Lower Cambrian Qiongzhusi Formation Research Articles

Three-stage hydrocarbon accumulations in the Middle Permian in the Central Sichuan Basin

The Middle Permain Maokou Formation (P2m) is a new region of natural gas exploration in the Sichuan Basin, is characterized by bioclastic limestone with localized dolomitization, and karst fractured-vuggy reservoirs. Currently, on the gas source, hydrocarbon accumulation process and control factors in the Sichuan Basin during the Permian are lacking. To bridge this gap, herein, we identified the filling sequence minerals inside the pores/vugs, along with the oil charge of the Maokou Formation using drill cores, thin sections, oil inclusion analysis, and U-Pb dating of calcite cements. The results showed that the reservoir space of the Maokou Formation was predominated by the residual dissolved pores/vugs, fractures, and dissolved fractures. The pores/vugs underwent four stages of mineral filling by very fine-fine (-crystalline, CC1) calcite → fine-medium calcite (CC2: from 256.4 ± 1.7 to 244.1 ± 6.3 Ma) → fibrous calcite (FC; ∼183.9 ± 8.2 Ma) → coarse-macro calcite (CC3; ∼171.5 ± 5.3 Ma). Combined with the homogenization temperature and salty of fluid inclusion, we considered that three stages of oil charge were present in the Maokou Formation reservoirs. The first stage involved the formation of paleo-oil reservoirs during the Late Permian to Early Triassic, corresponding to the high-maturity aqueous inclusions in CC2, with a homogenization temperature of 106.7°C–137.8°C. At that time, the oil generation from the Lower Cambrian Qiongzhusi Formation rocks peaked, and the generated hydrocarbons migrated upward into the Maokou Formation through the strike-slip faults in the basin center. The second stage involved the formation of paleo-oil reservoirs during the Early Jurassic. The Permian source rocks reached the oil generation window with hydrocarbon expulsion, which was consistent with the oil inclusions in FC. The third stage involved the formation of paleo-gas reservoirs during the Middle Jurassic to Early Cretaceous, corresponding to the high-density methane inclusions and bitumen inclusions occurring in CC3, with the homogenization temperature peaking at 151.9°C–178°C. The natural gas in the Middle Permian of the Central Sichuan Basin is predominantly sourced from the Lower Cambrian Qiongzhusi Formation mudstone and partially from the source rocks of the Middle Permian, indicating a significant source-reservoir conduit of the strike-slip faults in the basin center. The findings provide considerable baseline data to advance further research in the Sichuan Basin.

Characteristics and Controlling Factors of Pores in Different Shale Lithofacies Reservoirs of Lower Cambrian Qiongzhusi Formation, Southwestern Sichuan Basin, China

The shale reservoirs of the Lower Cambrian Qiongzhusi Formation are widely distributed in the Sichuan Basin and have abundant gas resources. However, the shale lithofacies of the Qiongzhusi Formation are complex due to frequent sea level changes. The reservoir pore structure characteristics and gas content of different shale lithofacies vary significantly, which makes identifying the ‘sweet spot’ a challenging task. In this study, core observation and X-ray diffraction (XRD) were used to analyze the lithofacies types and characteristics of the study area. The pore types of different shale lithofacies were observed using field emission-scanning electron microscopy. Pore structures were studied using low-temperature gas (including N2 and CO2) physisorption, and the pore volume (PV), specific surface area (SSA) and pore structure were systematically characterized. The primary factors influencing pore formation in different types of shale lithofacies were analyzed by combining geochemical experiments and mineral contents. The results indicate that the lithofacies of the Qiongzhusi Formation shale in the study area can be classified into five categories according to mineral compositions: Siliceous argillaceous shale (CM-1), Argillaceous siliceous mixed shale (M-2), Argillaceous siliceous shale (S-3), Siliceous rock (S) and Calcareous siliceous shale (S-2). Pores are abundant in S-3 shale, M-2 shale and CM-1 shale. The S-3 shale is more enriched in organic pores and clay mineral pores compared to other lithofacies shales, and the pore morphology is mainly wedge-shaped and plate-like. M-2 shale and CM-1 shale are rich in clay minerals and mainly develop clay mineral pores and are mainly wedge-shaped and plate-like. The S shale and S-2 shale mainly develop interparticle pores and clay mineral pores, which are mainly slit-like. The results show that TOC, pyrite content, quartz and feldspar mineral content, clay mineral type and content affect the pore structure in the study area. Quartz and feldspar content have a negative effect on micropore and mesopore volumes. TOCs have a weak positive correlation with micropore volume and micropore SSA. Clay mineral content has significant positive effects on the PV and SSA of micropores and mesopores, indicating that clay mineral content is the main factor affecting the pore structure of shale.

Geochemical properties, mechanism of formation, and source of solid bitumen in the Ediacaran Dengying Formation from the central to northern Sichuan Basin, China

Several large gas reservoirs, including the Weiyuan and Anyue gas fields, have been discovered in the Ediacaran Dengying Formation in the Sichuan Basin, indicating vast opportunities for deep-petroleum exploration. Understanding the origin and evolution process of these gas reservoirs is crucial for further petroleum exploration and development. Although the burial history of the Sichuan Basin and its surrounding areas is basically dominated by Paleozoic burial and preservation, and Meso-Cenozoic uplift and erosion. However, the source of the Dengying Formation natural gas in the Sichuan Basin is still a subject of controversy between the Ediacaran and Cambrian source rocks due to high thermal maturity, secondary alteration, and multistage tectonic activities. This study aims to examine the investigation on the properties and genetics of Dengying solid bitumens that existed in the central to northern Sichuan Basin, in order to provide insights into the source and evolution history of the Dengying paleo-oil reservoirs. For this purpose, petrologic, elemental, and organic geochemical analyses were used to investigate the properties, origin, and formation mechanism of solid bitumens. The results indicate that these solid bitumens have suffered intense thermal alteration (EqVRo 2.1%–5.3%), and are classified as pyrobitumens. Solid bitumens in the Gaoshiti bulge and the north slope area were subjected to tectonic thermal events (e.g., Emeishan igneous province) and relatively strong thermochemical sulfate reduction (TSR) alteration. These solid bitumens were assumed to be pyrolysis products of light (condensate) oil. In contrast, solid bitumens in the Weiyuan bulge and the Micangshan uplift area were not influenced by tectonic thermal events but experienced weak TSR alteration, and originated from either normal or heavy crude oil. Moreover, a systematic bitumen-source correlation was carried out using δ13Corg values, bound steranes, and trace element distributions. Results reveal that the solid bitumens in the central Sichuan paleo-uplift were mainly derived from the lower Cambrian Maidiping Formation, those in the north slope area originated from the lower Cambrian Qiongzhusi Formation, while those in the Micangshan area were sourced from the Ediacaran Doushantuo Formation. Structural and burial history analysis implies that the differences in the source of the Dengying paleo-oil reservoir (i.e., solid bitumen) between these study areas are attributed to the distribution of source rocks and their contact relationship with reservoirs. This research successfully obtained insights into the source and genetic mechanism of paleo-oil reservoirs by analyzing the properties of high-maturity solid bitumens, which can guide further exploration and development of deep petroleum resources.

Fluid history of the lower Cambrian Longwangmiao Formation in the Anyue gas field (Sichuan Basin, SW China)

The Anyue gas field in China is an important source of natural gas supporting the country energy transition to the goal of carbon-neutrality. However, the fluid P–T history, which will provide a better insight into gas accumulation and probable leakage in the main reservoir (the Lower Cambrian Longwangmiao Formation) has still yet to be fully understood. This study combines detailed petrographic observations with transmitted light, ultraviolet light, reflected light and cold cathodoluminescence, fluid inclusion microthermometry, Raman spectrometry, 1D basin modeling and fluid P–T modeling techniques to reconstruct the fluid-involved basin evolution of the Longwangmiao Formation in the Anyue region. The results showed that the paragenesis of the Longwangmiao Formation includes dolomite matrix, dolomite 1, dolomite 2, dolomite 3 (saddle dolomite), dolomite 4, quartz and calcite. The first generation of bitumen occurs between dolomite 1 and dolomite 2, corresponding to the primary oil generation of the Lower Cambrian Qiongzhusi Formation at the burial maximal in the Silurian. The second generation of bitumen, corresponding to intense oil cracking into gas, has occurred between dolomite 4 and quartz at a geological period between the Middle Jurassic and Early Cretaceous (early Yanshanian movement). Fluid inclusions trapping pressure modeling explains that the trapping pressure increases from dolomite 4 to quartz due to burial and the oil cracking into gas, then stays constant from quartz to calcite due to the sealing of fractures. The open fractures formed after calcite partially reduced the overpressure condition of the Longwangmiao Formation. Collectively, this study will provide necessary information for a better understanding of deeply buried reservoirs to support more efficient development of such reservoirs in higher quality zones and reduce exploration risks and operational costs.

Tracking multiple paleo oil charges in the Precambrian dolomite reservoirs of the central Sichuan Basin, China

In the Precambrian dolomites in the central Sichuan Basin, a substantial paleo-oil system previously existed, which has since evolved into a dry gas system that is currently in place. The genesis of this paleo-oil system remained poorly understood, leaving uncertainties regarding the timing of oil charging and associated source rocks. Integration of Re–Os geochronometry with basin modeling allows temporal-spatial constraints on the ancient petroleum system to be established.Two texturally distinct generations of reservoir bitumen were identified. Late-generation bitumen yielded a geologically meaningful Re–Os age of 189 ± 20 Ma (MSWD = 10.4, 2σ), distinct from the previously documented Re–Os ages such as the 414 ± 44 Ma reported by Shi et al. (2020). This new age, along with the ∼414 Ma, aligns within uncertainties with the two relative timings derived from our independent basin model (ca. 450–390 Ma and 260–180 Ma), revealing two temporally distinct oil generation-migration events. The date of ∼189 Ma also lends support to the previous oil charge timing inferred from fluid inclusions. We evaluated the imprecisions of these two Re–Os ages and considered them to result from a narrow spread in 187Re/188Os, and variations in initial Os isotopic compositions (Osi) due to the giant size of the petroleum system and a long duration of oil generation from source kitchen over a large geographical area in this play. Effects of asphaltene precipitation, due to uplift-induced decompression of the migrating oils, may also have contributed to the scatter. Separating the samples based on Osi produced a higher precision age (184.1 ± 5.7 Ma, Model 1) with an MSWD of 0.97.The first oil charge is relatively weak as shown by the basin model and observed bitumen volumes, and it had not been well preserved due to significant reservoir exhumation by Caledonian tectonism. Consequently, the younger oil charge is considered to be the principal precursor to the current dry gas accumulations. Os isotope histories for four potential source units were constructed using publicly available Re–Os data. Comparisons between bitumen and rock Os compositions tend to support the lower Cambrian Qiongzhusi Formation as the predominant source unit for the two major paleo-oil charges. However, contributions from the Duoshantuo, Dengying, and Maidiping source rocks can not be precluded. Overall, these new observations allow temporal-spatial constraints to be placed on the complex evolution, from paleo-oil generation to destruction and dry gas generation.

Metal elements potential for hydrocarbon–source correlation

Inorganic geochemical approaches (i.e., trace elements) for hydrocarbon–source rock correlations in sedimentary basins are a frontier area of research in petroleum geochemistry. This study used inorganic geochemistry to the over mature petroleum systems in the Sinian (Neoproterozoic) Dengying Formation in the Sichuan Basin of China. Our results show that the BaN–NiN–CuN ternary diagram, VN–NiN–MoN ternary diagram and V/Ni–U/Th diagram (related to paleo-productivity and redox conditions), rare earth element (REE)–Y patterns, Ce/Ce*–La/La* diagram, and Ce/Ce*–La/La*–(LREE/HREE)N ternary diagram (related to fluid interactions) can robustly distinguish different source rocks. In particular, V, Ni, and Mo have a strong relationship to organic matter in source rocks, while their occurrence is most likely related to porphyrins in petroleum. Therefore, the VN–NiN–MoN ternary diagram can be used for hydrocarbon–source rock correlations. In contrast, Ba, Cu, U, Th, and REE–Y have different and complex geochemical behaviors, limiting the application in hydrocarbon–source rock correlations. The application in the Sichuan Basin shows that the hydrocarbons in the Dengying reservoir were mainly derived from the lower Cambrian Qiongzhusi Formation with minor contribution from the lower Cambrian Maidiping and Sinian Doushantuo formations. Compiled data from Lower Paleozoic crude oils in the Tarim Basin show that the VN–NiN–MoN ternary diagram can also be applied to low-maturity crude oil systems. Therefore, V, Ni, and Mo have strong relationship to organic matter in petroleum systems and the potential for hydrocarbon–source correlation, while other elements should be used under given conditions.

Thermal maturity calibration of extremely high-mature pre-Devonian strata: A case study from the Lower Cambrian Qiongzhusi Formation in the Sichuan Basin, South China

Thermal maturity assessment of pre-Devonian strata is challenging due to the absence of humic vitrinite, and conventional organic geochemical methods (i.e., Rock-Eval Tmax, atomic H/C, biomarker parameters) are usually ineffective for the highly-over mature source rocks. The Lower Cambrian Qiongzhusi Formation shale in the Sichuan Basin, as the main high-quality source rock, is an important exploration target for shale gas. In this study, optical reflectance and Raman spectroscopy measurements were performed on eight Qiongzhusi Formation core samples from well JY1 in conjunction with basin modelling to calibrate to equivalent vitrinite reflectance and constrain thermal maturity. The results reveal solid bitumens/pyrobitumens as the predominant organic constituents in the Qiongzhusi Formation. As burial depth increases from 3,300m to 3,600m, the solid bitumen reflectance acquired from optical measurement and Raman calculation increase from 2.53% to 3.86%, and from 2.88% to 3.49%, respectively, along with increasing optical anisotropy. The Raman-calculated solid bitumen reflectance data are consistent with the optical reflectance data at depths <3,500m, while the former become lower than the latter at depths >3,500m and are consistent with reflectance values constrained by basin modelling. We propose that the surface quality and granularity of solid bitumen, hydrothermal fluid alteration, and varied thermal conductivity of mineral matrix result in the higher optical reflectance of solid bitumen occurrence in the Qiongzhusi carbonates. The multidisciplinary calibration approach integrating optical reflectance measurement, Raman spectroscopy and basin thermal modelling is considered effective and more accurate for thermal maturity assessment.

Natural Gas Accumulation and exploration potential of permian Volcanic Rocks in Southwest Sichuan Basin

To figure out gas enrichment laws in Permian volcanic rocks, Sichuan Basin, an association among reservoir-forming elements was explored to analyze forming modes and point out exploration prospects in accordance with reservoir characteristics, gas source conditions, and fault elongation in Zhougongshan and Jianyang areas. Results show that there mostly exist porous volcaniclastic rock and lava reservoirs of explosive facies. In Jianyang with Lower Cambrian Qiongzhusi Formation as the principal source rock, early faults offered pathways to assemble ample initial oil and gas. Following an increase of burial depth, oil started cracking vastly to create oil-cracked gas. These elements constitute one reservoir-forming mode of Cambrian hydrocarbon supply–fault transporting–in-situ cracking in Jianyang. While in Zhougongshan with Lower Permian Maokou 1 Member as the main source, active faults during hydrocarbon generation and expulsion acted on trap preservation. Late kerogen-cracked gas gathered at structural highs far from giant faults. Thus, the other mode exhibited in Zhougongshan is Permian hydrocarbon supply–fault adjustment–effective trap accumulation. Reservoir-forming conditions in volcanic rocks present certain disparity among all kinds of tectonic settings inside the basin, giving rise to various volcanic gas reservoirs developed. The Permian volcanic rocks are expected to be a major domain for reserve and production increase in Sichuan Basin.

Superimposed hydrocarbon accumulation through multi-source and multi-stage evolution in the Cambrian Xixiangchi Group of eastern Sichuan Basin: A case study of the Pingqiao gas-bearing anticline

The Xixiangchi Group in eastern Sichuan Basin has great potential for natural gas exploration. However, there is a lack of in-depth studies of the hydrocarbon sources and the formation and evolution of gas reservoirs in this Group. Systematic investigation about the gas reservoir in Pingqiao anticline was consequently carried out in terms of characteristics of reservoir bitumen, the geochemical characteristics of natural gas, diagenetic minerals, and fluid inclusions. Based on this, combined with the reconstruction of the burial history, thermal evolution history and uplifting history of strata, and analysis of the regional tectonic settings, the hydrocarbon sources were identified and the formation and evolutionary processes of the gas reservoirs in Xixiangchi Group was revealed in this study. It was shown that the gas reservoirs have mixed gas sources from the shale source rocks in the Lower Cambrian Qiongzhusi Formation and in the Upper Ordovician Wufeng Formation-Lower Silurian Longmaxi Formation, and experienced several evolutionary stages, including the paleo-oil reservoir stage from the Late Siliurian to the Middle Permian, the paleo-gas reservoir stage from the Late Permian to the Early Cretaceous, and the superimposed accumulation and mixed-source gas reservoir stage since the Late Cretaceous. The mixed-source gas reservoir is formed by the adjustment of the Xixiangchi Group paleo-gas reservoirs and depressurization of the overpressure Wufeng-Longmaxi shale gas reservoirs and the charging of gas into the Xixiangchi Group reservoir of the Pingqiao anticline since the Late Cretaceous, which show obvious superimposed accumulation characteristics. There are different accumulation patterns in different geological periods. The accumulation pattern of the “old source - young reservoir” (i.e. hydrocarbons generated from older source rocks accumulating in younger reservoirs) dominates before the Late Cretaceous, and that of “juxtaposed young source - old reservoir” (i.e. hydrocarbons generated from younger source rocks accumulating in juxtaposed older reservoirs) dominates after the Early Cretaceous. Moreover, faults acted as critical vertical pathways for hydrocarbon migration during the evolution of the Xixiangchi Group gas reservoirs. This model provides new insights and theoretical basis for evaluation and mapping of the Xixiangchi Group play fairway in eastern Sichuan Basin.

Paleoenvironmental Reconstruction and Organic Matter Accumulation of the Lower Cambrian Qiongzhusi Formation in the Sichuan Basin, South China

Paleoenvironmental Reconstruction and Organic Matter Accumulation of the Lower Cambrian Qiongzhusi Formation in the Sichuan Basin, South China

Comparison of the Ediacaran and Cambrian petroleum systems in the Tianjingshan and the Micangshan uplifts, northern Sichuan Basin, China

Several different types of petroleum occurrences (including solid bitumens, oil sands, and oil seeps) are observed in various strata (e.g., the Ediacaran, Cambrian, Devonian, Permian, Triassic, and Jurassic strata) of the Tianjingshan and the Micangshan uplifts, northern Sichuan Basin, China. However, the sources of these petroleum occurrences are still in dispute, because of the severe biodegradation, strong thermal alteration, and multiple tectonic movements. At present, such uncertainty in the potential source rock systems has hindered oil and gas exploration in the study areas. In this study, methods including catalytic hydropyrolysis and trace elements analysis were introduced into the oil-source correlation study, to avoid the influence of biodegradation and/or thermal alteration. The results show that the petroleum shows that occur in the Cambrian-Jurassic strata of the Tianjingshan area are characterized by low maturity (equivalent vitrinite reflectance (EqVRo) < 1.0%), light organic carbon isotopic ratios (δ13Corg values ranging from −34.0‰ to −38.4‰), a predominance of C29-steranes, enrichment in V and Mo, and strong depletion in Bi elements. In contrast, the solid bitumens in the Ediacaran Dengying Formation in the Micangshan area have high maturity (EqVRo > 2.0%), slightly heavier δ13Corg values ranging from −27.5‰ to −36.0‰, a predominance of C27-steranes, weak enrichment in Mo and strong depletion in Rb and Bi elements. In addition, the Ediacaran and the Lower Cambrian source rocks can be discriminated by the bound sterane distributions, trace element concentrations, and bulk δ13Corg values. Further oil-source correlation indicates that the petroleum shows in the Cambrian-Jurassic strata in the Tianjingshan area were dominantly derived from the Lower Cambrian Qiongzhusi Formation, while those in the Ediacaran Dengying Formation in the Micangshan area were mainly sourced from the Ediacaran Doushantuo Formation. Finally, the results of oil-source correlation, combined with the tectonic evolution history of the investigated areas further elucidate the occurrence and distribution of petroleum, which can assist in oil and gas exploration in the investigated uplifts and the adjacent areas.

Depositional Paleo-Environments of Lower Cambrian Qiongzhusi Formation in the Western Middle Yangtze Block and Its Controlling Effect on the Organic Matter Enrichment

No systematic comparative study has been conducted on the factors controlling organic matter enrichment in the different depositional environments of the Lower Cambrian Qiongzhusi Formation in the western Middle Yangtze Block, leading to a large discrepancy in our understanding. Based on organic geochemical and elemental analyses of core, outcrop, rock, and mineral samples from the slope, deep-water shelf, and shallow-water shelf, in this study, comparative analysis of the organic matter content, sedimentological characteristics, and depositional paleoenvironments of the Lower Cambrian Qiongzhusi Formation in the western Middle Yangtze Block was conducted, and the main controlling factors and models of the organic matter enrichment were investigated. The results revealed that the organic matter enrichment in the Qiongzhusi Formation was jointly controlled by redox conditions, water restriction, upwelling currents, terrigenous inputs, and paleo-productivity, but the main factors controlling the enrichment during the different periods were significantly different. (1) During the deposition of the Qiong 1 Member, the extensional rifting was strong, and the sea level was always high. The low degree of terrigenous dilution and anoxic conditions favored organic matter preservation. In this period, the upwelling currents were the main factor controlling organic matter enrichment. The paleo-productivity decreased as the intensity of the upwelling currents gradually weakened from the slope to the shelf, leading to a decrease in the total organic carbon (TOC) content and thereby a gradual decrease in the biogenic silica content of the shale. (2) During the deposition of the Qiong 2 Member, the extensional rifting weakened, and the sea level continued to drop. The upwelling currents, terrigenous input, and redox conditions were all important factors controlling the organic matter enrichment in the region. From the slope to the shelves, the conditions favorable for organic matter enrichment gradually worsened, and the TOC content gradually decreased, with the lithofacies gradually transitioning from biogenic siliceous shale to clayey shale or clayey-calcareous shale. (3) During the deposition of the Qiong 3 Member, the Yangzi Platform underwent a filling and leveling-up process, and the redox conditions played a major role in controlling the organic matter enrichment. The entire region was dominated by an oxygen-rich environment, and the conditions were no longer favorable for organic matter preservation, leading to a low average TOC content. Overall, the spatial variability of the TOC content was closely associated with changes in the depositional paleoenvironment caused by sea-level changes.

Characteristics and environmental significance of concretions in the Lower Cambrian Qiongzhusi Formation in the Middle–Upper Yangtze region, China

Based on the outcrop and drilling data of the Sichuan Basin and its periphery, this paper reveals the concretion development characteristics of the Lower Cambrian Qiongzhusi Formation and its significance to the environment. Three preliminary conclusions are drawn as follows. (1) The exposure layers and lithofacies characteristics of the concretions in the Qiongzhusi Formation are very different from area to area. In the eastern Sichuan-western Hubei-Hunan & Guizhou and southern Sichuan depression areas, the concretionsare developed in the section of SQ1, and are mainly composed of calcareous siliceous mixed shale facies, siliceous shale facies, dolomitic shale facies and dolomite facies. The clay content is generally less than 25% and is significantly less than the surrounding rocks, and the TOC is generally higher in the lower concretion layers and less in the upper concretion layers. In the central Sichuan and northern Sichuan depression areas, the concretions appear in the sections of SQ1 and SQ2, and are dominated by calcareous shale facies and marl facies. The calcic content is obviously higher than that of surrounding rocks, and the clay content is less than that of surrounding rocks, and the TOC is less than 1.50%. Because mineral composition difference is high, most of the GR curves of the concretions show trough response characteristics, reflecting the central region enriched with calcium or siliceous, and the edge enriched with clay and organic matter. (2) The concretion layers generally occur in carbonaceous shale, silty shale and siliceous shale with a TOC over 0.7%, and are especially developed in carbonaceous shale and siliceous shale of SQ1, and occasionally appear in grey silty shale with a TOC over 0.2%, showing that the concretion layers are basically symbiotic with grey shale (especially with high-quality shale). (3) The concretions are a kind of important sedimentary response of rifting activities in Yangtze marine basin. According to the distribution characteristics of concretions and black shale in the Qiongzhusi Formation, the rifting activities of Yangtze marine basin can be divided into three periods including development period (SQ1), adjustment period (SQ2) and abortion period (SQ3). In the period of SQ1, controlled by massive rifting and upwelling ocean currents in Yangtze marine basin, the concretions and organic-rich shale were widely developed in the Lower Qiongzhusi Formation. In the periods of SQ2 and SQ3, while rifting activity of Yangtze marine basin decreased and aborted, and while sea level fell and upwelling ocean currents receded to the southeast, the concretions and organic-rich shale just appeared in the local depression areas in small scale.

Geochemical characteristics of the lower Cambrian Qiongzhusi Formation in Huize area, east Yunnan: implications for paleo-ocean environment and the origin of black rock series

Geochemical characteristics of the lower Cambrian Qiongzhusi Formation in Huize area, east Yunnan: implications for paleo-ocean environment and the origin of black rock series

The geochemical characteristics, distribution of marine source rocks and gas exploration potential in the northwestern Sichuan Basin, China

In recent years, the northwestern part of the Sichuan Basin has become a popular location for natural gas exploration. However, up to this point, the geochemical characteristics and distribution of marine source rocks in this area have not been thoroughly investigated. In the northwestern Sichuan Basin, there are eight sets of marine source rock, including the Lower Sinian Doushantuo Formation, the third Member of Upper Sinian Dengying Formation, the Lower Cambrian Qiongzhusi Formation, the Lower Silurian Longmaxi Formation, the Middle Devonian, the Middle Permian Maokou Formation, the Upper Permian Longtan Formation/Wujiaping Formation, and the Upper Permian Dalong Formation, from which eight outcrop profiles were selected for systematic organic geochemical analysis. The Qiongzhusi Formation has the thickest high-quality source rocks, up to 80 m thick, followed by the Upper Permian Longtan/Wujiaping and Dalong formations, which have up to 20–30 m thick high-quality source rocks, whereas the thickness in other layers is relatively thin. By the abundance of organic matter, the Doushantuo, Qiongzhusi, Longmaxi, Longtan/Wujiaping, and Dalong formations developed high-quality source rocks with total organic carbon content (TOC) greater than 3%, while the third Member of Upper Sinian Dengying Formation, Middle Devonian and Maokou formations had low TOC. The kerogen of source rocks gradually enriched 13C from the type Ⅰ organic matter of the Lower Cambrian Qiongzhusi Formation to the Upper Permian Dalong Formation, and the δ13C values of Doushantuo Formation, the third Member of Dengying Formation, and Qiongzhusi Formation are less than −30.0‰. The δ13C values of Longtan Formation or Wujiaping Formation and Dalong Formation with type Ⅱ2 organic matter ranges from −28.0‰ and −26.0‰. Others lie somewhere in between type I and type II2. Except for Permian source rocks in Guangyuan and Chaotian areas, which are in the mature stage, source rocks in the northwestern Sichuan Basin are in the over-mature stage and largely in the thermal stage of dry gas. High abundance source rocks have provided rich marine natural gas resources. As a result, future gas exploration in the northwestern Sichuan Basin will focus on the gas-bearing system associated with the Qiongzhusi Formation and Upper Permian source rocks.

Permian geothermal units in the Sichuan Basin: Implications for the thermal effect of the Emeishan mantle plume

The Emeishan mantle plume is supposed to play an important role in the Permian thermal regime and source rock hydrocarbon generation evolution in the Sichuan Basin, Southwest China. In this paper, we provide new valuable insights into the spatial thermal effect of the Emeishan mantle plume to the Sichuan basin and maturity evolution of the Paleozoic source rocks. Cambrian core samples from four wells were selected for zircon fission track and zircon (U–Th)/He analysis in order to determine their thermal histories. Then the thermal histories of typical wells throughout the basin were obtained based on the above result and previous studies. According to the peak heat flow value (q), four Permian geothermal units were classified: a stratospheric heat flow unit (q ≥ 90 mW/m2), a high heat flow unit (80 ≤ q < 90 mW/m2), a medium heat flow unit (70 ≤ q < 80 mW/m2), and a normal heat flow unit (q < 70 mW/m2). The interpretation of the abnormal Permian heat flow indicates that the enormous heat flow anomalies with values of >20 mW/m2 occurred in the stratospheric and high heat flow units was mainly caused by the mantle plume, while the weak Permian thermal perturbation with heat flow anomalies of <15 mW/m2 in other two units was more likely associated with crustal thinning. The thermal effect of the Emeishan mantle plume may be contained within the stratospheric and high heat flow units. By comparing the maturation histories of the Paleozoic source rock, we identified the thermal effect on the maturity evolution. The thermal perturbation had no obvious impact on the maturity evolution of the Lower Permian and Lower Silurian Longmaxi Formation. Only the Lower Cambrian Qiongzhusi Formation within high geothermal unit suffered significant thermal effect of the mantle plume and matured rapidly during the end of the Early Permian.

Maturity evolution of Lower Cambrian Qiongzhusi Formation shale of the Sichuan Basin

The Lower Cambrian Qiongzhusi Formation source rock is one of the main sources of oil and gas in the Sichuan Basin. Owing to the controversial thermal history and the complex structural pattern in the Sichuan Basin, it is difficult to characterize the differences in maturity evolution and the timing of hydrocarbon generation periods of Qiongzhusi hydrocarbon source rocks in different tectonic zones. Based on the comprehensive analysis of the previous thermal history and denudation studies from the tectonic units of the basin, the thermal histories and denudation amount in main period of tectonic movement of a five-part tectonic development are obtained in this paper. Although the thermal history of different tectonic units varies, generally, the heat flow increased slowly in the early Paleozoic, and it experienced a peak heat flow at the end of the Middle Permian and decreased subsequently. Based on new thermal history and denudation data, the maturation of the Lower Cambrian Qiongzhusi Formation source rocks in the Sichuan Basin were modeled and their evolution can be classified into three patterns, which are: (1) continuous heating pattern in southern Sichuan, (2) Silurian-Permian heating cessation pattern in western Sichuan and northwest central Sichuan, and (3) Silurian-Permian and Triassic heating cessation pattern in the central uplift, northern structural zone and western part of the eastern structural zone. In addition, the key hydrocarbon generation periods of different tectonic units were determined in this study. Tectonic and sedimentary burial, together with high heat flow values during the Late Permian, were the main factors controlling levels of thermal maturity and thermal evolution models of the Qiongzhusi Formation. The present-day thermal maturity of the Qiongzhusi Formation depends on the thermal history and maximum burial depth before uplift in Late Cretaceous. However, the maturity evolution pattern affecting the key hydrocarbon generation stage was mainly related to the burial histories of source rocks in the Paleozoic. The thermal modelling of this study provides new evidence for the source rock evolution and new insight into Lower Paleozoic shale gas.

Geochemistry of the black rock series of lower Cambrian Qiongzhusi Formation, SW Yangtze Block, China: Reconstruction of sedimentary and tectonic environments

Abstract The black rock series in the Qiongzhusi Formation contains important geochemical information about the early Cambrian tectonic and ecological environment of the southwestern Yangtze Block. In this paper, major, trace, and rare earth element data are presented in an attempt to reveal the sediment source during the deposition of the early Cambrian Qiongzhusi Formation and to reconstruct the sedimentary tectonic environment and weathering intensity during that time. The basin primarily received continental clastic material with neutral-acidic igneous rocks from a stable source and with a moderate level of maturity during the depositional period of the Qiongzhusi Formation. Furthermore, the strata were weakly influenced by submarine hydrothermal fluids during diagenesis. The reconstruction of the sedimentary environment and weathering intensity shows that P2O5 enrichment and water body stratification occurred due to the effects of upwelling ocean currents during the depositional period of the Qiongzhusi Formation. The combination of upwelling and bottom-water hydrothermal fluids led to environmental changes in the study area, from dry and hot to moist and warm. Last, the reconstruction of the tectonic environment of the Qiongzhusi Formation indicates that deposition occurred in continental slope and marginal marine environments associated with a continental arc tectonic system. These findings provide an essential basis for the comprehensive reconstruction of the early Cambrian sedimentary environment of the Yangtze Block.

Hydrocarbon evolution of the over-mature Sinian Dengying reservoir of the Neoproterozoic Sichuan Basin, China: Insights from Re–Os geochronology

Rhenium–osmium (Re–Os) geochronology is a robust technique for constraining the accurate timing of hydrocarbon evolution, but its effectiveness in over-mature petroleum systems has not been well constrained. Here we conduct a case study in the Neoproterozoic Sichuan Basin, China, i.e., the Sinian Dengying sequence (635–542 Ma). Re–Os isotopic data from this highly mature hydrocarbon reservoir yield a Re–Os isochron ages of 414 ± 44 Ma with an initial 187Os/188Os (Osi) of 1.36 ± 0.19 for bitumen and a 78 ± 37 Ma age with an Osi of 3.21 ± 0.17 for pyrobitumen. Coupled with thermal evolution of possible source rocks and fluid-inclusion homogenization temperatures, the 414 Ma age marks the timing of oil generation, and the 78 Ma age indicates the timing of gas generation associated with the thermal cracking of oil, and the formation of pyrobitumen in the reservoir. A comparison of the Osi of the 414 Ma bitumen and that of possible source rocks at the time of bitumen formation reveal that it was primarily sourced from shale of the lower Cambrian Qiongzhusi Formation. The results of this study provide new insights to better understand the over-mature oil–gas system in the Sinian Sichuan Basin, and show that Dengying Formation reservoirs in the depocenter areas of the basin are potentially favorable for oil and gas exploration. The results further highlight the utility of the Re–Os geochronometer to constrain the accurate age and source of hydrocarbon evolution.

The characteristics and developmental control factors of microscopic pore structure in shale gas reservoirs in the Lower Cambrian Qiongzhusi Formation

The Early Cambrian Qiongzhusi Formation on the southern margin of the Sichuan Basin (Southern China) has experienced a long geological process. High degree of thermal evolution of the organic matter shows a great impact on the organic evolution, reservoir microscopic pore types and structure characteristics in this formation. In this study, we investigate the major types and structural features of microscopic pores in shale gas reservoirs of the Qiongzhusi FM. Different types of matrix pores are found, over-mature shale gas reservoirs in the Qiongzhusi FM. mainly have well-developed micropores, but their average specific surface area (SSA) and pore volume are smaller than those in the Longmaxi Formation. The degree of thermal evolution poses the greatest impact on microscopic pore structure, which is significantly positively correlated with SSA and pore volume; however, when exceeding this range, SSA and pore volume both drastically decrease with increasing degree of thermal evolution. Compared with those in the Longmaxi FM., microscopic pores of shale gas reservoirs in the Qiongzhusi FM. feature pore- SSA and large surface porosity. The better the development of micropores, the larger the SSA and Vp of shales, which are more conducive to shale gas adsorption and accumulation.