Lower East Rift Zone Eruption Research Articles

Pulsing in the Ahu‘ail‘au pond–spillway system during the 2018 Klauea eruption: a dynamical systems perspective

During the 2018 K $\unicode{x012B}$ lauea lower East Rift Zone eruption, lava from 24 fissures inundated more than 8000 acres of land, destroying more than 700 structures over three months. Eruptive activity eventually focused at a single vent characterized by a continuously fed lava pond that was drained by a narrow spillway into a much wider, slower channelized flow. The spillway exhibited intervals of ‘pulsing’ behaviour in which the lava depth and velocity were observed to oscillate on time scales of several minutes. At the time, this was attributed to variations in vesiculation originating at depth. Here, we construct a toy fluid dynamical model of the pond–spillway system, and present an alternative hypothesis in which pulsing is generated at the surface, within this system. We posit that the appearance of pulsing is due to a supercritical Hopf bifurcation driven by an increase in the Reynolds number. Asymptotics for the limit cycle near the bifurcation point are derived with averaging methods and compare favourably with the cycle periodicity. Because oscillations in the pond were not observable directly due to the elevation of the cone rim and an obscuring volcanic plume, we model the observations using a spatially averaged Saint-Venant model of the spillway forced by the pond oscillator. The predicted spillway cycle periodicity and waveforms compare favourably with observations made during the eruption. The unusually well-documented nature of this eruption enables estimation of the viscosity of the erupting lava.

Estimates of Crystallinity Utilizing Differential Scanning Calorimetry: Application to the Kīlauea 2018 Lower East Rift Zone Eruption

Abstract Rocks produced by diverse processes, from condensation in space to impacts on planetary surfaces to volcanism, contain both crystals and amorphous material. Crystallinity provides information on the thermal history of the sample and is especially important in characterizing volcanic rocks and pyroclasts because lava rheology is profoundly influenced by the crystal content. Crystallinity is typically quantified via microscopy, using transmitted light or backscattered electrons. However, many samples present visibly ambiguous textures such as intimate intergrowth of crystal phases, and/or crystal sizes extending down to the nanometer scale. Here, we apply calorimetric methods involving heat capacity and enthalpy to assess the crystallinity of a series of volcanic samples. We tested three different approaches, using differential scanning calorimetry, on 30–40 mg aliquots of powdered basalts from the 2018 Kīlauea lower East Rift Zone. The first approach involves determining the magnitude of the increase in heat capacity at the glass transition, which can determine crystallinity to a 1σ precision of ±3%. The second approach is based on the enthalpy of fusion, which requires a longer more complex procedure with results that are typically more uncertain than for the heat capacity method, with a 1σ of ±6%. A final method utilizing differences in enthalpies calculated from the heat capacities required the most complex procedure and has the greatest uncertainty of ±18%. Preliminary results for lavas with microscopically determined crystallinities ranging from 11 to 98% indicate that crystallinity based on calorimetric data can be tens of percent higher than the average value identified using microscopy and petrographic analysis. Image-based methodologies applied to sections of samples reveal spatial heterogeneity and details in texture and crystallinity, whereas calorimetry-based methodologies capture the overall ‘bulk sample’ properties, unbiased by section effects or imaging resolution limits. These techniques are a powerful combination that can present complementary views of crystallinity.

Characterising the wind-advected medial fall deposit from fissure 8 fountaining during the 2018 lower East Rift Zone eruption, Kīlauea

The 2018 eruption on the lower East Rift Zone, Hawaii, involved the opening of 24 fissures before the eruption focussed on a single point source, fissure 8 (F8). This study characterises the preserved medial F8 tephra deposit using an isopach map, maximum clast size data, and total grain size distribution analysis, shedding light on the tephra transport and dispersal mechanisms beyond the F8 cone occurring during the fountaining. The medial sheet-like deposit covers approximately 0.22 km2, best fit by a Power-Law thinning rate. The TephraFits model estimated the corresponding volume of the continuous medial tephra blanket to be ~ 2 times 104 m3, just 0.02% of the total volume erupted from fissure 8. Samples from the preserved medial deposit have grain size modes of − 3.5 to − 4 Φ, compatible with Voronoi tessellation calculations. Maximum clast size did not show a ‘typical’ fining relationship with distance from the vent; instead, it shows no clear pattern. One factor was that the extremely low clast density, a function of a secondary vesiculation event, enabled the pyroclasts to be re-entrained, often repeatedly, by large eddies downwind of the vent. This should be considered in future studies of prolonged fountaining episodes as the clasts involved in the medial fall are rarely well preserved in the geologic record due to their fragile nature but their presence adds complexity to the inferred eruption dynamics.

Lava fountain jet noise during the 2018 eruption of fissure 8 of Kīlauea volcano

Real-time monitoring is crucial to assess hazards and mitigate risks of sustained volcanic eruptions that last hours to months or more. Sustained eruptions have been shown to produce a low frequency (infrasonic) form of jet noise. We analyze the lava fountaining at fissure 8 during the 2018 Lower East Rift Zone eruption of Kīlauea volcano, Hawaii, and connect changes in fountain properties with recorded infrasound signals from an array about 500 m from the fountain using jet noise scaling laws and visual imagery. Video footage from the eruption reveals a change in lava fountain dynamics from a tall, distinct fountain at the beginning of June to a low fountain with a turbulent, out-pouring lava pond surrounded by a tephra cone by mid-June. During mid-June, the sound pressure level reaches a maximum, and peak frequency drops. We develop a model that uses jet noise scaling relationships to estimate changes in volcanic jet diameter and jet velocity from infrasound sound pressure levels and peak frequencies. The results of this model indicate a decrease in velocity in mid-June which coincides with the decrease in fountain height. Furthermore, the model results suggest an increase in jet diameter, which can be explained by the larger width of the fountain that resembles a turbulent lava pond compared to the distinct fountain at the beginning of June. The agreement between the infrasound-derived and visually observed changes in fountain dynamics suggests that jet noise scaling relationships can be used to monitor lava fountain dynamics using infrasound recordings.

Can Lava Flow Like Water? Assessing Applications of Critical Flow Theory to Channelized Basaltic Lava Flows

AbstractFlowing lava and water have dramatically different physical properties but can form similar hydraulic structures, including undular hydraulic jumps, or standing wave trains. In water flows, undular hydraulic jumps are evidence of critical flow (Froude number ∼1) and open‐channel hydraulic theory provides a powerful tool for estimating flow depth and velocity. Monitoring these parameters in an active lava channel is inherently challenging, but essential for calculating lava discharge (effusion rate), a primary control on the rate of flow front advance and ultimate flow runout distance. We analyze undular hydraulic jumps in both water and lava flows to assess the conditions under which they form and, by extension, the potential use of critical flow theory to estimate, in real time, lava flow velocity, depth, and discharge. Experimental data for water flows show that these structures mark the transition from supercritical to subcritical flow. Undular hydraulic jumps in the near‐vent lava channel of the 2018 lower East Rift Zone eruption of Kīlauea, Hawaiʻi also reflect critical flow conditions; their wavelengths scale with flow depth and velocity, consistent with hydraulic theory. Calculated lava effusion rates are similar to estimates made using more traditional approaches (Jeffreys', 1925, https://doi.org/10.1080/14786442508634662, equation based on lava viscosity, density, and channel slope) and with lava volumes derived from topographic‐change mapping. From this we conclude that critical flow phenomena show great potential to track flow dynamics and inform hazard assessment for a wide range of geophysical fluids.

Damage assessment for the 2018 lower East Rift Zone lava flows of Kīlauea volcano, Hawaiʻi

Cataloguing damage and its correlation with hazard intensity is one of the key components needed to robustly assess future risk and plan for mitigation as it provides important empirical data. Damage assessments following volcanic eruptions have been conducted for buildings and other structures following hazards such as tephra fall, pyroclastic density currents, and lahars. However, there are relatively limited quantitative descriptions of the damage caused by lava flows, despite the number of communities that have been devastated by lava flows in recent decades (e.g., Cumbre Vieja, La Palma, 2021; Nyiragongo, Democratic Republic of Congo, 2002 and 2021; Fogo, Cape Verde, 2014–2015). The 2018 lower East Rift Zone (LERZ) lava flows of Kīlauea volcano, Hawaiʻi, inundated 32.4 km2 of land in the Puna District, including residential properties, infrastructure, and farmland. During and after the eruption, US Geological Survey scientists and collaborators took over 8000 aerial and ground photographs and videos of the eruption processes, deposits, and impacts. This reconnaissance created one of the largest available impact datasets documenting an effusive eruption and provided a unique opportunity to conduct a comprehensive damage assessment. Drawing on this georeferenced dataset, satellite imagery, and 2019 ground-based damage surveys, we assessed the pre-event typology and post-event condition of structures within and adjacent to the area inundated by lava flows during the 2018 LERZ eruption. We created a database of damage: each structure was assigned a newly developed damage state and data quality category value. We assessed 3165 structures within the Puna District and classified 1839 structures (58%) as destroyed, 90 structures (3%) as damaged, and 1236 (39%) as unaffected. We observed a range of damage states, affected by the structural typology and hazard characteristics. Our study reveals that structures may be damaged or destroyed beyond the lava flow margin, due to thermal effects from the lava flow, fire spread, or from exposure to a range of hazards associated with fissure eruptions, such as steam, volcanic gases, or tephra fall. This study provides a major contribution to the currently limited evidence base required to forecast future lava flow impacts and assess risk.

Kīlauea–Leilani 2018 lava flow delineation using Sentinel2 and Landsat8 images

Abstract Kīlauea is a broad shield volcano built against the southeastern slope of Mauna Loa. The summit presently has a caldera that is roughly 4 km by 3.2 km wide, and walls between 0 and 120 m high. In late April 2018, an eruption involving both the summit crater and the lower East Rift Zone occurred. In this work a quasi-real-time estimation of the evolution of radiant lava flow extension starting from May 2018 for Kīlauea–Leilani eruption using satellite image data is presented. The active lava flow evolution was obtained using Copernicus Sentinel2 (S2) and USGS-Landsat8 (L8) polar satellites acquiring medium/high-spatial-resolution images (20 × 20 m and 30 × 30 m, respectively) in the vis–SWIR–TIR (Short wave infrared-thermal infra red) spectral range. Because of the Kīlauea eruption extension and duration, a multisensor approach was used in order to improve the timing of the information derived by high-spatial-resolution remote-sensed data merging two missions with different revisit times. The 2018 eruptions at Hawaii's Kīlauea Volcano developed rapidly after the initial activity centred on the Pu‘u ‘Ō‘o crater floor on 1 May followed by draining of the lava lake at Halemáumáu Overlook Crater in the following days. During the magma extrusion from the summit, earthquake swarms and ground cracking hit the Leilani Estates neighbourhood on 2 May. With the S2 and L8 sensors we followed the lava flow from 5 May up to mid August, considering also that the activity started to decline from the beginning of August. At the end of the activity, Kīlauea Volcano had experienced its largest lower East Rift Zone eruption and caldera collapse in at least 200 years.

Mapping pollution exposure and chemistry during an extreme air quality event (the 2018 Kīlauea eruption) using a low-cost sensor network

Extreme air quality episodes represent a major threat to human health worldwide but are highly dynamic and exceedingly challenging to monitor. The 2018 Kīlauea Lower East Rift Zone eruption (May to August 2018) blanketed much of Hawai'i Island in "vog" (volcanic smog), a mixture of primary volcanic sulfur dioxide (SO2) gas and secondary particulate matter (PM). This episode was captured by several monitoring platforms, including a low-cost sensor (LCS) network consisting of 30 nodes designed and deployed specifically to monitor PM and SO2 during the event. Downwind of the eruption, network stations measured peak hourly PM2.5 and SO2 concentrations that exceeded 75 μg m-3 and 1,200 parts per billion (ppb), respectively. The LCS network's high spatial density enabled highly granular estimates of human exposure to both pollutants during the eruption, which was not possible using preexisting air quality measurements. Because of overlaps in population distribution and plume dynamics, a much larger proportion of the island's population was exposed to elevated levels of fine PM than to SO2 Additionally, the spatially distributed network was able to resolve the volcanic plume's chemical evolution downwind of the eruption. Measurements find a mean SO2 conversion time of ∼36 h, demonstrating the ability of distributed LCS networks to observe reaction kinetics and quantify chemical transformations of air pollutants in a real-world setting. This work also highlights the utility of LCS networks for emergency response during extreme episodes to complement existing air quality monitoring approaches.

Brittle fragmentation by rapid gas separation in a Hawaiian fountain

Brittle fragmentation, generating small pyroclasts from magma, is a key process determining eruptive style. How low-viscosity magma fragments within a rising fountain in a brittle manner, however, is not well understood. Here we describe a fragmentation process in Hawaiian fountains on the basis of observations from the 2018 lower East Rift Zone eruption of Kīlauea Volcano, Hawai’i. The dominant fragmentation mechanism is inertia driven and produces a population of large fluidal pyroclasts. However, when sufficient volcanic gas is released in the fountain, a subpopulation of smaller and more vesicular pyroclasts is generated and entrained into the gas-dominant convective plume. The size distribution of these pyroclasts is similar to that of brittlely fragmented solid materials. The erupted high-vesicularity pyroclasts sometimes preserve a deformed shape. These observations suggest that late-stage rapid expansion lowers the gas temperature adiabatically and cools the outer surface of liquid pyroclasts below the glass transition temperature. The rigid crust fragments as the hot interior attempts to expand due to further volatile diffusion from the melt into bubbles. Adiabatic expansion of volcanic gas occurs in all eruptions. Brittle fragmentation induced by rapid adiabatic cooling may be a widespread process, although of varying importance, in explosive eruptions. In a Hawaiian fountain eruption, rapid gas expansion cools the melt below the glass transition temperature and causes brittle magma fragmentation, producing small, vesicular pyroclasts, according to observations of the 2018 eruption of Kīlauea.

Lava effusion rate evolution and erupted volume during the 2018 Kīlauea lower East Rift Zone eruption

The 2018 eruption on the lower East Rift Zone of Kīlauea Volcano produced one of the largest and most destructive lava flows in Hawai’i during the past 200 years. Over the course of more than 3 months, twenty-four fissures erupted, and the rate of lava effusion varied by two orders of magnitude, with significant implications for evolving flow behavior and hazards. Syn-eruptive data were collected to quantify these changes in lava effusion rate, including video of flow through channels and digital elevation models acquired using small unoccupied aircraft systems, airborne lidar, and airborne single-pass interferometric synthetic aperture radar. Topographic data through time allowed calculation of subaerial lava flow volume and time-averaged discharge rate over the course of the eruption, which we integrated with pre- and post-eruption bathymetric surveys. Repeat videos of the near-vent channel were analyzed with particle velocimetry to extract flow velocities, and these were combined with open channel flow theory to calculate a time series of instantaneous effusion rates. Results show a general increase in dense rock equivalent (DRE) effusion rate from ~7 to ~100 m3/s from early to late May for the whole flow field and ≥ 200 m3/s by mid-June after the eruption had focused at a primary vent. By the end of the eruption in August, 0.9–1.4 km3 DRE of lava had erupted, with 0.4 km3 deposited on land and at least 0.5 km3 offshore. The trends in effusion rate through time reflect magmatic processes in the connected summit and rift zone system that controlled eruption rate, with resulting implications for lava flow dynamics and hazards.

Earthquake collapse mechanisms and periodic, migrating seismicity during the 2018 summit collapse at Kīlauea caldera

The 2018 Lower East Rift Zone eruption of Kīlauea volcano was accompanied by a remarkable and periodic succession of collapses in the summit region. Between May-August the eruption and collapse sequence included 54 earthquakes (M∼5; M5s) observed worldwide, and over 45,000 intervening earthquakes (M≥0). We estimated seismic full moment tensors for the M5s and analyzed the spatiotemporal evolution of the intervening seismicity. The hypocenters were concentrated between 0-3 km depths and reveal arcuate bands that migrated outward by ∼300 m (map view) and downward by ∼200 m. The temporal evolution reveals almost daily successions of escalating earthquake swarms, followed by an M5, followed by a quiescent period. The moment tensors reveal consistent collapse mechanisms with vertical P-axis orientations. Poisson's ratios estimated from the moment tensors were variable at first (ν=0.1−0.3) and from June 26 onward converged to ν∼0.28, similar to loading cycles observed in lab experiments. The shallower collapses approximately follow the expanding contour of the crater, while deeper collapses aggregate first to the north of the previous crater and later to the east and south. We interpret that the magma storage complex beneath the summit region comprises a distributed plexus of cracks that progressively evacuated and underwent collapse as magma drained from the summit region to feed the eruption.

Comprehensive High‐Precision Relocation of Seismicity on the Island of Hawai‘i 1986–2018

AbstractAbundant seismicity beneath the Island of Hawai‘i from mantle depths to the surface plays a central role in understanding how volcanoes work, grow, and evolve at this intraplate oceanic hotspot. We perform systematic waveform cross‐correlation, cluster analysis, and relative relocation of 347,445 events representing 32 years of seismicity on and around the island from 1986 to 2018. We successfully relocate 275,009 (79%) events using ∼1.7 billion differential times (P and S) from ∼128 million similar‐event pairs. The results reveal a dramatic sharpening of seismicity along faults, streaks, rings, rift zones, magma pathways, and mantle fault zones; seismicity delineating crustal detachments on the flanks of Kīlauea and Mauna Loa is particularly well‐resolved. The resulting high‐precision spatio‐temporal image of seismicity captures almost the entire 1983–2018 Pu‘u ‘Ō‘ō‐Kūpaianaha eruption of Kīlauea with its numerous distinct episodes and wide‐ranging activity, culminating in the 2018 lower East Rift Zone eruption and summit collapse.

Estimates of lava discharge rate of 2018 Kīlauea Volcano, Hawaiʻi eruption using multi-sensor satellite and laboratory measurements

ABSTRACT The 2018 lower East Rift Zone eruption (LERZ) at Kīlauea Volcano, Hawaiʻi, was the largest event of the last 200 years at the LERZ. Here, we present a lava discharge rate estimation of this eruption by combining a joint analysis of multi-sensor infrared (IR) satellite remote sensing imagery of the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Visible Infrared Imaging Radiometer Suite (VIIRS) with laboratory measurements of lava properties. The time-averaged discharge rate (TADR) based estimation of the erupted lava volume resulted in circa 9.24 × 108 ± 4.62 × 108 m3 for the subaerial part of the 2018 LERZ eruption. The lava effusion at the LERZ began on 3 May 2018, with relatively low mean output rates of 2.82 ± 1.41 m3 s−1, which then almost doubled after 12 May to 4.94 ± 2.47 m3 s−1, increased after 19 May to 64.97 ± 32.48 m3 s−1 and from 28 May onwards until beginning of August 2018 up to 137.67 ± 68.83 m3 s−1.

Two Ensemble Approaches for Forecasting Sulfur Dioxide Concentrations from Kīlauea Volcano

AbstractKīlauea volcano, located on the island of Hawaii, is one of the most active volcanoes in the world. It was in a state of nearly continuous eruption from 1983 to 2018 with copious emissions of sulfur dioxide (SO2) that affected public health, agriculture, and infrastructure over large portions of the island. Since 2010, the University of Hawaiʻi at Mānoa provides publicly available vog forecasts that began in 2010 to aid in the mitigation of volcanic smog (or “vog”) as a hazard. In September 2017, the forecast system began to produce operational ensemble forecasts. The months that preceded Kīlauea’s historic lower east rift zone eruption of 2018 provide an opportunity to evaluate the newly implemented air quality ensemble prediction system and compare it another approach to the generation of ensemble members. One of the two approaches generates perturbations in the wind field while the other perturbs the sulfur dioxide (SO2) emission rate from the volcano. This comparison has implications for the limits of forecast predictability under the particularly dynamic conditions at Kīlauea volcano. We show that for ensemble forecasts of SO2 generated under these conditions, the uncertainty associated with the SO2 emission rate approaches that of the uncertainty in the wind field. However, the inclusion of a fluctuating SO2 emission rate has the potential to improve the prediction of the changes in air quality downwind of the volcano with suitable postprocessing.

Seismic velocity variations associated with the 2018 lower East Rift Zone eruption of K\u012blauea, Hawai\u02bbi

The 2018 lower East Rift Zone eruption of Kīlauea (Hawai‘i) marked a dramatic change in the volcano’s 35-year-long rift zone eruption. The collapse of the middle East Rift Zone vent Pu‘u ‘Ō‘ō was followed by one of the volcano’s most voluminous eruptions in 500 years. Over the course of this 3-month eruption, the draining of summit-stored magma led to near-daily collapses of a portion of the caldera and ultimately up to 500 m of summit subsidence. While deformation data indicated that the summit and middle East Rift Zone were inflating for the previous several years, why Pu‘u ‘Ō‘ō collapsed and what initiated down-rift dike propagation remains unclear. Using ambient noise seismic interferometry, we show that a Ml5.3 decollement earthquake beneath Kīlauea’s south flank in June 2017 induced a coseismic decrease of up to 0.30% in seismic velocity throughout the volcano. This velocity decrease may have been caused by dynamic stress–induced shallow crustal fracture, i.e., weakening to dilatant crack growth, and was greatest near Pu‘u ‘Ō‘ō. Additionally, we verify a pre-eruptive increase in seismic velocity, consistent with increasing pressurization in the volcano’s shallow summit magma reservoir. This velocity increase occurred coincident with the first in a series of lower-crustal earthquake swarms, 6 days before a 2-month period of rapid summit and middle East Rift Zone inflation. The increase in up-rift magma-static pressure, combined with the pre-existing weakness from the June 2017 earthquake, may have facilitated down-rift dike propagation and the devastating 2018 eruption.

Spatial and Temporal Variations in SO2 and PM2.5 Levels Around Kīlauea Volcano, Hawai'i During 2007–2018

Among the hazards posed by volcanoes are the emissions of gases and particles that can affect air quality and damage agriculture and infrastructure. A recent intense episode of volcanic degassing associated with severe impacts on air quality accompanied the 2018 lower East Rift Zone (LERZ) eruption of Kīlauea volcano, Hawai'i. This resulted in a major increase in gas emission rates with respect to usual emission values for this volcano, along with a shift in the source of the dominant plume to a populated area on the lower flank of the volcano. This led to reduced air quality in downwind communities. We analyse open-access data from the permanent air quality monitoring networks operated by the Hawai'i Department of Health (HDOH) and National Park Service (NPS), and report on measurements of atmospheric sulfur dioxide (SO2) between 2007 and 2018 and PM2.5 (aerosol particulate matter with diameter <2.5 μm) between 2010 and 2018. Additional air quality data were collected through a community-operated network of low-cost PM2.5 sensors during the 2018 LERZ eruption. From 2007 to 2018 the two most significant escalations in Kīlauea's volcanic emissions were: the summit eruption that began in 2008 (Kīlauea emissions averaged 5–6 kt/day SO2 from 2008 until summit activity decreased in May 2018) and the LERZ eruption in 2018 when SO2 emission rates reached a monthly average of 200 kt/day during June. In this paper we focus on characterizing the airborne pollutants arising from the 2018 LERZ eruption and the spatial distribution and severity of volcanic air pollution events across the Island of Hawai'i. The LERZ eruption caused the most frequent and severe exceedances of the Environmental Protection Agency (EPA) PM2.5 air quality threshold (35 μg/m3 as a daily average) in Hawai'i in the period 2010–2018. In Kona, for example, the maximum 24-h-mean mass concentration of PM2.5 was recorded as 59 μg/m3 on the twenty-ninth of May 2018, which was one of eight recorded exceedances of the EPA air quality threshold during the 2018 LERZ eruption, where there had been no exceedances in the previous 8 years as measured by the HDOH and NPS networks. SO2 air pollution during the LERZ eruption was most severe in communities in the south and west of the island, as measured by selected HDOH and NPS stations in this study, with a maximum 24-h-mean mass concentration of 728 μg/m3 recorded in Ocean View (100 km west of the LERZ emission source) in May 2018. Data from the low-cost sensor network correlated well with data from the HDOH PM2.5 instruments, confirming that these low-cost sensors provide a robust means to augment reference-grade instrument networks.

Interseismic Quiescence and Triggered Slip of Active Normal Faults of Kīlauea Volcano's South Flank During 2001–2018

AbstractThe mobile south flank of Kīlauea Volcano hosts two normal fault systems, the Koa'e fault system (KFS) and the Hilina fault system (HFS). In historical time, at least three M&gt;6.5 earthquakes have occurred on the basal detachment of the Kīlauea Volcano's south flank, with the most recent being the 4 May 2018 M6.9 earthquake. Here we analyze kinematic Global Positioning System data collected from 2001 to 2017 and interferometric synthetic aperture radar data before, during, and after the 2018 M6.9 earthquake to determine the crustal motion across the HFS and KFS faults. Our results indicate that the HFS faults did not significantly slip during the interseismic period from 2007 to 2011. Despite its substantial magnitude, interferometric synthetic aperture radar (InSAR) data show that the 2018 M6.9 earthquake triggered subcentimeter level slip along sections of the previously mapped HFS branches. Up to 20 cm of offset occurred on what appears to be a newly formed (or previously unknown) fault near the eastern end of the HFS. During the 3 months following the M6.9 earthquake, up to ~30 cm of slip occurred along the KFS, which helps accommodate rapid large‐scale subsidence of Kīlauea's summit region as large volumes of summit reservoir magma fed the lower East Rift Zone eruption. The HFS appears to activate only in concert with large earthquakes on the basal detachment. The KFS, on the other hand, moves both seismically during small local earthquakes and aseismically in response to nearby earthquakes and caldera subsidence.

Decrease in Seismic Velocity Observed Prior to the 2018 Eruption of Kīlauea Volcano With Ambient Seismic Noise Interferometry

AbstractThe 2018 Kīlauea eruption was a complex event that included deformation and eruption at the summit and along the East Rift Zone. We use ambient seismic noise interferometry to measure time‐lapse changes in seismic velocity of the volcanic edifice prior to the lower East Rift Zone eruption. Our results show that seismic velocities increase in relation to gradual inflation of the edifice between 1 March and 20 April. In the 10 days prior to the 3rd of May eruption onset, a rapid seismic velocity decrease occurs even though the summit is still inflating. We confirm that intereruptive velocity change is correlated with surface deformation, while the velocity decrease prior to eruption is likely due to accumulating damage induced by the pressure exerted by the magma reservoir on the edifice. The accumulating damage and subsequent decrease in bulk edifice strength may have facilitated increased transport of magma from the summit reservoir to the Middle East Rift Zone.

SectorInsight.gov–Crisis Remote Sensing during the 2018 Lower East Rift Zone Eruption of K lauea Volcano

SectorInsight.gov–Crisis Remote Sensing during the 2018 Lower East Rift Zone Eruption of K lauea Volcano