Low Template Concentrations Research Articles

Leveraging Active Learning to Establish Efficient In Vitro Transcription and Translation from Bacterial Chromosomal DNA.

Gene expression is a fundamental aspect in the construction of a minimal synthetic cell, and the use of chromosomes will be crucial for the integration and regulation of complex modules. Expression from chromosomes in vitro transcription and translation (IVTT) systems presents limitations, as their large size and low concentration make them far less suitable for standard IVTT reactions. Here, we addressed these challenges by optimizing lysate-based IVTT systems at low template concentrations. We then applied an active learning tool to adapt IVTT to chromosomes as template DNA. Further insights into the dynamic data set led us to adjust the previous protocol for chromosome isolation and revealed unforeseen trends pointing at limiting transcription kinetics in our system. The resulting IVTT conditions allowed a high template DNA efficiency for the chromosomes. In conclusion, our system shows a protein-to-chromosome ratio that moves closer to in vivo biology and represents an advancement toward chromosome-based synthetic cells.

Effect of target gene sequence evenness and dominance on real-time PCR quantification of artificial sulfate-reducing microbial communities.

Quantitative real-time PCR of phylogenetic and functional marker genes is among the most commonly used techniques to quantify the abundance of microbial taxa in environmental samples. However, in most environmental applications, the approach is a rough assessment of population abundance rather than an exact absolute quantification method because of PCR-based estimation biases caused by multiple factors. Previous studies on these technical issues have focused on primer or template sequence features or PCR reaction conditions. However, how target gene sequence characteristics (e.g., evenness and dominance) in environmental samples affect qPCR quantifications has not been well studied. Here, we compared three primer sets targeting the beta subunit of the dissimilatory sulfite reductase (dsrB) to investigate qPCR quantification performance under different target gene sequence evenness and dominance conditions using artificial gBlock template mixtures designed accordingly. Our results suggested that the qPCR quantification performance of all tested primer sets was determined by the comprehensive effect of the target gene sequence evenness and dominance in environmental samples. Generally, highly degenerate primer sets have equivalent or better qPCR quantification results than a more target-specific primer set. Low template concentration in this study (~105 copies/L) will exaggerate the qPCR quantification results difference among tested primer sets. Improvements to the accuracy and reproducibility of qPCR assays for gene copy number quantification in environmental microbiology and microbial ecology studies should be based on prior knowledge of target gene sequence information acquired by metagenomic analysis or other approaches, careful selection of primer sets, and proper reaction conditions optimization.

Accurate quantification of DNA using on-site PCR (osPCR) by characterizing DNA amplification at single-molecule resolution.

Despite the need in various applications, accurate quantification of nucleic acids still remains a challenge. The widely-used qPCR has reduced accuracy at ultralow template concentration and is susceptible to nonspecific amplifications. The more recently developed dPCR is costly and cannot handle high-concentration samples. We combine the strengths of qPCR and dPCR by performing PCR in silicon-based microfluidic chips and demonstrate high quantification accuracy in a large concentration range. Importantly, at low template concentration, we observe on-site PCR (osPCR), where only certain sites of the channel show amplification. The sites have almost identical ct values, showing osPCR is a quasi-single molecule phenomenon. Using osPCR, we can measure both the ct values and the absolute concentration of templates in the same reaction. Additionally, osPCR enables identification of each template molecule, allowing removal of nonspecific amplification during quantification and greatly improving quantification accuracy. We develop sectioning algorithm that improves the signal amplitude and demonstrate improved detection of COVID in patient samples.

Development of Specific DNA Barcodes for the Dinophyceae Family Kareniaceae and Their Application in the South China Sea

Species from the family Kareniaceae (Dinophyceae) frequently cause harmful algal blooms (HABs), with serious ecological impacts and risks to human safety and aquaculture activities in coastal waters worldwide. However, due to their small size, lack of morphological divergence, and low abundance during non-bloom periods, the diversity within this family is not well understood. By comparing the commonly used molecular markers, the Internal Transcribed Spacer (ITS) region was found to have an appropriate mutation rate to distinguish three of the most common genera (Karenia, Karlodinium, and Takayama) within the Kareniaceae family and different geographical strains of Kareniaceae. Specific primers targeting the ITS region of Karenia, and the other primers specific to the genera Karlodinium and Takayama, were designed. Specificity of the primers was tested using 17 strains of Kareniaceae species and 15 non-target species. Representative Kareniaceae species could be successfully detected even at low concentrations of target DNA template with a limit of detection of 3.2 pg. The primers were also assessed using high-throughput sequencing with two environmental samples from the South China Sea (SCS). Analysis of the reads identified as Kareniaceae species revealed a high diversity and the existence of unreported Kareniaceae species in the SCS. In conclusion, the newly developed molecular barcodes specifically detected Kareniaceae species in the field and will provide technical support for the effective warning and monitoring of Kareniaceae HABs.

Anion Exchange Affinity-Based Controllable Surface Imprinting Synthesis of Ultrathin Imprinted Films for Protein Recognition.

Anion exchange affinity-based controllable surface imprinting is an effective approach to overcome low imprinting efficiency and high non-specific binding capacity. The template proteins were first immobilized on the anchored tetraalkylammonium groups of the nanoparticles via anion exchange affinity-based interactions, enabling monolayer sorption using a low template concentration. The combined use of surface-initiated photoiniferter-mediated polymerization to precisely control the imprinted film thickness, allowing the formation of homogeneous binding cavities, and the construction of effective binding sites resulted in a low non-specific binding capacity and high imprinting efficiency. The obtained imprinted films benefited from the anion exchange mechanism, exhibiting a higher imprinting factor and faster binding rate than the reference material. Binding tests revealed that the binding strength and selective recognition properties could be tuned to a certain extent by adjusting the NaCl concentration. Additionally, in contrast to the harsh template elution conditions of the covalent immobilization approach, over 80% of the template molecules were readily removed from the imprinted films using supersonic elution with an aqueous mixture of NaCl and HAc. Introducing template immobilization by anion exchange interactions to the synthesis of imprinted materials may provide a new approach for effective biomacromolecular imprinting.

Haplotype-level DNA metabarcoding from freshwater macroinvertebrate community samples

DNA metabarcoding is a robust method for environmental impact assessments of freshwater ecosystems that enables the simultaneous multi-species identification of complex mixed community samples from different origins using extracellular and total genomic DNA. The development and evaluation of DNA metabarcoding protocols for haplotype level resolution require attention, specifically for basic population genetic applications, i.e., analysis to allow genetic diversity estimations and dispersal abilities of the species present in the bulk community samples. Various literature has proposed using DNA metabarcoding for population genetics, and few studies have provided preliminary applications and proof of concepts that always refer to particular taxa. However, further exploration and assessment of the laboratory and bioinformatics strategies are required to unlock the potential of metabarcoding-based population-level ecological assessments. Here, we assessed the ability to infer haplotype information of freshwater macroinvertebrate species from DNA metabarcoding community sequence. Using mock samples with known Sanger-sequenced haplotypes, we also assayed the effects of PCR cycle for the detection and reduction of spurious haplotypes obtained from DNA metabarcoding. We tested our haplotyping strategy on a mock sample containing 20 specimens from four species with known haplotypes based on the 658-bp Folmer region of the mitochondrial cytochrome c oxidase (mtCOI) gene. The read processing and denoising-step resulted in 14 zero-radius operational taxonomic units (ZOTUs) of 421-bp length, with 12 ZOTUs having 100% match with 12 of the mock haplotype sequences. The remaining eight haplotypes that were not detected from the DNA metabarcoding dataset were all the A. decemseta samples (0.01, 0.05, 0.10 ng/μL DNA template concentrations), two E. bulba (0.01 and 0.05 ng/μL), E. latifolium (0.01 ng/μL), and two K. tibialis (0.01 and 0.10 ng/μL). Given that most of the undetected samples had low concentrations, we report the influence of initial DNA template concentration on the amplification from a mock community sample. Our observation is in accordance with previous studies that reported that samples or taxa with low DNA template concentrations have lower detection probability. Accordingly, abundant taxa or samples with high biomass tend to have higher detection probabilities than those rare, smaller or have low biomass from mixed-community samples. The difference in biomass affects haplotypes' detection since most of the large specimens would be retained after read processing. Hence, these factors need to be addressed when metabarcoding-based haplotyping is to be used to infer abundance-based analysis for population genetics applications. The phylogenetic-based analysis (Fig. 1) revealed that the two ZOTUs without taxonomic matches clustered with one of the species from the mock sample. This supports our observation that only the samples with low concentration were unrepresented from the DNA metabarcoding data. Although we still reported false positive detections because two of the 14 ZOTUs failed to have a 100% match with the mock reference sequences, we could at least identify them as A. decemseta sequences based on the phylogenetic approach. Quality passing reads relatively increased with increasing cycle number, and the relative abundance of each ZOTUs was consistent for each cycle number. This suggests that increasing the cycle number, from 24 to 64, did not affect the relative abundance of quality passing filter reads. Our study demonstrated that DNA metabarcoding data could be used to infer intraspecific variability, showing promise for possible applications in population-based genetic studies. As DNA metabarcoding becomes more established and laboratory protocols and bioinformatics pipelines are continuously being developed, our proof of concept study demonstrated that the method could be used to infer intraspecific variability, showing promise for possible applications on population-based genetic studies.

An inter-laboratory study of DNA-based identity, parentage and species testing in animal forensic genetics

The probative value of animal forensic genetic evidence relies on laboratory accuracy and reliability. Inter-laboratory comparisons allow laboratories to evaluate their performance on specific tests and analyses and to continue to monitor their output. The International Society for Animal Genetics (ISAG) administered animal forensic comparison tests (AFCTs) in 2016 and 2018 to assess the limitations and capabilities of laboratories offering forensic identification, parentage and species determination services. The AFCTs revealed that analyses of low DNA template concentrations (≤300 pg/µL) constitute a significant challenge that has prevented many laboratories from reporting correct identification and parentage results. Moreover, a lack of familiarity with species testing protocols, interpretation guidelines and representative databases prevented over a quarter of the participating laboratories from submitting correct species determination results. Several laboratories showed improvement in their genotyping accuracy over time. However, the use of forensically validated standards, such as a standard forensic short tandem repeat (STR) kit, preferably with an allelic ladder, and stricter guidelines for STR typing, may have prevented some common issues from occurring, such as genotyping inaccuracies, missing data, elevated stutter products and loading errors. The AFCTs underscore the importance of conducting routine forensic comparison tests to allow laboratories to compare results from each other. Laboratories should keep improving their scientific and technical capabilities and continuously evaluate their personnel’s proficiency in critical techniques such as low copy number (LCN) analysis and species testing. Although this is the first time that the ISAG has conducted comparison tests for forensic testing, findings from these AFCTs may serve as the foundation for continuous improvements of the overall quality of animal forensic genetic testing.

Impaired host response and the presence of Acinetobacter baumannii in the serum microbiome of type-II diabetic patients.

SummaryType II diabetes (T2D) affects over 10% of the US population and is a growing disease worldwide that manifests with numerous comorbidities and defects in inflammation. This dysbiotic host response allows for infection of the host by numerous microorganisms. In the course of T2D disease, individuals can develop chronic infections including foot ulcers and periodontitis, which lead to further complications and opportunistic infections in multiple body sites. In this study, we investigated the serum of healthy subjects and patients with T2D with (T2DP) or without periodontitis for both microbiome signatures in addition to cytokine profiles. Surprisingly, we detected the presence of Acinetobacter baumanii in the serum of 23% individuals with T2D/T2DP tested. In T2DP, IL-1β, TNF-α, MCP-1, IL-6, IL-8, and IFN-γ were significantly elevated in ABC-positive subjects. As an emerging pathogen, A. baumanii infection represents a risk for impaired inflammation and the development of comorbidities in subjects with T2D.

Bioluminescent detection of isothermal DNA amplification in microfluidic generated droplets and artificial cells

Microfluidic droplet generation affords precise, low volume, high throughput opportunities for molecular diagnostics. Isothermal DNA amplification with bioluminescent detection is a fast, low-cost, highly specific molecular diagnostic technique that is triggerable by temperature. Combining loop-mediated isothermal nucleic acid amplification (LAMP) and bioluminescent assay in real time (BART), with droplet microfluidics, should enable high-throughput, low copy, sequence-specific DNA detection by simple light emission. Stable, uniform LAMP–BART droplets are generated with low cost equipment. The composition and scale of these droplets are controllable and the bioluminescent output during DNA amplification can be imaged and quantified. Furthermore these droplets are readily incorporated into encapsulated droplet interface bilayers (eDIBs), or artificial cells, and the bioluminescence tracked in real time for accurate quantification off chip. Microfluidic LAMP–BART droplets with high stability and uniformity of scale coupled with high throughput and low cost generation are suited to digital DNA quantification at low template concentrations and volumes, where multiple measurement partitions are required. The triggerable reaction in the core of eDIBs can be used to study the interrelationship of the droplets with the environment and also used for more complex chemical processing via a self-contained network of droplets, paving the way for smart soft-matter diagnostics.

One-Step Duplex Droplet Digital PCR for WT1 Overexpression

With the improvement of treatment methods in acute hematology malignancies, the development of sensitive tools for minimal residual disease assessment has become a priority. The monitoring of WT1 expression level by real-time quantitative PCR has been a standard for minimal residual disease evaluation in acute myeloid leukemia and, since 2009, has been optimized through a European LeukemiaNet effort in an established protocol with well-defined clinical end points. Building on the work of the European LeukemiaNet, this article reports the development of a novel, one-step duplex WT1/ABL1 droplet digital assay for WT1 overexpression detection. This assay provides accurate data with high precision and linearity, even at low-template concentration, while retaining strong correlation with the standardized method and therefore maintaining the framework to analyze the results in the context of acute myeloid leukemia patients.

Environmental DNA (eDNA) Assays for Invasive Populations of Black Carp in North America

AbstractThe Black Carp Mylopharyngodon piceus is an increasingly widespread invasive species in North America that threatens freshwater mussel populations. We developed four qPCR assays for detecting environmental DNA (eDNA) from these Black Carp populations. Assays were designed to target four mitochondrial DNA loci and were based on 34 complete mitochondrial genome sequences, including 29 generated in this study from samples obtained in three countries. Assays were validated for taxon specificity with in silico comparisons against archived DNA sequences and with in vitro tests of 41 DNA samples from Black Carp, as well as DNA samples from 30 nontarget fish species, all from the Mississippi River basin. All four assays were able to detect the DNA of all Black Carp samples and did not exhibit any positive results with DNA from other tested species. Tests conducted in round‐robin fashion among three different laboratories found that all four assays were able to detect DNA at very low template concentrations (limits of detection = 3 copies/qPCR, limits of quantification = 16–64 copies/qPCR) and, as part of in situ validation, were successful in detecting eDNA from Black Carp in aquaculture ponds. Despite some challenges with other attempts at in situ validation, the assays were also effective in detecting Black Carp eDNA in water samples from a drainage ditch in the upper reaches of the species’ range that was known to contain juvenile Black Carp, as well as in water samples from the Mississippi River and a connected oxbow lake in the lower reaches of the species’ range.

Non‐specific amplification compromises environmental DNA metabarcoding with COI

Abstract Metabarcoding extra‐organismal DNA from environmental samples is now a key technique in aquatic biomonitoring and ecosystem health assessment. Of critical consideration when designing experiments, and especially so when developing community standards and legislative frameworks, is the choice of genetic marker and primer set. Mitochondrial cytochrome c oxidase subunit I (COI), the standard DNA barcode marker for animals, with its extensive reference library, taxonomic discriminatory power and predictable sequence variation, is the natural choice for many metabarcoding applications. However, for targeting specific taxonomic groups in environmental samples, the utility of COI has yet to be fully scrutinized. Here, by using a case study of marine and freshwater fishes from the British Isles, we quantify the in silico performance of twelve primer pairs from four mitochondrial loci – COI, cytochrome b, 12S and 16S – in terms of reference library coverage, taxonomic discriminatory power and primer universality. We subsequently test in vitro four primer pairs – three COI and one 12S – for their specificity, reproducibility, and congruence with independent datasets derived from traditional survey methods at five estuarine and coastal sites around the English Channel and North Sea. Our results show that for aqueous extra‐organismal DNA at low template concentrations, both metazoan‐targeted and fish‐targeted COI primers perform poorly in comparison to 12S, exhibiting low levels of reproducibility due to non‐specific amplification of prokaryotic and non‐target eukaryotic DNAs. An ideal metabarcode would have an extensive reference library upon which custom primers could be designed, either for broad assessments of biodiversity, or taxon specific surveys. Such a database is available for COI, but low primer specificity hinders practical application, while conversely, 12S primers offer high specificity, but lack adequate references. The latter, however, can be mitigated by expanding the concept of DNA barcodes to include whole mitochondrial genomes generated by genome‐skimming existing tissue collections.

Study of the influence of the template concentration under homogeneous precepitation on the properties of Ni(OH)2 for supercapacitors

Nickel hydroxide is widely used as an active material for hybrid supercapacitors. The most electrochemically active is a-Ni(OH) 2 , synthesized using template homogeneous precipitation. In order to achieve maximum characteristics, it was necessary to study the influence of the template concentration on structural, surface and electrochemical properties of Ni(OH) 2 samples. For this purpose, Ni(OH) 2 samples were prepared using template homogeneous precipitation, with Culminal C8564 (template) concentrations of 0 %, 0.5 %, 1 %, 2 %, 3 % and 4 %. Structural properties of the samples were studied by means of X-ray diffraction analysis, size and particle morphology – by means of Scanning Electron Microscopy, the electrochemical characteristic – galvanostatic charge-discharge cycling in the supercapacitor regime. It has been demonstrated that an increase of the template concentration to 0.2 % leads to a decrease of crystallinity and particle size. However, a further decrease of concentration leads to increase of crystallinity and aggregation of nickel hydroxide particles. The influence of the template concentration on the electrochemical properties is different for different concentration ranges. At low template concentrations (below 0.2 %), the specific capacity of the samples is almost independent of cycling current density. The optimal concentration for this range is 0.1 %, with the maximum specific capacity of 499 F/g. Nickel hydroxide prepared with 0.1 % of Culminal C8564, is recommended for use at low and medium current densities (below 80 mA/cm 2 ). At high template concentrations (0.3–0.5 %), the specific capacity increases significantly with an increase of current density. The optimal concentration for the ranges was 0.4 %, with the maximum specific capacity of 525 F/g. Nickel hydroxide samples prepared with 0.4 % of Culminal C8564, is recommended for use in high-speed supercapacitors with high discharge current densities (120 mA/cm 2 and above).

Electrosynthesized molecularly imprinted polyscopoletin nanofilms for human serum albumin detection

Molecularly imprinted polymers (MIPs) rendered selective solely by the imprinting with protein templates lacking of distinctive properties to facilitate strong target-MIP interaction are likely to exhibit medium to low template binding affinities. While this prohibits the use of such MIPs for applications requiring the assessment of very low template concentrations, their implementation for the quantification of high-abundance proteins seems to have a clear niche in the analytical practice. We investigated this opportunity by developing a polyscopoletin-based MIP nanofilm for the electrochemical determination of elevated human serum albumin (HSA) in urine. As reference for a low abundance protein ferritin-MIPs were also prepared by the same procedure. Under optimal conditions, the imprinted sensors gave a linear response to HSA in the concentration range of 20–100 mg/dm3, and to ferritin in the range of 120–360 mg/dm3. While as expected the obtained limit of detection was not sufficient to determine endogenous ferritin in plasma, the HSA-sensor was successfully employed to analyse urine samples of patients with albuminuria. The results suggest that MIP-based sensors may be applicable for quantifying high abundance proteins in a clinical setting.

Optimizing gDNA extraction from fresh frozen meningioma tissue for downstream genetic analysis

ObjectiveMeningioma is the most common brain tumor. Genetic mutations in meningioma that include deletion of the neurofibromatosis type 2 gene, (NF2), offer diagnostic information on tumor behavior, recurrence and potential response to treatment. Obtaining high-grade genetic material is critical for accurate, sensitive and robust molecular testing. Currently, no standardized procedure exists for extracting gDNA from meningioma, and this problem was addressed in this report. MethodThis study compared the yield and quality of extracted gDNA from patient meningioma specimens using an optimized phenol chloroform method and two commercial silica column-based extractions kits and tested respective performances as template in qPCR tests and multiplex ligation-dependent probe amplification (MLPA) NF2 screening. ResultsMean gDNA yields were comparable for each method tested; however, phenol chloroform extraction outperformed column-based kits in all other quality assurance metrics examined. Phenol chloroform extracted gDNA was highly pure, and of a higher fragment size species when compared to column prepared gDNA. qPCR of GAPDH, B2MG, and RPL37A housekeeping genes demonstrated variance in cycle thresholds between patient samples was much lower in the phenol chloroform group. Similarly, primer efficiencies were significantly improved in this sample group which translated to a broader qPCR linear dynamic range and much improved qPCR performance at low concentrations of template. MLPA screening identified NF2 gene deletions in 6 of 12 meningioma samples. Inconsistencies in copy number data for NF2 and reference regions of the genome were observed between gDNA sample extraction groups that included both false negative and positive errors in silica column derived gDNA samples. ConclusionsThis study outlines a highly robust phenol chloroform extraction method for obtaining high-quality gDNA from frozen meningioma tissue and highlights the significance of performing adequate quality assurance when using gDNA for downstream genetic analysis. Most importantly, we demonstrate using gDNA extracted with silica column based kits can lead to diagnostic errors when screening NF2 deletions in meningiomas with MLPA.

Enzymological description of multitemplate PCR—Shrinking amplification bias by optimizing the polymerase–template ratio

Multitemplate polymerase chain reaction (PCR) is used for preparative and analytical applications in diagnostics and research. Classical PCR and qPCR are two basic setups with many possible experimental modifications. Classical PCR is a method of choice to obtain enough material for subsequent sophisticated applications such as construction of libraries for next-generation sequencing or high-throughput screening. Sequencing and Single Nucleotide Primer Extension (SNuPE) employ one-strand synthesis and represent a distinct variant of analytical DNA synthesis.In all these applications, maintaining the initial ratio of templates and avoiding underestimation of minority templates is desired.Here, we demonstrate that different templates can amplify independently at low template concentrations (typical in qPCR setups, in which the polymerase concentration is usually several orders of magnitude higher than the template concentration). However, rare templates can be diluted in an effort to keep DNA amplification in the exponential phase, or template concentration can be biased by differences in amplification efficiency. Moreover, amplification of templates present in low concentrations is more vulnerable to stochastic events that lead to proportional changes in the product ratio, as well as by incomplete amplification leading to chimera formation. These undesired effects can be compensated for by using highly processive polymerases with high and equal affinity to different primer–template complexes. Novel enhanced polymerases are desired.With increasing concentration of a primer–template of interest, the system becomes more deterministic.Nevertheless, marked deviation from independent exponential amplification occurs when the total template concentration starts to approach the polymerase concentration. The primer–template complexes compete for enzyme molecules, and the amount of products grows arithmetically—the system starts to obey Michaelis–Menten kinetics. Synthesis of rare products in a multitemplate mixture can run more easily under the detection limit in such conditions, although it would be unequivocally detectable in a single template assay.When fishing out rare template variants, the best processive polymerases should be used to decrease both amplification and detection limits. The possibility of stochastic events, should be taken into account to correctly interpret the obtained data.

Evaluating bias of illumina-based bacterial 16S rRNA gene profiles.

Massively parallel sequencing of 16S rRNA genes enables the comparison of terrestrial, aquatic, and host-associated microbial communities with sufficient sequencing depth for robust assessments of both alpha and beta diversity. Establishing standardized protocols for the analysis of microbial communities is dependent on increasing the reproducibility of PCR-based molecular surveys by minimizing sources of methodological bias. In this study, we tested the effects of template concentration, pooling of PCR amplicons, and sample preparation/interlane sequencing on the reproducibility associated with paired-end Illumina sequencing of bacterial 16S rRNA genes. Using DNA extracts from soil and fecal samples as templates, we sequenced pooled amplicons and individual reactions for both high (5- to 10-ng) and low (0.1-ng) template concentrations. In addition, all experimental manipulations were repeated on two separate days and sequenced on two different Illumina MiSeq lanes. Although within-sample sequence profiles were highly consistent, template concentration had a significant impact on sample profile variability for most samples. Pooling of multiple PCR amplicons, sample preparation, and interlane variability did not influence sample sequence data significantly. This systematic analysis underlines the importance of optimizing template concentration in order to minimize variability in microbial-community surveys and indicates that the practice of pooling multiple PCR amplicons prior to sequencing contributes proportionally less to reducing bias in 16S rRNA gene surveys with next-generation sequencing.

Improved HF183 Quantitative Real-Time PCR Assay for Characterization of Human Fecal Pollution in Ambient Surface Water Samples

Quantitative real-time PCR (qPCR) assays that target the human-associated HF183 bacterial cluster within members of the genus Bacteroides are among the most widely used methods for the characterization of human fecal pollution in ambient surface waters. In this study, we show that a current TaqMan HF183 qPCR assay (HF183/BFDrev) routinely forms nonspecific amplification products and introduce a modified TaqMan assay (HF183/BacR287) that alleviates this problem. The performance of each qPCR assay was compared in head-to-head experiments investigating limits of detection, analytical precision, predicted hybridization to 16S rRNA gene sequences from a reference database, and relative marker concentrations in fecal and sewage samples. The performance of the modified HF183/BacR287 assay is equal to or improves upon that of the original HF183/BFDrev assay. In addition, a qPCR chemistry designed to combat amplification inhibition and a multiplexed internal amplification control are included. In light of the expanding use of PCR-based methods that rely on the detection of extremely low concentrations of DNA template, such as qPCR and digital PCR, the new TaqMan HF183/BacR287 assay should provide more accurate estimations of human-derived fecal contaminants in ambient surface waters.

Dual probe DNA capture for sensitive real-time PCR detection of Cryptosporidium and Giardia

Nucleic acid amplification for the enteropathogens Cryptosporidium and Giardia is complicated by low target template concentrations and PCR inhibitors. In this work we designed dual capture oligonucleotides for both Cryptosporidium and Giardia 18S rRNA targets which when utilized during DNA extraction from stool improved the limit of detection of our multiplex PCR assay by 1–2 logs, to as little as 10 cysts. When applied to clinical specimens, the method improved the real-time PCR CT by an average of 10.7 ± 9.7 cycles. This work provides a highly sensitive protocol for Cryptosporidium and Giardia when limit of detection is of utmost importance.

Quantitative real-time PCR (qPCR) detection chemistries affect enumeration of the Dehalococcoides 16S rRNA gene in groundwater

Quantitative real-time PCR (qPCR) commonly uses the fluorogenic 5′ nuclease (TaqMan) and SYBR Green I (SG) detection chemistries to enumerate biomarker genes. Dehalococcoides (Dhc) are keystone bacteria for the detoxification of chlorinated ethenes, and the Dhc 16S ribosomal RNA (rRNA) gene serves as a biomarker for monitoring reductive dechlorination in contaminated aquifers. qPCR enumeration of Dhc biomarker genes using the TaqMan or SG approach with the same primer set yielded linear calibration curves over a seven orders of magnitude range with similar amplification efficiencies. The TaqMan assay discriminates specific from nonspecific amplification observed at low template concentrations with the SG assay, and had a 10-fold lower limit of detection of ~3 copies per assay. When applied to Dhc pure cultures and Dhc-containing consortia, both detection methods enumerated Dhc biomarker genes with differences not exceeding 3-fold. Greater variability was observed with groundwater samples, and the SG chemistry produced false-positive results or yielded up to 6-fold higher biomarker gene abundances compared to the TaqMan method. In most cases, the apparent error associated with SG detection resulted from quantification of nonspecific amplification products and was more pronounced with groundwater samples that had low biomarker concentrations or contained PCR inhibitors. Correction of the apparent error using post-amplification melting curve analysis produced 2 to 21-fold lower abundance estimates; however, gel electrophoretic analysis of amplicons demonstrated that melting curve analysis was insufficient to recognize all nonspecific amplification. Upon exclusion of nonspecific amplification products identified by combined melting curve and electrophoretic amplicon analyses, the SG method produced false-negative results compared to the TaqMan method. To achieve sensitive and accurate quantification of Dhc biomarker genes in environmental samples (e.g., groundwater) and avoid erroneous conclusions, the analysis should rely on TaqMan detection chemistry, unless additional analyses validate the results obtained with the SG approach.