In this study, a novel material, iron sulfide modified by sodium carboxymethyl cellulose (FeS-CMC), was successfully synthetized for peroxydisulfate (PDS) activation to remove bisphenol A (BPA). Characterization results showed that FeS-CMC had more attachment sites for PDS activation due to its higher specific surface area. A stronger negative potential contributed to preventing nanoparticles from reuniting in the reaction and improving the interparticle electrostatic interactions of the materials. Fourier transform infrared spectrometer (FTIR) analysis of FeS-CMC suggested that the coordination of the ligand for combining sodium carboxymethyl cellulose (CMC) with FeS was monodentate. A total of 98.4% BPA was decomposed by the FeS-CMC/PDS system after 20 min under optimized conditions (pH = 3.60, [FeS-CMC] = 0.05 g/L and [PDS] = 0.88 mM). The isoelectric point (pHpzc) of FeS-CMC is 5.20, and FeS-CMC contributed to reducing BPA under acidic conditions but showed a negative effect under basic conditions. The presence of HCO3−, NO3− and HA inhibited BPA degradation by FeS-CMC/PDS, while excess Cl− accelerated the reaction. FeS-CMC exhibited excellent performance in oxidation resistance with a final removal degree of 95.0%, while FeS was only 20.0%. Furthermore, FeS-CMC showed excellent reusability and still reached 90.2% after triple reusability experiments. The study confirmed that the homogeneous reaction was the primary part of the system. Surface-bound Fe(II) and S (-II) were found to be the major electron donors during activation, and the reduction of S (-II) contributed to the cycle of Fe(III)/Fe(II). Sulfate radicals (SO4•−), hydroxyl radicals (•OH), superoxide radicals (O2•−) and singlet oxygen (1O2) were produced at the surface of FeS-CMC and accelerated the decomposition of BPA. This study offered a theoretical basis for improving the oxidation resistance and reusability of iron-based materials in the presence of advanced oxidation processes.
Read full abstract