Main Erosion Processes Research Articles

Agricultural activities lead to sediment infilling of wetlandscapes in the Canadian Prairies: Assessment of contributions by tillage, water and wind erosion

Soil erosion and sediment delivery models have been increasingly employed in studies of catchment sediment dynamics in current years. These models are also used to represent the spatial interaction of soil erosion and sediment transport processes, thereby providing spatially-distributed predictions of soil redistribution rates for agricultural landscapes. It has been widely recognized that individual soil erosion processes and their interactions contribute towards total soil erosion; however, quantifying the rates and patterns of soil erosion processes and their interactions within topographically complex landscapes is challenging. Therefore, the objective of this research was to estimate and model the relative contributions of tillage, water and wind erosion towards total soil erosion in the Canadian Prairie provinces of Manitoba and Alberta using 137Cs, a fallout radionuclide tracer, and three well-established models: (i) Tillage Erosion Model (TillEM); (ii) Revised Universal Soil Loss Equation, version 2 (RUSLE2); and (iii) Single-event Wind Erosion Evaluation Program (SWEEP). The findings indicate that the patterns of 137Cs-estimated soil erosion were closely matched with the erosion pattern predicted by TillEM and suggests that tillage erosion dominates the pattern of total soil erosion on the knolls of hummocky landscapes. Additionally, soil particle size variation within the wetland catchments reflected the modeled patterns of water and tillage erosion. Furthermore, our findings confirmed that colour coefficients are useful in identifying spatial heterogeneity of soil within wetland catchments and reflect the patterns of soil loss and gains. These results indicate that water and tillage erosion, and also their interactions, are main erosion processes in the Canadian Prairie Pothole Region (PPR), but that soil movement by tillage practices has been the predominant redistribution process.

Quantifying lateral bedrock erosion caused during a hyperconcentrated flow in a narrow alpine limestone gorge

Here, we show results of an unprecedented LiDAR dataset quantitatively determining the lateral bedrock erosion of a narrow limestone gorge during an extreme hyperconcentrated flow. The comparison of two point clouds prior and post to the June 15th hyperconcentrated flow event provide information about the massive breakout of particles and abrasion of the channel walls. With a multiscale model to model cloud comparison analysis, we can show that particles from 0.0001 m3 and 3.5 m3 were eroded from the subvertical limestone gorge walls. A total of 20.9 m3 of massive bedrock was eroded in the observable part of the channel with 90 % of the particles being smaller than 0.15 m3. We delimited two main erosion processes during the hyperconcentrated flow event: shearing of particles that reach into the flow and particles with predefined failure surfaces, and abrasion along the whole channel, detectable by LiDAR if the changes are > 3 cm. This study provides quantitative evidence for massive rock erosion processes in alpine gorges that could also control rock gorge formation and evolution over Holocene/Lateglacial time scales.

Improving stock unearthing method to measure soil erosion rates in vineyards

Vineyard soils experience high erosion rates compared to soils from other agricultural land uses. The high soil losses in vineyards limits the sustainability of traditional production schemes and warrants comprehensive research aimed at thwarting the main erosion processes affecting vineyard systems. However, long-term measurements, which include spatial variability of soil erosion rates at the plot scale, are uncommon, as most of the measurements have taken place either at the hillslope or watershed scales. Against this background, the stock unearthing method (SUM) can be considered a useful methodology. However, the current method falls short because it assumes that the topography between the vine lines (inter-rows) remains planar. Therefore, we propose a new methodology (ISUM: improved stock unearthing method) that includes three measurements between in the inter-row areas. By taking inter-row measurements, we hypothesized that the spatial patterns of sediment detachment, transport and deposition features in the inter-rows would be detected. The ISUM costs 20% more time to conduct than the SUM, but greatly improved the utility of the field survey. ISUM allowed for: i) the creation of maps that identified linear soil erosion features and accumulation sites; ii) measures the amount of soil accumulated under the vines; iii) estimation of soil erosion rates with higher accuracy at long-term periods in a specific moment. This study compared the ISUM with the SUM in a vineyard in Spain. Soil erosion rates with ISUM were −2.5 Mg ha yr−1 while the SUM calculated rates of +4.9 Mg ha yr−1.Results showed that the traditional method underestimated soil rates a −25.7%. Maps created with the ISUM technique could also be used to provide insights about sediment connectivity.

Erosion and sediment transfer processes at the front of rapidly moving rock glaciers: Systematic observations with automatic cameras in the western Swiss Alps

AbstractWhen connected to torrential channels, the fronts of active rock glaciers constitute important sediment sources for gravitational transfer processes. In this study, a 2013–16 time series of in situ webcam images from the western Swiss Alps was analyzed to characterize the erosion processes responsible for sediment transfer at the front of three rapidly moving rock glaciers and their temporal behavior. The main erosion processes comprised rock fall, debris slide, superficial flow and concentrated flow. These processes were induced by (i) changes of the frontal slope angle produced by rock glacier advance, and (ii) increases in water content of the sediments at the rock glacier front due to melt processes and rainfall. Erosion almost ceased during winter, when the front was frozen and snow‐covered. The onset of snowmelt triggered an active period of high‐frequency erosion events. After the melt period, sediment transfer continued as occasional rock falls, while other erosion processes occurred only during or following rainfall events. Intense regressive erosion phases that triggered debris flows were rare and occurred when enhanced snowmelt and/or recurring rainfall induced substantial groundwater flow on the debris slopes directly below the rock glacier fronts.

MAPPING LINEAR EROSION FEATURES USING HIGH AND VERY HIGH RESOLUTION SATELLITE IMAGERY

ABSTRACTMapping and monitoring linear erosion features (LEFs) over large areas is fundamental for a better understanding of the main erosion processes and for planning suitable protection measures. The advent of very high‐resolution satellite imagery has expanded the range of satellite LEF identification to moderate‐size elements. After determining the relationship between satellite imagery resolution and the ability to detect LEFs, we discuss a highly automated method for extracting such LEFs from a very high spatial resolution image (0.61 m resolution). The method is based on a two‐stage strategy: (1) extraction of all linear features visible on the satellite image using filters and photo‐interpretation; (2) filtering these linear features according to geometric criteria (e.g. orientation relative to slope, sinuosity, position in landscape, etc.) so as to retain only those relative to linear erosion. A series of three images with increasing spatial resolution (10.5 and 0.61 m) was prepared for an area on the Cap Bon peninsula (Tunisia). This predominantly agricultural area has a high density of LEFs with very varied geometric characteristics. The area's problems are both onsite for the agriculture itself, and offsite with the silting up of hillside reservoirs. Respectively 22 per cent, 37 per cent and 73 per cent of the site's LEFs, with respective average widths of 2.8, 3.0 and 2.2 m, are visible on the 10, 5 and 0.61 m resolution images. Gully identification should help to identify the most threatened areas to help land use planning and management or to validate erosion models whether at regional or local (drainage basin) scale. Copyright © 2011 John Wiley & Sons, Ltd.

Soil detachment and transport on field‐ and laboratory‐scale interrill areas: erosion processes and the size‐selectivity of eroded sediment

AbstractField‐ and laboratory‐scale rainfall simulation experiments were carried out in an investigation of the temporal variability of erosion processes on interrill areas, and the effects of such variation upon sediment size characteristics. Poorly aggregated sandy soils from the semi‐arid environment of Senegal, West Africa, were used on both a 40 m2 field plot and a 0·25 m2 laboratory plot; rainfall intensity for all experiments was 70 mm h−1 with a duration of 1 to 2 hours. Time‐series measurements were made of the quantity and the size distribution of eroded material: these permitted an estimate of the changing temporal balance between the main erosion processes (splash and wash). Results from both spatial scales showed a similar temporal pattern of runoff generation and sediment concentration. For both spatial scales, the dominant erosional process was detachment by raindrops; this resulted in a dynamic evolution of the soil surface under raindrop impact, with the rapid formation of a sieving crust followed by an erosion crust. However, a clear difference was observed between the two scales regarding the size of particles detached by both splash and wash. While all measured values were lower than the mean weight diameter (MWD) value of the original soil (mean 0·32 mm), demonstrating the size‐selective nature of wash and splash processes, the MWD values of washed and splashed particles at the field scale ranged from 0·08 to 0·16 mm and from 0·12 to 0·30 mm respectively, whereas the MWD values of washed and splashed particles at the laboratory scale ranged from 0·13 to 0·29 mm and from 0·21 to 0·32 mm respectively. Thus only at the field scale were the soil particles detached by splash notably coarser than those transported by wash. This suggests a transport‐limited erosion process at the field scale. Differences were also observed between the dynamics of the soil loss by wash at the two scales, since results showed wider scatter in the field compared to the laboratory experiments. This scatter is probably related to the change in soil surface characteristics due to the size‐selectivity of the erosion processes at this spatial scale. Copyright © 2006 John Wiley & Sons, Ltd.

Relations between interrill erosion processes and sediment particle size distribution in a semiarid Mediterranean area of SE of Spain

Erosion and sediment characteristics were measured using simulated rainfall on two cultivated soils of contrasting lithology (Quaternary calcareous colluvium and Tertiary marls) in a semiarid Mediterranean area of SE Spain. Two rainfall intensities, high (56.0±2.4 mm h −1) and medium (31.4±1.4 mm h −1), were used in order to know the mechanisms involved in each selected condition. For each simulated event, runoff and sediment were sampled at 1-min intervals on a 1-m wide by 2-m long erosion plot. The erosion rate was calculated as the total amount of soil lost divided by the time period of the test. The duration of the test was that needed to reach steady state runoff, an average time of 24.5 min for Quaternary calcareous colluvium and 17.7 min for Tertiary marls. The size distribution of the transported sediment in the field (effective size distribution) was compared with equivalent measurements of the same samples after chemical and mechanical dispersion (ultimate size distribution) to investigate the detachment and transport mechanisms involved in sediment mobilisation. The results showed that the soil type determined the hydrological response, regardless of the rainfall intensity. The erosional response was, however, determined by the rainfall and soil surface characteristics. In Quaternary calcareous colluvial soils, the predominant erosion process depended on the rainfall intensity, with a prevailing detachment-limited condition in high-intensity events and prevailing transport-limited conditions in those events of medium intensity. These differences in the main erosion processes were reflected in the size of the transported material and in the change in sediment size within the storm. Thus, a time-dependent size distribution of the eroded material (decreasing coarse fractions and increasing fine fractions with runoff time) was observed for high-intensity events. In medium-intensity events, on the other hand, the time-independent size distribution of the eroded material indicated transport-limited erosion. Due to the rapid surface crusting on the Tertiary marl soil, no differences in the main erosion processes or in the sediment size distribution occurred for the different rainfall intensities tested. The erosion of marl soils was determined mainly by the limited quantity of available sediment. The effective size of material was a more sensitive parameter than the ultimate size of the sediment to study the way in which the sediment was transported.

Plasma-surface interactions: The role of charged particle emission

It is pointed out that several of the main erosion processes in plasma-surface interactions are governed by electron emission from the solids’ surfaces.

Surface erosion from plasma materials interaction

The main erosion processes in plasma solid interaction are sputtering, unipolar arcs, heat pulses, leading to surface cracking and evaporation,and finally the gas atom implantation leading to chemical reactions, to embrittlement,and,in some cases, to blistering. Todays knowledge about these phenomena is reviewed. Some erosion data are given and their importance in plasma-wall interaction is discussed.