Low Lignin Research Articles

Intraspecific variability in plant and soil chemical properties in a common garden plantation of the energy crop Populus.

Optimizing crops for synergistic soil carbon (C) sequestration can enhance CO2 removal in food and bioenergy production systems. Yet, in bioenergy systems, we lack an understanding of how intraspecies variation in plant traits correlates with variation in soil biogeochemistry. This knowledge gap is exacerbated by both the heterogeneity and difficulty of measuring belowground traits. Here, we provide initial observations of C and nutrients in soil and root and stem tissues from a common garden field site of diverse, natural variant, Populus trichocarpa genotypes-established for aboveground biomass-to-biofuels research. Our goal was to explore the value of such field sites for evaluating genotype-specific effects on soil C, which ultimately informs the potential for optimizing bioenergy systems for both aboveground productivity and belowground C storage. To do this, we investigated variation in chemical traits at the scale of individual trees and genotypes and we explored correlations among stem, root, and soil samples. We observed substantial variation in soil chemical properties at the scale of individual trees and specific genotypes. While correlations among elements were observed both within and among sample types (soil, stem, root), above-belowground correlations were generally poor. We did not observe genotype-specific patterns in soil C in the top 10 cm, but we did observe genotype associations with soil acid-base chemistry (soil pH and base cations) and bulk density. Finally, a specific phenotype of interest (high vs low lignin) was unrelated to soil biogeochemistry. Our pilot study supports the usefulness of decade-old, genetically-variable, Populus bioenergy field test plots for understanding plant genotype effects on soil properties. Finally, this study contributes to the advancement of sampling methods and baseline data for Populus systems in the Pacific Northwest, USA. Further species- and region-specific efforts will enhance C predictability across scales in bioenergy systems and, ultimately, accelerate the identification of genotypes that optimize yield and carbon storage.

Genetic Variation and QTL Analysis of Crude Fibre and Quality Traits in the Doubled Haploid Winter Oilseed Rape (Brassica napus L.) Population R19 x Lord

ABSTRACTThe oil‐extracted meal of oilseed rape is used for feeding livestock and is a potential source of vegetable protein for human consumption. Its protein quality is limited by glucosinolates, phenolic compounds, phytates and crude fibres. The reduction of cellulose, hemicellulose and indigestible lignin in black‐seeded oilseed rape may enhance the protein content, colour, sensory quality and digestibility. The objective of this study was to analyse the inheritance of seed fibre components in relation to oil, protein and other quality traits in a DH population derived from the cross of low lignin lines R19 and cv. Lord. The population of 143 lines was tested in field experiments in six environments and was genotyped with Illumina 15K Brassica SNP chip. QTL and candidate genes were identified using the high‐quality long‐read reference genome of Express 617. Major QTL for fibre components were identified on chromosomes C01 and C03 with opposite additive and epistatic effects. Fibre QTL colocated with each other and QTL for seed colour, oil and protein. Epistatic effects were identified, which resulted in a further decrease of fibre content.

Beyond low lignin: Identifying the primary barrier to plant biomass conversion by fermentative bacteria.

Renewable alternatives for nonelectrifiable fossil-derived chemicals are needed and plant matter, the most abundant biomass on Earth, provide an ideal feedstock. However, the heterogeneous polymeric composition of lignocellulose makes conversion difficult. Lignin presents a formidable barrier to fermentation of nonpretreated biomass. Extensive chemical and enzymatic treatments can liberate fermentable carbohydrates from plant biomass, but microbial routes offer many advantages, including concomitant conversion to industrial chemicals. Here, testing of lignin content of nonpretreated biomass using the cellulolytic thermophilic bacterium, Anaerocellum bescii, revealed that the primary microbial degradation barrier relates to methoxy substitutions in lignin. This contrasts with optimal lignin composition for chemical pretreatment that favors high S/G ratio and low H lignin. Genetically modified poplar trees with diverse lignin compositions confirm these findings. In addition, poplar trees with low methoxy content achieve industrially relevant levels of microbial solubilization without any pretreatments and with no impact on tree fitness in greenhouse.

Exploring the constituents and thermal characteristics of miscanthus floridulus for biomass composites

Miscanthus floridulus (MF) possesses notable attributes including high photosynthetic efficiency, rapid growth, robust adaptability, and substantial biomass yield. It is widely researched in fields such as genetics, special materials, bioenergy, and ecological protection. However, the research on the addition of MF for biomass composites remains limited due to the absence of comprehensive analysis concerning the composition, internal molecular structure, and properties of MF. A thorough exploration of the fundamental properties of MF has the potential to broaden their advantages and facilitate the advancement of biomass. This investigation delves into the structural characterization and properties of MF, focusing on its stems, leaves, and tassels. Firstly, the primary constituents of MF comprise cellulose, hemicellulose, and lignin. Cellulose predominates in the stem, exhibiting the highest crystallinity, while lignin content peaks in the tassel with the lowest crystallinity. The leaf falls between these extremes in terms of crystallinity. Secondly, carbon and oxygen elements constitute over 95 % of MF's primary components, alongside trace elements like phosphorus and sulfur. Additionally, chemical structure of MF features abundant characteristic functional groups such as hydroxyl, carbonyl, and benzene rings. Studies indicate that samples with low hemicellulose and high lignin content demonstrate superior thermal stability. Consequently, the stem of MF exhibits optimal low-temperature thermal stability, while the tassel excels in high-temperature conditions. Finally, the data highlights a significant influence in the mechanical properties of polylactic acid materials upon the addition of MF. With a 5 % addition of MF, the tensile modulus and flexural strength of the PLA composite reached their optimal values of 933.91 MPa and 55.28±8.77 MPa, respectively. This research establishes a theoretical groundwork for integrating MF into biomass composite materials.

Xyloglucan endotransglucosylase-hydrolase 1 is a negative regulator of drought tolerance in barley via modulating lignin biosynthesis and stomatal closure

The projected increase in drought severity and duration worldwide poses a significant threat to crop growth and sustainable food production. Xyloglucan endotransglucosylase/hydrolases (XTHs) family is essential in cell wall modification through the construction and restructuring of xyloglucan cross-links, but their role in drought tolerance and stomatal regulation is still illusive. We cloned and functionally characterized HvXTH1 using genetic, physiological, biochemical, transcriptomic and metabolomic approaches in barley. Evolutionary bioinformatics showed that orthologues of XTH1 was originated from Streptophyte algae (e.g. some species in the Zygnematales) the closest clade to land plants based on OneKP database. HvXTH1 is highly expressed in leaves and HvXTH1 is localized to the plasma membrane. Under drought conditions, silencing HvXTH1 in drought-tolerant Tibetan wild barley XZ5 induced a significant reduction in water loss rate and increase in biomass, however overexpressing HvXTH1 exhibited drought sensitivity with significantly less drought-responsive stomata, lower lignin content and a thicker cell wall. Transcriptome profile of the wild type Golden Promise and HvXTH1-OX demonstrated that drought-induced differentially expressed genes in leaves are related to cell wall biosynthesis, abscisic acid and stomatal signaling, and stress response. Furthermore, overexpressing HvXTH1 suppressed both genes and metabolites in the phenylpropanoid pathway for lignin biosynthesis, leading to drought sensitivity of HvXTH1-OX. We provide new insight by deciphering the function of a novel protein HvXTH1 for drought tolerance in cell wall modification, stomatal regulation, and phenylpropanoid pathway for lignin biosynthesis in barley. The function of HvXTH1 in drought response will be beneficial to develop crop varieties adapted to drought.

High-solids saccharification of non-pretreated citrus peels through tailored cellulase

Citrus peels, characterized by their low lignin and high sugar content, have been drawing increasing attention as a valuable lignocellulosic biomass with significant potential in biorefinery. Notably, in this study, the citrus waste was found to be enzymatically accessible without any pretreatment. Moreover, to promote the high-solids saccharification of the citrus peels, a tailored cellulase cocktail was formulated by response surface methodology (RSM), along with a fed-batch strategy aiming to obtain a high substrate loading. The study resulted in an optimized cellulase cocktail (7.08 U/g DM of β-glucosidase, 164.17 U/g DM of hemicellulase, 47.38 mg/g DM of sophorolipid, and 64.68 mg/g DM of Tween 80) and achieved solids loading of 22 % with a total sugar concentration of 123.84 g/L, corresponding to a yield of 93.12 % (65.28 % in batch operation). These findings provided essential validation for the efficient utilization of citrus waste, ensuring them promising potential as feedstock for sugar platforms.

Designed synthesis of demethylated-hydroxymethylated lignin-based adsorbent for removal of Cr(VI) ions from wastewater

Lignin-based adsorbents for the removal of Cr(VI) ions have attracted intensive attention due to the advantages of renewability, biodegradablity, low cost and environmental friendliness. However, there are still a lot of challenges such as poor adsorption capacity, low lignin content in adsorbents, and harsh preparation conditions. Here, a tandem hydroxymethylation-demethylation method is proposed for preparing an excellent lignin-based Cr(VI) adsorbent (DHKL), which features with high lignin content (>85 wt%) and high hydroxyl content (up to 6.26 mmol/g) under milder conditions. The prepared DHKL exhibits an adsorption capacity reaching up to 1040.9 mg/g and can maintain this capacity even in the presence of other metal ions in the solution. Model analyses indicate that chemisorption occurring in a monolayer is the main process, which is spontaneous and endothermic. Structural changes of DHKL before and after adsorption indicated that Cr(VI) ions are mainly reduced to Cr(III) ions by hydroxyl groups with some of the absorbed Cr ions dispersed into the inner part of DHKL. Based on these results, the detailed possible adsorption mechanism is deduced, providing guidance for designing, producing and utilizing lignin-based adsorbents.

Enhancing reed cellulose conversion to glucose with octyl glucoside and tea saponin pretreatment

Low pretreatment temperatures are beneficial for enhancing the activity of both soluble lignin and lignin in pretreated solids. To achieve high-activity lignin and a higher glucose yield at a lower lignin removal rate and reduced enzymatic loading, the synergistic effects of octyl glucoside and tea saponin during low-temperature ammonia‑oxygen pretreatment and enzymatic hydrolysis were explored. Utilizing a moderated lignin extraction at 38 %, with pretreatment at 110 °C, and enriched with 1 % octyl glucoside and 0.06 g/g tea saponin, the biochemical conversion was galvanized. This manifested in an enzymatic hydrolysis efficiency of 96 % and a glucose yield in excess of 85 % at an enzyme loading of 5 FPU/g of pretreated-solids. Conversely, the lignin removal rate without surfactants was 26 %, resulting in 70 % hydrolysis efficiency even at a higher enzyme loading of 15 FPU/g of pretreated-solids. In order to minimize the pretreatment temperature and enzyme load as much as possible without affecting the efficiency of enzymatic hydrolysis and glucose yield, the goal of this research is to investigate the roles of octyl glucoside in the pretreatment process and tea saponin in the enzymatic hydrolysis process. This study provides a new approach for refining lignocellulosic biomass.

Utilization of duckweed-derived biomass for polyhydroxybutyrate production in Escherichia coli via dual enzymatic saccharification using amylase and cellulase complex.

Duckweed is a rapid-growing plant with a high starch and low lignin content. The duckweed was saccharified via dual enzymatic treatment using amylase and cellulase complex. The duckweed-derived glucose was utilized for polyhydroxybutyrate (PHB) production in engineered Escherichia coli. In addition, the low concentration supplementation of the duckweed extract promoted cell growth compared to the analytical grade glucose.

Novel Recycling, Defibrillation, and Delignification Methods for Isolating α-Cellulose from Different Lignocellulosic Precursors for the Eco-Friendly Fiber Industry.

Alpha-cellulose, a unique, natural, and essential polymer for the fiber industry, was isolated in an ecofriendly manner using eleven novel systems comprising recycling, defibrillation, and delignification of prosenchyma cells (vessels and fibers) of ten lignocellulosic resources. Seven hardwood species were selected, namely Conocorpus erectus, Leucaena leucocephala, Simmondsia chinensis, Azadirachta indica, Moringa perigrina, Calotropis procera, and Ceiba pentandra. Moreover, three recycled cellulosic wastes were chosen due to their high levels of accumulation annually in the fibrous wastes of Saudi Arabia, namely recycled writing papers (RWPs), recycled newspapers (RNPs), and recycled cardboard (RC). Each of the parent samples and the resultant alpha-cellulose was characterized physically, chemically, and anatomically. The properties examined differed significantly among the ten resources studied, and their mean values lies within the cited ranges. Among the seven tree species, L. leucocephala was the best cellulosic precursor due to its higher fiber yield (55.46%) and holocellulose content (70.82%) with the lowest content of Klasson lignin (18.86%). Moreover, RWP was the best α-cellulose precursor, exhibiting the highest holocellulose (87%) and the lowest lignin (2%) content. Despite the high content of ash and other additives accompanied with the three lignocellulosic wastes that were added upon fabrication to enhance their quality (10%, 11%, and 14.52% for RWP, RNP, and RC, respectively), they can be considered as an inexhaustible treasure source for cellulose production due to the ease and efficiency of discarding their ash minerals using the novel CaCO3-elimination process along with the other innovative techniques. Besides its main role for adjusting the pH of the delignification process, citric acid serves as an effective and environmentally friendly additive enhancing lignin breakdown while preserving cellulose integrity. Comparing the thermal behavior of the ten cellulosic resources, C. procera and C. pentandra exhibited the highest moisture content and void volume as well as having the lowest specific gravity, crystallinity index, and holocellulose content and were found to yield the highest mass loss during their thermal degradation based on thermogravimetric and differential thermal analysis in an inert atmosphere. However, the other resources used were found to yield lower mass losses. The obtained results indicate that using the innovative procedures of recycling, defibrillation, and delignification did not alter or distort either the yield or structure of the isolated α-cellulose. This is a clear indicator of their high efficiency for isolating cellulose from lignocellulosic precursors.

Silicon weakens the outer apoplastic barrier in roots of rice and delays its formation, resulting in increased Na+ and Cl− fluxes to the shoot

In rice, silicon can mitigate abiotic and biotic stresses. We therefore investigated the effect of Si on key root traits related to soil flooding and salinity tolerance with emphasis on the outer apoplastic barrier and cortical aerenchyma. We tested the hypothesis that Si application alters the phenotypic response of these root traits by growing rice in nutrient solutions without or with Si, designed to mimic drained or flooded soils. We measured the barrier strength through resistance to O2 and water of the outer parts of adventitious roots along with cortical aerenchyma and other root structural traits. We found that Si delayed the barrier formation and caused lower amounts of inducible cortical aerenchyma. The delay in barrier formation resulted in higher xylem loading of Na+ and Cl-, i.e., the sap flux of both ions was significantly higher for plants with access to Si. The increased ion fluxes correlated with lower lignin and suberin deposition in the outer part of the root. Consequently, we do not recommend using Si application to alleviate combined stress of salinity and soil flooding in rice, since the barrier was more permeable to O2, and the aerenchyma formation was less pronounced in roots with Si.

An eco-friendly enzymatic treatment to prepare spinnable banana fibers as an alternative to cotton for textile applications

Banana fibers are a sustainable material with natural mechanical strength and antibacterial properties. These fibers are extracted from the large amount of waste produced by banana pseudo stems annually. However, despite their numerous advantages, their stiffness and rough texture impede their full use in the textile. This research investigates the degumming treatment of banana fibers using enzyme combination and chemical methods to achieve spinnable soft banana fibers. An L9 orthogonal array was used in a Taguchi design of the experiment to optimize the process parameters. For enzyme combination degumming, the experimental setup comprised different quantities of hemicellulase, laccase, amylase, and pectinase; for chemical degumming, varied amounts of sodium hydroxide (NaOH) were used. The results indicate that enzyme-based degumming procedures produce better results than chemical treatments. Optimum enzyme combinations for various fiber qualities were found using the Taguchi design of experiments. These combinations included Hemicellulase 5 %, Laccase 5 %, Amylase 3 %, and Hemicellulase 5 %, Laccase 3 %, Pectinase 5 %. Without degrading the cellulose structure, these ideal enzyme combinations produced fibers with lower lignin content and higher cellulose percentages, moisture content, and tenacity values. By determining the most efficient enzyme combinations and their effects on fiber qualities, the study offers sustainable fiber processing methods for textile grade banana fiber.

Life cycle assessment of rice residue as the lightweight biocomposites for structural ceiling: A critical review

The research focuses on the sustainable utilization of rice residue for lightweight biocomposites, emphasizing the importance of pre-treatment methods like NaOH interventions on cellulose, hemicellulose, and lignin in rice residue. The balance in pre-treatment timing is crucial for maintaining the structural integrity of these components. Rice Husk Ash (RHA) stands out for its low heavy metal content and high refractoriness, making it versatile for various applications. Rice straw (RS), another component of rice residue, offers abundant cellulose and low lignin, making it suitable for biocomposite matrices. The study delves into extracting cellulose and CNCs from RS for eco-friendly packaging, targeted drug delivery, and high-quality composites. It also explores how advanced farming practices can reduce waste and enhance crop yields.

Preparation of Pulp, Microfibrillated Cellulose, and Paper Hand Sheets from Bakong (<i>Hanguana malayana</i> (Jack) Merr.)

Bakong (<i>Hanguana malayana</i> (Jack) Merr.) is a perennial herbaceous plant that grows abundantly in certain parts of the Philippines. This study investigates Bakong fibers' potential as a pulp source for papermaking. Furthermore, microfibrillated cellulose (MFC) produced from the fibers was used as an additive in the Bakong fiber-based hand sheets at 2%, 6%, and 10% w/w, and their effects on their strength properties were observed. The soda pulping method produced Bakong pulp with a total yield of 47.36%. Proximate chemical analysis showed that the method reduced the lignin content from 13.19% to 8.76%, and the resulting pulp was successfully formed into paper hand sheets. The strength properties of the hand sheets were tested, and the resulting burst index, tear index, tensile index, and folding endurance values were 5.98 kPa/m2∙g, 6.41 mN∙m2/g, 105.97 N∙m/g, and 626 double folds, respectively. Aside from the tear index, the Bakong hand sheets' strength properties were much higher than that of locally produced commercial printing paper. The addition of MFC on the hand sheets negatively affected the burst and tensile index values of the Bakong hand sheets but significantly improved the tear index up to 6% w/w. These results show that the pulp produced from the Bakong fibers can potentially be used as an alternative source of pulp for papermaking, but further optimization of the pulping process is recommended to increase the yield, lower lignin content, and improve compatibility with the MFC.

Production of lignin-containing nanocellulose from six types of unpretreated lignocellulosic biomass by a one-step process

Lignin-containing nanocellulose (LCN) shows great potential in the fabrication of high performance bio-based materials, and suitable raw materials may achieve the production of LCN in a more economical approach. Therefore, in this study, the morphology, chemical and supramolecular structure of six types of lignocellulosic biomass (Broussonetia papyrifera bark, moso bamboo, rattan, balsa wood, poplar wood and fir wood) were analyzed for the production of LCN by using pure oxalic acid dihydrate (OAD). The results revealed that BPBs is a natural available cellulose-rich materials with extremely high cellulose content, low lignin content, and loosely connected cellulose chains. Compared with the other five types of lignocellulosic biomass materials, the hydrolysis of BPBs without any pretreatments by using OAD produced higher yield of LCN with much more uniform size distribution and smaller size. LCN from BPBs had higher crystallinity and thermal stability than that from the other five lignocellulosic biomass. The finding in this study indicated that Broussonetia papyrifera bark without any pretreatment was a favored material for high yield production of LCN compared with the other woody materials, which provided an economically realizable method on the efficient and high yield production of LCN from unpretreated BPBs by using OAD hydrolysis.

Identification of the Key Gene DfCCoAOMT1 through Comparative Analysis of Lignification in Dendrocalamus farinosus XK4 and ZPX Bamboo Shoots during Cold Storage.

Dendrocalamus farinosus bamboo shoots, a species with rich nutritional value, are important in Southwest China. Lignin is an important factor affecting the postharvest flavor quality of bamboo shoots; however, the underlying mechanism of lignin deposition in D. farinosus bamboo shoots during cold storage is still not fully understood. In this study, the mutant D. farinosus XK4 with low lignin content at 3.11% and the cultivated variety ZPX at 4.47% were used as experimental materials. The lignin content of D. farinosus XK4 and ZPX, as well as the gene expression differences between them, were compared and analyzed during cold storage using transcriptomic and physiological methods. Our analysis revealed several key genes and found that D. farinosus CCoAOMT1 plays a key role in the regulatory network of bamboo shoots during cold storage. Tobacco heterologous transformation experiments demonstrated that overexpression of DfCCoAOMT1 significantly increases lignin content. This study provides a novel foundation for future research aimed at improving the postharvest quality and flavor of D. farinosus bamboo shoots through targeted genetic manipulation during cold storage.

“Blooming” of litter-mixing effects: the role of flower and leaf litter interactions on decomposition in terrestrial and aquatic ecosystems

Abstract. The diversity effect on decomposition, through the litter-mixing effects plays a central role in determining the nutrient and carbon dynamics in ecosystems. However, the litter-mixing effects are centered on a leaf litter perspective. Important aspects related to intraspecific interaction and biomass concentration are rarely evaluated, even though they could be essential to determine the litter decomposition dynamics. To our knowledge, we introduced a new perspective to evaluate whether and how the interaction between flower and leaf litter affects the occurrence, direction, and magnitude of litter-mixing effects in terrestrial and aquatic ecosystems. We performed laboratory experiments using flower and leaf litter from the yellow trumpet tree Tabebuia aurea (Silva Manso) Benth. and Hook. f. ex. S. Moore as a model. To obtain realistic results, we manipulated various scenarios of flower : leaf litter biomass proportion and measured 13 functional traits. Litter-mixing effects were consistent in both aquatic and terrestrial environments, with faster decomposition of both litter types in mixtures compared to their monocultures (synergistic effects). Litter-mixing effects were stronger in the terrestrial environment and at higher flower : leaf litter biomass proportions. Our results indicate that synergistic outcomes are mainly associated with complementary effects. Flower litter had a higher concentration of labile C compounds, N, P, and K and lower lignin concentrations, representing a labile litter, while leaf litter had a higher concentration of lignin, Ca, Mg, and Na, representing a refractory litter. Our results demonstrate the importance of litter-mixing effects between flower and leaf litter via complementary effects. These results shed light on the secondary consequences of flower litter on decomposition, suggesting that species with high reproductive investment in flower biomass may play an important role in the nutrient and carbon recycling of diverse plant communities, exerting a pivotal role in biogeochemical dynamics.

A comprehensive review of current progress in biofuel production using marine algae biomass

The world's fossil fuel resources are rapidly depleting as the global population grows and energy demands rise. Current fossil fuel supplies are insufficient to meet rising demand and are nearing depletion. Careless exploitation of fossil fuels increases greenhouse gas emissions, environmental pollution, and global warming, resulting in ecological imbalances and health risks. Consequently, contamination, rising temperatures, and high oil costs have fueled the search for renewable and alternative energy sources. This study seeks to explore renewable energy alternatives that are critical to meeting future global energy demands. Marine algae such as red algae, green algae, and brown algae are gaining popularity as economically viable and environmentally friendly sources of renewable biofuel. Several studies are currently underway to assess the ability of marine algae to produce a variety of bioproducts, including biofuels. Macroalgae, in particular, emerges as an ideal resource for biofuel production due to their lipid and carbohydrate content, coupled with low or absent lignin content. The article investigates the potential of marine algal species to promote biofuel production and discusses novel methods for improving biofuel yields. It also emphasizes the economic factors and challenges associated with sustainable biofuel production.

The effect of replacing conventional alfalfa hay with lower-lignin alfalfa hay on feed intake, nutrient digestibility, and energy utilization in lactating Jersey cows

Lower-lignin (LoL) varieties of alfalfa (Medicago sativa L.) have been developed in recent years, and have the potential to positively impact animal performance. The objective of this study was to evaluate the effects of increasing the proportion of LoL alfalfa hay in diets fed to lactating dairy cows. Research plots were planted with a conventional variety (CON; Dairyland Hybriforce 3400), and 2 LoL varieties (LLG; 54HVX42 and LLB; Aflorex HiGest 460). After harvest, the LoL varieties were blended in equal proportions for feeding. Twelve multiparous Jersey cows (100 ± 4 d in milk) were used in a 3 × 3 Latin square with 3 periods of 28 d. Cows were assigned to 3 diets containing 0 (CNTRL), 16.1 (MdLL), and 32.2% (HiLL) of the diet DM as LoL alfalfa hay, which replaced CON. The CON alfalfa had average CP, NDF, and lignin contents (DM basis) of 20.5 ± 1.15, 42.1 ± 1.37, and 6.81 ± 0.57%, respectively, while the LoL alfalfa averaged 19.8 ± 0.75, 39.9 ± 1.56, and 6.07 ± 0.28%, respectively. No difference was observed in DMI (20.4 ± 0.61 kg/d). No difference in milk yield was observed, averaging 31.0 ± 1.02 kg/d across treatments. Similarly, no difference was observed in ECM yield (averaging 36.2 ± 1.43 kg/d). Feed conversion (ECM/DMI) tended to increase linearly with LoL alfalfa inclusion (1.74 to 1.80 ± 0.03). No difference was observed for milk fat yield and content (1.39 ± 0.075 kg/d and 4.51 ± 0.219%) or milk protein yield and content (1.06 ± 0.041 kg/d and 3.43 ± 0.096%). Total methane production quadratically decreased from CNTRL to MdLL then increased to HiLL (441, 389, 412 ± 18.2 L/d, respectively). No differences were observed on total-tract digestibility of DM (averaging 67.2 ± 0.55%) and NDF (averaging 50.9 ± 1.56%). No difference was observed in the concentration of DE, ME or NEL was observed averaging 2.82 ± 0.021, 2.51 ± 0.027, and 1.72 ± 0.030 Mcal/kg respectively. Our results suggest that replacing CON alfalfa with LoL alfalfa has no effects on milk production, milk composition, or nutrient digestibility but may improve feed efficiency.

Preliminary Study on the Chemical Properties of Non-Oak Wood Species: Suitability for Wooden Barrel Production

Oak wood (Quercus spp.) is the traditional and widely utilized raw material for wooden barrels deployed for the maturation of alcoholic beverages. The chemical compounds, extractives, lignin, hemicellulose, and others, in the wood are claimed to significantly influence the sensory attributes of the beverages during the aging process. The study aimed to assess the chemical properties of non-oak wood species. These species include Sandoricum koetjape (Burm. f.) Merr., Swietenia macrophylla King, Acacia mangium Willd., and Eucalyptus camaldulensis Dehnh., which are all locally available. The investigation was prompted by the limited availability and exorbitant fees associated with the importation of oak barrels into the country. The chemical properties of these non-oak wood species were compared to those of Quercus alba. The effects of tree species (TS) and tree portions (TP) on the chemical properties were evaluated using different TAPPI and ASTM methods. Results showed that S. macrophylla had the highest solubilities with 29.12, 14.64, and 9.09% in 1% sodium hydroxide solution, hot water, and ethanol-cyclohexane, respectively – higher than the solubilities of Q. alba in the three solvents. Meanwhile, E. camaldulensis had the highest lignin content (23.82%), whereas S. koetjape had the lowest lignin and S. macrophylla had the highest hemicellulose content. Q. alba had higher lignin content than all the species studied. The species’ alpha-cellulose contents were lower than that of Q. alba, whereas their holocellulose values were higher. Overall, the effect of TP (top, middle, and bottom) on the chemical composition of each of the wood samples was determined to have little to no effect on the chemical properties, hence indicating a relatively homogeneous distribution of chemical components from top to bottom. On the other hand, TS highly significant effect on the wood species on all the chemical properties analyzed. Overall, locally available non-oak wood species could be suitable as a raw material for wooden barrel fabrication. However, there is a need to conduct further studies on their anatomical, physico-mechanical, and other chemical properties.