Low-cost Production Research Articles

Synthesis of Porous Carbons from Candlenut Shells Using Various Types of Activators for Environmentally Friendly Supercapacitors

Porous carbon is one of the promising electrode materials for supercapacitors due to its unique and engineerable microstructural properties. The study of the synthesis of porous carbon from waste biomass is very important due to the abundance of natural resources, low cost production and contribute to solving environmental problems. In this study, porous carbons derived from candlnut shell with various type of activator was studied the chemical structural, morphological and electrochemical properties then evaluated as electrodes for supercapacitor. We have been successfully synthesized of porous carbon from candlenut shells using three steps of the process, i.e.: carboni-zation, activation and calcination. Carbonization was carried out at 700°C in a furnace using a closed crucible to minimize the oxygen. The chemical activation conducted using three types of activators, i.e. ZnCl2, H3PO4 and KOH then calcination process by heated at 800°C for 1 h under Ar flow. The results of the Fourier-transform infrared (FTIR) analysis show that the carbonization process increases the content of aromatic C=C functional groups and reduce the OH, C-H, C-O and C=O functional groups. The carbonization process has also increased the electrical conductivity of the sample around 0.8525 S/m. The results of Scanning Electron Microscope (SEM) images can be observed that the activation process of carbon has formed which was indicated by the appearance of many pores on the surface area of carbon. N2 adsorption/desorption isotherms (Brunauer–Emmett–Teller (BET)) characterization was indicated that the porous carbon is dominated by mesoporous with a pore size around 2-50 nm. BET characterization also can be determined the surface area of porous carbon around 477 m2/g for ZnCl2, 636 m2/g for H3PO4, and 681 m2/g for KOH. This synthesized materials are further employed in a symmetric supercapacitor using simple glass cell. The best performance of supercapacitor achieved by KOH porous carbons with 16.30 F/g of specific capacitance, 2.26 Wh/kg of energy density and 1038 W/kg of power density.

Characteristics of the Gut Microbiota Composition of the Arctic Zone Residents in the Far Eastern Region

Background. In many studies over the past decade, scientists have made a connection between the composition of gut microbiota and human health. A number of publications have shown that gut bacteria are involved in many metabolic and physiological processes of the organism. The composition of the gut microbiome is unique for each person and is formed under the influence of various factors associated with both the individual characteristics of the body and the characteristics of the environment. Different regional characteristics make it necessary for the body to adapt to certain conditions, including temperature fluctuations. Living in areas with low temperatures, such as the Arctic zone, dictates the need for increased energy consumption, which affects the composition of the gut microbiome. Methods. In our study, an extensive questionnaire was conducted among the participants, where many questions were included about the dietary preferences of the study participants, which allowed them us to further divide them into groups according to their diets. Stool samples were collected from participants from 3 groups: Arctic native, Arctic newcomer and the control group. The next step was the isolation of bacterial DNA and sequencing the 16S rRNA gene. The analysis of the results of the diversity of the intestinal microbiota was carried out both with and without taking into account the dietary preferences of the participants. Results. As a result of comparing the intestinal microbiota obtained from residents of the Arctic zone with the gut microbiota of residents of other regions with a milder climate, significant differences are found. These differences may be related to limited food resources and a reduction in the variety of food products characteristic of this Arctic region. t was also found that representatives of the bacterial families Christensenellaceae and Muribaculaceae dominated the control group, both with traditional nutrition and with a dairy-free diet in comparison with the Arctic groups. The control group was dominated by representatives of the Prevotellaceae, Enterobacteriaceae and Comamonadaceae families compared to the Arctic group (with a traditional diet). The results also show that the number of representatives of the families Desulfovibrionaceae (with traditional diet) and Enterobacteriaceae (with milk-free diet) is growing in the Arctic group. Conclusions. In the course of this work, bacterial families characteristic of people living in the Arc-tic zone of the Far Eastern region of the Russian Federation were identified. Poor diet, difficult climatic conditions, and problems with logistics and medical care can have a strong impact on the health of this population. The main type of diet for the inhabitants of the Arctic is the traditional type of diet. They consume a large number of low-cost products, obtainget animal protein from poultry and canned food, and also eat a small number of fresh vegetables and fruits. Such a diet is due to the social status of the study participants and the climatic and geographical features of the region (difficulties in agriculture). With such a diet, we observe a decrease in representatives of the Christensenellaceae, Muribaculaceae, Eubacteriaceae, and Prevotellaceae families and an increase in representatives of the Enterobacteriaceae and Desulfovibrionaceae families among Arctic residents. This imbalance in the futuremay cause, this population may to develop various diseases in the future, including chronic diseases such as obesity, intestinal dysbiosis, inflammatory bowel diseases, and type 2 diabetes.

The Environmental and Social Impacts of Fast Fashion on Youth: A Statistical Analysis

This abstract presents a concise overview of the research conducted on the impact It has gained significant popularity among young consumers due to its affordability and accessibility. However, this abstract highlights the adverse effects of fast fashion on youth in various aspects, including environmental sustainability, labor rights, and psychological well-being. The first section explores the environmental consequences of fast fashion. It discusses the excessive consumption and disposal of clothing, leading to significant resource depletion, pollution, and landfill waste. The detrimental effects of textile production, such as water pollution and greenhouse gas emissions, are also examined. Moreover, the concept of planned obsolescence and its contribution to a throwaway culture are discussed, emphasizing the need for sustainable alternatives. Fast fashion is being recognized as a prominent force in today's swiftly expanding fashion business, revolutionizing the way young people consume and engage with apparel. manufacturing and consumption of stylish, inexpensive clothing that are frequently inspired by runway trends and popular culture. While fast fashion is currently rising in popularity among young people throughout the world, its influence reaches far beyond passing fashion fads. implications of rapid fashion on teenage behavior, environment, and general well-being. Fast fashion is linked to unsustainable manufacturing and consumption practices, which cause severe environmental destruction. Fast fashion's environmental repercussions and lingering impacts on the earth, including as depletion of resources, and trash creation, can be illuminated through research. Fast fashion is based on low-cost production, which is frequently done in underdeveloped nations where workers endure terrible working conditions and low salaries. Learning about the social and economic repercussions on teenagers in these places can help improve working conditions and promote fair trade practices. In this research we will be using Statistical Package for Social Sciences (SPSS). As per the SPSS Analysis we get to know that in Reliability Statistics Cronbach’s Alpha is 0.784, Cronbach's Alpha Based on Standardized Items is 0.790 and Number of Items is 7. From the above results I conclude that in Reliability Statistics Cronbach’s Alpha is 0.784, Cronbach's Alpha Based on Standardized Items is 0.790 and Number of Items is 7.

Synthesis of Few Layers Graphene Sheets from Graphite Rod via Electrochemical Exfoliation

Graphene has many excellent properties in mechanical strength, electrical conductivity, optical transparency and thermal conductivity. The basic unit of graphene is made of hexagonal ring of carbon shape. The production of graphene in large amounts can be done using conventional ways such as chemical vapour deposition (CVD). However, the cost production is very high due to high reaction temperature. Therefore, electrochemical exfoliation could become a promising method in future because of its simple, low cost and large-scale production. Electrochemical method is performed in the manner by connecting the graphite rod to the positive terminal (anode) while the copper sheet is connected to the negative terminal (cathode) and both of were immersed into electrolyte with a distance between them. Then, due to the potential difference, the exfoliation of graphite into graphene sheets occurs. X-Ray Diffraction revealed that high amount of exfoliated graphene sheets was synthesized successfully where the peak was seen at approximately 26.60°. Fourier Transform Infrared confirmed the synthesized of graphene oxide (GO) sheets (by using H2SO4 as electrolyte) shows the higher intensity of O-H band because of strongest oxidation behaviour of H2SO4 acid among all electrolytes used in experiment. Besides. SEM images show that the morphologies of the exfoliated graphene sheets have stacked, flaky-like, wrinkled and crumpled structures.

Potential and characteristics of bio-H2 production from the garden waste of ornamental plant Malus prunifolia fruit: Comparison between ethanol-type and butyrate-type fermentations

Edible fruit waste has been studied and considered to be the ideal substrates for low-cost bio-H2 production. However, the garden waste of ornamental plant fruits, which has similar components to edible fruit, is rarely studied. In this study, the potential and characteristics of fermentative bio-H2 production from the campus ornamental plant fruit of Malus prunifolia (MP) in both ethanol- and butyrate-types were investigated. Ethanoligenens harbinense B49 and Clostridium neuense G1 were employed as the inoculums for the ethanol- and butyrate-type fermentations, respectively. The results indicated that the fruit of MP is rich in fructose and sucrose, both of strains B49 and G1 could grow well with MP powder as the carbon source for fermentation. However, a higher H2 yield of 1.77 mol-H2/mol-hexose was obtained in the butyrate-type fermentation with strain G1, which was 1.4 times of that with strain B49. C. neuense G1 was more suitable for the H2 fermentation with MP as substrate, and a H2 yield of 0.55 mol-H2/mol-hexose by strain B49 was observed in the test of buffer system exchanging from ethanol-type to the butyrate-type. In summary, garden wastes such as fruits of ornamental plants should be given more attention as low-cost fermentation substrate candidates for bio-H2 production.

Magnetic and visible light-induced novel green synthesized magnetic Co3O4 photocatalysts via sunflower seed meal extract for anionic and cationic dye removal by adsorption assisted photocatalytic degradation

This study was aimed at the preparation of m-Co3O4 NPs (magnetic Co3O4 nanoparticles) from sunflower seed meal (SFSM) which is the waste of sunflower seed oil factories, and their application as a photocatalyst for the adsorption assistant photocatalysis degradation of methylene blue (MB), and direct yellow-50 (DY-50) under the visible irradiations. Also, the photocatalytic performance of m-Co3O4 NPs was evaluated in synthetic wastewater. The produced m-Co3O4 NPs were ferromagnetic with a saturation magnetization value of 4.3 emu g−1 and the degradation of cationic MB and anionic DY-50 dyes by 100% and 93% in 20 min and 35 min, respectively, by adsorption-assisted photocatalytic process under visible light was achieved. The reactions were found to be pseudo-second-order equation for the adsorption-assisted photocatalytic process for both dyes. The photocatalytic activity of m-Co3O4 NPs decreased slightly even after five repeated cycles. These results show that the m-Co3O4 NPs can be used successfully in dye treatment in wastewater with their adsorption-assisted photocatalytic properties, activation by visible light, magnetic separability, and low-cost production.

Improvement of Productivity by Using Means of Lean Manufacturing, Just in Time, and Production Technology in Thai SMEs Manufacturing Industry

This study investigated the current situations, opportunities, and obstacles in manufacturing industry, and to create a model for improving the efficiency while reducing the levels of inventory. This study gathered information from in-depth interview using snowball sampling from 20 manufacturing companies in Thailand. The results revealed that the organization has implemented lean production principles as a strategic initiative to mitigate losses. The implementation of comprehensive work manuals, offered in diverse languages such as Thai, Burmese, Japanese, and English, serves as an additional mechanism to mitigate losses by ensuring clarity and understanding among the workforce. Furthermore, the integration of modern technologies, encompassing machine technology, robotics and artificial intelligence, is actively pursued to streamline production processes and consequently reduce losses. The results presented that companies refrain from adopting Just-In-Time production systems due to operational challenges associated with fulfilling customer orders. Specifically, frequent machine shutdowns for adjustments are necessitated, leading to elevated unit costs. Manufacturing companies in Thailand continue to harbor potential for growth, despite the inevitable rise in employee wages leading to increased operational costs. To navigate this challenging landscape, companies must remain adaptive, responding not only to shifts in customer preferences but also to advancements in technology, proactive examination of customer needs prior to initiating the production process, a paradigm shift from low-cost production to the premium-grade products addresses the demands of customers seeking superior product quality, and the process of broadening customer bases both overseas and globally, and the analysis of distinct customer groups in identifying new target demographics.

A spurious-free SAW filter employing a novel transducer structure on bulk LiNbO3 substrates

In order to cope with the ubiquitous wireless connections and the rapid transmission of data in communication systems, surface acoustic wave filters are required to have high performance. With a large electromechanical coupling coefficient (K2), conventional bulk 64°YX-LiNbO3 substrates are attractive for low-cost mass production of surface acoustic wave (SAW) resonators. However, the influence of the transverse modes restricts their practical application. In this work, a novel and simple tilted transducer is fabricated, and successfully achieved spurious-free passband SAW filters based on 64°YX-LN piezoelectric substrates. In this work, the transverse modes suppression method is theoretically studied and designed, and the effectiveness of the energy concentrated structure is verified. The optimal tilt IDT angle for eliminating the influence of transverse modes in Al/64 °YX-LN structure is about 6°. Subsequently, based on the above research, three types of tilted resonators were designed and fabricated, which not only verified the reliability of the aforementioned results but also enhanced the performance of the devices, compensating for the deficiency caused by the reduction of the Q factor due to the tilted structure. Finally, based on the double busbar tilted structure, a SAW filter was designed, which has a large 3 dB fractional bandwidth (FBW) and a spurious-free passband. The SAW filter designed in this work has low cost and excellent performance, and can be mass produced. In the field of low-cost RF devices, this work contributes to maintaining the competitive advantage of SAW technology.

MRNA vaccines: A powerful tool in cancer treatment

As an emerging immunotherapy, cancer vaccine is a method of introducing tumor antigens, genes encoding tumor antigens, immune cells and molecules into the body to activate specific immune responses to kill tumors. In April 2010, the world's first related drug, previz, was approved for marketing in United States. The drug extracts peripheral blood mononuclear cells from patients' autoimmune cells, activates them in vitro and then infuses them back into the treatment of asymptomatic or mildly symptomatic hormone-refractory advanced prostate cancer. mRNA vaccines have attracted much attention because of their high efficacy, specificity, versatility, ability to develop rapidly on a large-scale, low-cost production potential and safety. The mRNA vaccines and nano-agent delivery technology are considered to have great potential in cancer immunotherapy. In recent years, developments in the design and delivery methods of mRNA vaccines have accelerated the development and use of mRNA vaccinations against cancer in clinical settings. This review introduces optimization strategies of mRNA vaccinations against cancer, including coding and non-coding region optimization, and emphasizes mRNA vaccine delivery systems. Multiple nanoparticle vectors have currently been developed to improve mRNA stability and administration efficiency. At the same time, we discuss the applications of cancer therapy with mRNA vaccinations, its limitations and future challenges.

Microwave Assisted Williamson Synthesis: A Green Approach towards the Preparation of Ethers

Introduction: Microwave-assisted reactions align with the principles of green chemistry by significantly reducing synthesis time, avoiding high temperatures, and typically yielding high product quantities. Method: A catalyst was synthesized from waste banana peels, ensuring both availability and lowcost production. Ethers were synthesized using microwave irradiation at 300W, employing two different alkyl halide variants with both substituted and unsubstituted phenols. Results: The reaction proceeded efficiently without the need for corrosive bases such as caustic soda or caustic potash. Microwave irradiation facilitated reduced reaction times for ether formation. Additionally, the supported catalyst demonstrated the advantage of reusability. Conclusion: This protocol offers several benefits, including the use of a green solvent and the exclusion of phase transfer catalysts and harsh conditions. Consequently, an efficient and green synthesis of ethers has been achieved.

COMPETITIVE MODEL PROPOSAL FOR THE AZERBAIJAN WINE INDUSTRY: TALENT-BASED ORGANIZATIONAL MODEL

The main aim of this study is to develop a talent-based model proposition in line with the resource-based approach by assessing the strategic position of Azerbaijan's wine industry, which is globally recognized as an important wine producing country. It is noted that in the context of very important changes and events taking place in the world today, the phenomenon of competition expresses competition in all spheres of life and day by day increases its intensity and challenges modern business. The article widely uses methods of comparative analysis of the experience of foreign countries, analysis of statistical dynamics, and in-depth analyzes of economic growth in a competitive environment. The author notes that in order for businesses to compete and, moreover, achieve sustainable competitive advantage, they need to understand that the basis of competition has changed, and accordingly everyone must reconsider their approaches and define a new road map for themselves as strategic support with new methods in management. This new understanding of strategy allows companies to be unique, inimitable and responsive to define their strategy and prepare action plans to meet changing customer needs, create customer value and provide quality and low-cost products and services. The author emphasizes that businesses now realize that it is impossible to compete and survive using old methods. It is noted that the resource-based view is used as a new approach, which involves the harmonization of resources and business capabilities with their external environment to produce unique products and services. Azerbaijani wine industry businesses that can redefine their boundaries and develop external relationships using a talent-based model can expand their reach and influence to new groups of employees and entrepreneurs. In this way, Azerbaijani wine industry enterprises can create great new opportunities and offer these groups opportunities to participate in the global economy. This perspective, which sheds light on the dominant organizational logic of powerful players who influence or share the behavior of others, includes foreign competitors, suppliers and employees in the global economy. In this regard, it is very important for the Azerbaijani wine industry to have a good understanding of the interaction between global and local dynamics.

CMOS-compatible plasmonic magnetic field sensor: An alternative approach using ultra-compact MIM configuration

This paper introduces a novel magnetic field sensor (MFS) that utilizes a metal-insulator-metal (MIM) waveguide integrated with a resonator structure and incorporates water-based Fe3O4 magnetic fluid. The sensor uses titanium nitride (TiN) as the plasmonic material which offers numerous advantages over conventional noble plasmonic materials. The sensor takes advantage of the tunable optical properties of the magnetic fluid and TiN to detect changes in the external magnetic field and quantify the magnetic field strength which has been demonstrated using the Finite Element Method (FEM). Our proposed MFS exhibits a high sensitivity of 11.97 pm/Oe, a narrow-band full-width half maximum of 93.66 nm, and a resolution of 8.36 × 10−4 Oe. The sensor is also compatible with complementary metal oxide semiconductor (CMOS) fabrication techniques, which enables chip-scale integration and low-cost production. The sensor can be used for various applications in navigation, military, space, healthcare, and beyond.

Scalable Multistep Imprinting of Multiplexed Optical Anti-counterfeiting Patterns with Hierarchical Structures.

Multiplexed optical techniques with multichannel patterns provide powerful strategies for high-capacity anti-counterfeiting. However, it is still a big challenge to meet the demands of achieving high encryption levels, excellent readability, and simple preparation simultaneously. Herein, we use a multistep imprinting technique, leveraging surface work-hardening to massively produce multiplexed encrypted patterns with hierarchical structures. These patterns with coupled nano- and microstructures can be instantaneously decoded into different pieces of information at different view angles under white light illumination. By incorporating perpendicular nano- and microgratings, we achieve four-channel encoded patterns, enhancing anti-counterfeiting capacity. This versatile method works on various metal/polymer materials, offering high-density information storage, direct visibility, broad material compatibility, and low-cost mass production. Our high-performance anti-counterfeiting patterns show significant potential in real-world applications.

Bluefin tuna sperm production is hastened by surrogacy in small Euthynnus

Pacific bluefin tuna (Thunnus orientalis) remains heavily depleted due to overexploitation. Aquaculture and stock enhancement based on artificial seedlings could be effective solutions to this problem. However, widespread adoption of seedling production is limited because spawning in captivity of bluefin tuna, a large pelagic top predator, requires much space, time, cost, and labour. To downsize and shorten their generation time, here, we show that xenogeneic germ cell transplantation enables a surrogate production of functional bluefin tuna sperm in hybrid little tuna (genus: Euthynnus), which attain sexual maturity at a smaller body size and shorter time. Intraperitonially transplanted bluefin tuna germ cells migrate towards and are incorporated into the gonads of little tuna larvae. These recipients produce functional donor-derived bluefin tuna sperm at a mere 8 months of age and 1 kg of body size. This result represents an advance toward compact, low-cost, and time-efficient seedling production that will improve the efficiency of bluefin tuna aquaculture.

Comparative research on acetone-butanol-ethanol (ABE) and butanol (Bu) as next-generation biofuels in compression ignition engine

Increasing global energy demand, along with economic and environmental issues, have necessitated substituting fossil fuels with biofuels. ABE (acetone-butanol-ethanol mixture), an intermediate product of biobutanol fermentation characterized by low-cost production, has recently emerged as a promising renewable fuel to replace biobutanol (Bu) for engine applications. This study compares ABE and Bu to determine which fuel is superior. To this end, their effects on engine operation and pollutant emissions were investigated. Each biofuel was tested on a research engine under varied loading conditions after being blended with diesel fuel at concentrations of 5, 10, 20, and 30% by volume. The results revealed that the diesel (D)-ABE and diesel-biobutanol (D-Bu) blends experienced dominant premixed combustion; however, deteriorated engine performance somewhat. ABE30 and Bu30 presented the highest increases in fuel consumption (11.67% and 7.89%, respectively), and the highest decreases in thermal efficiency (2.17% and 1.17%, respectively). All fuel blends offered a remarkable concurrent reduction in NO emission and smoke opacity. More specifically, ABE20 provided an average reduction in NO and smoke opacity (41.79% and 49.59%, respectively), as compared to diesel fuel, whereas Bu20 offered a mean reduction in NO and smoke opacity (45.42% and 54.98%, respectively). Collectively, results revealed that Bu20 and its counterpart ABE20 could be the most suitable candidates among the tested fuels. Considering ABE’s lower cost and less energy intensity production process than Bu, ABE20, which is compatible with existing engine technology and improves NOX-PM trade-off with a slight sacrifice in engine performance, emerges as a most promising biofuel.

Graphene oxide/polydopamine interface co-reinforced carbon paper: With comprehensive mechanical properties, electrical conductivity and air permeability

Proton Exchange Membrane Fuel Cell ( PEMFC) are characterised by their cleanliness, efficiency and lack of pollution. Carbon paper, the fundamental material for constructing gas-diffusion layer (GDL), plays a crucial role in electron transmission, supporting the electrode structure, and proton transport. However, the traditional carbon paper for GDL significantly limits the large-scale commercial application of PEMFC due to its low mechanical strength and poor conductivity. Based on this, in this paper, polydopamine is used to modify primary carbon fiber paper, a homogeneous mixed solution of graphene oxide and phenolic resin is used as the impregnating agent, and the effects of different GO concentrations on the properties of carbon paper are investigated. The results show that the graphitization degree and mechanical properties of carbon paper are improved with the increase of GO concentration. When the content of polydopamine is 2 g/L and the concentration of GO is 0.5 wt%, the carbon paper exhibits optimal performance. The air permeability of carbon paper is 12.18 L/min, the resistivity is 13.5 mΩ·cm, and the tensile strength is 19.3 MPa. This study provides a simple method for preparing highly breathable and highly conductive carbon paper, offering a reference for achieving low-cost and high-performance carbon paper production, and facilitating the large-scale commercial production of carbon paper.

21st century Latin American synthetic peptides for their application in antivenom production

Envenomation caused by snakes, scorpions, and spiders represents a serious public health problem in Latin America. The antivenoms used for its treatment are produced by immunizing horses repeatedly with sublethal doses of animal venoms along with the adjuvant. However, venom availability is a bottleneck. Furthermore, toxin-neutralizing antibodies are only a few of the total produced with this classical method. Therefore, high doses of antivenom are required to achieve the neutralization power, which usually causes adverse reactions in the patient. With the aim of obtaining a higher proportion of toxin-neutralizing antibodies while reducing the dependency on venom availability, alternative immunization protocols have been explored using synthetic peptides with epitopes from clinically relevant toxins. The process to design an immunogenic peptide entitles: (a) choice of the medical relevant toxins in the venom; (b) identification of the epitopes in the selected toxins; (c) improvement of peptide immunogenicity; (d) immunogen synthesis; and e) in vitro and in vivo evaluation. The present article aims to review the advances in the design of immunogenic synthetic peptides for their application in antivenom production in Latin America during the 21st century. Epitopes have been identified from many clinically important toxins in Latin American snakes (snake venom metalloproteinases, snake venom serine proteases, crotamine, phospholipases A2, and three-finger toxins), scorpions (beta-mammal/insect toxin Ts1, alpha-mammal toxin Ts2, alpha-mammal toxin Ts3, toxin Ts4, and beta-mammal Tt1g neurotoxin), and spiders (dermonecrotic toxin and delta-ctenitoxin-Pn2a). Nevertheless, their application is still experimental, even though they are ideal for large-scale and low-cost antivenom production, factors that are necessary to meet national and regional demands.

De novo biosynthesis of β-Arbutin in Komagataella phaffii based on metabolic engineering strategies

Backgroundβ-Arbutin, found in the leaves of bearberry, stands out as one of the globally acknowledged eco-friendly whitening additives in recent years. However, the natural abundance of β-Arbutin is low, and the cost-effectiveness of using chemical synthesis or plant extraction methods is low, which cannot meet the requirements. While modifying the β-Arbutin synthesis pathway of existing strains is a viable option, it is hindered by the limited synthesis capacity of these strains, which hinders further development and application.ResultsIn this study, we established a biosynthetic pathway in Komagataella phaffii for β-Arbutin production with a titer of 1.58 g/L. Through diverse metabolic strategies, including fusion protein construction, enhancing shikimate pathway flux, and augmenting precursor supplies (PEP, E4P, and UDPG), we significantly increased β-Arbutin titer to 4.32 g/L. Further optimization of methanol concentration in shake flasks led to a titer of 6.32 g/L titer after 120 h of fermentation, representing a fourfold increase over the initial titer. In fed-batch fermentation, strain UA3-10 set a record with the highest production to date, reaching 128.6 g/L in a 5 L fermenter.ConclusionsThis is the highest yield in the fermentation tank level of using microbial cell factories for de novo synthesis of β-Arbutin. Applying combinatorial engineering strategies has significantly improved the β-Arbutin yield in K. phaffii and is a promising approach for synthesizing functional products using a microbial cell factory. This study not only advances low-cost fermentation-based production of β-Arbutin but also establishes K. phaffii as a promising chassis cell for synthesizing other aromatic amino acid metabolites.Graphical abstract

Novel genomic and phenotypic traits of polyhydroxyalkanoate-producing bacterium ZZQ-149, the type strain of Halomonas qinghailakensis

BackgroundPolyhydroxyalkanoates (PHAs) are optimal potential materials for industrial and medical uses, characterized by exceptional sustainability, biodegradability, and biocompatibility. These are primarily from various bacteria and archaea. Bacterial strains with effective PHA formation capabilities and minimal production cost form the foundation for PHA production. Detailed genomic analysis of these PHA-generating bacteria is vital to understand their PHA production pathways and enhance their synthesis capability.ResultsZZQ-149, a halophilic, PHA-producing bacterium, was isolated from the sediment of China’s Qinghai Lake. Here, we decoded the full genome of ZZQ-149 using Single Molecule Real Time (SMRT) technology based on PacBio RS II platform, coupled with Illumina sequencing platforms. Physiological, chemotaxonomic traits, and phylogenetic analysis based on 16 S rRNA gene and single copy core genes of ninety-nine Halomonas type strains identified ZZQ-149 as the type strain of Halomonas qinghailakensis. Furthermore, a low average nucleotide identity (ANI, < 95%) delineated the genetic differences between ZZQ-149 and other Halomonas species. The ZZQ-149 genome, with a DNA G + C content of 52%, comprises a chromosome (3, 798, 069 bps) and a plasmid (6, 107 bps). The latter encodes the toxin-antitoxin system, BrnT/BrnA. Through comprehensive genome sequencing and analysis, we identified multiple PHA-synthesizing enzymes and an unprecedented combination of eight PHA-synthesizing pathways in ZZQ-149.ConclusionsBeing a halophilic, PHA-producing bacterium, ZZQ-149 exhibits potential as a high PHA producer for engineered bacteria via genome editing while ensuring low-cost PHA production through continuous, unsterilized fermentation.

Fast and Efficient Fabrication of Functional Electronic Devices through Grayscale Digital Light Processing 3D Printing.

Fabricating polymeric composites with desirable characteristics for electronic applications is a complex and costly process. Digital light processing (DLP) 3D printing emerges as a promising technique for manufacturing intricate structures. In this study, polymeric samples are fabricated with a conductivity difference exceeding three orders of magnitude in various portions of a part by employing grayscale DLP (g-DLP) single-vat single-cure 3D printing deliberate resin design. This is realized through the manipulation of light intensity during the curing process. Specifically, the rational resin design with added lithium ions results in the polymer cured under the maximum UV-light intensity exhibiting higher electrical resistance. Conversely, sections that are only partially cured retains uncured monomers, serving as a medium that facilitates ion mobility, consequently leading to higher conductivity. The versatility of g-DLP allows precise control of light intensity in different regions during the printing process. This characteristic opens up possibilities for applications, notably the low-cost, facile, and rapid production of complex electrical circuits and sensors. The utilization of this technique makes it feasible to fabricate materials with tailored conductivity and functionality, providing an innovative pathway to advance the accelerated and facile creation of sophisticated electronic devices.