Low Catalyst Loading Research Articles

Ni‐Catalyzed [2+2+2] Cycloaddition of Alkynes To Form Arenes and Pyridines at Low Catalyst Loadings

AbstractWe report the Ni‐catalyzed cyclotrimerization of terminal alkynes at very low loadings of catalysts (0.05 mol% for all substrates). The nickel catalyst containing a terphenyl phosphine ligand allows carrying out the reactions at room temperature in only 30 min, providing the arene products as a single regioisomer in most cases. The Ni complex is also competent for the synthesis of polysubstituted pyridines through the cycloadditions of diynes and nitriles at mild temperatures (25 ° or 50 °C) and low Ni loadings (1 mol%). Experimental data and computational studies support the involvement of monoligated PNi species in all fundamental steps of the catalytic cycle.

Chalcogen‐Bonding Catalyzed in situ Trityl Cation Activation for C‐C Bond Forming Reactions

In this work, the use of chalcogen‐bonding for the catalytic activation of trityl cation by chloride abstraction from bench stable trityl chloride and further application in C‐C bond forming reactions is reported. In particular, telluronium salts bearing non‐coordinative counteranions such as BArF24 proved highly efficient. Thus, low catalyst loading of 1 mol% allows for the trapping of the in situ generated trityl cation in a Friedel‐Crafts reaction, as well as its use as catalyst in the carbonyl‐ene cyclization of citronellal or as hydride‐type oxidant in diastereoselective C‐H functionalization/cyclization of tetrahydroisoquinoline derivatives. A new family of chiral chalcogen‐triazolium salts presenting the chirality in the central backbone was also designed and employed in the C‐H functionalization reaction, slightly outperforming hydrogen and halogen bonding activation. Although no appreciable chirality transfer was achieved so far, those simple and modular structures might open new possibilities towards enantioselective chalcogen catalysis.

Fe(III)‐Catalyzed Intramolecular Hydroamination of 1,3‐Dienes Improved by Using Triphenylphosphate as an Additive

AbstractWe herein report that the combination of Fe(OTf)3 and triphenylphosphate (TPP, (PhO)3PO) has proven to be an effective catalyst for the intramolecular hydroamination of amino‐1,3‐dienes with an efficiency and scope superior to previously reported methods. This catalytic system demonstrated consistent performance with diverse aminodienes as well as aminoolefins, providing five‐ to seven‐membered N‐heterocycles. We propose a Lewis/Brønsted acid cocatalysis mechanism involving proton transfer through hydrogen bonding with TPP. Catalyst system consisting of inexpensive and nontoxic iron salt and phosphate additive, relatively low loading and recyclability of catalyst, and rapid and high‐yielding reaction are the advantages of this protocol.

Synthesizing Lactic Acid by the Manganese‐Catalyzed Dehydrogenative Coupling of Ethylene Glycol and Methanol

Herein, an efficient and green procedure for the synthesis of lactic acid via the dehydrogenative coupling of ethylene glycol with methanol is reported. The reaction is carried out under mild conditions in the presence of a catalytic amount of CyPNP‐Mn as the catalyst and tBuOK as the base, and is an example of the deoxygenative coupling of a lower alcohol to form lactic acid via elegant metal–ligand cooperation with a homogeneous non‐noble‐metal catalyst in >99% conversion and selectivity. This transformation proceeds at low catalyst loading (0.00625 mol%) with a high turnover number (TON) of up to 6080 for lactic acid.

Divergent Annulations of 5,6‐Dihydro‐4H‐1,2‐Oxazine N‐Oxides and Enol Diazoacetates for the Switchable Chemoselective Synthesis of Fused 1,2‐Oxazine Derivatives

AbstractReactions of 5,6‐dihydro‐4H‐1,2‐oxazine N‐oxides with enol diazoacetates were studied. A particular reaction path depends on the amount of catalyst and the order of the addition of the substrates. Use of Rh2(Oct)4 (2 mol.%) leads to chemoselective [3+3]‐annulation producing 1,2‐oxazine‐fused 1,2‐oxazine derivatives. With lower catalyst loadings (0.03 mol.%) enol diazoacetates are converted to cyclopropene derivatives, which in situ react with 1,2‐oxazine N‐oxides via tandem [3+2]‐cycloaddition‐rearrangement producing oxazine‐fused aziridines. Both transformations showed a wide substrate scope and produced target products with good yields and diastereoselectivity, thus allowing selective preparation of these rare heterocyclic systems. A mechanistic rationale for observed chemo‐ and stereo‐ selectivities was proposed.

Au(I)-Catalyzed Regioselective Hydrogen Isotope Labeling of Indoles.

The gold(I)-catalyzed hydrogen isotope exchange reaction on indoles and related heterocycles is described under mild conditions and low catalyst loadings, using CD3OD and D2O as readily available deuterium sources. C3-unsubstituted indoles are labeled at the C3 position with exquisite regioselectivity, while C3-substituted indoles are labeled at the C2 position. The method is also applicable to the regioselective tritiation of indoles. Mechanistic studies revealed the involvement of aurated indoles as key intermediates.

Synthesis of Functionalized Cycloheptadienones Starting from Phenols and Using a Rhodium/Boron Asymmetric Catalytic System.

Skeletal editing offers a unique route to assemble complex architectures from simple feedstocks that are otherwise difficult to obtain. However, the asymmetric version of skeletal editing has not been widely studied. Herein, we present a modular rhodium/boron asymmetric catalytic system that enables ring-expansion of phenols with cyclopropenes to synthesize highly functionalized cycloheptadienones in excellent chemo- and regioselectivities. This unique protocol features with low-catalyst loading, atom and step-economies, and mild neutral reaction conditions. Isotope-labelling experiments and DFT calculations have been conducted to reveal that boron reagent plays a vital role in the whole catalytic cycle.

Green Synthesis, Characterization, and Catalytic Applications of CuO Nanoparticles Using Prosopis Cineraria Seed Extract

Abstract The current study used a seed extract of Prosopis cineraria as a stabilizing and reducing agent to produce CuO nanoparticles via an easy, low-cost, affordable, and environmentally friendly synthesis process. The formation of copper oxide nanoparticles and the maximum absorbance of the CuO nanoparticles produced in the solution at 565 nm were verified by UV-vis. Copper oxide nanoparticles were found to have secondary metabolites on their surface, as shown by a distinctive Cu-O stretching band at 532 cm−1, which confirmed the reduced Cu2+ ions in copper oxide nanoparticles. This was confirmed by FTIR analysis. The XRD analysis confirmed the produced copper oxide nanoparticles’ monoclinic crystalline nanostructure with an average particle size of 34 nm. The phytonutrients in Prosopis cineraria seed extract stabilized and reduced copper, as demonstrated by the existence of copper and oxygen atoms at 85.2% and 12.5%, respectively, as demonstrated by SEM-EDX analysis. According to the HR-TEM study, copper oxide nanoparticles with a mean size of 18 nm are spherical in shape and well distributed. Prosopis cineraria seed extract-derived copper oxide nanoparticles were utilized as a catalyst in the Ullmann process to produce diphenyl ether. CuO nanoparticles produced by Prosopis cineraria seed extraction as a catalyst yielded 91% diphenyl ether. The results showed that a more ecologically friendly way of synthesizing copper oxide nanoparticles with great homogeneity of particle sizes could be achieved using seed extract. This work aims to facilitate heterogeneous catalysis from CuO nanoparticles utilising Prosopis cineraria seed extract. Overall, this technique offers several advantages, like high yields at fast reaction times, and low catalyst loading are just a few of this approach’s many benefits.

Isothiourea‐Catalysed Acylative Kinetic Resolution of Tertiary Pyrazolone Alcohols

AbstractThe development of methods for the selective acylative kinetic resolution (KR) of tertiary alcohols is a recognised synthetic challenge with relatively few successful substrate classes reported to date. In this manuscript, a highly enantioselective isothiourea‐catalysed acylative KR of tertiary pyrazolone alcohols is reported. The scope and limitations of this methodology have been developed, with high selectivity observed across a broad range of substrate derivatives incorporating varying substitution at N(2)‐, C(4)‐ and C(5)‐, as well as bicyclic constraints within the pyrazolone scaffold (30 examples, selectivity factors (s) typically >100) at generally low catalyst loadings (1 mol %). The application of this KR method to tertiary alcohols derived directly from a natural product (geraniol), alongside pharmaceutically relevant drug compounds (indomethacin, gemfibrozil and probenecid), with high efficiency (s >100) is also described. The KR process is readily amenable to scale up using bench grade solvents and reagents, with effective resolution on a 50 g (0.22 mol) scale demonstrated. The key structural motif leading to excellent selectivity in this KR process has been probed through computation, with an NC=O⋅⋅⋅isothiouronium interaction from substrate to acylated catalyst observed within the favoured transition state. Similarly, the effect of C(5)‐aryl substitution that leads to reduced experimental selectivity is probed, with a competitive π–isothiouronium interaction identified as leading to reduced selectivity.

Polyalkenamers as Drop-In Additives for Ring-Opening Metathesis Polymerization: A Promising Upcycling Paradigm.

We report a distinct strategy to upcycle waste polyalkenamers such as polybutadiene into new, performance-advantaged materials by using them as drop-in additives for ring-opening metathesis polymerization (ROMP). The polyalkenamers serve as competent chain-transfer agents in ROMPs of common classes of cyclic olefin monomers, facilitating good molecular weight control, allowing low Ru catalyst loadings, and enabling efficient incorporation of the polyalkenamer into the synthesized polymeric material. We successfully demonstrate ROMP using model polyalkenamers and translate these learnings to leverage commercial polybutadiene and acrylonitrile butadiene styrene (ABS) as chain transfer agents for ROMP copolymerizations. Critically, our strategy is shown to be highly efficient and operationally simple, quantitatively incorporating the polyalkenamer and inheriting aspects of its thermomechanical performance. Our results highlight a promising pathway for the upcycling of polyalkenamers and provide an alternative to existing deconstruction and functional upcycling strategies.

In situ decorated pd NPs on Triazin-encapsulated Fe3O4/SiO2-NH2 as magnetic catalyst for the synthesis of diaryl ethers and oxidation of sulfides

This article is devoted to the synthesis of a new magnetic palladium catalyst that has been immobilized on A-TT-Pd coated-magnetic Fe3O4 nanoparticles. Such surface functionalization of magnetic particles is a promising method to bridge the gap between heterogeneous and homogeneous catalysis approaches. The structure, morphology, and physicochemical properties of the particles were characterized through different analytical techniques, including TEM, FT-IR, XRD, SEM, EDS, TGA-DTG, ICP, and VSM techniques. The obtained Fe3O4@SiO2@A-TT-Pd performance can show excellent catalytic activity for the synthesis of diaryl ethers and oxidation of sulfides, and the corresponding products were obtained with high yields. The advantages of this catalyst include a simple test method, green reaction conditions, no use of dangerous solvents, short reaction time, low catalyst loading, and reusability. Also, the nanocatalyst was easily separated from the reaction mixture with the help of a bar magnet and recovered and reused several times without loss of stability and activity.

NiII, PdII and PtII pincer complexes of 2-(diphenylphosphanyl)-N-(2-(diphenyl-phosphanyl)benzyl)benzamide: synthesis, reactivity and catalytic studies.

In this article, the synthesis of bis(phosphine), o-Ph2PC6H4C(O)N(H)CH2C6H4PPh2-o (1) (hereafter referred to as "PCNHCP" and its anionic form as "PCNCP") and its group 10 metal chemistry and catalytic studies are described. PCNHCP (1) on reaction with NiCl2(DME) and PdCl2(COD) afforded pincer complexes, [MCl{(PCNCP)κ3-P,N,P}] (M = Ni, 2; Pd, 3). A similar reaction of 1 with PtCl2(COD) yielded a chelate complex, [PtCl2{(PCNHCP)κ2-P,P}] (4), which on further treatment with LiHMDS produced the 1,2-azaphospholene-phosphine complex, [PtCl(Ph){(o-P(Ph)C6H4CONCH2C6H4PPh2-o)κ2-P,P}] (5) via P-C/P-N bond metathesis. Passing dry HCl gas through the solution of 5 resulted in benzene elimination to form [PtCl2{(o-P(Ph)C6H4CONCH2C6H4PPh2-o)κ2-P,P}] (6). Treatment of 1 with PtCl2(COD) and Pt(Cl)(Me)(COD) in the presence of a base resulted in pincer complexes [PtX{(PCNCP)κ3-P,N,P}] (X = Cl, 7; Me, 8). Nickel complex 2 catalyzed the Suzuki-Miyaura cross coupling reaction between bromobenzene and phenyl boronic acid to give the corresponding biphenyls in good yield. The platinum complex 5 showed good catalytic activity towards regio- and stereoselective hydroboration of terminal alkynes. Both the catalytic reactions were performed under mild reaction conditions with a very low catalyst loading.

Photoreductive N-N Homocoupling Catalyzed by a Superphotoreductant.

Azines are valuable synthons or target molecules in organic synthesis. In this work, we report that CBZ6 could work as a photoreductive catalyst for the N-N homocoupling of oximes in high efficiency. This therefore enabled convenient access to a large variety of azines from the corresponding aryl and alkyl ketones, as well as aryl aldehydes in up to 99% yield. 2,4-Dinitrophenoxyl was used as the recyclable auxiliary and the CBZ6 photocatalyst could also be recycled. These together with the low catalyst loading (2 mol % of CBZ6), the short reaction time (4 h), and the nontoxic DMSO solvent make the current process a sustainable and practical alternative to the classic methods.

Intermolecular Gold‐Catalyzed Nitrene Transfer Employing Aryl Azides: An Access to 7‐Functionalized 2‐Aminoindoles

AbstractWe report on intermolecular gold‐catalyzed nitrene transfer, utilizing o‐functionalized aryl azides as nitrene transfer reagents. This catalytic reaction provides a modular route to 7‐functionalized 2‐aminoindoles. Due to the optimized reaction conditions (toluene, 80–100 °C), a variety of functional substituents proved compatible (36 examples; yields up to 98%). The reaction can be performed using both homogeneous and heterogeneous catalytic variants with a low catalyst loading (1 mol %). The synthetic potential of the obtained products was illustrated by post‐modifications of the indole backbone and peripheral substituents. A plausible reaction mechanism includes the generation of intermediate α‐imino carbenes directly from the o‐functionalized aryl azides or other nitrene sources, such as anthranils or benzofuroxans, which form during the reaction in the cases of the specific aryls.

“One‐Stone, Two‐Birds”: Zinc‐Rich Metal–Organic Frameworks as Precursors for High‐Entropy Zn‐Air Battery Electrocatalysts with Hierarchical Pore Structures

AbstractThe active sites of inexpensive transition metal electrocatalysts are sparse and singular, thus high‐entropy alloys composed of non‐precious metals have attracted considerable attention due to their multi‐component synergistic effects. However, the facile synthesis of high‐entropy alloy composites remains a challenge. Herein, we report a “one‐stone, two‐birds” method utilizing zinc (Zn)‐rich metal–organic frameworks as precursors, by virtue of the low boiling point of Zn (907 °C) and its high volatility in alloys, high‐entropy alloy carbon nanocomposite with a layered pore structure was ultimately synthesized. The experimental results demonstrate that the volatilization of zinc can prevent metal agglomeration and contribute to the formation of uniformly dispersed high‐entropy alloy nanoparticles at slower pyrolysis and cooling rates. Simultaneously, the volatilization of Zn plays a crucial role in creating the hierarchically porous structure. Compared to the zinc‐free HEA/NC‐1, the HEA/NC‐5 derived from the precursor containing 0.8 Zn exhibit massive micropores and mesopores. The resulting nanocomposites represent a synergistic effect between highly dispersed metal catalytic centers and hierarchical adsorption sites, thus achieving excellent electrocatalytic oxygen reduction performance with low catalyst loading compared to commercial Pt/C. This convenient zinc‐rich precursor method can be extended to the production of more high‐entropy alloys and various application fields.

"One-Stone, Two-Birds": Zinc-Rich Metal-Organic Frameworks as Precursors for High-Entropy Zn-Air Battery Electrocatalysts with Hierarchical Pore Structures.

The active sites of inexpensive transition metal electrocatalysts are sparse and singular, thus high-entropy alloys composed of non-precious metals have attracted considerable attention due to their multi-component synergistic effects. However, the facile synthesis of high-entropy alloy composites remains a challenge. Herein, we report a "one-stone, two-birds" method utilizing zinc (Zn)-rich metal-organic frameworks as precursors, by virtue of the low boiling point of Zn (907 °C) and its high volatility in alloys, high-entropy alloy carbon nanocomposite with a layered pore structure was ultimately synthesized. The experimental results demonstrate that the volatilization of zinc can prevent metal agglomeration and contribute to the formation of uniformly dispersed high-entropy alloy nanoparticles at slower pyrolysis and cooling rates. Simultaneously, the volatilization of Zn plays a crucial role in creating the hierarchically porous structure. Compared to the zinc-free HEA/NC-1, the HEA/NC-5 derived from the precursor containing 0.8 Zn exhibit massive micropores and mesopores. The resulting nanocomposites represent a synergistic effect between highly dispersed metal catalytic centers and hierarchical adsorption sites, thus achieving excellent electrocatalytic oxygen reduction performance with low catalyst loading compared to commercial Pt/C. This convenient zinc-rich precursor method can be extended to the production of more high-entropy alloys and various application fields.

Organophotocatalytic Regioselective Silylation/Germylation and Cascade Cyclization of N-Alkenyl α-CF3 Acrylamides: Access to Densely Functionalized 4-Pyrrolin-2-ones.

We report an organophotoredox-catalyzed silylation/germylation cascade cyclization of N-alkenyl α-CF3 acrylamides under mild conditions. N-Aminopyridinium salts act as hydrogen atom transfer reagents under photoredox catalysis in the generation of silyl and germyl radicals. An array of silyl- and germyl-substituted 3-CF3-4-pyrrolin-2-one derivatives were constructed in a shorter reaction time with low catalyst loading in good to excellent yields at room temperature. Importantly, this protocol is amenable to the late-stage diversification of bioactive molecules, as well as to large-scale synthesis.

Ruthenium-Catalyzed Synthesis of 2-Pyrazolines via Acceptorless Dehydrogenative Coupling of Allylic Alcohols with Hydrazines.

Described herein is the synthesis of 2-pyrazolines via acceptorless dehydrogenative coupling of allylic alcohols with hydrazines based on a Ru3(CO)12/NHC-phosphine-phosphine ligand L catalytic system. The reaction not only exhibits low catalyst loading (only 0.3 mol %), wide substrate scope, good to excellent yields, and high selectivity but also omits the use of sacrificial hydrogen acceptor with only H2 and H2O as byproducts, making the reaction green and atom-economical.

Photooxidation of Toluene Derivatives under HAT and ROS Synergy.

The valorization of toluene offers a dual solution by addressing its environmental impact while also facilitating the synthesis of a diverse array of valuable fine chemicals and pharmaceutical intermediates, thus ensuring both ecological sustainability and economic viability. We report herein a synergistic approach that harmonizes hydrogen atom transfer (HAT) process with the generation of reactive oxygen species (ROS) under mild condition and low catalyst loading, which enables the efficient synthesis of a broad spectrum of esteemed benzoic acid derivatives and aryl ketones through the photocatalytic oxidation of toluene derivatives. Mechanistic elucidation reveals that the HAT reagent anthraquinone has both the capabilities to abstract hydrogen atoms and the ability to generate singlet oxygen 1O2 during energy transfer with triplet oxygen 3O2, and the combination of these two potencies significantly improves the catalytic efficiency of the reaction. This study not only introduces the amalgamation of HAT with ROS generation but also delineates a systematic approach for the selection of HAT reagents with energy transfer proficiency for ROS generation in catalytic oxidation reactions.

Photocatalytic Cascade Trifluoromethylation/Cyclization : Selective Synthesis of Trifluoroethylated Benzopyran and Benzopyranone Derivatives

We have realized the photocatalytic radical cascade cyclization reaction, enabling the one‐step synthesis of rare trifluoroethyl benzopyran derivatives with a wide variety of structures and excellent yields. Furthermore, the approach exhibits low catalyst load, strong regional control and wide applicability under mild conditions. The selectivity of this transformation is influenced by the length of the carbon chain of the benzaldehyde, as demonstrated by the density functional theory calculations. Additionally, scaling up the photocatalytic process can be easily accomplished.