mAh Cm-2 Research Articles

In-Situ Self-Respiratory Solid-to-Hydrogel Electrolyte Interface Evoked Well-Distributed Deposition on Zinc Anode for Highly Reversible Zinc-Ion Batteries.

The aqueous zinc-ion batteries (AZIB) have emerged as a promising technology in the realm of electrochemical energy storage. Despite its potential advantages in terms of safety, cost-effectiveness, and inherent safety, AZIB faces significant challenges. Issues attributed to unsupported thermodynamics and non-uniform potential distribution and deposition, present formidable obstacles that necessitate resolution. To tackle these challenges, a novel strategy adapting hybrid organic-inorganic in situ derived solid-to-hydrogel electrolyte interface (StHEI) has been developed from coordination reactions and self-respiratory process, establishing uniform diffusion channels by ion bridges and accelerating ion transport. Self-respiratory pattern of StHEI realized through in situ inorganic component conversion further prolongs the protecting duration, which effectively mitigates corrosion and passivation but enhance the mechanical properties of the StHEI measured through Young's modulus. This novel StHEI promotes well-distributed potential lines within the Helmholtz regions. Zn2+ are finally induced to deposit and nucleate in a compact, fine, and uniform manner. Asymmetrical batteries assembled with the modified Zn electrode and bare Zn exhibit exceptional stability over 3000 h (1 mA cm-2-0.5 mAh cm-2). The asymmetrical Cu//Zn cell achieved an outstanding average Coulombic efficiency (CE) of 99.6 % over 1200 cycles.

Engineering Triple-Phase Interfaces with Hierarchical Carbon Nanocages for High-Areal-Capacity All-Solid-State Li-S Batteries.

All-solid-state lithium-sulfur batteries (ASSLSBs) have garnered widespread attention due to their advantages of high energy density and enhanced safety. However, the typical composite structure composed of solid-state electrolyte (SE), discrete conducting carbon black, and microsized sulfur (μ-S) with long-range Li+/e- conducting path and huge volume changes, suffers from sluggish charge transport and severe electrochemical-mechanical failure. In this work, a unique hierarchical carbon nanocage (hCNC) is applied as a continuous conducting network where nanosized sulfur are confined. Due to the synergistic effects of multi-dimensional (particle, interface, and electrode) structural engineering, this new sulfur-carbon composite cathode (S@hCNC39) can achieve uniform distribution of sulfur and carbon, and efficiently constructs triple-phase interfaces, showing enhanced charge-carrier transport and improved electrochemical-mechanical stability. Remarkable cycling performance of 89% after 300 cycles at 0.2C at 30°C is realized in ASSLSBs assembled with S@hCNC39. Notably, ASSLSBs achieve an ultrahigh areal capacity of 9.95 mAh cm-2 with stable cycling at 60°C with high sulfur contents of 40% and high sulfur loadings of 6mg cm-2. These results provide critical insights into the design of rational sulfur-carbon composites and offer a viable approach to enhance the overall performance of ASSLSBs.

A Multifunctional Na2Se/Zn-Mn Skeleton Enables Processable and Highly Reversible Sodium Metal Anode.

The recent high-energy density sodium (Na) metal batteries (SMBs) are restricted by their processability, lifetime, and safety. These issues can be addressed by controlling the reactions at the Na metal by modifying the Na metal anode (SMA) with the sodiophilic hosts. Herein, a multifunctional Na2Se/Zn-Mn skeleton is introduced for SMA and fabricate a processable Na@Na2Se/Zn-Mn composite using repeated cold rolling/folding approach through the spontaneous reaction between Na metal and ZnMnSe alloy. This unique intermetallic composite has Zn and Mn metal sites for uniform deposition of Na, while Na2Se generates a stable SEI for rapid Na+ ion transport. It offers outstanding sodiophilicity, high processability, excellent mechanical strength, and high ionic conductivity due to the synergistic effect of multi-component, enabling stable Na plating/stripping at high current densities and areal capacities. An optimized Na2Se/Zn-Mn skeleton enables Na||Na symmetric cells to attain a high critical current density of 5.0mA cm-2 at 5.0 mAh cm-2 with an extended lifespan of 9000h at 1.0mA cm-2 at 1.0 mAh cm-2. Remarkably, when configured into a full cell with a Na3V2(PO4)3 cathode, the SMB displays an extended lifespan of 2000 cycles at 10 C and an impressive high-rate capacity of ≈61.6 mAh g-¹ at 30 C.

Understanding pillar chemistry in potassium-containing polyanion materials for long-lasting sodium-ion batteries.

K-containing polyanion compounds hold great potential as anodes for sodium-ion batteries considering their large ion transport channels and stable open frameworks; however, sodium storage behavior has rarely been studied, and the mechanism remains unclear. Here, using a noninterference KTiOPO4 thin-film model, the Na+ storage mechanism is comprehensively revealed by in situ/operando spectroscopy, aberration-corrected electron microscopy and density functional theory calculations. We find that incomplete K+/Na+ ion exchange occurs and eventually 0.15 K+ remains as a pillar to stabilize the tunnel structure. The pillar effect substantially maintains the volume change within 3.9%, much smaller than that of K+(Na+) insertion into KTiOPO4(NaTiOPO4) (9.5%; 5%), thus enabling 10,000 cycles. The powder electrode demonstrates comparable capacity and can work efficiently at commercial-level areal capacity of 2.47 mAh cm-2. The quasi-solid-state pouch cell with high safety under extreme abuse also manifests long-term cycling stability. This pillar chemistry will inspire alkali metal ion storage in hosts containing heterogeneous cations.

Metal-Hydroxide Organic Frameworks for Aqueous Nickel-Zinc Batteries.

Hydroxides exhibit a high theoretical capacity for energy storage by ion release and are often intercalated with anions to enhance the ion migration kinetics. In this study, a series of metal-hydroxide organic frameworks (MHOFs) are synthesized by intercalating aromatic organic linkers into hydroxides using I-M/Ni(OH)2 (where M = Co2+, Cu2+, Mg2+, Fe2+). The coordination environment and layer spacing (1.09 nm) of I-M/Ni(OH)2 are explored by X-ray absorption fine structure and cryo-electron microscopy. The intercalation nanostructure improves the conductivity of the hydroxides and facilitates Zn2+ migration by increasing the interlayer spacing, while enhancing the rate capability and cycling stability. Consequently, the I-Co/Ni(OH)2 material exhibites a satisfactory specific capacity of 0.35 mAh cm-2 at 3 mA cm-2 and a high peak power density of 6.78 mW cm-2. This study offers a novel perspective on the design of intercalated hydroxide and provides new insights into high-performance nickel-zinc batteres.

Electrolyte Design via Cation-Anion Association Regulation for High-Rate and Dendrite-Free Zinc Metal Batteries at Low Temperature.

Low-temperature zinc metal batteries (ZMBs) are highly challenged by Zn dendrite growth, especially at high current density. Here, starting from the intermolecular insights, we report a cation-anion association modulation strategy by matching different dielectric constant solvents and unveil the relationship between cation-anion association strength and Zn plating/stripping performance at low temperatures. The combination of comprehensive characterizations and theoretical calculations indicates that moderate ion association electrolytes with high ionic conductivity (12.09 mS cm-1 at -40 °C) and a stable anion-derived solid electrolyte interphase (SEI) jointly account for highly reversible and dendrite-free Zn plating/stripping behavior, resulting in high-rate and ultrastable cycle performance at low temperature. As a result, at -40 °C, Zn//Zn cells can stably cycle over 400 h at 5 mA cm-2 and 10 mAh cm-2 and Zn//Cu cells exhibit an exceptional average Coulombic efficiency (CE) of 99.91% for 1800 cycles at 1 mA cm-2 and 1 mAh cm-2. Benefiting from enhanced low-temperature Zn plating/stripping performance, Zn//PANI full cells stably operate for 12,000 cycles at 0.5A g-1 and 35,000 cycles at 5 A g-1. Impressively, at -60 °C, Zn//Cu cells still display a high average CE of 99.68% for 2000 cycles. This work underscores the crucial effect of cation-anion association regulation for high-rate and dendrite-free Zn metal anodes, deepening the understanding of intermolecular interaction insights for low-temperature electrolyte design.

Interdependence of Support Wettability - Electrodeposition Rate- Sodium Metal Anode and SEI Microstructure.

This study examines how current collector support chemistry (sodiophilic intermetallic Na2Te vs. sodiophobic baseline Cu) and electrodeposition rate affect microstructure of sodium metal and its solid electrolyte interphase (SEI). Capacity and current (6 mAh cm-2, 0.5-3 mA cm-2) representative of commercially relevant mass loading in anode-free sodium metal battery (AF-SMBs) are analyzed. Synchrotron X-ray nanotomography and grazing-incidence wide-angle X-ray scattering (GIWAXS) are combined with cryogenic ion beam (cryo-FIB) microscopy. Highlighted are major differences in film morphology, internal porosity, and crystallographic preferred orientation e.g. (110) vs. (100) and (211) with support and deposition rate. Within the SEI, sodium fluoride (NaF) is more prevalent with Te-Cu versus sodium hydride (NaH) and sodium hydroxide (NaOH) with baseline Cu. Due to competitive grain growth the preferred orientation of sodium crystallites depends on film thickness. Mesoscale modeling delineates the role of SEI (ionic conductivity, morphology) on electrodeposit growth and onset of electrochemical instability.

Electrolyte Design Enables Stable and Energy-Dense Potassium-Ion Batteries.

Free from strategically important elements such as lithium, nickel, cobalt, and copper, potassium-ion batteries (PIBs) are heralded as promising low-cost and sustainable electrochemical energy storage systems that complement the existing lithium-ion batteries (LIBs). However, the reported electrochemical performance of PIBs is still suboptimal, especially under practically relevant battery manufacturing conditions. The primary challenge stems from the lack of electrolytes capable of concurrently supporting both the low-voltage anode and high-voltage cathode with satisfactory Coulombic efficiency (CE) and cycling stability. Herein, we report a promising electrolyte that facilitates the commercially mature graphite anode (>3 mAh cm-2) to achieve an initial CE of 91.14 % (with an average cycling CE around 99.94 %), fast redox kinetics, and negligible capacity fading for hundreds of cycles. Meanwhile, the electrolyte also demonstrates good compatibility with the 4.4 V (vs. K+/K) high-voltage K2Mn[Fe(CN)6] (KMF) cathode. Consequently, the KMF||graphite full-cell without precycling treatment of both electrodes can provide an average discharge voltage of 3.61 V with a specific energy of 316.5 Wh kg-1-(KMF+graphite), comparable to the LiFePO4||graphite LIBs, and maintain 71.01 % capacity retention after 2000 cycles.

Difluorobenzene as an Antisolvent for Fluorinated Electrolyte to Achieve Unparalleled Cycle Life of Lithium Metal Battery.

Electrolytes play a crucial role in enhancing the cycling stability and overall lifespan of lithium metal batteries (LMBs). However, conventional electrolytes achieve ununiform and low ionic conductivity solid electrolyte interphase (SEI), leading to uncontrolled lithium dendrite growth and dead lithium formation, rendering them inadequate for meeting the performance of high energy density LMBs. Herein, a 1,2-difluorobenzene (1,2-dFBn) is introduced as antisolvent in fluorinated electrolyte which is composed of fluoroethylene carbonate (FEC) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). The low energy level of the lowest unoccupied molecular orbital (LUMO) and the high fluorine-donating ability of 1,2-dFBn jointly modify the solvation structure and electrode/electrolyte interphase chemistry. As a result, this simple electrolyte formulation enables the Li||Li symmetric cells exhibit remarkable stability, enduring 700 h of continuous cycling under 2 mA cm-2 and Li||Cu cell achieve an impressive average Coulombic efficiency (CE) of 99.76%. Moreover, the full cell assembled with electrochemically deposited lithium capacity of 5 mAh cm-2 and LiFePO4 (LFP) as cathode achieves exceptional performance, maintaining a discharge specific capacity of 134.9 mAh g-1 while retaining 95.1% capacity at 2C after 1000 cycles. This study offers a plausible ratio design for fluorinated electrolyte, which achieving high CE and long-life LMBs.

Biomineralization Inspired the Construction of Dense Spherical Stacks for Dendrite-Free Zinc Anodes.

Aqueous zinc-ion batteries (AZIBs) are considered to be one of the most promising energy storage systems due to their high degree of safety and low cost. However, the deposition of the uncontrolled zinc dendritic morphology on the surface of the Zn anode seriously reduces the cycle life of AZIBs. Herein, inspired by natural biomineralization, a uniform spherical zinc deposition is achieved via the addition of a biological macromolecule to the electrolyte. The proposed biological macromolecule makes Zn2+ undergo dense spherical deposition by regulating the relative growth rate of high-index planes of metal zinc, effectively avoiding the destruction from irregular zinc dendrites. The symmetric cell with the addition of such a biological macromolecule can be stably cycled for >3200 h at 1 mA cm-2 for 1 mAh cm-2. This work sheds light on expanding morphological regulation of metal deposition to spherical shapes for stable metal anodes in addition to a single-crystal plane control strategy.

Porous V2CTx MXene as a High Stability Zinc Anode Protective Coating.

Aqueous Zn batteries exhibit significant research potential owing to their environmental friendliness and high energy density. Nevertheless, the formation of dendrites on the zinc anode and the sluggish diffusion kinetics of zinc ions adversely affect the cycle life of zinc ion batteries. In this study, we employ porous V2CTx (MVMX) as a protective layer for the zinc anode. The uniform porous structure of MVMX promotes active site exposure and facilitates the transport of zinc ions. Remarkably, the Zn@Ti half-cell demonstrated an average CE of 99.7% in 1500 cycles. Furthermore, the Zn-Zn symmetric battery exhibited stable cycling for 1600 h at current densities of 5 mA cm-2 and 1 mAh cm-2. Additionally, the MVMX@Zn||V2O5 full cell exhibited a capacity of 198 mAh g-1 and retained a capacity of 124.75 mAh g-1 after 5000 cycles at 1 A g-1, demonstrating the potential of employing alternative MXenes for fabricating stable zinc anodes.

Tailoring-Orientated Deposition of Li2S for Extreme Fast-Charging Lithium-Sulfur Batteries.

Precipitation/dissolution of insulating Li2S has long been recognized as the rate-determining step in lithium-sulfur (Li-S) batteries, which dramatically undermines sulfur utilization at elevated charging rates. Herein, we present an orientated Li2S deposition strategy to achieve extreme fast charging (XFC, ≤15 min) through synergistic control of porosity, electronic conductivity, and anchoring sites of electrode substrate. Via magnesiothermic reduction of a zeolitic imidazolate framework, a nitrogen-doped and hierarchical porous carbon with highly graphitic phase was developed. This design effectively reduces interfacial resistance and ensures efficient sequestration of polysulfides during deposition, leading to (110)-preferred growth of Li2S nanocrystalline between (002)-dominated graphitic layers. Our approach directs an alternative Li2S deposition pathway to the commonly reported lateral growth and 3D thickening growth mode, ameliorating the electrode passivation. Therefore, a Li-S cell capable of charging/discharging at 5C (12 min) while maintaining excellent cycling stability (82% capacity retention) for 1000 cycles is demonstrated. Even under high S loading (8.3 mg cm-2) and low electrolyte/sulfur ratio (3.8 mL mg-1), the sulfur cathode still delivers a high areal capacity of >7 mAh cm-2 for 80 cycles.

Breaking Mass Transport Limit for Hydrogen Evolution-Inhibited and Dendrite-Free Aqueous Zn Batteries.

It is commonly accepted that batteries perform better at low current densities below the mass-transport limit, which restricts their current rate and capacity. Here, it is demonstrated that the performance of Zn metal electrodes can be dramatically enhanced at current densities and cut-off capacities exceeding the mass-transport limit by using pulsed-current protocols. These protocols achieve cumulative plating/stripping capacities of 11.0 Ah cm-2 and 3.8 Ah cm-2 at record-high current densities of 80 and 160 mA cm-2, respectively. The study identifies and understands the promoted (002)-textured Zn growth and suppressed hydrogen evolution based on the thermodynamics and kinetics of competing reactions. Furthermore, the over-limiting pulsed-current protocol enables long-life Zn batteries with high mass loading (29 mgcathode cm-2) and high areal capacity (7.9 mAh cm-2), outperforming cells using constant-current protocols at equivalent energy and time costs. The work provides a comprehensive understanding of the current-capacity-performance relationship in Zn plating/stripping and offers an effective strategy for dendrite-free metal batteries that meet practical requirements for high capacity and high current rates.

Achieving Stable Orientational Zinc Deposition for Reversible Zinc Anode through Supramolecular Anchoring Mechanism.

Aqueous zinc-ion batteries have been impeded by the hydrogen evolution reaction (HER), uncontrolled zinc dendrites, and side reactions on the Zn anode. In this work, a Zn-polyphenol supramolecular network is rationally designed for stabilizing Zn anodes (ZPN@Zn) even at high current density. Theoretical calculations and experiments show that the zinc-polyphenol supramolecular layer effectively inhibits the hydrogen evolution reaction by capturing water molecules through strong hydrogen bonding networks while also facilitating the rapid replenishment of Zn2+ ions at the interface through supramolecular anchoring. Additionally, it results in preferential deposition of Zn on the (002) plane, thereby contributing to nondendritic and highly reversible Zn plating/stripping behaviors even under high rates. Concomitantly, the ZPN@Zn achieves superior stability of nearly 1200 h at a high current density of 20 mA cm-2 and maintains a high CE efficiency of 99.86% after 3000 cycles at 1 mAh cm-2 and 5 mA cm-2. Remarkably, the full cell assembled with ZPN@Zn and NaV3O8 (NVO) endures 25 000 cycles at 20 A g-1, achieving an impressive performance for the realization of dendrite-free Zn anodes by supramolecular modulation.

Bubbling Chemical Vapors in Molten Metal toward XIV-Group Nanosheets.

Two-dimensional (2D) XIV-group nanosheets (germanene, silicene, and stannene) possess unique physical and chemical features promising in fields of electronics, energy storage, and conversions. However, preparing these nanosheets is challenging owing to their non van der Waals structure with strong chemical bonds inside. Herein, a bubbling chemical-vapor growth method is proposed to synthesize these XIV-group nanosheets by bubbling XIV-group-element chlorides in molten sodium. During the synthetic process, XIV-group materials are formed by the reaction of XIV-group element chlorides with strong reducing sodium, then nucleated, and finally isolated to 2D nanosheets in the gas-liquid interface. With the collapse of vapor bubbles and subsequent injection, 2D nanosheets are continuously produced. The nanosheets (Ge) possess a thickness of ∼3.8 nm and a lateral size of ∼2.0 μm. Combining with graphene, the hybrid and flexible films are obtained, delivering a volumetric specific capacity of 4785 mAh cm-3 and superior cycling stability (over 4000 cycles) in lithium-ion batteries.

Iodine/Chlorine Multi-Electron Conversion Realizes High Energy Density Zinc-Iodine Batteries.

Aqueous zinc-iodine (Zn-I2) batteries are promising energy storage devices; however, the conventional single-electron reaction potential and energy density of iodine cathode are inadequate for practical applications. Activation of high-valence iodine cathode reactions has evoked a compelling direction to developing high-voltage zinc-iodine batteries. Herein, ethylene glycol (EG) is proposed as a co-solvent in a water-in-deep eutectic solvent (WiDES) electrolyte, enabling significant utilization of two-electron-transfer I+/I0/I- reactions and facilitating an additional reversibility of Cl0/Cl- redox reaction. Spectroscopic characterizations and calculations analyses reveal that EG integrates into the Zn2+ solvation structure as a hydrogen-bond donor, competitively binding O atoms in H2O, which triggers a transition from water-rich to water-poor clusters of Zn2+, effectively disrupting the H2O hydrogen-bond network. Consequently, the aqueous Zn-I2 cell achieves an exceptional capacity of 987 mAh gI2 -1 with an energy density of 1278Wh kgI2 -1, marking an enhancement of ≈300 mAh g-1 compared to electrolyte devoid of EG, and enhancing the Coulombic efficiency (CE) from 68.2% to 98.7%. Moreover, the pouch cell exhibits 3.72 mAh cm-2 capacity with an energy density of 4.52 mWh cm-2, exhibiting robust cycling stability. Overall, this work contributes to the further development of high-valence and high-capacity aqueous Zn-I2 batteries.

Supramolecular Crystals based Fast Single Ion Conductor for Long-cycling Solid Zinc Batteries.

The solid polymer electrolytes (SPEs) used in Zn-ion batteries (ZIBs) have low ionic conductivity due to the sluggish dynamics of polymer segments. Thus, only short-range movement of cations is supported, leading to low ionic conductivity and Zn2+ transference (tZn2+). Zn-based supramolecular crystals (ZMCs) have considerable potential for supporting long-distance Zn2+ transport; however, their efficiency in ZIBs has not been explored. The present study developed a ZMC consisting of succinonitrile (SN) and zinc bis(trifluoromethylsulfonyl)imide (Zn(TFSI)2), with a structural formula identified as Zn(TFSI)2SN3. The ZMC has ordered three-dimensional tunnels in the crystalline lattices for ion conduction, providing high ionic conductivities (6.02 × 10-4 S cm-1 at 25 °C and 3.26 × 10-5 S cm-1 at -35 °C) and a high tZn2+ (0.97). We demonstrated that a Zn‖Zn symmetrical battery with ZMCs has long-term cycling stability (1200 h) and a dendrite-free Zn plating/stripping process, even at a high plating areal density of 3 mAh cm-2. The as-fabricated solid-state Zn battery exhibited excellent performance, including high discharge capacity (1.52 mAh cm-2), long-term cycling stability (83.6% capacity retention after 70000 cycles (7 months)), wide temperature adaptability (-30 to 50 °C) and fast charging ability.

Bi-Functional Agarose-Filled Porous Polysulfone Protective Layer for Dendrite-Free Zn Anode.

The uneven electric field and slow Zn2+ desolvation lead to rapid dendrite growth during Zn plating and stripping, which severely deteriorates the performance of Zn metal anodes (ZMAs) in Zn-ion batteries (ZIBs). Although polymer-based artificial protective (PBAP) layers are widely applied to homogenize the electric field of ZMAs, they often fail to promote the desolvation process that eventually induces Zn dendrite growth. Herein, a bi-functional protective layer, comprising a finger-like porous matrix of polysulfone (PSF) and a hydroxyl-rich filler of agarose (AG), is constructed to suppress Zn dendrite growth. COMSOL simulation demonstrates the ZMAs with bi-functional protective layers (Zn@PSF/AG) exhibit uniform electric field and Zn2+ distribution. Besides, the Zn@PSF/AG has both low desolvation energy and nucleation overpotential, effectively promoting the desolvation of Zn2+. Therefore, the Zn@PSF/AG symmetric cell exhibits excellent cycling performance, achieving 4200h at 1mA cm-2/1 mAh cm-2 and 1000h at 5mA cm-2/5 mAh cm-2. When coupling with ZnxV2O5 (ZnVO) cathode, the ZnVO‖Zn@PSF/AG full cell shows similarly high cycling stability, maintaining 72% of its capacity after 7000 cycles at 10 A g-1. This research highlights the positive roles of PBAP layer with multi-functional matrix-filler structure in developing long-life ZIBs.

A Quasi-Solid-State Polymer Lithium-Metal Battery with Minimal Excess Lithium, Ultrathin Separator, and High-Mass Loading NMC811 Cathode.

Solid-state batteries with lithium metal anodes are considered the next major technology leap with respect to today's lithium-ion batteries, as they promise a significant increase in energy density. Expectations for solid-state batteries from the automotive and aviation sectors are high, but their implementation in industrial production remains challenging. Here, we report a solid-state lithium-metal battery enabled by a polymer electrolyte consisting of a poly(DMADAFSI) cationic polymer and LiFSI in Pyr13FSI as plasticizer. The polymer electrolyte is infiltrated and solidified in the pores of a commercial LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode with up to 2.8 mAh cm-2 nominal areal capacity and in the pores of a 25 μm thin commercial polypropylene separator. Cathode and separator are finally laminated into a cell in combination with a commercial 20 μm thin lithium metal anode. Our demonstration of a solid-state polymer battery cycling at full nominal capacity employing exclusively commercially available components available at industrial scale represents a critical step forward toward the commercialization of a competitive all-solid-state battery technology.

Facile Electrodeposition Method for Constructing Li2S as Artificial Solid Electrolyte Interphase for High-Performance Li Metal Anode.

Designing current collectors and constructing efficient artificial solid electrolyte interphase (SEI) layers are promising strategies for achieving dendrite-free Li deposition and practical applications in Li metal batteries (LMBs). Electrodeposition is advantageous for large-scale production and allows the direct formation of current collectors without binders, making them immediately usable as electrodes. In this study, an adherent Cu2S thin-layer on Cu foil is synthesized through anodic electrodeposition from a Na2S solution in a one-step process, followed by the generation of Li2S layers as artificial SEI layers via a conversion reaction (3DLi2S-Cu foil). The Li2S layers move from the 3D Cu surface to the deposited Li surface, facilitating uniform and dense Li deposition. The 3DLi2S-Cu foil structure demonstrates stable cycling performance over 350 cycles in an asymmetric cell, with a capacity of 1 mAh cm-2 at 1 mA cm-2. Moreover, symmetric cells with 5 mAh cm-2 of deposited Li exhibit a stable cycle life for over 1200 h. When paired with commercial LiFePO4 (LFP), the full cells show substantially enhanced cyclability, regardless of the amount of deposited Li. This study provides new insights into the construction of artificial SEIs for facilitating commercial applications.