Low Quality Factor Research Articles

Fabrication of Radial Array Transducers Using 1-3 Composite via a Bending and Superposition Technique.

Piezoelectric composite materials, combining the advantages of both piezoelectric materials and polymers, have been extensively used in ultrasonic transducers. However, the pitch size of radial array ultrasonic transducers normally exceeds one wavelength, which limits their performance. In order to minimize grating lobes of current radial transducers and then increase their imaging resolution, a 2.5 MHz 1-3 composite radial array transducer with 64 elements and 600 μm pitch was designed and fabricated by combining flexible circuit board and using a bending-and-superposition method. All the array elements were connected and actuated via the customized circuit board which is thin and soft. The kerf size is set to be 1/3 wavelength. PZT-5H/epoxy 1-3 composite was used as an active material because it exhibits an ultrahigh electromechanical coupling coefficient (kt = 0.74), a very low mechanical quality factor (Qm = 11), and relatively low acoustic impedance (Zc = 13.43 MRayls). The developed radial array transducer exhibited a center frequency of 2.72 MHz, an average -6 dB bandwidth of 36%, an insertion loss of 31.86 dB, and a crosstalk of -26.56 dB between the adjacent elements near the center frequency. These results indicate that the bending-and-superposition method is an effective way to fabricate radial array transducers by binding flexible circuit boards. Furthermore, the utilization of tailored flexible circuitry boards presents an effective approach for realizing reductions in crosstalk level (CTL).

Band edge modulation for high-performance LL-SAW resonators on LiNbO3/SiC by introducing an ultra-thin intermediate oxide layer

With the exploding demand of rapid information transmission, high-frequency acoustic filtering devices are becoming an immediate need. Longitudinal leaky surface acoustic wave (LL-SAW) devices with unique advantages can be a promising platform. In this paper, we introduce a 100 nm intermediate oxide layer into the X-cut lithium niobate on silicon carbide (LiNbO3/SiC) to improve the in-band performance of LL-SAW resonators. First, the dispersion curves of the structures are analyzed by finite element method. In this part, we successfully interpret the intrinsic low quality factor (Q) of LL-SAW on LiNbO3/SiC in general design, and predict the enhancement of Q by introducing an intermediate oxide layer without degradation on spurious response. Then, one port resonators considered in the simulation are fabricated and measured. As a result, enhancements in Bode Q among the whole passband are confirmed. Compared with devices state of art, resonators with leading performances are demonstrated. The fabricated resonators have peak-valley admittance ratio of 63.87 dB, Bode Q of ∼300 at fr and ∼530 at far, keff2of 15.66 % and phase velocity of 6187.3 m/s. Additionally, the resonant frequency of SH1 mode shifts to higher frequency. This work enables the design of next generation high frequency mobile communication filters.

Significance analysis of the attenuation coefficient of vibrations in a boron nitride–carbon nanotube under buckling and fracture: A molecular dynamics study

Boron nitride–carbon nanotubes (BN–CNTs), serving as nanomass sensors, exhibit fatigue characteristics, such as buckling or bond breakage, under impact from measured particles. However, the impact of such damage on the functionality of BN–CNTs remains unclear. Here, we use molecular dynamics simulations to investigate the performance of BN–CNTs mass sensors under impact by C60 particles, focusing on three critical states: buckling, bond breakage, and coexisting buckling and bond breakage. An analysis of the impact stress and mass responsivity shows that damaged beams have a lower mass detection capability than undamaged beams. The results of a paired t-test and an analysis of the decay coefficients and vibration frequencies of damaged nanobeams show that damaged nanobeams have a significantly lower quality factor than undamaged nanobeams. We use an energy equation to analyze the impact process of nanobeams for the first time, revealing that the change in the potential energy of the beam is a crucial influence factor of the beam critical state. This study provides insights into the damage to nanoscale mass sensors caused by impact.

Modeling Rayleigh wave in viscoelastic media with constant Q model using fractional time derivatives

The propagation of seismic waves within the near-surface weathering layers, characterized by their low-quality factors (Q), is often accompanied by strong attenuation and dispersion phenomena. Among these, the Rayleigh wave, with its sensitivity to dispersion, has proven to be a powerful tool for near-surface exploration. We propose a novel approach for simulating Rayleigh wave propagation in such low-Q media. Our method uses the time-domain fractional wave equation with memory effect, based on Kjartansson's constant-Q (CQ) model, for accurate characterization of the propagation process. To solve numerically the wave equation with the fractional derivatives, we employ a finite-difference method combined with the auxiliary differential equation-perfectly matched layer (ADE-PML) and the acoustic-elastic boundary approach (AEA). The algorithm's high computational accuracy is verified through comparison with the conventional integer-order wave equation based on the nearly constant-Q (NCQ) models in strong attenuation media. The research in this paper deepens our understanding of the propagation characteristics of Rayleigh waves in strongly weathering layers. This new method strongly supports those seismic imaging and inversion methods depending on seismic modeling, including the reverse time migration and the full waveform inversion of the internal structure of low-Q media.

Enhancing search pipelines for short gravitational-wave transients with Gaussian mixture modeling

We present an enhanced method for the application of Gaussian mixture modeling (GMM) to the coherent WaveBurst (cWB) algorithm in the search for short-duration gravitational wave (GW) transients. The supervised machine learning method of GMM allows for the multidimensional distributions of noise and signal to be modeled over a set of representative attributes, which aids in the classification of GW signals against noise transients (glitches) in the data. We demonstrate that updating the approach to model construction eliminates bias previously seen in the GMM analysis, increasing the robustness and sensitivity of the analysis over a wider range of burst source populations. The enhanced methodology is applied to the generic burst all-sky short search in the LIGO-Virgo full third observing run (O3), marking the first application of GMM to the 3 detector Livingston-Hanford-Virgo network. For both 2- and 3- detector networks, we observe comparable sensitivities to an array of generic signal morphologies, with significant sensitivity improvements to waveforms in the low quality factor parameter space at false alarm rates of 1 per 100 years. This proves that GMM can effectively mitigate blip glitches, which are one of the most problematic sources of noise for unmodeled GW searches. The cWB-GMM search recovers similar numbers of compact binary coalescence (CBC) events as other cWB postproduction methods, and concludes on no new gravitational wave detection after known CBC events are removed. Published by the American Physical Society 2024

Microfluidic QCM enables ultrahigh Q-factor: a new paradigm for in-liquid gravimetric sensing

Acoustic gravimetric biosensors attract attention due to their simplicity, robustness, and low cost. However, a prevailing challenge in these sensors is dissipation which manifests in a low quality factor (Q-factor), which limits their sensitivity and accuracy. To mitigate dissipation of acoustic sensors in liquid environments we introduce an innovative approach in which we combine microfluidic channels with gravimetric sensors. To implement this novel paradigm we chose the quartz crystal microbalance (QCM) as our model system, owing to its wide applicability in biosensing and the relevance of its operating principles to other types of acoustic sensors. We postulate that the crucial determinant for enhancing performance lies in the ratio between the width of the microfluidic channels and the wavelength of the pressure wave generated by the oscillating channel side walls driven by the QCM. Our hypothesis is supported by finite element analysis (FEA) and dimensional studies, which revealed two key factors that affect device performance: (1) the ratio of the channel width to the pressure wavelength (W/λp\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$W/{\\lambda }_{{\\rm {p}}}$$\\end{document}) and (2) the ratio of the channel height to the shear evanescent wavelength (H/λs\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$H/{\\lambda }_{{\\rm {s}}}$$\\end{document}). To validate our hypothesis, we fabricated a microfluidic QCM (µ-QCM) and demonstrated a remarkable 10-fold improvement in its dissipation when compared to conventional QCM. The novel microfluidic approach offers several additional advantages, such as direct data interpretation, reduced volume requirement for sample liquids, and simplified temperature control, augmenting the sensor’s overall performance. By fostering increased sensitivity, accuracy, and ease of operation, our novel paradigm unlocks new possibilities for advancing gravimetric technologies, potentially for biosensing applications.

Sintering behavior, zinc volatilization, microstructure and microwave dielectric properties of ZnxSiO2+x ceramics

In this paper, the evolution of the microstructure for the zinc silicate ceramics with different Zn/Si ratios was revealed, and the factors influencing their dielectric properties were discussed. Our results demonstrate that Zn volatilization plays an important role on the defect structure of the samples. Low relative density, high conductivity loss caused by volatilization, and the presence of ZnO phase collectively result in low quality factor (Qf) of Zn2.0SiO4.0. By using the powder embedded sintering method, the loss could be reduced owing to the suppression of volatilization. As the Zn/Si ratio decreases, the ZnO disappears, while the Si-rich phase emerges and increases. The formation of a liquid phase results in a dense microstructure of the non-stoichiometric samples. Moreover, these samples exhibit a minor degree of Zn loss, probably because the presence of liquid phase constraints the volatilization during sintering. The samples with x = 1.8 display desirable properties, including a relative dielectric constant (εr) of 6.5, a Qf of 100,800 GHz, and a temperature coefficient of resonant frequency (τf) of −21.3 ppm/°C, due to their high degree of densification, slight zinc loss, and the elimination of the ZnO phase.

Polarization-controlled third harmonic generation by quasi-bound states in the continuum in silicon nanopillar metasurfaces

All-dielectric metasurfaces have received widespread attention due to their low intrinsic loss compared to the metallic counterparts. However, relatively high radiation loss and low quality (Q) factor of the dielectric nanostructures may significantly degrade their nonlinear optical efficiency. Here, we demonstrate that silicon-nanopillar-based metasurfaces supporting quasi bound states in the continuum (BICs) can greatly enhance the efficiency of third harmonic generation (THG). We show that symmetry-protected BICs form at the Γ-point of doubly degenerate band or nondegenerate band can be selectively transformed into quasi BIC through symmetry breaking of our silicon metasurfaces. Benefiting from the high Q and resonance enhancement by the quasi BICs, the THG conversion efficiencies of the silicon metasurface reaches 4.3 × 10-4 with a peak pump intensity of 1.3 GW/cm2, which can be four orders higher than that of a silicon planar film with the same thickness. In addition, the THG intensity is polarization-dependent for the single quasi BIC while it is polarization-independent for the doublet quasi BIC. Our results provide a new strategy for the design of high-efficiency silicon-based optical nonlinear devices.

A Collaborative Self-supervised Domain Adaptation for Low-Quality Medical Image Enhancement.

Medical image analysis techniques have been employed in diagnosing and screening clinical diseases. However, both poor medical image quality and illumination style inconsistency increase uncertainty in clinical decision-making, potentially resulting in clinician misdiagnosis. The majority of current image enhancement methods primarily concentrate on enhancing medical image quality by leveraging high-quality reference images, which are challenging to collect in clinical applications. In this study, we address image quality enhancement within a fully self-supervised learning setting, wherein neither high-quality images nor paired images are required. To achieve this goal, we investigate the potential of self-supervised learning combined with domain adaptation to enhance the quality of medical images without the guidance of high-quality medical images. We design a Domain Adaptation Self-supervised Quality Enhancement framework, called DASQE. More specifically, we establish multiple domains at the patch level through a designed rule-based quality assessment scheme and style clustering. To achieve image quality enhancement and maintain style consistency, we formulate the image quality enhancement as a collaborative self-supervised domain adaptation task for disentangling the low-quality factors, medical image content, and illumination style characteristics by exploring intrinsic supervision in the low-quality medical images. Finally, we perform extensive experiments on six benchmark datasets of medical images, and the experimental results demonstrate that DASQE attains state-of-the-art performance. Furthermore, we explore the impact of the proposed method on various clinical tasks, such as retinal fundus vessel/lesion segmentation, nerve fiber segmentation, polyp segmentation, skin lesion segmentation, and disease classification. The results demonstrate that DASQE is advantageous for diverse downstream image analysis tasks.

Association of lifestyle and occupational exposure factors with human semen quality: a cross-sectional study of 1060 participants

The incidence of male infertility (MI) is rising annually. However, the lifestyle and occupational exposure factors contributing to MI remain incompletely understood. This study explored the effects of self-reported lifestyle and occupational exposure factors on semen quality. Among 1060 subjects invited to participate, 826 were eligible. The participants’ general characteristics, lifestyle, and occupational exposure factors were collected immediately before or after semen evaluation through an online questionnaire. Initially, univariate analysis was used to investigate the relationship between the abovementioned factors and semen quality. The results indicated significant associations between low semen quality and various factors, including age, BMI, infertility type and duration, abstinence time, semen and sperm parameters, smoking, alcohol consumption, irregular sleep habits, and frequent exposure to high temperatures and chemicals at work (p < 0.05). Then, multivariate analysis was conducted to identify factors independently associated with low semen quality. Adjustment for relevant confounders was achieved by including factors with a p-value < 0.25 from univariate analyses as covariates in the binomial and ordered logistic regression models. The results suggested that alcohol consumption was a positive factor for sperm concentration (odds ratio [OR] = 0.60; 95% confidence interval [CI] = 0.36–0.99; p = 0.045). The groups with a BMI ≥ 24 and <28 kg/m2 showed a significant decrease in sperm progressive motility when compared to the reference group (BMI < 24 kg/m2) (OR = 0.63; 95% CI = 0.46–0.87, p = 0.005). In addition, the groups that drank green tea <1 time/week (OR = 1.52, 95% CI = 1.05–2.2) and 1–4 times/week (OR = 1.61, 95% CI = 1.02–2.54) exhibited significantly increased sperm DFI values compared with the group that drank green tea 5–7 times/week. In conclusion, these findings underscore the importance of maintaining a normal weight and regularly consuming green tea for men.

Design and Development of Dual Band Millimeter Wave Substrate Integrated Waveguide Antenna Array

Abstract New communication paradigms have emerged to make better use of the available wireless spectrum due to its scarcity. Millimeter wave high-frequency spectrum could offer a viable solution to the problem of spectrum scarcity. Millimeter wave devices and antennas are becoming increasingly popular and are used in a wide variety of applications and planned Fifth Generation (5G) wireless communication networks. In this work, we develop a Substrate Integrated Waveguide (SIW) based antenna array and millimeter-wave feeding network with the aim of achieving optimal performance. A microstrip array antenna is developed for use at millimeter wave frequencies of 28 GHz and 38 GHz. Next, an SIW array antenna will be created. For high-frequency uses, SIW technology excels due to its low loss, easy integration and high quality factor. The two unequal longitudinal slots in a slotted SIW antenna cause the structure to resonate at 28 GHz and 38 GHz. The SIW structure is fabricated by making two parallel rows of metallic vias, carefully determined through sizes to ensure minimal internal losses. A microstrip line that transitions into a SIW feeds into the proposed layout. In this paper, the authors investigate the design and construction of an integrated waveguide antenna array for use at dual millimeter-wave frequencies.

Mode coupling with Fabry–Perot modes in photonic crystal slabs

Abstract Fabry–Perot (FP) modes are a class of fundamental resonances in photonic crystal (PhC) slabs. Owing to their low quality factors, FP modes are frequently considered as background fields with their resonance nature being neglected. Nevertheless, FP modes can play important roles in some phenomena, as exemplified by their coupling with guided resonance (GR) modes to achieve bound states in the continuum (BIC). Here, we further demonstrate the genuine resonance mode capability of FP modes PhC slabs. Firstly, we utilize temporal coupled-mode theory to obtain the transmittance of a PhC slab based on the FP modes. Secondly, we construct exceptional points (EPs) in both momentum and parameter spaces through the coupling of FP and GR modes. Furthermore, we identify a Fermi arc connecting two EPs and discuss the far-field polarization topology. This work elucidates that the widespread FPs in PhC slabs can serve as genuine resonant modes, facilitating the realization of desired functionalities through mode coupling.

Optimizing the quality factor of InP nanobeam cavities using atomic layer deposition

Photonic crystal nanobeam cavities are valued for their small mode volume, CMOS compatibility, and high coupling efficiency-crucial features for various low-power photonic applications and quantum information processing. However, despite their potential, nanobeam cavities often suffer from low quality factors due to fabrication imperfections that create surface states and optical absorption. In this work, we demonstrate InP nanobeam cavities with up to 140% higher quality factors by applying a coating of Al2O3 via atomic layer deposition to terminate dangling bonds and reduce surface absorption. Additionally, changing the deposition thickness allows precise tuning of the cavity mode wavelength without compromising the quality factor. This Al2O3 atomic layer deposition approach holds great promise for optimizing nanobeam cavities that are well-suited for integration with a wide range of photonic applications.

Exploring the filtration performance and usage cost of commercial fiber air filters for capturing moxa smoke aerosols

Traditional moxibustion treatments plays a role in preventing and treating COVID-19 while aggravating indoor air pollution. Therefore, commercial fiber air filters (CFAF) are widely used to improve indoor air quality to reduce the risk of people being exposed to moxa smoke aerosols (MSA). Considering that there were few reports on the performance of CFAF for capturing MSA, we explored in detail the effects of face velocity and MSA particle size on the filtration performance of CFAF to fill this gap. Then, we analyzed the deposition characteristics of MSA on fibers in combination with SEM images. In addition, the long-term stability, cleaning performance and MSA holding capacity of the CFAF were further characterized by tests of continuous operation, clean air delivery rate (CADR) and MSA loading. The results indicated that the CFAF had the potential to efficiently capture MSA in indoor air at an acceptable annual usage cost (AUC). Specifically, the pristine CFAF had high classification counting efficiency (CCE) (99.1 %-100 %), medium pressure drop (150.3 Pa), and low quality factor (0.04 Pa−1) at the face velocity of 0.3 m·s−1. Note that increasing face velocity not only decreased CCE and quality factor but also significantly increased pressure drop. Furthermore, the CFAF maintained excellent CCE (99.5 %-100 %) after 24-h of continuous operation at high concentrations of MSA (100 mg·m−3), while the pressure drop increased to 203.7 Pa. Obviously, the deposited MSA severely clogged the inter-fiber pores, which explained the fact of the rapid increase in the pressure drop of the CFAF. Of course, the high CADR value (66.6 m3·h−1) also demonstrated that the CFAF had the ability to efficiently remove MSA from confined place. Moreover, a total of 216.3 g MSA can be captured by the CFAF when the final pressure drop reached 300 Pa, which meant that further increasing the MSA holding capacity would be the focus of future research by filter media manufacturers. Finally, through the established mathematical model, we successfully predicted the service life (86 days) and the total AUC (276 $·year−1) of using the CFAF to capture MSA. This work is expected to provide a useful reference for routine maintenance and design optimization of existing CFAF.

Shaping the Infrared luminescence of Colloidal Nanocrystals Using a Dielectric Microcavity

AbstractAs they have gained maturity, colloidal nanocrystals (NCs) have also expand the spectral range over of which they could be used for photonic and optoelectronic applications. In particular, the infrared use of NCs has become of utmost interest to develop cost‐effective alternatives to current technologies. It is then critical not to let the material dictate the light–matter interaction, which is why the coupling of NCs to photonic cavities has been proposed. For infrared NCs, this approach has first been devoted to the control of absorption with in mind the increase of the signal magnitude for detectors. A Lot of efforts have been focused on the use of metallic metasurfaces. However, these generate significant optical losses and yield low quality factor. Here, this study rather focus on the coupling of infrared NCs to a dielectric mirror cavity. HgTe/CdS core‐shell NCs are used and integrated into a cavity made of aperiodic dielectric mirrors. The effect of the substrate is systematically study on spectral linewidth, carrier dynamic, and emission directivity. The cavity is shown to narrow the PL by a factor 10, while focusing the emission over a 12° angle. Monitoring the power dependence of the emission, this study shows that the cavity leads to 250 K increase in the effective electronic temperature.

Optimal waveguide structure for low-threshold InGaN/GaN-based photonic-crystal surface-emitting lasers

We analyzed the optimal waveguide structure of two types of InGaN-based photonic crystal surface-emitting lasers (PCSELs) to suppress the coupling with leaky modes via mode simulations. To minimize the threshold material gain (gth), we calculated the confinement factor and quality factor of PCSELs with varying waveguide layer thicknesses in the separate confinement heterostructure (SCH) layer. The optical mode intensity profile revealed the coupling between the fundamental mode of SCH and parasitic leaky modes in the cladding layer or substrate as the primary root cause of the low-quality factor and high threshold gain of PCSELs. The asymmetric nature of the SCH structure yielded the optimal waveguide structure to be dependent on the position of the air holes. With a proper waveguide thickness and air hole depth, the optimized threshold modal gain of PCSELs with the n-side air holes can be less than 30 cm−1.

Tailoring Single-Mode Random Lasing of Tin Halide Perovskites Integrated in a Vertical Cavity.

The development of random lasing (RL) with predictable and controlled properties is an important step to make these cheap optical sources stable and reliable. However, the design of tailored RL characteristics (emission energy, threshold, number of modes) is only obtained with complex photonic structures, while the simplest optical configurations able to tune the RL are still a challenge. This work demonstrates the tuning of the RL characteristics in spin-coated and inkjet-printed tin-based perovskites integrated into a vertical cavity with low quality factor. When the cavity mode is resonant with the photoluminescence (PL) peak energy, standard vertical lasing is observed. More importantly, single mode RL operation with the lowest threshold and a quality factor as high as 1000 (twenty times the quality factor of the resonator) is obtained if the cavity mode lies above the PL peak energy due to higher gain. These results can have important technological implications toward the development of low-cost RL sources without chaotic behavior.

Azimuthal polarized quasi-bound states in the continuum based on rotational symmetry breaking.

Bound states in the continuum (BICs) allow to obtain an ultrahigh-quality-factor optical cavity. Nevertheless, BICs must be extended in one or more directions, substantially increasing the device footprint. Although super-cavity mode quasi-BICs supported by single nanopillars have been demonstrated recently, their low-quality factor and localized electromagnetic field inside the dielectric nanopillar are insufficient for high-sensitivity refractive index sensing applications. We propose a ring structure rotated by a dielectric sectorial nanostructure, which can achieve a high quality factor by breaking the rotational symmetry of the ring structure with a footprint as small as 3 µm2. As a straightforward application, we demonstrate high performance local refractive index and nanoscale film thickness sensing based on rotational symmetry breaking induced BICs. These BICs reach quality factor and sensitivity of one order of magnitude better than those of conventional super-cavity mode BICs. The proposed method provides insights into the design of compact high quality factor photonic devices, opening up new possibilities for applications in refractive index and nanoscale film thickness sensing.

Fabrication of FeSiBCr/wollastonite amorphous soft magnetic powder cores with low loss and high-quality factor

In this paper, the best magnetic properties of FeSiBCr/wollastonite soft magnetic composites were explored by adjusting the content of wollastonite powder and annea- ling temperature. FeSiBCr/wollastonite soft magnetic composites with low loss and high quality factor were successfully prepared by adding micron-sized wollastonite po-wder into amorphous magnetic powder. Wollastonite was used as the insulating coating material of amorphous magnetic powder for the first time, which showed good performance in reducing the loss of magnetic powder. The loss change of FeSiBCr/wollastonite magnetic powder cores was studied by B-H analyzer and loss separation analysis model. The results show that the total loss (Pcv) of FeSiBCr/woll- astonite composite cores is lower than that of the pure FeSiBCr cores. With the incre- ase of wollastonite powder content and annealing temperature, the total loss of FeSiBCr/wollastonite composite powder cores shows a trend of first decreasing and then increasing. The composite powder cores containing 0.8 wt% wollastonite powder was heat treated at 678 K for 1 hour under the protection of nitrogen, and its magnetic properties were the best, with a permeability of 28.93 and a loss of 196.2 mW/cm3( f =1 MHz and Bm =20 mT). Wollastonite is a new coating material, which has a good effect of reducing loss. At the same time, this work also provides a new scheme for reducing the total loss of soft magnetic powder cores.

Room-temperature quantum optomechanics using an ultralow noise cavity

At room temperature, mechanical motion driven by the quantum backaction of light has been observed only in pioneering experiments in which an optical restoring force controls the oscillator stiffness1,2. For solid-state mechanical resonators in which oscillations are controlled by the material rigidity, the observation of these effects has been hindered by low mechanical quality factors, optical cavity frequency fluctuations3, thermal intermodulation noise4,5 and photothermal instabilities. Here we overcome these challenges with a phononic-engineered membrane-in-the-middle system. By using phononic-crystal-patterned cavity mirrors, we reduce the cavity frequency noise by more than 700-fold. In this ultralow noise cavity, we insert a membrane resonator with high thermal conductance and a quality factor (Q) of 180 million, engineered using recently developed soft-clamping techniques6,7. These advances enable the operation of the system within a factor of 2.5 of the Heisenberg limit for displacement sensing8, leading to the squeezing of the probe laser by 1.09(1) dB below the vacuum fluctuations. Moreover, the long thermal decoherence time of the membrane oscillator (30 vibrational periods) enables us to prepare conditional displaced thermal states of motion with an occupation of 0.97(2) phonons using a multimode Kalman filter. Our work extends the quantum control of solid-state macroscopic oscillators to room temperature.