Magnetic Resonance Linear Accelerator Research Articles

Study protocol: Optimising patient positioning for the planning of accelerated partial breast radiotherapy for the integrated magnetic resonance linear accelerator: OPRAH MRL

BackgroundAccelerated partial breast irradiation (APBI) is an accepted treatment option for early breast cancer. Treatment delivered on the Magnetic Resonance integrated Linear Accelerator (MRL) provides the added assurance of improved soft tissue visibility, important in the delivery of APBI. This technique can be delivered in both the supine and prone positions, however current literature suggests that prone treatment on the MRL is infeasible due to physical limitations with bore size. This study aims to investigate the feasibility of positioning patients on a custom designed prone breast board compared with supine positioning on a personalised vacuum bag. Geometric distortion, the relative position of Organs at Risk (OAR) to the tumour bed and breathing motion (intrafraction motion) will be compared between the supine and prone positions. The study will also investigate the positional impact on dosimetry, patient experience, and position preference.MethodsUp to 30 patients will be recruited over a 12-month period for participation in this Human Research Ethics Committee approved exploratory cohort study. Patients will be scanned on the magnetic resonance imaging (MRI) Simulator in both the supine and prone positions as per current standard of care for APBI simulation. Supine and prone positioning comparisons will all be assessed on de-identified MRI image pairs, acquired using appropriate software. Patient experience will be explored through completion of a short, anonymous electronic survey. Descriptive statistics will be used for reporting of results with categorical, parametric/non-parametric tests applied (data format dependent). Survey results will be interpreted by comparison of percentage frequencies across the Likert scales. Thematic content analysis will be used to interpret qualitative data from the open-ended survey questions.DiscussionThe results of this study will be used to assess the feasibility of treating patients with APBI in the prone position on a custom designed board on the MRL. It may also be used to assist with identification of patients who would benefit from this position over supine without the need to perform both scans. Patient experience and technical considerations will be utilised to develop a tool to assist in this process.Trial registration Australian New Zealand Clinical Trials Registry (ANZCTR): ACTRN1262400067583. Registered 28th of May 2024. https://www.anzctr.org.au/ACTRN12624000679583.aspx

Simultaneous implementation of unrelated tumour sites on the MR Linac: A review of the commissioning process from a radiographer perspective and lessons learned

IntroductionThis work reports on a systematic approach to select MRI sequences, quantify inter-observer image registration variation and determine patient positioning for the clinical implementation of MR-guided adaptive radiotherapy (MRgRT) in patients with oropharyngeal (H&N) and lung cancer. MethodsA total of 30 participants (N=10 H&N and N=10 lung cancer patients and N=10 healthy participants) were scanned on the Elekta Unity Magnetic Resonance Linear Accelerator (MRL). Participant experience questionnaires were used to determine the most appropriate positioning device for lung treatments and tolerability of H&N immobilization devices within the confined MR Linac environment. Visual guided assessments (VGAs) completed by three observers (one oncologist and two radiographers) were used to determine the most suitable tissue weighting (using vendor-provided 3D T1w and T2w sequences) for online image registration. Offline MRI to CT and MRI to MRI rigid registrations were undertaken by nine radiographers using bony and soft tissue matching. Single-factor ANOVA and paired t-tests were utilized to determine the interobserver variation. ResultsBased on oncologist and patient feedback, lung cancer patients would be treated in a vac-bag with their arms by their sides, while H&N cancer patients would be immobilized using a 5-point fixation device and 5-point personalized thermoplastic shell. There was no clear preference for T1w or T2w images in the H&N cohort. However, observers preferred T2w sequences for tumour and organ at risk (OAR) visualization in the lung images. When a bony match was conducted, single-factor ANOVA tests showed no statistically significant differences between all H&N image registration types (p=0.09). For the soft-tissue registrations, T1w-CT and T1w-T1w registrations showed a statistically significant (p=0.01) reduction in inter-observer variability over T2w-CT registrations. Paired t-tests showed no statistically significant differences for bony or soft tissue matches using T1w or T2w sequences to the planning CT in the lung cohorts (p=0.63 and p=0.52, respectively). ConclusionWe describe the systematic approach to the selection of strategies for imaging, immobilization, and online image registration we used for H&N and lung cancer treatments on the MRL. This has facilitated the selection of the most appropriate adaptive MRgRT strategies for treating these sites at our institution.

Artificial intelligence for treatment delivery: image-guided radiotherapy.

Radiation therapy (RT) is ahighly digitized field relying heavily on computational methods and, as such, has ahigh affinity for the automation potential afforded by modern artificial intelligence (AI). This is particularly relevant where imaging is concerned and is especially so during image-guided RT (IGRT). With the advent of online adaptive RT (ART) workflows at magnetic resonance (MR) linear accelerators (linacs) and at cone-beam computed tomography (CBCT) linacs, the need for automation is further increased. AI as applied to modern IGRT is thus one area of RT where we can expect important developments in the near future. In this review article, after outlining modern IGRT and online ART workflows, we cover the role of AI in CBCT and MRI correction for dose calculation, auto-segmentation on IGRT imaging, motion management, and response assessment based on in-room imaging.

Does a peer review group consensus process for MR-Linac patients affect clinical care? Evaluation of impact and feasibility

Background and purposePeer review is an important component of quality assurance in radiotherapy. To our knowledge, there are no studies reporting on the feasibility and outcomes of the peer review process for magnetic resonance (MR) guided radiotherapy (MRgRT) on the MR linear accelerator (MR-Linac) despite the planning complexity involved and its evolving clinical indications. This study aimed to quantify the rate of change in treatment plans post-peer review and the time and resources required. Materials and methodsFifty-five cases presented at weekly MR-Linac peer review meetings across two centres from 8 June to 21September 2023 were prospectively collected. Cases were analysed to determine the rate and extent of plan changes based on the Peer Review Audit Tool for radiation oncology (PRAT) developed by the Royal Australian and New Zealand College of Radiologists (RANZCR). ResultsPeer review resulted in changes to 36.4 % of treatment plans (n = 20), with 3.6 % (n = 2) having major changes requiring deferment of treatment. The most frequent changes were to organs at risk (OAR) volumes involving both delineation and increased OAR sparing (16.4 %, n = 9), total dose and fractionation (10.9 %, n = 6) and target volume dose coverage (5.5 %, n = 3). Patients with SBRT plans (39.1 % cf 22.2 %), oligometastatic/oligoprogressive sites (38.1 % cf 30.7 %) and reirradiation cases (41.2 % cf 34.2 %) had higher rates of change. Cases took a mean of 7 min (range 2–15 minutes) to discuss. ConclusionThe high rates of plan changes support the value of peer review in MRgRT. We recommend, where possible that all MRgRT cases, particularly those involving SBRT plans, oligometastatic/oligoprogressive sites, and/or reirradiation, be subject to peer review.

Recombination and polarity effects of Farmer chambers in a strong magnetic field

PurposeIonisation chamber based reference dosimetry in magnetic resonance linear accelerators (MRL) aimed for radiotherapy requires correction for recombination losses. Published studies have found that such corrections can be carried out using the two-voltage method. These studies have, however, not included comparison with recombination corrections based on the Niatel method, which can be seen as a robust reference method due to its clear separation of initial and volume recombination and its explicit account of the pulsed nature of the dose delivery. The primary objective of this work therefore was to carry out such a comparison. Materials and methodsFour Farmer-type chambers (PTW-30006 and PTW-30013) were placed in a water phantom in 1.5 T Elekta Unity MRL. The chambers were oriented antiparallel or perpendicular to the static magnetic field B0 and irradiated at a source-to-surface distance of 133.5 cm with a 10 × 10 cm2 field size. ResultsThe two-voltage method gave results in agreement (within 0.1%) with the recombination corrections derived from the Niatel method. The recombination corrections from three Niatel parameter sets (one based on a Varian Truebeam and two obtained directly in the MRL) deviated less than 0.1% from each other. A systematic shift in the recombination correction of less than 0.05% was observed if polarity corrections were not applied. ConclusionsThe study supports the use of the two-voltage method in MRLs based on its excellent agreement with the Niatel method. This work, therefore, complements existing knowledge as previous studies have not included a comparison with the Niatel method.

Feasibility of determining external beam radiotherapy dose using LuSy dosimeter.

Radiation dose measurement is an essential part of radiotherapy to verify the correct delivery of doses to patients and ensure patient safety. Recent advancements in radiotherapy technology have highlighted the need for fast and precise dosimeters. Technologies like FLASH radiotherapy and magnetic-resonance linear accelerators (MR-LINAC) demand dosimeters that can meet their unique requirements. One promising solution is the plastic scintillator-based dosimeter with high spatial resolution and real-time dose output. This study explores the feasibility of using the LuSy dosimeter, an in-house developed plastic scintillator dosimeter for dose verification across various radiotherapy techniques, including conformal radiotherapy (CRT), intensity-modulated radiation therapy (IMRT), volumetric-modulated arc therapy (VMAT), and stereotactic radiosurgery (SRS). A new dosimetry system, comprising a new plastic scintillator as the sensing material, was developed and characterized for radiotherapy beams. Treatment plans were created for conformal radiotherapy, IMRT, VMAT, and SRS and delivered to a phantom. LuSy dosimeter was used to measure the delivered dose for each plan on the surface of the phantom and inside the target volumes. Then, LuSy measurements were compared against an ionization chamber, MOSFET dosimeter, radiochromic films, and dose calculated using the treatment planning system (TPS). For CRT, surface dose measurement by LuSy dosimeter showed a deviation of -5.5% and -5.4% for breast and abdomen treatment from the TPS, respectively. When measuring inside the target volume for IMRT, VMAT, and SRS, the LuSy dosimeter produced a mean deviation of -3.0% from the TPS. Surface dose measurement resulted in higher TPS discrepancies where the deviations for IMRT, VMAT, and SRS were -2.0%, -19.5%, and 16.1%, respectively. The LuSy dosimeter was feasible for measuring radiotherapy doses for various treatment techniques. Treatment delivery verification enables early error detection, allowing for safe treatment delivery for radiotherapy patients.

Creating a Tool to Maximize Scheduling Efficiency on a Magnetic Resonance Linear Accelerator Unit

Creating a Tool to Maximize Scheduling Efficiency on a Magnetic Resonance Linear Accelerator Unit

AAPM Task Group 334: A guidance document to using radiotherapy immobilization devices and accessories in an MR environment.

Use of magnetic resonance (MR) imaging in radiation therapy has increased substantially in recent years as more radiotherapy centers are having MR simulators installed, requesting more time on clinical diagnostic MR systems, or even treating with combination MR linear accelerator (MR-linac) systems. With this increased use, to ensure the most accurate integration of images into radiotherapy (RT), RT immobilization devices and accessories must be able to be used safely in the MR environment and produce minimal perturbations. The determination of the safety profile and considerations often falls to the medical physicist or other support staff members who at a minimum should be a Level 2 personnel as per the ACR. The purpose of this guidance document will be to help guide the user in making determinations on MR Safety labeling (i.e., MR Safe, Conditional, or Unsafe) including standard testing, and verification of image quality, when using RT immobilization devices and accessories in an MR environment.

Convolutional LSTM model for cine image prediction of abdominal motion.

Objective.In this study, we tackle the challenge of latency in magnetic resonance linear accelerator (MR-Linac) systems, which compromises target coverage accuracy in gated real-time radiotherapy. Our focus is on enhancing motion prediction precision in abdominal organs to address this issue. We developed a convolutional long short-term memory (convLSTM) model, utilizing 2D cine magnetic resonance (cine-MR) imaging for this purpose.Approach.Our model, featuring a sequence-to-one architecture with six input frames and one output frame, employs structural similarity index measure (SSIM) as loss function. Data was gathered from 17 cine-MRI datasets using the Philips Ingenia MR-sim system and an Elekta Unity MR-Linac equivalent sequence, focusing on regions of interest (ROIs) like the stomach, liver, pancreas, and kidney. The datasets varied in duration from 1 to 10 min.Main results.The study comprised three main phases: hyperparameter optimization, individual training, and transfer learning with or without fine-tuning. Hyperparameters were initially optimized to construct the most effective model. Then, the model was individually applied to each dataset to predict images four frames ahead (1.24-3.28 s). We evaluated the model's performance using metrics such as SSIM, normalized mean square error, normalized correlation coefficient, and peak signal-to-noise ratio, specifically for ROIs with target motion. The average SSIM values achieved were 0.54, 0.64, 0.77, and 0.66 for the stomach, liver, kidney, and pancreas, respectively. In the transfer learning phase with fine-tuning, the model showed improved SSIM values of 0.69 for the liver and 0.78 for the kidney, compared to 0.64 and 0.37 without fine-tuning.Significance. The study's significant contribution is demonstrating the convLSTM model's ability to accurately predict motion for multiple abdominal organs using a Unity-equivalent MR sequence. This advancement is key in mitigating latency issues in MR-Linac radiotherapy, potentially improving the precision and effectiveness of real-time treatment for abdominal cancers.

Characterization of spatial integrity with active and passive implants in a low-field magnetic resonance linear accelerator scanner

Background and PurposeStandard imaging protocols can guarantee the spatial integrity of magnetic resonance (MR) images utilized in radiotherapy. However, the presence of metallic implants can significantly compromise this integrity. Our proposed method aims at characterizing the geometric distortions induced by both passive and active implants commonly encountered in planning images obtained from a low-field 0.35 T MR-linear accelerator (LINAC). Materials and MethodsWe designed a spatial integrity phantom defining 1276 control points and covering a field of view of 20x20x20 cm3. This phantom was scanned in a water tank with and without different implants used in hip and shoulder arthroplasty procedures as well as with active cardiac stimulators. The images were acquired with the clinical planning sequence (balanced steady-state free-precession, resolution 1.5x1.5x1.5 mm3). Spatial integrity was assessed by the Euclidian distance between the control point detected on the image and their theoretical locations. A first plane free of artefact (FPFA) was defined to evaluate the spatial integrity beyond the larger banding artefact. ResultsIn the region extending up to 20 mm from the largest banding artefacts, the tested passive and active implants could cause distortions up to 2 mm and 3 mm, respectively. Beyond this region the spatial integrity was recovered and the image could be considered as unaffected by the implants. ConclusionsWe characterized the impact of common implants on a low field MR-LINAC planning sequence. These measurements could support the creation of extra margin while contouring organs at risk and target volumes in the vicinity of implants.

Repeatability and reproducibility of prostate apparent diffusion coefficient values on a 1.5 T magnetic resonance linear accelerator

Background and PurposeIntegrated magnetic resonance linear accelerator (MR-Linac) systems offer potential for biologically based adaptive radiation therapy using apparent diffusion coefficient (ADC). Accurate tracking of longitudinal ADC changes is key to establishing ADC-driven dose adaptation. Here, we report repeatability and reproducibility of intraprostatic ADC using deformable image registration (DIR) to correct for inter-fraction prostate changes. Materials and MethodsThe study included within-fraction repeat ADC measurements for three consecutive fractions for 20 patients with prostate cancer treated on a 1.5 T MR-Linac. We deformably registered successive fraction T2-weighted images and applied the deformation vector field to corresponding ADC maps to align to fraction 2. We delineated gross tumour volume (GTV), peripheral zone (PZ) and prostate clinical target volume (CTV) regions-of-interest (ROIs) on T2-weighted MRI and copied to ADC maps. We computed intraclass correlation coefficients (ICC) and percent repeatability coefficient (%RC) to determine within-fraction repeatability and between-fraction reproducibility for individual voxels, mean and 10th percentile ADC values per ROI. ResultsThe ICC between repeats and fractions was excellent for mean and 10th percentile ADC in all ROIs (ICC > 0.86), and moderate repeatability and reproducibility existed for individual voxels (ICC > 0.542). Similarly, low %RC within-fraction (4.2–17.9 %) mean and 10th percentile ADC existed, with greater %RC between fractions (10.2–36.8 %). Higher %RC existed for individual voxel within-fraction (21.7–30.6 %) and between-fraction (32.1–34.5 %) ADC. ConclusionsResults suggest excellent ADC repeatability and reproducibility in clinically relevant ROIs using DIR to correct between-fraction anatomical changes. We established the precision of voxel-level ADC tracking for future biologically based adaptation implementation.

Beginning of clinical treatment using the 1.5 Tesla MR-Linac system in Japan: a narrative review.

In the field of radiation therapy, image-guided radiotherapy (IGRT) technology has been gradually improving and highly accurate radiation treatment has been possible. Research on IGRT using 1.5 Tesla magnetic resonance imaging (MRI) began in 1999, and a radiation therapy device called 1.5 Tesla magnetic resonance linear accelerator (MR-Linac), which combines a linear accelerator with 1.5 Tesla MRI, was developed in Europe. The aim of this review is to present an overview of 1.5 Tesla MR-Linac with a review of the literature and our experience. Reports related to 1.5 Tesla MR-Linac were searched for in PubMed and are discussed in relation to our experience. The 1.5 Tesla MR-Linac enables IGRT using 1.5 Tesla MRI, further enhancing the precision of radiation therapy. Position verification by cone-beam computed tomography (CBCT) is performed in many institutions, but soft tissue contrast is often unclear in CBCT images of the abdomen and mediastinal organs. Since the 1.5 Tesla MR-Linac allows position verification using MRI, position verification can be performed using clear MRI even in regions where CBCT is unclear. With the 1.5 Tesla MR-Linac, it is possible to perform online adaptive radiotherapy (ART) using 1.5 Tesla MRI. Online ART is a method in which images are acquired while the patient is on the treatment table. The method is based on the current condition of the organs in the body on that day and an optimal treatment field is recreated. Additionally, it allows monitoring of tumor motion using cine images obtained by 1.5 Tesla MRI during the delivery of X-ray radiation. A previous report showed that patients with prostate cancer who received radiotherapy by MR-Linac had fewer side effects than those in patients who received conventional CBCT radiation therapy. The 1.5 Tesla MR-Linac obtained CE-mark certification in Europe in August 2018 and it has been used for clinical treatment. In Japan, clinical treatment using this device started in 2021. By using 1.5 Tesla MR-Linac, patients can be provided with higher precision radiotherapy. In this review, we provide an overview of 1.5 Tesla MR-Linac.

Dose Calculation Accuracy of Beam Models in RadCalc for a 1.5 T MR-Linac

The purpose of this study is to evaluate RadCalc, an independent dose verification software, for patient-specific quality assurance (PSQA) in online adaptive planning with a magnetic resonance linear accelerator (MR-linac) of a 1.5 T. Version 7.1.4 of RadCalc to introduce the capability to establish a beam model that incorporates MR field characteristics. A total of six models were established, with one using manufacturer-provided data and the others differing in percentage depth dose (PDD) data sources. Overall, two models utilized PDD data from the treatment planning system (TPS), and three used commissioned PDD data from gantry angles of 0° and 270°. Simple tests on a virtual water phantom assessed dose-calculation accuracy, revealing percentage differences ranging from −0.5% to −20.6%. Excluding models with significant differences, clinical tests on 575 adaptive plans (prostate, liver, and breast) showed percentage differences of −0.51%, 1.12%, and 4.10%, respectively. The doses calculated using RadCalc demonstrated similar trends to those of the PSQA-based measurements. The newly released version of RadCalc enables beam modeling that considers the characteristics of the 1.5 T magnetic field. The accuracy of the software in calculating doses at 1.5 T magnetic fields has been verified, thereby making it a reliable and effective tool for PSQA in adaptive plans.

Developing a novel quasi-3D movable water phantom for radiation therapy workable in the magnetic resonance environment.

The use of magnetic resonance linear accelerators (MR-LINACs) for clinical treatment has opened up new possibilities and challenges in the field of radiation oncology. However, annual quality assurance (QA) is relatively understudied due to practical considerations. Thus, to overcome the difficulty of measuring the dose with a small water phantom for TRS-398 or TG-51 in all external beam radiation treatment unit environments, such as MR compatibility, we designed a remote phantom with a three-axis changeable capacity for QA. The designed water phantom was tested under an MR environment. The water phantom system comprised of three parts: a phantom box, a dose measurement tool, and a PMD401 drive system. The UNIDOSE universal dosimeter was used to collect beam data. The manufacturer's developer tools were utilized to position the measurement. To ensure magnetic field homogeneity, a distortion phantom was prepared using sixty fish oil capsules aligned radially to distinguish the oil and free air. The phantom was scanned in both the MR simulator and computed tomography (CT), and the acquired images were analyzed to determine the position shift. The dimensions of the device are 30 cm in the X-axis, 20 cm in the Y-axis, and 17 cm in the Z-axis. Total cost of materials was no more than $10,000 US dollars. Our results indicate that the device can function normally in a regular 1.5 T MR environment without interference from the magnetic field. The water phantom's traveling speed was found to be approximately 5 mm/s with a position difference confined within 6 cm intervals during normal use. The distortion test results showed that the prepared MR environment has uniform magnetic field homogeneity. In this study, we constructed a prototype water phantom device that can function in an MR simulator without interference between the magnetic field and electronic components. Compared to other commercially available MR-LINAC water phantoms, our device offers a more cost-effective solution for routine monthly QA. It can shorten the duration of QA tests and relieve the burden on medical physicists.

Development of a comprehensive cardiac atlas on a 1.5 Tesla Magnetic Resonance Linear Accelerator

Background and purposeThe 1.5 Tesla (T) Magnetic Resonance Linear Accelerator (MRL) provides an innovative modality for improved cardiac imaging when planning radiation treatment. No MRL based cardiac atlases currently exist, thus, we sought to comprehensively characterize cardiac substructures, including the conduction system, from cardiac images acquired using a 1.5 T MRL and provide contouring guidelines. Materials and methodsFive volunteers were enrolled in a prospective protocol (NCT03500081) and were imaged on the 1.5 T MRL with Half Fourier Single-Shot Turbo Spin-Echo (HASTE) and 3D Balanced Steady-State Free Precession (bSSFP) sequences in axial, short axis, and vertical long axis. Cardiac anatomy was contoured by (AS) and confirmed by a board certified cardiologist (JR) with expertise in cardiac MR imaging. ResultsA total of five volunteers had images acquired with the HASTE sequence, with 21 contours created on each image. One of these volunteers had additional images obtained with 3D bSSFP sequences in the axial plane and additional images obtained with HASTE sequences in the key cardiac planes. Contouring guidelines were created and outlined. 15–16 contours were made for the short axis and vertical long axis. The cardiac conduction system was demonstrated with eleven representative contours. There was reasonable variation of contour volume across volunteers, with structures more clearly delineated on the 3D bSSFP sequence. ConclusionsWe present a comprehensive cardiac atlas using novel images acquired prospectively on a 1.5 T MRL. This cardiac atlas provides a novel resource for radiation oncologists in delineating cardiac structures for treatment with radiotherapy, with special focus on the cardiac conduction system.

A randomized phase II trial of MR-guided prostate stereotactic body radiotherapy administered in 5 or 2 fractions for localized prostate cancer (FORT)

BackgroundUltra-hypofractionated regimens for definitive prostate cancer (PCa) radiotherapy are increasingly utilized due in part to promising safety and efficacy data complemented by greater patient convenience from a treatment course requiring fewer sessions. As such, stereotactic body radiation therapy (SBRT) is rapidly emerging as a standard definitive treatment option for patients with localized PCa. The commercially available magnetic resonance linear accelerator (MR-LINAC) integrates MR imaging with radiation delivery, providing several theoretical advantages compared to computed tomography (CT)-guided radiotherapy. MR-LINAC technology facilitates improved visualization of the prostate, real-time intrafraction tracking of prostate and organs-at-risk (OAR), and online adaptive planning to account for target movement and anatomical changes. These features enable reduced treatment volume margins and improved sparing of surrounding OAR. The theoretical advantages of MR-guided radiotherapy (MRgRT) have recently been shown to significantly reduce rates of acute grade ≥ 2 GU toxicities as reported in the prospective randomized phase III MIRAGE trial, which compared MR-LINAC vs CT-based 5 fraction SBRT in patients with localized PCa (Kishan et al. JAMA Oncol 9:365-373, 2023). Thus, MR-LINAC SBRT–utilizing potentially fewer treatments–is warranted and clinically relevant for men with low or intermediate risk PCa electing for radiotherapy as definitive treatment.Methods/DesignA total of 136 men with treatment naïve low or intermediate risk PCa will be randomized in a 1:1 ratio to 5 or 2 fractions of MR-guided SBRT using permuted block randomization. Randomization is stratified by baseline Expanded PCa Index Composite (EPIC) bowel and urinary domain scores. Patients undergoing 5 fractions will receive 37.5 Gy to the prostate over 10–14 days and patients undergoing 2 fractions will receive 25 Gy to the prostate over 7–10 days. The co-primary endpoints are GI and GU toxicities as measured by change scores in the bowel and urinary EPIC domains, respectively. The change scores will be calculated as pre-treatment (baseline) score subtracted from the 2-year score.DiscussionFORT is an international, multi-institutional prospective randomized phase II trial evaluating whether MR-guided SBRT delivered in 2 fractions versus 5 fractions is non-inferior from a gastrointestinal (GI) and genitourinary (GU) toxicity standpoint at 2 years post-treatment in men with low or intermediate risk PCa.Trial registrationClinicaltrials.gov identifier: NCT04984343. Date of registration: July 30, 2021.Protocol version: 4.0, Nov 8, 2022.

Validation of Hypoxia Detection Sequences on the MR Linac

Magnetic resonance linear accelerator (MRL) systems permit acquisition of novel imaging at the time of radiotherapy. A validated MR hypoxia imaging biomarker could select patients for adaptive radiotherapy with hypoxia modification or dose escalation. The aims of this study were (1) to develop a protocol for quantitative hypoxia sensitive MRI (2) to validate these in prostate cancer (PCa) against pimonidazole-stained prostatectomy sections. Blood oxygen level dependent (BOLD), intravoxel incoherent motion (IVIM), oxygen-enhanced (OE) and dynamic contrast enhanced (DCE) MRI were used. Sequences were developed on a diagnostic 1.5 T MR (MRD) and MRL with healthy volunteers and PCa patients. The Hyprogen trial includes men with localized PCa scheduled for prostatectomy. Imaging is acquired twice prior to surgery and oral pimonidazole is taken 8-16 hours before surgery. Whole prostate (WP) and dominant prostatic lesion (DIL) were outlined on T2-weighted (T2W) images and a 'normal prostate' (NP) volume created by subtracting DIL from WP. Contours were applied to parametric maps from the quantitative MRI, with median and IQR extracted. Patient-specific 3D-printed prostate molds were created from WP volumes and used to guide prostate whole organ dissection. Three of 20 patients recruited to date. MRI data were acquired successfully. A personalized prostate mold was produced for each patient and facilitated dissection of the prostatectomy specimen in a matching plane to MRI to validate hypoxia detection of the MR protocol. Correlation with pimonidazole staining is underway. Imaging parameter median values for NP and DIL acquired on MRD and MRL for the first patient are shown (Table 1). The expected differences between NP and DIL for T1 and D are seen and median values for T2* are consistent with reported values in the literature. The MR hypoxia protocol can be acquired safely and is well-tolerated on the MRL. Once validated against pimonidazole staining adaptive radiotherapy protocols will be developed to use this information.

Improvement in male pelvis magnetic resonance image contouring following radiologist-delivered training.

The magnetic resonance linear accelerator (MRL) combines both magnetic resonance imaging and a linear accelerator, allowing for daily treatment adaptation. This study aimed to assess the impact of radiologist-delivered training in magnetic resonance (MR) contouring of relevant structures within the male pelvis. Two radiation oncologists, two radiation oncology registrars and seven radiation therapists completed contouring on 10 male pelvis MR datasets both pre- and post-training. A 2-hour MR anatomy training session was delivered by a radiologist, who also provided the 'gold standard' contours. The pre- and post-training contours were compared against the gold standard with Dice similarity coefficient (DSC) and Hausdorff distances calculated; and the pre- and post-confidence scores and timing were compared. The improvement in DSC were significant in prostate, rectum and seminal vesicles, with a post-training median DSC of 0.87 ± 0.06, 0.92 ± 0.04 and 0.80 ± 0.14, respectively. The median Hausdorff improved with a median of 1.46 ± 0.78 mm, 0.52 ± 0.32 mm and 1.11 ± 0.86 mm for prostate, rectum and seminal vesicles, respectively. Bladder concordance was high both pre- and post-training. Urethra contours improved post-training, however, remained difficult to contour with a median post-DSC of 0.51 ± 0.24. Overall, confidence scoring improved (P < 0.001) and timing decreased by an average of 4.4 ± 16.4 min post-training. Radiologist-delivered training improved concordance of male pelvis contouring on MR datasets. Further work is required in the identification of urethra on MRs. These findings are of importance in the MRL adaptive workflow.

Towards simulation-free MR-linac treatment: utilizing male pelvis PSMA-PET/CT and population-based electron density assignments

Objective. This study aimed to investigate the dosimetric impact of using population-based relative electron density (RED) overrides in lieu of simulation computerized tomography (CT) in a magnetic resonance linear accelerator (MRL) workflow for male pelvis patients. Additionally, the feasibility of using prostate specific membrane antigen positron emission tomography/CT (PSMA-PET/CT) scans to assess patients’ eligibility for this proposed workflow was examined. Approach. In this study, 74 male pelvis patients treated on an Elekta Unity 1.5 T MRL were retrospectively selected. The patients’ individual RED values for 8 organs of interest were extracted from their simulation-CT images to establish population-based RED values. These values were used to generate individual (IndD) and population-based (PopD) RED dose plans, representing current and proposed MRL workflows, respectively. Lastly, this study compared RED values obtained from CT and PET-CT scanners in a phantom and a subset of patients. Results. Population-based RED values were mostly within two standard deviations of ICRU Report 46 values. PopD plans were comparable to IndD plans, with the average %difference magnitudes of 0.5%, 0.6%, and 0.6% for mean dose (all organs), D0.1cm 3 (non-target organs) and D95%/D98% (target organs), respectively. Both phantom and patient PET-CT derived RED values had high agreement with corresponding CT-derived values, with correlation coefficients ≥ 0.9. Significance. Population-based RED values were considered suitable in a simulation-free MRL treatment workflow. Utilizing these RED values resulted in similar dosimetric uncertainties as per the current workflow. Initial findings also suggested that PET-CT scans may be used to assess prospective patients’ eligibility for the proposed workflow. Future investigations will evaluate the clinical feasibility of implementing this workflow for prospective patients in the clinical setting. This is aimed to reduce patient burden during radiotherapy and increase department efficiencies.

Intra-frame motion deterioration effects and deep-learning-based compensation in MR-guided radiotherapy.

Current commercially available hybrid magnetic resonance linear accelerators (MR-Linac) use 2D+t cine MR imaging to provide intra-fractional motion monitoring. However, given the limited temporal resolution of cine MR imaging, target intra-frame motion deterioration effects, resulting in effective time latency and motion artifacts in the image domain, can be appreciable, especially in the case of fast breathing. The aim of this work is to investigate intra-frame motion deterioration effects in MR-guided radiotherapy (MRgRT) by simulating the motion-corrupted image acquisition, and to explore the feasibility of deep-learning-based compensation approaches, relying on the intra-frame motion information which is spatially and temporally encoded in the raw data (k-space). An intra-frame motion model was defined to simulate motion-corrupted MR images, with 4D anthropomorphic digital phantoms being exploited to provide ground truth 2D+t cine MR sequences. A total number of 10 digital phantoms were generated for lung cancer patients, with randomly selected eight patients for training or validation and the remaining two for testing. The simulation code served as the data generator, and a dedicated motion pattern perturbation scheme was proposed to build the intra-frame motion database, where three degrees of freedom were designed to guarantee the diversity of intra-frame motion trajectories, enabling a thorough exploration in the domain of the potential anatomical structure positions. U-Nets with three types of loss functions: L1 or L2 loss defined in image or Fourier domain, referred to as NNImgLoss-L1 , NNFloss-L1 and NNL2-Loss were trained to extract information from the motion-corrupted image and used to estimate the ground truth final-position image, corresponding to the end of the acquisition. Images before and after compensation were evaluated in terms of (i) image mean-squared error (MSE) and mean absolute error (MAE), and (ii) accuracy of gross tumor volume (GTV) contouring, based on optical-flow image registration. Image degradation caused by intra-frame motion was observed: for a linearly and fully acquired Cartesian readout k-space trajectory, intra-frame motion resulted in an imaging latency of approximately 50% of the acquisition time; in comparison, the motion artifacts exhibited only a negligible contribution to the overall geometric errors. All three compensation models led to a decrease in image MSE/MAE and GTV position offset compared to the motion-corrupted image. In the investigated testing dataset for GTV contouring, the average dice similarity coefficients (DSC) improved from 88% to 96%, and the 95th percentile Hausdorff distance (HD95 ) dropped from 4.8mm to 2.1mm. Different models showed slight performance variations across different intra-frame motion amplitude categories: NNImgLoss-L1 excelled for small/medium amplitudes, whereas NNFloss-L1 demonstrated higher DSC median values at larger amplitudes. The saliency maps of the motion-corrupted image highlighted the major contribution of the later acquired k-space data, as well as the edges of the moving anatomical structures at their final positions, during the model inference stage. Our results demonstrate the deep-learning-based approaches have the potential to compensate for intra-frame motion by utilizing the later acquired data to drive the convergence of the earlier acquired k-space components.