M13 Coat Protein Research Articles

CdsA is involved in biosynthesis of glycolipid MPIase essential for membrane protein integration in vivo

MPIase is a glycolipid that is involved in membrane protein integration. Despite evaluation of its functions in vitro, the lack of information on MPIase biosynthesis hampered verification of its involvement in vivo. In this study, we found that depletion of CdsA, a CDP-diacylglycerol synthase, caused not only a defect in phospholipid biosynthesis but also MPIase depletion with accumulation of the precursors of both membrane protein M13 coat protein and secretory protein OmpA. Yeast Tam41p, a mitochondrial CDP-diacylglycerol synthase, suppressed the defect in phospholipid biosynthesis, but restored neither MPIase biosynthesis, precursor processing, nor cell growth, indicating that MPIase is essential for membrane protein integration and therefore for cell growth. Consistently, we observed a severe defect in protein integration into MPIase-depleted membrane vesicles in vitro. Thus, the function of MPIase as a factor involved in protein integration was proven in vivo as well as in vitro. Moreover, Cds1p, a eukaryotic CdsA homologue, showed a potential for MPIase biosynthesis. From these results, we speculate the presence of a eukaryotic MPIase homologue.

Polarity and Charge as Determinants for Translocase Requirement for Membrane Protein Insertion

Membrane protein biogenesis in bacteria is a well-studied but poorly understood area in the field of membrane proteins. In bacteria, the Sec translocon and the YidC insertase promote the membrane insertion process. Both proteins are essential, and universally conserved, and together insert about 95% of the proteins in E.coli. Membrane insertion of SecYEG-dependent proteins likely occurs at the lateral gate of SecY, the channel-forming subunit of the bacterial Sec translocon. On the other hand, YidC catalyzes insertion by possessing a hydrophilic groove, which can accommodate the hydrophilic region of the substrate that inserts across the membrane. Recently, Soman et al (2014) have reported that increasing the charge of the translocated region of procoat can route substrates from the YidC pathway into the Sec pathway. Here, we have further tested this polarity/charge hypothesis by showing that the major coat protein of bacteriophage M13 can become increasingly YidC/Sec dependent by making the periplasmic loop highly polar in the absence of charged residues. We also show that adding hydrophobic amino acids to highly polar or charged loop can decrease the Sec-dependence of the otherwise strictly Sec-dependent substrates. Additionally we demonstrate that increasing the driving force of insertion by adding four leucyl residues to the transmembrane segment leads to translocation of a highly charged region that was not inserted by native TM segment. Finally, we show that the length of procoat loop is a determinant for Sec dependent insertion. The combined results support the polarity/charge hypothesis and is consistent with the notion that membrane insertion occurs at the interface of SecYEG and YidC.

Directed surface attachment of nanomaterials via coiled-coil-driven self-assembly

Numerous nanoscale devices and materials have been fabricated in recent years using a variety of biological scaffolds. However, the interfacing of these devices and materials into existing circuits and ordered arrays has proved problematic. Here, we describe a simple solution to this problem using self-assembly of the peptide coiled-coil heterodimer ACID:BASE to immobilize M13 bacteriophage particles to specific locations on a patterned gold surface. Surface plasmon resonance demonstrated that free ACID peptides will assemble onto a surface derivatized with BASE. We then displayed the ACID peptide on the pIX coat protein of M13 and showed that these phage particles permit formation of the coiled-coil resulting in specific surface attachment. The ACID:immobilized BASE affinities appear to be similar for free peptide and phage-displayed ACID. Finally, we fabricated two gold electrodes, separated by a 200 nm gap, coated one of them with BASE and showed that this allows localization of the M13:ACID onto the functionalized electrode.

Profiling of dynamics in protein–lipid–water systems: a time-resolved fluorescence study of a model membrane protein with the label BADAN at specific membrane depths

Profiles of lipid-water bilayer dynamics were determined from picosecond time-resolved fluorescence spectra of membrane-embedded BADAN-labeled M13 coat protein. For this purpose, the protein was labeled at seven key positions. This places the label at well-defined locations from the water phase to the center of the hydrophobic acyl chain region of a phospholipid model membrane, providing us with a nanoscale ruler to map membranes. Analysis of the time-resolved fluorescence spectroscopic data provides the characteristic time constant for the twisting motion of the BADAN label, which is sensitive to the local flexibility of the protein–lipid environment. In addition, we obtain information about the mobility of water molecules at the membrane–water interface. The results provide an unprecedented nanoscale profiling of the dynamics and distribution of water in membrane systems. This information gives clear evidence that the actual barrier of membranes for ions and aqueous solvents is located at the region of carbonyl groups of the acyl chains.

Asymmetric dipping of bacteriophage M13 coat protein with increasing lipid bilayer thickness

Knowledge about the vertical movement of a protein with respect to the lipid bilayer plane is important to understand protein functionality in the biological membrane. In this work, the vertical displacement of bacteriophage M13 major coat protein in a lipid bilayer is used as a model system to study the molecular details of its anchoring mechanism in a homologue series of lipids with the same polar head group but different hydrophobic chain length. The major coat proteins were reconstituted into 14:1PC, 16:1PC, 18:1PC, 20:1PC, and 22:1PC bilayers, and the fluorescence spectra were measured of the intrinsic tryptophan at position 26 and BADAN attached to an introduced cysteine at position 46, located at the opposite ends of the transmembrane helix. The fluorescence maximum of tryptophan shifted for 700 cm -1 on going from 14:1PC to 22:1PC, the corresponding shift of the fluorescence maximum of BADAN at position 46 was approximately 10 times less (∼ 70 cm -1). Quenching of fluorescence with the spin label CAT 1 indicates that the tryptophan is becoming progressively inaccessible for the quencher with increasing bilayer thickness, whereas quenching of BADAN attached to the T46C mutant remained approximately unchanged. This supports the idea that the BADAN probe at position 46 remains at the same depth in the bilayer irrespective of its thickness and clearly indicates an asymmetrical nature of the protein dipping in the lipid bilayer. The anchoring strength at the C-terminal domain of the protein (provided by two phenylalanine residues together with four lysine residues) was estimated to be roughly 5 times larger than the anchoring strength of the N-terminal domain.

Membrane Protein Frustration: Protein Incorporation into Hydrophobic Mismatched Binary Lipid Mixtures

Bacteriophage M13 major coat protein was reconstituted in different nonmatching binary lipid mixtures composed of 14:1PC and 22:1PC lipid bilayers. Challenged by this lose-lose situation of hydrophobic mismatch, the protein-lipid interactions are monitored by CD and site-directed spin-label electron spin resonance spectroscopy of spin-labeled site-specific single cysteine mutants located in the C-terminal protein domain embedded in the hydrophobic core of the membrane (I39C) and at the lipid-water interface (T46C). The CD spectra indicate an overall α-helical conformation irrespective of the composition of the binary lipid mixture. Spin-labeled protein mutant I39C senses the phase transition in 22:1PC, in contrast to spin-labeled protein mutant T46C, which is not affected by the transition. The results of both CD and electron spin resonance spectroscopy clearly indicate that the protein preferentially partitions into the shorter 14:1PC both above and below the gel-to-liquid crystalline phase transition temperature of 22:1PC. This preference is related to the protein tilt angle and energy penalty the protein has to pay in the thicker 22:1PC. Given the fact that in Escherichia coli, which is the host for M13 bacteriophage, it is easier to find shorter 14 carbon acyl chains than longer 22 carbon acyl chains, the choice the M13 coat protein makes seems to be evolutionary justified.

Structure and Dynamics of Human Apolipoprotein CIII

Human apolipoprotein CIII (apoCIII) is a surface component of chylomicrons, very low density lipoproteins, and high density lipoproteins. ApoCIII inhibits lipoprotein lipase as well as binding of lipoproteins to cell surface heparan sulfate proteoglycans and receptors. High levels of apoCIII are often correlated with elevated levels of blood lipids (hypertriglyceridemia). Here, we report the three-dimensional NMR structure and dynamics of human apo-CIII in complex with SDS micelles, mimicking its natural lipid-bound state. Thanks to residual dipolar coupling data, the first detailed view is obtained of the structure and dynamics of an intact apolipoprotein in its lipid-bound state. ApoCIII wraps around the micelle surface as a necklace of six approximately 10-residue amphipathic helices, which are curved and connected via semiflexible hinges. Three positively charged (Lys) residues line the polar faces of helices 1 and 2. Interestingly, their three-dimensional conformation is similar to that of the low density lipoprotein receptor binding motifs of apoE/B and the receptor-associated protein. At the C-terminal side of apoCIII, an array of negatively charged residues lines the polar faces of helices 4 and 5 and the adjacent flexible loop. Sequence comparison shows that this asymmetric charge distribution along the solvent-exposed face of apoCIII as well as other structural features are conserved among mammals. This structure provides a template for exploration of molecular mechanisms by which human apoCIII inhibits lipoprotein lipase and receptor binding.

Pyrimidine Dimer Formation and Oxidative Damage in M13 Bacteriophage Inactivation by Ultraviolet C Irradiation¶

The mechanism by which UV-C irradiation inactivates M13 bacteriophage was studied by analyzing the M13 genome using agarose gel electrophoresis and South-Western blotting for pyrimidine dimers. The involvement of singlet oxygen (1O2) was also investigated using azide and deuterium oxide and under deoxygenated conditions. With a decrease in M13 infectivity on irradiation, single-stranded circular genomic DNA (sc-DNA) was converted to Form I and Form II, which had an electrophoretic mobility between that of sc-DNA and linear-form DNA. However, the amount of sc-DNA remaining was not correlated with the survival of M13. The formation of cyclobutane pyrimidine dimers (CPD) and pyrimidine (6–4) pyrimidone photoproducts ((6–4)PP) increased as a function of irradiation dose. The decrease in M13 infectivity was highly correlated with the increase in CPD and (6–4)PP, whereas no change was seen in M13 coat protein on sodium dodecyl sulfate–polyacrylamide gel electrophoresis. 8-Oxo-7,8-dihydro-2′-deoxyguanosine did not form in the M13 genome after UV-C irradiation. Inactivation of M13 was neither enhanced by deuterium oxide nor inhibited by azide. Deoxygenation of the M13 suspension did not affect the inactivation, indicating that 1O2 did not participate in the inactivation of M13 by UV-C irradiation under these conditions. These results indicated that UV-C irradiation induced not only CPD and (6–4)PP formation but also additional tertiary structural change in DNA inside the M13 virions, resulting in primary damage and a loss of infectivity. The indirect effect of UV-C irradiation such as 1O2 production followed by oxidative damage to nucleic acids and proteins might have contributed less, if at all, to the inactivation of M13 than the direct effect of UV-C.

The position of the Gly-xxx-Gly motif in transmembrane segments modulates dimer affinityThis paper is one of a selection of papers published in this Special Issue, entitled CSBMCB — Membrane Proteins in Health and Disease.

Although the intrinsic low solubility of membrane proteins presents challenges to their high-resolution structure determination, insight into the amino acid sequence features and forces that stabilize their folds has been provided through study of sequence-dependent helix-helix interactions between single transmembrane (TM) helices. While the stability of helix-helix partnerships mediated by the Gly-xxx-Gly (GG4) motif is known to be generally modulated by distal interfacial residues, it has not been established whether the position of this motif, with respect to the ends of a given TM segment, affects dimer affinity. Here we examine the relationship between motif position and affinity in the homodimers of 2 single-spanning membrane protein TM sequences: glycophorin A (GpA) and bacteriophage M13 coat protein (MCP). Using the TOXCAT assay for dimer affinity on a series of GpA and MCP TM segments that have been modified with either 4 Leu residues at each end or with 8 Leu residues at the N-terminal end, we show that in each protein, centrally located GG4 motifs are capable of stronger helix-helix interactions than those proximal to TM helix ends, even when surrounding interfacial residues are maintained. The relative importance of GG4 motifs in stabilizing helix-helix interactions therefore must be considered not only in its specific residue context but also in terms of the location of the interactive surface relative to the N and C termini of alpha-helical TM segments.

A Phage Display Screen and Binding Studies with Acetylated Low Density Lipoprotein Provide Evidence for the Importance of the Scavenger Receptor Cysteine-rich (SRCR) Domain in the Ligand-binding Function of MARCO

MARCO is a class A scavenger receptor capable of binding both gram-negative and -positive bacteria. Using the surface plasmon resonance technique, we show here that a recombinant, soluble form of MARCO, sMARCO, binds the major gram-negative and -positive bacterial surface components, lipopolysaccharide and lipoteichoic acid. Yet, the interaction of these two polyanions with sMARCO is of much lower affinity than that of polyinosinic acid, a polyanionic inhibitor of bacterial binding to MARCO. To further elucidate the ligand-binding functions of MARCO, we performed a phage display screen with sMARCO. The screening resulted in the enrichment of only a handful of phage clones. Contrary to expectations, no polyanionic peptides, but only those with a predominantly hydrophobic nature, were enriched. One peptide, VRWGSFAAWL, was displayed on two-thirds of the phages recovered after four rounds of screening. The VRWGSFAAWL phage-sMARCO interaction had significantly slower dissociation kinetics than that between sMARCO and lipopolysaccharide or lipoteichoic acid. Further work with this phage, and the second most enriched phage, displaying the peptide RLNWAWWLSY, demonstrated that both peptides bind to the SRCR domain of MARCO, and that they probably bind to the same site. Data base searches suggested that the VRWGSFAAWL peptide represents complement component C4, but we could not convincingly confirm this suggestion. A study with chimeric scavenger receptors indicated that even minor sequence changes in the MARCO scavenger receptor cysteine-rich (SRCR) domain can have profound effects on the binding of the prototypic scavenger receptor ligand, acetylated low density lipoprotein. As shown by differential binding of glutathione S-transferase-VR-WGSFAAWL, these differences were very likely due to conformational changes. These findings led to experiments that demonstrated a crucial role of the SRCR domain for acetylated low density lipoprotein binding in MARCO. Thus, our results strengthen the notion that the SRCR domain is the major ligand-binding domain in MARCO. Furthermore, they suggest that the domain may contain multiple ligand-binding sites.

Rapid Preparation of Stable Isotope Labeled Peptides that Bind to Target Proteins by a Phage Library System

We have developed a system for directly isolating foreign peptides displayed on the N-terminus of the major coat protein of bacteriophage M13. The phage particle in this system is formed as a mixture of wild type and modified coat proteins. The N-terminal segment of the modified coat protein was mutated for chemical cleavage, in order to obtain the displayed peptide from the major coat protein. Using 13C, 15N- labeled medium, we introduced stable isotopes, 13C and/or 15N, into the coat proteins. The NMR spectra for the cleaved peptides from the phage particles could be recorded within a few days after the selection of the phage clone.

Membrane-bound Conformation of M13 Major Coat Protein: A STRUCTURE VALIDATION THROUGH FRET-DERIVED CONSTRAINTS

M13 major coat protein, a 50-amino-acid-long protein, was incorporated into DOPC/DOPG (80/20 molar ratio) unilamellar vesicles. Over 60% of all amino acid residues was replaced with cysteine residues, and the single cysteine mutants were labeled with the fluorescent label I-AEDANS. The coat protein has a single tryptophan residue that is used as a donor in fluorescence (or Förster) resonance energy transfer (FRET) experiments, using AEDANS-labeled cysteines as acceptors. Based on FRET-derived constraints, a straight alpha-helix is proposed as the membrane-bound conformation of the coat protein. Different models were tested to represent the molecular conformations of the donor and acceptor moieties. The best model was used to make a quantitative comparison of the FRET data to the structures of M13 coat protein and related coat proteins in the Protein Data Bank. This shows that the membrane-bound conformation of the coat protein is similar to the structure of the coat protein in the bacteriophage that was obtained from x-ray diffraction. Coat protein embedded in stacked, oriented bilayers and in micelles turns out to be strongly affected by the environmental stress of these membrane-mimicking environments. Our findings emphasize the need to study membrane proteins in a suitable environment, such as in fully hydrated unilamellar vesicles. Although larger proteins than M13 major coat protein may be able to handle environmental stress in a different way, any membrane protein with water exposed parts in the C or N termini and hydrophilic loop regions should be treated with care.

Membrane Assembly of M13 Major Coat Protein: Evidence for a Structural Adaptation in the Hinge Region and a Tilted Transmembrane Domain

New insights into the low-resolution structure of the hinge region and the transmembrane domain of the membrane-bound major coat protein of the bacteriophage M13 are deduced from a single cysteine-scanning approach using fluorescence spectroscopy. New mutant coat proteins are labeled and reconstituted into phospholipid bilayers with varying headgroup compositions (PC, PE, and PG) and thicknesses (14:1PC, 18:1PC, and 22:1PC). Information about the polarity of the local environment around the labeled sites is deduced from the wavelength of maximum emission using AEDANS attached to the SH groups of the cysteines as a fluorescent probe. It is found that the protein is almost entirely embedded in the membrane, whereas the phospholipid headgroup composition of the membrane hardly affects the overall embedment of the protein in the membrane. From the assessment of a hydrophobic and hydrophilic face of the transmembrane helix, it is concluded that the helix is tilted with respect to the membrane normal. As compared to the thicker 18:1PC and 22:1PC membranes, reconstitution of the protein in the thin 14:1PC membranes results in a loss of helical structure and in the formation of a stretched conformation of the hinge region. It is suggested that the hinge region acts as a flexible spring between the N-terminal amphipathic arm and transmembrane hydrophobic helix. On average, the membrane-bound state of the coat protein can be seen as a gently curved and tilted, "banana-shaped" molecule, which is strongly anchored in the membrane-water interface at the C-terminus. From our experiments, we propose a rather small conformational adaptation of the major coat protein as the most likely reversible mechanism for responding to environmental changes during the bacteriophage disassembly and assembly process.

Anchored periplasmic expression, a versatile technology for the isolation of high-affinity antibodies from Escherichia coli-expressed libraries.

Anchored periplasmic expression (APEx) is a technology for the isolation of ligand-binding proteins from combinatorial libraries anchored on the periplasmic face of the inner membrane of Escherichia coli. After disruption of the outer membrane by Tris-EDTA-lysozyme, the inner-membrane-anchored proteins readily bind fluorescently labeled ligands as large as 240 kDa. Fluorescently labeled cells are isolated by flow cytometry, and the DNA of isolated clones is rescued by PCR. By using two rounds of APEx, the affinity of a neutralizing antibody to the Bacillus anthracis protective antigen was improved >200-fold, exhibiting a final K(D) of 21 pM. This approach has several technical advantages compared with previous library screening technologies, including the unique ability to screen for ligand-binding proteins that bind endogenously expressed ligands fused to a short-lived GFP. Further, APEx is able to display proteins either as an N-terminal fusion to a six-residue sequence derived from the native E. coli lipoprotein NlpA, or as a C-terminal fusion to the phage gene three minor coat protein of M13. The latter fusions allow hybrid phage display/APEx strategies without the need for further subcloning.

Pyrimidine dimer formation and oxidative damage in M13 bacteriophage inactivation by ultraviolet C irradiation.

The mechanism by which UV-C irradiation inactivates M13 bacteriophage was studied by analyzing the M13 genome using agarose gel electrophoresis and South-Western blotting for pyrimidine dimers. The involvement of singlet oxygen (1O2) was also investigated using azide and deuterium oxide and under deoxygenated conditions. With a decrease in M13 infectivity on irradiation, single-stranded circular genomic DNA (sc-DNA) was converted to Form I and Form II, which had an electrophoretic mobility between that of sc-DNA and linear-form DNA. However, the amount of sc-DNA remaining was not correlated with the survival of M13. The formation of cyclobutane pyrimidine dimers (CPD) and pyrimidine (6-4) pyrimidone photoproducts ((6-4)PP) increased as a function of irradiation dose. The decrease in M13 infectivity was highly correlated with the increase in CPD and (6-4)PP, whereas no change was seen in M13 coat protein on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. 8-Oxo-7,8-dihydro-2'-deoxyguanosine did not form in the M13 genome after UV-C irradiation. Inactivation of M13 was neither enhanced by deuterium oxide nor inhibited by azide. Deoxygenation of the M13 suspension did not affect the inactivation, indicating that 1O2 did not participate in the inactivation of M13 by UV-C irradiation under these conditions. These results indicated that UV-C irradiation induced not only CPD and (6-4)PP formation but also additional tertiary structural change in DNA inside the M13 virions, resulting in primary damage and a loss of infectivity. The indirect effect of UV-C irradiation such as 1O2 production followed by oxidative damage to nucleic acids and proteins might have contributed less, if at all, to the inactivation of M13 than the direct effect of UV-C.

A Minimized M13 Coat Protein Defines the Requirements for Assembly into the Bacteriophage Particle

The M13 filamentous bacteriophage coat is a symmetric array of several thousand α-helical major coat proteins (P8) that surround the DNA core. P8 molecules initially reside in the host membrane and subsequently transition into their role as coat proteins during the phage assembly process. A comprehensive mutational analysis of the 50-residue P8 sequence revealed that only a small subset of the side-chains were necessary for efficient incorporation into a wild-type (wt) coat. In the three-dimensional structure of P8, these side-chains cluster into three functional epitopes: a hydrophobic epitope located near the N terminus and two epitopes (one hydrophobic and the other basic) located near the C terminus on opposite faces of the helix. The results support a model for assembly in which the incorporation of P8 is mediated by intermolecular interactions involving these functional epitopes. In this model, the N-terminal hydrophobic epitope docks with P8 molecules already assembled into the phage particle in the periplasm, and the basic epitope interacts with the acidic DNA backbone in the cytoplasm. These interactions could facilitate the transition of P8 from the membrane into the assembling phage, and the incorporation of a single P8 would be completed by the docking of additional P8 molecules with the second hydrophobic epitope at the C terminus. We constructed a minimized P8 that contained only nine non-Ala side-chains yet retained all three functional epitopes. The minimized P8 assembled into the wt coat almost as efficiently as wt P8, thus defining the minimum requirements for protein incorporation into the filamentous phage coat. The results suggest possible mechanisms of natural viral evolution and establish guidelines for the artificial evolution of improved coat proteins for phage display technology.

Fluorescence resonance energy transfer shows a close helix-helix distance in the transmembrane M13 procoat protein.

During the membrane insertion process the major coat protein of bacteriophage M13 assumes a conformation in which two transmembrane helices corresponding to the leader sequence and the anchor region in the mature part of the protein coming into close contact with each other. Previous studies on the molecular mechanism of membrane insertion of M13 procoat protein have shown that this interaction between the two helices might drive the actual translocation process. We investigated the intramolecular distance between the two helices of the transmembrane procoat protein by measuring fluorescence resonance energy transfer (FRET) between the donor (Tyr) placed in one helix and the acceptor (Trp) placed in the other helix. Various mutant procoat proteins with differently positioned donor-acceptor pairs were generated, purified, and reconstituted into artificial lipid bilayers. The results obtained from the FRET measurements, combined with molecular modeling, show that the transmembrane helices are in close contact on the order of 1-1.5 nm. The present approach might be of general interest for determining the topology and the folding of membrane proteins.

Engineering M13 for phage display

Phage display is achieved by fusing polypeptide libraries to phage coat proteins. The resulting phage particles display the polypeptides on their surfaces and they also contain the encoding DNA. Library members with particular functions can be isolated with simple selections and polypeptide sequences can be decoded from the encapsulated DNA. The technology's success depends on the efficiency with which polypeptides can be displayed on the phage surface, and significant progress has been made in engineering M13 bacteriophage coat proteins as improved phage display platforms. Functional display has been achieved with all five M13 coat proteins, with both N- and C-terminal fusions. Also, coat protein mutants have been designed and selected to improve the efficiency of heterologous protein display, and in the extreme case, completely artificial coat proteins have been evolved specifically as display platforms. These studies demonstrate that the M13 phage coat is extremely malleable, and this property can be used to engineer the phage particle specifically for phage display. These improvements expand the utility of phage display as a powerful tool in modern biotechnology.

Membrane-Anchoring Interactions of M13 Major Coat Protein

The response to hydrophobic mismatch of membrane-bound M13 major coat protein is measured using site-directed fluorescence and ESR spectroscopy. For this purpose, we investigate the membrane-anchoring interactions of M13 coat protein in model systems consisting of phosphatidylcholine bilayers that vary in hydrophobic thickness. Mutant coat proteins are prepared with an AEDANS-labeled single cysteine residue in the hinge region of the protein or at the C-terminal side of the transmembrane helix. In addition, the fluorescence of the tryptophan residue is studied as a monitor for the N-terminal side of the transmembrane helix. The fluorescence results show that the hinge region and C-terminal side of the transmembrane helix hardly respond to hydrophobic mismatch. In contrast, the N-terminal side of the helical transmembrane domain shifts to a more apolar environment, when the hydrophobic thickness is increased. The apparent strong membrane-anchoring interactions of the C-terminus are confirmed using a mutant that contains a longer transmembrane domain. As a result of this mutation, the tryptophan residue at the N-terminal side of the helical domain clearly shifts to a more polar environment, whereas the labeled position 46 at the C-terminal side is not affected. The phenylalanines in the C-terminal part of the protein play an important role in these apparent strong anchoring interactions. This is demonstrated with a mutant in which both phenylalanines are replaced by alanine residues. The phenylalanine residues in the C-terminus affect the location in the membrane of the entire transmembrane domain of the protein.

Constrained modeling of spin-labeled major coat protein mutants from M13 bacteriophage in a phospholipid bilayer.

The family of three-dimensional molecular structures of the major coat protein from the M13 bacteriophage, which was determined in detergent micelles by NMR methods, has been analyzed by constrained geometry optimization in a phospholipid environment. A single-layer solvation shell of dioleoyl phosphatidylcholine lipids was built around the protein, after replacing single residues by cysteines with a covalently attached maleimide spin label. Both the residues substituted and the phospholipid were chosen for comparison with site-directed spin labeling EPR measurements of distance and local mobility made previously on membranous assemblies of the M13 coat protein purified from viable mutants. The main criteria for identifying promising candidate structures, out of the 300 single-residue mutant models generated for the membranous state, were 1) lack of steric conflicts with the phospholipid bilayer, 2) good match of the positions of spin-labeled residues along the membrane normal with EPR measurements, and 3) a good match between the sequence profiles of local rotational freedom and a structural restriction parameter for the spin-labeled residues obtained from the model. A single subclass of structure has been identified that best satisfies these criteria simultaneously. The model presented here is useful for the interpretation of future experimental data on membranous M13 coat protein systems. It is also a good starting point for full-scale molecular dynamics simulations and for the design of further site-specific spectroscopic experiments.