Luque Rods Research Articles

Spinopelvic fixation: indications, anatomical and biomechanical aspects and historical development of methods

A review of the literature on performing spinopelvic fixation for injuries and various pathologies of the spine and pelvis is presented. The review is analytical in nature and was carried out using databases of medical literature and search resources of PubMed and eLibrary. The following aspects are highlighted: the relevance and indications for performing spinopelvic fixation and its anatomical and biomechanical features. The historical aspects of the development of methods for performing spinopelvic fixation are considered and structured. The analysis of various methods of spinopelvic fixation (using hooks, screw insertion into the S2 sacral wings, L-shaped Luque rods, distractors, transiliac rods, Jackson, Harrington and Galveston techniques) was carried out. The features of surgical techniques, their advantages, disadvantages and complications are considered.

2213 Spinal Rod Migration and Pelvic Perforation in a Patient with Severe Cerebral Palsy and Scoliosis

Video Objective To describe a rare occurrence of spinal hardware migration and perforation into the pelvic peritoneum. To describe the evaluation of the pelvic organs with perforating trauma. Setting Academic university affiliated tertiary care center. Interventions Cerebral palsy refers to a heterogeneous group of conditions involving permanent nonprogressive central motor dysfunction that affect muscle tone, posture, and movement. It can be associated with neuromuscular scoliosis which can cause large curves in the spine and pelvic obliquity necessitating spinal and pelvic fusion and fixation. Hardware failures from these surgeries are rare however do occur with increased incidence in patients with risk factors such as ongoing severe contractures of the spine. Specifically, the Luque rod has been associated with complications and even pelvic cortex perforation. This video describes a rare occurrence of a Luque rod perforation from the spine and bony pelvis into the retroperitoneum and perforation into the pelvis. We show an evaluation of the potential trauma sites and highlight the location of this rod in relation to the surrounding vital pelvic structures. Conclusion We report a rare occurrence of spinal hardware migration and perforation into the pelvic peritoneal cavity. Multispecialty surgical planning and coordination is extremely important. Many contingent surgical plans are necessary prior to the operating room for optimal outcomes.

Decompression and instrumentation without fusion for spinal metastases: Loosening rate and consequences

Background/PurposeFor patients with spinal metastases, decompression surgery was usually followed by instrumentation without fusion. Over time, mechanical stress would lead to loosening of implants. Yet, there is a lack of studies concerning the loosening rate, or the impact on patients when the implants are loosened. We aim at finding the postoperative loosening rate of implant, postoperative survivorship of patients, as well as their correlation with the mode of instrumentation. MethodsA retrospective study including patients with metastatic spinal cord compression, who received decompression and instrumentation without fusion in a local hospital in Hong Kong from 2007 to 2014 was carried out. Patients with primary spinal tumour or prior spinal fusion were excluded. Demographics, tumour characteristics, mode of instrumentation, loosening rate of implants, as well as survivorship of patients were retrieved. Radiographs at 1 year postoperation were counter-examined by 2 Orthopaedic specialists on the Electronic Patient Record System. ResultsTotal of 65 operations were retrieved. The age ranged from 27 to 84 years old. The most frequent primary source of malignancy was lung (26.5%), followed by breast (24.62%). Thoracic level (60%) was the most frequent site of spinal metastases. The survivorship at 1 year postoperation was 61.54%. The overall loosening rate of implants was 44.44%, with the Luque rods and sublaminar wire system being the most (70%). None of the cases required revision or removal of implants at 1 year postoperation. ConclusionThe loosening rate of implants was high, and it is expected to grow even higher as oncological patients continue to improve in their survivorship with the medical advances such as target therapy. Yet there is still no definite evidence on how the implant loosening would affect patients' quality of life and clinical performance.

Pediatric spine imaging post scoliosis surgery.

Many orthopedic articles describe advances in surgical techniques and implants used in pediatric scoliosis surgery. However, even though postoperative spine imaging constitutes a large portion of outpatient musculoskeletal pediatric radiology, few, if any, radiology articles discuss this topic. There has been interval advancement over the last decades of the orthopedic procedures used in the treatment of spinal scoliosis in adolescents with idiopathic scoliosis. The goal of treatment in these patients is to stop the progression of the curve by blocking the spinal growth and correcting the deformity as much as possible. To that end, the authors in this paper discuss postoperative imaging findings of Harrington rods, Luque rods, Luque-Galveston implants and segmental spinal fusion systems. Regarding early onset scoliosis, the guiding principles used for adolescent idiopathic scoliosis do not apply to a growing spine because they would impede lung development. As a result, other devices have been developed to correct the curve and to allow spinal growth. These include spine-based growing rods, vertically expandable prosthetic titanium rods (requiring repetitive surgeries) and magnetically controlled growing rods (with a magnetic locking/unlocking system). Other more recent systems are Shilla and thoracoscopic anterior vertebral body tethering, which allow guided growth of the spine without repetitive interventions. In this paper, we review the radiologic appearances of different orthopedic implants and techniques used to treat adolescent idiopathic scoliosis and early onset scoliosis. Moreover, we present the imaging findings of the most frequent postoperative complications.

Congenital subaxial cervical subluxation presenting as a bilateral Erb’s palsy: surgical management, rehabilitation, and outcome

Subaxial spine injuries during infancy are uncommon. We present the case of an infant referred to our brachial plexus clinic with proximal weakness of both arms noted immediately following a complicated breech delivery. Nerve conduction studies were consistent with bilateral proximal upper plexus injury; however, radiological evaluation revealed a C4-C5 subluxation and MRI features of bilateral C5 root avulsions. He was immobilized in a cervical-body orthosis and underwent open reduction and posterior C4-C5-C6 fixation at 10weeks age using luque rods, sublaminar wires, and rib graft. The spine was immobilized in a custom molded cervicothoracic brace for a total of 3months, and a home exercise program prescribed. Follow-up radiographic evaluation showed good posterior bony fusion by 2months but persistent bilateral proximal upper limb weakness with reduced compound motor action potential (CMAP) amplitudes of the axillary and musculocutaneous nerves. Bilateral supraclavicular exploration and C5 root neurotization using the ipsilateral C7 nerve roots were performed at 7months of age. Voluntary biceps activity followed by voluntary external rotation with gravity eliminated was noted within the next 2-3months. He progressed to develop near normal motor control of bilateral upper limbs within 1year. We wish to report this rare entity and our favorable outcome using a strategy of early spinal stabilization and neurotization repair to restore function following proximal nerve root injury.

KYPHECTOMY IN PATIENTS WITH MYELOMENINGOCELE: SURGICAL RESULTS AND COMPLICATIONS

Objectives:The lumbar kyphosis in patients with myelomeningocele is a complex deformity whose treatment is mainly surgical. The objective of this study is to summarize the results and complications obtained by the group in 2012 with respect to this group of patients.Method:Performed a retrospective analysis of the medical records and radiographs of patients consecutively operated in 2012. The technique was originally described by Dunn-McCarthy and consists of kyphectomy and posterior fixation using S-shaped Luque rods through the foramina of S1 associated with pedicle screws in the thoracic spine.Results:Six patients were included in the study. The age at surgery was 11 years and 7±22 months and the weight was 29.1±11.9 kg. The procedure lasted 271±87 minutes, with the removal of one or two (mean 1.5) vertebrae from the apex of the kyphosis. Hospitalization time was 10±9 days. The lumbar kyphosis measuring 116.3±37 degrees preoperatively was reduced to 62.5±21 degrees. All patients began to sit without support and to lie in the supine position. Four patients developed postoperative infection and required surgical debridement at the follow-up. One patient had the implant removed after a year due to loosening of the rod in the sacrum.Conclusion:The surgical technique allows excellent functional results in the correction of lumbar kyphosis in patients with myelomeningocele despite high complication rates. It is necessary to conduct studies with a larger number of patients and duration of follow-up to assess whether the use of pedicle screws will decrease the rate of loosening and pseudoarthrosis.

A new technic for segmental spinal osteosynthesis using the posterior approach

The authors have designed a new method of instrumentation aimed at obtaining surgical fixation of the scoliotic curve without any postoperative external immobilisation. It is particularly strong and rigid and allows adequate reduction of the curve. This technique avoids the sublaminar space and thus prevents excessive blood loss and diminishes the danger of cord damage. The instrumentation is made of two parallel rough cylindrical rods inserted independently in the convexity and concavity of the curve. If necessary, they can be bent pre-operatively. They are attached to hooks placed on the laminae or pedicles, which are locked by bolts, thus allowing progressive straightening of the curve. They are joined by two transverse bars, one above and one below, to provide better rigidity to the device and to allow correction of rotation. The parts of the vertebrae left free by the device are denuded to allow the addition of grafts. Laboratory tests have demonstrated that this type of fixator is more rigid than the Harrington or Luque rods. Fifteen patients, either idiopathic or paralytic cases, were operated on without any neurological impairment. No loss of correction was observed since the hooks have been locked.

Old and New Fashion: Minimally Invasive Spine Surgery for Adjacent Segmental Spinal Stenosis after Luque Sublaminar Wiring and Posterolateral Fusion: Case Report

Study Design: A case report. Objectives: To report a rare case of minimally invasive spine surgery after sublaminar wiring fixation with Luque rods. Summary of Literature Review: In the past, sublaminar wiring fixation with Luque rods was believed to be an effective fixation method; however, the development of transpedicular fixation resulted in the discontinuation of this method. Currently, instead of classical surgery using a broad incision, minimally invasive spine surgery is performed, which has a multitude of advantages. Material and Methods: Initially, the patient underwent Luque sublaminar wiring and posterolateral fusion. After 25 years, minimally invasive TLIF and percutaneous transpedicular fixation were performed for the adjacent segmental spinal stenosis. Results: A good bone union is developing with an excellent clinical outcome, 14 months after the surgery. Conclusions: We report a very rare case of a patient who underwent Luque sublaminar wiring and then, 25 years later, had spine surgery with minimally invasive techniques.

Current concepts and controversies on adolescent idiopathic scoliosis: Part II

A new era in the surgical treatment of adolescent idiopathic scoliosis (AIS) opened with the introduction of pedicle screw instrumentation, which provides 3-column vertebral fixation and allows major deformity correction on the coronal, sagittal, and axial planes. A steep learning curve can be expected for spinal surgeons to become familiar with pedicle screw placement and correction techniques. Potential complications including injury to adjacent neural, vascular, and visceral structures can occur due to screw misplacement or pull-out during correction maneuvers. These major complications are better recognized as pedicle screw techniques become more popular and may result in serious morbidity and mortality. Extensive laboratory and clinical training is mandatory before pedicle screw techniques in scoliosis surgery are put to practice. Wider application, especially in developing countries, is limited by the high cost of implants. Refined correction techniques are currently developed and these utilize a lesser number of pedicle anchors which are strategically positioned to allow optimum deformity correction while reducing the neurological risk, surgical time, and blood loss, as well as instrumentation cost. Such techniques can be particularly attractive at a time when cost has major implications on provision of health care as they can make scoliosis treatment available to a wider population of patients. Pedicle screw techniques are currently considered the gold standard for scoliosis correction due to their documented superior biomechanical properties and ability to produce improved clinical outcomes as reflected by health-related quality-of-life questionnaires. Ongoing research promises further advances with the future of AIS treatment incorporating genetic counseling and possibly fusionless techniques.

Current concepts and controversies on adolescent idiopathic scoliosis: Part I

Adolescent idiopathic scoliosis is the most common spinal deformity encountered by General Orthopaedic Surgeons. Etiology remains unclear and current research focuses on genetic factors that may influence scoliosis development and risk of progression. Delayed diagnosis can result in severe deformities which affect the coronal and sagittal planes, as well as the rib cage, waistline symmetry, and shoulder balance. Patient's dissatisfaction in terms of physical appearance and mechanical back pain, as well as the risk for curve deterioration are usually the reasons for treatment. Conservative management involves mainly bracing with the aim to stop or slow down scoliosis progression during growth and if possible prevent the need for surgical treatment. This is mainly indicated in young compliant patients with a large amount of remaining growth and progressive curvatures. Scoliosis correction is indicated for severe or progressive curves which produce significant cosmetic deformity, muscular pain, and patient discontent. Posterior spinal arthrodesis with Harrington instrumentation and bone grafting was the first attempt to correct the coronal deformity and replace in situ fusion. This was associated with high pseudarthrosis rates, need for postoperative immobilization, and flattening of sagittal spinal contour. Segmental correction techniques were introduced along with the Luque rods, Harri-Luque, and Wisconsin systems. Correction in both coronal and sagittal planes was not satisfactory and high rates of nonunion persisted until Cotrel and Dubousset introduced the concept of global spinal derotation. Development of pedicle screws provided a powerful tool to correct three-dimensional vertebral deformity and opened a new era in the treatment of scoliosis.

Treatment of Neuromuscular Scoliosis with Posterior Spinal Fusion Using the Galveston Procedure: Retrospective of Eight Years of Experience with Unit Rod Instrumentation

Posterior spinal fusion with instrumentation to the pelvis (the Galveston Procedure) is widely accepted as an effective treatment for neuromuscular scoliosis. Unit rod instrumentation is commonly used in these cases, but it is not universally accepted as superior to separate Luque rods. This study is a retrospective review of 115 consecutive cases in which the unit rod was used. The following statistics were collected from the records of these patients: operative time, estimated blood loss, PICU stay, hospital stay, transfusion rate, complication rate, scoliosis correction, and correction of pelvic obliquity . Results at 2-year follow-up were compared to those reported in the literature and to results previously reported from the same facility in which separate Luque rods were used. The unit rod provides excellent control of pelvic obliquity and superior scoliosis correction compared with separate Luque rods. Improvements were also found in reduced operative times, lower blood loss, a lower complication rate, and shorter hospital stay.

Case report: 122° kyphosis secondary to C5–L3 laminectomy and quadriplegia, surgical correction and 30-year follow-up

The study design was a case report with 30-year follow-up. In 1980, there were no pedicle screws available, so it was a great challenge to achieve correction and fusion in a patient with no laminae, and who was quadriplegic. Such a case with such a long follow-up has not been previously reported. This is a single case report with an ultra-long follow-up. The patient underwent an anterior fusion from T3 to L4 via two incisions, and at a second stage, a posterior fusion from T3 to S1 using Luque rods and wires passed through the foramenae. After 2 years he underwent repair of two pseudarthroses with both anterior and posterior procedures. He achieved solid fusion following the pseudarthrosis repair. Although being a C7 quadriplegic all his life, he is totally independent in his activities of daily living, and is fully employed. Correction and fusion can be achieved even in the absence of laminae and pedicle screws.

Long-term outcome of surgical correction of congenital kyphosis in patients with myelomeningocele (MMC) with segmental spino-pelvic fixation

Study design: A retrospective case series of patients with myelomeningocele (MMC) who underwent kyphectomy and posterior segmental fixation using Luque rods and 16-gauge wires.Objective: To assess outcomes after posterior kyphectomy and segmental fixation for kyphosis in patients with MMC.Methods: Thirteen consecutive patients who underwent posterior kyphectomy for transforaminal fixation contiguous to “everted lamina.” Fusion rates, time to fusion, change in Cobb angle, complications, and improvement in activities of daily living using the Katz score were measured.Results: Average age at time of surgery was 9.2 (range, 4.5–17) years. Average time to follow-up was 120 (range, 20–310) months. Solid fusion was achieved in 9 patients (69%) with a mean time to fusion of 12 months. The mean postoperative kyphotic curve was 22° with an average correction of 90°. Five patients (38%) experienced a postoperative complication. The mean improvement in activities of daily living score was 1.6 points and all patients achieved independent sitting balance.Conclusion: Segmental spino-pelvic fixation is a solid alternative mode of fixation in patients with MMC with congenital kyphosis. Patient selection, proper perioperative multidisciplinary assessment, and surgeons' expertise are significant in the success of this complex surgery.Methods evaluation and class of evidence (CoE)Study design: Prospective cohort Retrospective cohort Case control Case series•Methods Patients at similar point in course of treatment• Follow-up ≥ 85%• Similarity of treatment protocols for patient groups• Patients followed-up long enough for outcomes to occur Control for extraneous risk factorsOverall class of evidenceIVThe definiton of the different classes of evidence is available on page 63.

Hardware failure and spinal pseudoarthrosis causing autonomic dysreflexia: a report of two cases

Case report. To describe two cases of hardware failure with pseudoarthrosis causing autonomic dysreflexia. The first patient was a 24-year-old woman with T3 ASIA (American Spinal Injury Association)-A paraplegia who developed complete failure and breakage of the Luque rods at the T11-12 region. The second woman was a 36-year-old T5 ASIA-A complete paraplegic who fractured her Harrington rods at T12 and L1 bilaterally. Saskatoon City Hospital, Saskatchewan, Canada. Both patients underwent operation for surgical fixation. In both cases, stabilization and fusion of the spinal deformity abolished the autonomic dysreflexia. Owing to the failure of spine-stabilizing hardware, sitting upright may cause an afferent stimulus that triggers the onset and worsening of symptoms associated with autonomic dysreflexia. Therefore, in contrast to current acute treatment regimes, lying down may be preferred to sitting upright (to decrease blood pressure) as a means to relieve the afferent stimulus. Surgical correction and hardware replacement alleviated the symptoms in these two patients.

Atlantoaxial subluxation–induced myelopathy in cleidocranial dysplasia

The authors describe the clinical course and treatment of a patient with cleidocranial dysplasia in whom spastic myelopathy developed due to atlantoaxial subluxation. This 27-year-old woman with cleidocranial dysplasia and a history of atlantoaxial subluxation presented with spastic myelopathy. Surgery was performed twice for cervical myelopathy and atlantoaxial subluxation, including laminectomy at the atlas and cervicooccipital fusion in which the Luque rod system was used, as well as C1-2 fusion via the transpharyngeal route. Solid bone fusion was achieved by 7 months postsurgery. Postoperative magnetic resonance imaging studies demonstrated that spinal cord compression was relieved, but atrophy persisted. At 2 years postsurgery there was no neurological disease progression, but spasticity persisted. The patient could walk with a cane. Cleidocranial dysplasia is an extremely rare cause of myelopathy in patients with atlantoaxial subluxation; the authors know of only two reports of this condition. When managing cleidocranial dysplasia, the practitioner should always be aware that atlantoaxial subluxation may be the cause of cervical myelopathy.

The Migration of a Broken Luque Rod

An exceedingly rare complication of Luque segmental spinal instrumentation in spinal fractures is described. A patient was treated for fractures of the eighth and ninth thoracic vertebra associated with traumatic paraplegia using Luque segmental spinal instrumentation. Ten years postoperatively, broken rods and sublaminar wires were found. One of the broken rods migrated caudad penetrating the sacrum and protruding into the pelvic cavity. The rod had projected into the rectum, and was extracted through the wall of the rectum and the anus. This case report emphasizes the importance of careful surgical technique and long-term follow up for patients who had undergone spinal instrumentation surgery.

A case report of myelopathy with metallosis 10 years later after cervical spine posterior fusion using Luque rod

A case report of myelopathy with metallosis 10 years later after cervical spine posterior fusion using Luque rod

The Superior Mesenteric Artery Syndrome in Patients with Spinal Deformity

A retrospective review. To determine the incidence of the superior mesenteric artery syndrome (SMAS) after surgical correction for scoliosis and if it is influenced by newer derotation/translation surgical systems. The SMAS is a known complication after surgery. Of 2939 charts reviewed, 17 patients between 1960 and 2002 matched inclusion criteria. Our incidence of the SMAS was 0.5%. Onset of symptoms was 7.2 days. Several scoliosis diagnoses were included in the study group. Instrumentation that was used included: nondistraction systems (n = 14), Harrington rod with body cast (n = 1), Luque rod with sublaminar wires (n = 1), and casted in situ posterior spinal fusion (n = 1). Before surgery, 10 of 17 patients weighed less than the 50th percentile. Mean preoperative BMI was 18.6 kg/cm/cm. Postoperative height gain averaged 3.175 cm, and weight loss at onset of symptoms averaged 4.5 kg. There were 14 patients who required nasogastric suction for an average duration of 10.2 days, 11 required hyperalimentation, and 5 concurrently received hyperalimentation with enteric feeding. The SMAS recurred in 2 patients. Postoperative weight loss appears to be more important for the development of the SMAS than asthenic body type. Newer derotation/translation corrective techniques have not eliminated the SMAS. Gastrointestinal imaging is indicated when nausea and vomiting occur 6-12 days after surgery, associated with early satiety and normal bowel sounds. Decompression and nutritional support remain the mainstays of treatment.

History of instrumentation for stabilization of the subaxial cervical spine.

In the past several decades methods have been developed to stabilize the subaxial cervical spine both posteriorly and anteriorly. Methods of posterior stabilization have progressed from interspinous wiring, through facet wiring and sublaminar wiring, to the lateral mass screws with plates and rods that are in use today. Plates for anterior stabilization have evolved from rigid plates requiring bicortical screws through those used with unicortical locking screws, to dynamic load-sharing plates used with variable angle screws. The original description of spinous process wiring was published by Hadra in 1891. In 1942 Rogers described the interspinous wiring method used for trauma-induced cervical instability, which was modified by Bohlman in 1985 (triple wiring technique). Luque rods with sublaminar wires were introduced in the late 1970s to address multilevel and occipitocervical instability. Facet wiring was developed in 1977 by Callahan to address the problem of stabilization when laminae are not present. Wiring remained the method used until Roy-Camille introduced the lateral mass screw-plate construct in the 1980s. The first plate for anterior stabilization was designed by Orozco and Llovet in 1970 and was later refined by Caspar; this was a rigid plate with bicortical screws. Morscher devised unicortical locking screws in the 1980s. The latest concept of dynamic load-sharing plates with variable angle screws was developed in 2000. In this article historical landmarks in surgical methods for the stabilization of the subaxial cervical spine are reviewed.

骨粗しょう性脊椎骨折術後の新規椎体骨折発生について

Over a period of 14 years from 1986 to 2000, we surgically treated 42 cases of delayed paraparesis following osteoporotic vertebral fracture. Anterior decompression and spinal fusion using instrumentation were performed on 15 patients, posterior decompression and fixation using Luque rod on 26 patients, and postlateral lumbar fusion with pedicle screwing on one, Seven cases of other vertebral fractures were observed after operation. The interval between operation and fracture recognized radiographically ranged from 5 to 37 months (mean, 17 months). Although these cases were treated conservatively, more careful observation is necessary in osteoporotic spines.