Lytic Polysaccharide Monooxygenases Research Articles

Light-driven lytic polysaccharide monooxygenasecatalysis mediated by Type I photosensitizers.

The use of light as abundant, renewable, and clean energy source to boost lytic polysaccharide monooxygenase (LPMO) reactions represents an exciting and yet under-explored opportunity. Herein we demonstrated that photosensitizers, commonly used in photodynamic therapy, which act through the photocatalytic Type I mechanism can drive the oxidation of PASC by LPMOs, whereas Type II photosensitizers are not capable of promoting the LPMO activity. We analyzed Type I and Type II photosensitizers (methylene blue and tetraiodide salt of meso-tetrakis-(4-N-methylpyridyl) porphyrin, respectively) and demonstrated that, even without an addition of external reductant, Type I was capable of boosting Thermothelomyces thermophila MtLPMO9A activity in the presence of light. We also evaluated the photobiosystem in the presence and/or absence of molecular oxygen (O2) and hydrogen peroxide (H2O2), and investigated the role of superoxide radical in the methylene blue fueled reactions. Furthermore, we demonstrated that sodium bisulfite (NaHSO3), a chemical scavenger of H2O2, acts by safeguarding the enzyme from oxidative damage caused by accumulation of H2O2 early in photosensitizer-driven LPMO reactions. Finally, the results of the present work demonstrated that light-driven LPMO reactions mediated photodynamic therapy (PDT) Type I photosensitizers, which also includes molecules such as curcumin and riboflavin, is a general phenomenon.

Elucidating Thermothielavioides terrestris secretome changes for improved saccharification of mild steam-pretreated spruce

BackgroundThe efficient use of softwood in biorefineries is hampered by its recalcitrance to enzymatic saccharification. In the present study, the fungus Thermothielavioides terrestris LPH172 was cultivated on three steam-pretreated spruce materials (STEX180°C/auto, STEX210°C/auto, and STEX210°C/H2SO4), characterized by different hemicellulose content and structure, as well as on untreated biomass. The aim of the study was to map substrate-induced changes in the secretome of T. terrestris grown on differently treated spruce materials and to evaluate the hydrolytic efficiency of the secretome as supplement for a commercial enzyme mixture.ResultsThe cultivation of T. terrestris was monitored by endo-cellulase, endo-xylanase, endo-mannanase, laccase, and peroxidase activity measurements. Proteomic analysis was performed on the secretomes induced by the spruce materials to map the differences in enzyme production. Growth of T. terrestris on STEX180°C/auto and STEX210°C/auto induced higher expression level of mannanases and mannosidases of the GH5_7 CAZy family compared to cultivation on the other materials. Cultivation on untreated biomass led to overexpression of GH47, GH76, and several hemicellulose debranching enzymes compared to the cultivation on the pretreated materials. T. terrestris grown on untreated, STEX180°C/auto and STEX210°C/auto induced three arabinofuranosidases of the GH43 and GH62 families; while growth on STEX210°C/H2SO4 induced a GH51 arabinofuranosidase and a GH115 glucuronidase. All secretomes contained five lytic polysaccharide monooxygenases of the AA9 family. Supplementation of Celluclast® + Novozym188 with the secretome obtained by growing the fungus grown on STEX180°C/auto achieved a twofold higher release of mannose from spruce steam-pretreated with acetic acid as catalyst, compared to the commercial enzyme cocktail alone.ConclusionsMinor changes in the structure and composition of spruce affect the composition of fungal secretomes, with differences in some classes explaining an increased hydrolytic efficiency. As demonstrated here, saccharification of spruce biomass with commercial enzyme cocktails can be further enhanced by supplementation with tailor-made secretomes.

Design of Plastic Binding Lytic Polysaccharide Monooxygenases via Modular Engineering

Design of Plastic Binding Lytic Polysaccharide Monooxygenases via Modular Engineering

Biochemical and structural insights of a recombinant AA16 LPMO from the marine and sponge-symbiont Peniophora sp

Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that oxidize polysaccharides, leading to their cleavage. LPMOs are classified into eight CAZy families (AA9-11, AA13-17), with the functionality of AA16 being poorly characterized. This study presents biochemical and structural data for an AA16 LPMO (PnAA16) from the marine sponge symbiont Peniophora sp. Phylogenetic analysis revealed that PnAA16 clusters separately from previously characterized AA16s. However, the structural modelling of PnAA16 showed the characteristic immunoglobulin-like fold of LPMOs, with a conserved his-brace motif coordinating a copper ion. The copper-bound PnAA16 showed greater thermal stability than its apo-form, highlighting copper's role in enzyme stability. Functionally, PnAA16 demonstrated oxidase activity, producing 5 μM H₂O₂ after 30 min, but showed 20 times lower peroxidase activity (0.27 U/g) compared to a fungal AA9. Specific activity assays indicated that PnAA16 acts only on cellohexaose, generating native celloligosaccharides (C3 to C5) and oxidized products with regioselective oxidation at C1 and C4 positions. Finally, PnAA16 boosted the activity of a cellulolytic cocktail for cellulose saccharification in the presence of ascorbic acid, hydrogen peroxide, or both. In conclusion, the present work provides insights into the AA16 family, expanding the understanding of their structural and functional relationships and biotechnological potential.

Improving the Catalytic Efficiency of an AA9 Lytic Polysaccharide Monooxygenase MtLPMO9G by Consensus Mutagenesis

Improving the Catalytic Efficiency of an AA9 Lytic Polysaccharide Monooxygenase MtLPMO9G by Consensus Mutagenesis

A modular enzyme with combined hemicellulose-removing and LPMO activity increases cellulose accessibility in softwood.

Because of the association with other complex polysaccharides, extracting and utilizing cellulose from lignocellulosic materials requires the combined action of a broad range of carbohydrate-active enzymes, including multiple glycoside hydrolases (GHs) and lytic polysaccharide monooxygenases (LPMOs). The interplay between these enzymes and the way in which Nature orchestrates their co-existence and combined action are topics of great scientific and industrial interest. To gain more insight into these issues, we have studied the lignocellulose-degrading abilities of an enzyme from Caldibacillus cellulovorans (CcLPMO10-Man5), comprising an LPMOdomain, a GH5 mannanase domain and two family 3 carbohydrate-binding modules (CBM3). Using a natural softwood substrate, we show that this enzyme promotes cellulase activity, i.e., saccharification of cellulose, both by removing mannan covering the cellulose and by oxidatively breaking up the cellulose structure. Synergy with CcLPMO10-Man5 was most pronounced for two tested cellobiohydrolases, whereas effects were smaller for a tested endoglucanase, which is in line with the notion that cellobiohydrolases and LPMOs attack the same crystalline regions of the cellulose, whereas endoglucanases attack semi-crystalline and amorphous regions. Importantly, the LPMO domain of CcLPMO10-Man5 is incapable of accessing the softwood cellulose in absence of the mannanase domain. Considering that LPMOs not bound to a substrate are sensitive to autocatalytic inactivation, this intramolecular synergy provides a perfect rationale for the evolution of modular enzymes such as CcLPMO10-Man5. The intramolecular coupling of the LPMO with a mannanase and two CBMs ensures that the LPMO is directed to areas where mannans are removed and cellulose thus becomes available.

A cellulose-binding domain specific for native crystalline cellulose in lytic polysaccharide monooxygenase from the brown-rot fungus Gloeophyllum trabeum

Cellulose-binding domains (CBDs) play a vital role in cellulose degradation by enzymes. Despite the strong ability of brown-rot fungi to degrade cellulose in wood, they have been considered to lack or have a low number of enzymes with CBD. Here, we report the C-terminal domain of a lytic polysaccharide monooxygenase from the brown-rot fungus Gloeophyllum trabeum (GtLPMO9A-2) functions as a CBD, classified as a new family of carbohydrate-binding module, CBM104. The amino acid sequence of GtCBM104 shows no similarity to any known CBDs. A BLAST search identified 84 homologous sequences at the C-terminus of some CAZymes, mainly LPMO9, in basidiomycetous genomes. Binding experiments revealed GtCBM104 binds selectively to native crystalline cellulose (cellulose I), but not to artificially modified crystalline or amorphous cellulose, while the typical fungal CBD (CBM1) bound to all cellulosic materials tested. The adsorption efficiency of GtCBM104 to cellulose I was >20-times higher than that of CBM1. Adsorption tests and microscopic observations strongly suggested that GtCBM104 binds to the hydrophilic regions of cellulose microfibrils, while CBM1 recognizes the hydrophobic surface. The discovery of GtCBM104 strongly suggests that the contribution of CBD to the cellulose enzymatic degradation mechanism of brown-rot fungi is much larger than previously thought.

The impact of the carbohydrate-binding module on how a lytic polysaccharide monooxygenase modifies cellulose fibers

BackgroundIn recent years, lytic polysaccharide monooxygenases (LPMOs) that oxidatively cleave cellulose have gained increasing attention in cellulose fiber modification. LPMOs are relatively small copper-dependent redox enzymes that occur as single domain proteins but may also contain an appended carbohydrate-binding module (CBM). Previous studies have indicated that the CBM “immobilizes” the LPMO on the substrate and thus leads to more localized oxidation of the fiber surface. Still, our understanding of how LPMOs and their CBMs modify cellulose fibers remains limited.ResultsHere, we studied the impact of the CBM on the fiber-modifying properties of NcAA9C, a two-domain family AA9 LPMO from Neurospora crassa, using both biochemical methods as well as newly developed multistep fiber dissolution methods that allow mapping LPMO action across the fiber, from the fiber surface to the fiber core. The presence of the CBM in NcAA9C improved binding towards amorphous (PASC), natural (Cell I), and alkali-treated (Cell II) cellulose, and the CBM was essential for significant binding of the non-reduced LPMO to Cell I and Cell II. Substrate binding of the catalytic domain was promoted by reduction, allowing the truncated CBM-free NcAA9C to degrade Cell I and Cell II, albeit less efficiently and with more autocatalytic enzyme degradation compared to the full-length enzyme. The sequential dissolution analyses showed that cuts by the CBM-free enzyme are more evenly spread through the fiber compared to the CBM-containing full-length enzyme and showed that the truncated enzyme can penetrate deeper into the fiber, thus giving relatively more oxidation and cleavage in the fiber core.ConclusionsThese results demonstrate the capability of LPMOs to modify cellulose fibers from surface to core and reveal how variation in enzyme modularity can be used to generate varying cellulose-based materials. While the implications of these findings for LPMO-based cellulose fiber engineering remain to be explored, it is clear that the presence of a CBM is an important determinant of the three-dimensional distribution of oxidation sites in the fiber.

On the pH Dependency of the Catalysis by a Lytic Polysaccharide Monooxygenase from the Fungus Trichoderma reesei

On the pH Dependency of the Catalysis by a Lytic Polysaccharide Monooxygenase from the Fungus <i>Trichoderma reesei</i>

Transcriptional and secretome analysis of Rasamsonia emersonii lytic polysaccharide mono-oxygenases

The current study is the first to describe the temporal and differential transcriptional expression of two lytic polysaccharide monooxygenase (LPMO) genes of Rasamsonia emersonii in response to various carbon sources. The mass spectrometry based secretome analysis of carbohydrate active enzymes (CAZymes) expression in response to different carbon sources showed varying levels of LPMOs (AA9), AA3, AA7, catalase, and superoxide dismutase enzymes pointing toward the redox-interplay between the LPMOs and auxiliary enzymes. Moreover, it was observed that cello-oligosaccharides have a negative impact on the expression of LPMOs, which has not been highlighted in previous reports. The LPMO1 (30 kDa) and LPMO2 (47 kDa), cloned and expressed in Pichia pastoris, were catalytically active with (kcat/Km) of 6.6×10-2 mg-1 ml min-1 and 1.8×10-2 mg-1 ml min-1 against Avicel, respectively. The mass spectrometry of hydrolysis products of Avicel/carboxy methyl cellulose (CMC) showed presence of C1/C4 oxidized oligosaccharides indicating them to be Type 3 LPMOs. The 3D structural analysis of LPMO1 and LPMO2 revealed distinct arrangements of conserved catalytic residues at their active site. The developed enzyme cocktails consisting of cellulase from R. emersonii mutant M36 supplemented with recombinant LPMO1/LPMO2 resulted in significantly enhanced saccharification of steam/acid pretreated unwashed rice straw slurry from PRAJ industries (Pune, India). The current work indicates that LPMO1 and LPMO2 are catalytically efficient and have a high degree of thermostability, emphasizing their usefulness in improving benchmark enzyme cocktail performance.Key points• Mass spectrometry depicts subtle interactions between LPMOs and auxiliary enzymes.• Cello-oligosaccharides strongly downregulated the LPMO1 expression.• Developed LPMO cocktails showed superior hydrolysis in comparison to CellicCTec3.

A Combination of Transcriptome and Enzyme Activity Analysis Unveils Key Genes and Patterns of Corncob Lignocellulose Degradation by Auricularia heimuer under Cultivation Conditions.

The cultivation of Auricularia heimuer, a species of edible mushroom, heavily relies on the availability of wood resources serving as substrate for the growth of the species. To ensure the sustainable development of the A. heimuer industry and optimize the utilization of corncob as a substrate, this study sought to investigate the potential use of corncob as a substrate for the cultivation of A. heimuer. The purpose of this study was to explore the utilization of corncob lignocellulose by A. heimuer at the mycelium, primordium, and fruiting stages, by specifically examining the expression profiles of both carbohydrate-active enzymes (CAZymes) and the transcriptome of differentially expressed genes (DEGs) relevant to corncob biomass degradation. The results revealed 10,979, 10,630, and 11,061 DEGs at the mycelium, primordium, and fruiting stages, respectively, while 639 DGEs were identified as carbohydrate-active enzymes. Of particular interest were 46 differentially expressed CAZymes genes that were associated directly with lignocellulose degradation. Furthermore, the study found that A. heimuer exhibited adaptive changes that enabled it to effectively utilize the cellulose present in the corncob. These changes were observed primarily at the primordium and fruiting stages. Key genes involved in lignocellulose degradation were also identified, including g6952, g8349, g12487, and g2976 at the mycelium stage, g5775, g2857, g3018, and g11016 at the primordium stage, and g10290, g2857, g12385, g7656, and g8953 at the fruiting stage. This study found that lytic polysaccharide monooxygenase (LPMO) played a crucial role in the degradation of corncob cellulose, further highlighting the complexity of the molecular mechanisms involved in the degradation of lignocellulose biomass by A. heimuer. The study sheds light on the molecular mechanisms underlying the ability of A. heimuer to degrade corncob biomass, with implications for the efficient utilization of lignocellulose resources. The findings from this study may facilitate the development of innovative biotechnologies for the transformation of corncob biomass into useful products.

High Degree of Polymerization of Chitin Oligosaccharides Produced from Shrimp Shell Waste by Enrichment Microbiota Using Two-Stage Temperature-Controlled Technique of Inducing Enzyme Production and Metagenomic Analysis of Microbiota Succession.

The direct enzymatic conversion of untreated waste shrimp and crab shells has been a key problem that plagues the large-scale utilization of chitin biological resources. The microorganisms in soil samples were enriched in two stages with powdered chitin (CP) and shrimp shell powder (SSP) as substrates. The enrichment microbiota XHQ10 with SSP degradation ability was obtained. The activities of chitinase and lytic polysaccharide monooxygenase of XHQ10 were 1.46 and 54.62 U/mL. Metagenomic analysis showed that Chitinolyticbacter meiyuanensis, Chitiniphilus shinanonensis, and Chitinimonas koreensis, with excellent chitin degradation performance, were highly enriched in XHQ10. Chitin oligosaccharides (CHOSs) are produced by XHQ10 through enzyme induction and two-stage temperature control technology, which contains CHOSs with a degree of polymerization (DP) more significant than ten and has excellent antioxidant activity. This work is the first study on the direct enzymatic preparation of CHOSs from SSP using enrichment microbiota, which provides a new path for the large-scale utilization of chitin bioresources.

Enhancing hydrolysis of lignocellulosic biomass through molecular modification of lytic polysaccharide monooxygenase from Aspergillus niger

Enhancing hydrolysis of lignocellulosic biomass through molecular modification of lytic polysaccharide monooxygenase from Aspergillus niger

Heterologous Expression and Biochemical Characterization of a Novel Lytic Polysaccharide Monooxygenase from Chitinilyticum aquatile CSC-1.

Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that catalyze the oxidative cleavage of recalcitrant polysaccharides. There are limited reports on LPMOs capable of concurrently catalyzing the oxidative cleavage of both cellulose and chitin. In this study, we identified and cloned a novel LPMO from the newly isolated bacterium Chitinilyticum aquatile CSC-1, designated as CaLPMO10. When using 2, 6-dimethylphenol (2, 6-DMP) as the substrate, CaLPMO10 exhibited optimal activity at 50 °C and pH 8, demonstrating good temperature stability at 30 °C. Even after a 6 h incubation at pH 8 and 30 °C, CaLPMO10 retained approximately 83.03 ± 1.25% residual enzyme activity. Most metal ions were found to enhance the enzyme activity of CaLPMO10, with ascorbic acid identified as the optimal reducing agent. Mass spectrometry analysis indicated that CaLPMO10 displayed oxidative activity towards both chitin and cellulose, identifying it as a C1/C4-oxidized LPMO. CaLPMO10 shows promise as a key enzyme for the efficient utilization of biomass resources in future applications.

In situ imaging of LPMO action on plant tissues

Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that oxidatively cleave recalcitrant polysaccharides such as cellulose. Several studies have reported LPMO action in synergy with other carbohydrate-active enzymes (CAZymes) for the degradation of lignocellulosic biomass but direct LPMO action at the plant tissue level remains challenging to investigate. Here, we have developed a MALDI-MS imaging workflow to detect oxidised oligosaccharides released by a cellulose-active LPMO at cellular level on maize tissues. Using this workflow, we imaged LPMO action and gained insight into the spatial variation and relative abundance of oxidised and non-oxidised oligosaccharides. We reveal a targeted action of the LPMO related to the composition and organisation of plant cell walls.

Action of AA9 lytic polysaccharide monooxygenase enzymes on different cellulose allomorphs

Lytic polysaccharide monooxygenase (LPMO)-catalyzed oxidative processes play a major role in natural biomass conversion. Despite their oxidative cleavage at the surface of polysaccharides, understanding of their mode of action, and the impact of structural patterns of the cellulose fiber on LPMO activity is still not fully understood. In this work, we investigated the action of two different LPMOs from Podospora anserina on celluloses showing different structural patterns. For this purpose, we prepared cellulose II and cellulose III allomorphs from cellulose I cotton linters, as well as amorphous cellulose. LPMO action was monitored in terms of surface morphology, molar mass changes and monosaccharide profile. Both PaLPMO9E and PaLPMO9H were active on the different cellulose allomorphs (I, II and III), and on amorphous cellulose (PASC) whereas they displayed a different behavior, with a higher molar mass decrease observed for cellulose I. Overall, the pretreatment with LPMO enzymes clearly increased the accessibility of all types of cellulose, which was quantified by the higher carboxylate content after carboxymethylation reaction on LPMO-pretreated celluloses. This work gives more insight into the action of LPMOs as a tool for deconstructing lignocellulosic biomass to obtain new bio-based building blocks.

Sequence and structure analyses of lytic polysaccharide monooxygenases mined from metagenomic DNA of humus samples around white-rot fungi in Cuc Phuong tropical forest, Vietnam

Background White-rot fungi and bacteria communities are unique ecosystems with different types of symbiotic interactions occurring during wood decomposition, such as cooperation, mutualism, nutritional competition, and antagonism. The role of chitin-active lytic polysaccharide monooxygenases (LPMOs) in these symbiotic interactions is the subject of this study. Method In this study, bioinformatics tools were used to analyze the sequence and structure of putative LPMOs mined by hidden Markov model (HMM) profiles from the bacterial metagenomic DNA database of collected humus samples around white-rot fungi in Cuc Phuong primary forest, Vietnam. Two genes encoding putative LPMOs were expressed in E. coli and purified for enzyme activity assay. Result Thirty-one full-length proteins annotated as putative LPMOs according to HMM profiles were confirmed by amino acid sequence comparison. The comparison results showed that although the amino acid sequences of the proteins were very different, they shared nine conserved amino acids, including two histidine and one phenylalanine that characterize the H1-Hx-Yz motif of the active site of bacterial LPMOs. Structural analysis of these proteins revealed that they are multidomain proteins with different functions. Prediction of the catalytic domain 3-D structure of these putative LPMOs using Alphafold2 showed that their spatial structures were very similar in shape, although their protein sequences were very different. The results of testing the activity of proteins GL0247266 and GL0183513 show that they are chitin-active LPMOs. Prediction of the 3-D structures of these two LPMOs using Alphafold2 showed that GL0247266 had five functional domains, while GL0183513 had four functional domains, two of which that were similar to the GbpA_2 and GbpA_3 domains of protein GbpA of Vibrio cholerae bacteria. The GbpA_2 - GbpA_3 complex was also detected in 11 other proteins. Based on the structural characteristics of functional domains, it is possible to hypothesize the role of chitin-active GbpA-like LPMOs in the relationship between fungal and bacterial communities coexisting on decomposing trees in primary forests.

Synthetic Copper-(Di)oxygen Complex Generation and Reactivity Relevant to Copper Protein O2-Processing.

Synthetic copper-dioxygen complex design, generation and characterization, play a crucial role in elucidating the structure/function of copper-based metalloenzymes, including dopamine β-monooxygenase, lytic polysaccharide monooxygenases, particulate methane monooxygenase, tyrosinase, hemocyanin, and catechol oxidase. Designing suitable ligands to closely mimic the variable active sites found in these enzymes poses a challenging task for synthetic bioinorganic chemists. In this review, we have highlighted a few representative ligand systems capable of stabilizing various copper-dioxygen species such as CuII-(O2 •-)(superoxide), Cu2 II-(μ-η 1:η 1-O2 2-) (trans/cis-peroxide), Cu2 II-(μ-η 2:η 2-O2 2-)(side-on peroxide) and Cun II--OOH (hydroperoxide) species. Here, we discuss the ligand type utilized, syntheses, and spectroscopic characterization of these species. We also delineate reactivity patterns, particularly electrophilic arene hydroxylation by a side-on peroxo species which occurs via a "NIH shift" mechanism and thermodynamic-kinetic relationships among Cu2-(O2 •-)/O2 2-/-OOH moieties.

Integrated Experimental and Theoretical Investigation of Copper Active Site Properties of a Lytic Polysaccharide Monooxygenase from Serratia marcescens.

In this paper, we employed a multidisciplinary approach, combining experimental techniques and density functional theory (DFT) calculations to elucidate key features of the copper coordination environment of the bacterial lytic polysaccharide monooxygenase (LPMO) from Serratia marcescens (SmAA10). The structure of the holo-enzyme was successfully obtained by X-ray crystallography. We then determined the copper(II) binding affinity using competing ligands and observed that the affinity of the histidine brace ligands for copper is significantly higher than previously described. UV-vis, advanced electron paramagnetic resonance (EPR), and X-ray absorption spectroscopy (XAS) techniques, including high-energy resolution fluorescence detected (HERFD) XAS, were further used to gain insight into the copper environment in both the Cu(II) and Cu(I) redox states. The experimental data were successfully rationalized by DFT models, offering valuable information on the electronic structure and coordination geometry of the copper center. Finally, the Cu(II)/Cu(I) redox potential was determined using two different methods at ca. 350 mV vs NHE and rationalized by DFT calculations. This integrated approach not only advances our knowledge of the active site properties of SmAA10 but also establishes a robust framework for future studies of similar enzymatic systems.

Comparative genomic analysis of Planctomycetota potential for polysaccharide degradation identifies biotechnologically relevant microbes

BackgroundMembers of the Planctomycetota phylum harbour an outstanding potential for carbohydrate degradation given the abundance and diversity of carbohydrate-active enzymes (CAZymes) encoded in their genomes. However, mainly members of the Planctomycetia class have been characterised up to now, and little is known about the degrading capacities of the other Planctomycetota. Here, we present a comprehensive comparative analysis of all available planctomycetotal genome representatives and detail encoded carbohydrolytic potential across phylogenetic groups and different habitats.ResultsOur in-depth characterisation of the available planctomycetotal genomic resources increases our knowledge of the carbohydrolytic capacities of Planctomycetota. We show that this single phylum encompasses a wide variety of the currently known CAZyme diversity assigned to glycoside hydrolase families and that many members encode a versatile enzymatic machinery towards complex carbohydrate degradation, including lignocellulose. We highlight members of the Isosphaerales, Pirellulales, Sedimentisphaerales and Tepidisphaerales orders as having the highest encoded hydrolytic potential of the Planctomycetota. Furthermore, members of a yet uncultivated group affiliated to the Phycisphaerales order could represent an interesting source of novel lytic polysaccharide monooxygenases to boost lignocellulose degradation. Surprisingly, many Planctomycetota from anaerobic digestion reactors encode CAZymes targeting algal polysaccharides – this opens new perspectives for algal biomass valorisation in biogas processes.ConclusionsOur study provides a new perspective on planctomycetotal carbohydrolytic potential, highlighting distinct phylogenetic groups which could provide a wealth of diverse, potentially novel CAZymes of industrial interest.