Low Signal-to-noise Ratio Conditions Research Articles

A New Extended Target Detection Method Based on the Maximum Eigenvalue of the Hermitian Matrix

In the field of radar target detection, the conventional approach is to employ the range profile energy accumulation method for detecting extended targets. However, this method becomes ineffective when dealing with non-stationary and non-uniform radar clutter scenarios, as well as long-distance targets with weak radar cross sections (RCSs). In such cases, the signal-to-noise ratio (SNR) of the target echo is severely degraded, rendering the energy accumulation detection algorithm unreliable. To address this issue, this paper presents a new extended target detection method based on the maximum eigenvalue of the Hermitian matrix. This method utilizes a detection model that incorporates observed data and employs the likelihood ratio test (LRT) theory to derive the maximum eigenvalue detector at low SNR. Specifically, the detector constructs a matrix using a sliding window block with the available data and then computes the maximum eigenvalue of the covariance matrix. Subsequently, the maximum eigenvalue matrix is transformed into a one-dimensional eigenvalue image, enabling extended target detection through analogy with the energy accumulation detection method. Furthermore, this paper analyzes the proposed extended target detection method from both theoretical and experimental perspectives, validating it through field-measured data. The results obtained from the measured data demonstrate that the method effectively enhances the SNR in low SNR conditions, thereby improving target detection performance. Additionally, the method exhibits robustness across different scattering center targets.

Improving ranging performance of SiPM LiDAR in low SNR conditions through an echo processing method and laser pulse modulation

Due to its numerous advantages such as high gain and low operating bias, the silicon photomultiplier (SiPM) holds great potential in LiDAR applications. However, it is more jittery at weak echoes and more sensitive to ambient light, making its ranging performance at low signal-to-noise ratios (SNRs) severely deteriorated. To enhance the ranging performance of SiPM LiDAR under low SNR, a novel echo processing method, to the best of our knowledge, was proposed based on the statistical property of SiPM responses and validated under relatively intensive sunlight (>50klx) using a self-developed LiDAR system. At the same time, laser pulse width modulation and multi-pulse laser emission are used in ranging experiments to maximize the advantages of this method. It has shown that increasing the laser pulse width within a certain range can improve ranging performance, and that emitting multiple laser pulses improves ranging performance more significantly. Utilizing a three-pulse laser with a peak power of only 3.2 W, a target 122 m away was ranged with a precision of 6.53 cm with only five accumulations.

SDR implementation of a light deep learning model based CNN for joint spectrum sensing and AMC

Automatic modulation classification (AMC) aims to blindly recognize the modulation type of a received signal in wireless systems. It is also a critical component of non-cooperative communication systems after the detection of the presence of a signal. In this paper, we introduce a robust approach, termed DET-AMC (joint Detection and Automatic Modulation Classification), employing Convolutional Neural Networks (CNNs) trained via transfer learning methodology. The main advantage of our approach is its ability to handle a wide range of modulation types, including 10 different schemes generated in Gnuradio and their detection using the same model. Through extensive experimentation, we evaluate the performance of our light CNN-based DET-AMC method across varying signal-to-noise ratio (SNR) levels, as well as in the presence of phase noise and frequency offset. We find that the CNN’s learned features, obtained through transfer learning, exhibit robustness, particularly in low SNR and various challenging conditions, leading to accurate modulation classification. In general, our approach outperforms existing methods by using the effectiveness of deep learning in capturing relevant discriminative features. Additionally, our model offers a robust solution for join detection and AMC by achieving an accurate probability of detection and modulation classification without the need for manual feature engineering or the consideration of frequency offset, phase noise or noise estimation. Our model achieves 100% accuracy for synthetic and real data at an SNR equal to -10 dB for detection, and 100% and 98% for classification of synthetic and real signals at −4 dB, respectively.

Intelligent interference cancellation and ambient backscatter signal extraction for wireless-powered UAV IoT network

Unmanned aerial vehicles (UAVs) offer a new approach to wireless communication, leveraging their high mobility, flexibility, and visual communication capabilities. Ambient backscatter communication enables Internet of Things devices to transmit data by reflecting and modulating ambient radio waves, eliminating the need for additional wireless channels, and reducing energy consumption and cost for sensors. However, passive ambient backscatter communication has limitations such as limited range and poor communication quality. By utilizing UAVs as communication nodes, these limitations can be overcome, expanding the communication range and improving the quality of communication. Although some research has been conducted on combining UAVs and ambient backscatter, several challenges remain. One key challenge is the strong direct link interference in ambient backscatter under UAV conditions, which significantly affects communication quality. In this paper, we propose an intelligent backward and forward straight link interference cancellation algorithm based on NOMA decoding technique to enhance ambient backscatter communication quality under UAV conditions and extract more ambient energy for UAV energy supply. The paper includes theoretical derivation, algorithm description, and simulation analysis to validate the error bit rate of labeled information bits. The results demonstrate that the forward algorithm reduces the error bit rate by approximately 20% under low signal-to-noise ratio (SNR) conditions, while the backward algorithm reduces the error bit rate under high SNR conditions. The combination of the forward and backward algorithms reduces the error bit rate under both high and low SNR conditions. The proposed method contributes to improving the quality of ambient backscatter communication in UAV settings.

Cascaded Plane Wave Ultrasound for Blood Velocity Vector Imaging in the Carotid Artery.

Cascaded dual-polarity waves (CDWs) imaging increases the signal-to-noise ratio (SNR) by transmitting trains of pulses with different polarity order, which are combined via decoding afterward. This potentially enables velocity vector imaging (VVI) in more challenging SNR conditions. However, the motion of blood in between the trains will influence the decoding process. In this work, the use of CDW for blood VVI is evaluated for the first time. Dual-angle, plane wave (PW) ultrasound, CDW-coded, and noncoded conventional PW (cPW), was acquired using a 7.8 MHz linear array at a pulse repetition frequency (PRF) of 8 kHz. CDW-channel data were decoded prior to beamforming and cross correlation-based compound speckle tracking for VVI. Simulations of single scatterer motion show a high dependence of amplitude gain on the velocity magnitude and direction for CDW-coded transmissions. Both simulations and experiments of parabolic flow show increased SNRs for CDW imaging. As a result, CDW outperforms cPW VVI in low SNR conditions, based on both bias and standard deviation (SD). Quantitative linear regression and qualitative analyses of simulated realistic carotid artery blood flow show a similar performance of CDW and cPW for high SNR (14 dB) conditions. However, reducing the SNR to 6 dB, results in a root-mean-squared error 2.7× larger for cPW versus CDW, and an R2 of 0.4 versus 0.9. Initial in vivo evaluation of a healthy carotid artery shows increased SNR and more reliable velocity estimates for CDW versus cPW. In conclusion, this work demonstrates that CDW imaging facilitates improved VVI of deeper located carotid arteries.

Effective time-series Data Augmentation with Analytic Wavelets for bearing fault diagnosis

In the realm of rotary machine maintenance, rolling bearings emerge as crucial yet frequently vulnerable components. Ensuring their operational integrity is pivotal for the overall safety and performance of the machinery. Traditional diagnostic methods have utilized a variety of signal processing techniques, ranging from blind source separation to wavelet analysis, and more recently, deep neural networks (DNNs). However, a significant challenge in this domain is the scarcity of labeled failure data in real-world applications, leading to a reliance on data augmentation (DA) techniques to enhance the quality and quantity of the training data. Compounding this problem is the use of DA techniques tailored for images, which are not suitable for the time–frequency representations. This study proposes an innovative Data Augmentation with Analytic Wavelets (DAAW) approach, tailored specifically for time-series (TS) data classification in bearing fault diagnosis. The essence of DAAW lies in its ability to generate synthetic scalogram samples that closely mirror the properties of original samples. The proposed DAAW is directly applied at the input stage of a learning model by successively adjusting predefined parameters to generate scalograms, without the need for auxiliary DA algorithms. This technique is versatile in generating synthetic time–frequency data samples, and the parameterization enables it to be tailored to different time series datasets. Through experimentation with publicly available datasets, we show that combining a simple Convolutional Neural Network (CNN) with the proposed approach results in improved performance. It outperforms existing methods, achieving a mean classification accuracy of 99.49%. The critical distance for average accuracy, as determined by the Nemenyi post-hoc test, is 0.4619. Our results also show enhanced performance with accuracy rates of 90.14%, 78.94%, and 62.86% even under low signal-to-noise ratio (SNR) conditions, using 80%, 60%, and 50% of the dataset, respectively, for model training. Notably, its efficacy remains robust even under challenging low SNR conditions. The proposed DAAW significantly improves classification accuracy in bearing fault diagnosis, simultaneously obviating the need for proxy DA tasks.

Rolling bearing compound fault diagnosis based on spatiotemporal intrinsic mode decomposition

Aiming at the vibration signal characteristics of multi-channel rolling bearing complex faults containing various shock components, a rolling bearing complex fault diagnosis model based on spatiotemporal intrinsic mode decomposition (STIMD) method and fast spectral kurtosis method was proposed. The spatiotemporal intrinsic mode decomposition method combines the signal atomic decomposition method with the idea of signal blind source separation. Through the fast independent component analysis and the nonlinear matching pursuit method of the established overcomplete dictionary base, various fault mode components are separated. The initial phase function selected based on the high kurtosis fault frequency band obtained by the fast spectral kurtosis method can better fit the bearing fault frequency domain characteristics, so that the spatiotemporal intrinsic mode decomposition method can more accurately separate various impact components in the vibration signal. The simulation model of bearing compound fault was established and the data collected from fault diagnosis experiment platform were used to verify that the STIMD method was effective in solving the problem of rolling bearing compound fault diagnosis. By analyzing the kurtosis changes under different signal noise ratio (SNR) conditions and comparing the simulation results with the fast independent component analysis method, it shows that the kurtosis index decomposed by the proposed method is more able to prove the existence of faults under the condition of low SNR, that is, the impact is completely covered by noise. Therefore, a spatiotemporal intrinsic mode decomposition method with fast spectral kurtosis optimization can solve the problem of blind source separation in the field of composite faults of multi-channel rolling bearings and realize composite fault diagnosis.

Effects of diagram plane on neural network based modulation recognition

Modulation recognition using deep learning presents challenges in effectively distinguishing high-order modulation schemes while maintaining a balance between complexity and recognition accuracy. In this study, we curate a comprehensive dataset in the rθ plane, encompassing eight distinct modulation schemes. Leveraging hyperparameter optimization and transfer learning, we explore the capabilities of various CNN-based architectures, including MobileNetV2, ResNet50V2, ResNet101V2, InceptionV3, ResNet152V2, Xception, and InceptionResNetV2, for the classification of modulation schemes. The simulation results demonstrate that with signal-to-noise ratio (SNR) values exceeding 5 dB, all models exhibit classification accuracies surpassing 50% and approach near-perfect accuracy at an SNR value of 20 dB. However, under low SNR conditions, such as 5 dB, the recognition accuracies of all models, except for ResNet152V2 and InceptionV3, show minimal variation. As the SNR increases by 5 dB from −5 dB to 20 dB, ResNet152V2 and InceptionV3 demonstrate remarkable classification accuracy improvements, exceeding 40%, 30%, 30%, 10%, and 15%, respectively. In contrast, the other models do not exhibit such robust responsiveness in accuracy enhancements. The remarkable performance improvements are achieved by fine-tuning pre-trained models through these processes.

SSANet: normal-mode interference spectrum extraction via SSA algorithm-unrolled neural network

In ocean acoustic fields, extracting the normal-mode interference spectrum (NMIS) from the received sound intensity spectrum (SIS) plays an important role in waveguide-invariant estimation and underwater source ranging. However, the received SIS often has a low signal-to-noise ratio (SNR) owing to ocean ambient noise and the limitations of the received equipment. This can lead to significant performance degradation for the traditional methods of extracting NMIS at low SNR conditions. To address this issue, a new deep neural network model called SSANet is proposed to obtain NMIS based on unrolling the traditional singular spectrum analysis (SSA) algorithm. First, the steps of embedding and singular value decomposition (SVD) in SSA is achieved by the convolutional network. Second, the grouping step of the SSA is simulated using the matrix multiply weight layer, ReLU layer, point multiply weight layer and matrix multiply weight layer. Third, the diagonal averaging step was implemented using a fully connected network. Simulation results in canonical ocean waveguide environments demonstrate that SSANet outperforms other traditional methods such as Fourier transform (FT), multiple signal classification (MUSIC), and SSA in terms of root mean square error, mean absolute error, and extraction performance.

Joint micrograph denoising and protein localization in cryo-electron microscopy

Abstract Cryo-electron microscopy (cryo-EM) is an imaging technique that allows the visualization of proteins and macromolecular complexes at near-atomic resolution. The low electron doses used to prevent radiation damage to the biological samples result in images where the power of noise is 100 times stronger than that of the signal. Accurate identification of proteins from these low signal-to-noise ratio (SNR) images is a critical task, as the detected positions serve as inputs for the downstream 3D structure determination process. Current methods either fail to identify all true positives or result in many false positives, especially when analyzing images from smaller-sized proteins that exhibit extremely low contrast, or require manual labeling that can take days to complete. Acknowledging the fact that accurate protein identification is dependent upon the visual interpretability of micrographs, we propose a framework that can perform denoising and detection in a joint manner and enable particle localization under extremely low SNR conditions using self-supervised denoising and particle identification from sparsely annotated data. We validate our approach on three challenging single-particle cryo-EM datasets and projection images from one cryo-electron tomography dataset with extremely low SNR, showing that it outperforms existing state-of-the-art methods used for cryo-EM image analysis by a significant margin. We also evaluate the performance of our algorithm under decreasing SNR conditions and show that our method is more robust to noise than competing methods.

Accurate piecewise centroid calculation algorithm for wavefront measurement in adaptive optics.

Adaptive optics using direct wavefront sensing (direct AO) is widely used in two-photon microscopy to correct sample-induced aberrations and restore diffraction-limited performance at high speeds. In general, the direct AO method employs a Sharked-Hartman wavefront sensor (SHWS) to directly measure the aberrations through a spot array. However, the signal-to-noise ratio (SNR) of spots in SHWS varies significantly within deep tissues, presenting challenges for accurately locating spot centroids over a large SNR range, particularly under extremely low SNR conditions. To address this issue, we propose a piecewise centroid calculation algorithm called GCP, which integrates three optimal algorithms for accurate spot centroid calculations under high-, medium-, and low-SNR conditions. Simulations and experiments demonstrate that the GCP can accurately measure aberrations over a large SNR range and exhibits robustness under extremely low-SNR conditions. Importantly, GCP improves the AO working depth by 150 µm compared to the conventional algorithm.

Research on an Ultraviolet Spectral Denoising Algorithm Based on the Improved SVD Method

The utilization of ultraviolet (UV) absorption spectroscopy for monitoring the concentration of specific decomposition gas components in gas-insulated switchgear (GIS) can provide a means to assess its insulation status. Nevertheless, UV optical modules currently deployed in the field are susceptible to external interferences like ambient noise and equipment vibrations. Real-time spectral data acquisition often suffers from significant noise contamination, directly impinging on subsequent feature extraction and detection accuracy. This paper presents an optimized singular value decomposition (SVD) noise reduction method for mitigating noisy spectral signals. First, each singular value within the noisy signal is transformed into a component signal. Next, the highest frequency value in the signal serves as an indicator to characterize the signal. Finally, the primary frequency values are arranged based on the decreasing singular values of the original noisy signal. The singular value corresponding to the first primary frequency value surpassing a preset threshold is selected as the effective order for denoising. Random noise with varying intensities was intentionally introduced to the UV spectral signal of sulfur dioxide (SO2), followed by noise reduction procedures. It is shown that the improved SVD noise reduction algorithm proposed in this paper enhances the signal-to-noise ratio (SNR) by 18.02% and 16.86%, and reduces the root-mean-square error (RMSE) by 15.13% and 14.92%, respectively, compared with the singular value difference spectrum (SVDS) denoising method and wavelet transform denoising method under the condition of low SNR. Furthermore, there exists a linear relationship between the concentration of SO2 samples and the eigenvalues of the UV spectra, demonstrating a higher linear goodness with a coefficient of 0.99735. The denoising method proposed in this paper does not require the manual setting of various types of parameters, and has a better ability to deal with the noise of UV spectral signals in engineering sites with complex environments.

STIF: A Spatial–Temporal Integrated Framework for End-to-End Micro-UAV Trajectory Tracking and Prediction With 4-D MIMO Radar

The early trajectory prediction of micro unmanned aerial vehicles (micro-UAVs) with random behavior intentions facilitates the elimination of potential safety hazards. However, due to the property of a small radar cross-section (RCS), the backscattered radar signals from micro-UAVs may be submerged under strong background clutters, leading to distorted tracking and false prediction. To this end, this paper presents a spatial-temporal integrated framework (STIF) for end-to-end micro-UAV trajectory tracking and prediction based on a four-dimensional (4D) multiple-input-multiple-output (MIMO) radar. Especially, to obtain accurate trajectories in low signal-to-noise ratio (SNR) conditions, the target detection and tracking are considered to be interdependent and addressed jointly in this work, rather than treating them as two separate processes in conventional methods. The advantage is that with the assistance of tracking, all consecutive spatial information encoded in raw radar streams can be incorporated to enhance the continuous detection performance, avoiding information loss using only one single scan. Subsequently, to accommodate high maneuvering scenarios, an intention-aware end-to-end transformer-based prediction framework is presented to simultaneously discover both spatial and temporal dependencies hiding in long-term estimated trajectories. Consequently, a 4D frequency modulated continuous wave (FMCW) radar is utilized to evaluate the proposed system. Numerous simulation and experimental results indicate that STIF outperforms competing state-of-the-art methods and achieve superior prediction performance with the accuracy of 0.3851m in low SNR conditions.

JCCM: Joint conformer and CNN model for overlapping radio signals recognition

AbstractOverlapping radio signals recognition is attracting more attention as the development and ubiquitous application of radio technologies. The traditional blind signal separation (BSS) method is mostly not effective when both radio propagation effects and low signal‐to‐noise ratio (SNR) scenarios are taken into consideration. In this letter, joint conformer and CNN model (JCCM) is proposed to separate and recognize the overlapping radio signals which are also unknown by the monitor node. JCCM utilizes the attention mechanism of conformer to encode signal spectrum into feature maps and decodes the feature maps into signal component proportions by perceiving the global and local features through convolutional neural networks (CNN). In addition, a signal preprocessing module is designed including MinPool and AvgPool layers for signal denoising. JCCM is evaluated in terms of signal separation, scaling preservation and principal signal classification experiments. The results show that JCCM has better performance especially in low SNR conditions.

Single acoustic vector sensor DOA enhanced by unsaturated bistable stochastic resonance with linear amplitude response constrained

Acoustic vector sensors (AVS) are increasingly utilized for remote target passive perception, but accurate direction-of-arrival (DOA) estimation remains a formidable challenge, particularly in the presence of heavy background noise. In this paper, we propose a novel DOA estimation method that utilizes complex acoustic intensity measurements (CAIM) and unsaturated bistable stochastic resonance with linear amplitude response constrained (LAR-UBSR). The proposed method aims to exploit the excellent denoising performance of stochastic resonance (SR) to enhance the accuracy of DOA estimation. The proposed LAR-UBSR method is based on the theoretical analysis of the signal pre-processing requirements of CAIM, which determines the linear amplitude response and fixed phase shift. LAR-UBSR achieves a stable phase shift and linear amplitude response by utilizing the unsaturated potential well and limited potential parameters adjustment method of SR. We analyze the amplitude response linearity of LAR-UBSR under different signal-to-noise ratios (SNRs) and a wide range of frequencies, demonstrating a larger linear amplitude response interval that meets the signal pre-processing requirements of CAIM. Numerical analysis and application verification show that the proposed DOA method outperforms existing methods, particularly under low SNR conditions. The results suggest the potential for high-accuracy DOA estimation using nonlinear signal processing strategies in the presence of heavy background noise.

Dim Moving Multi-Target Enhancement with Strong Robustness for False Enhancement

In a space-based infrared system, the enhancement of targets plays a crucial role in improving target detection capabilities. However, the existing methods of target enhancement face challenges when dealing with multi-target scenarios and a low signal-to-noise ratio (SNR). Furthermore, false enhancement poses a serious problem that affects the overall performance. To address these issues, a new enhancement method for a dim moving multi-target with strong robustness for false enhancement is proposed in this paper. Firstly, multi-target localization is applied by spatial–temporal filtering and connected component detection. Then, the motion vectors of each target are obtained using optical flow detection. Finally, the consecutive images are convoluted in 3D based on the convolution kernel guided by the motion vectors of the target. This process allows for the accumulation of the target energy. The experimental results demonstrate that this algorithm can adaptively enhance a multi-target and notably improve the SNR under low SNR conditions. Moreover, it exhibits outstanding performance compared to other algorithms and possesses strong robustness against false enhancement.

Acoustic bird species classification under low SNR and small-scale dataset conditions

Bird species classification based on acoustic monitoring has attracted increasing attention. Two common methods, deep learning and feature extraction-based, are widely applied for bird sound classification. Although deep learning based methods have shown great success, they usually require an enormous amount of labeled data to train models, which could make these approaches prohibitive since collecting enough labeled samples of various species, especially rare birds, is a difficult task. On the other hand, feature extraction based methods are less dependent on the number of samples and have achieved remarkable classification performance for small-scale datasets, however they prove susceptible to signal-to-noise ratio (SNR). To address this problem, a new method is proposed for acoustic bird species classification in this work, which is well suited to low SNR and small-scale dataset conditions. Firstly, an adaptive threshold scheme based on the constant false alarm rate (CFAR) criterion is designed to more effectively detect potential bird sound segments in field recordings. Then, the local wavelet acoustic pattern (LWAP) and Mel-frequency cepstral coefficients (MFCC) features are extracted, which are further processed using improved vector of locally aggregated descriptors (VLAD) encoding. Finally, encoded LWAP and MFCC features are fused with dimensionality reduction and a classifier with weighted distance is used for classification. Corresponding feature space analysis upon feature fusion is also provided demonstrating explicit improvement in bird sounds discrimination under low SNR conditions. Experimental results on the dataset consisting of 11 bird species under low SNR and small-scale conditions reveal that the proposed method achieves considerable improvement in classification performance as compared with other feature extraction based methods. Meanwhile, our approach also outperforms state-of-the-art deep learning based methods.

IDT: An Integration of Detection and Tracking Toward Low-Observable Multipedestrian for Urban Autonomous Driving

Robust pedestrian trajectory-tracking is an essential prerequisite to traffic accident prevention. However, it is a challenging task in urban autonomous driving, since the weak backscattered signals from pedestrians with small radar cross-section may be submerged in strong background clutters, especially under adverse weather conditions. On this account, this article presents an integration of detection and tracking (iDT) toward multipedestrian with a low signal-to-noise ratio (SNR). In particular, in contrast to conventional methods, in which the detection and tracking are treated as two separate processes, we address them jointly to ensure the accuracy of continuous detection and tracking in low SNR conditions. Another distinguishing element is that to accommodate the time-varying number of targets, the Bayesian framework is tailored by augmenting the state vector with a multipedestrian evolutional indicator. The advantage is that all targets can be tracked simultaneously by searching the global likelihood ratio of a spectrum once, rather than assigning an individual tracker to each target in conventional methods. Furthermore, through the proposed integrated framework, the data association problem is circumvented because there is no explicit measurement-target assignment process in our approach. In addition, a commercial automotive multiple-input-multiple-output millimeter-wave radar sensor is employed to validate the proposed method. Consequently, numerous simulation and experiment results turn out that iDT shows unique advantages in low-observable multipedestrian tracking compared with traditional methods.

Satellite Interference Source Direction of Arrival (DOA) Estimation Based on Frequency Domain Covariance Matrix Reconstruction.

Direction of arrival (DOA) estimation is an effective method for detecting various active interference signals during the satellite navigation process. It can be utilized for both interference detection and anti-interference applications. This paper proposes a DOA estimation algorithm for satellite interference sources based on frequency domain covariance matrix reconstruction (FDCMR) to address various types of active interference that may occur in the satellite navigation positioning process. This algorithm can estimate the DOA of coherent signals from multiple frequency points under low signal-to-noise ratio (SNR) conditions. The signals received from the array are transformed from the time domain to the frequency domain using a fast Fourier transform (FFT). The data corresponding to the frequency point of the target signal is extracted from the signal in the frequency domain. The frequency domain covariance matrix of the received array signals is reconstructed by utilizing its covariance matrix property. The spatial spectrum search method is used for the final DOA estimation. Simulation experiments have shown that the proposed algorithm performs well in the DOA estimation under low SNR conditions and also resolves coherency. Moreover, the algorithm's effectiveness is verified through comparison with three other algorithms. Finally, the algorithm's applicability is validated through simulations of various interference scenarios.

Feed-forward cascaded stochastic resonance and its application in ship radiated line signature extraction

Extracting ship-radiated line signatures from intense background noise presents a significant challenge in remote passive sonar detection and identification. While stochastic resonance (SR) has shown promise for enhancing signal-to-noise ratio (SNR), cascaded stochastic resonance (CSR) offers a superior extension by gradually transitioning energy from high to low frequencies, resulting in smoother waveforms and more evident signatures. However, CSR relies heavily on the first level and lacks robustness, especially at slightly lower SNR. To overcome these limitations, we propose a feed-forward cascaded stochastic resonance (FCSR) method that leverages complete target signal information in each level and superimposes it with the output from the last level, leading to gradual improvements in SNR with high robustness. The superposition weights are designed as a function of the number of cascaded levels with an increasing trend to optimize the output of the entire cascaded system. Furthermore, a phase alignment strategy was developed to improve the superposition process. Through theoretical analysis, we demonstrate the effectiveness of the proposed FCSR method. Further simulation analyses demonstrates that FCSR outperforms CSR, with a remarkable 18 dB improvement in filtering performance under low SNR conditions, an average anti-noise ability enhancement of over 10 dB, and a robustness improvement exceeding 30% at −30 dB. We also validate the practicality and effectiveness of our proposed method through application verification, exhibiting excellent enhancement performance. This study illuminates the importance of reutilizing complete target signal information and emphasizes the potential of cascaded systems to extract signatures from heavy background noise.