Mapping Of Resonant Inelastic X-ray Research Articles

Unveiling charge compensation mechanisms in Na2/3MgxNi1/3-xMn2/3O2 cathode materials: insights into cationic and anionic redox

P2-type Na2/3Ni1/3Mn2/3O2 cathode material for sodium-ion batteries exhibits negligible voltage hysteresis during charge and discharge cycles, with oxygen redox mechanisms playing a pivotal, non-negligible role. Conversely, for the Na2/3Mg1/3Mn2/3O2 material featuring Mg substitution for Ni, O redox largely governs the entire charge and discharge process, accompanied by a pronounced voltage hysteresis. Upon combining these two materials – Na2/3MgxNi1/3-xMn2/3O2 – the transition metal and O redox processes, constituting the charge compensation mechanism, become paramount. These phenomena underscore the transition metal's influence on anionic redox, a topic with limited in-depth exploration in the existing literature. Within this study, we synthesized two materials, Na2/3Mg1/9Ni2/9Mn2/3O2 and Na2/3Mg2/9Ni1/9Mn2/3O2 (Mg-0.11, Mg-0.22), subsequently probing their transition metal and oxygen redox contributions to electrochemical capacity during the initial and 10th cycle charge and discharge processes by synchrotron-based mapping of resonant inelastic X-ray scattering and soft X-ray Absorption Spectroscopy. Our findings corroborate the presence of similar O redox contributions in the Mg-substituted materials. Intriguingly, the Mg-0.11 material exhibits a substantial enhancement in O redox following ten cycles, warranting further investigation due to its exceptional multiplicity, cycling performance, minimal voltage hysteresis, and potential impact on advancing sodium-ion battery commercialization.

Enhancing the Reversibility of Lattice Oxygen Redox Through Modulated Transition Metal-Oxygen Covalency for Layered Battery Electrodes.

Utilizing reversible lattice oxygen redox (OR) in battery electrodes is an essential strategy to overcome the capacity limitation set by conventional transition metal redox. However, lattice OR reactions are often accompanied with irreversible oxygen oxidation, leading to local structural transformations and voltage/capacity fading. Herein, it is proposed that the reversibility of lattice OR can be remarkably improved through modulating transition metal-oxygen covalency for layered electrode of Na-ion batteries. By developing a novel layered P2-Na0.6 Mg0.15 Mn0.7 Cu0.15 O2 electrode, it is demonstrated that the highly electronegative Cu dopants can improve the lattice OR reversibility to 95% compared to 73% for Cu-free counterpart, as directly quantified through high-efficiency mapping of resonant inelastic X-ray scattering. Crucially, the large energetic overlap between Cu 3d and O 2p states dictates the rigidity of oxygen framework, which effectively mitigates the structural distortion of local oxygen environment upon (de)sodiation and leads to the enhanced lattice OR reversibility. The electrode also exhibits a completely solid-solution reaction with an ultralow volume change of only 0.45% and a reversible metal migration upon cycling, which together ensure the improved electrochemical performance. These results emphasize the critical role of transition metal-oxygen covalency for enhancing the reversibility of lattice OR toward high-capacity electrodes employing OR chemistry.

Precisely quantifying bulk transition metal valence evolution in conventional battery electrode by inverse partial fluorescence yield

Precisely quantifying transition metal (TM) redox in bulk is a key to understand the fundamental of optimizing cathode materials in secondary batteries. At present, the commonly used methods to probe TM redox are hard X-ray absorption spectroscopy (hXAS) and soft X-ray absorption spectroscopy (sXAS). However, they are both facing challenges to precisely quantify the valence states of some transition metals such as Mn. In this paper, Mn-L iPFY (inverse partial fluorescence yield) spectra extracted from Mn-L mRIXS (mapping of resonant inelastic X-ray scattering) is adopted to quantify Mn valence states. Mn-L iPFY spectra has been considered as a bulk-sensitive, non-distorted probe of TM valence states. However, the exact precision of this method is still unclear in quantifying practical battery electrodes. Herein, a series of LiMn2O4 electrodes with different charge and discharge states are prepared. Based on their electrochemical capacity (generally considered to be very precise), the precision of Mn iPFY in quantifying bulk Mn valence state is confirmed, and the error range is unraveled. Mn-L mRIXS iPFY thus is identified as one of the best methods to quantify the bulk Mn valence state comparing with hXAS and sXAS.

Oxygen-redox reactions in LiCoO2 cathode without O–O bonding during charge-discharge

Summary Oxygen activity in highly delithiated LiCoO2 is critical to fully utilizing the energy density of this high-tap-density cathode but still lacks a clear understanding. In this work, we combined the results of several experimental techniques, especially resonant inelastic X-ray scattering (RIXS) and neutron pair distribution function (NPDF) analysis, together with theoretical calculations to study this topic. Our results conclude that oxygen redox takes place globally in the lattice, rather than forming localized dimerization as previously thought. RIXS results directly reveal the reversible oxygen redox, and NPDF results show that the O–O pair distance is considerably shortened in the highly delithiated LiCoO2. Theoretical calculations indicate that no O–O bonding is formed in LiCoO2, in sharp contrast to the lithium-rich system in which O–O bonding does form. These results provide the rationale for achieving a reversible deep delithiation and high energy density for LiCoO2-based electrodes.

Could Irradiation Introduce Oxidized Oxygen Signals in Resonant Inelastic X-ray Scattering of Battery Electrodes?

The characterization of oxidized oxygen states through high-efficiency mapping of resonant inelastic X-ray scattering (mRIXS) has become a crucial approach for studying the oxygen redox activities in high-energy battery cathodes. However, this approach has been recently challenged due to the concern of irradiation damage. Here we revisited a typical Li-rich electrode, Li1.144Ni0.136Mn0.544Co0.136O2, in both lithiated and delithiated states and evaluated the X-ray irradiation effect in the lengthy mRIXS experiments. Our results show that irradiation cannot introduce any oxidized oxygen feature, and the features of oxidized oxygen are weakened with a high X-ray dose. The results confirm again that mRIXS detects the intrinsic oxidized oxygen state in battery electrodes. However, the distinct irradiation effects in different systems imply that irradiation could selectively target the least stable elemental or chemical states, which should be analyzed with caution in the study of active chemical states.

Redox Mechanism in Na-Ion Battery Cathodes Probed by Advanced Soft X-Ray Spectroscopy.

A Na-ion battery (NIB) device is a promising solution for mid-/large-scale energy storage, with the advantages of material abundance, low cost, and environmental benignity. To improve the NIB capacity and retainability, extensive efforts have been put into the developments of NIB electrode materials. The redox activities of the transition metal (TM)-based NIB electrodes are critical in defining the capacity and stability. Here, we provide a comprehensive review on recent studies of the redox mechanisms of NIB cathodes through synchrotron-based soft X-ray absorption spectroscopy (sXAS) and mapping of resonant inelastic X-ray scattering (mRIXS). These soft X-ray techniques are direct and effective tools to fingerprint the TM-3d and O-p states with both bulk and surface sensitivities. Particularly, 3d TM L-edge sXAS has been used to quantify the cationic redox contributions to the electrochemical property; however, it suffers from lineshape distortion for the bulk sensitive signals in some scenarios. With the new dimension of information along the emitted photon energy, mRIXS can address the distortion issue of in TM-L sXAS; moreover, it also breaks through the limitation of conventional sXAS on detecting unconventional TM and O states, e.g., Mn(I) in NIB anode and oxidized oxygen in NIB cathodes. The mRIXS fingerprint of the oxidized oxygen state enables the detection of the reversibility of the oxygen redox reaction through the evolution of feature intensity upon electrochemical cycling and thus clarifies various misunderstandings in our conventional wisdom. We conclude that, with mRIXS established as a powerful tool, its potential and power will continue to be explored for characterizing novel chemical states in NIB electrodes.

Insights of the anionic redox in P2–Na0.67Ni0.33Mn0.67O2

The search for high-energy batteries has promoted intense attention to anionic redox in layered transition metal oxides because of their ability of delivering much higher capacity than traditional cathodes. P2–Na 0.67 Ni 0.33 Mn 0.67 O 2 electrode exhibits outstanding air-stability and high average potential. Very recently, the anionic redox in this promising sodium cathode has been evidenced by mapping of resonant inelastic X-ray scattering. However, the origin of this oxygen redox has not been recognized yet. Here, based on the combination of X-ray absorption spectroscopy and density functional theory (DFT) calculations, we demonstrate that with the remove of Na + , the Ni 2+ oxidized to Ni 3+ and followed by the oxidation of lattice oxygen. Our DFT calculation further confirms that the oxygen redox in Na 0.67 Ni 0.33 Mn 0.67 O 2 is rooted from Ni–O anti-bonding ( e g *) state rather than the non-bonding O 2p band and result in the highly reversible oxygen redox reactions without O 2 loss. Moreover, at very low sodium contents, it is highly possible that a charge redistribution process between the Ni and O ions occurs, which results in the inconsistent experimental observations in previous references. • Confirm the anionic redox reactions in P2–Na 0.67 Ni 0 . 33 Mn 0 . 67 O 2 at low sodium contents via h-XAS and DFT calculations. • No oxygen loss is observed during the first charge process of P2–Na 0.67 Ni 0.33 Mn 0.67 O 2 . • Clarify the insights of anionic redox in P2–Na 0.67 Ni 0.33 Mn 0.67 O 2 .

Fluorination effect for stabilizing cationic and anionic redox activities in cation-disordered cathode materials

Cation-disordered Li-excess cathodes with oxygen redox reactions are promising candidates for high-energy-density Li ion batteries. Nevertheless, the oxygen redox process that is required for the high capacity often comes with the oxygen loss, which leads to severe capacity degradation and voltage decay. In this work, we have successfully synthesized a series of Li-excess cation-disordered cathodes (Li1.2Mn0.4+xTi0.4-xO2-xFx) (0 ​≤ ​x ​≤ ​0.2) with different fluorine (F) contents. The electrochemical performance results show that the Li1.2Mn0.55Ti0.25O1.85F0.15 (LMTOF0.15) exhibits the highest reversible capacity (275 mAh g-1, under 30 ​mA ​g-1), cyclability, and voltage retentions. The mapping of resonant inelastic X-ray scattering (mRIXS) and differential electrochemical mass spectroscopy (DEMS) results reveal that the fluorination enhances the reversible lattice oxygen redox reaction while suppressing irreversible gas release and surface reactions. The X-ray Absorption Spectroscopy (XAS) during the initial two cycles shows that F-substitution alleviates the reduction of the Mn valence state during the whole (dis)charge processes in the bulk and at the surface of the material, results in higher average discharge voltage. In addition, the introduction of F improves the structural stability and suppresses local lattice distortion of the material. Therefore, LMTOF0.15 is able to cycle with smaller polarization, less interfacial side reaction and Mn dissolution, and therefore results in enhanced cyclability. This work provides a comprehensive understanding of the fluorination effect on the cationic and anionic redox activities in cation-disordered Li-excess cathodes.

Carbon decorated Li3V2(PO4)3 for high-rate lithium-ion batteries: Electrochemical performance and charge compensation mechanism

Fast charging and high-power delivering batteries are highly demanded in mobile electronics, electric vehicles and grid energy storage, but there are full of challenges. The star-material Li3V2(PO4)3 is demonstrated as a promising high-rate cathode material meeting the above requirements. Herein, we report the carbon decorated Li3V2(PO4)3 (LVP/C) cathode prepared via a facile method, which displays a remarkable high-rate capability and long-term cycling performance. Briefly, the prepared LVP/C delivers a high discharge capacity of 122 mAh g−1 (~93% of the theoretical capacity) at a high rate up to 20 C and a superior capacity retention of 87.1% after 1000 cycles. Importantly, by applying a combination of X-ray absorption spectroscopy and full-range mapping of resonant inelastic X-ray scattering, we clearly elucidate the structural and chemical evolutions of LVP upon various potentials and cycle numbers. We show unambiguous spectroscopic evidences that the evolution of the hybridization strength between V and O in LVP/C as a consequence of lithiation/delithiation is highly reversible both in the bulk and on the surface during the discharge-charge processes even over extended cycles, which should be responsible for the remarkable electrochemical performance of LVP/C. Our present study provides not only an effective synthesis strategy but also deeper insights into the surface and bulk electrochemical reaction mechanism of LVP, which should be beneficial for the further design of high-performance LVP electrode materials.

Negligible voltage hysteresis with strong anionic redox in conventional battery electrode

Abstract Lattice anionic (oxygen) redox reactions (ARR) offers opportunities for developing high-capacity batteries, however, often suffers the notoriously high hysteresis in voltages and low initial coulombic efficiency. Particularly, ARR was widely considered inherent to these kinetic issues. In this paper, unambiguous evidences of strong and reversible ARR is found in Na2/3Ni1/3Mn2/3O2 through mapping of resonant inelastic X-ray scattering (mRIXS). Strikingly, the material displays negligible voltage hysteresis (0.1 V) and high initial coulombic efficiency with a highly stable electrochemical profile. Our independent analysis of the Ni, Mn and O states consistently interpret the redox mechanism of Na2/3Ni1/3Mn2/3O2, which reveals a strong ARR system with facile kinetics and highly stable electrochemical profile that previously found only in cationic redox systems of conventional non-Alkali-rich materials.

Full Energy Range Resonant Inelastic X-ray Scattering of O2 and CO2: Direct Comparison with Oxygen Redox State in Batteries.

The evolving oxygen state plays key roles in the performance and stability of high-energy batteries involving oxygen redox reactions. Here, high-efficiency full energy range O-K mapping of resonant inelastic X-ray scattering (mRIXS) was collected from O2 (O0) and CO2 (O2- with strong covalency) molecules and compared directly with Li2O2 (O-) and the oxidized oxygen state in representative Na/Li-ion battery electrodes. Our results confirm again that the critical mRIXS feature around the 523.7 eV emission energy is from intrinsically oxidized oxygen, but not from the highly covalent oxygen state (CO2). The comparison of the mRIXS profile of the four different oxygen states, i.e., O2-, O-, On- (0 < n < 2), and O0, reveals that oxygen redox states in batteries have distinct widths and positions along the excitation energy compared with Li2O2 and O2. The nature of the oxidized oxygen state in oxide electrodes is thus beyond a simple molecular configuration of either peroxide or O2.

Advances in soft X-ray RIXS for studying redox reaction states in batteries.

Redox (reduction and oxidation) chemistry provides the fundamental basis for numerous energy-related electrochemical devices. Detecting the electrochemical redox chemistry is pivotal but challenging because it requires independent probes of the cationic and anionic redox states at different electrochemical states. The synchrotron-based soft X-ray mapping of resonant inelastic X-ray scattering (mRIXS) has recently emerged as a powerful tool for exploring such states in electrochemical devices, especially batteries. High-efficiency mRIXS covers the energy range of the absorption edge with the extra dimension of information on the emitted photon energies. In this frontier article, we review recent representative demonstrations of utilizing soft X-ray mRIXS for detecting the novel chemical state during electrochemical operation and for quantifying the cationic redox reactions through inverse partial fluorescence yield analysis (mRIXS-iPFY). More importantly, the non-divalent states of oxygen in electrodes involving oxygen redox reactions could be reliably captured by mRIXS, with its reversibility quantified by the intensity variation of the characteristic mRIXS feature through a super-partial fluorescence yield analysis (mRIXS-sPFY). These recent demonstrations inspire future perspectives on using mRIXS for studying the complex phenomena in energy materials, with both technical and scientific challenges in RIXS theory, in situ/operando experiments, and spatially resolved RIXS imaging.

Quantification of Anionic Redox Chemistry in a Prototype Na-Rich Layered Oxide.

Harnessing anionic redox reactions is of prime importance for boosting the capacity of sodium-ion batteries (NIBs). However, quantifying the cyclability of anionic redox reactions is still challenging. Herein, we conduct a qualitative and quantitative investigation of the cationic and anionic redox reactions of a prototype Na-rich layered oxide, namely, Na3RuO4, by a combination of bulk-sensitive X-ray absorption spectroscopy and full-range mapping of resonant inelastic X-ray scattering. We unequivocally reveal that both Ru cations and oxygen anions are involved in the charge compensation process of Na3RuO4. Ru redox is highly reversible over extended electrochemical cycles, while the cyclability of lattice oxygen redox gradually decreases with the retention of only 36% after 30 cycles, which is mainly responsible for the capacity fading of Na3RuO4. Our findings provide deeper insights into the complex oxygen redox mechanism, which plays a decisive role for designing high-energy Na-rich electrode materials for NIBs.

Elucidation of Anionic and Cationic Redox Reactions in a Prototype Sodium-Layered Oxide Cathode.

The ever-increasing demand for large-scale energy storage has driven the prosperous investigation of sodium-ion batteries (NIBs). As a promising cathode candidate for NIBs, P2-type Na2/3Ni1/3Mn2/3O2 (NaNMO), a prototype sodium-layered oxide, has attracted extensive attention because of its high operating voltage and high capacity density. Although its electrochemical properties have been extensively investigated, the fundamental charge compensation mechanism, that is, the cationic and anionic redox reactions, is still elusive. In this report, we have systematically investigated the transition metal and oxygen redox reactions of NaNMO nanoflakes using bulk-sensitive soft X-ray absorption spectroscopy and full-range mapping of resonant inelastic X-ray scattering from an atomic-level view. We show that the bulk Mn3+/Mn4+ redox couple emerges from the first discharge process with the increment of inactive Mn3+ upon cycling, which may have a negative effect on the cyclability. In contrast, the bulk Ni redox mainly stems from the Ni2+/Ni3+ redox couple, in contrast to the conventional wisdom of the Ni2+/Ni4+ redox couple. The quantitative analysis provides unambiguous evidence for the continuous reduction of the average valence state of Mn and Ni over extended cycles, leading to the voltage fading. In addition, we reveal that the oxygen anions also participate in the charge compensation process mainly through irreversible oxygen release rather than reversible lattice oxygen redox. Such understanding is vital for the precise design and optimization of NaNMO electrodes for rechargeable NIBs with outstanding performance.

Fingerprint Oxygen Redox Reactions in Batteries through High-Efficiency Mapping of Resonant Inelastic X-ray Scattering

Realizing reversible reduction-oxidation (redox) reactions of lattice oxygen in batteries is a promising way to improve the energy and power density. However, conventional oxygen absorption spectroscopy fails to distinguish the critical oxygen chemistry in oxide-based battery electrodes. Therefore, high-efficiency full-range mapping of resonant inelastic X-ray scattering (mRIXS) has been developed as a reliable probe of oxygen redox reactions. Here, based on mRIXS results collected from a series of Li1.17Ni0.21Co0.08Mn0.54O2 electrodes at different electrochemical states and its comparison with peroxides, we provide a comprehensive analysis of five components observed in the mRIXS results. While all the five components evolve upon electrochemical cycling, only two of them correspond to the critical states associated with oxygen redox reactions. One is a specific feature at 531.0 eV excitation and 523.7 eV emission energy, the other is a low-energy loss feature. We show that both features evolve with electrochemical cycling of Li1.17Ni0.21Co0.08Mn0.54O2 electrodes, and could be used for characterizing oxidized oxygen states in the lattice of battery electrodes. This work provides an important benchmark for a complete assignment of all mRIXS features collected from battery materials, which sets a general foundation for future studies in characterization, analysis, and theoretical calculation for probing and understanding oxygen redox reactions.

High Reversibility of Lattice Oxygen Redox Quantified by Direct Bulk Probes of Both Anionic and Cationic Redox Reactions

The reversibility and cyclability of anionic redox in battery electrodes hold the key to its practical employments. Here, through mapping of resonant inelastic X-ray scattering (mRIXS), we have independently quantified the evolving redox states of both cations and anions in Na2/3Mg1/3Mn2/3O2. The bulk-Mn redox emerges from initial discharge and is quantified by inverse-partial fluorescence yield (iPFY) from Mn-L mRIXS. Bulk and surface Mn activities likely lead to the voltage fade. O-K super-partial fluorescence yield (sPFY) analysis of mRIXS shows 79% lattice oxygen-redox reversibility during initial cycle, with 87% capacity sustained after 100 cycles. In Li1.17Ni0.21Co0.08Mn0.54O2, lattice-oxygen redox is 76% initial-cycle reversible but with only 44% capacity retention after 500 cycles. These results unambiguously show the high reversibility of lattice-oxygen redox in both Li-ion and Na-ion systems. The contrast between Na2/3Mg1/3Mn2/3O2 and Li1.17Ni0.21Co0.08Mn0.54O2 systems suggests the importance of distinguishing lattice-oxygen redox from other oxygen activities for clarifying its intrinsic properties.

Spectroscopic Signature of Oxidized Oxygen States in Peroxides.

Recent debates on the oxygen redox behaviors in battery electrodes have triggered a pressing demand for the reliable detection and understanding of nondivalent oxygen states beyond conventional absorption spectroscopy. Here, enabled by high-efficiency mapping of resonant inelastic X-ray scattering (mRIXS) coupled with first-principles calculations, we report distinct mRIXS features of the oxygen states in Li2O, Li2CO3, and especially, Li2O2, which are successfully reproduced and interpreted theoretically. mRIXS signals are dominated by valence-band decays in Li2O and Li2CO3. However, the oxidized oxygen in Li2O2 leads to partially unoccupied O-2p states that yield a specific intraband excitonic feature in mRIXS. Such a feature displays a specific emission energy in mRIXS, which disentangles the oxidized oxygen states from the dominating transition-metal/oxygen hybridization features in absorption spectroscopy, thus providing critical hints for both detecting and understanding the oxygen redox reactions in transition-metal oxide based battery materials.