Maquet Technique Research Articles

Patellar Proximo-Distal Displacement following Modified Maquet Technique Is Not Predictive of Patellar Luxation.

The aim of this study was to test the low sensitivity of the Allberg and Miles index to the stifle opening angle, evaluate the displacement of the patella after a Modified Maquet Technique using this index and assess the incidence of patellar luxation post-Modified Maquet Technique in dogs. Medical records were reviewed from 2012 to 2017. Allberg Miles index were determined for each stifle pre- and postoperatively, as well as the stifle joint opening of each case. Occurrence of patellar luxation was recorded. 137 stifles on 116 dogs were reviewed. The stifle opening angle did not influence the Allberg Miles index. Pre- and postoperative index showed a distal displacement of the patella after a Modified Maquet Procedure, especially at 135° of stifle opening angle. Only 1/137 cases demonstrated patellar luxation after the surgery. Based on our statistical analysis, we were able to conclude that within the maximum stifle opening angle range recorded in our series of cases; the Allberg Miles index variation was not significant. While patellar baja is clearly induced by the Modified Maquet Technique, the latter did not seem to predispose patients to post-operative patellar luxation in our study population.

Incidence of Patellar Desmopathy in the Modified Maquet Technique with and without PRGF

Patellar desmopathy can lead to desmitis, discomfort, and lameness. In the traditional MMT, a pin is used for the fixation of the fragment of the osteotomized tibia to the implant and the tibial diaphysis; this pin needs to be placed below the insertion of the patellar ligament to avoid damaging it. Considering the differences between TTA and MMT, the authors consider it important to determine the incidence of patellar desmopathy in the MMT. This is a prospective study that enrolled 53 owned dogs that underwent MMT and were followed up by a complete examination and radiograph controls to establish the patellar tendon thickening and the presence of clinical desmitis. The PRGF were administrated to 29 of those patients, in order to determine if PRGF’s action could decrease ligament desmitis. The conclusions in this study were that the desmopathy produced by the MMT is similar to that generated by the TTA if the pin is carefully placed; in addition, the PRGF did not decrease the inflammation and the thickening of the ligament.

Does PRGF Work? A Prospective Clinical Study in Dogs with A Novel Polylactic Acid Scaffold Injected with PRGF Using the Modified Maquet Technique.

Simple SummaryPRGF is a concentration of autologous platelets in a small volume of plasma, which is performed in a specific way and is an accessible resource in veterinary medicine. The PRGF has multiple demonstrated properties as antimicrobial, analgesic and anti-inflammatory but their osteoinductivity potential is controversial. We decided to use PRGF in combination with a PLA bioresorbable scaffold (a specific type of implant with osteoconduction properties) performed by 3D printing, and personalized for each patient, to determinate if the PRGF can produce osteoinduction and as a result, a faster bone healing and a faster patient recovery. Furthermore, in this study PLA scaffolds are proposed as an alternative for metallic implants to avoid the problems that those can cause. The MMT was the technique selected for solving the RCrCL as it is a variant of TTA that follows the same principle for the correction of the patellar tendon angle to neutralize distractive forces; however, this technique needs a lower amount of metallic implants for the scaffold fixation.Tibial tuberosity advancement is a surgical technique to restore the dynamical stability in the knee by advancing the insertion of the patellar ligament, for which it is necessary to advance the tibial crest, being maintained in the desired position usually by a cage and metallic implants. The purpose of this study was to replace the cage with a polylactic acid biodegradable scaffold designed for each patient by 3D printing, inserting platelet-rich in growth factors (PRGF) to demonstrate its osteoinductive properties. To this end, we used the modified Maquet technique to reduce the amount of metal to a minimum. Fifty-three dogs finished the study. The control and PRGF groups did not present any statistically significant differences in terms of ossification degree (p > 0.001) but they demonstrated satisfactory ossification compared to previous publications, although in the PRGF group three of the scaffolds suffered complete reabsorption. The PRGF and control groups did not show any statistically significant differences in terms of lameness degree (p > 0.001). However, the PRGF group showed at the first control some analgesic and anti-inflammatory properties but they were not enough for reducing the functional recovery time in a significant way. The PRGF group did not show any complications or negative results associated with their use.

Preliminary Clinical and Radiographic Evaluation of a Novel Resorbable Implant of Polylactic Acid (PLA) for Tibial Tuberosity Advancement (TTA) by Modified Maquet Technique (MMT).

Simple SummaryThe metallic implants carry many problems as infections, bone resorption, pain at the site, etc. Removing these metallic implants is an expensive procedure, and it entails risks. Due to the costs, the most common in veterinary medicine is to remove metallic implants only when a problem occurs. The rupture of the cranial cruciate ligament (RCrCL) is the most common orthopedic pathology in dogs and the most frequent cause of arthrosis, pain, and limp on the knee joint. Those are the reasons that encouraged us to develop a new type of biodegradable implant comprised of polylactic acid (PLA). This is a non-toxic material that can be eliminated by natural metabolic pathways and use the PLA implant in tibial tuberosity advancement (TTA), which is a technique for the resolution of RCrCL in dogs. In our study, PLA implants for TTA provide good functional results, presenting an acceptable number of complications. The implants show a faster ossification than metallic implants, which was not affected by age or by body weight. The PLA implants have a clinical recovery time similar to metallic implants.Our objectives were to determine whether PLA implants can be used in TTA with successful results; secondly, to observe whether they provide a faster bone healing; finally, to determine whether weight or age influences bone healing scores. PLA cages were created with a 3D printer. TTA by MMT with PLA implants was performed in 24 patients. Follow-ups were carried out pre-surgical, at 1, 2, and 5 months and consisted of a radiographic study and a lameness assessment. A comparison was performed in terms of weight and age. Patients data, time between follow-up examinations, healing score, and lameness score were compared between patients using commercial software for statistically significant differences p < 0.05. Eighteen dogs finished the study. The ossification degrees presented statistically significant differences between each other. PLA implants maintained the advancement in 100% of cases. Comparing weight and age did not present any statistically significant differences between groups. Lameness presented statistically significant differences between follow-up examinations. Complications were observed in 20.8%. PLA implants for TTA provide good functional results, presenting an acceptable rate of complications. They provide a faster bone healing of the osteotomy gap, which was not affected by age or body weight, and have a clinical recovery time similar to metallic implants.

The Ability to Achieve a Specific Target Angle on Weightbearing Radiographs After Valgus High Tibial Osteotomy for Medial Knee Arthritis Is Not Predictable

PurposeStanding radiographs are commonly used to plan angular correction in valgus tibial osteotomy for varus gonarthrosis. Most clinical studies have reported postoperative alignment as overall averages or means. The purpose of this study was to compare the preoperatively planned angle of correction measured on weight-bearing radiographs to the follow-up angle measured on weightbearing radiographs in individual patients 6 weeks after surgery and to analyze factors that could potentially affect achieving the planned degree of surgical correction. Our objective was to analyze factors potentially affecting the accuracy and ability to achieve the preoperatively planned correction angle (the target angle) in the individual patient.MethodsWe studied 35 tibial osteotomies (13 Coventry closing wedge osteotomies and 22 Maquet barrel vault osteotomies) performed for varus gonarthrosis between 1981 and 2019 to determine how accurately the target angle, based on preoperative standing weight-bearing radiographs, was achieved according to the postoperative radiographs in each individual. We reviewed 35 knees in 34 patients who had complete pre- and postoperative radiographs for review.ResultsOverall, only 14 of 35 (40%) of the patients were corrected to within ± 2° of the planned target angle. Valgus tibial osteotomy based on preoperative weightbearing radiographs is unpredictable in its ability to achieve the target angle on postoperative weightbearing radiographs when using either the Coventry or the Maquet surgical technique. The tendency was to undercorrect with either of the techniques. Larger (greater than 10°) preoperative varus alignment did not make it more difficult to achieve the target angle. Male or female sex and body mass index had no effect on the ability to achieve the target angle.ConclusionsValgus tibial osteotomy planning based on preoperative weightbearing is unpredictable in its ability to achieve the target angle on postoperative weightbearing radiographs. Overall, only 40% of our patients were corrected to within ± 2° of the planned target angle. The tendency was to undercorrect, with either the Coventry or the Maquet technique. Contrary to our hypothesis, larger preoperative varus alignment (greater than 10°) did not make it more difficult to achieve the target angle. The Coventry technique was as accurate as the Maquet technique.Level of EvidenceLevel IV.

Prospective clinical assessment of tibial tuberosity advancement for the treatment of cranial cruciate ligament rupture in dogs

To evaluate clinically dogs that underwent tibial tuberosity advancement (TTA) six months previously. Dogs of various breeds, gender, weight, and age that had CCL rupture and underwent TTA for treatment were included in this study. Parapatellar arthrotomy was performed in all patients to assess the joint for a ruptured ligament and meniscal injury before the TTA. The appropriate cage for the TTA was chosen with planning surgery. The surgical procedure was performed according to the literature, using a modified Maquet technique. Six months after surgery, lameness during walking; muscular atrophy; crepitation, cranial drawer and tibial compression tests and quality of life based on owner's evaluation were assessed. Postoperative complications were observed in only one knee (4.76%), with a surgical site seroma. The mean lameness score at walking was 0.29 (± 0.64). The mean score regarding muscular atrophy was 0.95 (± 1.56). The mean score of the cranial drawer test, in a range from 0 to 5, was 1.52 (± 1.54). The owners rated the dog's quality of life as excellent in 44%, good in 30%, and moderate in 17%. This clinical study supports the affirmation that patients who undergo TTA for treatment of CCL rupture have an acceptable response.

Risk factors for tibial damage associated with the modified Maquet technique in 174 stifles.

To identify risk factors for tibial damage associated with the modified Maquet technique (MMT) in dogs with cranial cruciate ligament (CCL) disease. Retrospective study. One hundred and seventy-four stifles from 147 client-owned dogs. Medical records of dogs diagnosed with CCL disease and treated with the current version of MMT were reviewed. Dogs were included if immediate postoperative radiographs were available. Cortical hinge fracture or fissure, tibial tuberosity fracture, and diaphyseal fractures of the tibia were recorded. Age, body weight (BW), thickness of the tibial cortical hinge, and angle of opening of the osteotomy were tested as potential risk factors for tibial damage by univariate logistic regression analysis. Tibial damage included intraoperative tibial fissures in 37% of MMTs, intraoperative fractures of the cortical hinge in 3.4% of MMTs, postoperative tibial fractures in 14% of MMTs. Risk factors for intraoperative fissure included BW (P = .0153) and thickness of cortical hinge (P = .0006). The angle of opening of the osteotomy was identified as a risk factor for intraoperative cortical hinge fracture (P = .0034), angles below 11° being preventive. No risk factor was identified for postoperative fracture. Based on these results, preventive measures against tibial damage associated with MMT should include: a thickness of cortical hinge based on the equation related to the BW; a length of osteotomy adjusted to the amount of TTA with an osteotomy angle below 10°; and slow advancement of the tibial tuberosity.

Evaluation of a new method to determine the tibial tuberosity advancement distance required to reduce the patellar tendon-tibial plateau angle to 90° with the modified Maquet technique in dogs.

OBJECTIVE To assess use of a new radiographic method to determine the distance by which the tibial tuberosity should be advanced to reduce the patellar tendon-tibial plateau angle (PTA) to 90° by means of the modified Maquet technique (MMT) in dogs. SAMPLE 24 pelvic limbs from 12 adult medium-sized to large-breed canine cadavers. PROCEDURES Radiographs of stifle joints at 135° extension in true lateral position were used to determine tibial tuberosity advancement distances for use in the MMT. A method was devised to incorporate the planned osteotomy axis; distal patellar translations of 0, 3, 5, or 10 mm; and advancement cage implant application level along the osteotomy site in advancement planning measurements. Concordance correlation coefficients (CCCs) were calculated to compare these adjusted advancement measurements with true advancement measurements obtained for the same joints in another study after treatment by MMT. Intraobserver, interobserver, and total agreement for selected measurements were determined by assessment of CCCs for results obtained by 3 blinded observers. RESULTS Agreement between true advancement measurements and measurements obtained with osteotomy axis and cage position method calculations that incorporated a 5-mm distal patellar translation distance was excellent (CCC, 0.96). Intraobserver and interobserver agreements for the planning measurements evaluated were good to excellent (CCC, 0.83 to 0.96). CONCLUSIONS AND CLINICAL RELEVANCE Results suggested that the osteotomy axis and cage position method incorporating a 5-mm distal patellar translation distance has the potential to improve success rates for achieving a PTA of 90° in medium-sized to large-breed dogs undergoing MMT for treatment of cranial cruciate ligament rupture. Further research is warranted.

A report of the Maquet procedure for the management of cranial cruciate ligament rupture in a dog - a case report

Cranial cruciate ligament rupture is the major cause of lameness and degenerative joint disease in the canine stifle. The cause of this disease is multifactorial, especially involving degenerative and inflammatory changes. Many techniques have been described for the management of this condition, and current recommendations include the use of corrective osteotomies, most recently using the Maquet (or modified Maquet) procedure. This technique is fundamentally similar to the classical tibial tuberosity advancement (TTA), but without the use of the bone plate. The main advantages of using this technique are a shorter operative time and less use of implants. The main complication of this technique is an increased risk of tibial crest fracture. This report describes the Maquet technique for the treatment of a three-year-old male West White Terrier dog with rupture of the cranial cruciate ligament. Cruciate ligament rupture was diagnosed by a positive cranial tibial drawer test. Mediolateral stifle radiography performed under anesthesia with the stifle in 135° of extension demonstrated a tibial plateau angle of 22°. A cage of six millimeters was necessary to allow advancement. The Maquet technique produced excellent post-operative results, including early weight-bearing and neutralization of the cranial tibial drawer. The consolidation time of the osteotomy was 63 days.

Complications and outcome of a new modified Maquet technique for treatment of cranial cruciate ligament rupture in 82 dogs.

To describe the complications, short and long-term outcome and owner satisfaction of dogs with cranial cruciate ligament rupture treated with a recently described new osteotomy for the modified Maquet technique (N-MMT). Medical records and radiographs of 82 dogs (84 stifles) were reviewed. Details regarding short-term outcome and complications were recorded from the medical records. Long-term follow-up information was obtained by telephone interview. Historical data and complications were statistically analysed. Major complications occurred in 34/84 stifles. Intra-operative complications occurred in 26/84 stifles, all of which were fissures or fractures of the cortical hinge. Twenty-one of these fractures or fissures were repaired with a figure-of-eight wire. The second most common major complication was late meniscal tears in 3/84 stifles. One dog sustained a complete tibial fracture. Non-displaced fracture of the cortical hinge was the most common postoperative minor complication, which occurred in 5/84 stifles. The median preoperative lameness score was 3 out of 6. Final in-hospital re-evaluation of limb function was available in 58 dogs. The median lameness score at that time was 0 out of 6. Development of osteotomy related complications was not associated with a significant change in the postoperative lameness score. Subjectively assessed clinical outcome with the N-MMT was good to excellent in this cohort of dogs. However, a high rate of intra- and postoperative complications of the N-MMT procedure was also present in these dogs.

Biomechanical testing of a β-tricalcium phosphate wedge for advancement of the tibial tuberosity

to evaluate in vitro the strength of different compositions of beta-tricalcium phosphate (β-TCP) wedges in comparison with titanium foam and cages. To study the response to cyclic loading of the strongest β-TCP wedge, titanium foam and titanium cage. Compression test: Twenty-five tibiae were prepared for tibial tuberosity advancement using the modified Maquet technique. Five groups were defined depending on the material used to maintain the tibial tuberosity: Group 1=titanium cage; Group 2=wedges of porous titanium foam with 50% porosity (OrthoFoam®); Group 3=blocks of biphasic synthetic bone (60% hydroxyapatite [HAP] and 40% β-TCP, porosity 80%); Group 4=blocks of biphasic synthetic bone (60% HAP and 40% β-TCP, porosity 70%) and Group 5=blocks of biphasic synthetic bone (65% HAP and 35% β-TCP, porosity 60%). Loads to failure were calculated for each implant. Cyclic study: Five additional tibiaes of group 1, 2 and 5 were fatigue tested from 100 to 500 N at a rate of 4 Hz for 200,000 cycles or until failure. Compression test: For the five groups, the mean load at failure was 1895 N, 1917 N, 178 N, 562 N and 1370 N respectively. Cyclical study: All samples in the three groups tested withstood 200,000 cycles without failure. The ideal implant to maintain tibial tuberosity advancement after the modified Maquet technique would be absorbable and allow osteoconduction and osteoinduction. As such, β-TCP wedges have many advantages and our study shows that they can withstand loads in the patellar tendon up to 500 N over 200,000 cycles in vitro and deserve more investigation.

A modified Maquet technique for management of cranial cruciate avulsion in a cat

This case report describes the management of cranial cruciate ligament avulsion from the femur of a four-year-old Norwegian Forest cat that presented with a history of lameness which had not improved with conservative treatment. During medial arthrotomy, avulsion of the cranial cruciate ligament from the caudomedial aspect of the lateral femoral condyle was suspected and the torn portion resected. A modified Maquet technique was performed on the left tibia resulting in a rapid improvement in lameness postoperatively. Histopathology of the resected cranial cruciate ligament confirmed avulsion. To the authors' knowledge this is the first reported use of this technique in the cat, and the first of stifle instability due to cranial cruciate ligament avulsion from the femur in the cat.

Mechanical testing of a new osteotomy design for tibial tuberosity advancement using the Modified Maquet Technique

To evaluate the mechanical properties of the distal cortical hinge associated with a new osteotomy design for the Modified Maquet Technique (MMT). Ex vivo mechanical study. The osteotomy was started 10 mm caudal to the tibial tuberosity and extended over 150% of the length of the tibial crest; it was slightly curved distally to stay at a distance of 2 to 4 mm from the cranial cortex, according to the body weight. Ninety-six tibiae were tested in advancement, and 60 tibiae were axially loaded perpendicular to the tibial plateau, until failure of the crest. Desired advancement was measured using the common tangent method in 60 tibiae. Angle of opening, thickness, and area of the cortical hinge were recorded. Desired advancement of 6 mm, 9 mm, 12 mm and 15 mm was recorded in 16, 12, 18 and 14 tibiae respectively. Mean maximal advancement in these bones was 15.6 ± 6.4 mm, 20.8 ± 5.2 mm, 21.3 ± 5.2 mm and 22.7 ± 5.2 mm respectively. The desired advancement was reached in all but one tibia. Advancement was mainly influenced by the angle of opening and the stiffness of the cortical hinge. Mean ultimate load to failure was 6.12 ± 2.4 times the body weight. It was significantly associated with the body weight, thickness, and area of the cortical hinge. Mean maximal advancement was higher than clinically required without occurrence of fissure or fracture. Ultimate load to failure and maximal advancement could be predicted using calculated formulae.

Preliminary experience of a modified Maquet technique for repair of cranial cruciate ligament rupture in dogs

The modified Maquet technique (MMT) uses the same principle as the tibial tuberosity advancement (TTA) for stabilization of the cranial cruciate ligament-deficient stifle in the dog. In the MMT, the tibial tuberosity is advanced in a similar manner to that used in the TTA, however the means by which the tibial crest is stabilized differs. The plate and fork originally described by Montavon et al. are not used (7). The MMT was first described by Maquet for use on humans; it leaves intact a distal bony attachment to the tibial shaft, and the tuberosity is either reinforced or not by a figure-of-eight wire. In this paper, we describe the MMT, and we report the results of our first 20 canine patients with cranial cruciate ligament rupture that were treated by the MMT. Mean clinical bone healing time was 6.8 weeks (range 4 to 12 weeks). The evidence provided by this clinical communication suggests that it is technically possible to achieve an advancement of the tibial tuberosity without the need for a plate. The MMT deserves consideration as a primary treatment option for cranial cruciate ligament rupture in dogs, and further evaluation in large clinical studies. Long-term follow-up and force plate analysis would be necessary to compare the MMT to both the TTA and the tibial plateau levelling osteotomy.