Low pH Research Articles

Acidity and hypoxia of tumor microenvironment, a positive interplay in extracellular vesicle release by tumor cells.

The complex and continuously evolving features of the tumor microenvironment, varying between tumor histotypes, are characterized by the presence of host cells and tumor cells embedded in a milieu shaped by hypoxia and low pH, resulting from the frequent imbalance between vascularity and tumor cell proliferation. These microenvironmental metabolic stressors play a crucial role in remodeling host cells and tumor cells, contributing to the stimulation of cancer cell heterogeneity, clonal evolution, and multidrug resistance, ultimately leading to progression and metastasis. The extracellular vesicles (EVs), membrane-enclosed structures released into the extracellular milieu by tumor/host cells, are now recognized as critical drivers in the complex intercellular communication between tumor cells and the local cellular components in a hypoxic/acidic microenvironment. Understanding the intricate molecular mechanisms governing the interactions between tumor and host cells within a hypoxic and acidic microenvironment, triggered by the release of EVs, could pave the way for innovative strategies to disrupt the complex interplay of cancer cells with their microenvironment. This approach may contribute to the development of an efficient and safe therapeutic strategy to combat cancer progression. Therefore, we review the major findings on the release of EVs in a hypoxic/acidic tumor microenvironment to appreciate their role in tumor progression toward metastatic disease.

The effect of biostimulants and red mud on the growth and yield of shallots in post-unlicensed gold mining soil

Abstract Shallot production in West Kalimantan is still low. Land that has the potential for the development of shallots is the soil from post-unlicensed gold mining (PUGM). The soil at PUGM was exploited very extensively and can be used to develop shallots, but it is obstacled by low pH values and nutrient content. This research aims to investigate the impact of biostimulants and red mud on the growth and yield of shallots. The experiment was carried out in two stages: (1) investigated the ratio of the red mud and PUGM soil at the laboratory and (2) investigated the biostimulants and red mud effect on two varieties of shallots in a screen house. For the second experiment, there were three factors. The first factor was the biostimulant (0, 2, 3, and 4%); the second factor was the dose of red mud (0, 2, and 4 tons ha−1); and the third factor was the shallot varieties (Bima Brebes and Tajuk). The results of the first research indicated that the application of the red mud and PUGM soil in a ratio of 1:500 and 1:1,000 had a pH of 7.88 (slightly alkaline) and 7.24 (neutral), respectively. The second study found that a 2% concentration of biostimulant increased plant height and tuber count by 23.78 cm and 6.55 tubers, respectively. The Bima Brebes variety produced better fresh tubers weight clump−1 and dry tubers weight clump−1 than the Tajuk variety, with, respectively, 42.08 g (7.36 tons ha−1) and 32.60 g (5.71 tons ha−1). These findings show that the use of the biostimulants and red mud together in integrated management can help shallots grow and produce more, especially on PUGM land that has obstacles with low soil fertility. This research contributes to the identification of sustainable solutions for agricultural development in environments that have experienced severe land degradation, such as unlicensed gold mining activities.

The Impact of Long-Term (4 Months) Exposure to Low pH and Elevated Temperature on the Growth Rate of Gold Mollies’ (Poecilia Sphenops) Larvae

Researchers in the marine ecosystem have documented the significant impacts that anthropogenic ocean acidification has on marine organisms. These include olfactory abilities in fish, impaired behavioral as well as physiological changes, including anti-predatory response leading to consequences in population dynamics and community structure. In this research, we endeavored to investigate and compare the growth rate of the gold mollies (Poecialia sphenops) larvae under a low pH of 5 water temperature of 28 O C, and a pH of 6.9 at a water temperature of 26 O conditions. The mollies larvae were weighed for four months (August, September, October, and November) and the data collected was analyzed using the Statistical Package for Social Sciences (IBM SPSS). The analysis was a multivariate test for a more complete examination of data by looking at independent variables and their relationship to one another. There was no statistically significant difference in the growth rate in August (p-value 0.969) and September (p-value 0.286) between the larvae in aquarium A (experimental) and those in aquarium D (control) at the beginning of the experiment. But there was a statistically significant difference in the third (3) month (October) P-value = 0.007 and in the fourth month (4) (November) P-value = 0.004. The low pH of 5 impacted the growth rate of the Poecilia sphenops larvae while those in the control aquarium pH of 6.9 seemed to have not been affected and grew well.

Potential of Tropically-Adapted Exotic Acid Tolerance White Maize Donor Lines in Sub-tropical Breeding Programmes for Low pH Adaptation

Low pH in soils is attributed as the main contributor to the low yields characteristic in maize production regions of Angola. Here, eight white-kernel acid soil tolerant donor lines (ASTDLs) sourced from CIMMYT-Colombia (testers) were crossed with eight white elite lines adapted to the mid-altitude climatic conditions from CIMMYT-Zimbabwe, in order to identify donor lines, which can be potential sources of acid tolerance genes in breeding programmes in Angola. The two groups of parents were crossed using a line by tester (L×T) mating design, yielding 47 crosses with sufficient seed, which were evaluated alongside eight acid tolerant commercial hybrids, during the 2014-16 cropping seasons at nine sites, representing acid and non-acid soils in Angola and Zimbabwe. Effects of general combining ability (GCA) due to lines and testers, as well as specific combining ability (SCA) on grain yield were significant (P < 0.05) under acid soils. From the CIMMYT-Zimbabwe breeding programme, inbred lines identified as ZW1, ZW4 and ZW5 together with the CIMMYT-Colombia ASTDLs (i.e., CW4 and CW8) seemed to be ideal parents for crosses that can do well under both the acid and non-acid soils. The best specific cross for acid soils was identified as ZW1 × CW8 (CH142512), whereas for non-acid soils, ZW3 × CW4 (CH142500) was identified. Interestingly, the cross ZW1 × CW8 was also observed as stable under both acid and non-acid soil conditions. Overall, data showed potential of exotic acid tolerance donor lines for enhancing low-pH adaptation in sub-tropical maize populations.

Effect of lemon juice on the chemical and microbiological quality of rainbow trout (Oncorhynchus mykiss) under refrigerated storage

<p>In recent years, there has been an increasing interest in using food additives from natural sources to improve taste, texture and extend the shelf-life of foodstuffs. The aim of this study was to examine the quality changes in trout treated with lemon juice for 21 days. Fish were divided into T0, T1, T2 and T3 and treated with 0, 1%, 2% and 3% lemon juice respectively. The lowest pH was found in T3 followed by T2, T1 and T0. A significant difference in total volatile base nitrogen (TVBN), peroxide value (PV) and free fatty acid (FFA) was observed between the control and treatments, with the lowest increase in T3 followed by T2. Total plate count (TPC) crossed the limit in T2 and T3 on the 21st day, whereas in control and T1, the permissible limit crossed on the 12th and 18th days respectively. The sensory panel rejected the control on the 12th day and T1 and T3 on the 18th day; however, T2 remained acceptable till the 21st day, thus showing the promising effect of lemon juice on the quality of trout fillet and thereby increasing the shelf-life of the product by nine days.<strong></strong></p>

PH-Driven Rotational Configuration of Keggin-Fe13 Clusters and Their Transformations.

Keggin-Fe13 clusters are considered foundational building blocks or prenucleation precursors of ferrihydrite. Understanding the factors that influence the rotational configuration of these clusters, and their transformations in water, is vital for comprehending the formation mechanism of ferrihydrite. Here, we report syntheses and crystal structures of four lanthanide-iron-oxo clusters, namely, [Dy6Fe13(Gly)12(μ2-OH)6(μ3-OH)18(μ4-O)4(H2O)17]·13ClO4·19H2O (1), [Dy6Fe13(Gly)12(μ3-OH)24(μ4-O)4(H2O)18]·13ClO4·14H2O (2), [Pr8Fe34(Gly)24(μ3-OH)28(μ3-O)30(μ4-O)4(H2O)30]·6ClO4·20H2O (3), and [Pr6Fe13(Gly)12(μ3-OH)24(μ4-O)4(H2O)18]·13ClO4·22H2O (4, Gly = glycine). Single-crystal analyses reveal that 1 has a β-Keggin-Fe13 cluster, marking the first documented instance of such a cluster to date. Conversely, both 2 and 4 contain an α-Keggin-Fe13 cluster, while 3 is characterized by four hexavacant ε-Keggin-Fe13 clusters. Magnetic property investigations of 1 and 2 show that 2 exhibits ferromagnetic interactions, while 1 exhibits antiferromagnetic interactions. An exploration of the synthetic conditions for 1 and 2 indicates that a higher pH promotes the formation of α-Keggin-Fe13 clusters, while a lower pH favors β-Keggin-Fe13 clusters. A detailed analysis of the transition from 3 to 4 emphasizes that lacunary Keggin-Fe13 clusters can morph into Keggin-Fe13 clusters with a decrease in pH, accompanied by a significant change in their rotational configuration.

Digestate from an Agricultural Biogas Plant as a Factor Shaping Soil Properties

In the context of a circular economy, special attention should be paid to the rational management of biodegradable waste. Currently, a potentially valuable waste material, rich in ingredients available to plants, is digestate, obtained as a by-product in agricultural biogas plants. The presented study aimed to determine the impact of digestate (DIG) from an agricultural biogas plant on soil reaction (pH), electrical conductivity (EC), sorption properties (SBC, HAC, CEC, BS), and chemical composition of soil. The research was based on a pot experiment in which increasing doses of liquid (LD) and solid (SD) forms of DIG were used in corn cultivation, balanced in terms of the amount of N introduced into the soil. The composition of DIG varied and depended on the LD or SD form. The LD was characterized by a lower pH value and higher EC compared to the SD form. The LD contained much less TC, fewer macroelements, and fewer trace elements. The application of LD significantly increased in the soil the content of TC, Ntot, available K, P, Fe, and Mn, and exchangeable cations K+. The SD significantly increased the content of available P, Mg, and Mn and exchangeable cations Ca2+ and Mg2+ in the soil. Both forms of digestate increased the total content of heavy metals (Cu, Cr, Pb, and Ni) in the soil. However, they did not pose a threat to the environment concerning their legally permissible levels.

Effect of Sorghum and Maize Malt Particle Size on Physicochemical, Stability, Microbiological, and Sensory Characteristics of Umqombothi

The consumption of Umqombothi alcoholic beverages in South Africa is widespread in townships and rural areas. This study aimed to investigate the effect of sorghum and maize malt particle size on the physicochemical, microbiological, stability, and sensory characteristics of Umqombothi. Three different particle sizes were compared, namely control, coarse, and fine powder particle sizes. Subsamples were taken at the following stages, during the production of Umqombothi: first, second, third, fourth, and fifth. Lactic acid bacteria were significantly dominant, with 8.16, 7.11, and 5.91 log cfu/mL in the final product for the control, coarse, and fine powder particle sizes. The yeast counts were 3.3, 4.64, and 5.63 log cfu/mL for the control, coarse, and fine powder particle sizes. Molds were significantly reduced to non-detectable levels after the second fermentation and the total coliforms in the final product were reduced for all particle sizes. The total soluble solids significantly decreased in the second fermentation samples. The coarse particle size exhibited significantly higher alcohol and significantly lower pH levels, which are encouraging signs for improved quality and shelf life. Different particle sizes of sorghum and maize malt affect the quality of the finished product and the production method of umqombothi.

Cholesterol-lowering effect of Pediococcus strains isolated from mother’s milk in mice

Purpose The Pediococcus strains belong to the group of lactic acid bacteria (LAB). This study aims to isolate and identify the Pediococcus spp. from mother’s milk, and investigate their tolerance to low pH and bile salts, antibacterial activity, attachment to HT-29 cells and effect on cholesterol-lowering and digestive enzymes in mice. Design/methodology/approach Pediococcus species were isolated from mother’s milk, then tested for tolerance to acid and bile salts, their antibacterial effect and attachment to HT-29 cell line. In mice experiment, the levels of triglyceride (TG), total cholesterol (TC), HDL cholesterol (HDL-C), LDL cholesterol (LDL-C) and digestive enzymes such as amylase and lipase in serum of mice were measured after administration of 108 CFU/mL bacterial suspension. Findings A total of 24 Pediococcus spp. including 16 isolates of Pediococcus pentosaceus and 8 isolates of Pediococcus acidilactici were isolated. Fifteen isolates (62.5%) were able to survive in low pH and bile salt concentration. Ten isolates (41.6%) exhibited the most powerful inhibitory effects against both Gram-positive and Gram-negative bacterial pathogens. A total of four Pediococcus isolates (16.67%) showed strong attachment to HT-29 cells. In contrast to HDL-C and amylase, the serum levels of TC, TG and LDL-C were reduced and lipase was elevated significantly following administration of mother milk-derived Pediococcus isolates. Originality/value The Pediococcus isolates demonstrated good probiotic properties in particular cholesterol-lowering ability in mice. Thus, after more studies they can be considered as probiotic strain(s).

Proteomes of native and non-native symbionts reveal responses underpinning host-symbiont specificity in the cnidarian-dinoflagellate symbiosis.

Cellular mechanisms responsible for the regulation of nutrient exchange, immune responses, and symbiont population growth in the cnidarian-dinoflagellate symbiosis are poorly resolved, particularly with respect to the dinoflagellate symbiont. Here, we characterised proteomic changes in the native symbiont Breviolum minutum during colonisation of its host sea anemone Exaiptasia diaphana ("Aiptasia"). We also compared the proteome of this native symbiont in the established symbiotic state with that of a non-native symbiont, Durusdinium trenchii. The onset of symbiosis between Aiptasia and Branchioglossum minutum increased accumulation of symbiont proteins associated with acquisition of inorganic carbon and photosynthesis, nitrogen metabolism, micro- and macronutrient starvation, suppression of host immune responses, tolerance to low pH, and management of oxidative stress. Such responses are consistent with a functional, persistent symbiosis. In contrast, D. trenchii predominantly showed elevated levels of immunosuppressive proteins, consistent with the view that this symbiont is an opportunist that forms a less beneficial, less well-integrated symbiosis with this model anemone. By adding symbiont analysis to the already known responses of the host proteome, our results provide a more holistic view of cellular processes that determine host-symbiont specificity and how differences in symbiont partners (i.e., native versus non-native symbionts) may impact the fitness of the cnidarian-dinoflagellate symbiosis.

Successful operation of nitrifying granules at low pH in a continuous-flow reactor: Nitrification performance, granule stability, and microbial community

Acidic nitrification, as a novel process for treating wastewater without sufficient alkalinity, has received increasing attention over the years. In this study, a continuous-flow reactor with aerobic granular sludge was successful operated at low pH (<6.5) performing high-rate acidic nitrification. Volumetric ammonium oxidation rate of 0.4–1.2 kg/(m3·d) were achieved with the specific biomass activities of 5.8–13.9 mg N/(gVSS·h). Stable partial nitritation with nitrite accumulation efficiency over 85% could be maintained at pH above 6 with the aid of residual ammonium, whereas the nitrite accumulation disappeared when pH was below 6. Interestingly, the granule morphology significantly improved during the acidic operation. The increased secretion of extracellular polymeric substances (especially polysaccharides) suggested a self-protective behavior of microbes in the aerobic granules against acidic stress. 16S rRNA gene sequencing analyses indicated that Candidatus Nitrospira defluvii was always the dominant nitrite-oxidizing bacteria, while the dominant ammonia-oxidizing bacteria shifted from Nitrosomonas europaea to Nitrosomonas mobilis. This study, for the first time, demonstrated the improved stability of aerobic granules under acidic conditions, and also highlighted aerobic granules as a useful solution to achieve high-rate acidic nitrification.

A switch and a failsafe: KatG’s mechanism for preservation of catalase activity using a conformationally dynamic Arg and an active-site Trp

Many novel structural features impart a robust catalase activity to KatG that is absent from all other members of its superfamily. The conformationally dynamic “Arg switch” and oxidizable “proximal Trp” have both figured prominently in investigations of KatG structure and mechanism, but the full scope of their contributions to catalysis remains unclear. The switch (R418) appears to regulate active-site intramolecular electron transfer. The proximal Trp (W321) is a conspicuous site of radical formation, but W321•+ does not appear to participate directly in the KatG catalase cycle. To explore the extent to which these residues may cooperate in KatG’s catalase activity, we generated R418N and W321F/R418N KatG and compared their catalytic and spectroscopic properties to wt KatG. R418N KatG showed pH-independent susceptibility to H2O2-based inactivation, whereas wt KatG only showed this response under conditions where the Arg switch would be oriented away from the active site (i.e., low pH). Peroxidatic electron donors (PxEDs) prevented inactivation of wt and R418N KatG regardless of pH; however, protection of R418N KatG activity by this mechanism produced at least ten-fold greater extents of PxED oxidation. Elimination of the proximal Trp in addition to the Arg switch (i.e., W321F/R418N KatG) resulted in a near complete inability to sustain H2O2 degradation. Remarkably, W321F KatG showed resistance to H2O2-dependent inactivation indistinguishable from wt at pH 7 (i.e., when the Arg switch is oriented toward the active site) but sensitivity to H2O2-dependent inactivation indistinguishable from W321F/R418N KatG at pH 5 (i.e., when the Arg switch is oriented away from the active site). These data suggest loss of the Arg switch (either by mutagenesis or conformationally due to environmental pH) results in a KatG that is substantially compromised in the sustained degradation of H2O2. This can be overcome provided that KatG retains its ability to utilize the proximal Trp as a site of protein-based oxidation and has a PxED available to repair protein oxidation events. However, if both the Arg switch and the proximal Trp are absent, rapid H2O2-dependent inactivation is observed, and PxEDs are unable to effectively intervene to preserve KatG’s catalase activity.

Enhanced Corrosion Resistance in Aluminum-Based Electrolyzer Components via Stoichiometry Tuned Atomic Layer-Deposited TiOx Films.

Titanium (Ti) is widely used as anode current collectors in proton exchange membrane (PEM)-based water electrolyzers due to its self-passivated oxide layer, which protects it from corrosion in acidic solutions. However, the cost of the material and machining process for Ti is high. A wider utilization of water electrolyzers to produce hydrogen could be favored by the use of less expensive coated aluminum (Al) substrates, which could potentially replace high-cost Ti-based components. It is shown here by depositing a pinhole-free oxygen vacancy-rich titanium oxide (TiOx) protection layer by atomic layer deposition (ALD), the corrosion resistance of Al substrates in acidic environments at oxygen evolution potentials can be enhanced. The optimization of the oxygen vacancy concentration is accomplished by tuning the ALD parameters to achieve ideal stoichiometry and conformal coating on rough substrates. The robustness of the coatings was evaluated at high potentials (2.4 V vs NHE = normal hydrogen electrode) in low pH conditions. A low TiOx dissolution rate of the order of ∼6 nm year-1 was observed. By testing under industrially relevant conditions, i.e., high applied voltages (2.4 V) and low pH, an Al loss at around the zero ppb level was achieved using optimized ALD parameters. It is proposed that a 40 nm TiOx coating on Al may be adequate to provide 60,000 h of durability in a PEM water electrolyzer anode current collector.

Characteristics of apricot yogurt fermented with different culture straıns and stevıa

This study evaluated the effects of exopolysaccharide (EPS)-producing and non-EPS-producing culture varieties and the enriching of apricot pulp to the post-acidification process and microbiological, viscosity, antioxidant, and sensory properties of yogurt. Two groups of yogurts were produced in terms of culture variety. One of the yogurts in both groups was enriched with apricot pulp at a ratio of 10%. The natural sweetener, stevia, was added at a ratio of 0.1% to all yogurts. The lowest pH and highest acidity values were determined for the non-EPS sample produced without apricot pulp. The dry matter content of the yogurts was increased with whey protein powder. Between the yogurts produced with EPS-producing strains, the bacteria counts were higher for those enriched with apricot pulp. The highest Streptococcus thermophilus counts were determined for the sample produced with EPS-producing culture and apricot pulp at the beginning and end of the storage. Total phenolic content (TPC) was higher for the samples produced with conventional culture and enriched with apricot pulp. Similar results were observed in the antioxidant activity. Sensory attributes were considered taste, odor, appearance, texture, and overall acceptability. The yogurts produced with EPS-producing culture were preferred regarding taste, texture, and overall acceptability.

Rare Earth Element Binding and Recovery by a Beta Roll-Forming RTX Domain.

The Block V of the RTX domain of the adenylate cyclase protein from Bordetella pertussis is disordered, and upon binding eight calcium ions, it folds into a beta roll domain with a C-terminal capping group. Due to their similar ionic radii and coordination geometries, trivalent lanthanide ions have been used to probe and identify calcium-binding sites in many proteins. Here, we report using a FRET-based assay that the RTX domain can bind rare earth elements (REEs) with higher affinities than calcium. The apparent disassociation constants for lanthanide ions ranged from 20 to 75 μM, which are an order of magnitude higher than the affinity for calcium, with a higher selectivity toward heavy REEs over light REEs. Most proteins release bound ions at mildly acidic conditions (pH 5-6), and the high affinity REE-binding lanmodulin protein can bind 3-4 REE ions at pH as low as ∼2.5. Circular dichroism (CD) spectra of the RTX domain demonstrate pH-induced folding of the beta roll domain in the absence of ions, indicating that protonation of key amino acids enables structure formation in low pH solutions. The beta roll domain coordinates up to four ions in extreme pH conditions (pH < 1), as determined by equilibrium ultrafiltration experiments. Finally, to demonstrate a potential application of the RTX domain, REE ions (Nd3+ and Dy3+) were recovered from other non-REEs (Fe2+ and Co2+) in a NdFeB magnet simulant solution (at pH 6).

Effects of mixing water and environmental pH value on the properties of sulfoaluminate cement-based ultra-high water materials

In order to grasp the influence of the pH value of mixing water and environmental water on the properties of ultra-high water materials, this article separately carried out the influence of different pH values of mixing water on the properties of ultra-high water materials and the conservation of high-water materials in water environments with different pH values. Using test methods such as loss of flow time, compressive strength, Scanning Electron Microscope (SEM), X-Ray Diffraction (XRD), Thermogravimetric-Differential Thermal Analysis (TG–DTA), to conduct regular exploration and mechanism analysis. The study found that with the continuous increase of the pH value of the mixing water, the loss of flow time of the ultra-high water material gradually decreased, and the compressive strength of the samples at the same age continued to increase. A lower pH value will affect the compressive strength of the consolidated body of the ultra-high water material, but when the pH = 13 in the reaction solution, the compressive strength of the consolidated body will no longer increase and begin to produce a weakening effect. The pH of the construction water for ultra-high water materials is recommended to be 4–13. At the same time, it was found that under the conservation of an acidic environment, the consolidated body was severely eroded and the strength loss was large. The acid–base environment of the goaf suitable for filling with the ultra-high water material should be between pH = 7–10 to ensure that the filling body is not weakened by erosion.

Investigation of the properties of Mg(OH)2 extracted from magnesium-rich brine via the use of an industrial by-product

Compared with magnesium oxide (MgO) produced through the dry route, the wet route production can lead to MgO with a high purity and reactivity. During this process, the use of chemical alkalis to precipitate the precursor, magnesium hydroxide (Mg(OH)2), is the highest contributor to cost and energy consumption. This study proposes a low-cost and sustainable way to recover Mg(OH)2 from simulated reject brine using concrete wash water (CWW). Mg(OH)2, with a purity of 94 % and a recovery degree of 98 % was synthesized at room temperature. Higher stirring speed and use of low pH CWW increased the impurity (CaCO3) content. The synthesized Mg(OH)2 showed a similar reactivity to MgO synthesized from reject brine with chemical bases due to its high specific surface area (102.8 m2/g). The calcination of the synthesized Mg(OH)2, led to MgO with a higher reactivity than similar ones obtained through the wet-route. Furthermore, the textural properties of Mg(OH)2 synthesized under different conditions were evaluated to establish a correlation between the reaction conditions and reactivity of Mg(OH)2. Increase in reaction temperature led to a small crystalline size, whereas the aging process resulted in the agglomeration of the synthesized Mg(OH)2, influencing its reactivity. The findings presented in this study can pave the way for the sustainable recovery of Mg(OH)2 and its direct use as a binder or as a precursor for the production of reactive MgO.

Investigation of the properties of Mg(OH)2 extracted from magnesium-rich brine via the use of an industrial by-product

Compared with magnesium oxide (MgO) produced through the dry route, the wet route production can lead to MgO with a high purity and reactivity. During this process, the use of chemical alkalis to precipitate the precursor, magnesium hydroxide (Mg(OH)2), is the highest contributor to cost and energy consumption. This study proposes a low-cost and sustainable way to recover Mg(OH)2 from simulated reject brine using concrete wash water (CWW). Mg(OH)2, with a purity of 94 % and a recovery degree of 98 % was synthesized at room temperature. Higher stirring speed and use of low pH CWW increased the impurity (CaCO3) content. The synthesized Mg(OH)2 showed a similar reactivity to MgO synthesized from reject brine with chemical bases due to its high specific surface area (102.8 m2/g). The calcination of the synthesized Mg(OH)2, led to MgO with a higher reactivity than similar ones obtained through the wet-route. Furthermore, the textural properties of Mg(OH)2 synthesized under different conditions were evaluated to establish a correlation between the reaction conditions and reactivity of Mg(OH)2. Increase in reaction temperature led to a small crystalline size, whereas the aging process resulted in the agglomeration of the synthesized Mg(OH)2, influencing its reactivity. The findings presented in this study can pave the way for the sustainable recovery of Mg(OH)2 and its direct use as a binder or as a precursor for the production of reactive MgO.

Application of Silver Nanoparticles Supported over Mesoporous Carbon Produced from Sustainable Sources as Catalysts for Hydrogen Production

The growing population and increasingly competitive economic climate have increased the demand for alternative fuel sources, with hydrogen being one of the more viable options. Many metal hydrides, including sodium borohydride, are capable of releasing hydrogen stored within chemical bonds when reacted with water, but the rate of generation is slow and therefore necessitates a catalyst. Silver nanoparticles, which were chosen due to their known catalytic activity, were synthesized from sodium citrate and were embedded in mesoporous carbon to form a nano-composite catalyst (Ag-MCM). This composite was characterized via Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), and Scanning Electron Microscopy/Energy-Dispersive X-ray Spectroscopy (SEM/EDS). Catalytic testing showed that the catalytic activity for the Ag-MCM catalyst increased with increasing NaBH4 concentration, low pH, and high temperatures. The Ag-MCM catalyst resulted in the activation energy at 15.6 kJ mol−1, making it one of the lowest seen activation energies for inorganic catalysts. Lastly, the Ag-MCM catalysts showed stability, producing, on average, 20.0 mL per trial for five consecutive trials. This catalytic ability along with the cheap, carbon-based backbone that is made from readily available corn starch, makes it a promising catalyst for the hydrolysis of NaBH4.

Application of Silver Nanoparticles Supported over Mesoporous Carbon Produced from Sustainable Sources as Catalysts for Hydrogen Production

The growing population and increasingly competitive economic climate have increased the demand for alternative fuel sources, with hydrogen being one of the more viable options. Many metal hydrides, including sodium borohydride, are capable of releasing hydrogen stored within chemical bonds when reacted with water, but the rate of generation is slow and therefore necessitates a catalyst. Silver nanoparticles, which were chosen due to their known catalytic activity, were synthesized from sodium citrate and were embedded in mesoporous carbon to form a nano-composite catalyst (Ag-MCM). This composite was characterized via Transmission Electron Microscopy (TEM), X-ray Diffraction (XRD), and Scanning Electron Microscopy/Energy-Dispersive X-ray Spectroscopy (SEM/EDS). Catalytic testing showed that the catalytic activity for the Ag-MCM catalyst increased with increasing NaBH4 concentration, low pH, and high temperatures. The Ag-MCM catalyst resulted in the activation energy at 15.6 kJ mol−1, making it one of the lowest seen activation energies for inorganic catalysts. Lastly, the Ag-MCM catalysts showed stability, producing, on average, 20.0 mL per trial for five consecutive trials. This catalytic ability along with the cheap, carbon-based backbone that is made from readily available corn starch, makes it a promising catalyst for the hydrolysis of NaBH4.