Major Ore Minerals Research Articles

Synthesis of jadarite in the Li2O–Na2O–B2O3–SiO2–NaCl–H2O system: FTIR, Raman, and Li and B K-edge XANES characterizations and theoretical calculations

Abstract. The occurrence of jadarite (LiNaSiB3O7OH) as a major ore mineral in the world-class lithium–boron deposit of the Miocene Jadar lacustrine basin (western Serbia) raises interesting questions about its formation conditions and potential associations for lithium mineralization in other sedimentary basins. This contribution reports on the first successful synthesis of jadarite in the Li2O–Na2O–B2O3–SiO2–NaCl–H2O system at temperatures from 180 to 230 ∘C and pH values from 6 to 12. Synthetic jadarite has been characterized by powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR) spectroscopy, laser Raman spectroscopy, and synchrotron Li and B K-edge X-ray absorption near-edge structure (XANES). First-principles theoretical calculations reproduce the measured FTIR and Raman spectra and allow definitive assignments of vibration modes. Similarly, the measured Li and B K-edge XANES spectra are reasonably reproduced by first-principles theoretical calculations. Our synthesis results, together with its association with searlesite in the Jadar basin, suggest jadarite forms in deep sediments derived from Li-rich alkaline brines under high-temperature diagenetic conditions.

Microthermometric characteristics of Şaphane (Oğuzlar-Çorum) Au mineralisation, Turkey

The study area is located in the Çorum province, in the Central-Inner Black Sea region, North-Central part of Turkey. In the Çorum region various continental blocks are found together. Devecidağ Complex, Artova Ophiolite Complex, Alacahöyük, Bayat, Kızılırmak, Dodurga and Bozkır formations and Dededağ granitoid and quartz veins are exposed in the vicinity of the study area. Extremely altered volcanic rocks, andesite-basalt-trachyte and tuffs are observed near the mineralisation. The silica veins associated with the mineralisation crop out in NE-SW direction southeast of Şaphane village. Pyrite, hematite, limonite and gold are the major ore minerals within the quartz veins.
 In the fluid inclusion studies, it was determined that hydrothermal solutions contain several salts such as NaCl, CaCl2 and MgCl2, the salinity values (wt.% NaCl) changed between 8% and 0.5% in quartz, from 7.4 and 1.4% in calcite, and the temperature of the solutions varied between 161 and 395°C. Available data indicate that the mineralisation in the region is associated with quartz veins and formed under epithermal-mesothermal conditions.

Lateral variations in the Hosen 8‐2 vein in the Hishikari deposit, Japan: Implications for high Au‐grade zone

AbstractLateral sampling of each blasting interval (~ 2.6 m) along a 79 m strike length was conducted for the Hosen 8‐2 vein on the −5 ML (mining level, meters relative to sea level) of the Main ore zone in the Hishikari epithermal Au deposit, Kagoshima, Japan. The horizontal variation of mineral textures, bulk chemical compositions, and fluid inclusion temperatures and apparent salinity of ore fluids were determined. The major gangue minerals of the quartz veins studied include quartz and adularia with minor amounts of calcite and smectite. The major ore minerals include electrum, galena, and sphalerite with minor pyrite, petzite, and hessite. Electrum commonly occurs in a discrete band with microcrystalline quartz, granular adularia, and smectite. The electrum‐bearing band is followed by tabular adularia, and finally by granular or comb quartz. Mineral textures that indicate high degrees of supersaturation with respect to amorphous silica (presently quartz with microcrystalline/mosaic and feathery textures) and adularia (with tabular, rhombic, and granular textures) were common throughout the vein strike. Bulk chemical analyses indicate that Au grade is positively correlated with Ag, Bi, Pb, and Te contents. A bonanza zone with Au grades up to 10,800 ppm occurs in the central part of the Hosen 8‐2 vein on the −5 ML, and is associated with high adularia content, calculated as adularia / (quartz + adularia). The wide lateral variation in the geochemical composition contrasts with the consistent association of electrum with microcrystalline quartz, granular adularia, and smectite throughout the Hosen 8‐2 vein on the −5 ML. Fluid inclusion microthermometry of primary and pseudosecondary inclusions in quartz and adularia yielded histogram modes of homogenization temperature between 160 and 240°C; the most frequent mode is 200–210°C, with most data within ±10°C from this value. The maximum ice‐melting temperature of most samples excluding late comb quartz is −1.5°C, which is equivalent to an apparent salinity of 2.6 wt% NaCl eq. The wide variation in ice‐melting temperatures and apparent salinities (up to 5.2 wt% NaCl eq.) may be due to dissolved CO2 in the fluids, while the sharp decrease in apparent salinity with temperature decrease indicates CO2 loss due to fluid boiling during vein formation. The intimate association of electrum with microcrystalline quartz that recrystallized from amorphous silica indicate sharp boiling and vapor loss as the primary mechanism of Au deposition in the Hosen 8‐2 vein.

SEDIMENTARY MANGANESE DEPOSITS IN CARAJÁS, BRAZIL

The Carajás Mineral Province in Brazil is actually one of the most important in the world because it contains world-class mineral deposits (Fe, Cu, Au, Ni and Mn), partly enriched by lateritic weathering (Fe, Mn, Ni). It carries at least four manganese ore deposits: Azul, Buritirama, Sereno-Conquista and Buriti, of these Azul and Buritirama are productive mines. The Azul deposit is the earliest known and was initially considered as typically lateritic. Further studies show that much of the reserves are classically associated with carbonaceous gray to black mineralized shales and enriched in manganese oxyhydroxides, where cryptomelane is the major ore mineral, enveloped by thick packets of red siltstones and sandstones of lower age Proterozoic (around 2.1 Ga). The mineralogical composition of rocks and ore, isotopic data, abundance of carbonaceous organic matter and the presence of stromatolite structures show deposition in a shallow platform, where the source of manganese and associated metals were mainly of ocean hydrothermal origin, while the sediments of the rocks would have a main continental source from Archean rocks. Rhodochrosite is restricted and diagenetic, likely pyrite. Tectonic deformations reached the whole package and provided environment and structures for remobilization and reprecipitation of Mn-oxyhydroxides of high content and crystallinity. These two types of ores were the source of lateritic ore and colluvionary, already practically depleted

Geology, geochemistry and mineralogy of indium resources at Pitkäranta Mining District, Ladoga Karelia, Russia

This study is aimed at substantiating the prospects of the Pitkäranta Mining District for indium, assessing its resources and elucidating the mineralogical and geochemical features of the distribution of indium in ores. The skarn deposits genetically related to the Salmi anorthosite-rapakivi granite batholith of Early Riphean age were studied. The deposits were divided into two groups, depending on the degree of the greisen alteration of skarns: 1) Sn-Zn-Cu-Fe deposits (the Old Ore Field, Kitelä, Hopunlampi, Heposelkä and Kulismajoki) with little or no greisenization and 2) Be-Sn-Zn deposits with fluorite and magnetite (the New Ore Field, Lupikko, Uksa and Ristiniemi) with well-defined greisenization. Deposits of group 1 are located in the external zone of the Salmi Batholith with a steeply plunging roof (Kitelä), and deposits of group 2 commonly lie above LiF granite domes unexposed by erosion, and are spatially associated with the dykes of these granites and stockscheiders. The distribution of In and associated elements in skarn ores and major ore minerals (sphalerite, chalcopyrite, magnetite and cassiterite) were studied by ICP MS, LA ICP MS and electron probe microanalysis. A total of over 200 samples were analyzed. The results obtained show that In is closely associated geochemically with Zn and Cd, less closely with Cu, Bi and Te is not associated practically with Mo, W, As, Sn and Ag. The content of In in ores from various mines varies from <1 ppm to 0.33 %, and the average In content is 66 ppm. These variations are mainly due to different sphalerite contents in ores and the degree of manifestation of propylitic and greisen alteration of ore-bearing skarns. The main indium-bearing mineral is sphalerite (average In content is 1927 ppm). Other high-In minerals (stannoidite and mawsonite) are uncommon (<0.01 %) and, therefore, do not markedly affect the In balance in ore. The same applies with rare exception to roquesite, the only indium's mineral known here. In-richest (up to 1.5 %) sphalerites with 3–6 % Fe, up to 300–400 ppm Mn and 0.1–0.2 % Co were identified in ore mineral associations of propylitized skarns, which contain no or small amounts of chalcopyrite. Sphalerite-chalcopyrite association is characteristic of roquesite. It occurs mainly in low-tin aposkarn greisens with abundant arsenopyrite-löllingite-sphalerite mineralization. The formation of roquesite seems to have been supported by indium, which was released upon the decomposition of its solid solutions in chalcopyrite and sphalerite and upon the hydrothermal-temperature effect of the late intrusion phases of the Salmi Batholith, LiF granites, on ores. The indium distribution pattern in sphalerite, which is also rich Cd, Ag and Au, shows that roquesite-free propylitized skarns with Sn-Zn-Fe mineralization have the greatest potential for indium and these metals in the zones where the roof of the Salmi Batholith plunges steeply (40–50°) and LiF granites do not occur (Kitelä, Kulismajoki and Hopunlampi deposits). Predicted indium resources in the sphalerite ores of the Pitkäranta Mining District are estimated at 1585–2536 t (as shown by various calculations), cadmium resources at 18424 t, silver resources at 226 t and gold resources at 2 t.

Mneralogy of the Vorontsovskoe gold deposit (Northern Urals)

The Vorontsovskoe gold deposit (Northern Urals) is unique in both Russia and the world because of the diverse and original Tl–Hg–Mn–As–Sb–S mineralization. Based on the available literature and our data, we present a list of 210 minerals found at this deposit. Eight of them are new minerals discovered by the authors: vorontsovite, ferrovorontsovite, tsygankoite, gladkovskyite, luboržákite, pokhodyashinite, gungerite, and auerbakhite. In addition, 41 minerals are found for the frst time in the Russian Federation and 89 minerals are new for the deposit. We defned nine major ore mineral assemblages, including seven ones related to carbonate breccias. They contain more than 70 rare sulfdes, tellurides and sulfosalts, including 31, 12, and 9 minerals with Tl, Hg and Mn, respectively, as species-defning elements. The paper also describes these mineral assemblages and minerals of the Vorontsovskoe deposit. Keywords: Vorontsovskoe deposit, Northern Urals, ore mineral assemblage, carbonate breccia, Tl-Hg-Mn sulfosalt, new mineral, frst fnd in Russia.

Genesis of the Enkafela Mn deposit: a record of submarine hydrothermal activity in the Afar Depression, Northeast Ethiopia

ABSTRACT The genesis of the Enkafela Mn deposit and associated processes were investigated using field mapping, mineralogical and geochemical analyses by XRD, ICP-MS/AES and XRF. The geology is constituted by limestone, evaporites/gypsum, conglomerates and basalt. The orebody is hosted in the limestone and has two distinctive manganese layers: a massive bottom and powdery top. Pyrolusite, romanechite and birnessite are the major ore minerals. The geochemical results indicate elevated MnO (av. 70.25 wt-%), Ba (>10,000 ppm), Sr (>10,000 ppm) and depleted Fe2O3 (av. 0.37 wt-%) and other metals. The massive orebody has higher (172.9 ppm) REE content than the powdery ore (7.84 ppm). Chondrite normalised REE plot shows LREE enrichment for both orebodies. The massive manganese layer shows enrichment in Ce and no Eu anomaly. The powdery manganese is depleted in Ce and Eu. The geochemical and mineralogical studies indicate that the manganese mineralisation has dual sources: hydrogenous and hydrothermal sources (for the massive orebody), and hydrothermal (for the powdery). The data suggest that there was active submarine hydrothermal activity in Dallol associated with the regional geodynamic events while the area was inundated by the Red Sea during the Pleistocene.

On genesis of massive sulfide polymetallic ore deposits of Rudny Altai

Many geologists assign most of large- and medium-sized massive sulfide polymetallic ore deposits of Eastern Kazakhstan to the VMS type. These ore deposits formed in the Devonian, under conditions of rifting and active basalt-andesite-rhyolite volcanism. Ore bodies of these deposits are noted to be clearly confined to formations of several geochronologic levels (D1e to D3fm). Hydrothermal-sedimentary syngenetic and hydrothermal-metasomatic ores are distinguished. High concentrations of base metals in the ores (above 10 % sum metals) and their rather simple mineral composition (chalcopyrite, pyrite, galena, and sphalerite) are a characteristic feature of all the massive sulfide polymetallic ore deposits of Rudny Altai. The ores are noted to be multicomponental, with elevated contents of the admixtures of precious metals and rare elements (Cd, Se, Bi, Te, Ta, W, etc.). Mineralogical investigations of the ores have demonstrated an intricate relationships of the major ore minerals (chalcopyrite, pyrite, sphalerite, galena) that exhibit several generations and different geochemical specialization. Minerals of Au, Ag, Te, Bi, and other elements are encountered as individual grains or microscopic inclusions and stringers in minerals of Cu, Pb, and Zn. A significant vertical range of the ore mineralization (more than 100 m), the complexity and long duration of the ore-forming processes, the clearly defined confinement of the ore mineralization to certain geochronologic levels, – all these allow us to suppose a possibility of discovery of new ore lodes or individual ore deposits within the already known ore fields of the Kazakhstan segment of Rudny Altai

Mineralogy, Fluid Inclusions, and Isotopic Study of the Kargah Cu-Pb Polymetallic Vein-Type Deposit, Kohistan Island Arc, Northern Pakistan: Implication for Ore Genesis

The Kargah Cu-Pb polymetallic deposit is a newly discovered ore deposit from the Gilgit-Baltistan region, located in the Kohistan Island Arc, northern Pakistan. However, this area is poorly researched on the ore genesis, and its origin and the evolution of its magmatic-hydrothermal system remain unclear. Three stages of mineralization were identified, including quartz-pyrite, quartz-sulfide, and carbonate representing early, middle, and late stages, respectively. The major ore minerals are pyrite, chalcopyrite, galena, and zincian tetrahedrite with minor native silver, and native gold mainly distributed in pyrite. Here, we present a systematic study on ore geology, hydrothermal alterations, trace element composition of pyrite, fluid inclusions, and isotopes (S and Pb) characteristics to gain insights into the nature of the ore-forming fluids, types of unknown deposits, and hydrothermal fluid evolution. The high Co/Ni ratio (1.3–16.4) and Co content (average 1201 ppm), the low Mo/Ni ratio (0.43–0.94) and Mo contents (average 108 ppm) of both Py-I and Py-II suggest a mafic source for the mineralization. The Au-Ni plots, Co-As-Ni correlation, and the δ34S values range from −2.8 to 6.4‰ (average of 3.4‰) indicating the affiliation of the mineralization with a mantle-derived magmatic-hydrothermal provenance. The Pb isotope data showing the narrow variations in 206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb values suggest a single lead source from crustal-derived materials. The microthermometry data suggest that the dominant mechanisms are fluid boiling and mixing for mineral precipitation at temperatures ranging between 155 and 555 °C, and represent an intrusion-related magmatic-hydrothermal environment for the Kargah Cu-Pb polymetallic deposit.

Hydrothermal alteration and mineralization of the prospects at the northern flank of the Baimka ore zone, Western Chukotka

Background. Some papers describing the deposits and prospects in the Baimka ore zone (Baimka Trend), the Chukotka Autonomous Region have been recently published. It should be noted that those publications concern with the large Peschanka porphyry copper-molybdenum-gold deposit and Nakhodka ore field. At the same time, some copper prospects were found at the zone flanks and their nature is not clear. There are no data available in the literature that would clarify the mineralogy of hydrothermal alteration and ores at those prospects, including Top and Luchik located at the northern flank. To understand the nature of these prospects, we studied in depth mineralogy of hydrothermal alteration and ores.Aim. This study aims to describe mineralogy of metasomatic rocks and ores from the Top and Luchik prospects in the northern part of the Baimka zone, Western Chukotka.Materials and methods. Several dozen polished thin sections were microscopic studied at the Department of Mineralogy of Moscow State University using an optical microscope. The chemical composition of minerals was determined using electron microprobe at the Laboratory of Analytical Techniques of High Spatial Resolution, Department of Petrology and Volcanology, Moscow State University.Results. It was found that propylitic is the major hydrothermal alteration at the prospects studied here. Metasomatic rocks are cut by mineralized quartz and carbonate-quartz veins. Chalcopyrite and pyrite are the major ore minerals; galena, sphalerite, pyrite enriched in As and Sb, and marcasite are minor; Hg-bearing tetrahedrite-(Zn), native gold with the fineness of ~830, petzite, hessite, and acanthite are rare.Conclusions. The data obtained suggest that mineralization at the Top and Luchik prospect is attributed to the epithermal intermediate sulfidation type. Considering the occurrence of the epithermal mineralization in the upper part of the hydrothermal column and the porphyry mineralization in the Baimka zone, the porphyry mineralization is possible at depth at the Top and Luchik prospects.

Genetic Environments of the Eunjeok Au–Ag Deposit in the Yeongam District: Implications for Cretaceous Epithermal Au–Ag Mineralization in South Korea

Eunjeok Au–Ag deposits are situated in the Yeongam district, Cheollanamdo-province, South Korea. They are genetically related to the Bulgugsa magmatic event (ca. 110–60 Ma), caused by the transition in the subduction direction and style of the Izanagi Plate. Three gold- and silver-bearing hydrothermal veins filled the fractures of the Cretaceous rhyolitic tuff. The major ore minerals were arsenopyrite (31.47–32.20 at.% As), pyrite, chalcopyrite, sphalerite (8.58–10.71 FeS mole%) and galena with minor amounts of electrum (62.77–78.15 at.% Au), native silver, and argentite. Sericitization was dominant in the alteration zone. The various textures of quartz veins (i.e., breccia, crustiform, comb, and vuggy) may indicate the formation of an epithermal environment. The auriferous fluids with the H2O–NaCl system have homogenization temperatures and salinities of 204 °C to 314 °C, less than 10 wt.% equiv. NaCl, and experienced mixing (dilution and cooling) events during mineralization. Considering the characteristics of the geologic setting, major fault system, and host rock, the Eunjeok Au–Ag deposit within the Yeongam district tends to share the general geologic characteristics of Haenam–Jindo epithermal mineralization episodes. However, the age of gold–silver mineralization (86.0 Ma) is older than that of Haenam–Jindo epithermal mineralization episodes (&lt;70.3 Ma), implying some differences exist in the genetic sequence of extensional characteristics caused by transcurrent Gwangju–Yeongdong faults.

Compositional peculiarities of the host rocks and ores of the Lazursky ore field, Zmeinogorsk ore region of the Rudny Altai minerogenic zone

The article describes composition of the host rocks and ores of the Lazursky and Maslyansky polymetallic volcanogenic massive sulfide deposits of the Lazursky ore field located within the Zmeinogorsk ore region of the Rudny Altai minerogenic zone. The ore field is composed of various facies of the Devonian (Late Givetian – Frasnian) ore-bearing siliceous-terrigenous basalt-rhyolite formation containing horizons of synvolcanic metasomatites. All rocks of the ore field were subjected to folding and schistosity with zones of tectonic brecciation. Hydrothermal alterations are represented by carbonatization and chloritization. The ore bodies exposed at the Lazursky and Maslyansky ore deposits are represented by copper-pyrite, copper, and zinc-copper-pyrite massive sulfide ores and other varieties. The major ore minerals of the deposits are chalcopyrite, pyrite, sphalerite, marcasite, and pyrrhotite.

New data on the reduced intrusion-related Au mineralization of Central Kolyma gold region: age, formation conditions, composition, orecontrolling factors

New data are presented on the formation conditions and ages of the reduced intrusion-related Au mineralization of the Vetrenskaya area in the Central Kolyma region. The mineralization is predominantly confined to intersections of Late Jurassic minor intrusive bodies and NE-trending fracture systems and is represented by zones of thin quartz veinlets with sericite-quartz halos. The major ore mineral is gold-bearing arsenopyrite (up to 10%), while minor minerals are represented by lellingite, pyrite, chalcopyrite, and pyrrhotite. Microscopic native gold of a low fineness is paragenetically associated with bismuth minerals (bismuthine, native bismuth, andtellurides of Bi and Au), forming microinclusions (1–10 μ) in the arsenopyrite. Isochronous Re-Os age of the goldbearing arsenopyrite is 137–117 Ma, which suggests the mineralization was formed significantly later than the hosting granitoids (147–153 Ma). The reduced intrusionrelated Au ore deposit was formed at shallower depths in comparison with orogenic Au deposits, and at lower temperatures in comparison with rare metal (W, Mo) ore deposits.

Two types of sediment-hosted Pb-Zn deposits in the northern margin of Lanping basin, SW China: Evidence from sphalerite trace elements, carbonate C-O isotopes and molybdenite Re-Os age

Lanping basin is a large Pb-Zn-Cu-Ag polymetallic mineral province in SW China, with major deposit types including vein-type Cu deposits, basinal brine-related Pb-Zn deposits (e.g., Liziping, Fulongchang) and minor quartz-vein-type Pb-Zn deposits (e.g., Shangnuluo, Baiji). In this study, we have conducted EPMA and LA-ICP-MS sphalerite trace element analyses, together with gangue carbonate C-O stable isotope analysis and molybdenite Re-Os dating. Using these data, we discuss the mineral assemblage, sphalerite minor/trace element composition, ore-fluid source, and mineralization age of these two types of Pb-Zn deposits. Except sphalerite and galena, major ore minerals from Liziping and Fulongchang are As-rich (e.g., gratonite, jordanite, bournonite, As-rich pyrite), whereas those from Shangnuluo and Baiji are Sb-rich (e.g., boulangerite, jamesonite, stibnite, zinkenite). The trace element compositional characteristics in sphalerite of these deposits (low Mn, Fe, Co, In and Sn, and high Cd) mimic those of medium-low-temperature hydrothermal deposits (MVT and Jinding deposits). For the Liziping zoned sphalerite, the dark-brown zones have relatively high Co, Cu, Ga, As, and Sb; whilst the light-colored zones have relatively high Fe, Mn and Cd. The calculated sphalerite formation temperature based on sphalerite geothermometer – GGIMFis (Frenzel et al., 2016) are basically in agreement with those homogenization temperature of inclusions, indicating that the contents of these elements (Ga, Ge, Fe, Mn and In) in sphalerite are mainly controlled by temperature. Moreover, the estimated sulfur fugacity (log fS2) for Liziping (−14.7) and Fulongchang (−13.6) are distinctly lower than those for Shangnuluo (−7.1) and Baiji (−8.5). Carbonate C–O isotope compositions indicate that the dissolved carbon and oxygen of ore forming-fluids of these Pb-Zn deposits were mainly derived from sedimentary carbonate dissolution. Early-ore-stage molybdenite from Baiji deposit yielded two Re-Os weighted average model ages of 21.4 Ma and 12.93 Ma, and a Re-Os concordia age of 11.88 ± 0.77 Ma was obtained from four younger molybdenite samples. These ages are distinctly younger than those reported mineralization age (ca. 30 Ma) for basinal brine-related Pb-Zn deposits. All these results indicate that there are two different types of Pb-Zn metallogenic events in the northern margin of Lanping Basin.

The Mineral Composition of Paleoproterozoic Metamorphosed Massive Sulfide Ores in the Kola Region (A Case Study of the Bragino Ore Occurrence, Southern Pechenga)

Many massive sulfide ore occurrences and deposits in the Kola region are located within the Paleoproterozoic Pechenga–Imandra–Varzuga rift belt (2.5–1.7 Ga). They are hosted by volcanosedimentary complexes of the South Pechenga (Bragino ore occurrence) and western Imandra–Varzuga structural zones (Pirrotinovoe Ushchel’e deposit, Tahtarvumchorr ore occurrence, etc.). The age of the massive sulfide ore was estimated at ca. 1.9 Ga. The ores and their host complexes underwent amphibolite-facies metamorphism, which accounts for their specific mineral composition. The types of ores in the Bragino ore occurrence are discussed, the mineral assemblages are listed, and the major ore minerals, that is, pyrrhotite, pyrite, sphalerite, marcasite, etc., are characterized.

Classification of pyrite types using fractal and stepwise factor analyses in the Chah Zard gold-silver epithermal deposit, Central Iran

The major target of this research is the classification of pyrite types using fractal and stepwise factor analyses in the Chah Zard ore deposit, Central Iran. The ore occurs within a breccia/vein type and the major ore mineral hosting gold mineralization is pyrite. In this study, data were selected using optical, scanning electron microscopy (SEM) and backscattered electron observations as well as laser ablation-inductively coupled plasma–mass spectrometry (LA-ICP–MS) analysis. Conventional interpretations represent four gold-bearing pyrite types of various textures including fractured and porous Py1, oscillatory-rimmed and simple-zoned Py2, colloform Py3 and inclusion-rich Py4. The stepwise factor process was performed on the centred log ratio (clr) transformed data in two phases and Au was grouped with As, Te, Ni and Co in the second factor from the second stage (F2-2). Also, C-N fractal modelling was performed on the As, Au, Te and F2-2 values, all of which demonstrate multifractal nature. Four populations were separated based on F2-2 values and the C-N log–log plot. The main gold mineralization starts from 32 ppm, 2.8%, 7.94 ppm and 1.26 for Au, As, Te concentrations and F2-2, respectively, based on the C-N fractal modelling. These values are correlated with inclusion-rich Py4 and simple-zoned and oscillatory-rimmed Py2. The results obtained in this study show that fractal interpretation of LA-ICP–MS data by stepwise factor analysis may provide a suitable tool for the recognition of ore mineralization in epithermal gold deposits.

A Trace Element Classification Tree for Chalcopyrite from Oktyabrsk Deposit, Norilsk–Talnakh Ore District, Russia: LA-ICPMS Study

The Oktyabrsk PGE-Cu-Ni deposit is one of the largest resources in the Norilsk–Talnakh ore district, Russia, and it is viewed as an ore giant on a global scale. It contains three types of ores: massive, disseminated and veinlet-disseminated. The two former ore types were formed by a liquation process, whereas the latter was associated with fluid-induced selective metasomatic replacement of metamorphosed wall rocks. One of the major ore minerals in all ore types is chalcopyrite. In this study, we determined concentrations of trace elements in this mineral using laser ablation inductively coupled plasma mass spectrometry. It appeared that standard geochemical tools, such as plotting the data in the form of diagrams of normalized concentrations, binary and ternary plots, do not allow one to distinguish chalcopyrite from visually and genetically different ore types. In contrast, more advanced statistical methods such as cluster analysis show different groupings of elements for each ore type. Based on the element clustering, a classification tree was suggested, which allowed for the differentiation of massive, disseminated and veinlet-disseminated ore types of the Oktyabrsk deposit by Se, Te, Cd and Pb concentrations in chalcopyrite with a success rate of 86%. The general feature is that chalcopyrite of veinlet-disseminated ore is poorer in these elements compared to chalcopyrite of the two other ore types. Chalcopyrite of massive ore is poorer in Se and Te when compared to chalcopyrite of disseminated ore.

Genesis of the supergiant Huayangchuan carbonatite-hosted uranium-polymetallic deposit in the Qinling Orogen, Central China

The newly-discovered supergiant Huayangchuan uranium (U)-polymetallic deposit is situated in the Qinling Orogen, Central China. The deposit contains economic endowments of U, Nb, Pb, Se, Sr, Ba and REEs, some of which (e.g., U, Se, and Sr) reaching super-large scale. Pyrochlore, allanite, monazite, barite-celestite and galena are the major ore minerals at Huayangchuan. Uranium is mainly hosted in the primary mineral of pyrochlore, and the mineralization is mainly hosted in or associated with carbonatite dikes.According to the mineral assemblages and crosscutting relationships, the alteration/mineralization at Huayangchuan comprises four stages, i.e., pegmatite REE mineralization (I), main mineralization (II), skarn mineralization (III) and post-ore alteration (IV). Coarse-grained euhedral allanite is the main Stage I REE mineral, and the pegmatite-hosted REE mineralization (ca. 1.8 Ga) occurs mostly in the shallow-level of northwestern Huayangchuan, corresponding to the Paleoproterozoic Xiong'er Group volcanic rocks (1.80–1.75 Ga) in the southern margin of North China Block. Carbonatite-hosted Stage II mineralization contributes to the majority of U-Nb-REE-Ba-Sr resources, and is controlled by the Huayangchuan Fault. Stage II mineralization can be further divided into the sulfate mineralization (barite-celestite) (II-A), alkali-rich U mineralization (aegirine-augite + pyrochlore + uraninite + uranothorite) (II-B) and REE (allanite + monazite + chevkinite)-U (pyrochlore + uraninite) mineralization (II-C) substages. Stage II mineralization may have occurred during the Late Triassic Mianlue Ocean closure. Skarn mineralization contributed to the majority of Pb and minor U-REE (uraninite-allanite) resources at Huayangchuan, and is spatially associated with the Late Cretaceous-Early Jurassic (Yanshanian) Huashan and Laoniushan granites. We suggested that hydrothermal fluids derived from the Laoniushan and Huashan granites may have reacted with the Triassic carbonatites, and formed the Huayangchuan Pb skarn mineralization.The mantle-derived Triassic carbonatites may have been fertilized by the U-rich subducting oceanic sediments, and were further enriched through reacting with the Proterozoic U-REE-rich pegmatite wallrocks at Huayangchuan. Ore-forming elements were likely transported in metal complexes (F−, PO43–, CO32– and SO42–), and deposited with the dilution of the complex concentration. This may have formed the distinct vertical mineralization zoning, i.e., sodic fenite-related alkali-U mineralization at depths and potassic fenite-related REE-U mineralization at shallow level.

Thermal regime reconstruction and fluid inclusion LA–ICP–MS analysis on intermediate-sulfidation epithermal Pb–Zn veins: Implications for porphyry Cu deposits exploration in the Xianhualing District, Anhui, China

The Xianhualing District at Jinzhai in the northern Dabie Orogen, China, is a significant area for Pb–Zn–Cu–Au polymetallic exploration. The main rocks in the area are mica–quartz schist of the Neoproterozoic Foziling Group, and magmatic rocks which are controlled by two sets of faults striking NNE and NW. Recent drilling has revealed that the orebody occurs mainly in mica–quartz schist in the form of breccia and veinlets. Major ore minerals include pyrite, sphalerite, galena, chalcopyrite, magnetite, gold, silver, and silver sulfosalts, with alteration assemblages of predominantly quartz, sericite, calcite, and chlorite. Three types of fluid inclusions occur in quartz–sulfide vein samples collected from eight drill-holes: two-phase liquid-rich inclusions (type I), two-phase vapor-rich inclusions (type Ⅱ), and halite-bearing inclusions (type III). Microthermometric studies of type I and Ⅱ fluid inclusions indicate homogenization temperatures of 161–378 °C and salinities of 0.5–7.8 wt% NaCl equivalent. Fluid inclusion microthermometric data and mineralization and alteration characteristics indicate an intermediate-sulfidation epithermal environment. Current exploration is focused on the location of potential deep porphyry mineralization associated with epithermal mineralization. In this study, 28 drill-core samples from different levels were selected for fluid inclusion microthermometry to elucidate fluid-evolution pathways and hence to determine the likelihood of porphyry bodies. The consistent fluid inclusion petrography, distribution patterns, and fluid-evolution trends indicate that the deeper part of the Dongchong area may have been the regional thermal center of fluid flow. The estimated mineralization depths of type III fluid inclusions are in the range 0.4–1.5 km, indicating a relatively shallow formation. Fluid chemical compositions obtained from single-inclusion laser-ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) analyses support the occurrence of a single magmatic–hydrothermal fluid source, which has a degree of mixing with meteoric water and a small amount of basinal brines during the migration path, and the fluid evolution pattern agrees well with the fluid inclusion mapping result. Quartz-vein hosted fluid inclusions contain significant amounts of Pb, Zn, and Cu, indicating good exploration prospects for porphyry Cu mineralization at depth.

Molybdenum mineralization of Serhiivka Au-Mo deposit (Middle Dnipro, Ukrainian Shield)

The article is devoted to molybdenum mineralization of the Eastern flank of Au-Mo Serhiivka deposit, located in the Middle Dnipro megablock of the Ukrainian Shield (USh). The generalized description of mineralization is performed on such important questions: discovery and exploration history, structure and composition of the host rocks, metamorphic and metasomatic alteration of rocks, structural position and localization conditions of molybdenum mineralization, ore composition, description of major ore minerals, morphology of mineralization and the most widespread views about its genesis. Molybdenum ores were discovered and named East-Serhiivka occurrence for the first time in 1974, before the discovery of gold mineralization, which occurred in 1985.&#x0D; Serhiivka deposit consists of two Mesoarchaean volcanic-plutonic associations (VPA) of different composition: the early mafic and the late felsic. The Eastern flank of the deposit, where the molybdenum mineralization is concentrated, is a structural knot similar to the lying letter “T”. It is formed by complex joint of the sub-latitudinal Serhiivka and sub-meridional Solone subvolcanic bodies and the East-Serhiivka massif of plagiogranitoids of the late VPA, which intrude basic rocks of early VPA. Molybdenum mineralization is localized in linearly elongated zones with a chaotic network of thin quartz, carbonate-quartz veinlets and poor (2–5 %) sulfide impregnation, including molybdenite. About 20 vein-impregnated ore zones have been recovered with up to 100–150 m thickness and 0,01 to 0,3 %, sometimes more than 1 % average molybdenum grade. The ores are subdivided into two major mineral types: 1) quartz-molybdenite; 2) quartz-sulfide-gold-molybdenite. The main components of ores molybdenite and native gold are associated with pyrite, chalcopyrite, magnetite, occasionally – pyrrhotite, arsenopyrite, scheelite, bismuth telluride, silver and others. Typical non-metallic minerals are quartz, carbonate, feldspar, chlorite, amphibole, biotite, sericite. It is supposed hydrothermal-metamorphogenic genesis of molybdenum (and gold) ores. Molybdenite and gold are rarely detected in the same intersections, which indicates separate genesis of these minerals. According to the accepted classification molybdenum mineralization is systemized as linear stockwork.&#x0D; Molybdenum ores of Serhiivka deposit are mostly considered as independent, separate from gold mineralization, potentially workable mine. It is the most prospective one in the Middle Dnipro region, USh and Ukraine in general. We suggest a comprehensive approach to studying, resource and reserves evaluation of Serhiivka deposit, taking into account the potential of both molybdenum and gold mineralization, as well as concentrations of rhenium and osmium in molybdenite. Geological exploration on the base of this approach will increase investment prospects of Serhiivka gold-molybdenum deposit.