Lowest Triplet State Energy Research Articles

The Interplay of Strongly and Weakly Exchange-Coupled Triplet Pairs in Intramolecular Singlet Fission.

Singlet fission (SF) and triplet-triplet annihilation upconversion (TTA-UC) nominally enable the interconversion of higher-energy singlet states with two lower-energy triplet states and vice versa, with both processes having envisaged application for enhanced solar power devices. The mechanism of SF/TTA-UC involves a complex array of different multiexcitonic triplet-pair states that are coupled by the exchange interaction to varying extents. In this work a family of bounded intramolecular SF materials, based upon the chromophore 1,6-diphenyl-1,3,5-hexatriene, were designed and synthesized. Their SF behavior was characterized using fluorescence lifetime, transient absorption, and magnetic field dependence studies. The capacity for the formation of weakly exchange-coupled triplet pairs, and subsequent spin-evolution, is shown to be strongly dependent upon the combined factors of oligomer size and geometry. By contextualizing these results with the wider SF literature, we present a general schematic model for SF/TTA-UC of greater completeness than portrayed elsewhere.

(Invited) Blue Organic Light-Emitting Diode Using Dynamic Exciton for Low Driving Voltage

Among the three primary colors, blue emission in organic light-emitting diodes (OLEDs) are highly important but very difficult to develop. OLEDs have already been commercialized; however, blue OLEDs have the problem of requiring a high applied voltage due to the high-energy of blue emission. Herein, an ultralow voltage turn-on at 1.47 V for blue emission with a peak wavelength at 462 nm (2.68 eV) is demonstrated in an OLED device. This OLED reaches 100 cd/m2, which is equivalent to the luminance of a typical commercial display, at 1.97 V. Blue emission from the OLED is achieved by the selective excitation of the low-energy triplet states at a low applied voltage by using the charge transfer (CT) state as a precursor and the triplet-triplet annihilation, which forms one emissive singlet from two triplet excitons. We found that the essential component for efficient blue emission is a smaller energy difference between the CT state and triplet exciton, accelerating the energy transfer between the two states and achieving the optimal performance by avoiding direct decay from the CT state to the ground state. Our study demonstrates that the developed OLED allows for a much longer operation lifetime than that from a typical blue phosphorescent OLED because the blue emission originates from a stable low-energy triplet exciton that avoids degrading the constituent materials.

Activated Singlet Fission Dictated by Anti-Kasha Property in a Rylene Imide Dye.

A key challenge in the search of new materials capable of singlet fission (SF) arises from the primary energy conservation criterion, i.e., the energy of the triplet exciton has to be half that of the singlet (E(S1) ≥ 2E(T1)), which excludes most photostable organic materials from consideration and confines the design strategy to materials with low energy triplet states. One potential way to overcome this energy requirement and improve the triplet energy is to enable a SF channel from higher energy ("hot") excitonic states (Sn) in a process called activated SF. Herein, we demonstrate that efficient activated SF is achieved in a rylene imide-based derivative acenaphth[l, 2-a]acenaphthylene diimide (AADI). This process is enabled by an increase in the energy gap to greater than 1.0 eV between the S3 and S1 states due to the incorporation of an antiaromatic pentalene unit, which leads to the emergence of anti-Kasha properties in the isolated molecule. Transient spectroscopy studies show that AADI undergoes ultrafast SF from higher singlet excited states in thin film, with excitation wavelength-dependent SF yields. The SF yield of ∼200% is observed upon higher energy excitation, and long-lived free triplets persist on the μs time scale suggesting that AADI can be used in SF-enhanced devices. Our results suggest that enlarging the Sn-S1 energy gap is an effective way to turn on the activated SF channel and shed light on the development of novel, stable SF materials with high triplet energies.

Development of (NO)Fe(N2S2) as a Metallodithiolate Spin Probe Ligand: A Case Study Approach.

ConspectusThe ubiquity of sulfur-metal connections in nature inspires the design of bi- and multimetallic systems in synthetic inorganic chemistry. Common motifs for biocatalysts developed in evolutionary biology include the placement of metals in close proximity with flexible sulfur bridges as well as the presence of π-acidic/delocalizing ligands. This Account will delve into the development of a (NO)Fe(N2S2) metallodithiolate ligand that harnesses these principles. The Fe(NO) unit is the centroid of a N2S2 donor field, which as a whole is capable of serving as a redox-active, bidentate S-donor ligand. Its paramagnetism as well as the ν(NO) vibrational monitor can be exploited in the development of new classes of heterobimetallic complexes. We offer four examples in which the unpaired electron on the {Fe(NO)}7 unit is spin-paired with adjacent paramagnets in proximal and distal positions.First, the exceptional stability of the (NO)Fe(N2S2)-Fe(NO)2 platform, which permits its isolation and structural characterization at three distinct redox levels, is linked to the charge delocalization occurring on both the Fe(NO) and the Fe(NO)2 supports. This accommodates the formation of a rare nonheme {Fe(NO)}8 triplet state, with a linear configuration. A subsequent FeNi complex, featuring redox-active ligands on both metals (NO on iron and dithiolene on nickel), displayed unexpected physical properties. Our research showed good reversibility in two redox processes, allowing isolation in reduced and oxidized forms. Various spectroscopic and crystallographic analyses confirmed these states, and Mössbauer data supported the redox change at the iron site upon reduction. Oxidation of the complex produced a dimeric dication, revealing an intriguing magnetic behavior. The monomer appears as a spin-coupled diradical between {Fe(NO)}7 and the nickel dithiolene monoradical, while dimerization couples the latter radical units via a Ni2S2 rhomb. Magnetic data (SQUID) on the dimer dication found a singlet ground state with a thermally accessible triplet state that is responsible for magnetism. A theoretical model built on an H4 chain explains this unexpected ferromagnetic low-energy triplet state arising from the antiferromagnetic coupling of a four-radical molecular conglomerate. For comparison, two (NO)Fe(N2S2) were connected through diamagnetic group 10 cations producing diradical trimetallic complexes. Antiferromagnetic coupling is observed between {Fe(NO)}7 units, with exchange coupling constants (J) of -3, -23, and -124 cm-1 for NiII, PdII, and PtII, respectively. This trend is explained by the enhanced covalency and polarizability of sulfur-dense metallodithiolate ligands. A central paramagnetic trans-Cr(NO)(MeCN) receiver unit core results in a cissoid structural topology, influenced by the stereoactivity of the lone pair(s) on the sulfur donors. This {Cr(NO)}5 radical bridge, unlike all previous cases, finds the coupling between the distal Fe(NO) radicals to be ferromagnetic (J = 24 cm-1).The stability and predictability of this S = 1/2 moiety and the steric/electronic properties of the bridging thiolate sulfurs suggest it to be a likely candidate for the development of novel molecular (magnetic) compounds and possibly materials. The role of synthetic inorganic chemistry in designing synthons that permit connections of the (NO)Fe(N2S2) metalloligand is highlighted as well as the properties of the heterobi- and polymetallic complexes derived therefrom.

Blue organic light-emitting diode with a turn-on voltage of 1.47 V

Among the three primary colors, blue emission in organic light-emitting diodes (OLEDs) are highly important but very difficult to develop. OLEDs have already been commercialized; however, blue OLEDs have the problem of requiring a high applied voltage due to the high-energy of blue emission. Herein, an ultralow voltage turn-on at 1.47 V for blue emission with a peak wavelength at 462 nm (2.68 eV) is demonstrated in an OLED device with a typical blue-fluorescent emitter that is widely utilized in a commercial display. This OLED reaches 100 cd/m2, which is equivalent to the luminance of a typical commercial display, at 1.97 V. Blue emission from the OLED is achieved by the selective excitation of the low-energy triplet states at a low applied voltage by using the charge transfer (CT) state as a precursor and triplet-triplet annihilation, which forms one emissive singlet from two triplet excitons.

Unraveling the Marked Differences of the Excited-State Properties of Arylgold(III) Complexes with C∧N∧C Tridentate Ligands.

Three structurally similar gold(III) complexes with C∧N∧C tridentate ligands, [1; C∧N∧C = 2,6-diphenylpyridine], [2; C∧N∧C = 2,6-diphenylpyrazine], and [3; C∧N∧C = 2,6-diphenyltriazine], have been investigated theoretically to rationalize the marked difference in emission behaviors. The geometrical and electronic structures, spectra properties, radiative and nonradiative decay processes, as well as reverse intersystem crossing and reverse internal conversion (RIC) processes were thoroughly analyzed using density functional theory (DFT) and time-dependent DFT calculations. The computed results indicate that there is a small energy difference between the lowest-energy triplet state (T1) and the second lowest-energy triplet state (T1') of complexes 2 and 3, suggesting that the excitons in the T1 state can reach the emissive higher-energy T1' through the RIC process. In addition, the non-emissive T1 states of gold(III) complexes in solution can be ascribed to the easily accessible metal-centered (3MC) state or possibly tunneling into high-energy vibrationally excited singlet states for nonradiative decay. The low efficiency of 3 is attributed to the deactivation pathway via the 3MC state. The present study elucidates the relationship between structure and property of gold(III) complexes featuring C∧N∧C ligands and providing a comprehensive understanding of the significant differences in their luminescence behaviors.

Excited State Dynamics of Dibenzothiophene Derivatives.

Polycyclic aromatic sulfur heterocycles are environmental pollutants formed from incomplete combustion processes and crude oil spills. Their excited state dynamics are not understood. Herein, femtosecond transient absorption is combined with steady-state spectroscopy and computational methods to elucidate the relaxation mechanisms of three dibenzothiophene derivatives. The low-energy singlet and triplet states all have ππ* character in the Franck-Condon region, and two minima were located in the S1 surface. Excitation at 320 nm populates their S1 state directly, which relaxes with lifetimes ranging from 4 to 13 ps. Most of the S1 population undergoes efficient intersystem crossing to the triplet state with lifetimes ranging from 820 ± 50 to 900 ± 30 ps. The compounds exhibit negligible nonradiative internal conversion, low fluorescence yields of 1.2 to 1.6%, and triplet yields of ca. 98%. Linear interpolation of internal coordinates reveals the chemical basis for relaxing the spin-forbidden intersystem crossing in these π-aromatic systems.

Singlet O2 from Ultraviolet Excitation of the Quinoline-O2 Complex.

We report results from experiments with the quinoline-O2 complex, which was photodissociated using light near 312 nm. Photodissociation resulted in formation of the lowest excited state of oxygen, O2 a 1Δg, which we detected using resonance enhanced multiphoton ionization and velocity map ion imaging. The O2+ ion image allowed for a determination of the center-of-mass translational energy distribution, P(ET), following complex dissociation. We also report results of electronic structure calculations for the quinoline singlet ground state and lowest energy triplet state. From the CCSD/aug-cc-pVDZ//(U)MP2/cc-pVDZ calculations, we determined the lowest energy triplet state to have ππ* electronic character and to be 2.69 eV above the ground state. We also used electronic structure calculations to determine the geometry and binding energy for several quinoline-O2 complexes. The calculations indicated that the most strongly bound complex has a well depth of about 0.11 eV and places the O2 moiety above and approximately parallel to the quinoline ring system. By comparing the experimental P(ET) with the energy for the singlet ground state and the lowest energy triplet state, we concluded that the quinoline product was formed in the lowest energy triplet state. Finally, we found the experimental P(ET) to be in agreement with a Prior translational energy distribution, which suggests a statistical dissociation for the complex.

Double Thionated Pyrimidine Nucleobases: Molecular Tools with Tunable Photoproperties.

Sulfur-substituted nucleobases are DNA and RNA base derivatives that exhibit extremely efficient photoinduced intersystem crossing (ISC) dynamics into the lowest-energy triplet state. The long-lived and reactive triplet states of sulfur-substituted nucleobases are crucial due to their wide range of potential applications in medicine, structural biology, and the development of organic light-emitting diodes (OLEDs) and other emerging technologies. However, a comprehensive understanding of non-negligible wavelength-dependent changes in the internal conversion (IC) and ISC events is still lacking. Here, we study the underlying mechanism using joint experimental gas-phase time-resolved photoelectron spectroscopy (TRPES) and theoretical quantum chemistry methods. We combine 2,4-dithiouracil (2,4-DTU) TRPES experimental data with computational analysis of the different photodecay processes, which are induced by increasing excitation energies along the entire linear absorption (LA) ultraviolet (UV) spectrum. Our results show how the double-thionated uracil (U), i.e., 2,4-DTU, appears as a versatile photoactivatable instrument. Multiple decay processes can be initiated with different ISC rates or triplet-state lifetimes that resemble the distinctive behavior of the singly substituted 2- or 4-thiouracil (2-TU or 4-TU). We obtained a clear partition of the LA spectrum based on the dominant photoinduced process. Our work clarifies the reasons behind the wavelength-dependent changes in the IC, ISC, and triplet-state lifetimes in doubly thionated U, becoming a biological system of utmost importance for wavelength-controlled applications. These mechanistic details and photoproperties are transferable to closely related molecular systems such as thionated thymines.

Crystal structure, stability, spectroscopy, electronic structure, and ultrafast excited-state dynamics of the elusive iron(II) phthalocyanine axially coordinated with DABCO ligands

The elusive PcFe(DABCO)2 (Pc = phthalocyaninato(2-) ligand; DABCO = 1,4-diazabicyclo[2.2.2]octane) complex was prepared and characterized by UV-Vis, MCD, 1H NMR, and Mössbauer spectroscopies. The X-ray crystal structure of this complex indicates the longest Fe-N(DABCO) bond distance among all known PcFeL2 complexes with nitrogen donors as the axial ligands. The target compound is only stable in the presence of large access of the axial ligand and rapidly converts into the (PcFe)2O [Formula: see text]-oxo dimer even at a modest temperature. The electronic structure of the PcFe(DABCO)2 complex was elucidated by DFT and TDDFT methods. The DFT calculations predicted a very small singlet-triplet gap in this compound. The femtosecond transient absorption spectroscopy is indicative of extremely fast ([Formula: see text]200 fs) deactivation of the first excited state in PcFe(DABCO)2 with a lack of formation of the long-lived low-energy triplet state.

High N‐H Photoacidity of a Nitrogen‐Rich Fused Ring Heteroaromatic Scaffold

AbstractIt is shown that 4‐methyl‐7‐(4‐nitrophenyl)‐triazolo[3,2‐c]triazole exhibits a high photoacidity, unprecedented in neutral molecules in which the proton is delivered by a NH bond, which promotes acetalization of aldehydes under irradiation by a near‐UV low power LED. Time dependent transient absorption spectroscopy shows a series of stimulated emission signals attributable to photo‐tautomerization and formation of the deprotonated species, followed by broad positive absorption band which does not decay within the investigated timescale, compatible with the formation of a long living species, possibly the anion in the lowest energy triplet state. Computational analyses qualitatively confirm the strong photoacidity of the molecule in all its tautomeric forms, allow to assign transient absorption signals, and show that the first singlet excited state exhibits high spin‐orbit couplings with excited triplet states which could promote a fast singlet‐triplet transition, thus leading to a long living species able to photocatalyze chemical reactions.

Bending Pyrenacenes to Fill Gaps in Singlet-Fission-Based Solar Cells

Singlet fission is envisaged to enhance the efficiency of single-junction solar cells beyond the current theoretical limit. Even though sensitizers that undergo singlet fission efficiently are known, characteristics like low-energy triplet state or insufficient stability restrict their use in silicon-based solar cells. Pyrenacenes have the potential to overcome these limitations, but singlet-fission processes in these materials is outcompeted by excimer formation. In this work, bent pyrenacenes with a reduced propensity to stack and thus form excimers are computationally evaluated as singlet-fission materials. The energies of the S1, T1 and T2 states were estimated in a series of bent pyrenacenes by means of time-dependent density functional theory calculations. Our results show the opposite trend observed for perylene diimides, namely, an increase in the energy of the T1 and S1 states upon bending. In addition, we show that the energy levels can be tuned on demand by manipulating the bend angle to match the energy gap of various semiconductors that can be used in single-junction solar cells, making pyrenacenes promising candidates for singlet fission.

π-Extended Ligands in Two-Coordinate Coinage Metal Complexes.

Two-coordinate carbene-MI-amide (cMa, MI = Cu, Ag, Au) complexes have emerged as highly efficient luminescent materials for use in a variety of photonic applications due to their extremely fast radiative rates through thermally activated delayed fluorescence (TADF) from an interligand charge transfer (ICT) process. A series of cMa derivatives was prepared to examine the variables that affect the radiative rate, with the goal of understanding the parameters that control the radiative TADF process in these materials. We find that blue-emissive complexes with high photoluminescence efficiencies (ΦPL > 0.95) and fast radiative rates (kr = 4 × 106 s-1) can be achieved by selectively extending the π-system of the carbene and amide ligands. Of note is the role played by the increased separation between the hole and electron in the ICT excited state. Analysis of temperature-dependent luminescence data and theoretical calculations indicate that the hole-electron separation exerts a primary effect on the energy gap between the lowest-energy singlet and triplet states (ΔEST) while keeping the radiative rate for the singlet state relatively unchanged. This interpretation provides guidelines for the design of new cMa derivatives with even faster radiative rates in addition to those with slower radiative rates and thus extended excited state lifetimes.

An Overlooked Charge‐Transfer Interaction in the Interfacial Triplet–Triplet Upconversion Process in Blue Organic Light‐Emitting Diodes

AbstractTwo low‐energy triplets can generate one singlet via triplet–triplet upconversion (TTU), and result in an exciton production yield exceeding 25% in conventional fluorescence‐based organic light‐emitting diodes (OLEDs). In most cases, since such low‐energy triplets induce no serious OLED degradation, TTU‐OLEDs are the only commercialized blue OLEDs so far. Herein, it is clarified that the charge‐transfer (CT) interaction at a hole‐transport/emitter‐layer interface is an overlooked pathway to enhance TTU yield significantly. First, a small energy offset at the interface enables the formation of a high‐energy CT exciton. Second, the lower energy triplet state originated from an anthracene moiety in the emitter layer collects the interfacial triplet CT. Third, due to the high‐density interfacial triplets formation, TTU at the interface contributes to the electroluminescence from the emitter layer or blue dopants even at low current density. This finding underlines the important role of the CT interface to exploit the full potential of TTU in pure‐blue OLEDs.

Cooperative redox and spin activity from three redox congeners of sulfur-bridged iron nitrosyl and nickel dithiolene complexes

The synthesis of sulfur-bridged Fe-Ni heterobimetallics was inspired by Nature's strategies to "trick" abundant first row transition metals into enabling 2-electron processes: redox-active ligands (including pendant iron-sulfur clusters) and proximal metals. Our design to have redox-active ligands on each metal, NO on iron and dithiolene on nickel, resulted in the observation of unexpectedly intricate physical properties. The metallodithiolate, (NO)Fe(N2S2), reacts with a labile ligand derivative of [NiII(S2C2Ph2)]0, NiDT, yielding the expected S-bridged neutral adduct, FeNi, containing a doublet {Fe(NO)}7. Good reversibility of two redox events of FeNi led to isolation of reduced and oxidized congeners. Characterization by various spectroscopies and single-crystal X-ray diffraction concluded that reduction of the FeNi parent yielded [FeNi]-, a rare example of a high-spin {Fe(NO)}8, described as linear FeII(NO-). Mössbauer data is diagnostic for the redox change at the {Fe(NO)}7/8 site. Oxidation of FeNi generated the 2[FeNi]+⇌[Fe2Ni2]2+ equilibrium in solution; crystallization yields only the [Fe2Ni2]2+ dimer, isolated as PF6- and BArF- salts. The monomer is a spin-coupled diradical between {Fe(NO)}7 and NiDT+, while dimerization couples the two NiDT+ via a Ni2S2 rhomb. Magnetic susceptibility studies on the dimer found a singlet ground state with a thermally accessible triplet excited state responsible for the magnetism at 300 K (χMT = 0.67 emu·K·mol-1, µeff = 2.31 µB), and detectable by parallel-mode EPR spectroscopy at 20 to 50 K. A theoretical model built on an H4 chain explains this unexpected low energy triplet state arising from a combination of anti- and ferromagnetic coupling of a four-radical molecular conglomerate.

Melatonin photoreactivity: phosphorescence formation and quenching processes

Studies of melatonin photoreactivity in water solutions: An effect of an external heavy atom I− on UV/Vis absorption, fluorescence and phosphorescence spectra is explored. The data allowed determination of relevant energetics for the system.The heavy atom effect (HAE) of I− on melatonin is clearly found to induce an intersystem crossing from the lowest energy singlet state to the lowest energy triplet state (T1) by a state mixing. Lifetime for the first excited triplet states of melatonin in association with I− and quenching rates for halomethanes (CH2X2, CHX3, CY4, X = Cl, Br, Y = Cl) are determined from Time-Correlated Single-Photon Counting decay curves for the phosphorescence. Dramatic alterations in quenching rate constants with quenchers as CH2X2 < CHX3 < CX4 and Cl < Br are attributed to energy transfer from an I−…Me*(T1) complex to low-lying electronic states of the halomethanes followed by dissociation to form R and X fragments. Relevance of the melatonin photoreactivity to photosensitizer properties in organic media is discussed.Graphical abstract

Interatomic Repulsion and the Pauli Principle

Atoms may repel or attract each other, but bound systems get virtually all of the attention in the classroom. To address the imbalance, instructors can explore the basis of repulsion in a few simple systems and highlight the important role played by the Pauli principle. A good example is the first triplet excited state of H2 wherein both electrons have the same spin. In light of the Hellmann–Feynman theorem, the net interaction is repulsive due to the low electron density that results in the region between the two nuclei. Analogous destabilization occurs in σ-bonding systems involving 3 electrons because two-thirds of the electrons have the same spin. Symmetrical systems like He2+ are exceptions and actually do form bonds because the minority spin is able to delocalize over both centers. In contrast, the ground state of the neutral He2 system entails 2 α and 2 β electrons and is strictly repulsive. Finally, the lowest energy triplet state of ethylene twists toward a D2d structure to avoid a destabilizing interaction akin to that identified in the triplet state of H2.

On the oscillating properties of a two-electron quantum dot in the presence of a magnetic field

We give a basic explanation for the oscillating properties of some physical quantities of a two-electron quantum dot in the presence of a static magnetic field. This behaviour was discussed in a previous work of ours (Maniero et al 2020 J. Phys. B: At. Mol. Opt. Phys. 53 185001) and was identified as a manifestation of the de Haas–van Alphen effect, originally observed in the framework of diamagnetism of metals in the 30s. We show that this behaviour is a consequence of different eigenstates of the system assuming, in a certain interval of the magnetic field, the condition of the lowest energy singlet and triplet states.

Coordination-Driven Self-Assembly of Cyclometalated Iridium Squares Using Linear Aromatic Diisocyanides.

Here, we demonstrate facile [4 + 4] coordination-driven self-assembly of cyclometalated iridium(III) using linear aryldiisocyanide bridging ligands (BLs). A family of nine new [Ir(C^N)2(μ-BL)]44+ coordination cages is described, where C^N is the cyclometalating ligand-2-phenylpyridine (ppy), 2-phenylbenzothiazole (bt), or 1-phenylisoquinoline (piq)-and BL is the diisocyanide BL, with varying spacer lengths between the isocyanide binding sites. These supramolecular coordination compounds are prepared via a one-pot synthesis, with isolated yields of 40-83%. 1H NMR spectroscopy confirms the selective isolation of a single product, which is affirmed to be the M4L4 square by high-resolution mass spectrometry. Detailed photophysical studies were carried out to reveal the nature of the luminescent triplet states in these complexes. In most cases, phosphorescence arises from the [Ir(C^N)2]+ nodes, with the emission color determined by the cyclometalating ligand. However, in two cases, the lowest-energy triplet state resides on the aromatic core of the BL, and weak phosphorescence from that state is observed. This work shows that aromatic diisocyanide ligands enable coordination-driven assembly of inert iridium(III) nodes under mild conditions, producing supramolecular coordination complexes with desirable photophysical properties.

Time-Dependent Phosphorescence Colors from Carbon Dots for Advanced Dynamic Information Encryption.

The development of phosphorescent materials with time-dependent phosphorescence colors (TDPCs) is of considerable interest for application in advanced dynamic information encryption. In this study, TDPC is realized in carbon dots (CDs) synthesized by the one-pot hydrothermal treatment of levofloxacin. CD ink printed on paper (CD@paper) exhibits a change in phosphorescence color from orange to green, 1 s after irradiation with 395 nm light. However, when irradiated with wavelengths shorter or longer than 395 nm, the CD@paper exhibits only green or red phosphorescence, respectively. The red and green phosphorescence originates from the low-energy surface oxide triplet state and high-energy N-related triplet state, respectively. When irradiated with a suitable light energy (around 395 nm wavelength), the two phosphorescent centers can be simultaneously activated, emitting red and green phosphorescence with different decay rates. The red and green phosphorescence merge into an orange phosphorescence initially, exhibiting the TDPC phenomenon. Based on the unusual phosphorescent properties of the CDs, a kind of multilevel, dynamic phosphorescence colored 3D code is designed for advanced dynamic information encryption.