Major Acetabular Defects Research Articles

Reconstruction of severe acetabular defects (Paprosky type III A) in total hip arthroplasty using modular tantalum augments in combination with a cemented cup

PurposeAcetabular defect reconstruction can be a complex and challenging surgical procedure, with stable long-term fixation of the implants remaining the ultimate goal. The purpose of this study was (1) to evaluate the radiological and clinical outcome of complex acetabular reconstruction surgery with the use of modular tantalum TM augments in combination with cemented revision cups; (2) to investigate blood tantalum concentrations in these patients; and (3) to report complications and mechanisms of failure related to this procedure at mid-term follow-up (mean 4.5 years).MethodsWe retrospectively reviewed 29 patients (29 hips) with severe acetabular bone loss (Paprosky type III A) reconstructed using a modular tantalum TM augment in combination with a cemented cup. We evaluated the implant survival and the radiological and clinical outcomes after a mean follow-up of 4.5 years (SD 2.2; range 8.4 – 2.1 years) using patient reported outcome scores (PROMs). Blood samples were analysed regarding tantalum concentration and compared with a control group.ResultsThe cumulative survival rate at 4.5 years with the endpoint “revision of the acetabular component for any reason” was 96.2% (95% Confidence Interval 75.7–99.5). The PROMs improved significantly up to the latest follow-up, and radiographic data showed only one patient with signs of initial implant migration with a broken screw and a change of the position of the augment and the cup. Mean blood tantalum concentrations were significantly higher in the study group (0.16 µg/L) compared to the control group (0.002 µg/L) (P < 0.001).ConclusionsThis study has demonstrated good mid-term (mean 4.5 years) clinical and radiological outcomes of modular tantalum TM augments in combination with a cemented cup for the reconstruction of major acetabular defects. Mean blood tantalum concentrations were increased in patients with stable tantalum implants compared to healthy controls.

Highly Porous Acetabular Cup and Augment Constructs in Complex Revision Total Hip Arthroplasty: What Predicts 10-Year Implant Survivorship?

BackgroundPorous tantalum acetabular cup and augment constructs have demonstrated favorable outcomes up to 5 years postsurgery despite severe bone loss during revision total hip arthroplasty (THA). Prior literature lacks long-term studies with substantial case numbers. This study aims to assess long-term clinical and radiographic outcomes 10 years postsurgery in patients undergoing revision THA with porous tantalum acetabular cup-augment constructs and determine factors associated with long-term survivorship. MethodsBetween 2000 and 2012, 157 revision THAs were performed in cases with major acetabular defects (mainly Paprosky type IIIA and IIIB) utilizing porous tantalum cup-augment constructs. Pelvic discontinuity was noted intraoperatively in 17 hips (11%). Postoperative radiographs were evaluated at regular intervals for implant stability and radiolucent lines. There were 49 patients who had complete radiographic follow-up at 10 years or longer postsurgery. ResultsThe 10-year survivorship free of revision of the cup-augment construct for aseptic loosening was 93%, free of any acetabular construct revision was 91%, free of any hip rerevision was 77%, and free of any reoperation was 75%. Pelvic discontinuity was associated with increased risk of reoperation (hazard ratio [HR] = 2.8), any hip rerevision (HR = 3.2), any cup-augment construct revision (HR = 11.8), and aseptic construct revision (HR = 10.0). Of unrevised cases with radiographs at 10 years, 4 hips showed radiographic loosening. Mean Harris hip scores improved from 47 preoperatively to 79 at 10 years. ConclusionsPorous tantalum acetabular cup-augment constructs used in revision THA with severe acetabular bone loss provide excellent implant survivorship at 10 years when the acetabulum is intact. Due to lower survivorship of cup-augment constructs in cases of pelvic discontinuity, additional construct fixation or stabilization methods are recommended, when a discontinuity is present. Level of EvidenceIV

Acetabular Distraction Technique: A Multicenter Study With a Minimum 2-Year Radiographic Follow-Up

BackgroundChronic pelvic discontinuity is a challenge during revision total hip arthroplasty due to the loss of structural continuity of the superior and inferior aspects of the acetabulum from severe acetabular bone loss. Acetabular distraction provides an alternative surgical treatment by stabilizing the acetabular component through elastic recoil of the pelvis, which may be supplemented with modular porous augments for addressing major acetabular defects. This study reports 2-year radiographic findings following acetabular distraction for the treatment of chronic pelvic discontinuity. MethodsPatients undergoing acetabular distraction performed by 5 surgeons from 2002 to 2021 were identified across 5 institutions. Demographic, surgical, and postoperative outcomes, including radiographic component stability, were recorded. There were 53 of 91 (58.2%) patients (5 deceased, 33 lost to follow-up) consisting of 4 Paprosky IIC (7.5%), 8 Paprosky IIIA (15.1%), and 41 Paprosky IIIB (77.4%) defects included, with a mean follow-up time of 4.8 years (range, 2 to 13.5). Modular porous augments were used in 33 (62.3%) cases. Failure was defined as a subsequent revision of the acetabular construct. ResultsAmong the 13 (24.5%) patients who returned to the operating room, 6 (46.2%) had a prior history of revision total hip arthroplasty before undergoing acetabular distraction. Only 5 (9.4%) patients underwent acetabular revision following acetabular distraction, leading to an overall cup survivorship of 90.6%. Of the remaining 48 patients, 46 (95.8%) had evidence of radiographic bridging callus of the chronic pelvic discontinuity at their last clinical follow-up. ConclusionsTo our knowledge, in the largest series to date, acetabular distraction has proven to be a viable treatment for acetabular bone loss with a chronic pelvic discontinuity, with excellent early survivorship and radiographic evidence of bridging callus. Future studies with longer follow-ups are needed to further monitor the efficacy of this technique. Level of EvidenceLevel III, Retrospective Comparative Study.

CUP-CAGE RECONSTRUCTION FOR MAJOR ACETABULAR DEFECTS: TEN-YEAR UPDATE OF FULL AND HALF CAGE CONSTRUCTS

Cup-cage constructs are one of several methods commonly used to treat severe acetabular bone loss during contemporary revision total hip arthroplasty. The purpose of this study was to provide a long-term results of the technique with emphasis on implant survivorship, radiographic results, and clinical outcomes for both full and half cup-cage reconstructions.We identified 57 patients treated with a cup-cage reconstruction for major acetabular bone loss between 2002–2012. All patients had Paprosky Type 2B through 3B bone loss, with 60% having an associated pelvic discontinuity. Thirty-one patients received a full cup-cage construct, and 26 a half cup-cage. Mean age at reconstruction was 66 years, 75% were female, and the mean BMI was 27 kg/m2. Mean follow-up was 10 years.The 10-year cumulative incidences of any revision were 14% and 12% for the full and half cup-cage construct groups, respectively. Of the 9 revisions, 3 were for dislocation, 2 for aseptic loosening and construct failure (both were pelvic discontinuities), 1 for adverse local tissue reaction, and 1 for infection with persistent pelvic discontinuity. The 10-year cumulative incidences of revision for aseptic loosening were 4.5% and 5% for the full and half cup-cage constructs, respectively. Of the unrevised cases, incomplete and non-progressive zone 3 radiolucent lines were observed in 10% of patients in each group. Three patients experienced partial motor and sensory sciatic nerve palsies (2 in the full and 1 in the half cup-cage group). Both the full and half cup-cage cohorts demonstrated significantly improved Harris hip scores.Full and half cup-cage reconstructions for major acetabular defects were successful at 10 years in regards to acetabular fixation without appreciable differences between the two techniques. However, zone 3 radiolucent lines were not uncommon in association with discontinuities, and dislocation continues to be a problem.

Major acetabular defects: outcomes of first revision total hip arthroplasty using Kerboull cross-plate with allograft and cemented dual mobility cup at a maximum follow-up of fourteen years.

The use of dual mobility cups (DMC) has been shown to reduce hip instability after revision surgery. For severe acetabular bone loss, reconstruction with a Kerboull cross-plate and bone allograft would contribute to restoring native hip position and bone stock. Only two papers reported on the combination of Kerboull cross-plate with bone allograft and cemented DMC in revision total hip arthroplasty (THA). This is a monocentric retrospective study (28 cases) of first-time revision THA using such a construct in American Association of Orthopaedic Surgeons (AAOS) grade III and IV acetabular bone defect. Detailed demographic, clinical and radiographic results were recorded and evaluated. With a mean follow-up of six ± 3.63years, no case of instability was reported. The modified Harris Hip Score (mHHS) was 88.4 ± 10.1. No hook fracture or mechanical failure was observed. Non-progressive radiolucent lines were recorded. Osteointegration of the allografts was observed in all cases with a mean Grodet score of 7.9 ± 0.97. In first revision THA, the use of a Kerboull cross-plate with allograft and a cemented DMC in AAOS grade III and IV acetabular bone defects demonstrated excellent clinical and radiological outcomes with no recorded cases of dislocation or mechanical failure.

Porous tantalum shell and augment for acetabular defect reconstruction in revision total hip arthroplasty: a mid-term follow-up study.

The use of porous tantalum trabecular metal (TM) shell and augment to reconstruct acetabular defects in revision total hip arthroplasty (THA) is a reliable technique. We evaluated the mid-term implant survival, clinical, and radiological outcomes of our first 48 revisions using this technique. A total of 45 patients (48 hips) who had acetabular revision of THA between 2011 and 2017 using TM shell and augment with possible mid-term follow-up were included. Twenty-two patients were men (49%) and 23 were women (51%), mean age was 62.5years (34 to 85) and mean follow-up was 75months (54 to 125). Twenty-four hips (50%) had a Paprosky IIIA defect, 14 (29.2%) had a type IIIB defect, six (12.5%) had a type IIC defect, and four hips (8.3%) had a type IIB defect. None of the patients had pelvic discontinuity (PD). At a mean 6.25years follow-up, all hips remained well-fixed and implant survival of 100% with the need of re-revision as the end point. Screw fixation was used for all shells; augments and the shell-augment interface was cemented. Excellent pain relief (mean WOMAC score pain 90.5, (38.3 to 100)), and functional outcomes (mean WOMAC function 88.3 (31.9 to 100), mean OHS 89.2 (31.8 to 100)) were noted. Patient satisfaction scores were excellent. This study demonstrated satisfactory mid-term clinical and radiological outcomes of using TM shell and augment for reconstructing major acetabular defects without PD in revision THA.

Dislocation rates with combinations of anti-protrusio cages and dual mobility cups in revision cases: Are we safe?

BackgroundDue to the increasing numbers of revision total hip arthroplasty (THA) procedures being carried out, the frequency of major acetabular defects is also rising. A combination of an anti-protrusio cage and a dual mobility cup has been used in our department since 2007 in order to reduce the dislocation rate associated with complex defects. Although both implants have an important place in endoprosthetics, there are as yet limited data on the dislocation and complication rates with this combination.MethodsThis retrospective study included all patients in whom a Burch–Schneider cage and a dual mobility cup were implanted in our department between 2007 and 2014 and who had a minimum follow-up period of 24 months.ResultsThe study included 79 patients with a mean follow-up period of 5.3 years. The implant survival rate was 85% at 65 months. Postoperative dislocation occurred in two cases (2.1%), with the first dislocation taking place within the first 3 weeks in both of these patients.ConclusionsThe present study shows a promising dislocation rate with a combination of an anti-protrusio cage and a dual mobility cup. Particularly in the medium-term follow-up, no further dislocations occurred in the study. A maximum cup inclination of 45° in revision cases was associated with a lower dislocation rate in this group of patients.

Cementless jumbo cups for revision of failed Furlong prosthesis. A case series

BackgroundRevision of failed total hip arthroplasty (THA) presents great challenge to any orthopaedic surgeon especially in the presence of acetabular defects where the main goal is to achieve durable fixation of prosthetic components to bone which is the key to successful revision surgery. MethodsSeventeen patients (17 hips) with mean age of 52 (40–61) years had revision surgery for aseptic failure of Furlong hydroxyapatite-ceramic-coated (HAC) prosthesis using cementless jumbo cups. Patients were reviewed clinically and radiographically with mean follow-up of 3.5 years (2–6). No patient was lost to follow up. ResultsAll revised acetabular components showed polyethylene wear, severe metallosis, with acetabular defects IIB (4/17), and IIIA (13/17) according to Paprosky classification. The femoral component was well fixed in all cases but one patient had stem revision for femoral fracture mal-union. There was one early post-operative infection; there was no postoperative dislocation, sciatic nerve injury, periprosthetic fracture or deep venous thrombosis. At last follow-up, no progressive radiolucencies or acetabular migration was identified. The mean Harris hip score improved from 42 (24–59) pre-operatively to 85 (72–92). ConclusionGood clinical results and radiographic stability were obtained at short term follow up after acetabular revision using cementless jumbo cups, which justify its use in revision surgery even in the face of major acetabular defects. Furlong HAC femoral component gives excellent long-term survival in young and active patients with a survival rate of 94% at 18.6 years.

The Evolution of the Cup-Cage Technique for Major Acetabular Defects: Full and Half Cup-Cage Reconstruction.

Complex acetabular reconstruction for major bone loss can require advanced methods such as the use of a cup-cage construct. The purpose of this study was to review outcomes after the initial development of the cup-cage technique and the subsequent evolution to the use of a half cup-cage construct. We performed a retrospective, single-center review of 57 patients treated with cup-cage reconstruction for major acetabular bone loss. All patients had major acetabular defects graded as Paprosky Type 2B through 3B, with 34 (60%) having an associated pelvic discontinuity. Thirty patients received a full cup-cage construct and 27, a half cup-cage construct. The mean follow-up was 5 years. Both the full and half cup-cage cohorts demonstrated significantly improved Harris hip score (HHS) values, from 36 to 72 at a minimum of 2 years of follow-up (p < 0.05). Early construct migration occurred in 4 patients, with stabilization prior to 2-year follow-up in all but 1 patient. Incomplete, zone-3, nonprogressive acetabular radiolucencies were observed in 2 (7%) of the full cup-cage constructs and 6 (22%) of the half cup-cage constructs. One patient with a full cup-cage construct underwent re-revision of the acetabular component for progressive migration and aseptic loosening. Short-term survivorship free from re-revision for any cause or reoperation was 89% (83% and 96% for full and half cup-cage cohorts, respectively). Both full and half cup-cage constructs demonstrated successful clinical outcomes and survivorship in the treatment of major acetabular defects and pelvic discontinuity. Each method is utilized on the basis of individual intraoperative findings, including the extent and pattern of bone loss, the quality and location of host bone remaining after preparation, and the presence of pelvic discontinuity. Longer-term follow-up is required to understand the durability of these constructs in treating major acetabular defects and pelvic discontinuity. Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

A 2- to 7-Year Follow-Up of a Modular Iliac Screw Cup in Major Acetabular Defects: Clinical, Radiographic and Survivorship Analysis With Comparison to the Literature

BackgroundInadequate acetabular bone stock is a major issue in total hip arthroplasty, and several treatment options are available. Stemmed cups have been used in this scenario with variable results. A novel modular polyaxial uncemented iliac screw cup (HERM-BS–Sansone cup—Citieffe s.r.l., Calderara di Reno, Bologna, Italy) has been recently introduced to overcome the drawbacks of stemmed cups. In this retrospective study, we report the results of this cup in patients with large acetabular bone defects at 2- to 7-year follow-up. MethodsWe evaluated a consecutive series of 121 hips (118 revisions and 3 complex primary arthroplasties) treated with this novel cup at a mean follow-up of 46 months. Kaplan–Meier survival analysis was performed with implant revision for any reason as a primary end point. Further survival analysis was performed excluding septic failures. Clinical outcome was assessed with the Harris Hip Score. ResultsThere had been 7 reoperations: 1 for aseptic loosening, 5 for deep infection, and 1 for recurrent dislocation. In 5 cases, the cup was removed; estimated survival rate at 5-year follow-up with implant removal for any reason was 95.6% (95% confidence interval = 91-99), and 98.3% (95% CI = 96-100) excluding those failed for infection. Mean Harris Hip Score at latest follow-up was 77 points (range, 44-95; standard deviation = 11.9). ConclusionThe present findings show the short-term efficacy of the iliac screw cup with respect to implant survival. A longer follow-up and a larger number of patients are necessary to confirm the encouraging preliminary results.

Review of the outcomes of complex acetabular reconstructions using a stemmed acetabular pedestal component.

Until now, there has been no consensus as to whether stemmed acetabular components are appropriate for use in patients undergoing revision total hip arthroplasty (THA) who have major acetabular defects or pelvic discontinuity. We wished to address this deficiency in the literature. We carried out a retrospective study of 35 patients (six men and 29 women) with a mean age of 68 years (37 to 87), with major acetabular defects who underwent revision THA between 2000 and 2012. At a mean follow-up of 63 months (24 to 141), a total of 15 patients (43%) had required at least one further operation. Six implants (17%) loosened aseptically, four (11%) were further revised for infection and two (6%) for technical failure. By taking revision for any reason as the endpoint, the rate of survival of the implant was 61% after five years; by taking revision for aseptic loosening as the end point, it was 78%. The cumulative five-year survival for aseptic loosening was 94% in patients without pelvic discontinuity, and 56% in those with pelvic discontinuity. These results indicate a significantly worse survival in patients with pelvic discontinuity (p=0.020) and we advise caution in the use of the pedestal component in patients with major acetabular defects and pelvic discontinuity who require revision THA. As a result of these findings we have stopped using this implant and prefer to use particulate bone grafts protected with an anti-protrusion cage and posterior column plate fixation, if necessary. Based on these poor results, we advise caution if using the pedestal component in patients with major acetabular defects with the presence of a pelvic discontinuity. Cite this article: Bone Joint J 2016;98-B:772-9.

Massive Acetabular Bone Loss: The Cup-Cage Solution

Treatment of massive contained acetabular defects is challenging. The current generation of reconstruction cages in combination with either morcellized or structural allograft bone has given promising results. However, a significant proportion will fail due to lack of biological fixation of the cage, resulting in fatigue fracture. This study examines the early results of a new technique of combining a cage with a shell of Trabecular Metal (Zimmer, Warsaw, IN), because this material has the potential to enhance biological fixation. Fourteen patients with major acetabular defects underwent revision total hip arthroplasty with a Cup-Cage construct. Clinical and radiographic outcomes were determined at minimum 2-year follow-up. Complications, reoperations, and functional status (overall satisfaction, pain, limp, and use of gait-aids) were assessed. Radiographs were analyzed for evidence of implant migration, new radiolucent lines, and bone graft resorption. Mean follow-up was 27 months (range: 1-39), excluding 1 death in less than 1 year after surgery. Outcomes were 82% excellent or good, 12% fair, and 6% poor. Average pre- and postoperative Western Ontario MacMaster scores were 64 and 33 points, respectively. Oxford hip scores were an average of 45 preoperative and 28 postoperative. Short-form-36 averaged 351 preoperative and 601 postoperative. Radiographically, all the implants were stable and none had migrated.

Impaction Grafting Using a Cemented Porous-Coated Modular Acetabular Component

Reconstruction of major acetabular defects continues to challenge surgeons. There are many surgical options for these situations, including oversized hemispherical cups, oblong cups, acetabular cages, bulk allografts, and impaction allografting. We present the case of a modification to the impaction grafting technique for acetabular reconstruction. In our case, a porous-coated modular titanium acetabular component was cemented in place instead of an all-polyethylene acetabular component, which is the standard technique for impaction grafting reconstruction. The use of the modular component allowed a greater number of surgical options at the time of surgery. At 5 years from surgery, the patient has a successful reconstruction and the radiographs continue to look excellent.