Main Pollution Sources Research Articles

The application of electroflocculation (EC) technology in printing and dyeing wastewater

Abstract. Industrial wastewater contains a large number of toxic pollutants, and the total consumption of dyes in the global textile printing and dyeing industry exceeds 587,000 tons per year. Duo to the process of dye production is more complex, the application of processes and materials are more, so many production links will produce a variety of waste, garbage, and the relevant waste dye into the river, lake and sea is up to millions of kilograms. It can be seen that textile printing and dyeing wastewater is the main source of water environmental pollution. If not treated in time, it will not only affect the production efficiency, but also harm the surrounding ecological environment and pose a serious threat to human survival. Scientific and effective intervention of textile industry wastewater and reasonable selection of textile industry wastewater intervention mode are related to the sustainable development of the industry. In recent years, electroflocculation (EC) technology has gradually become a research hotspot due to its advantages of high removal rate, simple operation, small dosage of chemicals, and small impact on the environment, including the intervention of wastewater. This paper will describe the main mechanism of EC and the application status of EC technology is discussed in detail, the limitations and future development trend of this technology are also proposed.

Implementation Status and Suggestions of “Coal-to-gas” Policy in Beijing-Tianjin-Hebei Region of China

With the acceleration of industrialization for the past few years, the level of air pollution has also increased significantly. The Beijing-Tianjin-Hebei region is one of the regions that need to be improved urgently. The air pollutants produced by coal burning are the main source of pollution in this region, so it is of great practical necessity for the Beijing-Tianjin-Hebei region to replace coal burning with clean energy. At present, the status of the "coal-to-gas" policy of the Beijing-Tianjin-Hebei region has achieved remarkable results. With the strong support of the government, air pollution has been effectively improved. However, there are still many problems such as "one-size-fits-all" policy, imperfect financial subsidy mechanism, tight gas source, differentiated scope of policy implementation, and hidden dangers of rural equipment safety. For these reasons, the government should formulate differentiated policies according to local conditions, implement "coal-to-gas" and "coal-to-electricity" synchronously, improve the subsidy mechanism, strengthen technical and equipment support, enhance gas supply security, stabilize gas price and strengthen publicity and training.

Characteristics of pollutants emitted by motor vehicles and their impact on the environment and engine operation

Gaseous and solid pollutants (dusts) of atmospheric air have been defined. Dusts have been divided according to various criteria and their properties have been given. The sources and characteristics of anthropogenic and natural pollutants of atmospheric air have been presented. It has been shown that the main sources of anthropogenic pollutants, apart from industry, are motorization, and internal combustion engines of cars are a source of gaseous pollutants and solid particles, the emission of which has been significantly reduced. The originality of the article consists in conducting an extensive literature analysis and proving that the emission of "non-engine" pollutants in the form of dust from the wear of friction linings of brakes, clutches and from the wear of tires and roads, as well as mineral dust raised from the ground, is currently a greater threat to human health and the environment than engine emissions. The impact of particulate matter emissions from road transport and mineral dust, which is the basic component of road dust, on human health, vegetation and on the operation of engine and vehicle systems is presented.

Shallow Groundwater Quality Assessment and Pollution Source Apportionment: Case Study in Wujiang District, Suzhou City

Groundwater serves as a crucial resource, with its quality significantly impacted by both natural and human-induced factors. In the highly industrialized and urbanized Yangtze River Delta region, the sources of pollutants in shallow groundwater are more complex, making the identification of groundwater pollution sources a challenging task. In this study, 117 wells in Wujiang District of Suzhou City were sampled, and 16 groundwater quality parameters were analyzed. The fuzzy synthetic evaluation method was used to assess the current status of groundwater pollution in the study area; the principal component analysis (PCA) was employed to discern the anthropogenic and natural variables that influence the quality of shallow groundwater; and the absolute principal component scores–multiple linear regression (APCS-MLR) model was applied to quantify the contributions of various origins toward the selected groundwater quality parameters. The results indicate that the main exceeding indicators of groundwater in Wujiang District are I (28%), NH4-N (18%), and Mn (14%); overall, the groundwater quality is relatively good in the region, with localized heavy pollution: class IV and class V water are mainly concentrated in the southwest of Lili Town, the north of Songling Town, and the south of Qidu Town. Through PCA, five factors contributing to the hydrochemical characteristics of groundwater in Wujiang District were identified: water–rock interaction, surface water–groundwater interaction, sewage discharge from the textile industry, urban domestic sewage discharge, and agricultural non-point source pollution. Additionally, the APCS-MLR model determined that the contributions of the three main pollution sources to groundwater contamination are in the following order: sewage discharge from the textile industry (10.63%) > urban domestic sewage discharge (8.69%) > agricultural non-point source pollution (6.26%).

The source of volatile organic compounds pollution and its effect on ozone in high-altitude areas

Volatile organic compounds (VOCs) are crucial precursors in the formation of ozone (O3). The sources of pollution are complex and significantly impact O3 generation. Long-term exposure to high-concentration O3 environments causes serious damage to organisms. High-altitude areas experience continuous high temperatures and strong solar radiation, which can easily produce O3 through photochemical reactions, making these areas prone to frequent air pollution. This study utilizes the National Positioning Station of the Yinchuan Urban Ecosystem in Ningxia to conduct field synchronous observations, gathering data on VOCs, meteorological variables, and O3. By employing machine learning algorithms, we examined the seasonal distribution characteristics of VOCs, their pollution sources, and their impact on O3. The results show that the seasonal distribution of VOCs areas is low in spring and autumn and high in summer and winter. The components with higher volume fraction contribution are m-tolualdehyde in spring and summer, ethane in autumn, and acetylene in winter. The main emission sources of VOCs pollution are hydrocarbon volatile emission in spring and winter, solvent volatilization emission in summer, and industrial sources in autumn. VOCs have a negative effect on O3, with a greater impact in winter and spring, evidenced by standardized effect values of −0.26 and −0.24. The key components affecting O3 in VOCs vary by season. Aromatic hydrocarbons are the key components in spring and winter, with contribution rates of 22 % and 21.3 %. Alkenes are the key components in summer and autumn (24.5 % and 26.8 %). Among meteorological variables, temperature is the key factor affecting O3, while wind speed is the key factor affecting O3 only in winter. This study aims to clarify the sources of VOCs pollution in different seasons and their impact on O3, providing a theoretical basis and technical support for the prevention and control of VOCs and O3 pollution in high-altitude areas.

Microplastic fate in Arctic coastal waters: accumulation hotspots and role of rivers in Svalbard

Little is known about the role of remote and sparsely populated Arctic coastal zones in the microplastic cycle. Distribution of microplastics was studied in the Svalbard fjords in June – July 2022 with the main goal of assessing rivers’ role in the fate of microplastic in Arctic coastal waters. Surface microplastics (0 – 20 cm depth, 500 – 5000 µm size) were sampled with a neuston net in triplicate per study site in parallel with sampling of subsurface microplastics with a pump system (1.5 m depth, 100 – 5000 µm size). The central part of Isfjorden and its several branches covering populated and unpopulated fjords were studied; the sampling was conducted during an intense riverine discharge in all studied sites. Maximum abundance of surface microplastics (71,400 items/km2 or 0.19 iterms/m3, 0.19 mg/m3) was found along the river plume border in the middle of populated Adventfjorden indicating importance of both local sources and surface hydrodynamics in the formation of microplastics accumulation hotspots. All other unpopulated fjords were free of the floating on the sea surface microplastics as river discharge prevented transport of microplastics inside the fjords. The highest concentration of subsurface microplastics was found in the central part of Isfjorden and the lowest – in river plume waters, which also indicates the removal of microplastics from the inner part of fjords during an intensive river discharge. Our results may suggest that Arctic rivers flowing through unpopulated areas bring clean water and thereby reduce level of microplastic pollution in the coastal waters. In contrast to the rest of the world’s ocean, rivers are not the main source of microplastic pollution in the Arctic Ocean.

Moss Technique Used to Monitor the Atmospheric Deposition of Trace Elements on the Territory of the Ryazan Region, Russia

Instrumental neutron activation analysis in combination with the method of moss biomonitoring for the assessment of atmospheric deposition of heavy metals and other elements was applied for the first time in the Ryazan Region in Russia. Concentrations of 42 macro, micro and trace elements in 63 moss samples (Hylocomium splendens and Pleurozium schreberi, as well as Hypnum cupressiforme, Sciuro-hypnum sp., Plagiothecium sp. and Ptilium sp.), collected on a relatively uniform grid in the study area, were determined. On the basis of analytical results using GIS technologies, maps of the spatial distribution of heavy metals and other toxic elements were constructed for the Ryazan region. The method of multivariate statistical analysis (factor analysis) was used to identify the main sources of pollution—large industrial facilities located in this region. The obtained results were included in the Atlas of Atmospheric Deposition of Heavy Metals, which is published by the UN Commission on Long-Range Transboundary Air Pollution (UNECE ICP Vegetation).

Sources Affecting Microplastic Contamination in Mountain Lakes in Tatra National Park

The global atmospheric transport of microplastics (MPs) plays a crucial role in the contamination of remote, especially higher-elevation, environments. Precipitation is considered the main source of MP pollution. Meanwhile, plastic waste generated from, for example, tourism activities can be a local source of MP pollution. In this study, we specify which of the mentioned sources of MP, global or local, have a higher impact on the pollution level in the high-elevation oligotrophic lakes of Tatra National Park in Poland. Due to its unique natural value, it is listed by UNESCO as an international biosphere reserve and meets the criteria for Natura 2000 areas. We comprehensively analyzed the morphometric and anthropogenic features of 11 lakes in terms of the contamination level, color, shape, and polymer type of the MPs found in the surface waters. MP fibers were found to be present in all studied lakes, with contamination ranging from 25 to 179 items/m3. Polypropylene, polyethylene terephthalate, and natural or semi-natural cellulose fibers—black or red in color with a length of 0.2–1.0 mm—predominated, which corresponds with other studies conducted on remote mountain ecosystems. We did not find any correlation of the number of MPs with local anthropogenic pressure characteristics. In turn, the significant correlation with lake area, coastline length, lake volume, and catchment area indicated airborne sources, including global transport of MPs to the lakes with reduced water outflow.

The Attachment of Juvenile Mussels via Byssus Weakened by Contaminated Polyethylene Fibers

In the process of mussel farming, the rope for attachment is indispensable, as it provides a stable attachment environment for mussel seedlings, directly affecting their survival rate and growth quality. The objective of this study is to examine the contamination of ropes, composed of polyethylene fibers, by heavy metals and polycyclic aromatic hydrocarbons (PAHs) after three years of deployment and to assess its influence on the attachment and locomotion behaviors of juvenile mussels. Utilizing a laboratory simulation of the seedling wrapping process, a comparative analysis was conducted to evaluate the number of juvenile mussels attached and their movement distances when exposed to contaminated old ropes versus uncontaminated new ropes. The findings indicated that the old ropes markedly diminished the attachment rate of juvenile mussels and heightened their movement distances. In particular, juvenile mussels utilizing old ropes exhibited a final attachment rate of 15.0% and an average movement distance of 0.86 cm, whereas those using new ropes achieved a final attachment rate of 96.7% with an average movement distance of 0.26 cm. Further inspection found that heavy metals and PAHs were present in the old rope, among which the concentrations of Zn (17.127 μg/g) and Pb (22.905 μg/g) in heavy metals were high, and the concentrations of Phe (5.53 μg/kg), Fla (6.35 μg/kg), and Pyr (5.17 μg/kg) in PAHs exceeded the detection limits, which were the main source of pollution. This research underscores the potential risk that heavy metal and PAHs contamination pose to the health of juvenile mussels and the profitability of aquaculture, emphasizing the critical need for the regular replacement of clean ropes.

Spatiotemporal Variation Characteristics and Source Identification of Nitrogen in the Baiyangdian Lake Water, China

To study the characteristics and sources of nitrogen in the Baiyangdian Lake, this research conducted water quality monitoring during three hydrological periods (normal period, flood period, and dry period), and 165 pieces of routine water quality monitoring data were collected from the three national control sections for Baiyangdian Lake and its inflow rivers. By integrating water chemical analysis with multivariate statistical techniques, the study comprehensively investigated the spatiotemporal variation patterns of nitrogen in Baiyangdian Lake and identified the sources of nitrogen pollution. The results showed that the concentration of total nitrogen (TN) was highest during the dry period, reaching an average of 0.924 mg/L, and 31.3% of the sites exceeded the national Grade III surface water quality standard, reflecting a potential risk of nitrogen pollution. Based on the ion ratio method and principal component analysis (PCA), the main sources of nitrogen pollution in Baiyangdian Lake were identified as manure and domestic sewage, with agricultural fertilizers also having a certain impact on water nitrogen pollution. In addition, the study also compared the nitrogen concentration in Baiyangdian Lake with several important lakes in China. The results showed that the concentrations of TN and ammonium nitrogen (NH4+-N) in Baiyangdian Lake are lower than those in lakes in areas with similar human activity intensity, indicating that the water quality of Baiyangdian is relatively good. This study can provide a scientific basis for water quality management and pollution prevention for Baiyangdian Lake.

Evaluation and pollution analysis of water environment of state-controlled river in Zaozhuang City from 2016 to 2022

The quality of water environment is closely linked to the survival and development of human beings. Thanks to the Water Pollution Prevention and Control Action Plan, the quality of the water environment has improved significantly. However, challenges remain in the surface water environment due to human activities in the basin. We analyze the surface water quality of the six state-controlled rivers in Zaozhuang City, which are key tributaries to the Nansi Lake and the water storage and distribution area of the South-to-North Water Diversion East Project. Physical-chemical parameters and metal pollutants were detected from 2016 to 2022. The Various indices were used for evaluating the surface water environmental quality and pollution issue. Although there were significant inter-year differences in each river, the results of Water quality index and Nemerow composite index analysis indicated that the water quality of the six rivers has continuously improved over the years. Nevertheless, as this research reports, such as considerable annual fluctuations in pollution factors, obvious pollution characteristics in river basins, and difficulty in controlling non-point source pollution, which still restrict the further improvement of the water environment. Each river presents various water environment problems due to differences in industrial structures within its basin. Through the analysis of production and lifestyle in each basin, the main pollution sources of each river were evaluated and determined. Based on the type and characteristics of pollution sources, control measures and optimization strategies are proposed for the improvement of the water environment.

Response of Water Quality to Land Use and Landscape Pattern in the Ganjiang River Watershed.

Analysing the impact of landscape composition and structure on water quality at different scales is of great significance to water quality protection. The aim of this study was to determine scale-dependent impacts of land use/landscape patterns on water quality. The Ganjiang River, the largest water system in the Poyang Lake watershed, the largest freshwater lake in China. The response of water quality to land use and landscape patterns in the Ganjiang River watershed was explored based on land use and water quality data using redundancy and Spearman correlation analyses. Considering upstream monitoring of the entire Ganjiang River watershed; watersheds at the county level administrative region; and 1, 2, 5, 10, 15, 20, and 30 km-radius circular buffer zones, a total of nine scales of land use/landscape patterns that influence water quality in the Ganjiang River watershed were analysed. Results indicated that the county-level scale and the land use type of the 20 km-radius buffer zone upstream of the monitoring site were closely linked to water quality (96.28% and 93.23%, respectively). Among the land use types, construction land and cultivated land were the main output sources of pollutants. Regarding landscape pattern index, the greater the fragmentation of the landscape, the heavier was the water pollution load; the more the patches per unit area, the more stable was the ecosystem and the lower was the pollutant concentration. In addition, the eco-hydrological system of the Ganjiang River watershed was revealed to some extent through multi-angle analysis. These conclusions can serve as a reference for government departments to formulate land management and water quality protection measures.

The Study of the Mechanical Strength of Polypropylene Filter Material for the Production of Disposable Respirators

Atmospheric air, which is a natural resource, significantly affects the health and disease level of the population [1, 2], as well as the quality of the environment [3, 4]. However, as a result of anthropogenic activity, the environmental condition of the air has a tendency of constant deterioration [5, 6]. The main anthropogenic source of atmospheric pollution is large industrial conglomerates, which include motor vehicles [7, 8]. Chemical pollution of the air on a global scale leads to the greenhouse effect, the appearance of acid rain [9, 10] and pollution of aquifers [11, 12], and as a result, an increase in diseases [13], pandemics [14]. The goal of the study is to investigate the relationship between the mechanical characteristics of polypropylene filter material and their deformation under external forces for stretching and determine the safe period of use of disposable respirators. Four types of samples have been used for experimental research. Operational properties were determined by three indicators: elongation from applied force, penetration coefficient by a test aerosol of paraffin oil, and air flow resistance in accordance with the requirements of the DSTU EN 149:2017 standard. The dependence of relative elongation on tensile force has been established for samples of Eleflen and Meltblown materials with an additional layer of coarse fiber material and without an additional layer. It has been shown that the presence of an additional layer increases the tensile force of the filter material sample by 1.5 times. It has been found that the longitudinal fibers of the filter material samples withstand 15 % more external force applied for stretching, allowing manufacturers to ensure the proper fit of respirator structural elements, which ensures a longer service life. Research results show that an additional layer of material increases the strength indicators of the main filter layer by 3 times. Scientific novelty lies in determining the relationship between the mechanical characteristics of polypropylene filter material for the production of disposable protective respirators and their protective properties and deformation under external forces by stretching. The practical value involves in determining the penetration coefficient, which ensures the appropriate protective efficiency of the respirator within the range of 0 to 10% elongation. The presence of an additional layer of coarse fiber material allows increasing this value based on the properties of the filter material (fiber thickness, packing density).

Analysis and probabilistic health risk assessment of vertical heavy metal pollution in the water environment of reservoir in the west coast new area of Qingdao, China

The West Coast New Area is a typical city in China where water supply is predominantly sourced from reservoirs. Heavy metal pollution in these reservoirs directly impacts the safety of drinking water and human health. Therefore, this study comprehensively evaluated the status of heavy metal pollution in the water environment and sediment of the main water supply reservoir in the study area, revealing the interaction relationship and pollution sources, as well as assessing the probabilistic health risks to human beings. The results show that there are different degrees of pollution in the main water supply reservoirs in the study area, and the pollution increases with the increase of water depth. The heavy metal pollution index was up to 2681, indicating heavily pollution. The main polluting elements were Mn and Fe, and the maximum contents were 4.11 mg L−1 and 0.68 mg L−1, respectively, which far exceeded the Class III standard limit of drinking water in China. The main source of pollution is human activities, and Mn release from sediment aggravates deep water pollution. The non-carcinogenic risk index of heavy metals in the reservoir, ranging from 4% to 14%, is higher than 1, indicating a potential non-carcinogenic threat. Furthermore, heavy metals have a much greater impact on children compared to adults, among which Mn is the main contributor to human non-carcinogenic risk, contributing more than 60%. Therefore, controlling the content of Mn and Fe can effectively reduce the heavy metal pollution of reservoir and human health risk. The research results are of great significance for the utilization of reservoir water resources and the protection of the ecological environment in the study area.

Indoor Air Quality at an Urban Primary School in Madrid (Spain): Influence of Surrounding Environment and Occupancy.

Monitoring indoor air quality (IAQ) in schools is critical because children spend most of their daytime inside. One of the main air pollutant sources in urban areas is road traffic, which greatly influences air quality. Thus, this study addresses, in depth, the linkages of meteorology, ambient air pollution, and indoor activities with IAQ in a traffic-influenced school situated south of Madrid. The measurement period was from 22 November to 21 December 2017. Simultaneous measurements of indoor and outdoor PM1, PM2.5, and PM10 mass concentrations, ultrafine particle number concentration (PNC) and equivalent black carbon (eBC) were analyzed under different meteorological conditions. PNC and eBC outdoor concentrations and their temporal trend were similar among the sampling points, with all sites being influenced in the same way by traffic emissions. Strong correlations were found between indoor and outdoor concentrations, indicating that indoor pollution levels were significantly affected by outdoor sources. Especially, PNC and eBC had the same indoor/outdoor (I/O) trend, but indoor concentrations were lower. The time delay in indoor vs. outdoor concentrations varied between 0.5 and 2 h, depending on wind speed. Significant differences were found between different meteorological conditions (ANOVA p-values < 2.14 × 10-6). Atmospheric stability periods led to an increase in indoor and outdoor pollutant levels. However, the highest I/O ratios were found during atmospheric instability, especially for eBC (an average of 1.2). This might be related to rapid changes in the outdoor air concentrations induced by meteorology. Significant variations were observed in indoor PM10 concentrations during classroom occupancy (up to 230 µg m-3) vs. non-occupancy (up to 19 µg m-3) days, finding levels higher than outdoor ones. This was attributed to the scholarly activities in the classroom. Conversely, PNC and eBC concentrations only increased when the windows of the classroom were open. These findings have helped to establish practical recommendations and measures for improving the IAQ in this school and those of similar characteristics.

Emerging insights into the application of metal-organic framework (MOF)-based materials for electrochemical heavy metal ion detection

Heavy metal ions are one of the main sources of water pollution, which has become a major global problem. Given the growing need for heavy metal ion detection, electrochemical sensor stands out for its high sensitivity and efficiency. Metal-organic frameworks (MOFs) have garnered much interest as electrode modifiers for electrochemical detection of heavy metal ions owing to their significant specific surface area, tailored pore size, and catalytic activity. This review summarizes the progress of MOF-based materials, including pristine MOFs and MOF composites, in the electrochemical detection of various heavy metal ions. The synthetic methods of pristine MOFs, the detection mechanisms of heavy metal ions and the modification strategies of MOFs are introduced. Besides, the diverse applications of MOF-based materials in detecting both single and multiple heavy metal ions are presented. Furthermore, we present the current challenges and prospects for MOF-based materials in electrochemical heavy metal ion detection.

Simulation and Analysis of Water Quality Improvement Measures for Plain River Networks Based on Infoworks ICM Model: Case Study of Baoying County, China

The water environment of plain river networks can be self-cleaning to a certain extent, but if the wastewater load exceeds a certain threshold, it can disturb the natural balance and cause water pollution. This underlines the importance of water pollution control measures. However, the development of water pollution control measures requires a large number of hydrological and hydrodynamic parameters and the establishment of corresponding relationships through modelling. Therefore, this study mainly used the Infoworks ICM model to construct a detailed hydrological–hydrodynamic water environment analysis model for the Yundong area of Baoying County, Yangzhou City, China, screened the main pollution source areas and pollution time periods of the typical rivers in the study area, and proposed effective improvement measures according to the actual situation of the study area. The results show that after the synergistic effect of multiple measures, the water quality can reach the Class III standard (GB3838-2002). This study can provide a reference for the water environment management and improvement of the plain river network and has good application prospects.

Air pollution and grouping of cities according to their environmental status

In the article, the ecological situation of the cities located in the Kura-Araz plain is analyzed. Our study area is the most populated and most important agricultural region in the country. The possibility of environmental pollution is also high in the area located on the east- west roads. In particular, the pollutants released into the atmosphere were analyzed and the results were determined. During the research, the atmospheric pollution in the cities during the historical period was studied using the mathematical-statistical method. Ecological zoning of cities was carried out using GIS technologies. The main source of air pollution in cities is cars, their number, and the use of outdated cars. Another reason is the important industrial cities located in the study area. Substances released into the air from industrial enterprises pollute the atmosphere of the cities. It was determined that the environmental situation is more intense in cities where large industrial enterprises are located. There are large, medium and small cities in the study area. The main polluting cities are the cities of Mingachevir and Shirvan, which belong to the group of large and medium cities because the most important industrial enterprises of the country are located here. Also, these cities are important power centers of the country. These cities differ from others in terms of population. At the same time, we have included the city of Yevlakh in the group of cities with an important role in atmospheric pollution. As a result of the analysis, ecological zoning of cities was carried out. At this time, 3 gradations were used. During this zoning, the pollution of the atmosphere was taken into account. The influence of carbon monoxide CO2, carbon oxides CHx, nitrogen oxides NOx and sulfur oxides SOx on atmospheric air in cities was analyzed. The main cause of pollution is the location at the intersection of highways. The location on the east-west roads has made the ecological situation in the cities even more tense. Especially in Mingachevir and Shirvan, the environmental situation is more intense.

Dust Pollution in Construction Sites in Point-Pattern Housing Development

Construction in cities and agglomerations is one of the main sources of air pollution in most countries in the world. Fine dust particles, PM0.5–PM10, which form as a result of construction processes, are among the most dangerous pollutants. With the increase in the volume of point-pattern housing development in cities, the task of maintaining clean air and environmental conditions becomes important. This requires research, the monitoring of dust emissions throughout the entire construction period and the development of design solutions based on the results obtained. The study examines the determination of the dispersed composition of dust generated on a construction site. A graphical representation of the dispersed composition is given by constructing integral curves on a logarithmic grid and approximating them using two-link and three-link splines. The gravimetric measurement method was used to analyze the concentration of dust in the air released during construction work near residential areas. Dust analysis at the construction site revealed significant differences in particle size that cannot be explained by statistical errors alone. The reasons for this are both working conditions and climatic factors, including humidity and wind intensity. In this regard, it is preferable to use models that take into account random processes instead of traditional deterministic methods to study the dust that shapes during construction.

Initial Insights into Teleworking’s Effect on Air Quality in Madrid City

Commuting to work by private vehicle is one of the main sources of air pollution in cities, mainly from NO2 and particulate matter (PM2.5 and PM10). With the spread of telework, traffic congestion during peak hours is reduced on certain days of the week, improving air quality. This study analyzes the relationship between the improvement of air quality and urban traffic resulting from teleworking activities after the COVID-19 pandemic in Madrid, Spain. This article considers road traffic and teleworking before the COVID-19 pandemic (2018 and 2019), during the pandemic (2020 and 2021) and in the period after (2022 and 2023) in the city center and the influence on certain environmental factors. Daily NO2, PM2.5, PM10, and O3 concentration data were collected at air quality stations in Madrid municipality, and traffic data and some meteorological variables such as wind speed, precipitation and temperature were considered. When conducting correlation and regression analysis among the variables, there is a clear association between NO2 and traffic before the pandemic, which is lower for both PM and O3. This correlation was maintained during the pandemic, except for O3, the association of which increased during this period and then decreased in the later period due to various motives. These results seem to indicate the existence of a relevant relationship between urban mobility and air quality and an especially relevant relationship with telework, suggesting the need for policies aimed at promoting sustainable mobility in the future.