Low Detection Limit Research Articles

Core-shell magnetic covalent organic polymer nanocomposites as an adsorbent for the extraction of flavonoids.

A novel 3D magnetic nanocompositematerialbased on covalent organic polymers was successfully synthesized and utilized as an efficient sorbent for magnetic solid-phase extraction. It exhibited a regular core-shell structure, large specific surface area, superior stability, and paramagnetism. To evaluate its extraction efficiency, six flavonoids were tested, demonstrating maximum adsorption capacities ranging from 90 to 218mg/g. Additionally, the material exhibited remarkable reusability and mechanical stability, maintaining its original state over eight cycles with consistent recovery. An analytical strategy combining magnetic solid-phase extraction with high performance liquid chromatography and tandem mass spectrometry was developed for the determination of flavonoids in orange, honey, soybean, and Dioscorea bulbifera L. samples. The low limits of detection (0.01-0.1ng/mL) and limits ofquantification (0.05-0.5ng/mL), as well as satisfactory recovery (80.4-114.8%), were obtained. The linear range started from the limits of quantification to 500ng/mL with R2 ≥ 0.9929. These results suggest that the prepared adsorbent possesses excellent adsorption capabilities for flavonoids, highlighting its significant potential for detecting these compounds in complex sample matrices.

Carbon Nanocomposites-based Electrochemical Sensors and Biosensors for Biomedical Diagnostics.

Detection of emergent biomolecules or biomarkers remains crucial for early diagnosis in advancing healthcare monitoring and biomedicine. The possibility for rapid detection, real-time monitoring, high sensitivity, low detection limit, good selectivity, and low cost is central, among other significant issues for advancing point-of-care diagnosis. Carbon-based nanocomposites have been employed as sensing materials for various biomarkers due to their high surface-to-volume ratio, high electrical conductivity, chemical stability, and biocompatibility. The carbon nanomaterials, such as carbon nanotubes (CNTs), graphene (GR), carbon quantum dots (CQDs), carbon fibres (CFs), and their nanocomposites have broadly integrated with numerous sensing electrode materials for the detection of biomarkers under various experimental settings. The present review includes the recent advances in the development of carbon nanomaterials-based electrochemical sensors and biosensors for biomedical applications. The preparation, electrode preparation, effective utilization of carbon-derived nanomaterials, and their sensing performances towards numerous biomarkers have been highlighted. The state-of-the-merit, challenges, and prospects for designing carbon nanocomposites-based electrochemical sensor/biosensor platforms for biomedical diagnostics have also been described.

Gemini Surfactant-Induced Cysteine-Capped Copper Nanoclusters Self-Assembly with Enhanced Peroxidase-Like Activity and Colorimetric Glutathione Sensing.

We have prepared a novel assembly with copper nanoclusters (CuNCs) and imidazolium-based gemini surfactants (different chain lengths). These novel mimic enzymes formed through the assembly of nanocluster-gemini surfactants have been utilized in creating colorimetric sensors to detect biomolecules. Yet, understanding the method for detecting glutathione (GSH) and its sensing mechanism using this specific assembly-based colorimetric sensor poses a significant challenge. Because of the role of surface ligands, the complexes of cysteine-capped CuNCs (Cys-CuNCs) and gemini surfactants exhibit strong amphiphilicity, enabling them to self-assemble like a molecular amphiphile. We have investigated the kinetics and catalytic capabilities of this Cys-CuNCs@gemini surfactant assembly through peroxidase-like activity. Additionally, a sensitive and simple-to-use colorimetric sensing approach for glutathione (GSH) is also disclosed here, demonstrating a low limit of detection, by using this peroxidase-like activity of Cys-CuNCs@gemini surfactant assemblies. Thus, the remarkable advantages of the Cys-CuNCs@gemini surfactant nanozyme make it suitable for the precise colorimetric detection of GSH, demonstrating excellent sensitivity and reliable selectivity. Additionally, it performs well in detecting GSH in various soft drinks.

Rapid monitoring and early warning of Phaeocystis globosa bloom based on an effective electrochemical biosensor

Harmful algal blooms (HABs) have posed a significant threat to human society and the ecological environment. In particular, the outbreak of Phaeocystis globosa (P. globosa) bloom could affect coasts nuclear power safety. Unfortunately, current ecological monitoring tools fail to dynamically detect the densities of solitary cells from P. globosa in the pre-outbreak phases, thus affecting early interventions. In the study, an effective electrochemical DNA biosensor was developed to serve the rapid and effective detection of P. globosa DNA through a specific DNA probe strategy. Especially, its good specificity and lower limit of detection (LOD, 17 pg/μL or 1063 cells/L) met the monitoring requirement of solitary-cell population change of P. globosa before the cyst formation (threshold: 1.0 × 107 cells/L), which is the key step in the algal bloom outbreaks and influences the outbreak cycle and scale. Furthermore, the accuracy of this electrochemical biosensor for the quantitative detection of solitary-cell P. globosa was confirmed by using the classical microscopic examination techniques (r = 0.981, P < 0.001). Moreover, its applicability was also validated by actual sample testing (r = 0.996, P < 0.001). Therefore, the novel technology offers great potential to improve dynamic detection and early warning of P. globosa bloom.

Highly Robust and Self-Adhesive Soft Strain Gauge via Interface Design Engineering.

Highly robust soft strain gauges are rapidly emerging as a promising candidate in the fields of vital signs and machine conditions monitoring. However, it is still a key challenge to achieve high-performance strain sensing in these sensors with mechanical/electrical robustness for long-term usage. The multilayer structural design of sensors enhances sensing performance while the interfacial connection of heterogeneous materials between different layers is weak. Herein, inspired by the efficient perception mechanism of scorpion slit sensilla with tough interface interconnections, the synergy of ultra-high electrical performance and mechanical robustness is successfully achieved via interface design engineering. The developed multilayer soft strain gauge (MSSG) exhibits a strain sensitivity beyond 105, a lower detection limit of 8.3µm, a frequency resolution within 0.1Hz, and cyclic stability over 63000 strain cycles. Also, the tough interface improves the level of heterogeneous integration in the MSSG which allows to endure different stresses. Furthermore, an MSSG-based wireless strain monitoring system is developed that enables applications on different complex dynamic surfaces, including accurate identification of human throat activity and monitoring of rolling bearing conditions.

A Host–Guest Platform for Highly Efficient, Quantitative, and Rapid Detection of Nitroreductase

Nitroreductase (NTR) is an enzyme expressed at an abnormally high level in solid tumors, which is associated with the hypoxia level in tumors. The establishment of a high-performance and convenient fluorescent platform for the fast monitoring of NTR is of pivotal importance. Herein, a novel host–guest complex was created by encapsulating a fluorescent substrate GP-NTR within a metal–organic capsule Zn-MPB that included a NADH mimic for the detection of hypoxia via responding to nitroreductase (NTR) with fast responsiveness and good fluorescence imaging. Notably, the double-substrate process was streamlined to a single–substrate process by the host–guest supramolecular method in the catalytic process of NTR, which enabled the reaction to be independent of the cofactor NADH supply and shortened the distance between the substrate and the active site of NTR. The increasing fluorescence intensity of Zn-MPB⊃GP-NTR exhibits a linear relationship with NTR concentration and shows a fast response toward NTR in solution in tens of seconds. Zn-MPB⊃GP-NTR also displays high sensitivity to NTR with a low detection limit of 6.4 ng/mL. Cells and in vivo studies have confirmed that Zn-MPB⊃GP-NTR could be successfully applied for the fast imaging of NTR in NTR-overexpressed tumor cells and tumor-bearing animals. The host–guest platform not only provides a new avenue for the design and optimization of a fluorescence detection platform for the rapid and quantitative detection of NTR activity, but also offers an imaging tool for the early diagnosis of hypoxia-related tumors.

Novel application of carbon nanotube electrodes for electrochemical detection of amino acids in athlete’s biological samples

Understanding different physiological processes and spotting any health problems, especially in athletes, depend on tracking the quantities of amino acids in biological samples. This study looked at the creation of a unique electrochemical sensor for the sensitive and targeted identification of the necessary amino acid methionine in biological materials. Based on a modified glassy carbon electrode (GCE) surface, the sensor incorporated a tungsten disulfide (WS2) and carbon nanotube (CNT) nanocomposite. The improved electrical conductivity and catalytic activity of this material combination towards methionine oxidation led to its selection. The sensor that was created showed remarkable selectivity for methionine over other amino acids, along with a wide linear range of 5–1475 μM and a low detection limit of 10 nM. A relative standard deviation of 3.62 % was obtained across ten consecutive measurements, confirming the sensor's repeatability. The practical use of the CNTs-WS2/GCE sensor was verified by the detection of MTN in human blood serum, urine, and food samples. The recovery values ranged from 93.00 % to 99.40 %, and the relative standard deviation was less than 4.71 %. Based on these findings, we believe that our new CNTs-WS2/GCE sensor holds great potential for quick and precise methionine identification in biological samples from athletes.

Selective colorimetric detection of inorganic arsenic (iAsIII) using homocysteine‐modified gold nanoparticles

AbstractArsenic contamination in environmental waters poses global health and environmental risks. This study addresses the urgent need for rapid, selective, and sensitive detection of inorganic arsenic (iAsIII) in environmental samples. Leveraging the unique properties of gold nanoparticles (AuNPs) and the selective binding affinity of homocysteine (Hcy), we developed a novel colorimetric sensor for iAsIII detection. Our investigation elucidates the mechanism by which Hcy modifies AuNPs, enabling the selective detection of iAsIII ions through chelation between amine and carboxyl groups, primarily with the predominant species H2AsO3− at pH 12.0. Our sensor achieves high selectivity (&gt;10‐fold) for iAsIII amid various interfering ions commonly found in environmental samples. Furthermore, we demonstrate exceptional sensitivity in detecting iAsIII, with a low limit of detection (LOD) of 67 nM, aligning with regulatory standards for arsenic concentration in drinking water. The selectivity and sensitivity of our sensor were validated through experiments with various metal ions and real water samples. In conclusion, our study presents a comprehensive understanding of the mechanism, selectivity, and sensitivity of Hcy‐modified AuNPs in detecting iAsIII, offering a versatile nanosensor platform with significant implications for environmental monitoring and public health.

Design of AI-Enhanced and Hardware-Supported Multimodal E-Skin for Environmental Object Recognition and Wireless Toxic Gas Alarm

HighlightsA novel organohydrogel-based multimodal e-skin with excellent sensing performance for temperature, humidity, pressure, proximity, and NO2 is proposed for the first time, showing powerful sensing capabilities beyond natural skin.The developed multimodal e-skin exhibited extraordinary sensing performance at room temperature, including fast pressure response time (0.2 s), high temperature sensitivity (9.38% °C-1), a wide range of humidity response (22%–98% RH), high NO2 sensitivity (254% ppm-1), a low detection limit (11.1 ppb NO2) and the abilities to sense the proximity of objects accurately, which are yet achieved by previous e-skins.The multimodal e-skin was combined with the deep neural network algorithm and wireless alarm circuit to achieve zero-error classification of different objects and rapid response to NOx leak incidents, proving the feasibility of the e-skin-assisted rescue robot for post-earthquake rescue.

Stable Europium(III) Metal-Organic Framework Fluorescence Probe for Intelligent Visualization Detection of Gossypol and Nitrofuran Antibiotics in Real Samples.

Gossypol (Gsp) and antibiotics present in water bodies become organic pollutants that are harmful to human health and the ecological environment. Accurate and effective detection of these pollutants has far-reaching significance in many fields. A new three-dimensional metal-organic framework (MOF), {[Eu3(L)2(HCOO-)(H2O)3]·2H2O·2DMF}n (Eu-MOF), was synthesized from 3,5-bis(2,4-dicarboxylphenyl)nitrobenzene (H4L) ligand and Eu3+ via the solvothermal method in this paper. The Eu-MOF demonstrates strong red fluorescence and can remain stable in different pH solutions. The MOF fluorescence probe could detect organic pollutants through the "shut-off" effect, with a fast response speed and a low detection limit [Gsp, nitrofurantoin (NFT), and nitrofurazone (NFZ) for 0.43, 0.38, and 0.41 μM, respectively]. During the testing process, Eu-MOF exhibited good selectivity and recoverability. Furthermore, the mechanism of fluorescence quenching was investigated, and the recoveries were also good in real samples. This paper introduced a deep learning model to recognize the fluorescence images, a portable intelligent logic detector designed for real-time detection of Gsp by logic gate strategy, and an anticounterfeiting mark prepared based on inkjet printing. Importantly, this work provides a new way of thinking for the detection of organic pollutants in water with high sensitivity and practicality by combining the fluorescence probe with machine learning and logical judgment.

Near-infrared and multifunctional fluorescent probe enabled by cyanopyridine cyanine dye for bisulfite recognition and biological imaging

SO2 derivatives, sulfite/bisulfite, are widely employed in both the food processing and drug synthesis industries. Despite their widespread application, excessive levels of sulfite/bisulfite can negatively impact human health. Most probes for detecting sulfite/bisulfite are restricted by their fluorescence within the visible spectrum range and poor solubility in aqueous solution, which limit their use in food testing and biological imaging. Herein, a near-infrared probe comprising of the cyanopyridine cyanine skeleton, 4-((Z)−2-((E)−2-chloro-3-(2-cyano-2-(1-methylpyridine-4(1H)-ylidene)ethylidene)cyclohex-1-en-1-yl)−1-cyanovinyl)−1-methylpyridin-1-ium (abbreviated as CCP), was developed. This probe enables precise quantification of bisulfite (HSO3-) in almost pure buffered solutions, showing a near-infrared fluorescence emission at 784 nm with an impressively low detection limit of 0.32 μM. The probe stands out for its exceptional selectivity, minimal susceptibility to interference, and strong adaptability. The probe CCP utilizes the CC bond to trigger a near-infrared fluorescence quenching reaction with HSO3- via nucleophilic addition, which effectively disrupts the large delocalization within the molecule for accurate HSO3- identification. Moreover, the probe has been successfully applied in detecting HSO3- in various food products and living cells, simplifying the measurement of HSO3- content in water samples. This advancement not only enhances the analytical capabilities but also contributes to ensuring food safety and environmental protection. Environmental ImplicationSO2 derivatives including sulfite/bisulfite, serving dual roles as preservatives and antioxidants, have widespread application across various sectors including food preservation, water sanitation, and the pharmaceutical industry. Despite their widespread application, excessive levels of sulfite/bisulfite can affect human health. Developing methods for precisely and sensitively detecting sulfite/bisulfite in food products and biological samples is important for ensuring food safety and environmental protection. Here, a sensitive near-infrared and multifunctional fluorescent probe in a 99.9 % buffered solution, along with water gel encapsulation, has been successfully applied for the detection of bisulfite in food, authentic water samples, and biological cells.

Novel solution-gated transistor sensor-based SnO2 epitaxial thin films grown by pulsed laser deposition for nitrite detection.

A solution-gate controlled thin-film transistor with SnO2 epitaxial thin films (SnO2-SGTFT) is successfully utilized for highly sensitive detection of nitrite. The SnO2 films are deposited as channel materials on a c-plane sapphire (c-Al2O3) substrate through pulsed laser deposition (PLD), with superior crystal quality and out-of-plane atomic ordering. PtAu NPs/rGO nanocomposites are electrodeposited on agold electrode to function as a transistor gate to further enhance the nitrite catalytic performance of thedevice. The change in effective gate voltage due to the electrooxidation of nitrite on the gate electrode is the primary sensing mechanism of the device. Based on the inherent amplification effect of transistors, the superior electrical properties of SnO2, and the high electrocatalytic activity of PtAu NPs/rGO, the SnO2-SGTFT sensor has a low detection limit of 0.1nM and a wide linear detection range of 0.1nM ~ 50mM at VGS = 1.0V. Furthermore, the sensor has excellent characteristics such as rapid response time, selectivity, and stability. The practicability of the device has been confirmed by the quantitative detection of nitrite in natural lake water. SnO2 epitaxial films grown by PLD provide a simple and efficient way to fabricate nitrite SnO2-SGTFT sensors in environmental monitoring and food safety, among others. It also provides a reference for the construction of other high-performance thin-film transistor sensors.

DNA nanosensor based on bipedal 3D DNA walker-driven proximal catalytic hairpin assembly for sensitive and fast TK1 mRNA detection.

Hyperproliferative diseases are the first step for tumor formation; thymidine kinase 1 (TK1) mRNA is closely related to cell proliferation. Therefore, the risk of malignant proliferation can be identified by sensitively detecting the variance in TK1 mRNA concentration, which can be used for tumor auxiliary diagnosis and monitoring tumor treatment. Owing to the low abundance and instability of TK1 mRNA in real samples, the development of a sensitive and fast mRNA detection method is necessary. A DNA nanosensor that can be used for detecting TK1 mRNA based on bipedal 3D DNA walker-driven proximal catalytic hairpin assembly (P-CHA) was developed. P-CHA hairpins were hybridized to a linker DNA strand coupled with magnetic nanoparticles to increase their local concentrations. The bipedal DNA walking on the surface of NPs accelerates reaction kinetics using the proximity effect. Taking advantage of the signal amplification of P-CHA as well as the rapid reaction rate of the DNA walker in 80min, the proposed sensor detects TK1 mRNA with a low detection limit of 14pM and may then be applied toclinical diagnosis.

Development of an opto-electrochemical sensor for the detection of malathion using manganese metal–organic framework (Mn-MOF)

This paper presents a new method for detecting malathion pesticides using a modified screen-printed electrode (SPE) with a fluorescence quenching technique. The manganese-based MOF was synthesized using the solvothermal method. The synthesized MOFs were characterized by transmission electron microscopy (TEM), x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and Raman spectroscopy. The material’s electrocatalytic properties were assessed via electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). Within the concentration range of 0.89 µM to 5.95 µM, the material’s response to malathion was analyzed with square wave voltammetry (SWV), giving rise to a detection limit of 39.097 nM. Fluorescence quenching studies have been carried out between 0.039 and 0.56 µM, with a lower detection limit of 62.03 nM. A sensor with good anti-interference properties was tested for selectivity and practicability in detecting malathion in real samples, proving its potential use in this area.

Keggin type Polyoxometalate-based metal-organic frameworks with electrocatalytive activity as effective multifunctional amperometric sensors for metal ions and ascorbic acid

Polyoxometalates (POMs) based metal-organic frameworks (POMOFs) integrate the merits of POMs with excellent redox properties and MOFs with highly ordered porous crystalline structures, which show potential electrochemical applications relying on the synergistic catalytic effect. Here, two new Keggin-type POMOFs [Cd(btbu)2(H2O)2(PMo12O40)] (CUST-636), [Cd(btbu)2(H2O)(SiW12O40)0.5](CUST-638) are synthesized using flexible ligand of 1,4-bis(1,2,4-triazol-1-yl)butane (abbreviated as btbu) as a ligand by hydrothermal method. PXRD, IR, and TG analysis were carried out on CUST-636 and CUST-638. Then, they were prepared into electrode materials (referred to as 636-GCE and 638-GCE), to explore the electrocatalytic properties. 636-GCE and 638-GCE show good electrocatalytic redox performance against KBrO3, KNO2, K2Cr2O7 and AA. Furthermore, detection of trace Cr(VI) was conducted using electrochemical sensors 636-GCE and 638-GCE. The low detection limits (LODs) of CUST-636 and CUST-638 were 0.32 and 0.45 μM, respectively, which were lower concentrations of Cr(VI) in drinking water than the maximum allowable concentration specified by the World Health Organization (WHO).

Computational simulation-assisted template selection of magnetic MOFs molecularly imprinted materials applying the adsorption and detection of multiple fluoroquinolones

This study utilized computational simulation and surface molecular imprinting technology to develop a magnetic metal-organic framework molecularly imprinted polymer (Fe3O4@ZIF-8@SMIP) capable of selectively recognizing and detecting multiple fluoroquinolones (FQs). The Fe3O4@ZIF-8@SMIP material was synthesized using the “common” template-ofloxacin, identified by computational simulation, demonstrating notable adsorption capacity (88.61–212.93 mg g−1) and rapid mass-transfer features (equilibration time: 2–3 min) for all tested FQs, consistent with Langmuir adsorption model. Subsequently, this material was employed as a magnetic solid-phase-extraction adsorbent for adsorption and detection of multiple FQs by combining with high performance liquid chromatography. The developed method exhibited good linearity for various FQs within the concentration range of 0.1–500 μg L−1, with low limit of detection (0.0605–0.1529 μg L−1) and limit of quantitation (0.2017–0.5097 μg L−1). Satisfactory recoveries (88.38–103.44%) were obtained when applied to spiked food samples, demonstrating the substantial potential of this Fe3O4@ZIF-8@SMIP material for rapid enrichment and identification for multiple FQs residues.

Simultaneous targeting and monitoring of free antigen and in-situ membrane antigen in prostate cancer cells via an aggregation-induced emission-based bifunctional probe

The precise clinical diagnosis of prostate cancer still presents inherent challenges, and usually a monitoring of multiple biomarkers is required. In this study, a new aggregation-induced emission (AIE)-based bifunctional strategy was developed for the simultaneous detection of prostate cancer-specific in situ membrane antigens (PSMA) and free antigens (PSA). First, a bifunctional fluorescent probe with double sensing sites (a PSA-specific sensing site and a PSMA-targeted ligand) was constructed. In the presence of PSA, it specifically binds to the PSA-specific sensing site of the probe, resulting in the restoration of the fluorescence signal, enabling linear sensing of PSA. For the detection of PSMA, the PSMA-targeted ligand modified on the probe can specifically recognize PSMA, inducing the aggregation of the AIE material and resulting in an enhanced fluorescence signal. Moreover, a liposome-based artificial cell was developed to simulate the real prostate cancer cell, and it was used to investigate the feasibility of monitoring the two types of antigens. Utilizing this bifunctional fluorescent strategy, a dual-analysis of free serum antigen biomarker of PSA and in-situ membrane antigen of PSMA was achieved. The assay exhibited a wide linearity range for PSA detection from 0.0001 to 0.1 μg/mL, with a low limit of detection (LOD) of 6.18 pg/mL. For PSMA, the obtained LOD is 8.79 pg/mL, with a linearity range from 0.0001 to 0.1 μg/mL. This strategy allows us to simultaneously assess the levels of two types of biomarkers in living human prostatic cancer cells, providing a highly accurate and selective tool for early screening and monitoring of prostatic cancer.

A sensitive intelligent point-of-care test method for tert-butylhydroquinone in edible oil via a test strip with a smartphone

Tert-butylhydroquinone (TBHQ) is easily overused or illegally added to edible oil and attracts a growing concern because of its cytotoxic, liver-damaging, and carcinogenic effects. Thus, a sensitive and intelligent point-of-care testing (iPOCT) method is developed to fulfill the on-site monitoring. This iPOCT method depended on a fluorescent immunochromatographic assay within 15 min. Under optimization, the limit of quantification (LOQ) was calculated as 0.03 μg mL-1. The iPOCT method provided a low limit of detection (LOD) of 0.02 μg mL−1, a wide linear range of 0.03–100 μg mL−1, and great selectivity. Recoveries by the spiking experiments ranged from 97.4% to 103.5% with relative standard deviations (RSDs) of 2.4%–4.9% in soybean, peanut, rapeseed, and corn oil samples. The results showed that the iPOCT method is highly consistent with the high-performance liquid chromatography (HPLC) method.

Surface plasmon resonance (EC-SPR) sensor based on molecularly imprinted strategy for the determination of stimulant modafinil in saliva samples

A highly sensitive and selective molecularly imprinted polymer-based electrochemical-surface plasmon resonance (MIP-based EC-SPR) sensor was developed for the determination of modafinil in saliva samples. The optimal MIPpy film was synthesized using a modafinil concentration of 1 mM and a constant potential electropolymerization method. The fabricated sensor exhibited a wide linear range (0.1 μM to 10 μM), low detection limits (LOD: 50 nM, LOQ: 170 nM), and high selectivity towards modafinil, with selectivity coefficients of 8.5, 6.2, and 12.7 for adrafinil, armodafinil, and caffeine, respectively. The sensor also demonstrated excellent reproducibility (RSD: 4.2 %) and long-term stability (92 % response after one month). Furthermore, the applicability of the sensor in real samples was validated using spiked saliva samples, with recovery values ranging from 94.7 % to 103.5 %. These results highlight the potential of the MIP-based EC-SPR sensor as a powerful tool for the rapid, sensitive, and selective detection of modafinil in complex biological matrices.

A ratiometric, turn-on fluorosensor for specific detection of Zn2+ ions

A potentially active fluorescent chemosensor (E)-2-(((2-(1H-benzo[d]imidazol-2-yl)phenyl)imino)methyl)-5-(diethylamino)phenol (BMDP) is developed by the condensation of 2-(2-aminophenyl)-1H-benzimidazole and 4-(diethylamino)salicylaldehyde. It shows an exceptional ratiometric fluorescence behavior when exposed to Zn2+ ions and the photoluminescence color is changed from blue to cyan under the exposure of a 365 nm UV light which is also strongly evident from the color chromaticity diagram. The exceptional ratiometric fluorescence behavior in the presence of Zn2+ ions is found to be due to the chelation-enhanced fluorescence (CHEF). The 1:1 stoichiometry of BMDP and Zn2+ ions in Zn2+ ions chelated BMDP complex is confirmed through Job’s plot analysis. Remarkably, Cd2+ does not interfere with the selective ratiometric fluorescence behavior induced by Zn2+ ions. The lowest detection limit and quantification limit are estimated to be 28 nM and 92 nM respectively. The cyan fluorescence of the Zn2+ ions chelated BMDP complex is interestingly reversed to the original BMDP in the presence of ethylenediamine tetraacetic acid (EDTA). At the molecular level, this can be thought of as a complimentary “INHIBIT” logic gate. Furthermore, it is possible to utilize the probe for on-site identification in test strips with improved Zn2+ ions selectivity. We have also used a smartphone-based method to demonstrate the usefulness of BMDP for the immediate quantification and detection of Zn2+ ions. In light of this, probe BMDP is a trustworthy fluorescence probe for on-site monitoring that can accurately identify Zn2+ ions even when some other metals and anions compete.