Lupin Yield Research Articles

Perspective herbicides for post-sowing use in narrow-leafed lupin crops

Technical and economic efficiency of Pilot herbicide when applied on green leaf in narrow-leafed lupine crops was studied. The research was conducted in field and plot experiments according to the generally accepted methods in the southwestern part of the Non-Chernozem zone of Russia. The soil of the experimental field was gray forest light loamy in mechanical composition. The following application rates of the preparation were used: 1.5, 2.0 and 2.5 l/ha in the phase of appearance of two true leaves in lupine. The following plants showed high sensitivity even at the minimum application rate: cleavers (Galium aparine L.), wild buckwheat (Fallopia convolvulus L.), lamb's-quarters (Chenopodium album L.), one of the types of hemp nettle (Galeopsis sp. L.), shepherd's purse (Capsella bursa pastoris L. Medik), field violet (Viola arvensis Murr.), chickweed (Stellaria media L.). Application of GalactAlt graminicide (application rate 1.0 l/ha) after treatment of narrow-leafed lupine crops with Pilot herbicide promoted almost complete destruction of annual grass weeds. Application of Pilot herbicide had a favorable effect on nitrogen content in both dry aboveground mass and root mass of lupine. Reduction of weediness of crops when using Pilot contributed to the increase in lupine yield. In the variant with the application of 1.5 l/ha of the herbicide, the average yield of narrow-leafed lupine seeds exceeded the control by 0.53 t/ha in three years of the trials. The highest increase in seed yield of narrow-leafed lupine (0.96 t/ha) was observed in the variant that involved the application of herbicide Pilot at a concentration of 1.5 l/ha in the phase of one or two true leaves in lupine and herbicide GalactAlt at a concentration of 1.0 l/ha in the phase of lupine budding. Chemical analyses showed an increase in crude protein content in narrow-leafed lupine seeds by 2.3–4.2% when the crops were treated with Pilot herbicide compared to the control variant, where the treatment was not carried out.

Comparison of Yield and Important Seed Quality Traits of Selected Legume Species

Legumes are of great economic importance. Depending on the species, they are cultivated for food, fodder, green manure, and even as ornamentals. Legume seeds contain many valuable nutrients and also anti-nutritional substances. The aim of the study is to compare important seed quality traits in pea (Pisum sativum L.), faba bean (Vicia faba L.), white lupin (Lupinus albus L.), narrow-leafed lupin (Lupinus angustifolius L.), and yellow lupine (Lupinus luteus L.) to soybean (Glycine max (L.) Merr.). It was shown that the obtained parameters were significantly affected by the interaction of species with the years of study. Soybean was characterized by high seed and protein yield and favorable seed chemical composition (protein, fat, phosphorus, potassium, magnesium, and micronutrients, except manganese). Faba bean yields were high but varied over the years. Faba bean seeds were rich in phosphorus and copper. Pea yielded satisfactorily, and the seeds contained high iron and low fiber contents. Of the three lupin species, white lupin yielded the highest, while narrow-leafed and yellow lupin yields were low. However, yellow lupin seeds had a favorable chemical composition because they were rich in protein, calcium, phosphorus, magnesium, copper, and zinc. In conclusion, legumes are valued worldwide and could be a base for the development of many functional foods to promote human health.

Methyl jasmonate‐induced resistance to Delia platura (Diptera: Anthomyiidae) in Lupinus mutabilis

Andean lupin (Lupinus mutabilis Sweet) is an important leguminous crop from South America with a high protein content. In Ecuador, lupin yields are severely affected by the infestation of Delia platura larvae on germinating seeds. The application of elicitor molecules with activity against herbivorous insects to control D. platura infestation constitutes an unexplored and promising alternative for chemical insecticides. In this study, methyl jasmonate (MeJA), hexanoic acid, menadione sodium bisulfite, and DL-β-aminobutyric acid were evaluated for their ability to induce resistance against D. platura in three commercial lupin cultivars. Only seeds pretreated with MeJA significantly impaired insect performance during choice and no-choice assays. Additionally, fitness indicators such as seed germination and growth were not affected by MeJA treatment. To investigate the molecular mechanisms behind the MeJA-mediated resistance, RT-qPCR assays were performed. First, RT-qPCR reference genes were validated, showing that LmUBC was the most stable reference gene. Next, expression analysis over time revealed that MeJA application up-regulated the activity of the jasmonic acid biosynthetic genes LmLOX2 and LmAOS, together with other jasmonate-related defense genes, such as LmTPS1, LmTPS4, LmPI2, LmMBL, LmL/ODC, LmCSD1, and LmPOD. This study indicates that MeJA can be used as an environmentally friendly elicitor molecule to protect Andean lupin from D. platura attack without fitness cost. MeJA application induces plant defense responses to insects in Andean lupin that may be modulated by the onset of terpenoid biosynthesis, proteinase inhibitors, lectins, polyamines, and antioxidative enzymes. © 2021 Society of Chemical Industry.

Sodium Nitroprusside Mitigates the Inhibitory Effect of Salt and Heavy Metal Stress on Lupine Yield and Downregulates Antioxidant Enzyme Activities

This study was conducted to investigate the effects of sodium nitroprusside (SNP) on antioxidant enzyme activities in <em>Lupinus </em><em>albus </em>subsp. <em>termis </em>(Forssk.) Ponert plants subjected to salt and heavy metal stress. Foliar spray of SNP (0.4 and 0.6 mM) was used as a nitric oxide (NO) donor to treat lupine plants grown under different levels of salinity (0, 75, and 150 mM NaCl) and nickel (Ni) stress (100 and 150 mM Ni sulfate). Growth parameters and yield as well as total phenols, flavonoids, and antioxidant enzyme activities (including those of superoxide dismutase, peroxidase, ascorbate peroxidase, catalase, and glutathione transferase) in NO-treated and untreated plants grown under normal or salt/heavy metal stress conditions were determined. We found that exogenously applied SNP effectively mitigated the inhibitory effects of salinity and Ni stresses on all measured growth parameters and yield components of lupine plants. In addition, NO downregulated antioxidant enzyme activities, which proved to be a good indicator reflecting changes in the oxidative status of lupine plants in response to SNP, salt, and Ni sulfate treatments.

Effect of Tryptophan and Ascorbic Acid on Yield and Some Chemical Constituents of Lupine ( Lupines termis L.) Plants

A field experiment was carried out during seasons 2017/2018 and 2018/2019 seasons to study the effects of spraying Tryptophan and Ascorbic acid on yield components and chemical composition of plants . using two cultivars Giza-1 and Giza-2 of lupine plants. Foliar spray of Tryptophan at rate (Trp. : 25 and 50 mg /L) Ascorbic acid (A A: 100 and 200 mg /L)either alone, or their combination and control. The effect of the previous treatments on some vegetative growth criteria namely{ plant height (cm), pod length (cm), number of branches/ plant, weight of 100 seeds, and seed yield / plant(g) and seed yield / fed(ton) } wear investigated as well as chemical composition such as, total nitrogen, crude protein (CP),total soluble sugars (TSS), crude lipids (CL), total alkaloids (TAs), and total phenolic compounds (TPCs). Results indicated that foliar application Tryptophan and Ascorbic acid significantly improve yield and chemical composition. Trp. was more effective than A. A. in raising lupine yield, significantly increased yield of lupine plants, plant height (cm), pod length (cm), number of branches/ plant, weight of 100 seeds and seed yield/ plant(g) and seed yield / fed(ton). Total nitrogen, crude protein (CP),total soluble sugars (TSS), crude lipids (CL), total alkaloid (TAs), and total phenolic compounds (TPCs). in seeds lupine were significantly enhancement by mounting Trp. from 25to 50 mg /L and/or A.A. concentrations up to 100 and 200 mg/L.

High-quality genome sequence of white lupin provides insight into soil exploration and seed quality

White lupin (Lupinus albus L.) is an annual crop cultivated for its protein-rich seeds. It is adapted to poor soils due to the production of cluster roots, which are made of dozens of determinate lateral roots that drastically improve soil exploration and nutrient acquisition (mostly phosphate). Using long-read sequencing technologies, we provide a high-quality genome sequence of a cultivated accession of white lupin (2n = 50, 451 Mb), as well as de novo assemblies of a landrace and a wild relative. We describe a modern accession displaying increased soil exploration capacity through early establishment of lateral and cluster roots. We also show how seed quality may have been impacted by domestication in term of protein profiles and alkaloid content. The availability of a high-quality genome assembly together with companion genomic and transcriptomic resources will enable the development of modern breeding strategies to increase and stabilize white lupin yield.

Irrigation-Induced Changes in Chemical Composition and Quality of Seeds of Yellow Lupine (Lupinus luteus L.).

The quality and amount of yellow lupine yield depend on water availability. Water scarcity negatively affects germination, flowering, and pod formation, and thus introduction of an artificial irrigation system is needed. The aim of this study was to evaluate the influence of irrigation on the quality of yellow lupine seeds. Raining was applied with a semi-solid device with sprinklers during periods of greatest water demand. It was shown that watered plants produced seeds of lesser quality, having smaller size and weight. To find out why seeds of irrigated plants were of poor quality, interdisciplinary research at the cellular level was carried out. DNA cytophotometry evidenced the presence of nuclei with lower polyploidy in the apical zone of mature seeds. This may lead to formation of smaller cells and reduce depositing of storage materials. The electrophoretic and Fourier transform infrared spectroscopic analyses revealed differences in protein and cuticular wax profiles, while scanning electron microscopy and energy dispersive spectroscopy revealed, among various chemical elements, decreased calcium content in one of seed zones (near plumule). Seeds from irrigated plants showed slightly higher germination dynamics but growth rate of seedlings was slightly lower. The studies showed that irrigation of lupine affected seed features and their chemical composition, an ability to germination and seedlings growth.

Mineral Status and Lupine Yield Responses to Ascorbic Acid Spraying and Irrigation by Diluted Sea Water

A pot experiment was conducted in the greenhouse of the National Research Centre at Dokki, Cairo Egypt during 2010 -2011 winter seasons to evaluate the effect of different salt stress degrees on the growth and yield characters. The salinity treatments were: Irrigation by three concentrations of diluted seawater (2000, 4000 and 6000 ppm) more than the control treatment (irrigated by tap water 250 ppm) and spraying ascorbic acid (AsA) with two concentrations (100, and 200 ppm). Salinity depressed the pods, straw, straw+ pods and seeds weight relative to the control plants but the depression of these traits showed its maximum values when plants subjected to the higher level of salinity (6000 ppm) markedly more than that with the other two levels of salinity. Slight differences in the mentioned characters of plants irrigated by solution contained 2000 or 4000 ppm. Gradual depressions in pods/straw, seeds/pods and seeds/straw ratios were detected with the increase in salt concentration in water of irrigation. Ascorbic acid application led to increase the pod, straw, total and seeds yields. The high increment in pods weight and seeds to straw ratio wereshown by using 100 ppm ascorbic acid but the increment in straw, totalseeds weight and seeds/pods and pods/straw ratios.Furthermore, the absorption rate of N, K, P, Ca, and Mg ions from the growth medium significantly inhibited as a result of treatment with diluted sea water. Meanwhile, significant increases in the uptake of these ions were obtained in response to ascorbic acid application.

ДЕЙСТВИЕ ЭКЗОГЕННЫХ РЕГУЛЯТОРОВ РОСТА НА ПОКАЗАТЕЛИ СТРУКТУРЫ УРОЖАЯ ЗЕРНА ЛЮПИНА БЕЛОГО И ЕГО КАЧЕСТВО

Effect of exogenous growth regulators on structure indices of grain yield and its quality of white lupin varieties Dega and Alyi parus are presented. Comparative analysis of action of chemicals Circon, Epin-extra, Gibberellin, Zavyaz on implementation of pod forming potential, plant productivity, number of pods, seeds per a plant and 1000 seed weight is given. The tested varieties differed in response degree to action of the chemicals. It’s established that the tested chemicals increased the yield of var. Dega by 6.0–7.2% (average during research years). The average increasing of the yield of var. Alyi parus made 20.6–22.0%. In addition it was noticed that the tested chemicals increased the seed size of main stem. Crude protein content in seeds of the var. Dega was 34.7–37.2%; of the var. Alyi parus it was 36.9–37.8%. After the treatment with these chemicals the tendency to increasing of this parameter has been no-ticed. Growth regulators have positive action on elements of white lupin yield structure. The plant productivity increasing made 5.0–10.0% after treatment of growth regulators, after double treatment it made 17.0–28.0%. Seed number growth took place also. In case of double treatment with Epin-extra this index of var. Alyi parus was the highest and made 17.3% compared to the standard and to the treatment with Zavyaz — 22.8%.

The sources of nitrogen for yellow lupine and spring triticale in their intercropping

The aim of the study was to evaluate the amount of nitrogen taken up from air, mineral fertilizers and soil by yellow lupine (Lupinus luteus L.) and spring triticale (Triticosecale Wittm. ex A. Camus) in their intercropping cultivation. The factor examined in the experiment was percentage of yellow lupine seeds and spring triticale grain in sown mixtures: 100/0, 75/25, 50/50, 25/75 and 0/100, respectively. Yellow lupine yield was reduced by spring triticale when intercropped. In the yield of both plants the percentage share of spring triticale grain was larger and that of yellow lupine seed was smaller than in the sown mixture. Land equivalent ratio informs that yield advantage under intercropping of lupine and triticale was minor. The total protein yield was the highest in lupine cultivation when sown pure, and decreased with increasing share of triticale in their intercropping. The mean percentage nitrogen share from N<sub>2</sub> fixation, fertilizer and soil reserves in yellow lupine mass was: 65.2, 8.8 and 26.0%, respectively, while in the mass of spring triticale it was 10.1, 23.5 and 68.8%, respectively.

Irrigation affects characteristics of narrow-leaved lupin (Lupinus angustifolius L.) seeds

Main conclusionWhile plant irrigation usually increases yield, irrigation also affects seed characteristics with respect to endoreplication level, chemical composition, number of carbonyl bands, and cuticular wax profiles.Seeds of sweet varieties of the narrow-leaved lupin have good nutritional properties; however, these plants are sensitive to water deficit. Irrigation improves lupin yield, but can affect seed characteristics. The purpose of the study was to evaluate irrigation influence on lupin seed features and their chemical composition. Morphological analyses showed worse quality of seeds from the irrigated plants, with regard to their size and weight. This was confirmed by cytophotometric analyses which revealed a lower DNA content in the nuclei of cells from the apical and basal regions of the irrigated seeds. The lower degree of polyploidy of the nuclei entails lower cell sizes and limited space for storage components. Fourier transform infrared spectroscopic analysis demonstrated that protein and cuticular wax profiles of the irrigated seeds were different from the control. The electrophoretic analyses indicated differences in protein profiles including changes in the proportion of lupin storage proteins. Among the various studied elements, only the nitrogen content decreased in the embryo axis of irrigated plants. Although germination dynamics of the irrigated seeds was higher, the seedlings’ development rate was slightly lower than in the control. The hydrogen peroxide level in root meristem cells was higher during germination in the control suggesting its regulatory role in seed metabolism/signaling. Our study indicated that irrigation of lupin plant affected seed features and composition.

Modelling phenological and agronomic adaptation options for narrow-leafed lupins in the southern grainbelt of Western Australia

Abstract Australian modern narrow-leafed lupin ( Lupinus angustifolius L.) cultivars tend to flower early and are vernalisation-unresponsive (VU). Cultivars have generally been selected for the warmer climates zones and sandy soils of the northern grain belt of Western Australia (NWA), where lupins are predominantly grown. In areas where climates are cooler and growing seasons are longer and wetter, such as the southern grain belt of Western Australia (SWA), it is probable that lupin would have a higher yield potential. Given that VU cultivars would have a longer vegetative phase (i.e. late flowering) we hypothesise that they may be more productive than those that are early flowering. Here we used a modelling approach to: 1) test the hypothesis that cool-climate SWA would have higher lupin yield than warm-climate NWA; 2) explore lupin phenological adaptation and yield potential in SWA over a range of proposed VU cultivars; and 3) further evaluate the combined effects of cultivar phenology, sowing time and seasonal type on lupin yields. Simulations from the Agricultural Production Systems Simulator (APSIM) showed that, on average, lupin yield in SWA was higher than that in NWA, with 23% greater yield for the early-flowering cultivar Mandelup. Proposed cultivars flowering 22 days (late-flowering) and 15 days (medium flowering) later than Mandelup would have their phenology better adapted in the high and medium rainfall zones of SWA, producing 16 and 7% more grain in the two rainfall zones, respectively. The proposed late-flowering cultivar sown before the end of April achieved higher yields for all seasons in the high rainfall zone and for above average and average rainfall seasons in the medium rainfall zone. In more water-limited situations early sowing was preferable with no obvious difference in yield among cultivars. Despite this, the early-flowering cultivar yielded more when sown in late April. The results indicate that lupin production would benefit from breeding VU varieties with a long vegetative phase for the SWA that should be sown in mid to late April.

White lupine yield under different sowing densities and row spacings

ABSTRACT The study aimed to evaluate different sowing densities and row spacings on grain yield and biomass in the white lupine crop, cv. ‘Comum’. The experimental design was a randomized block in a 4 x 4 factorial scheme, with four row spacings (20, 40, 60 and 80 cm) and four sowing densities in the row (10, 15, 20 and 25 plants m-1), with four replicates. The evaluated variables were: grain yield, hundred-grain weight, fresh and dry matter and the contents of nitrogen, phosphorus and potassium in the plant tissue. The highest grain yield was obtained with row spacing of 20 cm, regardless of plant density. The density of 25 plants m-1 and row spacing of 20 cm increased the fresh and dry matter yield. The adjustment of plant density and row spacing did not affect the content of nitrogen, phosphorus and potassium in plant tissue.

Оцінка впливу метеорологічних факторів на врожайність люпину вузьколистого в зоні Полісся України

Оцінка впливу метеорологічних факторів на врожайність люпину вузьколистого в зоні Полісся України

Genotype × environment interactions for phenological adaptation in narrow-leafed lupin: A simulation study with a parameter optimized model

An understanding of genotype×environment (G×E) interactions for phenological adaptation in crops can help identify traits that facilitate genetic improvement and cultivar selection. Such understanding is also necessary to identify environments that facilitate identification of cultivars with better environmental adaptation. Process-based crop simulation models including APSIM are valuable tools to investigate G×E interactions and traits conferring adaption to particular conditions. However cultivar parameters relating to crop phenology in crop model are difficult to determine directly through field experiments. Within this paper, we present a simulation study to explore the environmental and genotypic control of time to flowering and maturity in lupin and its grain yield, by using the APSIM model. In the model, lupin cultivar parameters were optimized by combining prior knowledge and PEST (Parameter ESTimation), a model-independent parameter optimiser. The parameterisation was for nine lupin cultivars with contrasting maturity (early vs late) and vernalization requirement (non-responsive vs responsive) across 13 sites×years across Australia. We showed that phenological differences among the cultivars were well explained by the optimized set of parameters, mainly reflected in vernalization response and photoperiodic sensitivity before flowering. Simulated flowering days and grain yield agreed well with the observations, with RMSEs (root mean squared error) of 4days and 0.34tha−1 for all cultivars together. The simulation results showed that lupin yield was significantly affected by temperature and water availability. An early-maturity cultivar would yield better than the late-maturity one at the warm and low rainfall region, while at high rainfall or long-season regions, cultivar types should be chosen tactically based on the climatic conditions for that season. Thus, lupin breeding in Australia should therefore focus on temperature regimes and rainfall gradients. These results indicate that the parameter-optimized APSIM model could be used to explore the adaptation of genotypes to a particular environment to provide guidance for a more efficient breeding program and develop optimal agronomic management practices.

Impact of climate changes on existing crop-livestock farming systems

The state of Western Australia is a major producer and exporter of crops and livestock. Mixed farming systems are typical agricultural enterprises in the Western Australian wheatbelt where climate drives the productivity and profitability of these farms and therefore the effects of likely climate change on their performance need to be understood. Here the effects of climate change projected at 2030 were evaluated compared to a baseline period (1980–1999) on mixed farming systems at paddock, enterprise and whole farm scales using the coupled APSIM and GRAZPLAN biophysical simulation models. The yield of different crops, livestock production and gross margins were assessed under current and projected climates using current farming technology and management practices. Representative mixed-farm systems were selected along a climate transect. Modelling analysis suggests that current production levels and gross margins of mixed farm systems in Western Australia will not be sustained in 2030 climate conditions except in areas of moderately high-rainfall. Whole farm gross margin declined at all site×potential climate scenarios between 1% and 22% except in moderately high rainfall where gross margin increased by up to 4% under a ‘hot and moderate change in rainfall’ climate. Projected crop yields declined for most of the crop×site×potential climate combinations, with greatest declines under a hot and dry climate (at driest margin of transect) in which wheat, barley, canola, and lupin yield declined up to 16%, 15%, 21%, and 27%, respectively. Increase in yield was predicted for wheat and barley at some of the site×potential climate s. Wheat yield increased only under moderately high rainfall region by 6% while barley increased by 1%. Simulated cropping gross margin was also shown to decline by between >1% and 23%, except for the moderately high-rainfall site where cropping gross margins were projected to increase by up to 3%. Changes in simulated livestock production were smaller and less variable than for crop production. The change in weight of livestock sold across sites×potential climate combinations ranged between −3% and +3%. Livestock gross margin varied between −11% and +6%. Modelling results indicated a greater fertilisation effect of the elevated CO2 on pasture production than on crop yield and biomass particularly in drier sites. But however, this could not offset negative impact of climate change under hot potential climates. The main negative environmental impacts from the projected climate change were declines in annual net primary production (ANPP), ground cover and water use efficiency mostly at drier sites. Whole farm N2O emission declined significantly for the majority of site×potential climate combinations, while smaller decreases in ruminant CH4 emission were predicted. In 2030, returns from livestock enterprises are predicted to be smaller, but less variable than from cropping and with increasing probability of success in drier regions. Reduced variability in financial return is important from the perspective of whole farm risk management. Shifts in enterprise mix in dryland mixed-farming systems towards increased livestock may be a helpful strategy in adapting to climate change and managing the associated financial risks.

Effect of neutralizing substances on zinc-contaminated soil on the yield and macroelement content in yellow lupine (Lupinus luteus L.)

Some trace elements, for example zinc, play both a positive and a negative role in plant life, which requires their content in soil. If soil is excessively contaminated with zinc, an attempt should be made to reduce the negative effect of this element on plants and other living organisms. For this reason, a study was undertaken to determine whether it was possible to alleviate the effect of soil zinc contamination (0, 150, 300 and 600 mg Zn kg-1 of soil) on the yield and macronutrient content of yellow lupine (Lupinus luteus L.). Compost (3%), bentonite (2%) and zeolite (2% relative to soil mass) were used to reduce the effect of soil zinc contamination. Macroand micronutrients were applied to the soil in the same amounts in all pots: 30 mg N, 30 mg P, 100 mg K, 50 mg Mg, 0.33 mg B, 5 mg Mn and 5 mg Mo per kg soil. Yellow lupine was harvested in the flowering phase and plant material samples were collected for laboratory tests. The induced soil zinc contamination reduced yellow lupine growth and development because a dose of 300 mg Zn kg-1 soil caused plant seedlings to wither. Compost and bentonite reduced the negative influence of soil zinc contamination on yellow lupine yield, especially on aerial parts. The most demonstrable effect of zinc on the macronutrient content of lupine plants was recorded for magnesium and calcium, whose content increased compared to the control in both the aerial parts and roots of yellow lupine. Among the neutralizing substances, the effect of zeolite on the phosphorus, magnesium and calcium content and bentonite on the sodium content in the plants was the most beneficial.

Występowanie chorób grzybowych na roślinach łubinu wąskolistnego (Lupinus angustifolius L.) w różnych rejonach Polski

Summary The aim of the study was to evaluate the degree of blue lupine (Lupinus angustifolius L.) infestation by pathogenic fungi, in particular regions of Poland, in dependence on cultivar and course of weather conditions. An experiment was conducted at the Stations of Research Centre for Cultivar Testing located in the following provinces: zachodniopomorskie, wielkopolskie, lubelskie, kujawsko-pomorskie, mazowieckie, podlaskie, podkarpackie, warminsko-mazurskie and pomorskie. Sixteen cultivars of blue lupine with different resistance to pathogenic fungi were included in this study. It was found that the occurrence of fungal diseases on blue lupine plants varied in particular regions of Poland. Root rot (Fusarium oxysporum, Rhizoctonia solani and others) and white mould (Sclerotinia sclerotiorum) occurred at the highest severity while wilting of lupine (F. oxysporum) and particularly seed borne anthracnose (Colletotrichum ssp.) appeared at considerably lower intensity. It has been proved that there is a clear dependence between fungal disease development and course of weather conditions as well as between infestation of plants by pathogenic fungi and collected yield. Among analyzed pathogens Colletotrichum ssp. and Fusarium oxysporum had the greatest impact on the blue lupine yield.

Risks of Boron Toxicity in Canola and Lupin by Forms of Boron Application in Acid Sands of South-Western Australia

Boron (B) deficiency frequently occurs on soils that are low in organic carbon (C) (<1.0% organic C), pH (soil pHCa <5.0), and clay content (<5% clay). Acid sands with these soil properties are common in south-western Australia (SWA). Moreover, hot calcium chloride (CaCl2) extractable B levels are commonly marginal in the acid sands of SWA. This study examined the effects of soluble and slow release soil-applied B fertilizer and foliar B sprays on crops most likely to respond to B fertilizer on these soils, canola (oil-seed rape, Brassica napus L.) and lupin (Lupinus angustifolius L.).At 25 sites over three years, canola was grown with (0.34 kg ha-1) or without B applied as borax [sodium tetraborate decahydrate (Na2B4O7·10H2O) 11% B], and this was followed by nine experiments with B rates [0, 0.55, 1.1 kg ha−1, applied as borax or calcium borate (ulexite, NaCaB5O6(OH)6·5(H2O), 13% B] and foliar sprays (0.1% solution of solubor, 23% B) in 2000–2001. A further five sites of B rates and sources experiments were carried out with lupin in 2000–2001. Finally, foliar B sprays (5% B w/v as a phenolic complex) at flowering were tested on seven sites in farmers’ canola crops for seed yield increases. No seed yield increases to soil-applied B were found while foliar B application at flowering increased canola seed yield in only one season across seven locations. By contrast, borax fertilizer drilled with the seed at sowing decreased canola seed yield in nine of 34-farm sites, and decreased lupin yield in two of five trials. Toxicity from drilled boron fertilizer decreased yield could be explained by decreases in plant density (by 22–40%) to values lower than required for optimum seed yield. Seedling emergence was decreased by borax applied at sowing but less so by calcium borate. Foliar B spray application never reduced seed yield due to toxicity effects.Boron fertilizer drilled with the seed increased the B concentration in plant dry matter at early to mid-flowering. Boron application decreased the oil concentration of grain of canola at four sites. The oil yield of canola was significantly decreased at seven sites.Notwithstanding the marginal B levels on acid sands of the SWA region, care needs to be taken on use of borax fertilizer as toxicity was induced in canola and lupin; with 0.34 to 1 kg B ha−1(3-10 kg borax ha−1) at sowing depressing seed yield, mostly by decreasing plant density. Rather than making general recommendation for B fertilizer application based on 0.01M CaCl2 soil extractable B, soil and plant analysis should be used to diagnose B deficiency and B fertilizer use limited to calcium borate or foliar borax rather than soil-applied borax on low B sands.

Prediction of yellow lupin yield (Lupinus luteus L.) for northern Poland using weather-crop model

Abstract Prediction of yellow lupin yield (Lupinus luteus L.) for northern Poland using weather- -crop model. The paper presents an analysis of the impact of meteorological factors (solar radiation, maximum, minimum and mean temperature, precipitation) on the development and yield of yellow lupin Parys cultivar in the northern Poland in the years 1987-2008. Using multiple regression methods (linear and quadratic function) created regression equations that were estimated using the coefficients of determination (R2, R2 adj and R2 pred - using the Cross Validation procedure). Selected regression equation used to estimate the yield of yellow lupin, using generated - by means of model WGENK - daily values of global radiation, maximum and minimum temperature, precipitation, and climate change scenario GISS Model E for Central Europe. Examined dependencies weather-yield of lupine seeds (cultivar Parys) allowed the application of the chosen model to forecast yields from the time when the values are independent variables in the model by the end of the growing season. The comparison of distributions of actual and simulated yields shows that real yields are slightly (by 0.06 t·ha-1) higher than those generated for 2 × CO2 conditions.