Loop Primers Research Articles

Benchtop to at-home test: Amplicon-depleted CRISPR-regulated loop mediated amplification at skin-temperature for viral load monitoring

CoRPLA (CRISPR-regulated One-pot Recombinase Polymerase Loop-mediated Amplification) is an amplicon-depleted skin-temperature operated iNAAT designed for at-home testing. It uses specially designed loop primers to enhance isothermal amplification, triggering Cas12 for in-situ amplicon depletion and signal amplification. This method addresses issues like amplicon-derived aerosol contamination and complex assay formats, enabling quantitative detection with sub-attomolar sensitivity (0.5 cps/μL). CoRPLA employs a DNA hydrogel wearable tape for real-time, colorimetric readout, allowing visual differentiation of pathogen loads. It was validated with clinical samples for SARS-CoV-2, RSV, influenza A, and HPV, successfully identifying multi-level viral loads of the positive cases with results consistent with qPCR. Offering high sensitivity while eliminating false positives from aerosol contamination, CoRPLA bridges the molecular assay from benchtop to home for daily viral infections monitoring.

Development and evaluation of rapid and simple detection of Klebsiella pneumoniae using closed dumbbell-mediated isothermal amplification diagnostic assay.

Klebsiella pneumoniae (K. pneumoniae) is the most common pathogen causing hospital respiratory tract infection and epidemic. Gold standard procedures of microscopic examination and biochemical identification are widely used in clinical diagnosis with disadvantages of low sensitivity, time-consuming and sophisticated equipment requiring. An efficient, nucleic acid amplification-based sensitive and specific on-site identification of K. pneumoniae in clinical is necessary to facilitate clinical medication and disease control. We developed a closed dumbbell mediated isothermal amplification (CDA) assay for the rapid and sensitive detection of conserved rcsA gene in K. pneumoniae by real-time fluorescence monitoring and end-point colorimetric judgement. We designed and selected a pair of inner primers of CDA to detect K. pneumoniae. Then outer and loop primers were designed and verified to accelerate CDA reaction to achieve more efficient detection of K. pneumoniae. The results showed the detection limit of CDA assay was 1.2 × 10-5 ng/μL (approximately 1 copy of the target gene) within 60 min, which was 100-fold more sensitive than real-time quantitative PCR (qPCR). Several pathogen genomic DNAs (Staphylococcus aureus, Shigella sonnei, Vibrio parahaemolyticus, Escherichia coli, Candida glabrata, Candida tropicalis, Candida parapsilosis, Candida albicans, Streptococcus agalactiae, Rickettsia, Listeria monocytogenes, Pseudomonas aeruginosa, Klebsiella oxytoca, and Klebsiella aerogenes) were used to evaluate the sensitivity and specificity of the established K. pneumoniae CDA assay. Total 224 batches of samples from other strains tested were negative and 296 batches of extracted K. pneumoniae DNA samples were positive by the developed CDA amplification approach, revealing high specificity and specificity of the diagnostic assay. In addition, the results of real-time fluorescence amplification of the K. pneumoniae CDA were in consistent with those of end-point colorimetric results. The established real-time fluorescence and visual CDA assays of K. pneumoniae with merits of rapid, sensitive and specificity could be helpful for on-site diagnosis and clinical screening in rural areas.

Ultrafast DNA detection based on turn-back loop primer-accelerated LAMP (TLAMP)

Rapid DNA detection is a long-pursuing goal in molecular detection, especially in combating infectious diseases. Loop-mediated isothermal amplification (LAMP) is a robust and prevailing DNA detection method in pathogen detection, which has been drawing broad interest in improving its performance. Herein, we reported a new strategy and developed a new LAMP variant named TLAMP with a superior amplification rate. In this strategy, the turn-back loop primers (TLPs) were devised by ingeniously extending the 5’ end of the original loop primer, which conferred the new role of being the inner primer for TLPs while retaining its original function as the loop primer. In theory, based on the bifunctional TLPs, a total of eight basic dumbbell-like structures and four cyclic amplification pathways were produced to significantly enhance the amplification efficiency of TLAMP. With the enhancing effect of TLPs, TLAMP exhibited a significantly reduced amplification-to-result time compared to the conventional six-primer LAMP (typically 1 h), enabling rapid DNA detection within 20 min. Furthermore, TLAMP proved to be about 10 min faster than the fast LAMP variants reported so far, while still presenting comparable sensitivity and higher repeatability. Finally, TLAMP successfully achieved an ultrafast diagnosis of Monkeypox virus (MPXV), capable of detecting as few as 10 copies (0.67copies/μL) of pseudovirus within 20 min using real-time fluorescence assay or within 30 min using a colorimetric assay, suggesting that the proposed TLAMP offers a sensitive, specific, reliable, and, most importantly, ultrafast DNA detection method when facing the challenges posed by infectious diseases.

Establishment and evaluation of a new fluorescent probe method based on loop-mediated isothermal amplification for the detection of Mycobacterium tuberculosis complex.

We aimed to develop a novel diagnostic method called multiplex fluorescence of loop primer upon self-dequenching loop-mediated isothermal amplification (mFLOS-LAMP) for the rapid detection of Mycobacterium tuberculosis complex (MTBC). A set of specific primers was designed to target the detection of IS1081 and IS6110 genes, which are insertion sequences within the MTBC. The 110 sputum specimens collected were assessed using the established mFLOS-LAMP method, multiplex polymerase chain reaction, Xpert MTB/RIF, and smear microscopy. The optimal reaction temperature and duration for mFLOS-LAMP were determined to be 65°C and 30 min, respectively, by optimizing the entire system. The detection sensitivity of mFLOS-LAMP was 6.0 × 101 CFU/mL, by Bacillus Calmette-Guerin, and the mFLOS-LAMP sensitivity of M. tuberculosis H37Rv genomic DNA was 500 fg, and the specificity was 100%. The sensitivity of mFLOS-LAMP was 94.2% and the specificity was 96.6%, when Xpert MTB/RIF was used as the reference method. There was no statistically significant difference in their detection rate (χ2 = 0, P = 1.000), and the consistency was good (kappa = 0.909, P < 0.001). The receiver operating characteristic analysis yielded the maximum area under the curve of 0.954. The mFLOS-LAMP method demonstrated high sensitivity and specificity, allowing for swift and accurate detection of MTBC.

A Multiplex Fluorescence of Loop Primer Upon Self-Dequenching Loop-Mediated Isothermal Amplification Assay for the Detection of Epstein-Barr Virus and Human Parvovirus B19 in Clinical Transplant Samples.

Viral infections are major causes of mortality in solid-organ and hematopoietic stem cell transplant recipients. Epstein-Barr virus (EBV) and Parvovirus B19 (B19V) are among the common viral infections after transplantation and were recommended for increased screening in relevant guidelines. Therefore, the development of rapid, specific, and cost-effective diagnostic methods for EBV and B19V is of paramount importance. We applied Fluorescence of Loop Primer Upon Self-Dequenching Loop-mediated Isothermal Amplification (FLOS-LAMP) for the first time to develop a novel multiplex assay for the detection of EBV and B19V; the fluorophore attached to the probe are self-quenched in unbound state. After binding to the dumbbell-shaped DNA target, the fluorophore is dequenched, resulting in fluorescence development. The novel multiplex FLOS-LAMP assay was optimized by testing various ratios of primer sets. This novel assay, with great specificity, did not cross-react with the common virus. For the detection of EBV and B19V, the limits of detection could reach 969 and 798 copies/μL, respectively, and the assay could be completed within 25 min. Applying this novel assay to detect 200 clinical transplant individuals indicated that the novel assay had high specificity and good sensitivity. We developed multiplex FLOS-LAMP assay for the detection of EBV and B19V, which has the potential to become an important tool for clinical transplant patient screening.

Rapid IDH1-R132 genotyping panel utilizing locked nucleic acid loop-mediated isothermal amplification.

While the detection of single-nucleotide variants (SNVs) is important for evaluating human health and disease, most genotyping methods require a nucleic acid extraction step and lengthy analytical times. Here, we present a protocol which utilizes the integration of locked nucleic acids (LNAs) into self-annealing loop primers for the allelic discrimination of five isocitrate dehydrogenase 1 R132 (IDH1-R132) variants using loop-mediated isothermal amplification (LAMP). This genotyping panel was initially evaluated using purified synthetic DNA to show proof of specific SNV discrimination. Additional evaluation using glioma tumor lysates with known IDH1-R132 mutational status demonstrated specificity in approximately 35 min without the need for a nucleic acid extraction purification step. This LNA-LAMP-based genotyping assay can detect single base differences in purified nucleic acids or tissue homogenates, including instances where the variant of interest is present in an excess of background wild-type DNA. The pH-based colorimetric indicator of LNA-LAMP facilitates convenient visual interpretation of reactions, and we demonstrate successful translation to an end-point format using absorbance ratio, allowing for an alternative and objective approach for differentiating between positive and negative reactions. Importantly, the LNA-LAMP genotyping panel is highly reproducible, with no false-positive or false-negative results observed.

Rapid and reliable diagnosis of Moraxella catarrhalis infection using loop-mediated isothermal amplification-based testing.

Moraxella catarrhalis (M. catarrhalis) was an important pathogen closely associated with respiratory tract infections. We employed the loop-mediated isothermal amplification (LAMP) coupled with nanoparticle-based lateral flow biosensor (LFB) and fluorescence testing technique for formulating two diagnostic methods for M. catarrhalis detection, termed M. catarrhalis-LAMP-LFB assay and M. catarrhalis-LAMP-FRT, respectively. The M. catarrhalis-LAMP-LFB system incorporated the use of biotin-14-dCTP and a forward loop primer (LF) with a hapten at the 5' end. This design in LAMP reaction enabled the production of double-labeled products that could be effectively analyzed using the lateral flow biosensor (LFB). For the M. catarrhalis-LAMP-FRT assay, the LF was modified with a sequence at 5' end, and a fluorophore, as well as a black hole quencher, were strategically labeled at the 5' end and within the middle of the new LF. The restriction endonuclease Nb.BsrDI could accurately recognize and cleave the newly synthesized double-strand terminal sequences, resulting in the separation of the fluorophore from the black hole quencher and releasing fluorescence signals. Both assays have been proven to be highly sensitive and specific, capable of detecting genomic DNA of M. catarrhalis at concentrations as low as 70 fg, with no cross-reactivity observed with non-M. catarrhalis pathogens. Furthermore, both methods successfully identified M. catarrhalis in all clinical samples within 1h that were confirmed positive by real-time PCR, exhibiting superior sensitivity than conventional culture methods. Herein, the newly developed two LAMP-based assays were rapid and reliable for M. catarrhalis detection and hold significant promise for deployment in point-of-care (POC) settings.

Rapid Visual Detection of Spiroplasma eriocheiris by Loop-Mediated Isothermal Amplification with Hydroxynaphthol Blue Dye.

In recent years, a new type of Spiroplasma has been found that can cause "tremor disease" of the Chinese mitten crab Eriocheir sinensis. The outbreak of epidemic tremor disease has caused a serious setback in the Chinese mitten crab farming industry, with an incidence rate of more than 30% and mortality rates of 80-100%. Therefore, finding a sensitive method to detect tremor disease in E. sinensis has become a current research focus. In this research, a loop-mediated isothermal amplification detection method coupled with hydroxynaphthol blue dye (LAMP-HNB) was developed and used to rapidly detect Spiroplasma eriocheiris. First, we designed and synthesized specific outer primers, inner primers and loop primers based on the 16S ribosomal RNA gene of S. eriocheiris. Second, the LAMP-HNB detection method for S. eriocheiris was successfully established by screening the primers, adjusting the temperature and time of the reaction, and optimizing the concentrations of Mg2+ and dNTPs. In the specific tests, only samples infected with S. eriocheiris showed positive results, and other infections caused by bacteria and parasites tested negative, proving that the test has high specificity. Moreover, the detection limit was 2.5 × 10-6ng/µL, indicating high sensitivity. This method for detecting S. eriocheiris provides rapid visual output based on LAMP-HNB detection and is a simple, fast, sensitive, and inexpensive method that can be applied to a wide range of field investigations.

Development of a loop-mediated isothermal amplification assay for the rapid detection of Styphnolobium japonicum (L.) Schott as an adulterant of Ginkgo biloba (L.)

BackgroundSpecies adulteration is a concern in herbal products, especially when plant substitutes of lower economic value replace valuable botanicals. Styphnolobium japonicum is well known as a potential adulterant of Ginkgo biloba, which is one of the most demanded medicinal plants due to its wide use in pharmaceuticals, food supplements, and traditional medicine. Despite bearing some resemblance to ginkgo's flavonol composition, S. japonicum lacks many of G. biloba's desired therapeutic properties. To prevent adulteration practices, it is crucial to implement rigorous quality control measures, including fast and simple diagnostic tools that can be used on-field. PurposeThis study aims to develop for the first time a species-specific loop-mediated isothermal amplification (LAMP) method for the fast identification of S. japonicum in ginkgo-containing products. MethodsA set of four specific primers (SjF3, SjB3, SjFIP, and SjBIP) and loop primers (SjLF and SjLB) were designed for a LAMP based assay using the 5.8S partial sequence and the internal transcribed spacer 2 of nuclear ribosomal DNA of S. japonicum. ResultsThe successful amplification of the LAMP assay was inspected through visual detection, with the highest intensity recorded at the optimal conditions set at 68 °C for 40 min. The primers showed high specificity and were able to accurately discriminate S. japonicum from G. biloba and 49 other species of medicinal plants. Furthermore, the proposed LAMP assay proved to be fast, selective, and highly sensitive, as demonstrated by the absolute and relative limits of detection, which were reached at 0.5 pg for S. japonicum DNA and 0.01 % S. japonicum in G. biloba, respectively. ConclusionsThis novel approach allows easy identification and discrimination of S. japonicum as a potential adulterant of G. biloba, thus being a useful tool for quality control. Compared to chromatographic or PCR-based methods, the assay proved to be fast, sensitive and did not require expensive equipment, thus offering the possibly usage in field analysis.

Simultaneous and rapid colorimetric detection of distinct miRNAs using Split-LAMP.

Introduction: Aberrant microRNA (miRNA) expressions are often discovered in many life threatening diseases such as cancer. In particular, recent studies show combinations of miRNA levels have greater diagnostic accuracy as opposed to single miRNA levels. For point-of-care applications, rapid and sensitive isothermal amplification with loop-mediated isothermal amplification (LAMP) has gained significant interest. Method: We developed a cost-effective point-of-care testing (POCT) device for multiple miRNAs that can integrate miRNA signals into a single output. Results and Discussion: We demonstrate that the loop primers for LAMP can be broken and be used for miRNA detection. This split-LAMP approach provides a logic AND-gate output for two distinct miRNA inputs. We then show that this is potentially useable in point-of-care testing using pH-sensitive dye to give a rapid, colorimetric endpoint readout within 30 min. This novel logic gate approach can potentially be extended to multiple miRNAs such that there can be a powerful diagnostic concept for multiple short RNAs in a point-of-care rapid test.

Rapid extraction-free detection of the R132H isocitrate dehydrogenase mutation in glioma using colorimetric peptide nucleic acid-loop mediated isothermal amplification (CPNA-LAMP).

The R132H isocitrate dehydrogenase one (IDH1) mutation is a prognostic biomarker present in a subset of gliomas and is associated with heightened survival when paired with aggressive surgical resection. In this study, we establish proof-of-principle for rapid colorimetric detection of the IDH1-R132H mutation in tumor samples in under 1 hour without the need for a nucleic acid extraction. Colorimetric peptide nucleic acid loop-mediated isothermal amplification (CPNA-LAMP) utilizes 4 conventional LAMP primers, a blocking PNA probe complementary to the wild-type sequence, and a self-annealing loop primer complementary to the single nucleotide variant to only amplify the DNA sequence containing the mutation. This assay was evaluated using IDH1-WT or IDH1-R132H mutant synthetic DNA, wild-type or IDH1-R132H mutant U87MG cell lysates, and tumor lysates from archived patient samples in which the IDH1 status was previously determined using immunohistochemistry (IHC). Reactions were performed using a hot water bath and visually interpreted as positive by a pink-to-yellow color change. Results were subsequently verified using agarose gel electrophoresis. CPNA-LAMP successfully detected the R132H single nucleotide variant, and results from tumor lysates yielded 100% concordance with IHC results, including instances when the single nucleotide variant was limited to a portion of the tumor. Importantly, when testing the tumor lysates, there were no false positive or false negative results.

Disposable and instrument-free nucleic acid lateral flow cassette for rapid and on-site identification of adulterated goat milk

Species identification has become a significant concern due to the growing use of food alternatives that may cause allergies and reduce nutritional value. To address the issue of fraudulent adulteration of goat milk products with cow milk, we have developed an affordable, portable, and user-friendly platform called microfluidic-integrated nucleic acid lateral flow strips (LFS). This platform enables simultaneous detection of components derived from both goats and cows in goat milk. In this study, we have introduced an innovative nucleic acid labeling method. The loop primers of loop-mediated isothermal amplification (LAMP) have been modified with amplification terminator spacer C3 and an oligonucleotide sequence, thus eliminating the requirement for costly antibodies in traditional nucleic acid LFS. This modification not only lowers costs but also enables multiple detections. Additionally, we have integrated the LAMP and LFS assay steps into a microfluidic chip, allowing convenient on-site detection while effectively preventing aerosol contamination of LAMP products. The testing process includes rapid DNA extraction, followed by a short nucleic acid addition and incubation for visualized results in about 50 min. This platform is user-friendly, requiring no specialized equipment or extensive training, making it suitable for rapid on-site detection of dairy products by personnel in diverse fields.

Integration of in-cassette lysis, purification, and lateral flow strips-based sensor for rapid and on-site detection of yak milk adulteration

Amplification-based nucleic acid testing has become a widely used method for food authenticity analysis. However, due to the need for specialized instrumentation, technical expertize, and trained operators, routine nucleic acid analysis can only be performed in a laboratory setting. For perishable products like yak milk, rapid and accurate detection of dairy components on-site is crucial for the automated management of the production process and improving the milk's quality at dairies. As a feasibility study, we developed an assay strategy for the simultaneous qualitative detection of yak and cow derived components in yak milk. We presented a handheld integrated cassette that combined rapid extraction and purification of dairy nucleic acids, loop-mediated isothermal amplification (LAMP), and visual detection of lateral flow strips (LFS). To enable visual detection of LAMP amplification products on LFS, we utilized a unique primer modification method that labeled the amplification terminator and single oligonucleotide sequence at the 5′ end of the loop primer. This modification avoids the use of antibodies and conventional fluorescein/biotin. The cassette allowed for DNA transfer, fluid drive, and liquid mixing by magnetic force and gravity alone, without the need for complex pumps and valves. The disposable cassette is easy to use, costs less than $1 to produce, has low instrument dependency, and is well suited to on-site detection. The platform can detect 0.1% of cow milk adulteration in yak milk within 50 min. This fully integrated "sample in-result out" detection procedure can also be extended to other detection areas.

Multiplexed Reverse Transcription Loop-Mediated Isothermal Amplification Coupled with a Nucleic Acid-Based Lateral Flow Dipstick as a Rapid Diagnostic Method to Detect SARS-CoV-2.

Due to the high reproduction rate of COVID-19, it is important to identify and isolate infected patients at the early stages of infection. The limitations of current diagnostic methods are speed, cost, and accuracy. Furthermore, new viral variants have emerged with higher rates of infectivity and mortality, many with mutations at various primer binding sites, which may evade detection via conventional PCR kits. Therefore, a rapid method that is sensitive, specific, and cost-effective is needed for a point-of-care molecular test. Accordingly, we developed a rapid molecular SARS-CoV-2 detection kit with high specificity and sensitivity, RT-PCR, taking advantage of the loop-mediated isothermal amplification (LAMP) technique. Four sets of six primers were designed based on conserved regions of the SARS-CoV-2 genome: two outer, two inner and two loop primers. Using the optimized protocol, SARS-CoV-2 genes were detected as quickly as 10 min but were most sensitive at 30 min, detecting as little as 100 copies of template DNA. We then coupled the RT-LAMP with a lateral flow dipstick (LFD) for multiplex detection. The LFD could detect two genic amplifications on a single strip, making it suitable for multiplexed detection. The development of a multiplexed RT-LAMP-LFD reaction on crude VTM samples would be suitable for the point-of-care diagnosis of COVID-19 in diagnostic laboratories as well as in private homes.

Simultaneous identification of three clinically relevant peruvian pit vipers by multiplex loop-mediated isothermal amplification (mLAMP)

Previous knowledge about the taxonomic distribution of venomous snake species is very useful for epidemiological aspects of ophidism. Here, we sought to develop an assay for the differential identification of clinically relevant snakes in Peru: Bothrops atrox, Lachesis muta, and Crotalus durissus using a multiplex loop-mediated isothermal amplification (mLAMP) assay. For this, DNA was extracted from the shed snake skins and the mitochondrial genes Cytb, COI, and 12S rRNA were amplified and further sequenced, for the design of mLAMP reaction primers. For each snake species the forward and reverse primers, internal forward and reverse primers, and the loop primers were obtained, bearing the latter different fluorophores for product identification. Finally, the reaction was standardized in the presence of all primer sets, and an optimal amount of low molecular weight polyethyleneimine. The precipitated products were observed in a UV light transilluminator, finding a differential fluorescence according to the DNA used, with a detection limit to the naked eye in the range of 0.2–25 ng of DNA, within 30 min. This study is the first report on the use of mLAMP technology for the identification of venomous snakes.

An inexpensive and rapid diagnostic method for detection of SARS-CoV-2 RNA by loop-mediated isothermal amplification (LAMP)

SARS-CoV-2 is a public pandemic health concern globally. Nasopharyngeal and oropharyngeal swab samples are used for Covid-19 viral detection. Sample collection procedure was tedious and uncomfortable and unsuitable for biochemical and CBC analysis in swab samples. Biochemistry and CBC tests are key determinant in management of Covid-19 patients. We developed a LAMP test to detect viral RNA in blood samples. LAMP is required four specific primers targeting the internal transcribed S-region and loop primers for viral RNA amplification. RNA was extracted from blood samples by TRIzol method. LAMP reaction was performed at 60 °C for 1 hour and amplicons were visualized in HNB dye. No cross-reactivity was seen with HBV, HCV, and HIV infected sample. Out of 40 blood samples, 33 samples were positive for LAMP and Q-PCR analysis, one sample was positive for LAMP and negative for Q-PCR, two samples were negative for LAMP but positive for Q-PCR, and four blood samples were negative for LAMP and Q-PCR. LAMP method has an accuracy of 92.50%, with sensitivity and specificity of 94.28% and 80%, respectively. Thus, LAMP diagnostic test has proved reliable, fast, inexpensive and can be useful for detection where the limited resources available.•LAMP method is a potential tool for detection of SARS-CoV-2.•Blood samples are the key determinant for routine diagnostics as well as molecular diagnostics.•LAMP assay is an appropriate diagnostics method which offers greater simplicity, low cost, sensitivity, and specificity than other methods in molecular diagnostics.

Kinetics of elementary steps in loop-mediated isothermal amplification (LAMP) show that strand invasion during initiation is rate-limiting.

Loop-mediated isothermal amplification (LAMP) has proven to be easier to implement than PCR for point-of-care diagnostic tests. However, the underlying mechanism of LAMP is complicated and the kinetics of the major steps in LAMP have not been fully elucidated, which prevents rational improvements in assay development. Here we present our work to characterize the kinetics of the elementary steps in LAMP and show that: (i) strand invasion / initiation is the rate-limiting step in the LAMP reaction; (ii) the loop primer plays an important role in accelerating the rate of initiation and does not function solely during the exponential amplification phase and (iii) strand displacement synthesis by Bst-LF polymerase is relatively fast (125 nt/s) and processive on both linear and hairpin templates, although with some interruptions on high GC content templates. Building on these data, we were able to develop a kinetic model that relates the individual kinetic experiments to the bulk LAMP reaction. The assays developed here provide important insights into the mechanism of LAMP, and the overall model should be crucial in engineering more sensitive and faster LAMP reactions. The kinetic methods we employ should likely prove useful with other isothermal DNA amplification methods.

Development and evaluation of a rapid, specific, and sensitive loop-mediated isothermal amplification assay to detect Tenacibaculum sp. strain pbs-1 associated with black-spot shell disease in Akoya pearl oysters

Black-spot shell disease decreases pearl quality and threatens pearl oyster survival. Establishment of a rapid, specific, and sensitive assay to detect Tenacibaculum sp. strain Pbs-1 associated with black-spot shell disease is of commercial importance. We developed a rapid, specific, and highly sensitive loop-mediated isothermal amplification (LAMP) assay to detect Tenacibaculum sp. Pbs-1 in Akoya pearl oysters Pinctada fucata. A set of five specific primers (two inner, two outer, and a loop) were designed based on the 16S-23S internal spacer region of strain Pbs-1. The optimum reaction temperature was 63°C, and concentrations of the inner and loop primers were 1.4 and 1.0µM, respectively. The LAMP product can be detected using agarose gel electrophoresis, and the color change in the reaction tube can be detected visually (by the naked eye) following the addition of malachite green. Our assay proved to be specific for strain Pbs-1, with no cross-reactivity with five other species of Tenacibaculum. The detection limit of the LAMP assay at 35min is 50pg, and at 60min it is 5fg. We evaluated the LAMP assay using diseased and healthy pearl oysters. The results demonstrate the suitability and simplicity of this test for rapid field diagnosis of strain Pbs-1.

Improvements to the Rapid Detection of the Marine Pathogenic Bacterium, Vibrio harveyi, Using Loop-Mediated Isothermal Amplification (LAMP) in Combination with SYBR Green.

The common methods that are presently used to identify Vibrio harveyi include microscopic examination and biochemical, immunological and PCR-based assays. These methods require technical expertise, and can be time-consuming. A rapid method is required for the high-throughput screening of large number of samples. As such, we have developed a rapid, simple yet sensitive and specific detection method based on the use of the loop-mediated isothermal amplification (LAMP) of DNA. A set of six primers, i.e., two outer, two inner and two loop primers, was designed based on the in silico analysis of a large pool of 39 strains of the toxR gene sequence of V. harveyi. The addition of the loop primers decreased the reaction time of the LAMP by more than half. Furthermore, with the application of SYBR Green, the result can be obtained as quickly as in 10 to 15 min without the need of gel electrophoresis. The specificity of the method primers was then determined by performing LAMP with Vibrio and non-Vibrio samples. LAMP has a greater sensitivity than PCR reaction. The sensitivity of PCR was at 0.6 pg concentration of V. harveyi recombinant plasmid DNA standard, while LAMP was able to detect lower amounts even at 0.6 fg. The development of the LAMP assay will provide a valuable tool for the high-throughput rapid detection of V. harveyi contamination both in laboratories and in the field.

Accelerated loop-mediated isothermal amplification method for the rapid detection of Streptococcus suis serotypes 2 and 14 based on single nucleotide polymorphisms.

Streptococcus suis serotypes 2 and 14 are the most prevalent zoonotic strains. The establishment of a sensitive and extremely accurate method for point-of-care testing for Streptococcus suis serotype 2 and 14 strains is highly desirable. In this study, a loop primer probe-introduced loop-mediated isothermal amplification assay was developed to differentiate Streptococcus suis serotypes 2 and 14 based on SNP (single nucleotide polymorphism). The specific fluorescent probes were designed for the SNP site specific for serotype 2 and 14 Streptococcus suis cpsK genes, and the loop primer probe-introduced loop-mediated isothermal amplification (LAMP) assay was developed using the specific cleavage properties of the RNase H2 enzyme. Rapid and efficient LAMP assays were realized through the use of loop forward primers and stem forward primers. The results showed that the amplification reaction can be performed efficiently at 59°C. The results can be real-time detected or judged using a smartphone and a 3D-printed visualization cassette. The sensitivity of the LAMP assay can reach 18.4 CFU within 40 minutes. The detection rate of the assay system was evaluated using 19 clinical samples with suspected Streptococcus suis infection, and the detection rate was consistent with the sequencing method, suggesting that the test is highly practical. The LAMP assay for Streptococcus suis serotypes 2 and 14 established in this study has strong specificity, high sensitivity, and simple operation, while the reaction can be performed at an isothermal temperature and is not dependent on complex instruments or professional operators, making it suitable for field testing.