising cathode material for aqueous rechargeable zinc metal batteries (ARZMBs). Nevertheless, its lack of hydrophilicity, poor electrical conductivity, significant restacking, and restricted interlayer spacing translate into inadequate capacity and rate performance. Herein, the unique porous structure and additional functional groups present in holey graphene oxide (hGO) are taken advantage of to dictate the vertical growth pattern of oxygen-doped MoS2 nanowalls (O-MoS2/NW) over the hGO surface. Compared to conventional graphene oxide (GO), the presence of nano-pores in hGO facilitates the homogeneous dispersion of Mo precursors and provides stronger interaction sites, promoting the uniform vertical alignment of O-MoS2/NW. The synergistic interaction between O-MoS2-NW and hGO translates to enhanced electron conductivity, efficient electrolyte penetration, enhanced interlayer spacing, reduced restacking, and enhanced surface area. As a consequence of precise control of various factors that decide the overall battery performance, a high discharge capacity (227mAhg-1 at 100mAg-1) cathode material with significantly lower charge transfer resistance (66Ω) compared to pristine O-MoS2 (153Ω) is developed. These findings underscore the potential of hGO as a multifunctional platform for nanoengineering high-performance cathode materials for the next generation of efficient and durable ARZMBs.

Polyanthraquinone with Facile Synthesis as a Cathode Material for Rechargeable Magnesium Batteries

Polyanthraquinone with Facile Synthesis as a Cathode Material for Rechargeable Magnesium Batteries

Functionalized MBene, Ti[formula omitted]BX[formula omitted] (X=Si, Ge, P, As) as potential excellent anode materials for lithium and sodium-ion batteries: A first-principles study

In the search for next-generation energy storage devices, superior-performance alternative electrode materials based on two-dimensional materials for rechargeable metal-ion batteries are essential. Here, we explored group III and IV functionalization of 2D Ti2B, Ti2BX2 (X=Si, Ge, P, As) as anode materials for Li and Na ion batteries using first-principles calculations. The structures had excellent metallic properties and demonstrated energetically favorable adsorptions for metal ions. Analyzing charge transfer and electronic band structures, silicon and phosphorous-functionalized Ti2B (Ti2BSi2 and Ti2BP2) showed the most potential. The energy band diagrams showed that both Ti2BSi2 and Ti2BP2 had metallic characteristics after Li and Na-ion adsorption, which offered considerable advantage for rechargeable-ion batteries. The structures exhibited low energy barriers for Li and Na-ion migration. The minimum energy barriers calculated for Na were 0.08 eV for Ti2BSi2 and 0.24 eV for Ti2BP2. Theoretical specific capacity and open circuit voltage were calculated using maximum layer adsorption. For both Li and Na, high values of specific capacity and low values of open circuit voltage (¡ 1 V) were found. Ti2BSi2 had the best performance, with a theoretical specific capacity of 1647.10 and 1317.68 mA h/g for Li and Na, respectively. Its open circuit voltages for Li and Na were 0.65 and 0.38 V. The insights of this study will be beneficial in fabricating high-performing Ti2BX2-based anodes for rechargeable Li and Na ion batteries.

Accelerated Lanthanide Intercalation into Graphite Catalyzed by Na.

Lanthanides (Ln) are notoriously difficult to intercalate into graphite. We investigated the possibility of using Na to catalyze the formation of Ln-intercalated graphite and successfully synthesized LnC6 (Ln = Sm, Eu, and Yb) significantly rapidly in high yields. The synthesis process involves the formation of the reaction intermediate NaCx, through the mixing of Na and C, which subsequently reacts with Ln upon heating to form LnC6. Well-sintered LnC6 pellets with low residual Na concentrations (Ln:Na ≈ 98:2) were fabricated by the two-step method. The pellets enabled the evaluation of LnC6 by powder X-ray diffraction and electrical resistivity measurements. This study highlights the versatility of the Na-catalyzed method and lays the foundation for the rapid mass production of LnC6, with potential applications in superconducting and rechargeable battery materials.

"Water-in-Salt" Electrolyte Suppressed MnVOPO4·2H2O Cathode Dissolution for Stable High-Voltage Platform and Cycling Performance for Aqueous Zinc Metal Battery.

Vanadium-based materials have the advantages of abundant valence states and stable structures, having great application potential as cathode materials in metal-ion batteries. However, their low voltage and vanadium dissolution in traditional water-based electrolytes greatly limit their application and development in aqueous zinc metal batteries (AZMBs). Herein, phosphate- and vanadium-based cathode materials (MnVOPO4·2H2O) with stacked layers and few defects were prepared via a condensation reflux method and then combined with a high-concentration electrolyte (21 m LiTFSI + 1 M Zn(CF3SO3)2) to address these limitations. The specific capacity and cycle stability accompanying the stable high voltage of 1.39 V were significantly enhanced compared with those for the traditional electrolyte of 3 M Zn(CF3SO3)2, benefiting from the suppressed vanadium dissolution. The cathode materials of MnVOPO4·2H2O achieved a high specific capacity of 152 mAh g-1 at 0.2 A g-1, with a retention rate of 86% after 100 cycles for AZMBs. A high energy density of 211.78 Wh kg-1 was also achieved. This strategy could illuminate the significance of electrolyte modification and provide potential high-voltage cathode materials for AZMBs and other rechargeable batteries.

Coupled Photochemical Storage Materials in Solar Rechargeable Batteries: Progress, Challenges, and Prospects

Coupled Photochemical Storage Materials in Solar Rechargeable Batteries: Progress, Challenges, and Prospects

High Surface Area Tungsten Oxide as a Positive Electrode Material for Aluminum Rechargeable Batteries

High Surface Area Tungsten Oxide as a Positive Electrode Material for Aluminum Rechargeable Batteries

Sulfurized Two-Dimensional Conductive Metal-Organic Framework as a High-Performance Cathode Material for Rechargeable Mg Batteries.

Rechargeable Mg batteries are a promising energy storage technology to overcome the limitations inherent to Li ion batteries. A critical challenge in advancing Mg batteries is the lack of suitable cathode materials. In this work, we report a cathode design that incorporates S functionality into two-dimensional metal-organic-frameworks (2D-MOFs). This new cathode material enables good Mg2+ storage capacity and outstanding cyclability. It was found that upon the initial Mg2+ insertion and disinsertion, there is an apparent structural transformation that crumbles the layered 2D framework, leading to amorphization. The resulting material serves as the active material to host Mg2+ through reduction and/or oxidation of S and, to a limited extent, O. The reversible nature of S and O redox chemistry was confirmed by spectroscopic characterizations and validated by density functional calculations. Importantly, during the Mg2+ insertion and disinsertion process, the 2D nature of the framework was maintained, which plays a key role in enabling the high reversibility of the MOF cathode.

Self-Healable, High-Stability Anode for Rechargeable Magnesium Batteries Realized by Graphene-Confined Gallium Metal.

In this work, a self-healable, high-stability anode material for rechargeable magnesium batteries (RMBs) has been developed by introducing a core-shell structure of Ga confined by reduced graphene oxide (Ga@rGO). Via this Ga@rGO anode, a specific capacity of 150 mAh g-1 at a current of 0.5 A g-1 stable up to 1200 cycles at room temperature and a specific capacity of 100 mAh g-1 under an ultrahigh current of 1 A g-1 stable up to 700 cycles at a slightly elevated temperature of 40 °C have been achieved. Additionally, the ultrahigh rate, high-cycling stability, and long-cycle life of the anode are attributed to the stabilized structure; such a low-cost, simple, and environmentally friendly direct drop coating (DDC) method is developed to maximize the original state of the active materials. Remarkably, the self-healing ability of anodes is still presented under the ultrahigh charging current. This anode is promising for the development of high rate and high stability RMBs.

2D Covalent Organic Framework Covalently Anchored with Carbon Nanotube as High-Performance Cathodes for Lithium and Sodium-Ion Batteries.

Covalent organic frameworks (COFs), featuring structural diversity, permanent porosity, and functional versatility, have emerged as promising electrode materials for rechargeable batteries. To date, amorphous polymer, COF, or their composites are mostly explored in lithium-ion batteries (LIBs), while their research in other alkali metal ion batteries is still in infancy. This can be due to the challenges that arise from large volume changes, slow diffusion kinetics, and inefficient active site utilization by the large Na+ or K+ ion. Herein, microwave-assisted imide-based 2D COF, TAPB-NDA covalently connected with amine-functionalized carbon nanotubes (TAPB-NDA@CNT) targeting the application in both Li-/Na-ion batteries, is synthesized. As-synthesized, TAPB-NDA@CNT50 displays the good performance as LIB cathode with a specific capacity of ≈138mAhg-1 at 25mAg-1, long cycling stability (81.2% retention after 2000 cycles at 300mAg-1), with excellent reversible capacity retention of ≈79.6%. Similarly, TAPB-NDA@CNT50, when employed in sodium-ion battery (SIB), exhibited 136.7mAhg-1 specific capacity at 25mAg-1, retained ≈80% of the reversible capacity after 1000 cycles at 300mAg-1 and showing excellent rate performance. The structural advantage of TAPB-NDA@CNT will encourage researchers to design COF-based cathodes for the alkali ion batteries.