Main-chain Amide Research Articles

Mainchain and sidechain-involving H-bonded asymmetric polyimides containing rigid amide and flexible ether linkages

Hydrogen bonds (H-bonds), usually mainchain amide H-bonds, have been well recognized to play important roles in modulating the properties of polyimides (PIs) by strengthening macromolecular interaction. While the structure-properties relationships of symmetric mainchain amide H-bonded PIs have been extensively researched, the asymmetric H-bonded PIs, particularly those containing rigid-flexible backbone structure, and sidechain-involving H-bonds, have been rarely explored. Herein, starting from designed synthesis of diamine monomers, we present two series of asymmetric PIs containing rigid amide and flexible ether linkages that form mainchain amide-amide and amide-imide H-bonds, lacking or bearing pendent trifluoromethyls (-CF3) that form sidechain-involving amide-CF3 H-bonds. The presence of these three types of H-bonds were revealed by RDF simulation and confirmed by FTIR. Mainchain H-bonded PIs (PI-Ax) show higher Tg than sidechain-involving H-bonded PIs (PI-Tx), while PI-Tx series exhibit higher optical transparency and hydrophobicity, lower dielectric constant (ε′) and better mechanical properties than PI-Ax. The general researches on the PIs’ solubility, WAXD spectra, thermal properties, fluorescence emission and optical transparency, the dihedral angles (φ), fractional free volume (FFV), theoretical gas transport properties, chain geometry optimization and HOMO-LUMO energy gap (ΔE) values have been comprehensively carried out from the aspects of both experiments and theoretical calculation.

Controllable micro cross-linking towards multifunctional flame-retardant aliphatic polyamide

Constructing micro cross-linking structures into molecular chains has demonstrated the ability to improve basic properties, such as mechanical strength and thermal stability, of thermoplastic polymers. However, this method has limitations when it comes to improving the functionality of polymers. Herein, we reported a multifunctional micro cross-linking network that improves not just mechanical strength but also flame retardancy, dielectric properties, battery performance, antistatic properties, etc. A novel phosphinamide-containing monomer was designed, synthesized, and copolymerized into the polymer chain of polyamide 6, a typical thermoplastic polymer. On the one hand, the micro cross-linking structure was successfully obtained through the amide interchange reaction between the side-chain phosphinamide groups and the main-chain amide groups, leading to a 23.7% improvement of tensile strength and largely maintained tensile toughness. On the other hand, the functional phosphorus groups showed an efficient free-radical-capturing effect during fire, endowing the copolymer with excellent flame retardancy at a low monomer content of 2 mol%. Additionally, the copolymer also possessed great spinnability, melt-crystallization performance, as well as dielectric property, antistatic property, and battery performance, enabling its potential in a wide variety of applications.

Hydrogen bonds connecting the N-terminal region and the DE loop stabilize the monomeric structure of transthyretin.

Transthyretin (TTR) is a homo-tetrameric serum protein associated with sporadic and hereditary systemic amyloidosis. TTR amyloid formation proceeds by the dissociation of the TTR tetramer and the subsequent partial unfolding of the TTR monomer into an aggregation-prone conformation. Although TTR kinetic stabilizers suppress tetramer dissociation, a strategy for stabilizing monomers has not yet been developed. Here, we show that an N-terminal C10S mutation increases the thermodynamic stability of the TTR monomer by forming new hydrogen bond networks through the side chain hydroxyl group of Ser10. Nuclear magnetic resonance spectrometry and molecular dynamics simulation revealed that the Ser10 hydroxyl group forms hydrogen bonds with the main chain amide group of either Gly57 or Thr59 on the DE loop. These hydrogen bonds prevent the dissociation of edge strands in the DAGH and CBEF β-sheets during the unfolding of the TTR monomer by stabilizing the interaction between β-strands A and D and the quasi-helical structure in the DE loop. We propose that introducing hydrogen bonds to connect the N-terminal region to the DE loop reduces the amyloidogenic potential of TTR by stabilizing the monomer.

Synthesis and Stereochemical Determination of the Peptide Antibiotic Novo29.

This paper describes the synthesis and stereochemical determination of Novo29 (clovibactin), a new peptide antibiotic that is related to teixobactin and is active against Gram-positive bacteria. Novo29 is an eight-residue depsipeptide that contains the noncanonical amino acid hydroxyasparagine of hitherto undetermined stereochemistry in a macrolactone ring. The amino acid building blocks Fmoc-(2R,3R)-hydroxyasparagine-OH and Fmoc-(2R,3S)-hydroxyasparagine-OH were synthesized from (R,R)- and (S,S)-diethyl tartrate. Novo29 and epi-Novo29 were then prepared by solid-phase peptide synthesis using these building blocks. Correlation with an authentic sample of Novo29 through 1H NMR spectroscopy, LC-MS, and in vitro antibiotic activity established that Novo29 contains (2R,3R)-hydroxyasparagine. X-ray crystallography reveals that epi-Novo29 adopts an amphiphilic conformation, with a hydrophobic surface and a hydrophilic surface. Four sets of epi-Novo29 molecules pack in the crystal lattice to form a hydrophobic core. The macrolactone ring adopts a conformation in which the main-chain amide NH groups converge to create a cavity, which binds ordered water and acetate anion. The amphiphilic conformation of epi-Novo29 is reminiscent of the amphiphilic conformation adopted by the related antibiotic teixobactin and its derivatives, which contains a hydrophobic surface that interacts with the lipids of the bacterial cell membrane and a hydrophilic surface that interacts with the aqueous environment. Molecular modeling suggests that Novo29 can adopt an amphiphilic conformation similar to teixobactin, suggesting that Novo29 may interact with bacteria in a similar fashion to teixobactin.

New insights into the oxidation process from neutron and X-ray crystal structures of an O2-sensitive [NiFe]-hydrogenase.

[NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F is an O2-sensitive enzyme that is inactivated in the presence of O2 but the oxidized enzyme can recover its catalytic activity by reacting with H2 under anaerobic conditions. Here, we report the first neutron structure of [NiFe]-hydrogenase in its oxidized state, determined at a resolution of 2.20 Å. This resolution allowed us to reinvestigate the structure of the oxidized active site and to observe the positions of protons in several short hydrogen bonds. X-ray anomalous scattering data revealed that a part of the Ni ion is dissociated from the active site Ni-Fe complex and forms a new square-planar Ni complex, accompanied by rearrangement of the coordinated thiolate ligands. One of the thiolate Sγ atoms is oxidized to a sulfenate anion but remains attached to the Ni ion, which was evaluated by quantum chemical calculations. These results suggest that the square-planar complex can be generated by the attack of reactive oxygen species derived from O2, as distinct from one-electron oxidation leading to a conventional oxidized form of the Ni-Fe complex. Another major finding of this neutron structure analysis is that the Cys17S thiolate Sγ atom coordinating to the proximal Fe-S cluster forms an unusual hydrogen bond with the main-chain amide N atom of Gly19S with a distance of 3.25 Å, where the amide proton appears to be delocalized between the donor and acceptor atoms. This observation provides insight into the contribution of the coordinated thiolate ligands to the redox reaction of the Fe-S cluster.

Backbone amides are determinants of Cl− selectivity in CLC ion channels

Chloride homeostasis is regulated in all cellular compartments. CLC-type channels selectively transport Cl− across biological membranes. It is proposed that side-chains of pore-lining residues determine Cl− selectivity in CLC-type channels, but their spatial orientation and contributions to selectivity are not conserved. This suggests a possible role for mainchain amides in selectivity. We use nonsense suppression to insert α-hydroxy acids at pore-lining positions in two CLC-type channels, CLC-0 and bCLC-k, thus exchanging peptide-bond amides with ester-bond oxygens which are incapable of hydrogen-bonding. Backbone substitutions functionally degrade inter-anion discrimination in a site-specific manner. The presence of a pore-occupying glutamate side chain modulates these effects. Molecular dynamics simulations show backbone amides determine ion energetics within the bCLC-k pore and how insertion of an α-hydroxy acid alters selectivity. We propose that backbone-ion interactions are determinants of Cl− specificity in CLC channels in a mechanism reminiscent of that described for K+ channels.

Selenourea for Experimental Phasing of Membrane Protein Crystals Grown in Lipid Cubic Phase

Heavy-atom soaking has been a major method for experimental phasing, but it has been difficult for membrane proteins, partly owing to the lack of available sites in the scarce soluble domain for non-invasive heavy-metal binding. The lipid cubic phase (LCP) has proven to be a successful method for membrane protein crystallization, but experimental phasing with LCP-grown crystals remains difficult, and so far, only 68 such structures were phased experimentally. Here, the selenourea was tested as a soaking reagent for the single-wavelength anomalous dispersion (SAD) phasing of crystals grown in LCP. Using a single crystal, the structure of the glycerol 3-phosphate acyltransferase (PlsY, ~21 kDa), a very hydrophobic enzyme with 80% membrane-embedded residues, was solved. Remarkably, a total of 15 Se sites were found in the two monomers of PlsY, translating to one selenourea-binding site per every six residues in the accessible extramembrane protein. Structure analysis reveals that surface-exposed selenourea sites are mostly contributed by mainchain amides and carbonyls. This low-specificity binding pattern may explain its high loading ratio. Importantly, both the crystal diffraction quality and the LCP integrity were unaffected by selenourea soaking. Taken together, selenourea presents a promising and generally useful reagent for heavy-atom soaking of membrane protein crystals grown in LCP.

Fluorescent self-healing waterborne polyurethane based on naphthalimide derivatives and its application in anti-counterfeiting

Waterborne polyurethane with high rigidity and self-healing properties plays an important role in polymer dyes and fluorescent anti-counterfeiting. In this paper, a naphthalimide derivative BHHNA-AM with high fluorescence and strong intermolecular hydrogen bonds was prepared and used as chain extender to synthesize a fluorescent waterborne polyurethane (PUAM). Intriguingly, the presence of highly rigid conjugate plane in molecules and strong non-covalent interaction between main chain and side chain amide group afforded PUAM film an autonomous self-healability at room temperature, the self-healing rate of scratched PUAM could be restored from 47.73% to 94.62% within 9 h, which could be widely used as thermoplastic adhesive. In addition, PUAM emulsion could be used as anti-counterfeiting ink printed on different substrates. After 14 days of UV irradiation and heat treatment, the color difference of printed products was less than 3.5, indicating excellent light resistance.

Hydrogen/Deuterium Exchange Behavior During Denaturing/Refolding Processes Determined in Tetragonal Hen Egg-White Lysozyme Crystals.

The hydrogen/deuterium (H/D) exchange of main-chain amide hydrogens in the protein that denatured and refolded in deuterated solvent is considered to contain the traces of hydrogen bond cleavages or the exposure to solvent of the buried part of the protein during the denaturing and refolding (denaturing/refolding) processes. Here, we report the H/D exchange behaviors in hen egg-white lysozymes denatured under acidic conditions, basic conditions, and thermal conditions and then refolded in deuterated solvents, using crystallographic methods. The results indicate that the space containing the Trp28 side chain was hardly exposed to the solvent in acidic conditions, but exposed under basic or heated conditions. Moreover, the β-bridges between Tyr53 and Ile58 in strands β2 and β3, which are in a highly conserved region, show some tolerance to changes in pD. The results indicate that crystallographic method is one of the powerful tools to analyze the denaturing/refolding processes of proteins.

The ubiquitous buried water in the beta-trefoil architecture contributes to the folding nucleus and ~20% of the folding enthalpy.

The beta-trefoil protein architecture is characterized by three repeating "trefoil" motifs related by rotational symmetry and postulated to have evolved via gene duplication and fusion events. Despite this apparent structural symmetry, the primary and secondary structural elements typically exhibit pronounced asymmetric features. A survey of this family of proteins has revealed that among the most conserved symmetric structural elements is a ubiquitous buried solvent which participates in a bridging H-bond with three different beta-strands in each of the trefoil motifs. A computational analysis reported that these waters are likely associated with a substantial enthalpic contribution to overall stability. In this report, a Pro mutation is used to disrupt one of the water H-bond interactions to a main chain amide, and the effects upon stability and folding kinetics are determined. Combined with Ala mutations, the separate effects upon side chain truncation and H-bond deletion are analyzed in terms of stability and folding kinetics. The results show that these buried waters act to assemble a central folding nucleus, and are responsible for ~20% of the overall favorable enthalpy of folding.

Influence of the conformations of αA-crystallin peptides on the isomerization rates of aspartic acid residues

The isomerization rate of aspartic acid (Asp) residue is known to be affected by the three-dimensional structures of peptides and proteins. Although the isomerized Asp residues were experimentally observed, structural features which affect the isomerization cannot be elucidated sufficiently because of protein denaturation and aggregation. In this study, molecular dynamics (MD) simulations were conducted on three αA-crystallin peptides (T6, T10, and T18), each containing a single Asp residue with different isomerization rate (T18 > T6 > T10) to clarify the structural factors of Asp isomerization tendency. For MD trajectories, distances between side-chain carboxyl carbon of Asp and main-chain amide nitrogen of (n + 1) residue (Cγ–N distances), root mean square fluctuations (RMSFs), and polar surface areas for main-chain amide nitrogen of (n + 1) residues (PSAN) were calculated, because these structural features are considered to relate to the formations of cyclic imide intermediates. RMSFs and PSAN are indexes of peptide backbone flexibilities and solvent exposure of the amide nitrogen, respectively. The average Cγ–N distances of T10 was longer than those of the other two peptides. In addition, the peptide containing Asp residue with a higher isomerization rate showed higher flexibility of the peptide backbone around the Asp residue. PSAN for amide nitrogen in T18 were much larger than those of other two peptides. The computational results suggest that Asp-residue isomerization rates are affected by these factors.

Computational studies on nonenzymatic succinimide-formation mechanisms of the aspartic acid residues catalyzed by two water molecules

In the biological proteins, aspartic acid (Asp) residues are prone to nonenzymatic isomerization via a succinimide (Suc) intermediate. Asp-residue isomerization causes the aggregation and the insolubilization of proteins, and is considered to be involved in various age-related diseases. Although Suc intermediate was considered to be formed by nucleophilic attack of the main-chain amide nitrogen of N-terminal side adjacent residue to the side-chain carboxyl carbon of Asp residue, previous studies have shown that the nucleophilic attack is more likely to proceed via iminol tautomer when the water molecules act as catalysts. However, the full pathway to Suc-intermediate formation has not been investigated, and the experimental analyses for the Asp-residue isomerization mechanism at atomic and molecular levels, such as the analysis of the transition state geometry, are difficult. In the present study, we computationally explored the full pathways for Suc-intermediate formation from Asp residues. The calculations were performed two types of reactant complexes, and all energy minima and TS geometries were optimized using B3LYP density functional methods. As a result, the SI-intermediate formation was divided into three processes, i.e., iminolization, cyclization, and dehydration processes, and the activation energies were calculated to be 26.1 or 28.4 kcal mol−1. These values reproduce the experimental data. The computational results show that abundant water molecules in living organisms are effective catalysts for the Asp-residue isomerization.

Allergenicity of Deamidated and/or Peptide-Bond-Hydrolyzed Wheat Gliadin by Transdermal Administration.

Hydrochloric acid (HCl)-treated wheat protein (HWP) is widely used in various products, including foods, cosmetics and shampoos. Recently, immediate hypersensitivity towards facial soap containing HWP has been reported. HCl treatment of protein causes hydrolysis not only of main-chain amide bonds (peptide-bond hydrolysis) but also of side-chain ones (deamidation). We have already reported that gliadin, the main allergen in wheat, reduces allergenicity and increases digestibility by deamidation, indicating that deamidation and peptide-bond hydrolysis are effective to reduce the allergenicity of wheat protein. However, transdermally administered HWP is assumed to induce sensitization to orally administered wheat protein even in those who have been taking wheat products daily before sensitization. The present study was conducted to examine which structural change is responsible for the induction of cutaneous sensitization by comparing the allergenicity of deamidated and/or peptide-bond-hydrolyzed wheat gliadin. Because we have developed a deamidation method without causing peptide-bond hydrolysis, only deamidated wheat gliadin is available. Therefore, after deamidated-only, hydrolyzed-only, and deamidated and hydrolyzed gliadins were transdermally administered to mice for several weeks, the corresponding gliadin was intraperitoneally administered and allergenicity was evaluated. Transdermal administration of deamidated and hydrolyzed gliadin induced severe allergic reaction, while that of deamidated-only and hydrolyzed-only gliadin showed almost no allergic response. This result indicates that both deamidation and peptide-bond hydrolysis are necessary to increase the allergenic potency of transdermally administered wheat gliadin.

Structural Fingerprints of an Intact Monoclonal Antibody Acquired under Formulated Storage Conditions via 15N Direct Detection Nuclear Magnetic Resonance.

Noninvasive evaluation of tertiary structures is fundamental to the research, development, and use of the biologics. However, few methodologies are currently available for evaluating large molecular weight (MW) biologics, such as therapeutic monoclonal antibodies (mAbs; 150 kDa). Here, we have newly developed a 15N direct detection nuclear magnetic resonance (NMR) technique, the 15N direct detection CRINEPT, which allows the observation of the main chain amide resonances of a nondeuterated protein with MW 150 kDa. The technique not only substantially expands the range of proteins applicable to solution NMR studies but also allows the noninvasive structural analyses of intact mAbs in a wide range of temperature and solvent conditions. As a proof of principle, we successfully acquired the 15N-detected CRINEPT spectra of an intact mAb in its formulated solution at 4 °C. The technique was able to discriminate heterogeneous galactosylation states, demonstrating the benefit of high resolution of the 15N direct detection.

Asymmetric Open-Closed Dimer Mechanism of Polyhydroxyalkanoate Synthase PhaC.

SummaryBiodegradable polyester polyhydroxyalkanoate (PHA) is a promising bioplastic material for industrial use as a replacement for petroleum-based plastics. PHA synthase PhaC forms an active dimer to polymerize acyl moieties from the substrate acyl-coenzyme A (CoA) into PHA polymers. Here we present the crystal structure of the catalytic domain of PhaC from Chromobacterium sp. USM2, bound to CoA. The structure reveals an asymmetric dimer, in which one protomer adopts an open conformation bound to CoA, whereas the other adopts a closed conformation in a CoA-free form. The open conformation is stabilized by the asymmetric dimerization and enables PhaC to accommodate CoA and also to create the product egress path. The bound CoA molecule has its β-mercaptoethanolamine moiety extended into the active site with the terminal SH group close to active center Cys291, enabling formation of the reaction intermediate by acylation of Cys291.

Hydrogen Bonding in a l-Glutamine-Based Polyamidoamino Acid and its pH-Dependent Self-Ordered Coil Conformation.

This paper reports on synthesis, acid–base properties, and self-structuring in water of a chiral polyamidoamino acid, M-l-Gln, obtained from the polyaddition of N,N′-methylenebisacrylamide with l-glutamine, with the potential of establishing hydrogen bonds through its prim-amide pendants. The M-l-Gln showed pH-responsive circular dichroism spectra, revealing ordered conformations. Structuring was nearly insensitive to ionic strength but sensitive to denaturing agents. The NMR diffusion studies were consistent with a population of unimolecular nanoparticles thus excluding aggregation. The M-l-Gln had the highest molecular weight and hydrodynamic radius among all polyamidoamino acids described. Possibly, transient hydrogen bonds between l-glutamine molecules and M-l-Gln growing chains facilitated the polyaddition reaction. Theoretical modeling showed that M-l-Gln assumed pH-dependent self-ordered coil conformations with main chain transoid arrangements reminiscent of the protein hairpin motif owing to intramolecular dipole moments and hydrogen bonds. The latter were most numerous at the isoelectric point (pH 4.5), where they mainly involved even topologically distant main chain amide N–H and side chain amide C=O brought to proximity by structuring. Hydrogen bonds at pH 4.5 were also suggested by variable temperature NMR. The 2D NOESY experiments at pH 4.5 confirmed the formation of compact structures through the analysis of the main chain/side chain hydrogen contacts, in line with MD simulations.

A Novel Long-Range n to π* Interaction Secures the Smallest known α-Helix in Water.

The introduction of an amide bond linking side chains of the first and fifth amino acids forms a cyclic pentapeptide that optimally stabilizes the smallest known α-helix in water. The origin of the stabilization is unclear. The observed dependence of α-helicity on the solvent and cyclization linker led us to discover a novel long-range n to π* interaction between a main-chain amide oxygen and a uniquely positioned carbonyl group in the linker of cyclic pentapeptides. CD and NMR spectra, NMR and X-ray structures, modelling, and MD simulations reveal that this first example of a synthetically incorporated long-range n to π* CO⋅⋅⋅Cγ =Ο interaction uniquely enforces an almost perfect and remarkably stable peptide α-helix in water but not in DMSO. This unusual interaction with a covalent amide bond outside the helical backbone suggests new approaches to synthetically stabilize peptide structures in water.

Deamidation of Amino Acids on the Surface of Adeno-Associated Virus Capsids Leads to Charge Heterogeneity and Altered Vector Function.

Post-translational modification of the adeno-associated virus capsids is a poorly understood factor in the development of these viral vectors into pharmaceutical products. Here we report the extensive capsid deamidation of adeno-associated virus serotype 8 and seven other diverse adeno-associated virus serotypes, with supporting evidence from structural, biochemical, and mass spectrometry approaches. The extent of deamidation at each site depended on the vector's age and multiple primary-sequence and three-dimensional structural factors. However, the extent of deamidation was largely independent of the vector recovery and purification conditions. We demonstrate the potential for deamidation to impact transduction activity and, moreover, correlate an early time point loss in vector activity to rapidly progressing spontaneous deamidation at several adeno-associated virus 8 asparagines. We explore mutational strategies that stabilize side-chain amides, improving vector transduction and reducing the lot-to-lot molecular variability that presents a key concern in biologics manufacturing. This study illuminates a previously unknown aspect of adeno-associated virus capsid heterogeneity and highlights its importance in the development of these vectors for gene therapy.

Mechanism of Methanol Inhibition of Photosynthetic Water Oxidation As Studied by Fourier Transform Infrared Difference and Time-Resolved Infrared Spectroscopies.

Photosynthetic water oxidation is performed at the Mn4CaO5 cluster in photosystem II. In this study, we investigated the effect of methanol, an analogue of water, on the water oxidation reaction and its interaction site using Fourier transform infrared (FTIR) difference and time-resolved infrared (TRIR) spectroscopies. Flash-induced FTIR difference measurement of the S-state cycle showed that methanol decreases mainly the efficiency of the S3 → S0 transition. TRIR measurement further showed that methanol slowed the rates of the S2 → S3 and S3 → S0 transitions. FTIR difference spectra upon the S1 → S2 transition exhibited prominent methanol-induced changes in the amide I and II bands of the main chains, whereas little change was observed in the bands of carboxylate groups, histidine side chains, and a water network in the vicinity of the Mn4CaO5 cluster. Similar tendencies were also observed with ethanol and 2-propanol. The C-O stretching vibration of methanol was further identified in the S2-minus-S1 spectrum using 18O-labeled methanol. These results indicate that methanol and small alcohols are bound near the Mn4CaO5 cluster but with no direct interaction. They probably replace a water molecule in a water channel around the Mn4CaO5 cluster, possibly interacting with a main chain amide. It is thus suggested that this replacement of water with methanol or a small alcohol inhibits water/proton transfer during the S2 → S3 and S3 → S0 transitions, which in turn provides experimental support for the view that these two transitions involve the water uptake and proton release processes.

Combining H/D Exchange Mass Spectrometry and Computational Docking To Derive the Structure of Protein-Protein Complexes.

Protein-protein interactions are essential for biological function, but structures of protein-protein complexes are difficult to obtain experimentally. To derive the protein complex of the DNA-repair enzyme human uracil-DNA-glycosylase (hUNG) with its protein inhibitor (UGI), we combined rigid-body computational docking with hydrogen/deuterium exchange mass spectrometry (DXMS). Computational docking of the unbound protein structures provides a list of possible three-dimensional models of the complex; DXMS identifies solvent-protected protein residues. DXMS showed that unbound hUNG is compactly folded, but unbound UGI is loosely packed. An increased level of solvent protection of hUNG in the complex was localized to four regions on the same face. The decrease in the number of incorporated deuterons was quantitatively interpreted as the minimum number of main-chain hUNG amides buried in the protein-protein interface. The level of deuteration of complexed UGI decreased throughout the protein chain, indicating both tighter packing and direct solvent protection by hUNG. Three UGI regions showing the greatest decreases were best interpreted leniently, requiring just one main-chain amide from each in the interface. Applying the DXMS constraints as filters to a list of docked complexes gave the correct complex as the largest favorable energy cluster. Thus, identification of approximate protein interfaces was sufficient to distinguish the protein complex. Surprisingly, incorporating the DXMS data as added favorable potentials in the docking calculation was less effective in finding the correct complex. The filtering method has greater flexibility, with the capability to test each constraint and enforce simultaneous contact by multiple regions, but with the caveat that the list from the unbiased docking must include correct complexes.