Low Concentration Levels Research Articles

Updating information of mycoses and antifungal medicines to find effective platforms for the production of new thiazole compounds

Introduction. Information about mycoses and antifungal drugs of the modern type is often fragmentary and unsystematic, which requires correction.Aim. To systematize the latest information about fungi and mycoses, means of combating them and the problems encountered along the way, to highlight the latest achievements in the field of synthesis and research of the activities of 1,2,4-triazole as a potential fungicidal compound.Materials and methods. The materials were the authors' research published in advanced scientific journals, conducted around the world in the field of studying fungi, antifungal drugs, and the search for new antifungal agents.Results and discussion. The article provides an overview of current information on the morphobiological features of fungi, updating their taxonomy and nomenclature, shows the role of fungi in nature and the development of fungal infections in humans and animals, structured information on the classification of mycoses and their pathogens. The latest information is also provided on the pharmacological properties of the main currently existing antifungal drugs, the mechanisms of formation of resistance to them in fungi, in a comparative aspect with other groups of antimycotic drugs, the prospects of azoles and their derivatives as new fungicidal drugs and disinfectants are shown. Literature studies have shown that 1,2,4-triazole derivatives have a wide range of antifungal activity, which extends to other types of activity.Conclusion. It was noted that the significant prospects of triazoles are due, among other things, to the fungicidal effect on resistant strains of fungi-pathogens of human and animal infections. The advantage of the new derivatives is the low level of concentrations suppressing fungi, low cytotoxicity, which allows them to be used for intravenous administration in the future. Updating information on the effectiveness of new antifungal compounds will help researchers systematize knowledge about the properties of azoles, which can contribute to the search and development of new potential candidates for antifungal drugs with high efficiency and selectivity, and contribute to the formation of new research directions for the search for effective means of combating mycoses in various fields of human activity.

Glycan-Evocated Metallization for Amplification-Free Electrochemical Detection of Glycoproteins at Low Concentration Levels.

Glycoproteins have become the most often screened tumor markers in the in vitro diagnostics. Although a large number of electrochemical methods have been proposed to sensitively detect glycoproteins, most of them involve the aid of laborious signal amplification. Herein, we report the use of glycan-evocated metallization (GlyMetal) for the amplification-free electrochemical detection of glycoproteins at low concentration levels. Briefly, the glycoproteins of interest are captured by an aptamer recognition layer, and then the glycans of targets are oxidized by NaIO4 to convert the 1,2-diol sites into aldehyde groups for the silver deposition-based metallization, followed by the electrochemical stripping assay of the deposited metallic silver for glycoprotein quantification via the established solid-state Ag/AgCl voltammetric process. As GlyMetal can enable the deposition of a large amount of metallic silver and a high signal-to-background ratio can be obtained for the solid-state Ag/AgCl voltammetric stripping assay, the developed GlyMetal-based electrochemical method is applicable to the amplification-free detection of glycoproteins. As a proof of concept, a detection limit of 1.65 pg/mL has been achieved for carcinoembryonic antigen (CEA) detection. In addition to the high selectivity, desirable results have been obtained with respect to the use of the method for CEA detection in serum samples. In consideration of the desirable simplicity, short assay time, and cost-effectiveness of the amplification-free approach, the GlyMetal-based electrochemical method shows great promise in the point-of-care detection of glycoproteins.

Positional assessment of Concentration among Mysore University Inter-collegiate Male Hockey Players

The Purpose of this investigation was to explore the level of Concentration between different positional play of Mysore University Inter-Collegiate Male Hockey players, the aged between 18 to 22 years. The researcher has randomly selected 165 Male Field Hockey Players those who were Participated in Mysore city inter collegiate Hockey tournament and those who are practicing regularly. The researcher was classified the total samples into eleven (11) categories according to positional play, such as Center forward, right in and right out, Left in and Left out, Center Mid, Right and Left Mid, Left defender, Right & Left Defender and Goal Keeper and the samples were consisted fifteen (N=15) for each position. The Knox Cube imitation test was administered to know the level of concentration among selected subjects. In order to examine the hypotheses of the study one-way ANOVA test was used for multiple comparisons between mean scores of players in different positions for variables of concentration. The findings of the investigation showed that, the Concentration level was found to be higher for goal keeper than the other positional players. Whereas, the left midfielder had low level of concentration when compare with others which was clearly indicated that, there were significant differences in concentration of selected field hockey players with positional wise. On the basis of the present investigation, it will be summarized that the concentration was influencing by different positional play.

Guinea pig spermatozoa adhesion to an immobilized fibronectin matrix alters their physiology and increases their survival.

Isthmus is the region of the oviduct considered a reservoir for spermatozoa, where they are retained and then released synchronously with ovulation. Integrins mediate this interaction, and it is suggested that they regulate the viability and capacitation of spermatozoa. Spermatozoa retained in the oviductal epithelial cells show specific characteristics: normal morphology, intact acrosome and plasma membrane, no DNA fragmentation, and low levels of intracellular Ca2+ and protein phosphorylation at Tyr. This work aimed to define spermatozoa's ability to adhere to an immobilized fibronectin matrix and its effects on their viability and capacitation. We found that guinea pig spermatozoa showed a high affinity for adhering to an immobilized fibronectin matrix but not to those made up of type 1 collagen or laminin. This interaction was mediated by integrins that recognize the RGD domain. Spermatozoa adhered to an immobilized fibronectin matrix were maintained in a state of low capacitation: low levels of intracellular concentration of Ca2+, protein phosphorylation in Tyr and F-actin. Also, spermatozoa kept their plasma membrane and acrosome intact, flagellum beating, and showed low activation of caspases 3/7. The spermatozoa adhered to the immobilized fibronectin matrix, gradually detached, forming rosettes and did not undergo a spontaneous acrosomal reaction but were capable of experiencing a progesterone-induced acrosomal reaction. In conclusion, the adhesion of spermatozoa to an immobilized fibronectin matrix alters the physiology of the spermatozoa, keeping them in a steady state of capacitation, increasing their viability in a similar way to what was reported for spermatozoa adhered to oviductal epithelial cells.

Enhanced efficiency of water purification plant by combined riverbank filtration

Water shortages occur due to several factors, with drought being one of the biggest drivers. Another major environmental issue related to the contamination of freshwater systems worldwide is thousands of micropollutants, although they generally occur at low concentration levels. The provision of safe drinking water to the population in rural developing nations remains a problem, in particular when surface water and shallow wells or non-watertight headworks wells serve as sources of drinking water. Dramatically changing raw water qualities, floods and high rainfall events anthropogenic pollution, lack of electricity supply in developing regions demand new and adapted solutions for treatment and rendering water safe for distribution. Our study aimes to find another source of water supply using riverbank filtration (RBF). The RBF is a water treatment method that removes water from rivers by pumping wells into a nearby alluvial aquifer. Several physical, chemical, and biological processes that occur underground improve the quality of surface water and eliminate the need for traditional potable water treatment. Additional treatment techniques in this process include biological degradation, sorption, and filtration. Physical, chemical, and microbiological variables were used to assess the effectiveness of the RBF system in Upper Egypt. Our study proposes a workable water treatment strategy that replaces RBF treatment or pretreatment technique for high-quality Nile water to eliminate or reduce surface water pollutants without the use of chlorine.

Quantitative determination by UHPLC-MS/MS of 18 common drugs of abuse and metabolites, including THC and OH-THC, in volumetric dried blood spots: a sustainable method with minimally invasive sampling

The increased use of drugs of abuse urges forensic toxicologists to create quick, simple, minimally invasive sampling techniques for biological fluids combined with analytical methods assuring accurate results. To this purpose, a method was developed aimed at quantifying 18 drugs of abuse and metabolites in DBS. Validation of the method was conducted by spiking blank whole blood with the analytes on Capitainer® B cards. The extracts were analyzed by a targeted UHPLC-MS/MS method. Linear calibration was achieved in the range of 1–100 ng/mL for: amphetamine, MDA, MDMA, methamphetamine, cocaine, codeine, benzoylecgonine, cocaethylene, morphine, 6-MAM, buprenorphine, methadone, EDDP, ketamine, norbuprenorphine norketamine, THC, and OH-THC. Experimental LOD was found at 0.5 ng/mL for all analytes except for norbuprenorphine, THC and THC-OH which yielded a LOD of 1 ng/mL. Intra- and inter-day accuracy was satisfactory with bias% resulting within 5%. Evaluation of intra- and inter-day precision yielded CV% values within 20%, for all compounds except EDDP. Average extraction recovery calculated at low (2 ng/mL) and high (75 ng/mL) concentration levels was 63% while average matrix effect determined at the same levels was found to be within 85% − 115% for all analytes except from codeine (70%) and MDMA (131%). The method was applied to authentic blood samples spotted onto the DBS card and the minimum value detected was 1.3 ng/mL. HPLC-MS/MS proved capable to identify all the targeted analytes at low concentrations in the small blood volumes obtainable from DBS cards, which in turn confirmed to be effective and sustainable micro-sampling devices.

Eu-MOF-based highly sensitive and selective luminescence probe for trace, in situ and visual detection of flunitrazepam

Flunitrazepam, as an emerging new psychoactive substance classified as a third-generation drug that is more harmful and camouflaged, is gradually proliferating globally. Maliciously used as a criminal tool in homicide and rape cases, it has already caused serious harm to public safety and social stability. Owing to its special molecular structure, low concentration level and rapid metabolic process in the human body, accurate detection of flunitrazepam remains a major challenge, especially for real sample and on-site detection. In this paper, a lanthanide MOF (Eu-MOF) based on bi-ligand was constructed as a luminescence probe and used for the first time to detect trace amounts of flunitrazepam. The ’antenna effect’ promotes strong luminescence of Eu-MOF, while the lower LUMO orbital energy level of flunitrazepam allows it to accept electrons from the electron donor leading to quenching of Eu-MOF luminescence. The probe has a high sensitivity and can detect flunitrazepam in the range of 0–800 μM with a detection limit as low as 73 nM. Moreover, flunitrazepam was detected in urine from real samples as well as in a variety of beverages to further validate its accuracy and practicality. The reported Eu-MOF represents one of the pioneering luminescence probes for the detection of flunitrazepam, which offers great promise for the on-site or on-line analysis of flunitrazepam.

Neurotoxic Effects of Mixtures of Perfluoroalkyl Substances (PFAS) at Environmental and Human Blood Concentrations.

Per- and polyfluoroalkyl substances (PFAS) may cause various deleterious health effects. Epidemiological studies have demonstrated associations between PFAS exposure and adverse neurodevelopmental outcomes. The cytotoxicity, neurotoxicity, and mitochondrial toxicity of up to 12 PFAS including perfluoroalkyl carboxylates, perfluoroalkyl sulfonates, 6:2 fluorotelomer sulfonic acid (6:2 FTSA), and hexafluoropropylene oxide-dimer acid (HPFO-DA) were tested at concentrations typically observed in the environment (e.g., wastewater, biosolids) and in human blood using high-throughput in vitro assays. The cytotoxicity of all individual PFAS was classified as baseline toxicity, for which prediction models based on partition constants of PFAS between biomembrane lipids and water exist. No inhibition of the mitochondrial membrane potential and activation of oxidative stress response were observed below the cytotoxic concentrations of any PFAS tested. All mixture components and the designed mixtures inhibited the neurite outgrowth in differentiated neuronal cells derived from the SH-SY5Y cell line at concentrations around or below cytotoxicity. All designed mixtures acted according to concentration addition at low effect and concentration levels for cytotoxicity and neurotoxicity. The mixture effects were predictable from the experimental single compounds' concentration-response curves. These findings have important implications for the mixture risk assessment of PFAS.

The potential of local exhaust combined with mixing and displacement ventilation systems to mitigate COVID-19 transmission risks

The performance of two types of air diffusers, a perforated duct and a low-velocity unit coupled with local exhausts, on airborne transmission and cross-infection was investigated in a meeting room. The effect of air diffusers’ locations on airborne transmission was investigated. Six local exhausts were installed above six workstations at 2.0 m height. Respiratory-generated airborne pathogens were simulated using SF6 in the exhaled air of the manikin acting as an infected person. The SF6 concentration in the inhaled air of five susceptible persons remained steady with perforated duct located on the ceiling and at 1.7 m height attached to the corridor wall, but fluctuated greatly when perforated duct were located on the floor, although with a much lower concentration level. The perforated duct under the warm window showed the best potential for mitigating airborne transmission. The concentration in the inhaled air was varied with horizontally supplied low-velocity unit, but much steadier with low-velocity unit at 1.7 m attached to the wall. With an adjusted airflow pattern from low-velocity unit, the inhaled concentration was much lower and uniform among the five susceptible persons. The contaminant removal effectiveness (CRE) was 4.3 with perforated duct under a warm window on the floor. With an adjusted airflow pattern from low-velocity unit, the CRE was much more consistent and increased from 2.1 to 3.9 with an airflow rate from 61 l/s to 116 l/s. The infection probability was the lowest with the perforated duct on the floor and adjusted low-velocity unit.

An In Vitro Study on the Antioxidant Properties of Cistus incanus Extracts

This paper concerns the evaluation of the antioxidant activity (AA) of extracts obtained from cistus herbs grown in Albania and Turkey. The extracts were prepared in a Soxhlet apparatus, as well as by the maceration and infusion methods, similar to the home method of preparing herbal teas. AA was determined using the DPPH (2,2′-diphenyl-1-picrylhydrazyl), ABTS (2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), FRAP (ferric reducing antioxidant power) and β-carotene methods. It was proven that the AA of extracts depends not only on the extraction technique and AA assessment method but also on the place of plant cultivation. The smallest activity was determined using the β-carotene bleaching method, while the highest values were obtained using the FRAP method. On the other hand, the ABTS method showed a greater activity of the Albanian herb prepared using the Soxhlet technique. In addition, the antioxidant properties of extracts were compared with those of rutin standard solutions, showing that this characteristic component of cistus is not the only one that determines AA of extracts. As a result, the rutin content is not an indicator of the antioxidant properties of extracts. The other polyphenolic compounds, although occurring at lower concentration levels compared to rutin, modify the resultant AA of extracts. These studies confirmed the biological activity of cistus as a valuable source of polyphenolic compounds in the human diet.

Rapid Detection of Ultralow H2S Concentration with on-chip Fabrication of SnO2-based Gas Sensors by Direct Electrodeposition from Non-Aqueous Solvents

Hydrogen sulfide (H2S) causes significant impacts on human health and the environment due to its highly toxic properties. Thus, the design and development of gas sensors to detect and monitor H2S (especially at extremely low concentrations) are challenging tasks for scientists. In this work, SnO2 gas sensors were successfully synthesized directly on a chip by Sn electrodeposition from ethylene glycol solutions + a post-treatment (calcination) stage (to form and stabilize SnO2). Mechanisms and kinetics of Sn electrodeposition on Pt microelectrodes were thoroughly studied using electrochemical techniques. These fabricated gas sensors exhibit a high selectivity toward H2S gas and an effective response to low-level concentrations of H2S in the range of 0.1 ppm–1 ppm at different working temperatures. The influence of electrodeposition conditions and calcination temperatures on the gas response of sensors were also examined. The results have verified that the electrodeposition method from ethylene glycol solutions is promising for the fabrication of ultrasensitive on-chip gas sensors.

Emerging 2D nanoscale metal oxide sensor: semiconducting CeO2nano-sheets for enhanced formaldehyde vapor sensing.

Herein, we fabricated nanoscale 2D CeO2sheet structure to develop a stable resistive gas sensor for detection of low concentration (ppm) level formaldehyde vapors. The fabricated CeO2nanosheets (NSs) showed an optical band gap of 3.53 eV and cubic fluorite crystal structure with enriched defect states. The formation of 2D NSs with well crystalline phases is clearly observed from high-resolution transmission electron microscope (HRTEM) images. The NSs have been shown tremendous blue-green emission related to large oxygen defects. A VOC sensing device based on fabricated two-dimensional NSs has been developed for the sensing of different VOCs. The device showed better sensing for formaldehyde compared with other VOCs (2-propanol, methanol, ethanol, and toluene). The response was found to be 4.35, with the response and recovery time of 71 s and 310 s, respectively. The device showed an increment of the recovery time (71 s to 100 s) with the decrement of the formaldehyde ppm (100 ppm to 20 ppm). Theoretical fittings provided the detection limit of formaldehyde ≈8.86 ± 0.45 ppm with sensitivity of 0.56 ± 0.05 ppm-1. The sensor device showed good reproducibility with excellent stability over the study period of 135 d, with a deviation of 1.8% for 100 ppm formaldehyde. The average size of the NSs (≈24 nm) calculated from HRTEM observation showed lower value than the calculated Debye length (≈44 nm) of the charge accumulation during VOCs sensing. Different defect states, interstitial and surface states in the CeO2NSs as observed from the Raman spectrum and emission spectrum are responsible for the formaldehyde sensing. This work offers an insight into 2D semiconductor-based oxide material for highly sensitive and stable formaldehyde sensors.

Development and validation of a green analytical method for determining fourteen bisphenols in bee pollen by ultra-high-performance liquid chromatography-tandem mass spectrometry

A new analytical method was developed and validated to determine fourteen bisphenols (A, B, C, E, F, M, P, S, Z, AF, AP, BP, FL, PH) in bee pollen using ultra-high-performance liquid chromatography-tandem mass spectrometry. Two different sample treatments were proposed and evaluated: one based on the QuEChERS (quick, easy, cheap, effective, rugged & safe) approach and the other utilizing microextraction with a supramolecular solvent (SUPRAS). In both cases, average analyte recovery ranged between 71 % and 114 %, and the matrix effect was between −45 % and +5 %, although it was not significant when using the QuEChERS-based method (<±20 %). The environmental impact of both sample treatments was assessed using different analytical metrics, with both procedures classified as environmentally friendly, though slightly better results were obtained for SUPRAS. The method was fully validated, showing that the QuEChERS approach had better overall performance, particularly regarding sensitivity and matrix effect. Consequently, the QuEChERS methodology was applied to determine bisphenols in thirty bee pollen samples from different Spanish regions. Residues of three bisphenols (M, P, and S) were detected, although only bisphenol S was quantified in several samples at low concentration levels (<7 μg kg−1), which is below the established specific migration limit (SML; 50 μg kg−1). However, regarding human health, the estimated daily intake, target hazard quotient, and hazard index assessed were higher than acceptable limits, suggesting a potential risk for human consumers.

Total reflection x‐ray fluorescence analysis of trace elements in highly saline samples

AbstractThe reliable trace analysis of high‐purity chemicals and environmentally relevant samples is more important than ever and has led to the development of novel analytical methods. Total reflection x‐ray fluorescence (TXRF) analysis is an increasingly known method for the determination of heavy metals at low concentration levels in environmental and industrial sample systems. However, there is still a need for optimization to obtain fast and precise results, especially for highly saline samples like brines and salts used in battery production or sea water. In this study, multi‐element standard solutions containing analytes like Co, Cr, Cu, Fe, Mn, Ni, or Zn in a concentration range between 0.1 and 1 mg/L were analyzed in the matrices lithium carbonate (Li2CO3) and artificial seawater (ASW) containing 1000 mg/L Li and 24,000 mg/L NaCl, respectively, leading to matrix‐analyte ratios of up to 240,000:1. Different sample preparation methods were compared in order to achieve the highest possible repeatability (1) and signal‐to‐noise ratios (2) with the least amount of time (3). Various parameters such as sample volume, drying conditions, time, temperature and additive concentration were varied. The relative standard deviation (RSD%) was used as a measure of repeatability for three replicates per sample. For lithium carbonate, a method with a preparation time of only 2 min and a measurement time of 500 s could be developed, which allowed to obtain RSD% well below 5%, a high linearity (R2 &gt; 0.99) and limits of detection (LOD) in the range of 30 μg/L to 60 μg/L for most elements. Seawater analysis could be optimized with respect to signal‐to‐noise ratio, whereby the Kα‐line of the internal standard (Ga) was used for evaluation and the use of a desiccator was found to yield the best results.

Model based analysis of trace metal dosing strategies to improve methane yield in anaerobic digestion systems

Favourable effects of trace metals (TMs) on regulating anaerobic digestion (AD) performance are extensively utilised to improve methane yield. This study discusses a model-based approach to find out the best TM dosing strategies. The model has been applied to compare continuous, preloading, pulse dosing and in-situ loading. Simulations were also carried out to comprehend appropriate dosing form, dosing time and quantity of metals to be dosed. Model results show that the best way to dose TMs is repeated pulse dosing at low concentration levels in the optimum range with high frequency. Best dosing strategy for the system in this study was found to be 5 µM pulse loading at 5 days intervals as it gave maximum methane production and low effluent metal loss. Preferable dosing form depends on reactor configuration and this has been verified after model calibration with experimental data. Easily dissociable metal chlorides are ideal for continuous reactors.

Associations between thyroid function, thyroid diseases, and primary aldosteronism.

Previous studies focusing on primary aldosteronism (PA) and thyroid diseases were controversial. Hence, this study aimed to examine associations between thyroid function, thyroid diseases, and PA and its subtypes. This was a cross-sectional study, which enrolled 1023 patients with PA and 6138 patients with essential hypertension (EH) admitted to Hypertension Center of People's Hospital of Xinjiang Uygur Autonomous Region from August 2011 to June 2022. All patients with PA were accurately classified into aldosterone-producing adenoma (APA) and idiopathic hyperaldosteronism (IHA) by adrenal vein sampling (AVS). Multivariate logistic regression analysis was used to assess the relationship of thyroid function, thyroid nodules, and PA and its subtypes. A total of 7161 patients (327 APA and 696 IHA, and 6138 EH) were included with a mean age of 48.20 ± 8.83 years. PA patients and PA subtypes showed lower FT4, FT3, TT4, TT3, and prevalence of positive TPOAb, meanwhile higher prevalence of thyroid nodules than EH patients (PA: 56.10%, IHA: 56.90%, APA: 54.80%, and EH: 48.90%, respectively). PA (adjusted OR: 1.290, 95% CI: 1.035-1.607, P = .02) and its subtype (IHA) (adjusted OR: 1.316, 95% CI: 1.005-1.724, P = .04) were significantly associated with thyroid nodules. Compared to patients with lower plasma aldosterone concentration (PAC) levels (<12 ng/dL), patients with PAC levels ≥ 12 ng/dL presented a higher prevalence of thyroid nodules. PA patients had lower thyroid function and higher prevalence of thyroid nodules compared to EH patients. Therefore, the screening of thyroid function and thyroid nodules may be indispensable for PA patients.

An E-nose system for identification and quantification of hazardous gas mixtures using a combined strategy of CNNs and attentional mechanisms

The chemical industry generates a broad spectrum of hazardous gases, presenting significant challenges for conventional detection methods due to their diverse chemical properties and low concentration levels. E-nose systems, employing sensor arrays, offer significant potential for the determination of gas mixtures. This study presents a novel E-nose algorithm, CNN-ECA, which integrated CNNs and attention mechanisms to improve the recognition accuracy of E-nose systems. By integrating the attention mechanism module into CNN’s convolutional operations, the algorithm emphasizes critical feature information. Three hazardous gases (ammonia, methanol, and acetone) and their mixtures were chosen as target gases. CNNs were combined with various attention mechanism networks (SENet, ECA, and CBAM) to construct models, which were then employed to train and evaluate data collected from the sensor array. The results were compared with traditional network models (KNN, SVM, and CNN). Experimental findings indicated that the prediction performance of CNN models combined with attention mechanism networks surpassed that of traditional network models. Particularly, the CNN-ECA network model demonstrated the highest performance in both qualitative and quantitative analyses. This study presents a promising solution for mixed gas detection by synergizing CNN and attention mechanism networks, thereby enhancing the accuracy and reliability of mixed gas measurements. Moreover, capitalizing on the lightweight architecture of the CNN-ECA model, transfer learning techniques were employed to adapt it for deployment on the Raspberry Pi hardware platform. This facilitates the development of a real-time E-nose system for gas detection.

Prediction of saccharides concentration in intact and ground Codonopsis root using near-infrared reflectance spectroscopy

Codonopsis root, a traditional Chinese medicine, produces saccharides that serve as key indicators for assessing its quality. In this study, we employ near-infrared reflectance spectroscopy to predict total polysaccharide concentration as well as the major individual saccharides of intact (surface and cross-section) and ground samples of Codonopsis roots. We developed regression relationships between the spectra and the concentration of fructose, glucose and polysaccharides for the ground spectra set (Rp2 > 0.8, RPD>2.0) based on partial least squares regression (PLSR) model. However, for the intact cross-section spectra set, only the dominant component of the fructose, could be quantitatively detected (Rp2 > 0.8, RPD>2.0). All models based on the intact surface spectra set were of unacceptable performance. This discrepancy could be attributed to the low concentration levels of different saccharides and the distinct chemical profiles reflected by the spectra sets from samples with varying homogeneity. The findings provide an approach for efficient and sustainable analysis for the purposes of quality control and standardization of Codonopsis roots.

Bridging Targeted (Zeno MRM-HR) and Untargeted (SWATH) LC-HRMS in a Single Run for Sensitive Exposomics.

Traditionally, chemical exposure has been assessed by low-resolution mass spectrometry via targeted approaches due to the typically extremely low concentration of such compounds in biological samples. Nevertheless, untargeted approaches are now becoming a promising tool for a broader investigation of the exposome, covering additional compounds, their biotransformation products, and possible metabolic alterations (metabolomics). However, despite broad compound coverage, untargeted metabolomics still underperforms in ultratrace biomonitoring analysis. To overcome these analytical limitations, we present the development of the first combined targeted/untargeted LC-MS method, merging MRM-HR and SWATH experiments in one analytical run, making use of Zeno technology for improved sensitivity. Multiple reaction monitoring transitions were optimized for 135 highly diverse toxicants including mycotoxins, plasticizers, PFAS, personal care products ingredients, and industrial side products as well as potentially beneficial xenobiotics such as phytohormones. As a proof of concept, standard reference materials of human plasma (SRM 1950) and serum (SRM 1958) were analyzed with both Zeno MRM-HR + SWATH and SWATH-only methodologies. Results demonstrated a significant increase in sensitivity represented by the detection of lower concentration levels in spiked SRM materials (mean value: 2.2 and 3 times lower concentrations for SRMs 1950 and 1958, respectively). Overall, the detection frequency was increased by 68% (19 to 32 positive detections) in the MRM-HR + SWATH mode compared to the SWATH-only. This work presents a promising avenue for addressing the outstanding key challenge in the small-molecule omics field: finding a balance between high sensitivity and broad chemical coverage. It was demonstrated for exposomic applications but might be transferred to lipidomics and metabolomics workflows.

A Ternary Diagram Approach to Investigate the Competition within the Bohai Sea Rim Multi-Port Group

The Bohai Rim region constitutes the third prominent “growth pole” in China’s economic landscape, wherein the Bohai Rim multi-port system, encompassing Tianjin Port, Dalian Port, and Qingdao Port, engages in intense competition to establish itself as the foremost shipping hub in northern China. This study compares the ternary diagram method and employs the comprehensive concentration index (CCI), Lerner index (LI), and spatial shift-share analysis (SSSA) methods to delve into the intricacies of concentration, inequality, and evolving competitive dynamics within the Bohai Rim multi-port system over the four decades spanning from 1981 to 2023. The aim is to analyze the evolutionary trajectory and underlying dynamic mechanisms of this multipartite port system. The analysis delineates the development trajectory of the system into three stages: the dominant stage of Tianjin Port from 1981 to 1990, the efficiency competition stage from 1991 to 1996, and the ascendancy of Qingdao Port from 1997 to 2023. The results indicate that: (i) the Bohai Rim multi-port system exhibits a relatively low level of concentration, ensuring balanced growth within a non-monopolistic competitive environment; (ii) the internal competitiveness of the Bohai Rim multi-port system has gradually shifted from Tianjin Port to Qingdao Port, with Dalian Port experiencing steady development in its container transport capabilities. (iii) Dalian Port has witnessed a decline in container throughput since 2015, indicating a weakening competitive posture. These revelations suggest that Qingdao Port is a viable candidate for development into the northern China shipping center, leveraging its increasing competitiveness and strategic location. The method applied in this study may also prove beneficial for similar multi-port systems elsewhere.