Maltose-binding Proteins Research Articles

MILKSHAKE Western blot and Sundae ELISA: We all scream for better antibody validation

Knowing that an antibody's sensitivity and specificity is accurate is crucial for reliable data collection. This certainty is especially difficult to achieve for antibodies (Abs) which bind post-translationally modified proteins. Here we describe two validation methods using surrogate proteins in western blot and ELISA. The first method, which we termed “MILKSHAKE” is a modified maltose binding protein, hence the name, that is enzymatically conjugated to a peptide from the chosen target which is either modified or non-modified at the residue of interest. The surety of the residue's modification status can be used to confirm Ab specificity to the target's post-translational modification (PTM). The second method uses a set of surrogate proteins, which we termed “Sundae”. Sundae consists of a set of modified maltose binding proteins with a genetically encoded target sequence, each of which contains a single amino acid substitution at one position of interest. With Sundae, Abs can be evaluated for binding specificities to all twenty amino acids at a single position. Combining MILKSHAKE and Sundae methods, Ab specificity can be determined at a single-residue resolution. These data improve evaluation of commercially available Abs and identify off-target effects for Research-Use-Only and therapeutic Abs.

Structural Validation by the G-Factor Properly Regulates Boost Potentials Imposed in Conformational Sampling of Proteins.

Free energy landscapes (FELs) of proteins are indispensable for evaluating thermodynamic properties. Molecular dynamics (MD) simulation is a computational method for calculating FELs; however, conventional MD simulation frequently fails to search a broad conformational subspace due to its accessible timescale, which results in the calculation of an unreliable FEL. To search a broad subspace, an external bias can be imposed on a protein system, and biased sampling tends to cause a strong perturbation that might collapse the protein structures, indicating that the strength of the external bias should be properly regulated. This regulation can be challenging, and empirical parameters are frequently employed to impose an optimal bias. To address this issue, several methods regulate the external bias by referring to system energies. Herein, we focused on protein structural information for this regulation. In this study, a well-established structural indicator (the G-factor) was used to obtain structural information. Based on the G-factor, we proposed a scheme for regulating biased sampling, which is referred to as a G-factor-based external bias limiter (GERBIL). With GERBIL, the configurations were structurally validated by the G-factor during biased sampling. As an example of biased sampling, an accelerated MD (aMD) simulation was adopted in GERBIL (aMD-GERBIL), whereby the aMD simulation was repeatedly performed by increasing the strength of the boost potential. Furthermore, the configurations sampled by the aMD simulation were structurally validated by their G-factor values, and aMD-GERBIL stopped increasing the strength of the boost potential when the sampled configurations were regarded as low-quality (collapsed) structures. This structural validation is regarded as a "Brake" of the boost potential. For demonstrations, aMD-GERBIL was applied to globular proteins (ribose binding and maltose-binding proteins) to promote their large-amplitude open-closed transitions and successfully identify their domain motions.

Statistical Equivalence Testing of Higher-Order Protein Structures with Differential Hydrogen Exchange-Mass Spectrometry (HX-MS).

Hydrogen exchange-mass spectrometry (HX-MS) is widely recognized for its potential utility for establishing the equivalence of the higher-order structures of proteins, particularly in comparability and similarity contexts. However, recent progress in the statistical analysis of HX-MS data has instead placed an emphasis on significance testing to identify regions of proteins where there are significant differences in HX between two or more protein states. In the cases involving assessment of similarity or equivalence of the higher-order structure of different protein samples (e.g., biosimilars), significance testing of HX-MS data is unsuitable. To meet this need, we have adapted the univariate two one-sided test (TOST) equivalence testing method for HX-MS data. Equivalence acceptance criteria were determined using maximum deviations from randomized resampling of truly equivalent samples to define hybrid equivalence criteria (maximum deviation of true equivalents, MDTE). Application of the TOST-MDTE test on differential HX-MS measurements of wild-type and mutated maltose-binding proteins demonstrates that the equivalence testing method was fit-for-purpose. Three infliximab biosimilars (Remsima, Renflexis, and Inflectra) were found to be equivalent to their Remicade reference product based on differential HX-MS measurements, while 5% deglycosylated NIST mAb was not statistically equivalent to the unmodified NIST mAb reference.

Structure dictates the mechanism of ligand recognition in the histidine and maltose binding proteins.

Two mechanisms, induced fit (IF) and conformational selection (CS), have been proposed to explain ligand recognition coupled conformational changes. The histidine binding protein (HisJ) adopts the CS mechanism, in which a pre-equilibrium is established between the open and the closed states with the ligand binding to the closed state. Despite being structurally similar to HisJ, the maltose binding protein (MBP) adopts the IF mechanism, in which the ligand binds the open state and induces a transition to the closed state. To understand the molecular determinants of this difference, we performed molecular dynamics (MD) simulations of coarse-grained dual structure based models. We find that intra-protein contacts unique to the closed state are sufficient to promote the conformational transition in HisJ, indicating a CS-like mechanism. In contrast, additional ligand-mimicking contacts are required to “induce” the conformational transition in MBP suggesting an IF-like mechanism. In agreement with experiments, destabilizing modifications to two structural features, the spine helix (SH) and the balancing interface (BI), present in MBP but absent in HisJ, reduce the need for ligand-mimicking contacts indicating that SH and BI act as structural restraints that keep MBP in the open state. We introduce an SH like element into HisJ and observe that this can impede the conformational transition increasing the importance of ligand-mimicking contacts. Similarly, simultaneous mutations to BI and SH in MBP reduce the barrier to conformational transitions significantly and promote a CS-like mechanism. Together, our results show that structural restraints present in the protein structure can determine the mechanism of conformational transitions and even simple models that correctly capture such structural features can predict their positions. MD simulations of such models can thus be used, in conjunction with mutational experiments, to regulate protein ligand interactions, and modulate ligand binding affinities.

The Anti-Aggregation Holdase Hsp33 Promotes the Formation of Folded Protein Structures

Holdase chaperones are known to be central to suppressing aggregation, but how they affect substrate conformations remains poorly understood. Here, we use optical tweezers to study how the holdase Hsp33 alters folding transitions within single maltose binding proteins and aggregation transitions between maltose binding protein substrates. Surprisingly, we find that Hsp33 not only suppresses aggregation but also guides the folding process. Two modes of action underlie these effects. First, Hsp33 binds unfolded chains, which suppresses aggregation between substrates and folding transitions within substrates. Second, Hsp33 binding promotes substrate states in which most of the chain is folded and modifies their structure, possibly by intercalating its intrinsically disordered regions. A statistical ensemble model shows how Hsp33 function results from the competition between these two contrasting effects. Our findings reveal an unexpectedly comprehensive functional repertoire for Hsp33 that may be more prevalent among holdases and dispels the notion of a strict chaperone hierarchy.

Differential Substrate Recognition by Maltose Binding Proteins Influenced by Structure and Dynamics.

The genome of the hyperthermophile Thermotoga maritima contains three isoforms of maltose binding protein (MBP) that are high-affinity receptors for di-, tri-, and tetrasaccharides. Two of these proteins (tmMBP1 and tmMBP2) share significant sequence identity, approximately 90%, while the third (tmMBP3) shares less than 40% identity. MBP from Escherichia coli (ecMBP) shares 35% sequence identity with the tmMBPs. This subset of MBP isoforms offers an interesting opportunity to investigate the mechanisms underlying the evolution of substrate specificity and affinity profiles in a genome where redundant MBP genes are present. In this study, the X-ray crystal structures of tmMBP1, tmMBP2, and tmMBP3 are reported in the absence and presence of oligosaccharides. tmMBP1 and tmMBP2 have binding pockets that are larger than that of tmMBP3, enabling them to bind to larger substrates, while tmMBP1 and tmMBP2 also undergo substrate-induced hinge bending motions (∼52°) that are larger than that of tmMBP3 (∼35°). Small-angle X-ray scattering was used to compare protein behavior in solution, and computer simulations provided insights into dynamics of these proteins. Comparing quantitative protein-substrate interactions and dynamical properties of tmMBPs with those of the promiscuous ecMBP and disaccharide selective Thermococcus litoralis MBP provides insights into the features that enable selective binding. Collectively, the results provide insights into how the structure and dynamics of tmMBP homologues enable them to differentiate between a myriad of chemical entities while maintaining their common fold.

A Quantum Dot-Protein Bioconjugate That Provides for Extracellular Control of Intracellular Drug Release.

The ability to control the intracellular release of drug cargos from nanobioconjugate delivery scaffolds is critical for the successful implementation of nanoparticle (NP)-mediated drug delivery. This is particularly true for hard NP carriers such as semiconductor quantum dots (QDs) and gold NPs. Here, we report the development of a QD-based multicomponent drug release system that, when delivered to the cytosol of mammalian cells, is triggered to release its drug cargo by the simple addition of a competitive ligand to the extracellular medium. The ensemble construct consists of the central QD scaffold that is decorated with a fixed number of maltose binding proteins (MBPs). The MBP binding site is loaded with dye or drug conjugates of the maltose analogue beta-cyclodextrin (βCD) to yield a QD-MBP-βCD ensemble conjugate. The fidelity of conjugate assembly is monitored by Förster resonance energy transfer (FRET) from the QD donor to the dye/drug acceptor. Microplate-based FRET assays demonstrated that the βCD conjugate was released from the MBP binding pocket by maltose addition with an affinity that matched native MBP-maltose binding interactions. In COS-1 cells, the microinjected assembled conjugates remained stably intact in the cytosol until the addition of maltose to the extracellular medium, which underwent facilitated uptake into the cell. Live cell FRET-based confocal microscopy imaging captured the kinetics of realtime release of the βCD ligand as a function of extracellular maltose concentration. Our results demonstrate the utility of the self-assembled QD-MBP-βCD system to facilitate intracellular drug release that is triggered extracellularly through the simple addition of a well-tolerated nutrient and is not dependent on the use of light, magnetic field, ultrasound, or other traditional methods of stimulated drug release. We expect this extracellularly triggered drug release modality to be useful for the in vitro characterization of new drug candidates intended for systemic delivery/actuation and potentially for on-demand drug release in vivo.

Plants water soluble chlorophyll binding proteins act as enzyme-inhibitor pair

The hydrophilic water-soluble chlorophyll binding proteins (WSCP) which form complex with chlorophyll molecules have been numerously isolated from the chloroplasts of plants. Although, their molecular properties have been partly characterized, but their physio-biochemical roles are still unclear in the photosynthesizing organs. In this study, using bioinformatic tools WSCP pair were predicted to act as hydrolase and hydrolase inhibitor towards chlorophyll molecules. To enhance our information regarding the possible functions of WSCP, we cloned WSCP1 and WSCP2 cDNAs from Chenopodium album L. and Brassica oleracea L. leaves and expressed them as soluble maltose-binding fusion proteins in Escherichia coli. The purified fused products were subjected to chlorophyll hydrolyzing activity in vitro. The results showed that WSCP1 and WCSP2 are antagonistically involved in chlorophyll breakdown, while WSCP1 acts as chlorophyll hydrolyzing enzyme (with the hydrolysis rate of about 40% per 12 h), WSCP2 exerts inhibitory activity (with the inhibition rate of about 38% per 12 h) towards chlorophyll hydrolysis. This is the first ever time report speculates the hydrolase/inhibitory roles for WSCP and proposes that the relative activity of WSCP pair might balance and regulate the chlorophyll breakdown process in the photosynthetic apparatus of plants. It may open the new gate to investigate the potent roles of WSCP in plant system.

Functional-Group-Dependent Formation of Bioactive Fluorescent-Plasmonic Nanohybrids

We detail the assembly, driven by metal-affinity coordination, of fluorescent-plasmonic hybrid constructs that are also biologically active. The hybrid constructs are prepared by first assembling polymer-encapsulated luminescent quantum dots that present amine-, carboxy-, and lipoic acid-terminated groups (QD-FG) and plasmonic gold nanoparticles capped with rather low density of lipoic acid-appended zwitterion ligands (AuNP-LA-ZW). The dual QD-AuNP constructs were then coupled to polyhistidine-appended maltose binding proteins, yielding the final trifunctional assemblies. The coordination of amine-, carboxy-, and lipoic acid-terminated QDs with AuNP-LA-ZW was characterized using steady-state and time-resolved fluorescence quenching measurements. We measured rather different coordination affinities between the functional groups on the QDs and the AuNP surfaces. This assembly mode still allowed the partially exposed AuNPs in the inorganic/polymer hybrid to bind to polyhistidine-appended proteins. This prote...

Easy mammalian expression and crystallography of maltose-binding protein-fused human proteins.

We present a strategy to obtain milligrams of highly post-translationally modified eukaryotic proteins, transiently expressed in mammalian cells as rigid or cleavable fusions with a mammalianized version of bacterial maltose-binding protein (mMBP). This variant was engineered to combine mutations that enhance MBP solubility and affinity purification, as well as provide crystal-packing interactions for increased crystallizability. Using this cell type-independent approach, we could increase the expression of secreted and intracellular human proteins up to 200-fold. By molecular replacement with MBP, we readily determined five novel high-resolution structures of rigid fusions of targets that otherwise defied crystallization.

Exploring the Unfolding Pathway of Maltose Binding Proteins: An Integrated Computational Approach.

Recent single-molecule force spectroscopy experiments on the Maltose Binding Proteins (MBPs) identified four stable structural units, termed unfoldons, that resist mechanical stress and determine the intermediates of the unfolding pathway. In this work, we analyze the topological origin and the dynamical role of the unfoldons using an integrated approach which combines a graph-theoretical analysis of the interaction network of the MBP native-state with steered molecular dynamics simulations. The topological analysis of the native state, while revealing the structural nature of the unfoldons, provides a framework to interpret the MBP mechanical unfolding pathway. Indeed, the experimental pathway can be effectively predicted by means of molecular dynamics simulations with a simple topology-based and low-resolution model of the MBP. The results obtained from the coarse-grained approach are confirmed and further refined by all-atom molecular dynamics.

Site‐Selective Protein Immobilization through 2‐Cyanobenzothiazole‐Cysteine Condensation

We described a rapid site-selective protein immobilization strategy on glass slides and magnetic nanoparticles, at either the N or C terminus, by a 2-cyanobenzothiazole (CBT)-cysteine (Cys) condensation reaction. A terminal cysteine was generated at either terminus of a target protein by a combination of expressed protein ligation (EPL) and tobacco etch virus protease (TEVp) digestion, and was reacted with the CBT-solid support to immobilize the protein. According to microarray analysis, we found that glutathione S-transferase immobilized at the N terminus allowed higher substrate binding than for immobilization at the C terminus, whereas there were no differences in the activities of N- and C-terminally immobilized maltose-binding proteins. Moreover, immobilization of TEVp at the N terminus preserved higher activity than immobilization at the C terminus. The success of utilizing CBT-Cys condensation and the ease of constructing a terminal cysteine using EPL and TEVp digestion demonstrate that this method is feasible for site-selective protein immobilization on glass slides and nanoparticles. The orientation of a protein is crucial for its activity after immobilization, and this strategy provides a simple means to evaluate the preferred protein immobilization orientation on solid supports in the absence of clear structural information.

Maltodextrin-Modified Magnetic Microspheres for Selective Enrichment of Maltose Binding Proteins

In this work, maltodextrin-modified magnetic microspheres Fe3O4@SiO2-Maltodextrin (Fe3O4@SiO2-MD) with uniform size and fine morphology were synthesized through a facile and low-cost method. As the maltodextrins on the surface of microspheres were combined with maltose binding proteins (MBP), the magnetic microspheres could be applied to enriching standard MBP fused proteins. Then, the application of Fe3O4@SiO2-MD in one-step purification and immobilization of MBP fused proteins was demonstrated. For the model protein we examined, Fe3O4@SiO2-MD showed excellent binding selectivity and capacity against other Escherichia coli proteins in the crude cell lysate. Additionally, the maltodextrin-modified magnetic microspheres can be recycled for several times without significant loss of binding capacity.

DEVELOPMENT OF GENETICALLY ENCODED FLUORESCENT PROTEIN CONSTRUCTS OF HYPERTHERMOPHILIC MALTOSE-BINDING PROTEIN

Circularly permuted green fluorescent protein (cGFP) was inserted into the hyperthermophilic maltose binding protein at two different locations. cGFP was inserted between amino acid residues 206 and 207, or fused to the N-terminal of maltose binding protein from Thermotoga maritima. The cloned DNA constructs were expressed in Escherichia coli cells, and purified by metal chelate affinity chromatography. Conformational change upon ligand binding was monitored by the increase in fluorescence intensity. Both of the fusion proteins developed significant fluorescence change at 0.5 mM maltose concentration, whereas their maltose binding affinities and optimum incubation times were different. Fluorescent biosensors based on mesophilic maltose binding proteins have been described in the literature, but there is a growing interest in biosensors based on thermostable proteins. Therefore, the developed protein constructs could be models for thermophilic protein-based fluorescent biosensors.

PH dependence on functional activity of human and mouse flavin-containing monooxygenase 5

Flavin-containing monooxygenase (FMO) 5 belongs to a family of enzymes that catalyze the oxygenation of nucleophilic N- and S-containing compounds. The FMO enzyme family consists of five forms (FMOs1–5) that share about 50–60% sequence identity to each other. A comparison of FMOs showed that the pH-dependence profile for functional activity of FMO5 differed significantly from that of other FMO enzymes. The objective of this study was to examine the pH-dependence of FMO5 to gain insight into the mechanism of action of FMO5. Recombinant mouse and human FMO5 (mFMO5 and hFMO5, respectively) were expressed as maltose-binding fusion proteins from Escherichia coli, purified with affinity chromatography, and examined for their N-oxygenation functional activity at different pH values. hFMO5 showed a broader range and greater functional activity from pH 6 to 11 compared to mFMO5. mFMO5 lost almost all functional activity at pH 6, while hFMO5 maintained almost normal enzyme activity. In order to identify the amino acid residues involved in the effects of pH on hFMO5 and mFMO5 functional enzyme activity, pH-studies in the range of pH 6–9 were done with chimeras of recombinant mouse and human FMO5 and variants of both. Results of these studies and molecular modeling showed that residues responsible for the differences in the pH profile between mFMO5 and hFMO5 were located at positions 227 and 228 of the enzyme. Further variants were made to investigate the role of these amino acids. The results of this study may help to explain the mechanism of FMO function.

Changes in Bond-Orientational Order of Residues are Associated with Shifts in Energy Landscapes

We show that local order, measured not only by the number density distribution around a given node, but also as the geometric preferences of neighbors quantified by bond orientational order (BOO)[1] identifies subtle local structural changes in proteins. We first establish a correspondence between topological and geometrical quantities utilized in protein physics[2]. In the topological case, local parameters are represented as moments of the adjacency matrix. For the geometrical counterpart, local information is encoded in BOO parameters, showing up in series expansion of bond density on a unit sphere. Of special importance, the respective third moments are measures of local compactness; both clustering coefficient C and third-order rotational invariant W use the coupling of three vectors/edges. We then generalize a topological index[3] that measures the propensity of residues to find alternative routes to communicate with function-related destinations. The average number of alternative n-step paths a given residue generates to its neighbors (equal to 2C for two-step paths), normalized by the reachability of that residue by all others in the structure successfully measures the degree of collectivity of motions in a protein. We finally demonstrate the utility of these concepts by showing that W is a good descriptor for identifying local structural changes between the apo and holo forms of ferric-binding and maltose-binding proteins. In both cases, though the holo form resides close to the apo form on the free energy surface as a weakly populated conformation, BOO changes between the states are clearly detectable. Expanding in terms of BOOs, we offer an alternative method for calculating the free-energy change. [1]Steinhardt et al. Physical ReviewB, 28, 784(1983). [2]Atilgan et al. Annual Review of Biophysics, 2012, to appear. [3]Atilgan et al. Biophysical Journal, 99, 933(2010).

Ligand-modulated Parallel Mechanical Unfolding Pathways of Maltose-binding Proteins

Protein folding and unfolding are complex phenomena, and it is accepted that multidomain proteins generally follow multiple pathways. Maltose-binding protein (MBP) is a large (a two-domain, 370-amino acid residue) bacterial periplasmic protein involved in maltose uptake. Despite the large size, it has been shown to exhibit an apparent two-state equilibrium unfolding in bulk experiments. Single-molecule studies can uncover rare events that are masked by averaging in bulk studies. Here, we use single-molecule force spectroscopy to study the mechanical unfolding pathways of MBP and its precursor protein (preMBP) in the presence and absence of ligands. Our results show that MBP exhibits kinetic partitioning on mechanical stretching and unfolds via two parallel pathways: one of them involves a mechanically stable intermediate (path I) whereas the other is devoid of it (path II). The apoMBP unfolds via path I in 62% of the mechanical unfolding events, and the remaining 38% follow path II. In the case of maltose-bound MBP, the protein unfolds via the intermediate in 79% of the cases, the remaining 21% via path II. Similarly, on binding to maltotriose, a ligand whose binding strength with the polyprotein is similar to that of maltose, the occurrence of the intermediate is comparable (82% via path I) with that of maltose. The precursor protein preMBP also shows a similar behavior upon mechanical unfolding. The percentages of molecules unfolding via path I are 53% in the apo form and 68% and 72% upon binding to maltose and maltotriose, respectively, for preMBP. These observations demonstrate that ligand binding can modulate the mechanical unfolding pathways of proteins by a kinetic partitioning mechanism. This could be a general mechanism in the unfolding of other large two-domain ligand-binding proteins of the bacterial periplasmic space.

Crystal Structures of the Bacterial Solute Receptor AcbH Displaying an Exclusive Substrate Preference for β- d-Galactopyranose

Solute receptors (binding proteins) are indispensable components of canonical ATP-binding cassette importers in prokaryotes. Here, we report on the characterization and crystal structures in the closed and open conformations of AcbH, the solute receptor of the putative carbohydrate transporter AcbFG which is encoded in the acarbose (acarviosyl-1,4-maltose) biosynthetic gene cluster from Actinoplanes sp. SE50/110. Binding assays identified AcbH as a high-affinity monosaccharide-binding protein with a dissociation constant ( K d) for β- d-galactopyranose of 9.8 ± 1.0 nM. Neither galactose-containing di- and trisaccharides, such as lactose and raffinose, nor monosaccharides including d-galacturonic acid, l-arabinose, d-xylose and l-rhamnose competed with [ 1 4C]galactose for binding to AcbH. Moreover, AcbH does not bind d-glucose, which is a common property of all but one d-galactose-binding proteins characterized to date. Strikingly, determination of the X-ray structure revealed that AcbH is structurally homologous to maltose-binding proteins rather than to glucose-binding proteins. Two helices are inserted in the substrate-binding pocket, which reduces the cavity size and allows the exclusive binding of monosaccharides, specifically β- d-galactopyranose, in the 4C 1 conformation. Site-directed mutagenesis of three residues from the binding pocket (Arg82, Asp361 and Arg362) that interact with the axially oriented O4-H hydroxyl of the bound galactopyranose and subsequent functional analysis indicated that these residues are crucial for galactose binding. To our knowledge, this is the first report of the tertiary structure of a solute receptor with exclusive affinity for β- d-galactopyranose. The putative role of a galactose import system in the context of acarbose metabolism in Actinoplanes sp. is discussed.

Modification of Poly(ethylene glycol)-Capped Quantum Dots with Nickel Nitrilotriacetic Acid and Self-Assembly with Histidine-Tagged Proteins

We describe the design and preparation of luminescent quantum dots (QDs) modified with terminal nickel-nitrilotriacetic acid (Ni-NTA) groups via simple EDC (N-ethyl-N′-(3-dimethylaminopropyl)carbodiimide hydrochloride) condensation, to form QD-Ni-NTA complexes. The QDs were prepared starting from CdSe-ZnS core−shell QDs surface-capped with carboxy-functionalized poly(ethylene glycol) (PEG) ligands. This modification allowed coupling of a controllable number of oligohistidine-tagged proteins via metal-affinity interactions. In particular, QD-Ni-NTA complexes were coupled to 5×His-tagged maltose binding proteins labeled with Texas red, where effective formation of the QD-MBP-Texas red conjugates was confirmed by agarose gel electrophoresis and fluorescence resonance energy transfer studies. The stability of the QD-MBP conjugates was further tested inside live cells following microinjection directly into the cytoplasm. This design expands on the good colloidal stability afforded by our earlier PEG-based modular ligands which provided QDs with great colloidal stability over a broad range of biologically relevant conditions.

Evidence for a “Wattle and Daub” Model of the Cyst Wall of Entamoeba

The cyst wall of Entamoeba invadens (Ei), a model for the human pathogen Entamoeba histolytica, is composed of fibrils of chitin and three chitin-binding lectins called Jacob, Jessie3, and chitinase. Here we show chitin, which was detected with wheat germ agglutinin, is made in secretory vesicles prior to its deposition on the surface of encysting Ei. Jacob lectins, which have tandemly arrayed chitin-binding domains (CBDs), and chitinase, which has an N-terminal CBD, were each made early during encystation. These results are consistent with their hypothesized roles in cross-linking chitin fibrils (Jacob lectins) and remodeling the cyst wall (chitinase). Jessie3 lectins likely form the mortar or daub of the cyst wall, because 1) Jessie lectins were made late during encystation; 2) the addition to Jessie lectins to the cyst wall correlated with a marked decrease in the permeability of cysts to nucleic acid stains (DAPI) and actin-binding heptapeptide (phalloidin); and 3) recombinant Jessie lectins, expressed as a maltose-binding proteins in the periplasm of Escherichia coli, caused transformed bacteria to agglutinate in suspension and form a hard pellet that did not dissociate after centrifugation. Jessie3 appeared as linear forms and rosettes by negative staining of secreted recombinant proteins. These findings provide evidence for a “wattle and daub” model of the Entamoeba cyst wall, where the wattle or sticks (chitin fibrils likely cross-linked by Jacob lectins) is constructed prior to the addition of the mortar or daub (Jessie3 lectins).