Macroporous Hydrogel Scaffolds Research Articles

Design and characterization of 3D printed pore gradient hydrogel scaffold for bone tissue engineering

Macroporous hydrogel scaffolds are widely used in tissue engineering to promote cell growth and proliferation. Aiming to enhance cell seeding efficiency and facilitate the osteodifferentiation of mesenchymal stem cells, this study demonstrates the fabrication of pore gradient biodegradable hydrogel scaffolds inspired by natural bone structure for bone tissue engineering applications. The scaffolds were fabricated via extrusion-based 3D printing, using sequential deposition of three customized Gelatin/Oxidized Alginate - based inks with subsequent cryogenic crosslinking for permanent structure fixation. The resulting constructs were characterized and featured a continuous gradient morphology with pore sizes ranging from 10 to 300 μm. The gradient scaffolds exhibited improved mechanical stability, with a compression resistance of 149 kPa, as opposed to the non-gradient scaffold's 116 kPa at 70 % strain, and a sustained degradation rate with only a 10 % loss of its initial weight within three weeks. Gradient scaffolds demonstrated a doubling of cell seeding efficiency to 47 % with dense and homogeneously distributed cellular layers, as evidenced by confocal and electron microscopy. Furthermore, the gradient scaffolds demonstrated superior osteodifferentiation, with significantly higher ALP and DMP1 production and enhanced extracellular matrix mineralization compared to gradientless macroporous scaffolds. This study provides insights into the design of macroporous scaffolds and emphasizes the advantages of pore gradient over homogeneous gradientless morphologies.

A transcriptome sequencing study on the effect of macro-pores in hydrogel scaffolds on global gene expression of laden human cartilage chondrocytes

The macro-porous hydrogel scaffolds can not only enhance the proliferation of laden chondrocytes but also favor the deposition of hyaline cartilaginous extracellular matrix, however, the underlying molecular mechanism is still unclear. Herein, the global gene expression of human cartilage chondrocytes (HCCs) encapsulated in traditional hydrogel (Gel) constructs and micro-cavitary gel (MCG) constructs are investigated by using high-throughput RNA sequencing (RNA-seq). The differentially expressed genes (DEGs) between the HCCs cultured in Gel and MCG constructs have been identified via bioinformatics analysis. Significantly, the DEGs that promote cell proliferation (e.g. POSTN, MKI67, KIF20A) or neo-cartilage formation (e.g. COL2, ASPN, COMP, FMOD, FN1), are more highly expressed in MCG constructs than in Gel constructs, while the expressions of the DEGs associated with chondrocyte hypertrophy (e.g. EGR1, IBSP) are upregulated in Gel constructs. The expression of representative DEGs is verified at both mRNA and protein levels. Besides, cellular viability and morphology as well as the enriched signaling pathway of DEGs are studied in detail. These results of this work may provide data for functional tissue engineering of cartilage.

Dissolvable microgel-templated macroporous hydrogels for controlled cell assembly

Mesenchymal stem cells (MSCs)-based therapies have been widely used to promote tissue regeneration and to modulate immune/inflammatory response. The therapeutic potential of MSCs can be further improved by forming multi-cellular spheroids. Meanwhile, hydrogels with macroporous structures are advantageous for improving mass transport properties for the cell-laden matrices. Herein, we report the fabrication of MSC-laden macroporous hydrogel scaffolds through incorporating rapidly dissolvable spherical cell-laden microgels. Dissolvable microgels were fabricated by tandem droplet-microfluidics and thiol-norbornene photopolymerization using a novel fast-degrading macromer poly(ethylene glycol)-norbornene-dopamine (PEGNB-Dopa). The cell-laden PEGNB-Dopa microgels were subsequently encapsulated within another bulk hydrogel matrix, whose porous structure was generated efficiently by the rapid degradation of the PEGNB-Dopa microgels. The cytocompatibility of this in situ pore-forming approach was demonstrated with multiple cell types. Furthermore, adjusting the stiffness and cell adhesiveness of the bulk hydrogels afforded the formation of solid cell spheroids or hollow spheres. The assembly of solid or hollow MSC spheroids led to differential activation of AKT pathway. Finally, MSCs solid spheroids formed in situ within the macroporous hydrogels exhibited robust secretion of HGF, VEGF-A, IL-6, IL-8, and TIMP-2. In summary, this platform provides an innovative method for forming cell-laden macroporous hydrogels for a variety of future biomedical applications.

Revealing the True Morphological Structure of Macroporous Soft Hydrogels for Tissue Engineering

(1) Background: Macroporous hydrogel scaffolds based on poly [N-(2-hydroxypropyl) methacrylamide] are one of the widely studied biocompatible materials for tissue reparation and regeneration. This study investigated the morphological changes during hydrogel characterization which can significantly influence their future application. (2) Methods: Three types of macroporous soft hydrogels differing in pore size were prepared. The macroporosity was achieved by the addition of sacrificial template particles of sodium chloride of various sizes (0–30, 30–50, and 50–90 µm) to the polymerizing mixture. The 3D structure of the hydrogels was then investigated by scanning electron microscopy (SEM) and laser scanning confocal microscopy (LSCM). The SEM was performed with specimens rapidly frozen to various temperatures, while non-frozen gels were visualized with LSCM. (3 and 4) Results and Conclusion: In comparison to LSCM, the SEM images revealed a significant alteration in the mean pore size and appearance of newly formed multiple connections between the pores, depending on the freezing conditions. Additionally, after freezing for SEM, the gel matrix between the pores and the fine pores collapsed. LSCM visualization aided the understanding of the dynamics of pore generation using sodium chloride, providing the direct observation of hydrogel scaffolds with the growing cells. Moreover, the reconstructed confocal z-stacks were a promising tool to quantify the swollen hydrogel volume reconstruction which is not possible with SEM.

Macroporous Hydrogel Scaffolds with Tunable Physicochemical Properties for Tissue Engineering Constructed Using Renewable Polysaccharides.

Polysaccharides have recently attracted increasing attention in the construction of hydrogel devices for biomedical applications. However, polysaccharide-based hydrogels are not suitable for most preclinical applications because of their limited mechanical properties and poor tunability. In this study, we employed a simple and eco-friendly approach to producing a macroporous polysaccharide hydrogel composed of salecan and κ-carrageenan without the use of toxic chemicals. We evaluated the physicochemical properties of the obtained salecan/κ-carrageenan hydrogel and found that its viscoelasticity, morphology, swelling, and thermal stability could be simply controlled by changing the polysaccharide dose in the pre-gel solution. The co-incubation of the fabricated hydrogel with mouse fibroblast cells demonstrated that the hydrogel can support cell adhesion, migration, and growth. Moreover, the hydrogel exhibited good biocompatibility in vivo. Overall, the findings provide a new strategy for the fabrication and optimization of polysaccharide-based hydrogel scaffolds for application in tissue engineering.

Nanostructured degradable macroporous hydrogel scaffolds with controllable internal morphologies via reactive electrospinning

Creating micro/nanostructured hydrogels with tunable morphologies under cell-friendly processing conditions would enable rational engineering of hydrogel scaffolds for targeted biomedical applications. Herein, an all-aqueous single-step reactive electrospinning method is applied to prepare hydrogel networks with controlled morphologies on both the nanoscale and the microscale. Hydrazide and aldehyde-functionalized poly(oligo ethylene glycol methacrylate) (POEGMA) are co-spun from a double barrel syringe together with poly(ethylene oxide) (PEO) as an electrospinning aid. By varying the concentrations and molecular weights of PEO and/or POEGMA, various morphologies from pure fibers to beaded fibers to bead network morphologies with tunable bead sizes can be fabricated, all of which remain monolithically stable in water due to the dynamic covalent crosslinks formed within the gel structure. The rates and magnitudes of swelling, degradation, and mechanics of the resulting scaffolds can be tuned by independently controlling gel morphologies on the nanoscale (i.e. crosslink density within the gel) and the microscale (i.e. the network structure formed), with an atypical independence of swelling relative to the mechanics and degradation rate observed. Furthermore, the internal morphology of the networks is demonstrated to systematically alter both the cell responses within the scaffolds and the rate of protein release from the scaffolds, with small fibers showing optimal cell proliferation, bead networks exhibiting the slowest protein release kinetics and very high maintained cell viabilities post-electrospinning, and beaded fibers showing intermediate properties. Statement of SignificanceControlling the internal structure of hydrogels is critical to successfully applying hydrogels in biomedical applications such as tissue engineering or cell/drug delivery. However, current techniques to fabricate hydrogel scaffolds typically require additives or gelation processes that are poorly compatible with cells and/or require multi-step processes. In this paper, we describe the fabrication of hydrogel scaffolds with tunable feature sizes (from nanometer to micrometer scale) and structures (from all fibers to bead/fiber mixtures to a new “bead network” morphology) using a reactive electrospinning strategy leveraging dynamic hydrazone crosslinking. We show single-step cell/protein loading and systematic control over cell proliferation and protein release kinetics by systematically manipulating the scaffold morphologies and feature sizes, allowing facile customization of scaffold properties for targeted applications.

Engineered macroporous hydrogel scaffolds via pickering emulsions stabilized by MgO nanoparticles promote bone regeneration.

Hydrogels are appealing biomaterials for regenerative medicine since biomimetic modifications of their polymeric network can provide unique physical properties and emulate the native extracellular matrix (ECM). Meanwhile, therapeutic metal ions, such as magnesium ions (Mg2+), not only regulate cellular behaviours but also stimulate local bone formation and healing. However, the absence of a meaningful macroporous structure and the uncompromising mechanical strength are still challenges. Herein, we designed a macroporous composite hydrogel based on mild and fast thiol-ene click reactions. The Pickering emulsion method was adopted to form a macroporous structure and introduce MgO nanoparticles (NPs). The results show that the composite hydrogel possesses good mechanical strength and an evenly distributed macroporous structure. MgO NPs stabilized at the oil/water interface not only function as effective emulsion stabilizers, but also enhance the mechanical properties of hydrogels and mediate the sustained release of Mg2+. In vitro cell experiments demonstrated that the composite hydrogel displays good biocompatibility. More importantly, the release of Mg2+ ions from hydrogels can effectively promote the osteogenic differentiation of BMSCs. Furthermore, an in vivo study showed that macroporous hydrogels can provide a good extracellular matrix microenvironment for in situ osteogenesis and accelerate bone tissue regeneration.

Macroporous Hydrogel Scaffolds for Three-Dimensional Cell Culture and Tissue Engineering.

Hydrogels have been promising candidate scaffolds for cell delivery and tissue engineering due to their tissue-like physical properties and capability for homogeneous cell loading. However, the encapsulated cells are generally entrapped and constrained in the submicron- or nanosized gel networks, seriously limiting cell growth and tissue formation. Meanwhile, the spatially confined settlement inhibits attachment and spreading of anchorage-dependent cells, leading to their apoptosis. In recent years, macroporous hydrogels have attracted increasing attention in use as cell delivery vehicles and tissue engineering scaffolds. The introduction of macropores within gel scaffolds not only improves their permeability for better nutrient transport but also creates space/interface for cell adhesion, proliferation, and extracellular matrix deposition. Herein, we will first review the development of macroporous gel scaffolds and outline the impact of macropores on cell behaviors. In the first part, the advantages and challenges of hydrogels as three-dimensional (3D) cell culture scaffolds will be described. In the second part, the fabrication of various macroporous hydrogels will be presented. Third, the enhancement of cell activities within macroporous gel scaffolds will be discussed. Finally, several crucial factors that are envisaged to propel the improvement of macroporous gel scaffolds are proposed for 3D cell culture and tissue engineering.

Accelerated healing of full thickness dermal wounds by macroporous waterborne polyurethane-chitosan hydrogel scaffolds

Wound healing is a dynamic process wherein cells, and macromolecules work in consonance to facilitate tissue regeneration and restore tissue integrity. In the case of full-thickness (FT) wounds, healing requires additional support from native or synthetic matrices to aid tissue regeneration. In particular, a matrix with optimum hydrophilic-hydrophobic balance which will undergo adequate swelling as well as reduce bacterial adhesion has remained elusive. In the present study, polyurethane diol dispersion (PUD) and the anti-bacterial chitosan (Chn) were blended in different ratios which self-organized to form macroporous hydrogel scaffolds (MHS) at room temperature on drying. SEM and AFM micrographs revealed the macroporosity on top and fracture surfaces of the MHS. FTIR spectra revealed the intermolecular as well as intra-molecular hydrogen bonding interactions between the two polymers responsible for phase separation, which was also observed by micrographs of blend solutions during the drying process. The effect of phase separation on mechanical properties and in vitro degradation (hydrolytic, enzymatic and pH dependent) of MHS were studied and found to be suitable for wound healing. In vitro cytocompatibility was demonstrated by the proliferation of primary rat fibroblast cells on MHS. Selected MHS was subjected to in vivo FT wound healing study in Wistar rats and compared with an analogous polyurethane containing commercial dressing i.e. Tegaderm™. The MHS-treated wounds demonstrated accelerated healing with increased wound contraction, higher collagen synthesis, and vascularization in wound area compared to Tegaderm™. Thus, it is concluded that the developed MHS is a promising candidate for application as FT wound healing dressings.

The Development of Macroporous PEG-Based Hydrogel Scaffolds for Tissue Engineering Applications

The fabrication of porous poly (ethylene glycol) (PEG)-based hydrogel scaffolds via epoxy-amine crosslinked polymerization was conducted in this research works. PEG was chosen as the main component of the hydrogel scaffolds due to their unique characteristic including high hydrophilicity, biocompatibility and low toxicity properties. The effects of different solvents ((water, dimethylsulfoxide (DMSO), triethylene glycol dimethyl ether (TGDME), etc) toward physical and mechanical properties of fabricated PEG-based hydrogel scaffolds were investigated to identify the suitable solvent for fabrication of porous hydrogel scaffolds. From the results obtained, DMSO was selected as the solvent because the produced hydrogels scaffolds possessed the optimum physical properties as compared to other solvents. In tissue engineering field, porosity of scaffolds play key role for cell attachment, grow and proliferation consequently help in regeneration of new tissues. Therefore, in this study the macroporous hydrogel scaffolds were produced via introduction of fused salt templates in the range sizes of 100–300 μm (small) and 300–600 μm (large) in the fabrication process. Improved interconnectivity of pores was achieved and pores sizes obtained were according to the size of salt particles utilized in the template. Modification of the scaffolds pore morphology resulted in a reduction in the mechanical properties as we expected.

Toward Structured Macroporous Hydrogel Composites: Electron Beam-Initiated Polymerization of Layered Cryogels

The ability to tailor mechanical properties and architecture is crucial in creating macroporous hydrogel scaffolds for tissue engineering. In the present work, a technique for the modification of the pore size and stiffness of acrylamide-based cryogels is demonstrated via the regulation of an electron beam irradiation dose. The samples were characterized by equilibrium swelling measurements, light and scanning electron microscopy, mercury porosimetry, Brunauer-Emmett-Teller surface area analysis, and stiffness measurements. Their properties were compared to cryogels prepared by a standard redox-initiated radical polymerization. A (125)I radiolabeled azidopentanoyl-GGGRGDSGGGY-NH2 peptide was bound to the surface to determine the concentration of the adhesive sites available for biomimetic modification. The functionality of the prepared substrates was evaluated by in vitro cultivation of adipose-derived stem cells. Moreover, the feasibility of preparing layered cryogels was demonstrated. This may be the key to the future preparation of complex hydrogel-based scaffolds to mimic the extracellular microenvironment in a wide range of applications.

Additive manufacturing of cell-loaded alginate enriched with alkaline phosphatase for bone tissue engineering application

AbstractHydrogels are gaining interest as scaffolds for bone tissue regeneration due to ease of incorporation of cells and biological molecules such as enzymes. Mineralization of hydrogels, desirable for bone tissue regeneration applications, may be achieved enzymatically by incorporation of alkaline phosphatase (ALP). Additive manufacturing techniques such as bioplotting enable the layer-by-layer creation of three-dimensional hydrogel scaffolds with highly defined geometry and internal architecture. In this study, we present a novel method to produce macroporous hydrogel scaffolds in combination with cell-loaded capsule-containing struts by 3D bioplotting. This approach enables loading of the capsules and strut phases with different cells and/or bioactive substances and hence makes compartmentalization within a scaffold possible. 3D porous alginate scaffolds enriched with ALP and MG-63 osteoblast-like cells were produced by bioplotting struts of alginate which were loaded with pre-fabricated alginate capsules. Two combinations were compared, namely ALP in the struts and cells in the capsules and vice-versa. Both combinations were cytocompatible for cells and mineralization of scaffolds could be detected in both cases, according to an OsteoImage staining. ALP had no adverse effect on cytocompatibility and enhanced mitochondrial activity.

Biomimetic macroporous PEG hydrogels as 3D scaffolds for the multiplication of human hematopoietic stem and progenitor cells

Multiplication of hematopoietic stem cells (HSCs) in vitro with current standard methods is limited and mostly insufficient for clinical applications of these cells. They quickly lose their multipotency in culture because of the fast onset of differentiation. In contrast, HSCs efficiently self-renew in their natural microenvironment (their niche) in the bone marrow. Therefore, engineering artificial bone marrow analogs is a promising biomaterial-based approach for culturing these cells. In the current study, a straight-forward, easy-to-use method for the production of biofunctionalized, macroporous hydrogel scaffolds that mimic the spongy architecture of trabecular bones was developed. As surrogates for cellular components of the niche, mesenchymal stem cells (MSCs) from different sources (bone marrow and umbilical cord) and osteoblast-like cells were tested. MSCs from bone marrow had the strongest pro-proliferative effect on freshly isolated human hematopoietic stem and progenitor cells (HSPCs) from umbilical cord blood. Co-culture in the pores of the three-dimensional hydrogel scaffold showed that the positive effect of MSCs on preservation of HSPC stemness was more pronounced in 3D than in standard 2D cell culture systems. Thus, the presented biomimetic scaffolds revealed to meet the basic requirements for creating artificial HSC niches.

Macroporous Hydrogel Scaffolds and Their Characterization By Optical Coherence Tomography

A simple porogen-leaching method to fabricate macroporous cyclic acetal hydrogel cell scaffolds is presented. Optical coherence tomography (OCT) was applied for nondestructive imaging and quantitative characterization of the scaffold structures. High-resolution OCT reveals the microstructures of the engineered tissue scaffolds in three dimensions. It also enables subsequent image processing to investigate quantitatively several key morphological design parameters for macroporous scaffolds, including the volume porosity, pore interconnectivity, and pore size. Two image-processing algorithms were adapted: three-dimensional labeling was applied to assess the interconnectivity, and erosion was applied to assess the pore size. Scaffolds with different design parameters were imaged, characterized, and compared. OCT imaging and image processing successfully discriminated scaffolds made from different formulations in terms of volume porosity, interconnectivity, and pore size. The cell viability and their spread across the scaffolds were confirmed by the fluorescence microscopy co-registered with OCT.

Biomimetic macroporous hydrogel scaffolds in a high‐throughput screening format for cell‐based assays

Macroporous hydrogels (MHs) hold great promise as scaffolds in tissue engineering and cell-based assays. In this study, the possibility of combination of three-dimensional (3D) cell culture with a miniaturized screening format was demonstrated on human colon cancer HCT116, human acute myeloid leukemia KG-1 cells, and embryonic fibroblasts cultured on MHs (12.5 mm x 7.1 mm I.D.) in a 96-minicolumn plate format. MHs were prepared by cryogelation technique and functionalized by coating with type I collagen and by copolymerization with agmatine-based mimetic of cell adhesive peptide RGD (abRGDm). Cancer cells formed multicellular aggregates while fibroblasts formed adhesions on abRGDm-containing and collagen-MHs but not on plain MHs, as was demonstrated by scanning electron microscopy. HCT116 and KG-1 cells grown as aggregates were more resistant to the treatment with cis-diaminedichloroplatinum (II) (cisplatin) and cytosine 1-beta-D-arabinofuranoside (Ara-C), respectively, during the first 18-24 h of incubation, than single cells grown on unmodified MH. HCT116 cells grown as 2D cultures in conventional 96-well tissue culture plates were 1.5- to 3.5-fold more sensitive to the treatment with 70 microM cisplatin than cells in 3D cultures in functionalized MHs. Further development of the described experimental system including matching of a specific cell type with appropriate extracellular matrix (ECM) components and 3D cocultures on ECM-modified MHs may provide a realistic in vitro experimental model for high-throughput toxicity tests.