Magnetic Resonance Imaging Instrument Research Articles

Magnetic Resonance Imaging Guidance for Percutaneous Needle Intervention.

Magnetic resonance imaging (MRI) is one of the guiding modalities used for percutaneous needle insertion during interventional procedures. MRI guidance has several advantages, including multiplanar imaging capability, superior soft tissue contrast resolution, and the absence of ionizing radiation. When performing MRI-guided procedures, it is important to understand the suitable MRI systems, instruments, and imaging sequences for intervention. Furthermore, needle artifact characteristics must be fully understood to ensure safe and accurate needle insertion. In this article, we present the fundamental knowledge as regards the use of MRI guidance for percutaneous needle insertion and review its usefulness in representative interventional procedures, such as biopsy and tumor ablation.

Passive shimming of a 3T cryogen-free animal magnetic resonance imaging superconducting magnet with dense shim tray slots and small residual magnetic force.

Passive shimming is widely used in magnetic resonance imaging (MRI) systems due to its excellent efficacy and cost-effectiveness. However, conventional shim tray structures have difficulty in effectively adjusting magnetic field distributions under specific conditions. This limitation can lead to insufficient cancellation of harmonics and result in significant residual forces on the trays, impeding accurate placement of the trays. In this study, instead of using the conventional design of the shim tray slot, we propose a dedicated passive shimming tray tailored for 3T cryogen-free animal MRI superconducting magnets. Passive shimming experiments were conducted to evaluate the performance of this novel design, in which we were able to improve the peak-to-peak magnetic field homogeneity within the 180mm diameter imaging region, reducing peak-to-peak (p-p) variation from 349.35 ppm to 19.08 ppm. Furthermore, the p-p homogeneity of the magnetic field measured at the imaging area with a diameter of spherical volume (DSV) of 160mm reached 8.67 ppm. In addition, we strictly controlled the residual magnetic force of the shim tray to ensure its accurate placement. The experimental results indicate that the proposed structural optimization method and the residual magnetic force control strategy show potential in high-field MRI instruments requiring high homogeneity and handling of high residual magnetic force.

Nanoparticulated Bimodal Contrast Agent for Ultra-High-Field Magnetic Resonance Imaging and Spectral X-ray Computed Tomography.

Bimodal medical imaging based on magnetic resonance imaging (MRI) and computed tomography (CT) is a well-known strategy to increase the diagnostic accuracy. The most recent advances in MRI and CT instrumentation are related to the use of ultra-high magnetic fields (UHF-MRI) and different working voltages (spectral CT), respectively. Such advances require the parallel development of bimodal contrast agents (CAs) that are efficient under new instrumental conditions. In this work, we have synthesized, through a precipitation reaction from a glycerol solution of the precursors, uniform barium dysprosium fluoride nanospheres with a cubic fluorite structure, whose size was found to depend on the Ba/(Ba + Dy) ratio of the starting solution. Moreover, irrespective of the starting Ba/(Ba + Dy) ratio, the experimental Ba/(Ba + Dy) values were always lower than those used in the starting solutions. This result was assigned to lower precipitation kinetics of barium fluoride compared to dysprosium fluoride, as inferred from the detailed analysis of the effect of reaction time on the chemical composition of the precipitates. A sample composed of 34 nm nanospheres with a Ba0.51Dy0.49F2.49 stoichiometry showed a transversal relaxivity (r2) value of 147.11 mM-1·s-1 at 9.4 T and gave a high negative contrast in the phantom image. Likewise, it produced high X-ray attenuation in a large range of working voltages (from 80 to 140 kVp), which can be attributed to the presence of different K-edge values and high Z elements (Ba and Dy) in the nanospheres. Finally, these nanospheres showed negligible cytotoxicity for different biocompatibility tests. Taken together, these results show that the reported nanoparticles are excellent candidates for UHF-MRI/spectral CT bimodal imaging CAs.

On the passive shimming of a 7 T whole-body MRI superconducting magnet: Implementation with minimized ferromagnetic materials usage and operable magnetic force control.

Magnetic field shimming of the magnet is a routine practice in a magnetic resonance imaging (MRI) system. For clinically-used 1.5 T or 3 T MRI superconducting magnets, it is generally straightforward to achieve desired magnetic field uniformity with the passive shim technique. In comparison, superconducting shims with higher shimming efficiency are usually introduced in combination with passive shimming to satisfy the higher magnetic field uniformity requirement for ultrahigh field magnets (≥7 Tesla). However, superconducting shim usually involves a complex winding structure and low-temperature environment, bringing considerable engineering challenges and extra costs in practice. In this study, we aimed to improve the passive shimming method that can incorporate the unique electromagnetic properties of ultrahigh-field MRI magnets and is thus more effective for field corrections at 7T and above. In this work, we propose a dedicated passive shimming strategy for a 7 T whole-body MRI superconducting magnet. In this method, the iron usage and magnetic force due to the iron-field interaction are strictly managed to ensure a shim tray insert is operable by manpower (without specially designed tools). To validate the proposed shimming strategy, a shimming experiment was implemented on a 7 T/800mm superconducting magnet. Alternating with the odd and even shim trays in our two-round operation, the magnetic field inhomogeneity was successfully corrected from 85.36 to 7.91ppm, achieving the magnetic field quality elevation of more than one order of magnitude. The experimental results indicated that the proposed electromagnetic technology is expected to be effective for developing ultrahigh-field MRI instruments.

Harmonized Multisite MRI-Based Quantification of Human Liver Fat and Stiffness: A Pilot Study.

Nonalcoholic fatty liver disease (NAFLD) is a leading cause of end-stage liver disease. NAFLD diagnosis and follow-up relies on a combination of clinical data, liver imaging, and/or liver biopsy. However, intersite imaging differences impede diagnostic consistency and reduce the repeatability of the multisite clinical trials necessary to develop effective treatments. The goal of this pilot study was to harmonize commercially available 3 T magnetic resonance imaging (MRI) measurements of liver fat and stiffness in human participants across academic sites and MRI vendors. Cohort. Four community-dwelling adults with obesity. 1.5 and 3 T, multiecho 3D imaging, PRESS, and GRE. Harmonized proton density fat fraction (PDFF) and magnetic resonance spectroscopy (MRS) protocols were used to quantify the FF of synthetic phantoms and human participants with obesity using standard acquisition parameters at four sites that had four different 3 T MRI instruments. In addition, a harmonized magnetic resonance elastography (MRE) protocol was used to quantify liver stiffness among participants at two different sites at 1.5 and 3 T field strengths. Data were sent to a single data coordinating site for postprocessing. Linear regression in MATLAB, ICC analyses using SAS 9.4, one-sided 95% confidence intervals for the ICC. PDFF and MRS FF measurements were highly repeatable among sites in both humans and phantoms. MRE measurements of liver stiffness in three individuals at two sites using one 1.5 T and one 3 T instrument showed repeatability that was high although lower than that of MRS and PDFF. We demonstrated harmonization of PDFF, MRS, and MRE-based quantification of liver fat and stiffness through synthetic phantoms, traveling participants, and standardization of postprocessing analysis. Multisite MRI harmonization could contribute to multisite clinical trials assessing the efficacy of interventions and therapy for NAFLD. 2 TECHNICAL EFFICACY STAGE: 2.

New challenges and opportunities for low-field MRI

In this manuscript we deal with recent advances in low-field Magnetic Resonance Imaging (MRI). The development of low-cost MRI solutions allowing portability and trustable diagnosis is a hot topic worldwide by these days. We analyze basic technical issues of recent examples of fixed-field instruments operating at low-field. Then we discuss pros and cons of the pre-polarized approach, from both physical and technical perspectives. Permanent magnet and electromagnet technology are confronted. Finally, magnetic field-cycling is introduced as an alternative MRI technique, where field-dependent experiments can be exploded for the development of new contrast mechanisms that are not feasible for fixed-field MRI instruments. As field cycled machines usually deals with switched currents in electromagnets, magnetic field instability and inhomogeneity are the main limiting factors affecting image quality. We finalize this manuscript discussing how it turns possible to overcome these limitations, thus opening new possibilities for the development of cost effective MRI technology.

Differences in apparent diffusion coefficients between normal brain echo-planar images and turbo spin-echo diffusion-weighted images with distortion correction

PurposeWe performed echo-planar imaging (EPI) and turbo spin-echo (TSE) diffusion-weighted imaging (DWI) using magnetic resonance imaging (MRI) to obtain basic clinical data of the apparent diffusion coefficient (ADC) in various parts of normal brains and compared the datasets using our retrospective distortion correction technique. Materials and methodsThe normal brains of 32 patients who underwent health check were scanned on a 1.5-T MRI instrument using EPI- and TSE-DWI. Distortion was corrected by (1) segmentation: the b0 images were segmented based on the plural threshold values; (2) edge detection: the edge was detected in the images obtained in step (1); (3) non-rigid image registration: non-rigid image registration using Demons algorithm was achieved between the b0 images of EPI-DWI and TSE-DWI, thereby, creating a displacement field; and (4) image warp: the displacement field was applied to the b1000 image to warp. Twenty-six parts of the brain were measured from the images of b0 and b1000 and the ADCs were calculated. The signal-to-noise ratio (SNR) of the cerebrospinal fluid was measured to identify the cause of the difference between the two sequences. These were compared using Wilcoxon signed-rank test (P = 0.05). ResultsThe ADC was significantly higher measured by EPI-DWI than by TSE-DWI. The SNR of EPI-DWI was significantly higher than that of the TSE-DWI. ConclusionCare must be taken when measuring ADCs near the base of the skull, such as the brain stem, where the SNR of the imaging technique is likely to decrease or distort.

The dynamic viscoelastic characterisation and magnetic resonance imaging of poly(vinyl alcohol) cryogel: Identifying new attributes and opportunities

Poly(vinyl alcohol) (PVA) cryogel is a biocompatible, synthetic hydrogel, compatible with magnetic resonance (MR) imaging. It is widely used as a biomaterial in tissue scaffolds and mimics to test various diagnostic techniques. The aim of this study is to characterise the effect of varying PVA concentration, molecular weight (MW) and manufacturing protocol on the viscoelastic mechanical properties and MR T2 relaxation time. Further to this MR imaging (MRI) was investigated as a method to quantify material homogeneity. Cylindrical samples of PVA, of varying MW, concentration and number of freeze thaw cycles (FTCs), were manufactured. Dynamic mechanical analysis was performed to evaluate the storage and loss moduli between frequencies of 0.5 and 10 Hz. MR T2 relaxation maps were imaged using a 7 T MRI instrument. Storage and loss moduli were shown to increase with MW, concentration, or the number of FTCs; with storage modulus ranging from 55 kPa to 912 kPa and loss modulus ranging from 6 kPa to 103 kPa. MR T2 relaxation time was shown to increase linearly with PVA concentration. The qualitative and quantitative heterogeneity of the PVA sample were identified through MR T2 relaxation time maps. Excitingly, PVA demonstrated a composition-dependent casual correlation between the viscoelastic mechanical properties and MR T2 relaxation time. In conclusion, this research thoroughly characterised the viscoelastic mechanical properties of PVA to support its extensive use as a biomaterial, and demonstrated the use of MRI to non-invasively identify sample heterogeneity and to predict the composition-dependent viscoelastic properties of PVA.

Current Status in Building a Compact and Mobile HTS MRI Instrument

Magnetic Resonance Imaging (MRI) is an indispensable tool in monitoring lipid-rich tissues and the musculoskeletal system. It however requires maintaining a huge homogeneous (1 to 7 T) field. That is where superconductors come into play since they are the only feasible way to create such fields. The state-of-the-art technology utilizes low critical temperature superconductors (LTS) which require cooling down to liquid helium temperatures (4.2K). The new generation superconductors, aka the high critical temperature superconductors (HTS), can operate up to relatively elevated temperatures (technically above 100K's). In addition to that, they can withstand larger magnetic field strengths which can theoretically go up to the order of hundred Teslas in magnitude. It is evident that LTS wires of current MRI magnet technology is at their limits and new pursuits such as reaching higher fields and reducing operational/maintenance costs are in the favor of HTS tapes. There is, in fact, another advantage beyond minimization of the cryogenic costs, namely the compactness of the overall system. Utilizing certain auxiliary techniques such as flux pumping and conductive cooling of the tapes, MRI magnets can be reduced in size substantially. That, in turn, enables constructing much smaller thus mobile MRI scanners which can be brought to patients' doorsteps. Here we present the current status of our project aiming to build an HTS MRI machine dedicated to use as a mobile head scanner.

Examining the effect of online advertisement cues on human responses using eye-tracking, EEG, and MRI

This study sought to emphasize how disciplines such as neuroscience and marketing can be applied in advertising and consumer behavior. The application of neuroscience methods in analyzing and understanding human behavior related to the Elaboration Likelihood Model (ELM) and brain activity has recently garnered attention. This study examines brain processes while participants attempted to elicit preferences for a product, and demonstrates factors that influence consumer behavior using eye-tracking, electroencephalography (EEG), and magnetic resonance imaging (MRI) from a neuroscience approach. We planned two conditions of online advertising, namely, peripheral cues without argument and central cues with argument strength. Thirty respondents participated in the experiment, consisting of eye-tracking, EEG, and MRI instruments to explore brain activity in central cue conditions. We investigated whether diffusion tensor imaging (DTI) analysis could detect regional brain changes. Using eye-tracking, we found that the responses were mainly in the mean fixation duration, number of fixations, mean saccade duration, and number of saccade durations for the central cue condition. Moreover, the findings show that the fusiform gyrus and frontal cortex are significantly associated with building a relationship by inferring central cues in the EEG assay. The MRI images show that the fusiform gyrus and frontal cortex are significantly active in the central cue condition. DTI analysis indicates that the corpus callosum has changed in the central cue condition. We used eye-tracking, EEG, MRI, and DTI to understand that these connections may apprehend responses when viewing advertisements, especially in the fusiform gyrus, frontal cortex, and corpus callosum.

Magnetic resonance imaging: progresses and perspective

Magnetic resonance imaging (MRI) as one of the most important imaging methods is widely used in clinical diagnosis and basic life science research, with advantages including noninvasiveness, high/multiple soft tissue contrast, parametric imaging and the richness of information. During recent years, there have been many advances in the instrument technology and biomedical application of MRI. Advanced techniques, such as ultra-high field, ultra-fast and ultra-sensitive imaging, are now available for routine clinical usage and research settings. Also, the MRI technology is rapidly developing via incorporating with multiple cutting-edge disciplines including big data technology, artificial intelligence and theranostics. Currently, MRI is playing an indispensable role in tumor molecular imaging, functional brain imaging and brain connectome studies. This paper introduces the history and basic principles of MRI, and summarizes the important problems in the research of MRI instrument, methodology and application, providing a perspective on the directions of future MRI research in China.

Magnetic Resonance Imaging System–Driven Medical Robotics

Magnetic resonance imaging (MRI) system–driven medical robotics is an emerging field that aims to use clinical MRI systems not only for medical imaging but also for actuation, localization, and control of medical robots. Submillimeter scale resolution of MR images for soft tissues combined with the electromagnetic gradient coil–based magnetic actuation available inside MR scanners can enable theranostic applications of medical robots for precise image‐guided minimally invasive interventions. MRI‐driven robotics typically does not introduce new MRI instrumentation for actuation but instead focuses on converting already available instrumentation for robotic purposes. To use the advantages of this technology, various medical devices such as untethered mobile magnetic robots and tethered active catheters have been designed to be powered magnetically inside MRI systems. Herein, the state‐of‐the‐art progress, challenges, and future directions of MRI‐driven medical robotic systems are reviewed.

In-situ observation for natural gas hydrate in porous medium: Water performance and formation characteristic

Extensive efforts have been made regarding gas hydrate sample reconstruction in the laboratory for a better understanding and development of natural gas resources. Magnetic resonance imaging (MRI) is a useful method for directly observing the reconstruction of methane hydrate, yet relevant studies remain limited. In this study, a 9.4-T 400-MHz MRI instrument was employed to investigate CH4 hydrate formation in porous media involving various initial water saturation levels and sand diameters. Pressure histories and MRI signal variations were monitored to discuss the process of CH4 hydrate growth, and the three main formation stages of induction, rapid growth, and slow formation were determined. Furthermore, the liquid water performance in MRI micro-images was analyzed to predict the characteristics of CH4 hydrate formation. The results indicated that CH4 hydrate formed in a spatially and temporally random manner and that pore plugging occurred owing to the residual water encased in grown hydrate. Additionally, phase saturations, water conversion percentages, and formation rates were defined to evaluate the effect of sand diameter and initial water saturation on CH4 hydrate formation. With the reduction in the diameter of quartz glass beads from 400 μm to 100 μm, the average hydrate formation rate increased from 0.0010 min−1 to 0.0034 min−1, respectively. When the initial water saturation decreased to the optimized value (0.22 in this study), the water conversion percentage and hydrate saturation increased.

Intravoxel Incoherent Motion Diffusion Weighted Imaging for the Therapeutic Response of Transarterial Chemoembolization for Hepatocellular Carcinoma

Background: Intravoxel incoherent motion diffusion weighted imaging (IVIM-DWI) can not only observe the diffusion of tissue water molecules but also reflect the blood perfusion information of tissue microcirculation. IVIM-DWI has been applied in many clinical areas. However, few studies have addressed the use of IVIM-DWI for the evaluation of transarterial chemoembolization (TACE) response in hepatocellular carcinoma (HCC) patients. Objectives: The purpose of the present study was to explore the role of IVIM-DWI for the therapeutic response of TACE for HCC. Materials and Methods: Twenty patients underwent IVIM-DWI scan on a 3.0T magnetic resonance imaging instrument 1 - 3 days before and 30 to 40 days after TACE. The values of IVIM-DWI parameters, including standard apparent diffusion coefficient (ADC), pure diffusion coefficient (Dslow), pseudo-diffusion coefficient (Dfast) and perfusion fraction (f) were measured. The values of IVIM-DWI parameters before and after TACE were compared using paired t tests. The values between responsive and non-responsive groups were compared using independent-samples t test. P 0.05 indicated statistical significance. Results: After TACE, the ADC and Dslow values in the tumors increased significantly, and the values of Dfast decreased significantly, while the values of f value did not change obviously. The ADC values in responsive group were remarkably higher than those in non-responsive group, the Dfast values in responsive group were significantly lower than those in non-responsive group, but the values of Dslow and f between the two groups were not different significantly. Conclusions: IVIM-DWI parameters can be used as potential markers for the therapeutic response of TACE for HCC.

Rare Earth Element fluxes over 15 years into a major European Estuary (Garonne-Gironde, SW France): Hospital effluents as a source of increasing gadolinium anomalies

New and rapidly developing technologies imply the emission of emerging potentially toxic contaminants such as Rare Earth Elements (REEs). Yet, the lithology-derived quantities and anthropogenic contributions, especially from urban areas, to annual REE fluxes into fluvial-estuarine systems remain widely unknown. The Garonne River drains water from ~20% of the French land surface hosting about 5,200,000 inhabitants and two large cities. Based on long-term monitoring (2003–2017) of water discharges and dissolved REEs concentrations at the outlet of the Garonne Watershed upstream from Bordeaux, this study aims at assessing REE anomalies and evaluating temporal evolution of annual dissolved REE fluxes into the Gironde Estuary. Additionally, potential urban sources (e.g. domestic, medical) in the urban area of Bordeaux (1,190,000 inhab.) were analyzed to evaluate respective signatures and contributions. Gadolinium (Gd) showed clear anomalies in all samples, with annual average anthropogenic concentrations ranging from 1.8 to 7.2 ng·L−1 (0.011 to 0.046 nmol·L−1) in the Garonne River. If variations in annual Gd fluxes depend on hydrology, anthropogenic Gd fluxes have shown an overall increasing trend from 32 kg·year−1 (204 mol·year−1) in 2003 to 75 kg·year−1 (475 mol·year−1) in 2017. Sewer waters from the third largest hospital complex of France, the hospital group Pellegrin, contributed 25% to the incoming daily Gd flux into Bordeaux major Waste Water Treatment Plant (WWTP), owed to Gd use as contrast agent for Magnetic Resonance Imaging (MRI). Due to weak removal efficiency in the WWTP, the Bordeaux Metropole significantly contributes (>27 kg·year−1; 172 mol·year−1) to Gd fluxes in the Gironde Estuary. The temporal evolution of anthropogenic Gd fluxes in the Garonne River may be related with the growing regional population and the increasing number of MRI instruments, highlighting the importance of new high-tech applications in urban areas on contaminant fluxes and their potential harmful effects in fluvial-estuarine systems in the future.

Fiber-based optic sensor for detecting human blood clot: present and future revival

Sustaining human’s life-frame away from being impeded by the clot - ghost term, we attempt to approach a mobile fiber-based optical sensor (f-s) for detecting blood clot in a blood vessel (intra-arteries/veins). Blood vessels are the part of the circulatory system that transport blood throughout the human body, thus their significance of being protected arise to the monograph focus. MRI (magnetic resonance imaging), X-rays and other medical instruments are diagnostic immobility techniques with a slackest interval. The corer causation of fiber-based optical sensor is to detect a clump of blood in the bloodstream by providing a prompt mobile diagnostic intervals preserving last-minutes-breath of human’s life. The detector (f-s) has been etched by diluting sulphuric acid ~10% at certain zone to sensate its function. The in-vitro monograph peaks its maximal monitoring when the sensor is attached to Raman Spectroscopy (RS) setup. RS quantifies the relative intensities of fibrinogen bond, which is the first type of blood coagulation elements of blood plasma. Blood coagulation parameters are the major concern of the monograph investigation, such as total haemoglobin (tHb), clotting reaction time (t), clot progression time (t2), maximum clot amplitude (ma) and mean refractive index (r). A blood sample will be drawn from the patient and after centrifugation to separate blood plasma from its constituents, then an immediate sloshing of blood plasma in the (f-s) packet which has its plug-in to RS. Estimating the quantitative analysis of blood sample concentration, RS will determine the presence of coagulation in terms of intensity and medical procedures will dominate the treatment process. Thus, the suggestive monograph provides a definite instrument for investigating blood coagulation intra-arteries/veins promptly.

Control Device Thermal Modeling in MRI Receive Coil Q-Spoiling Circuits

Q-spoiling circuits for detuning receive coils during high-power magnetic resonance imaging (MRI) slice-select pulses protect both sensitive electronics as well as the patient from undesired high energy signals and associated heating. These circuits have traditionally used PIN diodes and, more recently, field effect transistors to switch in small values of inductance to shift the coil resonance away from the Larmor frequency. These semiconductor devices can see the full radio frequency (RF) power during operation, and will exhibit significant heating, potentially leading to device failure. Even if the device does not reach a destructive heating level, the resistance of the device can increase and effectively degrade the level of blocking in the RF coil. A useful tool for MRI circuit designers would be a thermal model that predicts this change in resistance, and hence degradation in MRI coil blocking, as device temperature rises. This paper presents a method for modeling thermal effects in MRI Q-spoiling control devices. A PIN diode resistance–temperature model is reviewed, and two approaches for field effect transistors that model the temperature rise and subsequent device resistance variation with temperature using SPICE-compatible equivalent circuit elements are covered. Experimental results are presented that validate the form of the models and show that increased device resistance due to temperature rise will degrade MRI blocking by several decibels. The ability to model the control device's thermal characteristics will lead to improved understanding of circuit operation, aid in the selection of the control device for the specific application, and will lead to more reliable MRI instrumentation.

Magnetic resonance imaging with RF encoding on curved natural slices

While the idea of using spatial encoding fields (SEM) for image formation has been proven, conventional wisdom still holds that a magnetic resonance imaging (MRI) system begins with a highly uniform magnetic field. In particular, radio frequency (RF) encoding MRIs designed and tested to date have largely used uniform magnetic fields. Here we demonstrate magnetic resonance imaging in a magnetic field with a built-in gradient that gives non-planar slices – curved surfaces – when the nuclear spins are excited with narrow band RF pulses. Image encoding on these naturally occurring non-planar slices was accomplished with RF encoding using a non-linear spatially varying B1 phase gradient. The imaging methods were demonstrated on a small prototype MRI instrument. The MRI has no switched magnetic field gradients – it is “gradient-free”. A low field gradient-free MRI with low mass permanent magnets and simple, low power, RF encoding hardware is ideal for deployment on the International Space Station for the study of astronaut muscle and bone mass loss. Gradient-free natural slice encoding MRI designs would also be portable enough for application in remote terrestrial locations, in emergency rooms and in operating rooms where they can be used with minimally invasive and robotic surgery.

Radio-frequency coils for ultra-high field magnetic resonance

Radiofrequency (RF) coils are key components of magnetic resonance imaging (MRI) systems. The primary purpose of this review is to provide a basic theory of RF coil designs and their characterization by bench measurements, electromagnetic field simulations and MR measurements. With the continuing increase of magnetic field strength in MRI instruments, the RF wavelength in the subject under study becomes comparable to or smaller in size than the anatomical dimensions of the tissue under study, which amplifies the signal inhomogeneity. Also, RF energy increases quadratically with the Larmor frequency, which leads to increased heat deposition in the subject, especially at ultra-high field. Elegant RF coil designs are explored here to address these challenges.

Anthropogenic rare earth elements and their spatial distributions in the Han River, South Korea

Rare earth elements (REE) consist of lanthanides (from La to Lu), together with yttrium and scandium, in which anthropogenic REE, such as gadolinium (Gd), lanthanum (La), and samarium (Sm), has emerged as micro-contaminants in natural waters in highly developed countries. Here, we collected water samples in the Han River (HR) and its tributaries flowing through Seoul Capital Area, the world's second largest metropolitan area in order to examine how and to what extent anthropogenic REE anomalies may occur. Water samples show higher light REE concentrations than heavy REE concentrations, while wastewater treatment plant (WWTP) samples display much higher heavy REE concentrations due to high Gd concentration. The PAAS-normalized REE patterns indicate that WWTP samples display the pronounced positive Gd anomalies, in which anthropogenic Gd from magnetic resonance imaging (MRI) diagnostic system occurs as a form of Gd complexation with either Cl− or SO42−. Due to the WWTP, both the HR and tributaries show also positive Gd anomalies and the anthropogenic Gd concentrations increase as a function of the distance from the Paldang dam. This result indicates a positive correlation between populaton, number of MRI instruments, and positive Gd anomaly. Similarly, positive La and Sm anomalies exist in the HR, indicating that the HR is also affected by their point sources. Based on the discharge rate and anthropogenic REE concentrations, their fluxes are estimated to be 952 ± 319 kg/yr, suggesting that this amount of fluxes could disturb REE distribution in the Yellow Sea, and pose harmful effects on aquatic ecosystems.