Management Circuit Research Articles

A Synergistically Enhanced Triboelectric-Electromagnetic Hybrid Generator Enabled by Multifunctional Amorphous Alloy for Highly Efficient Self-Powered System.

Triboelectric-electromagnetic hybrid generator (TEHG) has emerged as an effective technology for mechanical energy harvesting. However, the independent operation of triboelectric nanogenerator (TENG) and electromagnetic generator (EMG), along with tribo-materials wear and magnetic field divergence, constrain the device's overall performance. To address these challenges, a synergistically enhanced TEHG (SE-TEHG) is proposed based on the multifunctional amorphous alloy. Following detailed material analyses, Fe72Si8B20 is selected as the synergistic layer for its low surface roughness, high Vickers-hardness, amorphous structure, and high magnetization. Compared to Al, this material not only boosts TENG's output current and current retention rate by 28.75% and 85.24%, but also improves EMG's output power by 51.05%. In constructing a self-powered system with TEHG, a significant impedance discrepancy exists between the energy harvester (with matched impendence of 16 MΩ for TENG and 110 kΩ for EMG) and the application end. Without power management circuits, the demonstrated self-powered variable impedance system achieves an energy utilization efficiency that is 2.98 times greater than the conventional constant impedance system. The integration of multifunctional materials to realize strong-coupling hybrid generators, combined with the customization of variable impedance systems, set a milestone in efficient mechanical energy harvesting and utilization.

Significantly Enhanced Output Performance of Triboelectric Nanogenerators via Charge Storage and Release Strategy.

As a novel energy harvesting technology, bettering the output performance of triboelectric nanogenerators (TENGs) is vital. Although quite a number methods to increase charge density have been proposed, challenges such as high impedance matching and low output current persist, severely limit the energy utilization efficiency of TENGs. Here, a new power management circuit (PMC) is proposed that through charge storage and release strategy. This circuit first excites the surface charge of the TENG using the charge excitation circuit, and then releases the stored charge through a self-triggered switch. Compared to a standard TENG, the output current of the TENG with this PMC is increased by a factor of 1108, the impedance is decreased from 100 MΩ to 10 kΩ, and the energy utilization efficiency is markedly improved. This work affords a reference for enhancing the output performance of TENG, reducing impedance, and broading the utility attainable of TENGs.

High-Performance Rotating Structure Triboelectric-Electromagnetic Hybrid Nanogenerator for Environmental Wind Energy Harvesting.

As environmental energy harvesting gains increasing importance in self-powered systems and large-scale energy demands, wind energy, as a clean, pollution-free, and renewable source, has garnered widespread attention. However, achieving efficient wind energy collection remains challenging. This study proposes a high-performance rotating structure triboelectric-electromagnetic hybrid nanogenerator designed for environmental wind energy harvesting. By optimizing the magnetic circuit design of the electromagnetic generator, the dispersed radial magnetic field is converted into a unified axial magnetic field, enabling efficient power generation with only a single annular coil, thereby simplifying the generator design and reducing manufacturing and maintenance costs. Additionally, a triboelectric nanogenerator design with soft contact friction between polycarbonate (PC) fur and fluorinated ethylene propylene (FEP) film was implemented, optimizing the spacing between the electrode and friction layers, thus enhancing output performance and device durability. Furthermore, we simulated and experimentally tested the output waveform of the designed hybrid generator structure, with the results showing a high degree of similarity, further validating the rationality of the device design and providing guidance for structural optimization. Subsequently, we achieved efficient energy storage using an energy management circuit (EMC). With the integration of the EMC, the generator successfully powered a Bluetooth temperature and humidity sensor at a wind speed of 10 m/s, achieving wireless transmission, and demonstrating its potential application in traffic signal systems and other natural environmental systems. This research provides an important reference for further exploration of novel wind energy harvesting technologies.

High‐Gain Boost Converter Based Energy Harvesting Method for the Ultra‐Low Voltage Difference of HVDC Transmission Line

ABSTRACTOnline monitoring sensors are crucial for ensuring the long‐term stable operation of high‐voltage direct current (HVDC) transmission systems. However, ensuring a sustainable and reliable energy supply for these sensors in the HVDC transmission line is extremely challenging. Energy harvesting is an efficient solution to meet the energy supply needs of self‐powered online monitoring sensors. This work proposes a novel method for harvesting energy from the ultra‐low voltage difference of HVDC transmission line using a high‐gain boost converter. Firstly, the structure of the energy harvesting system is proposed. Then, the mechanism by which the gain of the boost converter is easily affected by parasitic parameters of the circuit and device under ultra‐low input voltage is analyzed. A method for automatically stabilizing the output voltage of the boost converter using a post‐stage energy management circuit is proposed. This method avoids the use of closed‐loop control circuits, which would otherwise increase losses. Finally, the boost converter with high gain is designed to elevate the ultra‐low voltage difference to a higher voltage, providing sufficient power for the online monitoring sensors. The effectiveness of the proposed method has been verified through simulations and experiments, demonstrating that the energy harvesting system can extract energy from a voltage difference as low as 35 mV. Additionally, the system can produce a stable output power of up to 128 mW when the voltage difference is 100 mV.

Hybrid Wind‐Solar Self‐Powered Detector System Using a Triboelectric‐Photovoltaic Generator for Smart Agriculture

The growth of crops is affected by factors such as temperature, humidity, and salinity, so it is critical to monitor these indicators through detectors in smart agriculture. Collecting renewable energy in the farmland environment to power the detector will provide a feasible approach. Therefore, a triboelectric‐photovoltaic hybrid generator (WS‐TPHG) is proposed to collect solar and wind energy efficiently. The generator structure includes a photovoltaic panel (PV) and a wind‐driven triboelectric nanogenerator (W‐TENG). The switching function of the power supply can be realized through the power management circuit. In the case of sufficient light, the detector is powered by PV steadily, and in the case of insufficient light, the detector is powered by W‐TENG via the switching function. The PV can supply a stable voltage of 8.1 V, and the open‐circuit voltage (VOC) of W‐TENG can reach 478.6 V at 180 rpm. The results verify that the detection of temperature, humidity, and salinity can be successfully achieved through the detector which is powered by WS‐TPHG. In this article, the potential application of WS‐TPHG is demonstrated in farmland to provide a solution for the sustainable development of agriculture.

A High-Efficiency Piezoelectric Energy Harvesting and Management Circuit Based on Full-Bridge Rectification

This paper presents a high-efficiency piezoelectric energy harvesting and management circuit utilizing a full-bridge rectifier (FBR) designed for powering wireless sensor nodes. The circuit comprises a rectifier bridge, a fully CMOS-based reference source, and an energy management system. The rectifier bridge uses a PMOS cross-coupled structure to greatly reduce the conduction voltage drop. The CMOS reference source provides the necessary reference voltage and current. The energy management system delivers a stable 1.8 V to the load and controls its operation in intermittent bursts. Fabricated with a 110 nm CMOS process, the circuit occupies an area of 0.6 mm2, and is housed in a QFN32 package. Test results indicate that under 40 Hz frequency and 4 g acceleration vibrations, the chip’s energy extraction power reaches 234 μW, with the load operating every 3 s at a supply voltage of 1.8 V. Thus, this FBR interface circuit efficiently harnesses the energy output from the piezoelectric energy harvester.

Enhancing Energy Harvesting Efficiency from Ambient Sources through Advanced Materials and Nanotechnology

The utilization of ambient energy sources for powering small-scale electronic devices and sensors has garnered significant attention due to its potential for sustainable and autonomous operation. This research focuses on enhancing the efficiency of energy harvesting from ambient sources, such as vibrations, heat differentials, and electromagnetic fields, through the integration of advanced materials and nanotechnology into energy harvesting systems. The study begins with a comprehensive review of existing energy harvesting technologies, highlighting their limitations in terms of efficiency, scalability, and adaptability to various ambient energy sources. It identifies the key challenges faced in achieving high energy conversion rates and explores the potential of advanced materials and nanoscale structures to address these challenges. One aspect of the research involves the development and characterization of novel materials with superior energy conversion properties. This includes the synthesis of piezoelectric materials for vibration energy harvesting, thermoelectric materials for heat-to-electricity conversion, and nanomaterials for enhancing electromagnetic energy harvesting efficiency. Advanced characterization techniques, such as scanning electron microscopy (SEM) and X-ray diffraction (XRD), are employed to analyze the structural and electrical properties of these materials. Furthermore, the study investigates the design and fabrication of nanostructured energy harvesting devices optimized for specific ambient energy sources. This involves the integration of nanoscale components, such as nanostructured electrodes, into energy harvesting systems to improve energy capture and conversion rates. Finite element analysis (FEA) simulations and experimental testing are conducted to evaluate the performance and efficiency of these nano-enhanced energy harvesting devices under real-world conditions. The research also addresses the optimization of energy harvesting system parameters, including resonance tuning, impedance matching, and energy management circuits, to maximize energy extraction and utilization. Computational modeling techniques, such as multiscale modeling and finite element simulations, are utilized to optimize system configurations and improve overall energy harvesting efficiency. Overall, this research contributes to the advancement of energy harvesting technologies by leveraging advanced materials and nanotechnology, paving the way for sustainable and autonomous power generation from ambient energy sources for a wide range of applications.

Self-Supplying Photovoltaic-Hygroelectric Coupling System Powering Internet of Things Sensors.

The rapid advancement in the Internet of Things (IoT) has prompted a proliferation of sensor applications with increasing focus on harnessing environmental energy sources for powering these sensors. However, owing to the variability inherent in climatic and geographic conditions, a singular approach to environmental energy harvesting often fails to deliver sustainable and reliable power. Hygroelectric technology, leveraging the electrical coupling between nanostructured materials and water to convert moisture-derived energy into electricity, complements the advantages of light energy collection technology. In this study, an ion diode moisture-based power generation array was fabricated to yield an open-circuit voltage of 8 V and a short-circuit current of 3 mA under an 86.9% relative humidity (RH). Subsequently, integration of a photovoltaic module with the hygroelectric generator assembly via an energy management circuit augmented the system's overall power generation, manifesting a remarkable 1150% increase over the original moisture-based power generation configuration. Furthermore, the incorporation of such a hybridized system bolstered the operational efficiency, extending the duration of continuous power supply cycles by up to 78.2% in comparison with the control group with no moisture-derived energy input. This pioneering endeavor unveils a novel light-moisture coupling energy-harvesting paradigm tailored for sustaining uninterrupted power provision in wireless sensor network nodes, and the harvesting of one energy source is not affected by the other energy source at all. With its inherent adaptability, this approach holds promise for deployment in outdoor environments characterized by low illumination levels and high humidity, presenting a versatile solution to address sensor powering challenges.

AI-enhanced backpack with double frequency-up conversion vibration energy converter for motion recognition and extended battery life

With growing interest in physical activities, wearable device sales have been increasing each year due to their help in tracking movement. However, keeping these devices running for a long time is still a key challenge. This paper presents an AI-enhanced backpack equipped with a hybrid vibration energy converter that integrates piezoelectric (PE) and electromagnetic (EM) technologies, featuring a double frequency-up conversion (FUC) mechanism. The PE unit enables efficient motion recognition, while the EM unit extends battery life via kinetic energy harvesting. The double FUC mechanism boosts human motion signal strength and resolution by converting sub-Hertz frequencies to hundreds of Hertz. This makes the device particularly effective in environments with performance constraints and interference. By adopting deep learning techniques, the system maintains a high motion recognition accuracy of 97.33 % even under low data sampling rates and significant noise interference. The EM unit effectively harvests kinetic energy, generating an average output power of 4.5 mW during activities such as running at 4.5 Hz, despite of the device’s compact size. Additionally, a power management circuit with human motion-stimulated switch optimizes battery life by managing the system’s sleep and active states. This innovative energy management approach ensures that during human activity, the system conserves energy by remaining in sleep state for at least 30 % of the time, significantly extending battery life and enhancing the backpack’s suitability for outdoor applications.

Analysis and Application of Poly(vinyl alcohol) (PVA) and Polyacrylonitrile (PAN) Nanofiber Membrane-Based Triboelectric Nanogenerators.

The triboelectric property of materials is used to harvest energy from intentional or nonintentional sources of vibration. Contact mode freestanding dielectric based nanogenerators (CFTENGs) have many advantages when compared with other modes of triboelectric nanogenerators. The property of dielectric materials plays an important role in the energy harvesting process. In this work, we aim to fabricate nanofiber membranes of poly(vinyl alcohol) (PVA) and polyacrylonitrile (PAN) and study their properties for CFTENGs. The morphology and porosity of both membranes were tested experimentally. The mechanical property is modeled with a representative volume element (RVE) technique to understand its deflection behavior. In addition, an electromechanical model is developed to predict and analyze the behavior of those membranes in the energy conversion process. Our research reveals that the PAN dielectric layer achieves a maximum open circuit voltage of 192 kV compared to the PVA dielectric layer (2.2 kV) in the CFTENG system. In comparison, the dielectric layer of the PAN nanofiber membrane reflects its flexibility to generate electrical energy in a CFTENG with the effect of contact electrification and electrostatic induction under various sources of unused energies for a wide range of applications. Moreover, the same methodology is applied to various sources of vibration, and their performance is reported. With an appropriate power management circuit, we can design a PAN membrane-based TENG for various applications.

Aurivillius-Type SrBi4Ti4O15/PGA Composite Film-Based Flexible Triboelectric Nanogenerators for Energy Harvesting/Storage and Multipurpose Tap-Indication Transducer Applications.

Recent advancements in flexible triboelectric nanogenerators (TENGs) have widely focused on converting mechanical energy into electrical energy to power small wearable electronic gadgets and sensors. To effectively achieve this, an efficient energy-converted power management circuit is required. Herein, we report on Aurivillius-type strontium bismuth titanate (SrBi4Ti4O15) nanoparticles (SBT NPs)-loaded polyglucosamine (PGA) composite film-based flexible TENG to be used for energy harvesting/storage and biomechanical applications. Initially, SBT NPs were synthesized and then, different weight concentrations were loaded into PGA. The TENG devices were fabricated using different wt % composite films (SBT/PGA) and polydimethylsiloxane as positive and negative triboelectric layers, respectively, and aluminum was used as a conductive electrode attached to two tribo films. To evaluate the electrical output from the device, contact-separation operation mode was used. An optimized TENG consisting of 2 wt % SBT/PGA composite film produced the maximum electrical output voltage and current of approximately ∼239 V and ∼7.5 μA, respectively. Efficient TENG energy harvesting and storage circuits have been proposed for storing charges in capacitors and for operating electronic gadgets. The optimized TENG was employed to generate electrical energy from various biomechanical movements. Thereafter, the biodegradability of the composite film was also tested. The fabricated films were completely biodegraded within a few hours. Furthermore, the TENG was utilized as a tap-indication transducer for multipurpose switching applications.

Investigating superior performance by configuring bimetallic electrodes on fabric triboelectric nanogenerators (F-TENGs) for IoT enabled touch sensor applications

Fabric Triboelectric Nanogenerators (F-TENGs) are increasingly becoming more significant in wearable monitoring and beyond. These devices offer autonomous energy generation and sensing capabilities, by replacing conventional batteries in flexible wearables. Despite the substantial effort, however, achieving high output with optimal stability, durability, comfort, and washability poses substantial challenges, so we have yet to see any practical commercial uses of these materials. This study focuses on output and investigates the impacts of mono and bimetallic composite fabric electrode configurations on the output performance of F-TENGs. Our findings showcase the superiority of bimetallic configurations, particularly those incorporating Copper (Cu) with Nickel (Ni), over monometallic (Cu only) electrodes. These configurations demonstrate remarkable results, exhibiting a maximum instantaneous voltage, current, and power density of ∼ 199 V (a twofold increase compared to monometallic configurations), ∼22 μA (a threefold increase compared to monometallic configurations), and 2992 mW/m², respectively. Notably, these bimetallic configurations also exhibit exceptional flexibility, shape adaptability, structural integrity, washability, and mechanical stability. Furthermore, the integration of passive component-based power management circuits significantly enhances the performance capabilities of the F-TENGs, highlighting the essential role of power management circuits and electrode selection in optimizing F-TENGs. In addition, we have developed a complete IoT-enabled touch sensor system using CuNi-BEF EcoFlex layered F-TENGs for precise detection of soft and hard touches. This advanced system enhances robotic functionality, enabling nuanced touch understanding essential for precision tasks and fostering more intuitive human-machine interactions.

Durable Multilayered Sleeve-Structured Hybrid Nanogenerator for Efficient Water Wave Energy Harvesting.

The state-of-the-art triboelectric nanogenerator (TENG) technology has numerous advantages and creates new prospects for the rapid development of the Internet of Things (IoT) in marine environments. Here, to accelerate the application process of TENG, an elaborately designed multilayered sleeve-structured hybrid nanogenerator (M-HNG) is developed to efficiently and persistently harvest marine energy. The M-HNG integrates an electromagnetic nanogenerator (EMG) with four coils and a multilayered sleeve-structured TENG (MS-TENG) with three freestanding layer units to increase spatial utilization efficiency. Moreover, rabbit fur strips are introduced to enhance the output performance and strengthen the durability of TENG. Therefore, the MS-TENG has high durability due to its soft-contact structure, maintaining its performance even after 240,000 cycles. When a 1000 μF capacitor is charged by M-HNG utilizing a power management circuit (PMC), the stored energy is increased from 2.62 mJ to 140.11 mJ, representing a significant improvement of 52-fold. The M-HNG triggered by water waves has successfully powered various small electronic devices, including 1200 LED lights, nine thermo-hygrometers, a water quality testing pen, and water level alarms. The proposed M-HNG effectively harvests low-frequency water wave energy, introducing an innovative concept for constructing a hybrid TENG with enhanced density and durability.

Efficient energy conversion mechanism and energy storage strategy for triboelectric nanogenerators

Energy management strategy is the essential approach for achieving high energy utilization efficiency of triboelectric nanogenerators (TENGs) due to their ultra-high intrinsic impedance. However, the proven management efficiency in practical applications remains low, and the output regulation functionality is still lacking. Herein, we propose a detailed energy transfer and extraction mechanism addressing voltage and charge losses caused by the crucial switches in energy management circuits. The energy conversion efficiency is increased by 8.5 times through synergistical optimization of TENG and switch configurations. Furthermore, a TENG-based power supply with energy storage and regularization functions is realized through system circuit design, demonstrating the stable powering electronic devices under irregular mechanical stimuli. A rotating TENG that only works for 21 s can make a hygrothermograph work stably for 417 s. Even under hand driving, various types of TENGs can consistently provide stable power to electronic devices such as calculators and mini-game consoles. This work provides an in-depth energy transfer and conversion mechanism between TENGs and energy management circuits, and also addresses the technical challenge in converting unstable mechanical energy into stable and usable electricity in the TENG field.

Construction of small size and high output triboelectric nanogenerator by multi-layer-stacking and charge excitation

Abstract The triboelectric nanogenerator (TENG) has been considered a low-frequency mechanical energy collection and conversion device in the modern era. The reasonable stack structure of TENG is an effective method to boost its electric output performance within a limited space. Nevertheless, relying solely on the stacking structure, the TENG is unable to produce excessive output due to the low contact electrification capability of its materials. Hence, there are still significant challenges in enhancing the output performance of stacked TENGs. We propose a multi-layer-stack TENG (M-TENG) with two zigzag-shaped (Z-shaped) multilayer units interleaving and stacking with each other, which enormously enlarges the effective utilization area. Furthermore, a voltage multiplier circuit (VMC) incorporating a Zener diode allows the transfer charge to approach the critical threshold and maintain a stable output. The transfer charge and current of M-TENG integrated with a VMC can reach 1.52 μC and 86 μA, respectively, with the maximum output of the TENG being 8.65 mW (5 MΩ). To prove it as a self-power device, M-TENG excited by a VMC is employed to power 912 light-emitting diodes (LEDs) and three temperature and humidity sensors with a power management circuit (PMC), respectively. This work offers a new method for optimizing stacking-layer TENG electric output performance in a narrow space.

Steady Output Triboelectric-Electromagnetic Hybrid Generator with Variable Drag Turbine Blades for Natural Wind Energy Harvesting.

In recent years, the triboelectric-electromagnetic hybrid generator (TEHG) has been widely studied. However, the problems of unsteady output and high starting wind speed of traditional TEHG in the wind energy environment have not been effectively solved. This work introduces an innovative solution in the form of a steady output triboelectric-electromagnetic hybrid generator (SO-TEHG) with variable drag turbine blades. The SO-TEHG integrates the energy management circuit to output steady electric energy under random wind conditions. In addition, the integration of variable drag turbine blades with the triboelectric nanogenerator (TENG) reduces the wind speed threshold required for SO-TEHG activation. In comparison to the traditional turbine blades, which necessitate a minimum wind speed of 3 m/s, the SO-TEHG's innovative design allows it to commence power generation at a lower 2 m/s wind speed, producing an additional output of 50 V. This enhanced starting capability in mild breezes positions the SO-TEHG as an ideal power source for applications. In practical farmland settings, experimental results conclusively demonstrate the SO-TEHG's ability to successfully activate soil hygrothermographs and hydrogen sensors. As a steady power source driven by gentle winds, the SO-TEHG holds tremendous promise for advancing smart agriculture.

Fully Integrated Direct Current Triboelectric Nanogenerators Coupled with Charge Pump and Electric Field Enhancing Effect Enabling Improved Output Performance

AbstractDirect‐current triboelectric nanogenerators (DC‐TENGs) arising from electrostatic breakdown have garnered significant attention due to their advantages of rectification‐free operation, constant current output, and high output power density. Previous studies have primarily concentrated on improving its performance through structural design and parameter optimization, neglecting the potential benefits of external charge excitation. Here, a facile and universal strategy coupling charge pump and electric field enhancing effect with DC‐TENG (CE‐DC‐TENG) is proposed to improve the output performance of DC‐TENG. An alternating current TENG is used as the charge pump. A field‐enhancing conductive layer, which is introduced under the main DC‐TENG, is connected with the pump TENG to accumulate the charge and enhance the electric field for electrostatic breakdown. The effectiveness of this method is demonstrated by linear and rotary sliding mode TENGs. Furthermore, a fully integrated rotary sliding mode CE‐DC‐TENG is designed and fabricated, and it exhibits impressive performance with a 13‐fold higher power density of 1.56 W m−2 compared to conventional DC‐TENG. Moreover, it can directly power small electronics or be combined with a designed power management circuit for more efficient energy conversion. This work presents a new design strategy for improving the performance of DC‐TENG and facilitating its practical applications.

From natural abundant silk to TENG; from biowaste to carbon supercap: A natural sustainable approach of active energy storage

Integrating an energy harvester and energy storage into a single unit, without connecting any external source, has gathered substantial attention for its ability to convert and store energy in a single device. This study introduces an innovative, self-sustaining power cell called the self-power supercapacitor (SPSC). The SPSC consists of two triboelectric nanogenerators (TENG) and a carbon based supercapacitor cell sandwiched between two TENGs. The SPSC utilizes the energy produced by two TENGs and stores it directly in the supercapacitor, bypassing the requirement of power management circuits. This energy storage process is achieved using tribo-electrochemical methodology. The supercapacitor consists of activated porous carbon obtained from natural biowaste, infused with an ionic liquid electrolyte gel. Each TENG is constructed using a blend of naturally abundant Silk with PVA and PVDF as triboelectric components and exhibit a maximum voltage of 800 V with an instantaneous output power density of 598 mW/cm2. In addition, the self-power supercapacitor effectively gets charged to a voltage of 0.8 V after continuous tapping of 100 s Due to the huge active surface area of the activated carbon electrodes, the device attains a specific capacitance of 43.75 mF/cm2. The assessed specific energy and specific power of the assembled SPSC device were 3.89 mWh/cm2 and 666.67 mW/cm2, respectively when subjected to tapping operations. The self-power supercapacitor cell also has the ability to power a range of portable electronics, such as LED. This research evidences the competence of charging the supercapacitor of SPSC system using TENGs without the need for an external parameter.

Standalone Stretchable Biophysical Sensing System Based on Laser Direct Write of Patterned Porous Graphene/Co3O4 Nanocomposites.

Skin-interfaced wearable sensors can continuously monitor various biophysical and biochemical signals for health monitoring and disease diagnostics. However, such devices are typically limited by unsatisfactory and unstable output performance of the power supplies under mechanical deformations and human movements. Furthermore, there is also a lack of a simple and cost-effective fabrication technique to fabricate and integrate varying materials in the device system. Herein, we report a fully integrated standalone stretchable biophysical sensing system by combining wearable biophysical sensors, triboelectric nanogenerator (TENG), microsupercapacitor arrays (MSCAs), power management circuits, and wireless transmission modules. All of the device components and interconnections based on the three-dimensional (3D) networked graphene/Co3O4 nanocomposites are fabricated via low-cost and scalable direct laser writing. The self-charging power units can efficiently harvest energy from body motion into a stable and adjustable voltage/current output to drive various biophysical sensors and wireless transmission modules for continuously capturing, processing, and wirelessly transmitting various signals in real-time. The novel material modification, device configuration, and system integration strategies provide a rapid and scalable route to the design and application of next-generation standalone stretchable sensing systems for health monitoring and human-machine interfaces.

Direct Current Triboelectric Nanogenerator Based on Contact Electrification, Air Breakdown, Electrostatic Induction, and Charge Leakage for Self‐powered Applications

AbstractDiverging from air breakdown‐based triboelectric nanogenerators (TENGs), recent TENG designs present high output power density without requiring precise control over discharge channels. However, existing researches predominantly ascribe its direct current output to electrostatic induction, disregarding the critical factor of charge leakage. This oversight hampers efforts to improve device performance, especially in material selection and optimization. Here, the generation of direct current signals ultimately stems from material charge leakage and spatial electrostatic induction is illustrated. Through theoretical analysis, visualization, and experimental measurement of four phenomena in the device, a quadruple‐effect mechanoelectrical conversion mechanism is established to refine the material selection rule. Under this guideline, the output power density is increased by 34.42% in contrast to the electrostatic induction direct current TENG. For practical applications, a power management circuit is utilized to boost the device's charging rate by up to 18 times. Furthermore, the high voltage of the device can activate discharge‐type UV tubes, demonstrating great potential in developing self‐powered wastewater treatment systems. The multiple charge behaviors proposed in this work, along with the material selection rule, lay a solid foundation for achieving high output power density in direct current TENGs.