Magnetic Measurements Research Articles

Crystal structure and cryomagnetic study of a mononuclear erbium(III) oxamate inclusion complex.

The synthesis, crystal structure and magnetic properties of an oxamate-containing erbium(III) complex, namely, tetrabutylammonium aqua[N-(2,4,6-trimethylphenyl)oxamato]erbium(III)-dimethyl sulfoxide-water (1/3/1.5), (C16H36N)[Er(C11H12NO3)4(H2O)]·3C2H6OS·1.5H2O or n-Bu4N[Er(Htmpa)4(H2O)]·3DMSO·1.5H2O (1), are reported. The crystal structure of 1 reveals the occurrence of an erbium(III) ion, which is surrounded by four N-phenyl-substituted oxamate ligands and one water molecule in a nine-coordinated environment, together with one tetrabutylammonium cation acting as a counter-ion, and one water and three dimethyl sulfoxide (DMSO) molecules of crystallization. Variable-temperature static (dc) and dynamic (ac) magnetic measurements were carried out for this mononuclear complex, revealing that it behaves as a field-induced single-ion magnet (SIM) below 5.0 K.

Magnetic Measurements and Alignment Results of LQXFA/B Cold Mass Assemblies at Fermilab

Magnetic Measurements and Alignment Results of LQXFA/B Cold Mass Assemblies at Fermilab

Magnetic Field Measurement of Superconducting Transport Solenoid for COMET

Magnetic Field Measurement of Superconducting Transport Solenoid for COMET

Characteristics of Controlled Bridge Circuit and Its Application in Magnetic Field Induction Measurement

Characteristics of Controlled Bridge Circuit and Its Application in Magnetic Field Induction Measurement

Design of a High-Homogeneity 55 T Pulsed Magnet for High-Resolution Nuclear Magnetic Resonance Measurements

Design of a High-Homogeneity 55 T Pulsed Magnet for High-Resolution Nuclear Magnetic Resonance Measurements

Magnetometry in a diamond anvil cell using nitrogen vacancy centers in a nanodiamond ensemble.

The emerging field of optical magnetometry utilizing negative-charged nitrogen vacancy (NV-) centers provides a highly sensitive lab bench technique for spatially resolved physical property measurements. Their implementation in high pressure diamond anvil cell (DAC) environments will become common as other techniques are often limited due to the spatial constraints of the sample chamber. Apparatus and techniques are described here permitting for more general use of magnetic field measurements inside a DAC using continuous wave optical detected magnetic resonance in NV- centers in a layer of nanodiamonds. A microstrip antenna delivers a uniform microwave field to the DAC and is compatible with simple metal gaskets, and the sensor layer of deposited nanodiamonds allows for simple determination of the magnetic field magnitude for B in the 1-100G range. The ferromagnetic transition in iron at 18GPa is measured with the apparatus, along with its hysteretic response.

Self-Stacked 1T-1H Layers in 6R-NbSeTe and the Emergence of Charge and Magnetic Correlations Due to Ligand Disorder.

The emergence of correlated phenomena arising from the combination of 1T and 1H van der Waals layers is the focus of intense research. Here, we synthesize a self-stacked 6R phase in NbSeTe, showing perfect alternating 1T and 1H layers that grow coherently along the c-direction, as revealed by scanning transmission electron microscopy. Angle-resolved photoemission spectroscopy shows a mixed contribution of the trigonal and octahedral Nb bands to the Fermi level. Diffuse scattering reveals temperature-independent short-range charge fluctuations with propagation vector qCO = (0.25 0), derived from the condensation of a longitudinal mode in the 1T layer, while the long-range charge density wave is quenched by ligand disorder. Magnetization measurements suggest the presence of an inhomogeneous, short-range magnetic order, further supported by the absence of a clear phase transition in the specific heat. These experimental analyses in combination with ab initio calculations indicate that the ground state of 6R-NbSeTe is described by a statistical distribution of short-range charge-modulated and spin-correlated regions driven by ligand disorder. Our results demonstrate how natural 1T-1H self-stacked bulk heterostructures can be used to engineer emergent phases of matter.

Magnetic nanocomposite for lead (II) removal from water

A magnetic perovskite-spinel oxide nanocomposite synthesized through a sol–gel self-combustion process is used for the first time as an adsorbent to remove toxic heavy metals (i.e., Pb2+). The synthesized LaFeO3:CoFe2O4 ((LFO)1:(CFO)x) (x = 0.11–0.87) nanocomposites possess good stability, abundant oxygenated active binding sites, and unique structural features, making them suitable for removing divalent Pb2+ ions. Scanning electron microscopy, X-ray diffraction, BET surface area, magnetization measurements, zeta-potential analyses, and X-ray photoelectron spectroscopy were used to analyze the nanocomposites, and their structural changes after Pb2+ ions adsorption. Batch tests confirmed that (LFO)1:(CFO)x efficiently removes Pb2+ from water with a maximum adsorption capacity of 105.96 mg/g. The detailed quantitative study indicates that the interaction of hydroxyl groups with Pb2+ ions occurs through electrostatic interactions and complex formation. We also demonstrate a new ring-magnetic separator system that allows magnetic separation of the toxic ions at a higher speed compared to traditional block magnets. The unique structure, high porosity, large specific surface area, and oxygenated functional groups of (LFO)1:(CFO)x nanocomposites make them promising materials for removal of heavy metal ions and possibly other environmental pollutants. This study provides a new approach to preparing nanocomposites of magnetic spinel ferrites with perovskite oxides for environmental applications.

Highly Fluorescent π-Conjugated Azomethines and Divalent Metal Complexes as Antibacterial and Antibiofilm Nominees.

π-Conjugated azomethine ligands differing in the naphthalene or phenylmethane-centered core structure and their divalent cobalt, nickel, copper, and zinc metal complexes were prepared and well-characterized by spectral analyses in solid state. Magnetic natures of the complexes were determined by magnetic susceptibility measurements in solid-state. Their remarkable photophysical characteristics were recorded by Uv-vis and Fluorescence spectroscopic techniques. At their excitation wavelenght of 265 nm, all molecules exhibited triple fluorescence emission bands with promising intensities above 673 nm in near infra-red region. Antibacterial and antibiofilm activities of the π-conjugated azomethines are promising for potential applications in medical and healthcare settings. Hence, the antibacterial/antibiofilm activity of the π-conjugated azomethine ligands and their metal complexes against some clinically important bacteria namely Staphylococcus aureus (MSSA), Methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus epidermidis, Escherichia coli, Pseudomonas aeruginosa and Proteus mirabilis was investigated, and the obtained results have shown that the ligands and complexes had a remarkable antibacterial effect, especially on Proteus mirabilis. Metal complexes have been found to have a significant inhibitory effect on biofilm formation by MRSA, MSSA, and P. mirabilis compared to ligands. The copper (II) complex of ligand-2 showed the highest inhibition percentage, significantly reducing biofilm formation for MRSA and MSSA. Furthermore, cobalt (II) complexes of the ligands selectively inhibited the growth of the opportunistic pathogen P. mirabilis biofilms, indicating that metal complexes might be a good choice for future antibiofilm studies.

Design, synthesis, structural inspection, and DFT calculation of some novel imine ciprofloxacin metal chelates: A novel approach for pharmaceutical applications and DNA interaction

Novel compounds with pharmacological activity were synthesized from Pd (II), Fe (III), Cr (III), Ni (II), and Cu (II) ions with 4‐{2‐(3‐carboxy‐1‐cyclopropyl‐6‐fluoro‐7‐piperazin‐1‐yl‐2,3‐dihydro‐1H‐quinolin‐4‐ylideneamino)‐phenylimino}‐1‐cyclopropyl‐6‐fluoro‐7‐piperazin‐1‐yl‐1,4‐dihydro‐quinoline‐3‐carboxylic acid (CFPD). The newly synthesized compounds have been investigated by 1H‐ and 13C‐NMR spectra, Fourier transform infrared spectra, CHN analyses, ultraviolet‐visible spectra, mass spectra, molar conductivity, and magnetic moment measurements. In addition, the pH profile of the CFPD complexes showed remarkable stability, and their stability constant was identified in solution. To find out essential characteristics for CFPD and its complexes and to investigate the molecular geometry, computational analysis occurred. Through its nitrogen and OH of carboxylate groups, the ligand interacted with the metal ions to form CFPDPd complex with a square planar geometry and CFPDCu, CFPDCr, CFPDNi, and CFPDFe complexes with octahedral geometry. The M:L ratio of 1:1 was demonstrated by the molar ratio and sequence variation techniques’ outcomes. The effect of the investigated CFPD imine ligand on bacterial community and its metal chelate was examined within vitro using a range of fungal and viral pathogens The findings showed that the effectiveness of antimicrobial went with the directive: CFPDPd complex when compared to the highly suppressor complex, fluconazol and ofloxacin as model medication. The novel ligand’s and its complexes’ in vitro cytotoxic potential against the Hep‐G2, MCF‐7, and HCT‐116 cell lines was also studied. The findings once more indicated that, when compared to vinblastine medication, the CFPDPd chelate is the most active agent. In addition, the complexes showed high reactivity in catching free radicals when their antioxidant activity was examined. By the application of viscosity, spectrum analysis, and gel electrophoreses, the interaction among metal chelates and DNA was determined. Studies on viscosity and spectrophotometric titration showed that every substance in test is a strong DNA binder. Increased hydrophobic and electrostatic interactions between aromatic rings could be the cause of this. In conclusion, these complexes have the potential to be effective bioactive agents.

Topological Magneto-optical Effect from Skyrmions in Two-Dimensional Ferromagnets.

Skyrmions in two-dimensional (2D) magnetic materials are considered as ideal candidates for information carriers in next-generation spintronic devices. However, conventional methods for elucidating the physical properties of skyrmions have limited the development of skyrmions in diverse 2D magnetic material systems due to their requirements for electrical conductivity. To overcome this limitation, we propose to utilize an optical method (magneto-optical Kerr technique) to detect the skyrmions in 2D magnetic materials. Herein, the graphene/Fe3GeTe2/graphene vertical van der Waals (vdW) heterostructure devices are fabricated to generate stabilized skyrmions by applying out-of-plane current. In combination with magnetic circular dichroism measurements, we observe topological-reflective magnetic circular dichroism (T-RMCD) effects in Fe3GeTe2 flakes and attribute the peak-shaped component in T-RMCD to the annihilation of skyrmion magnetic domains. Notably, the T-RMCD signal can maintain up to a temperature as high as the Curie temperature of Fe3GeTe2 flakes (∼200 K). Our work provides a universal, contactless, and nondestructive approach for studying the physical properties of skyrmions in 2D vdW magnetic materials while adding another degree of freedom to the modulation of skyrmions.

Chemical pressure induced spin reorientation in the magnetic structure of Ca3Mn2−xSnxO7 ( x=0,0.03,0.05 )

The effect of partially substituting Tin (Sn) at the Manganese (Mn) site of Ca3Mn2O7 , viz. Ca3Mn2−xSnxO7 with x=0.03,0.05 , on its structural and magnetic properties have been investigated using synchrotron diffraction, neutron diffraction, and bulk magnetization measurements. It is observed that with a substitution of x=0.03 , the minor (≈8%) tetragonal ( I4/mmm ) structural phase that is present in the predominantly orthorhombic ( Cmc21 ) undoped Ca3Mn2O7 , completely disappears. The compounds order antiferromagnetically, the ordering temperature decreases with increasing Sn-content, indicating a weakening of the antiferromagnetic exchange interactions. Interestingly, in the ordered state, the spin magnetic moments which were aligned along the a-axis of the unit cell in the undoped compound, are observed to have reoriented with their major components lying in the b − c plane in the Sn-doped compounds. The above influence of Sn-doping is seen to be stemming from a significant modification of the octahedral rotation and tilt mode geometry in the unit cell, that is known to be responsible for driving ferroelectricity in these compounds.

Sex estimation using Magnetic Resonance Imaging measurements of hand and foot in Egyptian population

BackgroundThe identification of skeletal remains begins with a sex evaluation since other biological profile elements, such as size and age, are sex-specific. The pelvis is the favored element for sex assessment since it is very sexually dimorphic.Aim of the studyDelivering hand and foot bones sex estimate criteria for Egyptian population identification was the goal of this work.Subject and methodsEighty-two Egyptian adult subjects (41 males and 41 females) aged ≥ 21 years old were subjected to MRI scan on the right hand and foot to assess 9 measurements: hand length, hand width, four measurements of middle metacarpal bone (length, breadth, head breadth and base breadth), first metatarsal bone length, first metatarsal bone width and (first metatarsal bone length x first metatarsal bone width).ResultsAll the measured parameters in the right hand and foot were higher in males than females. First metatarsal bone length x first metatarsal bone width in the foot and middle metacarpal bone breadth in the hand were the most sexually dimorphic parameters, with accuracy of 86.6 percent and 84.1 percent, respectively. In stepwise discriminant analysis, three of nine measurements were selected: First metatarsal bone length x first metatarsal bone width, middle metacarpal bone breadth and hand width for the sex prediction equation in the Egyptian population, with a cross-validated sex classification accuracy of 90.2%.ConclusionSex can be assessed from hand and foot metric parameters measured by MRI with high accuracy.

In Situ Characterization of Metastable Pb3O5 and Pb2O3 Phases During Thermal Decomposition of PbO2 to PbO.

Nonstoichiometric lead oxides play a key role in the formation and cycling of the positive electrodes in a lead acid battery. These phases have been linked to the underutilization of the positive active material but also play a key role in the battery's cycle life, providing interparticle adhesion and the connection to the underlying lead grid. Similar phases have previously been identified by mass loss or color change during thermal annealing of PbO2 to PbO, suggesting that at least two intermediate PbOx phases exist. Using multiple, in situ analysis techniques (powder diffraction, X-ray absorption, X-ray photoelectron spectroscopy) and ex situ nuclear magnetic resonance measurements, the structural conversion and changes in the lead oxidation state were identified during this process. Isolation of the PbOx phases enabled confirmation of Pb3O5 and Pb2O3 by diffraction and the first 207Pb NMR measurement of these intermediates. The thermodynamic and kinetic stability of these intermediates and other reported polymorphs were determined by density functional theory, providing key insight into their origins and variation of PbOx structures found in previous studies.

Type-II superconductivity at 9K in Pb–Bi alloy

In the present work, we report the synthesis of Pb–Bi alloy with enhanced Tc of up to 9K, which is higher than that of Pb. The alloy is synthesized via a solid-state reaction route in the vacuum-encapsulated quartz tube at 700°C in an automated furnace. The synthesized sample is characterized by X-ray Diffraction(XRD) and Energy dispersive X-ray analysis(EDAX) for its phase purity and elemental composition. Rietveld refinement of XRD reveals that the end product is a majority hexagonal Pb7Bi3, with minor rhombohedral Bi. The electronic transport measurement shows metallic behavior with the Debye temperature of 108K and a superconductivity transition temperature (Tc) below 9K, which is the maximum to date for any reported Pb–Bi alloy, Pb or Bi at ambient pressure. Partial substitution of Bi at the Pb site may modify the free density of electronic states within the BCS model to attain the optimum Tc, which is higher by around 2K from the reported Tc of Pb. The superconductor phase diagram derived from magneto-transport measurements reveals that the synthesized alloy is a conventional superconductor with an upper critical field (Hc2) of 3.9 T, which lies well within the Pauli paramagnetic limit. The magnetization measurements carried out following ZFC(Zero Field Cool) protocols infer that the synthesized alloy is a bulk superconductor below 9K. The isothermal M-H(Magnetization vs. Field) measurements performed below Tc establish it as a type-II superconductor. The specific heat capacity measurements show that the Pb–Bi alloy is a strongly coupled bulk superconductor below around 9K with possibly two superconducting gaps.

Retraction Note: Plasma Magnetic Fluctuations Measurement on the Outer Surface of IR-T1 Tokamak

Retraction Note: Plasma Magnetic Fluctuations Measurement on the Outer Surface of IR-T1 Tokamak

Na2.64Mn1.64(MoO4)3 and Na2.62Ni1.69(MoO4)3: physicochemical investigations and electrochemical properties as 3.5 V class positive electrode material for Na-Batteries

Powders of two new mixed molybdates Na2.64Mn1.64(MoO4)3 (1) and Na2.62Ni1.69(MoO4)3 (2) have been prepared via a solid-solid reaction. They are isostructural, both crystallizing in monoclinic system (S. G.: C2/c), Z= 1, and the unit cell parameters a= 12.74109(18) Å, b= 13.69390(15) Å, c= 7.20028(8) Å, β= 112.4314(7) °, V= 1161.22(2) Å3 (1), and a= 12.6368(2) Å, b= 13.3633(2) Å, c= 7.08501(10) Å, β= 111.9248(10) °, V= 1109.91(3) Å3 (2). The structure consists of a 3D network of corners and edges sharing [MoO4] and [MO6] polyhedral, delimiting tunnels in which the Na ions partly site. The samples were investigated by powder X-ray diffraction, infrared spectroscopy, and scanning electron microscopy coupled to energy-dispersive X-ray spectroscopy (SEM-EDX). The vibrational study confirms the existence of the functional groups. Laser Raman spectroscopy showed that the tetrahedra in the two compounds are more regular, suggesting high symmetry for the compound. The as-synthesized compounds are fiber-like grains with an average length of 10–1 μm. FT-IR spectra showed the presence of all the functional groups present in the compounds. Magnetization measurements showed their paramagnetic behavior. The title compounds were characterized by cyclic voltammetry (CV), electrochemical performance and limiting factors are also applied as electrode material for Na-ion batteries at room temperature. Benefiting from these advantages, between 1.5 V and 4.6 V, (1) and (2) deliver high specific capacities of 230 and 160 mA h·g-1 after 60 cycles, and good rate performances, respectively. It can also be inferred that the prepared electrocatalyst showed for both phases excellent Hydrogen Evolution Reaction (HER) performance with an overpotential of 531 mV for Mn and 512 mV for Ni, required to afford a current density of 10 mA.cm-2.

Lower magnetic field measurement limit of the Coupled Dark State Magnetometer

Abstract The Coupled Dark State Magnetometer (CDSM) is an optically pumped magnetometer. For the Jupiter Icy Moons Explorer (JUICE) mission, the CDSM and two fluxgate magnetometers are combined in the J-MAG instrument to measure the static and low frequency magnetic field in the Jupiter system. During certain calibration manoeuvres, the CDSM has to be able to measure magnetic field strengths down to 100 nT with an accuracy of 0.2 nT (1 σ). At such low magnetic fields, the CDSM’s operational parameters must be carefully selected to obtain narrow resonance structures. Otherwise, the coupled dark state resonances, used for the magnetic field detection in different instrument modes, overlap and result in a systematic error. In this paper we demonstrate that with the found instrument settings the CDSM is able to measure magnetic field strengths below 100 nT with a systematic error less than 0.2 nT resulting from the overlap of the resonances.

New Regime of Inertial Alfvén Wave Turbulence in the Auroral Ionosphere

We investigate a new regime of inertial Alfvén wave turbulence observed in the very low beta plasma of the auroral ionosphere using electric and magnetic field measurements by the TRICE-2 sounding rocket. Combining the observed features of the electric and magnetic field frequency spectra with the linear properties of inertial Alfvén waves, we deduce the path of the anisotropic turbulent cascade through wave vector space. We find a critically balanced cascade through the magnetohydrodynamic scales of the inertial range down to the perpendicular scale of the plasma skin depth, followed by a parallel cascade to the ion inertial length. We infer damping of the cascade by a combination of proton cyclotron damping and electron Landau damping. Published by the American Physical Society 2024

Ferroelectricity‐Induced Surface Ferromagnetism in Core–Shell Magnetoelectric Nanoparticles

Magnetoelectric nanoparticles (NPs) present an important class of nanomaterials with a wide interest in piezocatalytic and biomedical applications. Herein, the results of magnetoelectric and magnetization measurements performed on core–shell NPs having magnetic core (MnFe2O4, MFO) and ferroelectric shell (Ba0.85Ca0.15Ti0.5Zr0.5O3, BCZT) synthesized by the microwave hydrothermal method are reported. Magnetic results are compared with the measurements on reference MFO NPs prepared under identical conditions. Detailed SQUID magnetometer measurements of the magnetization hysteresis loops M(H) down to 2 K reveal the existence of a clear exchange bias effect in pure MFO NPs attributed to the coexistence of ferromagnetic and antiferromagnetic short‐range interactions. When the magnetic core is covered by the thin ferroelectric BCZT shell, it is observed that 1) the shell suppresses the apparent bias effect and 2) induces an “extra” ferromagnetic magnetization at T < 20 K. The results indicate that this “extra” ferromagnetism has a 2D character and it is most likely related to the interface interactions between the MFO core and BCZT shell. Ferroelectric properties and strong magnetoelectric effect in core–shell NPs are revealed via piezoresponse force microscopy under magnetic field. The mechanisms of the observed effects are discussed.