Marginal Facies Research Articles

Retrogradation of carbonate platforms on a rifted margin: the late Ediacaran record of the northwestern Yangtze Craton (SW China)

The Late Ediacaran Dengying Formation, located in the Sichuan Basin of the northwestern Yangtze Craton, is of significant interest in oil and gas exploration due to its abundant pores and vugs within microbial mound-shoal complexes. However, there is still uncertainty regarding the spatiotemporal distribution and controlling factors of the platform margin. This study comprehensively analyzes the retrogradation pattern of the Dengying Formation platform margin using seismic data, well logs, field outcrops, and petrological characteristics. Our findings reveal that the Dengying Formation strata surrounding the rift basin at the northwestern of the Yangtze Craton can be divided into three main depositional facies: basin facies, slope facies, and platform margin facies. Additionally, based on the integration of lithological, log, and seismic characteristics, the Dengying Formation is subdivided into four third-order sequences, with five sequence boundaries and three seismic facies identified. Supported by sequence stratigraphy and geophysical data, we have reconstructed the tectono-sedimentary evolution of the multiple platform margins on the eastern side of the Deyang-Anyue rift in the Sichuan Basin during the late Ediacaran. Our findings indicate that the platform underwent two phases of retrogradation. The second-stage platform margin underwent retrogradation towards the interior, spanning a distance between 10 and 80 km, based on the initial configuration established by the first-stage platform margin. The main controls for progradation and retrogradation of carbonate platforms are eustatic sea-level changes and tectonic activity. Eustatic sea-level changes can be divided into constructive and destructive phases. Constructive phases are commonly observed in highstand systems tracts, while destructive phases are often associated with transgressive systems tracts and are related to platform retrogradation processes. However, sea-level changes alone cannot fully control the process of platform retrogradation. The thermal subsidence following mantle plume events likely played a significant role in the retrogradation of the platform in the study area. During this period, tectonic processes controlled the geometry of the platform and the deposition of carbonates in the platform margin-slope-basin environment. Additionally, karst-related mound-shoal complexes developed extensively along the platform margin of the Dengying Formation in the northwestern Yangtze Craton. The Lower Cambrian dark shales represent high-quality hydrocarbon source rocks, while the Dengying Formation exhibits an optimal source-reservoir configuration.

Three-pressure prediction method of jointing well-seismic data in JT1 well area of Sichuan Basin in China

With the high yield of many wells represented by Well JT1 in the Maokou Formation, has catalyzed a surge in exploration activities along the platform margin facies of the Maokou Formation in central Sichuan and further showed the significant exploration potential of the Maokou Formation in the northern slope. However, the fracture cave body of the Maokou Formation exhibits a high degree of development, strong longitudinal and horizontal heterogeneity, large formation pressure differences, and drilling events such as gas kicks and lost circulation occur frequently, which seriously affects the efficient implementation of drilling. Understanding the spatial distribution of the three-pressure in the formation can help better deal with and solve the above problems. Therefore, in order to help the safe, high-quality and rapid drilling of the Maokou Formation in the study area, and enhance the efficiency of oil and gas development, this paper explores the research on the prediction method of the three-pressure of jointing well-seismic data based on the geomechanical experimental data and the actual drilling data. In the process of prediction of pore pressure, this study found that the pore pressure and formation velocity in the study area have an exponential relationship. In order to enhance the applicability of the Filippone’s method in the study area and improve the prediction accuracy of pore pressure, the linear relationship between pore pressure and formation velocity in the Filippone’s method is modified to an exponential relationship, and a pore pressure prediction model suitable for the work area was established. Based on the Mohr–Coulomb criterion and Huang's model, the prediction models of collapse pressure and fracture pressure applicable to the study area were established, respectively. Then, the elastic parameters were obtained through pre-stack inversion, and the three-pressure bodies were calculated based on the elastic parameter bodies. The results indicate that: (1) The three-pressure prediction method of the jointing well-seismic data in this paper can predict the formation's longitudinal and transverse pressure anomaly zones in advance. (2) The Maokou Formation in the study area is characterized by abnormally high pressure, to balance the pressure of the high-ground formation, high-density drilling fluid is necessary. (3) The prediction results of three-pressure in this paper are highly consistent with the actual drilling engineering events, which verifies the reliability of the three-pressure prediction results presented in this study. The results of the study can provide a basis for decision-making in drilling geological design, such as the determination of drilling fluid density, the evaluation of borehole stability and other engineering problems that require support from three-pressure data.

Lower miocene stratigraphy of the Eastern Paratethys: Problems and state of the art

The Lower Miocene regional stages of the Eastern Paratethys, the Caucasian, Sakaraulian, and Kozakhurian, have been recognized in different structural facies zones of the basin and have no reliable universal stratigraphic basis for defining their boundaries and volume. Mollusks, benthic and planktonic foraminifers, calcareous nannoplankton, and dinocysts have been studied in a number of Lower Miocene sections in stratotype areas of the Central Ciscaucasia and Kartli Depression in Georgia. The fossil biota groups of the Caucasian, Sakaraulian, and Kozakhurian sediments are briefly characterized. The available new data on the phytoplankton of these regional stratigraphic units as well as the records of the benthos composition in the marginal facies of the Ciscaucasian Basin allow a comparison between the stratotype regions and show possibilities for a more detailed correlation among them.

Depositional environment and sequence stratigraphy of the Qom Formation (Miocene) from the Ghalibaf section, Central Iran

The Miocene strata of the Qom Formation from the Ghalibaf section, Central Iran (NW Semnan) documented a high diversity of shallow-marine microfacies. These deposits in the Ghalibaf section, with a total thickness of 445 m, are characterized by twenty-one microfacies. The carbonate microfacies are deposited into five facies belts, including a lagoon, upper slope, lower slope, platform-margin sand shoals and margin facies. The presence of barrier reefs, intraclasts, oncoids, and grainstone aggregates, along with the absence of vast tidal flat areas, are distinguished. According to the aforementioned evidences, these sediments were deposited on a rimmed carbonate platform. In addition, the heterolithic calciturbidite deposits also show that the carbonate sequences were sedimented on a rimmed carbonate platform. Based on the available data of sequence stratigraphy analysis, seven third-order depositional sequences are bounded by type-1 and type-2 sequence boundaries. The relative sea-level changes between the upper and lower sequence boundaries in accord with the global sea-level curves reveal a reasonable correlation. However, some differences in other sequence boundaries might be due to local tectonic activities in the Qom Formation sedimentary basin, thereby leading to local sea-level changes. Moreover, biostratigraphic data based on the larger foraminifera index markers, including Praebullalveolina curdica, Borelis melo, Dendritina rangi, Meandropsina iranica, Elphidium sp. 14, Neorotalia viennoti, and Miogypsina sp. suggests the Miocene Shallow Benthic Zones, SBZ24-SBZ25 equivalent to the late Aquitanian-Burdigalian timespan.

Marker Minerals in Volcanics and Xenoliths—An Approach to Categorize the Inferred Magmatic Rocks Underneath the Present-Day Volcanic Landscape of Tenerife, Spain (NW African Rare Mineral Province)

A mineralogical mapping (terrain analysis) based on micro-mounts has been performed in the Archipelago of the Canary Islands, Spain. The rare elements Be, F, Li, Nb, Ta, Zr, Hf, and rare earth elements (REE) were investigated on the largest island of the Canary Islands Archipelago, Tenerife, Spain. This study forms a contribution to the metallogenetic evolution of the offshore area of the NW African Rare Mineral Province. The finds made at Tenerife were correlated by means of minero-stratigraphy with the adjacent islands La Gomera, Gran Canaria and Fuerteventura, where typical critical element host rocks, e.g., carbonatites, are exposed. At Tenerife, these hidden rock types are only indicated by a wealth of 128 compositional first-order marker minerals hosting Be, F, Zr, Nb, Ta, Zr, Hf, Li, Cs, Sn, W, Ti and REE plus Y and another 106 structural second-order marker minerals describing the geodynamic and morpho-structural evolution of Tenerife (Mn, Fe, Pb, U, Th, As, Sb, V, S, B, Cu, Zn, Mo, Au). Based upon the quantitative micro-mineralogical mapping of lithoclasts and mineralogical xenoliths (foid-bearing monzodiorite/gabbro, (nepheline) syenite, phonolite trachyte) in volcanic and volcaniclastic rocks, hidden intrusive/subvolcanic bodies can be delineated that are associated with contact-metasomatic, zeolitic and argillic alteration zones, as well as potential ore zones. Two potential types of deposits are determined. These are pegmatite-syenites with minor carbonatites bound to a series of agpaitic intrusive rocks that are genetically interlocked with rift zones and associated with a hotspot along a passive continental margin. Towards the east, the carbonatite/alkali magmatite ratio reverses at Fuerteventura in favor of carbonatites, while at Gran Canaria and La Gomera, shallow hypogene/supergene mineral associations interpreted as a marginal facies to Tenerife occur and a new REE discovery in APS minerals has been made. There are seven mineralizing processes different from each other and representative of a peculiar metallogenic process (given in brackets): Protostage 1 (rifting), stages 2a to 2d (differentiation of syenite–pegmatite), stages 3 to 4b (contact-metasomatic/hydrothermal mineralization), stages 5a to 5b (hydrothermal remobilization and zeolitization), stage 6 (shallow hypogene-supergene transition and kaolinization), and stage 7 (auto-hydrothermal-topomineralic mineralization). The prerequisites to successfully take this holistic approach in economic geology are a low maturity of the landscapes in the target area, a Cenozoic age of endogenous and exogenous processes amenable to sedimentological, geomorphological, volcano-tectonic and quantitative mineralogical investigations. The volcanic island’s mineralogical mapping is not primarily designed as a proper pre-well-site study on the Isle of Tenerife, but considered a reference study area for minero-stratigraphic inter-island correlation (land–land) and land–sea when investigating the seabed and seamounts around volcanic archipelagos along the passive margin, as exemplified by the NW African Craton and its metallogenic province. This unconventional exploration technique should also be tested for hotspot- and rift-related volcanic islands elsewhere on the globe for mineral commodities different from the ones under study.

Lithium Prospectivity in the Northeast German and Thuringian Ba-sins

Over the years many boreholes have been drilled into the Northeast German Basin (NEGB) in pursuit of the exploration of hydrocarbons. As well as gaining important information regarding petrophysical and geophysical data, legacy boreholes also provide information regarding total dissolved solids in formation water, which sometimes includes lithium concentrations. With the rapid increase in demand for electric vehicles in combination with EU net-zero targets, lithium is a vital component of the future of the energy industry as it transitions away from fossil fuel dependence.
 So, where can we find lithium, how much of it is there, and where does it come from? After extracting lithium content data from formation water trace element data, we can answer two of these questions. The data gathered [1] is from boreholes drilled in the NEGB (in the states of Brandenburg, Mecklenburg-Vorpommern, and Sachsen-Anhalt) and the Thuringian Basin. The Northeast German Basin makes up the eastern part of the North German Basin, which, in turn, is part of the Southern Permian Basin. It is located between the Baltic Shield to the north and the Variscan belt to the south [2]. The basin contains up to 12km of Phanerozoic strata [2], the evolution of which began with Late Carboniferous/Early Permian (Stephanian/Autunian) volcanism [3, 4, 5, 6]. In the NEGB increased concentrations of lithium can be found within the Zechstein Staßfurt Carbonate (Ca2) and the Rotliegend. In Brandenburg the highest values of 230 mg/L can be found in the geothermal well doublet Groß Schönebeck which was drilled into sedimentary Rotliegend and Permo-Carboniferous volcanics. Comparable values (190 mg/L) can be found in formation water samples of the Ca2 in the well Lübben 103. In Mecklenburg-Vorpommern, lithium contents of 600 mg/L were encountered in the Rotliegend of the well Gristow 7, with lithium contents in the Ca2 of the nearby well Gristow 6h2 reaching 300 mg/L. The Reinkenhagen field (which targeted the hydrocarbons of the Ca2) has several wells which exhibit lithium contents in the Ca2 of up to 140 mg/L. In Sachsen-Anhalt elevated lithium values are limited to the Ca2. The Fallstein field, originally drilled for the exploration of hydrocarbons, encountered lithium contents of up to 189 mg/L. Spatial distribution of the lithium data can be seen in Figure 1 along with current geothermal projects. Also displayed are areas of proven and suspected geothermal potential.
 The Thuringian Basin is located between the Harz Mountains and the Thuringian Forest Mountains, the formation of which was part of the intramontane sudsidence zone of the Variscan mountains [7]. The trough shaped sedimentation area of the basin was formed in the early Mesozoic [8]. In Thuringia, as in Sachsen-Anhalt, elevated lithium values are limited to the Ca2. The fields of Kirchheilingen, Langensalza, and Mühlhausen all have multiple wells which show lithium contents of up to 200 mg/L.
 The source of lithium in formation water is not well understood and therefore cannot be clearly defined. A case study in Thurinigia focusing on Zechstein salts in Gorleben and Morlseben made the assumption that lithium content in the salt brines were leached from phyllosilicate bearing units (T4, A3, Ca3, T3) in the Zechstein [9]. Other sources discussed include relict metamorphic brines and organic compounds. A different study focusing on Rotliegend Ca-Cl brines in the
 North German Basin found that brines rich in lithium originated from the leaching of lithium rich mica in the Lower Rotliegend (volcanics) [10]. If lithium accumulation in formation waters is related to Permo/Carboniferous rocks, it is possible that deep faults may have acted as conduits for lithium rich brines to migrate into overlying formations [11]. This may be a plausible theory as this dataset shows that elevated lithium contents in the Ca2 can be found within the carbonate margin facies in areas through which major faults run. This is especially evident on the northern basin margin.
 Ultimately the data compiled from both basins will be used to perform a lithium in place analysis.

Petrogenesis and tectonic significance of the Early Cretaceous Xizhelimu diorite in Keyouzhongqi, Inner Mongolia, China

To determine the emplacement age, petrogenesis, and geodynamic setting of the Xizhelimu diorite in Keyouzhongqi, Inner Mongolia of northeastern China, a detailed study of the petrography, geochronology, and whole-rock geochemistry has been conducted. Geological and petrographic studies show that the Xizhelimu diorite is zoned: the central lithofacies zone is composed of medium-fine-grained monzodiorite and quartz diorite, and the marginal lithofacies zone is fine-grained diorite. The zircon U–Pb dating results show that the ages of the central and marginal facies are 133.5 ± 1.9 and 133.4 ± 1.4 Ma, respectively. The whole-rock rare earth and trace element characteristics of the Xizhelimu diorite show an O-type adakite affinity. Combining the analysis of zircon Hf isotope composition ( εHf(t) values of +7.7 to +10.0), the geochemical features of whole rock, and the results of partial melting modeling, we suggest that the parental magma of the Xizhelimu diorite was derived from the partial melting of altered oceanic crust mixing with subducting sediments at shallow depths. In the early stage of early Cretaceous, the Xizhelimu diorite originated in an extensional setting, mainly related to the closure of the western part of the Mongol–Okhotsk Ocean. The upwelling asthenospheric flow in this extensional setting induced partial melting of the paleo-oceanic crust to form the parental magma of the Xizhelimu diorite.

A new large tortoise from the early Oligocene (Arikareean NALMA) of Oaxaca, southern Mexico and its phylogenetic position within Pan-Testudinidae

ABSTRACT Pan-Testudinidae is the total clade of extant terrestrial tortoises, which includes extinct fossil members of their stem lineage. Members of this clade have a rather scarce fossil record in Mexico, and the few specimens known in scientific collections are poorly studied. Here, we described a new species of basal testudinid turtle, based on a single specimen from the early Oligocene deposits exposed in the marginal facies of the Chilapa Formation in Oaxaca, southern Mexico. The new taxon exhibits osteological characteristics that support its insertion as a basal Testudinidae. The phylogenetic relationships of the new turtle were assessed using a total evidence approach (morphological + molecular) in a global Pan-Testudinidae context using Implied Weighted Maximum Parsimony (IWMP), Standard Maximum Parsimony (SMP) and Bayesian Inference (BI). Although the BI consensus tree is not well resolved, the results obtained by IWMP and SMP retrieved its branching close to the root of Testudinidae. The differences between the topologies of the three phylogenetic analyses show that the position of several taxa within Testudinidae is affected by the phylogenetic analyses performed. The new taxon from Oaxaca, here reported, represents the first Palaeogene and the southernmost tortoise described from Mexico and the oldest Testudinidae known in the country.

Reconstruction of proto-type basin and tectono-paleogeography of Tarim block in early Paleozoic

Tarim Basin is a large, superimposed basin rich in petroleum resources, which has experienced many stages of complex tectonic-sedimentary evolution. As the basic geological study of the Tarim Basin, the proto-type basin and tectono-paleogeographic evolution are of great significance for understanding the distribution of petroleum reservoirs in the superimposed basin and provide tectonic background and theoretical guidance for petroleum exploration. According to the residual thickness map, as well as other lithofacies and seismic data, the scopes of the proto-type basin are determined by the marginal facies method and the thickness trend method, and the shortening amounts are calculated by the balanced cross-section method. Based on these data and previous works, four proto-type basin maps of Tarim Basin in present-day geographic coordinates and four tectono-paleogeographic maps of Tarim Basin in paleogeographic coordinates during the early Paleozoic are reconstructed, which directly show the changes of sedimentary and uplift-depression pattern caused by the transformation of the tectonic environment from extension to compression. In the Cambrian, the Tarim Basin was controlled by the extensional tectonic environment, with the sedimentary framework of “carbonate platform in the west, deep-water basin in the east”. At the end of the Ordovician, the Kudi Ocean and the North Altyn Ocean were closed, and the Central and South Kunlun terrane and the Altyn-Qilian terrane were collaged with the Tarim block, which directly led to the transformation of the uplift-depression pattern in the Tarim Basin from east-west differentiation to north-south differentiation, thus changing the sedimentary environment of the Tarim Basin in the late Ordovician to Silurian.

Ediacaran stratigraphy and paleogeography in the north Yangtze Block, South China

The Ediacaran gas exploration of the Sichuan Basin in the northwest Yangtze Block, South China, indicates that the paleogeography and lithofacies are of great significance for understanding sedimentary environments and further exploration. There are several contrarian views, however, regarding the Ediacaran paleogeographic configuration and lithofacies distribution in the north Yangtze Block. In this study, we systematically analyzed the Ediacaran stratigraphic, paleogeographic, and facies distributions by integrating outcrop observation, well correlation and seismic interpretation. The Ediacaran in the Micangshan-Hannan terrane is dominated by progressive onlap successions from west to east. We suggest that during the Ediacaran an overall paleogeographic configuration evolved from a shallow-water platform to deeper slope-basin and finally into an open ocean (i.e., the Proto-Tethys ocean) in the north Yangtze Block. The platform margin is roughly distributed along the north margin of the Micangshan-Hannan terrane and the present-day Chengkou fault. During the Doushantuo time, the paleogeographic configuration was characterized by a distally steepened ramp passing seaward into slope-basin facies. During the Dengying time, a rimmed carbonate platform developed on the Doushantuo Formation ramp. The platform margin facies predominantly contained microbially laminated dolomites and stromatolite reef complex. The slope-basin facies were dominated by thin-bedded and slump dolomites. The Ediacaran of the north Yangtze Block experienced a sedimentary evolution from a mixed carbonate-siliciclastic ramp of the Doushantuo Formation to a rimmed carbonate platform of the Dengying Formation, primarily controlled by tectonic subsidence differences and sea level changes.

Rare preservation of Triassic pedorelicts with biogenic traces from a hot semi-arid upland palaeoenvironment at Portishead, SW England

Pedorelicts occur sporadically in coastal exposures of Middle to Late Triassic continental sediments, at Portishead, SW England. The clasts include aeolian and bedrock constituents, calcrete textures, vesicles and other pedogenic features reflecting a hot semi-arid palaeoenvironment. Interpreted as being derived from an upland soil, they are classified in palaeosol terms as Calcic Protosol. In the most significant exposure, cryptic tubular trace fossils in branching networks occur within these pedorelict clasts in a localised fluvial deposit. This extremely rare palaeoecological archive offers a glimpse into continental upland life in a Pangaean desert landscape. It is documented for its own merit, to support continuing studies of its palaeobiology and to prompt investigation for comparable deposits.The pedorelicts occur within the Mercia Mudstone Marginal Facies (MMMF), close to its basal unconformity with underlying Paleozoic strata, at the margin of the Somerset Basin. The soil from which they are derived is interpreted to have developed in an upland regolith over Tournaisian bedrock of interbedded limestone and siltstone. These weathered and, with aeolian dust containing calcite and iron minerals and siliciclastic sand, formed a structured soil. This was aided by intermittent light and moderate rainfall that promoted mainly vadose pedogenic calcretization with displacive calcite crystallisation and siliciclastic grain breakage. In places, the soil was vesicular, as an ‘Av’ horizon, and in others, it was bioturbated with the development of calcite-lined tubules and unlined tunnels. At intervals of perhaps 104 to 105 years, catastrophic deluges eroded the regolith and transported clasts downslope towards the basin to form onlapping coarse clastic beds typical of the MMMF. The soil structure disintegrated but fragments that became pedorelicts were segregated in a fault-controlled palaeo-valley, possibly partly as a debris-flow, to be deposited as localised conglomeratic lenses with fluvial sand. After burial by further sedimentation, this deposit underwent diagenetic calcite cementation and baryte mineralisation before its present exposure by coastal erosion.

A microfossil assemblage from the Ediacaran Doushantuo Formation in the Shennongjia area (Hubei Province, South China): Filling critical paleoenvironmental and biostratigraphic gaps

Microfossils of the Ediacaran Doushantuo Formation in South China provide an important window onto the rapid diversification of marine eukaryotes after the terminal Cryogenian global glaciation. They also offer key data in the biostratigraphic subdivision and correlation of the lower–middle Ediacaran System. Previously published Doushantuo microfossils in South China were mostly from intra-shelf facies in the Yangtze Gorges area, shelf margin facies in the Weng’an area, and upper slope facies in the Zhangjiajie area, whereas paleontological data from shallow-water inner shelf facies have been rarely documented. In addition, previous data from South China leave a “barren zone” associated with the negative δ13Ccarb excursion EN2 that impedes biostratigraphic correlation. To address these environmental and stratigraphic gaps, we conducted an integrated chemostratigraphic and biostratigraphic analysis of the Doushantuo Formation at the inner shelf Lianhuacun section in the eastern Shennongjia area of Hubei Provence, South China. The Lianhuacun fossils are preserved in chert nodules/bands of the lower Doushantuo Formation, precisely in a chemostratigraphic interval identified as EN2, indicating that the so-called “barren zone” is likely a taphonomic artifact. A total of 33 genera and 82 species are identified, including a new genus (Duospinosphaera gen. nov.) and seven new species (Duospinosphaera shennongjiaensis sp. nov., D. biformis sp. nov., Jixiania retorta sp. nov., Mengeosphaera mamma sp. nov., Sinosphaera exilis sp. nov., Tanarium columnatum sp. nov., and Weissiella concentrica sp. nov.). The Lianhuacun acanthomorphic acritarchs can be broadly assigned to the third microfossil assemblage zone (i.e., the Tanarium conoideum – Cavaspina basiconica Assemblage Zone) recognized on the basis of the Weng’an biota that is correlated with upper Member II of Doushantuo Formation in the Yangtze Gorges area, consistent with chemostratigraphic correlation between the Shennongjia and Yangtze Gorges areas. Thus, the so-called “barren zone” may be a poorly preserved part of the third microfossil assemblage zone. Alternatively, it may represent a new and yet unnamed microfossil assemblage zone between the third and the overlying Tanarium pycnacanthum – Ceratosphaeridium glaberosum Assemblage Zone. Regardless, the new data presented here fill important gaps in the geographical, paleoenvironmental, and stratigraphic distributions of Ediacaran acanthomorphic acritarchs in South China. As such, they facilitate integrative chemostratigraphic and biostratigraphic correlation of Ediacaran strata at regional and global scales.

Effects of Regional Differences in Shale Floor Interval on the Petrophysical Properties and Shale Gas Prospects of the Overmature Niutitang Shale, Middle-Upper Yangtz Block

The lower Cambrian Niutitang/Qiongzhusi shale gas in the Middle-Upper Yangtz Block had been regarded as a very promising unconventional natural gas resource due to its high total organic carbon, great thickness, and large areal distribution. However, no commercial shale gas fields have yet been reported. From the northwest to the southeast there are considerable differences in the sedimentary environments, lithology, and erosive nature of the underlying interval (the floor interval) of the Niutitang shale. However, systematic research on whether and how these regional differences influence shale petrophysical properties and shale gas preservation in the Niutitang shale is lacking. A comparison of Niutitang shale reservoirs as influenced by different sedimentary and tectonic backgrounds is necessary. Samples were selected from both the overmature Niutitang shales and the floor interval. These samples cover the late Ediacaran and early Cambrian, with sedimentary environments varying from carbonate platform and carbonate platform marginal zone facies to continental shelf/slope. Previously published data on the lower Cambrian samples from Kaiyang (carbonate platform), Youyang (carbonate platform marginal zone) and Cen’gong (continental shelf/slope) sections were integrated and compared. The results indicate that the petrophysical properties of the floor interval can affect not only the preservation conditions (sealing capacity) of the shale gas, but also the petrophysical properties (pore volume, porosity, specific surface area and permeability) and methane content of the Niutitang shale. From the carbonate platform face to the continental shelf/slope the sealing capacity of the floor interval gradually improves because the latter gradually passes from high permeability dolostone (the Dengying Formation) to low permeability dense chert (the Liuchapo Formation). In addition, in contrast with several unconformities that occur in the carbonate platform face in the northern Guizhou depression, no unconformity contact occurs between the Niutitang shale and the floor interval on the continental shelf/slope developed in eastern Chongqing Province and northwestern Hunan Province. Such regional differences in floor interval could lead to significant differences in hydrocarbon expulsion behaviour and the development of organic pores within the Niutitang shale. Therefore, shale gas prospects in the Niutitang shales deposited on the continental shelf/slope should be significantly better than those of shales deposited on the carbonate platform face.

Geochemistry and new zircon U–Pb geochronology of Mesoproterozoic Punugodu granite pluton, SE India: implications for anorogenic magmatism along the western margin of Nellore Schist Belt, India

AbstractWe report a new zircon U–Pb age of 1257 ± 6 Ma for the Punugodu granite (PG) pluton in the Eastern Dharwar Craton (EDC), Southern India. The Mesoproterozoic PG is alkali feldspar hypersolvus granite emplaced at shallow crustal level, as evident from the presence of rhyodacite xenoliths and hornfelsic texture developed in the metavolcanic country rocks of the Neoarchaean Nellore Schist Belt (NSB). Geochemically, the PG is metaluminous, ferroan and alkali-calcic, and is characterized by high SiO2 and Na2O + K2O, Ga/Al ratios >2.6, high-field-strength elements and rare earth element (REE) contents with low CaO, MgO and Sr, indicating its similarity to anorogenic, alkali (A-type) granite. The highly fractionated REE patterns with negative europium anomalies of PG reflect its evolved nature and feldspar fractionation. Mafic (MME) to hybrid (HME) microgranular enclaves represent distinct batches of mantle-derived magmas that interacted, mingled and undercooled within the partly crystalline PG host magma. Felsic microgranular enclaves (FME) having similar mineralogical and geochemical characteristics to the host PG most likely represent fragments of marginal rock facies of the PG pluton. The PG appears to be formed from an oceanic island basalt (OIB)-like source in an anorogenic, within-plate setting. The emplacement of PG (c. 1257 Ma) in the vicinity of Mesoproterozoic Kanigiri Ophiolite (c. 1334 Ma) shows an age gap of nearly 77 Ma, which probably suggests PG emplacement in an extensional environment along a terrain boundary at the western margin of the Neoarchaean NSB in the EDC.

Re-Os Geochronology of the Liuchapo Formation across the Ediacaran-Cambrian Boundary of the Yangtze Block (South China)

The Ediacaran-Cambrian (E-C) succession in South China records remarkable oceanic, biological and geochemical variations, but it was not well defined geochronologically, which hinders the interpretation of the spatio-temporal seawater chemical architecture during the time E-C interval. This study presents two Re-Os isochron ages of 520.2 ± 6.1 and 561.7 ± 8.5 Ma for the barite-rich black shales from the top Liuchapo and Doushantuo formations respectively in Tianzhu County, Guizhou Province. In combination with existing age data, the two new Re-Os isochron ages suggest that the Liuchapo Formation was deposited between 550 and 520 Ma. Moreover, like the polymetallic Ni-Mo-PGE layers of shelf margin (or platform) facies and V-rich horizons of transitional (or shelf slope) to deep-water facies, the barite deposits were likely formed due to differential mineralization. The timing offset likely resulted from differential elemental concentration related to certain local factors (i.e., hydrothermal fluids, seawater redox and biological activity). The isochron-derived initial 187Os/188Os ratios of the top Liuchapo Formation (0.902 ± 0.048) and the Doushantuo Formation (0.740 ± 0.042) fall within the range of continental weathering flux (1.54) and oceanic crust (0.126), implying the involvement of marine hydrothermal fluids. Moreover, their difference of initial 187Os/188Os ratios may reflect variations of continental weathering intensity and uplift magnitude.

Tectonics of the Basement of the Kara-Bogaz Arch (Turan Plate)

The Kara-Bogaz geoblock is interpreted by many researchers as a structure underlain by the Precambrian sialic crust, incorporated in the young (epi-Hercynian) Turan Plate. The paper presents the results of a detailed study of the material composition of igneous and metamorphic rocks making up the basement of the Kara-Bogaz Arch and recovered by deep boreholes. To subdivide and correlate the sections, we employed data of geophysical borehole surveys, including all types of logging. Microscopic examination of rocks was also performed to determine their composition, genesis, and degree of postsedimentation alterations. Data on absolute ages of rocks and paleontological data were also employed. The results of the work of our predecessors have been studied and critically analyzed. It is established that there are no direct indications of the continental crust older than Paleozoic in the basement of the Near-Kara-Bogaz region. The metamorphic units of the Kara-Bogaz Arch are represented by primary sedimentary and volcanosedimentary deposits that were altered at the stage of regional greenschist metamorphism. These rocks are intruded by granitoid bodies corresponding to the final stages of Hercynian tectogenesis. In parts spatially close to intrusions, the degree of secondary alterations in metamorphic rocks increases due to the thermal effect. Amphibolites of the Kara-Bogaz Arch are metamorphosed igneous rocks, which are closely associated with primary terrigenous deposits and have undergone subsequent metamorphosis (greenschist facies regional metamorphism). Gneisses of the discussed region refer to the marginal facies of granitoid plutons that formed as a result of metasomatic reworking of the host strata (protomagmatic gneissic banding). We think that the Kara-Bogaz Arch is a Hercynian megaanticlinorium of the young platform, and this does not exclude the possibility of fragments of more ancient crust in the structure of this arch. The sedimentary–metamorphic and volcanosedimentary rocks making it up and intruded by multiple granitoid bodies are units of the active margin.

Sub-bottom and bathymetry sonar inspection of postglacial lacustrine infill of the alpine lakes (Tatra Mts., Slovakia)

An acoustic survey using sub-bottom sonar (SBS) and Autonomous Underwater Vehicle EcoMapper (AUVEM) combined with coring was used for the investigation of bottom topography, thickness of the sediments, and geodynamic factors influencing the postglacial deposition in Tatra Mts. lakes. This combined study of seven lakes shows four basic acoustic units and four subunits that are interpreted in terms of stratigraphy and lithology.However, the presence of particular acoustic units may not be encountered in all the lakes due to the effects of local and internal lake processes. Thick horizontal reflections with high amplitude reflectors characterize the bedrock or the infill with a thickness of more than 6 m. Chaotic internal reflection configuration and high amplitude reflectors are common and reflect the glacigene deposits of unknown thickness in the bottom of the lakes. Above the signals of glacigene sediments lie reflections with weak to moderate amplitude reflectors, and with a parallel and chaotic configuration. They correspond to the glaciolacustrine laminated clay and silt and postglacial gyttja that contain clastic outwash from various mass movement deposits. The transition zone between these two SBS reflections is formed by a discontinuous, parallel and wavy configuration with the acoustic bottom. This type of signal is interpreted as a mixture of cobbles, boulders, and fine-grained sediments.The exact lithological content and the presence of the acoustic units are determined by other factors that may not be visible around the lakes and can cause stratigraphic hiatuses. As a prominent and un-recognized factor in the Tatra Mts. until now is the presence of the bottom springs (pockmarks) of the non-karstic origin, which effectively disturb the fine clastic and organic matter deposition and hence can limit the use of the lake deposit for palaeoclimatic and palaeoecological studies. The mass movement processes – debris flow, rockfall – forming the mountain geo-relief are frequent and their products are visible in the marginal facies. The sonar inspection also provides evidence of mass movement deposits, which have no indication on the terrestrial environment and thereby represent intralacustrine landslides as a result of bedrock instability due to the late Pleistocene deglaciation or Holocene climatic variability.

Facies and Petrophysical Modeling of Triassic Chang 6 Tight Sandstone Reservoir, Heshui Oil Field, Ordos Basin, China

AbstractTight sandstone reservoirs are widely distributed worldwide. The Upper Triassic Chang 6 member of the Yanchang Formation is characterized by low permeability and porosity. The facies model offers a unique approach for understanding the characteristics of various environments also heterogeneity, scale, and control of physical processes. The role of subsurface facies features and petrophysical properties was unclear. Notable insufficient research has been conducted based on facies and petrophysical modeling and that demands to refine the role of reservoir properties. To tackle this problem, a reservoir model is to be estimated using various combinations of property modeling algorithms for discrete (facies) and continuous (petrophysical) properties. Chang 6 member consists of three main facies, i.e., channel, lobe main body, and lobe margin facies. The current research is aimed at comparing the applicability and competitiveness of various facies and petrophysical modeling methods. Further, well-log data was utilized to interpret unique facies and petrophysical models to better understand the reservoir architecture. Methods for facies modeling include indicator kriging, multiple-point geostatistics, surface-based method, and sequential indicator simulation. Overall, the indicator kriging method preserved the local variability and accuracy, but some facies are smoothed out. The surface-based method showed far better results by showing the ability to reproduce the geometry, extent, connectivity, and facies association. The multiple-point geostatistics (MPG) model accurately presented the facies profiles, contacts, geometry, and geomorphological features. Sequential indicator simulation (SIS) honored the facies spatial distribution and input statistical parameters. The porosity model built using sequential Gaussian simulation (SGS) showed low porosity (74% values <2%). Gaussian random function simulation (GRFS) models showed very low average porosity (8%-10%) and low permeability (less than 0.1 mD). These methods indicate that Chang 6 member is a typical unconventional tight sandstone reservoir with ultralow values of petrophysical properties.

The role of carbonate factories and sea water chemistry on basin‐wide ramp to high‐relief carbonate platform evolution: Triassic, Nanpanjiang Basin, South China

AbstractThe end‐Permian extinction and its aftermath altered carbonate factories globally for millions of years, but its impact on platform geometries remains poorly understood. Here, the evolution in architecture and composition of two exceptionally exposed platforms in the Nanpanjiang Basin are constrained and compared with geochemical proxies to evaluate controls on platform geometries. Geochemical proxies indicate elevated siliciclastic and nutrient fluxes in the basal Triassic, at the Induan—Olenekian boundary and in the uppermost Olenekian. Cerium/Ce* shifts from high Ce/Ce* values and a lack of Ce anomaly indicating anoxia during the Lower Triassic to a negative Ce anomaly indicating oxygenation in the latest Olenekian and Anisian. Uranium and Mo depletion represents widespread anoxia in the world's oceans in the Early Triassic with progressive oxygenation in the Anisian. Carbonate factories shifted from skeletal in the Late Permian to abiotic and microbial in the Early Triassic before returning to skeletal systems in the Middle Triassic, Anisian coincident with declining anoxia. Margin facies shifted to oolitic grainstone in the Early Triassic with development of giant ooids and extensive marine cements. Anisian margins, in contrast, are boundstone with a diverse skeletal component. The shift in platform architecture from ramp to steep, high‐relief, flat‐topped profiles is decoupled from carbonate compositions having occurred in the Olenekian prior to the onset of basin oxygenation and biotic stabilisation of the margins. A basin‐wide synchronous shift from ramp to high‐relief platforms points to a combination of high subsidence rate and basin starvation coupled with high rates of abiotic and microbial carbonate accumulation and marine cement stabilisation of oolitic margins as the primary causes for margin up‐building. High sea water carbonate saturation resulting from a lack of skeletal sinks for precipitation, and basin anoxia promoting an expanded depth of carbonate supersaturation, probably contributed to marine cement stabilisation of margins that stimulated the shift from ramp to high‐relief platform architecture.

Characteristics of “Guangyuan-Wangcang” trough during Late Middle Permian and its petroleum geological significance in northern Sichuan Basin, SW China

Based on outcrop characteristics, combined with regional tectonic background, drilling and geophysical data, the sedimentary characteristics of the Middle Permian Maokou Formation in the northern Sichuan Basin was studied by means of macroscopic and microscopic observation, geochemical element test, total organic carbon content and vitrinite reflectance measurement. There is a set of deep-water sediments rich in organic matter in the Guangyuan-Wangcang area of northern Sichuan during the late depositional period of the Middle Permian Maokou Formation. The strata are distributed from northwest to southeast, with thickness of 10–30 m, mainly composed of siliceous rocks and siliceous mudstones, intercalated with gravity flow deposits. Siliceous rocks and siliceous mudstones are characterized by thin single layer, flat bedding and rich siliceous radiolarians, calthrop and brachiopod with small body and thin shell, belonging to the typical sedimentary characteristics of deep-water trough facies. The contents of Cu, Co, Mo, Ni and the ratio of Ni to Co in the geochemical tests all indicate that the siliceous rocks are products of deep-water reducing environment. The TOC value ranges from 3.21% to 8.19%, with an average of 5.53%, indicating that the siliceous rocks have good hydrocarbon generation ability. The south side of the trough is in platform margin facies with high energy, and the sediments are mainly thick massive micritic-calcsparite biogenic (clastic) limestone, which is conducive to the formation and evolution of the reservoir. During the late sedimentary period of the Maokou Formation, the northward subduction and extension of the oceanic crust at the northwestern margin of the Yangtze Plate provided the internal dynamic conditions for the formation of the “Guangyuan-Wangcang” trough. According to the location, sedimentary characteristics and formation dynamics of the trough, it is similar to the “Kaijiang-Liangping” trough during Late Permian proposed by previous researchers. It is believed that the “Kaijiang-Liangping” trough already had its embryonic form during the Late Middle Permian.