Low-coordinated Sites Research Articles

Activating copper by creating low-coordinated copper sites for antibiotic detoxification through Electrocatalytic hydrodechlorination reaction

Electrocatalytic hydrodehalogenation (ECHD) offers a sustainable venue for detoxifying halogenated antibiotics by converting CX (XBr, Cl and F) bonds to CH bonds. Metallic copper (Cu) is a promising catalyst with higher chemical stability compared to general cobalt-based catalysts but suffers from lower activity toward dilute antibiotic pollutants. Herein, we activated the Cu by creating numbers of low-coordinated Cu sites on skeleton surface of a Cu foam electrode (r-CF) through a stepwise calcination and electrochemical reduction (C-ER) process. The r-CF electrode demonstrated extraordinary activity in FLO removal with a mass activity of 3.3 gFLO h−1 m−2. More importantly, it achieved 100 % conversion of CCl bonds at a relatively mild potential of −0.30 V, outperforming pristine Cu foam electrode (64.6 %) and most reported catalysts. Mechanistic studies revealed that the low-coordinated Cu sites exhibited an upshift d band center towards Fermi level, which facilitated pollutant adsorption and electron transfer on these sites. Furthermore, the C-ER processing increased the roughness of the skeleton, enlarging the laminar region in the vicinity of active sites and enhancing the turbulent state around the electrode during ECHD. These dual enhancement contributed to the mass transfer of FLO from bulk solution to electrode and their stabilization at active sites. The r-CF was further applied to detoxify a FLO-contaminated lake water sample. It was able to reduce the antibacterial activity of the water by 81.7 %. This work offered a new approach to activate the Cu for ECHD, and demonstrated the promise of Cu-mediated ECHD for antibiotics contamination remediation.

Analysis of the OH Coverage on Low-Coordinated Pt Sites at Low Potentials

Analysis of the OH Coverage on Low-Coordinated Pt Sites at Low Potentials

Hexagonal boron nitride fibers as ideal catalytic support to experimentally measure the distinct activity of Pt nanoparticles in CO2 hydrogenation

Catalytic studies aim to design new catalysts to eliminate unwanted by-products and obtain 100 % selectivity for the preferred target product without losing activity. For this purpose, understanding the role of each component building up the catalyst is essential. However, determining the intrinsic catalytic activity of pure metals, especially precious metals in the CO2 hydrogenation reaction under ambient conditions is complex. This is because the catalyst supports used thus far always influence the catalytic process either directly or indirectly due to interface formation that modifies the electronic and morphological structure of the metals. Even SiO2, regarded as inert shows some activity owing to the hydroxyl groups on its surface. In this work, we propose chemically inert and defect-free hexagonal boron-nitride fibers (BNF) synthesized via a co-precipitation method with wide band gap and robust covalent bonds as an uncommon reference catalyst support to evaluate the catalytic activity of size-controlled Pt nanoparticles (4.7 ± 0.6 nm) in the hydrogenation of CO2. The fibers alone show no catalytic activity; however, Pt/BNF exhibited low but notable activity of 377 nmol/g at 400 °C and the catalyst can achieve nearly 100 % CO selectivity. X-ray photoelectron spectroscopy, transmission electron microscopy, and diffuse reflectance infrared Fourier transform spectroscopy measurements were used to indicate that hexagonal boron-nitride affects neither the metal nanoparticles nor the reaction itself; the measured catalytic activity stems from the activity of Pt deposites without the effect of the support, as they were alone. CO vibration spectroscopy studies suggest that due to the lack of substrate-metal interaction, Pt nanoparticles adopt an ideal spherical structure, resulting in several low coordination sites capable of CO2 conversion. Thus, BNF is proposed in the present article to be used as a reference catalyst support material. It can be efficiently used in investigations involving the proposed metal and reaction or under varying conditions with different metal nanoparticles and reaction systems.

Reactivity of Polynuclear Niobium Oxynitride Cluster Anions Nb4N5-xOx - (x=0-5) toward N2.

The activation of N₂ under mild conditions remains a significant challenge in chemistry. Understanding how the composition of ligands modulates the reactivity of metal centers is pivotal for the rational design of efficient catalysts for nitrogen fixation. Herein, the reactions between polynuclear niobium oxynitride anions Nb4N5-xOx - (x=0-5) and N2 were investigated by employing mass spectrometry, photoelectron imaging spectroscopy, and theoretical calculations. The rate constants of Nb4N5-xOx -/N2 gradually decrease for x=0 to x=4, and then increase again for x=5. The sharp increase of the rate constants of Nb4O5 -/N2 corresponds to a decrease in the electron detachment energy of the Nb4O5 - cluster in the photoelectron spectroscopic experiments. Theoretical calculations suggest that the low-coordinated Nb-Nb sites in Nb4N5-xOx - (x=0-5) behaves as the active centers to bind N2 in the side-on/end-on manner. Mechanistic analysis reveals that reducing the N/O ratio leads to higher electron densities on the active Nb-Nb centers and decreased positive charge on the metal atoms, which hinders the approach of N2 to the clusters. This finding discloses fundamental insights into the impact of N/O ratio in fine-tuning the reactivity of metal centers toward N2 adsorption in related catalytic processes.

Structure sensitivity in the formic acid-driven catalytic transfer hydrogenation of maleic acid to succinic acid over Pd/C catalysts

A series of carbon-supported palladium catalysts (Pd/C) with average particle size in the range from 3 to 7 nm was prepared by varying the Pd loading. These materials and the influence of their physicochemical properties in the catalytic transfer hydrogenation (CTH) of maleic acid (MAc) to succinic acid (SAc) using formic acid (FAc) as H2 donor were evaluated. The chemical, textural, and surface properties were studied by a number of characterization techniques (ICP-OES, XRD, TEM, and XPS). It was found that the intrinsic rate of SAc formation per surface Pd atom (turn-over frequency, TOF Pdsur) is structure-sensitive. The TOF Pdsur rate increases with the particle size following a volcano-type curve, reaching a maximum for an average particle size of ca. 6 nm. Assuming a cuboctahedral shape with a cubic close-packed structure, an approximation frequently adopted for Pd particles, it was found that, for the series of catalysts, neither the calculated TOF of Pd surface atoms at low coordination sites nor at high coordination are constant. This suggests that no geometric effect is responsible for the structure-sensitivity. Among the different Pd species present in the catalysts (i.e., metallic Pd (Pd0), palladium carbide (PdCx), and oxidized Pd), it was observed that the relative number of surface Pd0 sites also follows a volcano-type curve, which indicates that Pd0 sites are necessarily involved in the most active centers. For particles with an average size larger than 4 nm, the TOF rate of surface Pd0 sites was constant and in the range of 0.12 s−1. For smaller sizes, a more accurate determination of their Pd0 surface concentration is required to obtain reliable surface Pd0 TOF rates.

Insights into the dynamics of supported Au nanoparticles in the wet environments from first-principles and ReaxFF MD simulations

The interactions between metal and oxide supports have been widely studied, where the size effect of metal nanoparticles (NPs) and the gas environment play critical roles in catalytic performance. We employed density functional theory and ReaxFF reactive force field to investigate the size dependent properties of gold NPs supported on cerium dioxide, such as structural dynamics, adsorption, and electronic properties under wet environments. Distinct dynamic behaviors were observed in wet environments compared to vacuum conditions. In the wet environments, the hydroxide (OH) species preferentially adsorbs on the low coordination sites, such as edge sites, of NPs. This selective absorption induces a reconstruction effect on small NPs. Moderate-sized NPs exhibit significant surface reconstruction due to abundant OH adsorption at interface sites. However, this effect is negligible in larger NPs. A high interfacial population of OH significantly contributes the high catalytic performance of moderate-sized NPs. Moreover, OH adsorption modulates the charge distribution within the NPs, leading to their stabilization through OH-induced charge transfer. These findings provide insights into understanding and optimizing reactions in wet environments, offering a foundation for the development of more effective catalyst.

Selective Oxidation of Methanol to Methyl Formate on Gold: The Role of Low-Coordinated Sites Revealed by Isothermal Pulsed Molecular Beam Experiments and AIMD Simulations.

To elucidate the role of low-coordinated sites in the partial methanol oxidation to methyl formate (MeFo), the isothermal reactivity of flat Au(111) and stepped Au(332) in pulsed molecular beam experiments was compared for a broad range of reaction conditions. Low-coordinated step sites were found to enhance MeFo selectivity, especially at low coverage conditions, as found at higher temperatures. The analysis of the transient kinetics provides evidence for the essential role of Au x O y phases for MeFo formation and the complex interplay of different oxygen species for the observed selectivity. Ab initio molecular dynamic simulations yielded microscopic insights in the formation of Au x O y phases on flat and stepped gold surfaces emphasizing the role of low-coordinated sites in their formation. Moreover, associated surface restructuring provides atomic-scale insights which align with the experimentally observed transient kinetics in MeFo formation.

Directional Construction of Low-Coordination Fe-N3 Coupled with Intrinsic Carbon Defects for High-Efficiency Oxygen Reduction.

Regulating the coordination environment of Fe-Nx sites is an efficient but challenging approach for promoting the intrinsic catalytic activity of single-atom Fe/N-codoped carbon (Fe-N-C) toward the oxygen reduction reaction (ORR). Herein, low-coordination Fe-N3 sites coupled with carbon vacancies (Fe-N3/CV) are directionally constructed in Fe-N-C via pyrolysis of a metal-organic framework (MOF) precursor with N3-Zn-O-Fe moieties, which are delicately prefabricated by chemically anchoring Fe3+ onto a H2O-etching induced linker-missing Zn-N3 site in the MOF precursor. The optimized Fe-N-C with the Fe-N3/CV sites displays a high ORR half-wave potential of 0.92 V (vs RHE), which is attributed to the optimized electronic structure and binding strengths of the active Fe center toward the ORR intermediates stemming from the synergy of the asymmetric configuration of Fe-N3 as well as the adjacent carbon vacancies. This work could be enlightening for the design and construction of high-activity coupling sites in metal and nitrogen-codoped carbon catalysts.

High-efficiency C3 electrosynthesis on a lattice-strain-stabilized nitrogen-doped Cu surface

The synthesis of multi-carbon (C2+) fuels via electrocatalytic reduction of CO, H2O using renewable electricity, represents a significant stride in sustainable energy storage and carbon recycling. The foremost challenge in this field is the production of extended-chain carbon compounds (Cn, n ≥ 3), wherein elevated *CO coverage (θco) and its subsequent multiple-step coupling are both critical. Notwithstanding, there exists a “seesaw” dynamic between intensifying *CO adsorption to augment θco and surmounting the C-C coupling barrier, which have not been simultaneously realized within a singular catalyst yet. Here, we introduce a facilely synthesized lattice-strain-stabilized nitrogen-doped Cu (LSN-Cu) with abundant defect sites and robust nitrogen integration. The low-coordination sites enhance θco and concurrently, the compressive strain substantially fortifies nitrogen dopants on the catalyst surface, promoting C-C coupling activity. The n-propanol formation on the LSN-Cu electrode exhibits a 54% faradaic efficiency and a 29% half-cell energy efficiency. Moreover, within a membrane electrode assembly setup, a stable n-propanol electrosynthesis over 180 h at a total current density of 300 mA cm−2 is obtained.

Morphology-Dependent Interaction between Tetraphenylporphyrins and a Metal Oxide Surface: Electronic Signature, Photo Physics, and Chemical Interaction

Porphyrin-substrate hybrid systems are the building blocks in a series of materials, such as organic light-emitting diodes, chemical sensors, dye-sensitized solar cells and catalysts. Functional layers and 2D nanostructures on surfaces enable sensors, and nanoscale optical and magnetic materials. 3D porphyrin structures are for instance used in controlling and manipulating light at subwavelength dimensions. Understanding and correctly describing the way molecules interact with the substrate and in thin-film structures gives a handle on geometrical and electronic device properties. Indeed, adsorption and film-formation have a relevant effect on the molecular electronic structure even in the absence of strong covalent bonding, namely in terms of level-alignment with substrate states in the former and polarization-induced renormalization of molecular band gaps in the latter.Using the case of Co(II)-tetraphenylporphyrin (CoTPP) on the MgO(100), we shine light on the adsorption at morphology-related low-coordinated surfaces sites and the effect of multilayer film formation from a theoretical perspective in a frame work of hybrid density functional theory and many-body perturbation theory. We simulate the photoemission spectra for relevant adsorption sites as a fingerprint with distinct site-related features in both valence and core-level regions of the electronic structure that are also observed in experiments on MgO(100) films on Ag(100) and thus aid the identification of sites. Effects of the formation of porphyrin films on the electronic and optical properties will be outlined for H2TPP and MgTPP.We also highlight the self-metalation of H2TPP at morphology-related low-coordinated sites. Metalation is an important pathway for functionalization of porphyrin-based organic-inorganic structures. We address the self-metalation mechanism using ab initio molecular dynamics simulation at room temperature. While H2TPP is mobile on the pristine surface as the steric hindrance by phenyl rings prevents the physisorption of the macrocycle at a specific site, step edges or kink sites provide anchor points exposing low-coordinated, reactive oxygen-sites to hydrogens of the macrocycle. We report a spontaneous proton transfer at these sites forming an intermediate complex before the metalation occurs. This highlights the role of low-coordinated surface sites for the chemical interaction with the porphyrin.

Site-Selective Deposition of Silica Nanoframes and Nanocages onto Faceted Gold Nanostructures Using a Primer-free Tetraethyl Orthosilicate Synthesis.

The Stöber method for forming spherical silica colloids is well-established as one of the pillars of colloidal synthesis. In a modified form, it has been extensively used to deposit both porous and protective shells over metal nanomaterials. Current best-practice techniques require that the vitreophobic surface of metal nanoparticles be primed with a surface ligand to promote silica deposition. Although such techniques have proved highly successful in forming core-shell configurations, the site-selective deposition of silica onto preselected areas of faceted metal nanostructures has proved far more challenging. Herein, a primer-free TEOS-based synthesis is demonstrated that is capable of forming architecturally complex nanoframes and nanocages on the pristine surfaces of faceted gold nanostructures. The devised synthesis overcomes vitreophobicity using elevated TEOS concentrations that trigger silica nucleation along the low-coordination sites where gold facets meet. Continued deposition sees the emergence of a well-connected frame followed by the lateral infilling of the openings formed over gold facets. With growth readily terminated at any point in this sequence, the synthesis distinguishes itself in being able to achieve patterned and tunable silica depositions expressing interfaces that are uncorrupted by primers. The so-formed structures are demonstrated as template materials capable of asserting high-level control over synthesis and assembly processes by using the deposited silica as a mask that deactivates selected areas against these processes while allowing them to proceed elsewhere. The work, hence, extends the capabilities and versatility of TEOS-based syntheses and provides pathways for forming multicomponent nanostructures and nanoassemblies with structurally engineered properties.

Defect-Rich CuZn Nanoparticles for Model Catalysis Produced by Femtosecond Laser Ablation.

Femtosecond laser ablation of Cu0.70Zn0.30 targets in ethanol led to the formation of periodic surface nanostructures and crystalline CuZn alloy nanoparticles with defects, low-coordinated surface sites, and, controlled by the applied laser fluence, different sizes and elemental composition. The Cu/Zn ratio of the nanoparticles was determined by energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and selected area electron diffraction. The CuZn nanoparticles were about 2-3 nm in size, and Cu-rich, varying between 70 and 95%. Increasing the laser fluence from 1.6 to 3.2 J cm-2 yielded larger particles, more stacking fault defects, and repeated nanotwinning, as evident from high-resolution transmission electron microscopy, aided by (inverse) fast Fourier transform analysis. This is due to the higher plasma temperature, leading to increased random collisions/diffusion of primary nanoparticles and their incomplete ordering due to immediate solidification typical of ultrashort pulses. The femtosecond laser-synthesized often nanotwinned CuZn nanoparticles were supported on highly oriented pyrolytic graphite and applied for ethylene hydrogenation, demonstrating their promising potential as model catalysts. Nanoparticles produced at 3.2 J cm-2 exhibited lower catalytic activity than those made at 2.7 J cm-2. Presumably, agglomeration/aggregation of especially 2-3 nm sized nanoparticles, as observed by postreaction analysis, resulted in a decrease in the surface area to volume ratio and thus in the number of low-coordinated active sites.

Atomistic insights from DFT calculations into the catalytic properties on ceria-lanthanum clusters for methane activation.

Improving the catalytic performance of materials based on cerium oxide (CeO2) for the activation of methane (CH4) can be achieved through the following strategies: mixture of CeO2 with different oxides (e.g., CeO2-La2O3) and the use of particles with different sizes. In this study, we present a theoretical investigation of the initial CH4 dehydrogenation on (La2Ce2O7)n clusters, where n = 2, 4, and 6. Our framework relies on density functional theory calculations combined with the unity bond index-quadratic exponential potential approximation. Our results indicate that chemical species arising from the first dehydrogenation of CH4, that is, CH3 and H, bind through the formation of C-O and H-O bonds with the clusters, respectively. The coordination of the adsorption site and the chemical environment plays a crucial role in the magnitude of the adsorption energy; for example, species adsorb more strongly in the low-coordinated topO sites located close to the La atoms. Thus, it affects the activation energy barrier, which tends to be lower in configurations where the adsorption of the chemical species is stronger. During CH4 dehydrogenation, the CH3 radical can be present in a planar or tetrahedral configuration. Its conformation changes as a function of the charge transference between the molecule and the cluster, which depends on the CH3-cluster distance. Finally, we analyze the effects of the Hubbard effective parameter (Ueff) on adsorption properties, as the magnitude of localization of Ce f-states affects the hybridization of the interaction between the molecule and the clusters and hence the magnitude of the adsorption energies. We obtained a linear decrease in the adsorption energies by increasing the Ueff parameter; however, the activation energy is only slightly affected.

Low-coordinated copper facilitates the *CH2CO affinity at enhanced rectifying interface of Cu/Cu2O for efficient CO2-to-multicarbon alcohols conversion

The carbon−carbon coupling at the Cu/Cu2O Schottky interface has been widely recognized as a promising approach for electrocatalytic CO2 conversion into value-added alcohols. However, the limited selectivity of C2+ alcohols persists due to the insufficient control over rectifying interface characteristics required for precise bonding of oxyhydrocarbons. Herein, we present an investigation into the manipulation of the coordination environment of Cu sites through an in-situ electrochemical reconstruction strategy, which indicates that the construction of low-coordinated Cu sites at the Cu/Cu2O interface facilitates the enhanced rectifying interfaces, and induces asymmetric electronic perturbation and faster electron exchange, thereby boosting C-C coupling and bonding oxyhydrocarbons towards the nucleophilic reaction process of *H2CCO-CO. Impressively, the low-coordinated Cu sites at the Cu/Cu2O interface exhibit superior faradic efficiency of 64.15 ± 1.92% and energy efficiency of ~39.32% for C2+ alcohols production, while maintaining stability for over 50 h (faradic efficiency >50%, total current density = 200 mA cm−2) in a flow-cell electrolyzer. Theoretical calculations, operando synchrotron radiation Fourier transform infrared spectroscopy, and Raman experiments decipher that the low-coordinated Cu sites at the Cu/Cu2O interface can enhance the coverage of *CO and adsorption of *CH2CO and CH2CHO, facilitating the formation of C2+ alcohols.

Restructuring of Palladium Nanoparticles during Oxidation by Molecular Oxygen.

An interplay between Pd and PdO and their spatial distribution inside the particles are relevant for numerous catalytic reactions. Using in situ time-resolved X-ray absorption spectroscopy (XAS) supported by theoretical simulations, a mechanistic picture of the structural evolution of 2.3nm palladium nanoparticles upon their exposure to molecular oxygen is provided. XAS analysis revealed the restructuring of the fcc-like palladium surface into the 4-coordinated structure of palladium oxide upon absorption of oxygen from the gas phase and formation of core@shell Pd@PdO structures. The reconstruction starts from the low-coordinated sites at the edges of palladium nanoparticles. Formation of the PdO shell does not affect the average Pd‒Pd coordination numbers, since the decrease of the size of the metallic core is compensated by a more spherical shape of the oxidized nanoparticles due to a weaker interaction with the support. The metallic core is preserved below 200°C even after continuous exposure to oxygen, with its size decreasing insignificantly upon increasing the temperature, while above 200°C, bulk oxidation proceeds. The Pd‒Pd distances in the metallic phase progressively decrease upon increasing the fraction of the Pd oxide due to the alignment of the cell parameters of the two phases.

Effect of crystal facets in plasmonic catalysis

While the role of crystal facets is well known in traditional heterogeneous catalysis, this effect has not yet been thoroughly studied in plasmon-assisted catalysis, where attention has primarily focused on plasmon-derived mechanisms. Here, we investigate plasmon-assisted electrocatalytic CO2 reduction using different shapes of plasmonic Au nanoparticles - nanocube (NC), rhombic dodecahedron (RD), and octahedron (OC) - exposing {100}, {110}, and {111} facets, respectively. Upon plasmon excitation, Au OCs doubled CO Faradaic efficiency (FECO) and tripled CO partial current density (jCO) compared to a dark condition, with NCs also improving under illumination. In contrast, Au RDs maintained consistent performance irrespective of light exposure, suggesting minimal influence of light on the reaction. Temperature experiments ruled out heat as the main factor to explain such differences. Atomistic simulations and electromagnetic modeling revealed higher hot carrier abundance and electric field enhancement on Au OCs and NCs than RDs. These effects now dominate the reaction landscape over the crystal facets, thus shifting the reaction sites when comparing dark and plasmon-activated processes. Plasmon-assisted H2 evolution reaction experiments also support these findings. The dominance of low-coordinated sites over facets in plasmonic catalysis suggests key insights for designing efficient photocatalysts for energy conversion and carbon neutralization.

Partial Oxidation of Methanol on Gold: How Selectivity Is Steered by Low-Coordinated Sites.

Partial methanol oxidation proceeds with high selectivity to methyl formate (MeFo) on nanoporous gold (npAu) catalysts. As low-coordinated sites on npAu were suggested to affect the selectivity, we experimentally investigated their role in the isothermal selectivity for flat Au(111) and stepped Au(332) model surfaces using a molecular beam approach under well-defined conditions. Direct comparison shows that steps enhance desired MeFo formation and lower undesired overoxidation. DFT calculations reveal differences in oxygen distribution that enhance the barriers to overoxidation at steps. Thus, these results provide an atomic-level understanding of factors controlling the complex reaction network on gold catalysts, such as npAu.

Identification of the active sites for CO2 methanation over Re/TiO2 catalysts

CO2 methanation on heterogeneous catalysts holds great significance in achieving the net-zero emission target. However, understanding the atomic-scale relationship between reactivity and active site has been a subject of debate. The study investigated CO2 methanation reaction catalyzed by Re/TiO2 catalysts and identified the active site distribution and its relationship with reactivity. The low-coordinated edge sites of Re nanoparticle were found to be the active sites where CO2 dissociated into CO via a carbide pathway and subsequently hydrogenated to form methane. Furthermore, the study revealed that the size of Re nanoparticle influenced the distribution of active edge sites and affected the reactivity and stability of the CO intermediate, which was the rate-determining step in CO2 methanation reaction. Controlling the size and structure of Re nanoparticle can, therefore, enhanced the activity and efficiency of CO2 methanation reaction. The identification of these active sites and the insights gained from this study have significant implications for the mechanistic understanding and optimization of CO2 methanation over Re/TiO2 catalysts. It provides a basis for designing more effective catalysts to facilitate the conversion of CO2 to methane, thereby contributing to the goal of achieving net-zero emissions.

Self-Limited Formation of Cobalt Nanoparticles for Spontaneous Hydrogen Production through Hydrazine Electrooxidation.

Hydrogen (H2) has emerged as a highly promising energy carrier owing to its remarkable energy density and carbon emission-free properties. However, the widespread application of H2 fuel has been limited by the difficulty of storage. In this work, spontaneous electrochemical hydrogen production is demonstrated using hydrazine (N2H4) as a liquid hydrogen storage medium and enabled by a highly active Co catalyst for hydrazine electrooxidation reaction (HzOR). The HzOR electrocatalyst is developed by a self-limited growth of Co nanoparticles from a Co-based zeolitic imidazolate framework (ZIF), exhibiting abundant defective surface atoms as active sites for HzOR. Notably, these self-limited Co nanoparticles exhibit remarkable HzOR activity with a negative working potential of -0.1V (at 10mA cm-2) in 0.1m N2H4/1m KOH electrolyte. Density functional theory (DFT) calculations are employed to validate the superior performance of low-coordinated Co active sites in facilitating HzOR. By taking advantage of the potential difference between HzOR and the hydrogen evolution reaction (HER), a novel HzOR||HER electrochemical system is developed to spontaneously produce H2 without external energy input. Overall, the work offers valuable guidance for developing active HzOR catalyst. The novel HzOR||HER electrochemical system represents a promising and innovative solution for energy-efficient hydrogen production.

Steering N/S coordination number to accelerate catecholase-like catalysis over low-coordinated Cu site.

Modulation of coordination configuration is crucial for boosting the biomimetic catalytic activity of nanozymes, but remains challenging. Here, we found that the non-first-shell amino group in the ligand was capable of steering the N/S coordination number through remote induction to enable the formation of a low-coordinated CuN2S1 configuration. This endowed the resulting nanozyme (ATT-Cu) with an upshifted d-band center compared with a control nanozyme (TT-Cu) with CuN1S3 configuration, enhancing the adsorption capabilities of ATT-Cu for O2 and H2O2 intermediates as well as its affinity for catechol. Additionally, the low-coordinated CuN2S1 configuration caused more charges to accumulate at the atomic Cu site, which improved the capabilities of ATT-Cu for both donating electrons to oxygen-related species and accepting electrons from catechol. As a result, this ATT-Cu nanozyme with a low-coordinated CuN2S1 moiety presented a faster initial oxygen reduction step, which in turn accelerated catechol oxidation, thus greatly boosting the catecholase-like activity of ATT-Cu that exceeded those of many catecholase-mimicking artificial enzymes/nanozymes with Cu-N x O y sites as well as those of Ce-based, Zr-based and Pt-based nanozymes.