Long-range Brillouin Optical Time-domain Research Articles

Single-photon detector-based long-distance Brillouin optical time domain reflectometry

We present a long-range Brillouin optical time domain reflectometer (BOTDR) based on photon counting technology. We demonstrate experimentally the ability to perform a distributed temperature measurement, by detecting a hot spot in a thermal bath at 100 km, and the possibility to achieve measurement until 120 km with a spatial resolution of 10 m. We use the slope of a fiber Bragg grating (FBG) as a frequency discriminator, to convert count rate variation into a frequency shift. A performance study of our distributed sensor as a function of spatial resolution is also presented.

150 km fast BOTDA based on the optical chirp chain probe wave and Brillouin loss scheme.

Distributed long-range Brillouin optical time domain analysis (BOTDA) is an extremely time-consuming sensing scheme, which requires frequency mapping of the Brillouin spectrum and a large number of average times. Here, we propose a fast long-range BOTDA based on the optical chirp chain (OCC) probe wave and Brillouin loss scheme. The OCC-modulated probe wave is enabled by cascading fast-frequency-changing microwave chirp segments head-to-tail, which covers a large frequency range around the anti-Stokes frequency relative to the pump wave. The combination of the OCC technique and Brillouin loss scheme provides several advantages, i.e., fast measurement, a high Brillouin threshold, no additional amplification scheme, and freedom from the nonlocal effect. In the experiment, 6m spatial resolution, 3.2s measurement time, and 3MHz measurement precision were achieved over a 150km single-mode fiber.

Comparative study on reduced impacts of Brillouin pump depletion and nonlinear amplification in coded DBA-BOTDA

The impacts of Brillouin pump depletion and nonlinear amplification in coded long-range Brillouin optical time-domain analysis (BOTDA) based on distributed Brillouin amplification (DBA) were studied. The error of Brillouin frequency shift (BFS) due to Brillouin pump depletion was compared for DBA-BOTDA using non-cyclic and cyclic coding. For non-cyclic coding, significant over- and under-shoots of BFS were found in the range with larger BFS variation, such as hot spot. The impact of Brillouin pump depletion can be reduced considerably by cyclic coding. Furthermore, to compensate the BFS error due to nonlinear amplification, a simple and effective log linearization was proposed and demonstrated.

High-accuracy and long-range Brillouin optical time-domain analysis sensor based on the combination of pulse prepump technique and complementary coding

A Brillouin optical time-domain analysis (BOTDA) sensor that combines the conventional complementary coding with the pulse prepump technique for high-accuracy and long-range distributed sensing is implemented and analyzed. The employment of the complementary coding provides an enhanced signal-to-noise ratio (SNR) of the sensing system and an extended sensing distance, and the measurement time is also reduced compared with a BOTDA sensor using linear coding. The combination of pulse prepump technique enables the establishment of a preactivated acoustic field in each pump pulse of the complementary codeword, which ensures measurements of high spatial resolution and high frequency accuracy. The feasibility of the prepumped complementary coding is analyzed theoretically and experimentally. The experiments are carried out beyond 50-km single-mode fiber, and experimental results show the capabilities of the proposed scheme to achieve 1-m spatial resolution with temperature and strain resolutions equal to ∼1.6°C and ∼32 μϵ, and 2-m spatial resolution with temperature and strain resolutions equal to ∼0.3°C and ∼6 μϵ, respectively. A longer sensing distance with the same spatial resolution and measurement accuracy can be achieved through increasing the code length of the prepumped complementary code.

Long-range BOTDA sensor over 50 km distance employing pre-pumped Simplex coding

We propose and demonstrate a long-range Brillouin optical time-domain analysis (BOTDA) sensor based on the pre-pumped Simplex coding technique. This approach combines Simplex coding with the pulse pre-pump technique, which takes full advantage of the signal-to-noise ratio enhancement provided by optical pulse coding and achieves meter-scale spatial resolution with an unbroadened Brillouin gain spectrum by the use of pre-pumped short pump pulse. Compared to the widely used differential pulse-width pair technique, a comparable performance can be realized while the measurement time is reduced by half. The theoretical analysis of pre-pumped Simplex coding applied to BOTDA systems is presented and a proof-of-concept experiment is carried out along a ∼51 km single-mode fiber composed of two fiber segments with slightly different Brillouin frequency shift values. With the proposed technique, Brillouin frequency shifts of the two different fiber sections at the end of the sensing fiber are clearly distinguished, and the obtained spatial resolution and temperature/strain accuracy along the sensing fiber are respectively 1 m and . According to the experimental results, we believe that the BOTDA employing pre-pumped Simplex coding is able to realize extra-long distance sensing without Raman amplification, while keeping a high spatial resolution and measurement accuracy.

Phasorial differential pulse-width pair technique for long-range Brillouin optical time-domain analysis sensors.

We introduce a novel phasorial differential pulse-width pair (PDPP) method for Brillouin optical time-domain analysis (BOTDA) sensors that combines spatial resolution enhancement with increased tolerance to non-local effects. It is based on the subtraction of the complex time-domain traces supplied by a sensor configuration that uses a phase-modulated probe wave and RF demodulation. The fundamentals of the technique are first described theoretically and using numerical simulation of the propagating waves. Then, proof-of-concept experiments demonstrate the measurement of the Brillouin frequency shift distribution over 50-km. The system is shown to withstand large variations of the pump power generated by its interaction with a powerful probe wave along the fiber; hence, highlighting the potential of the PDPP technique to increase the detected signal-to-noise ratio in long-range BOTDA. Moreover, the PDPP is also shown to increase the measurement contrast by allowing the use of relatively long duration pulses while retaining 1-m spatial resolution.

Cyclic pulse coding for fast BOTDA fiber sensors

A cyclic pulse coding technique is proposed and experimentally demonstrated for fast implementation of long-range Brillouin optical time-domain analysis (BOTDA). The proposed technique allows for accurate temperature and strain measurements with meter-scale spatial resolution over kilometers of standard single-mode fiber, with subsecond measurement times.

Distributed Brillouin Fiber Sensor With Enhanced Sensitivity Based on Anti-Stokes Single-Sideband Suppressed-Carrier Modulation

We demonstrate an alternative technique to reduce pump depletion and to improve sensitivity in the long-range Brillouin optical time-domain analysis (BOTDA) sensor. Our BOTDA system uses an anti-Stokes single-sideband suppressed-carrier modulation technique that balances the pump depletion due to fiber loss. With this technique, we show both numerically and experimentally a great improvement compared to the dual sideband standard technique.

Simplex-Coded BOTDA Sensor Over 120-km SMF With 1-m Spatial Resolution Assisted by Optimized Bidirectional Raman Amplification

Bidirectional low-noise Raman amplification and simplex coding based on the return-to-zero modulation format are optimized through numerical simulations for long-range Brillouin optical time-domain analysis sensing. Experimental results are reported on sensing capabilities along 120-km distance with 1-m spatial resolution, and worst-case temperature and strain resolution values of 1.3 and 26 , respectively.

Long-range distributed Brillouin fiber sensors by use of an unbalanced double sideband probe

We propose and demonstrate a long-range Brillouin Optical Time-Domain Analysis (BOTDA) distributed sensing system making use of an unbalanced double sideband probe formed by a Stokes and an anti-Stokes line. In particular, we show that for each measuring condition an optimal Stokes /anti-Stokes input power ratio exists, allowing a larger suppression of nonlocal effects induced by pump depletion. Experiments on a 50 km single-mode sensing fiber with 5 meters spatial resolution are reported.

Time-division multiplexing-based BOTDA over 100km sensing length

We propose and demonstrate a high-performance and long-range Brillouin optical time-domain analysis (BOTDA) based on time-division multiplexing measurement, where a probe pulse and a pump pulse are used to perform the measurement on a selected sensing section, and the measurement of the entire sensing fiber is realized by combining the series measurements over different sections through changing the delay time between the two pulses. In experiment, a 100 km sensing fiber is divided into 11 sections based on the gain-controlled principle, and spatial resolutions of 0.6 m and 2 m are obtained at the end of 75 km and 100 km, respectively.

Brillouin distributed sensor using RF shaping of pump pulses

We introduce a novel configuration for long-range Brillouin optical time domain analysis (BOTDA) sensors that is based on shaping the pump pulses in the radio frequency instead of the optical domain. This results in a simplified setup that uses just one standard intensity modulator to generate pulses with an extremely high extinction ratio (60 dB in our experiments). We develop a theoretical model for Brillouin interaction in long-distance BOTDA and use simulations to demonstrate that the availability of such pure pulses completely suppresses measurement errors caused by pulse leakage. Finally, experimental results are shown to confirm theoretical predictions. A 25 km fibre is measured with our system and the results compared to those obtained using pump pulses with lower extinction ratios.

Long-range Brillouin optical time-domain analysis sensor employing pulse coding techniques

In this paper we describe and implement a long-range Brillouin optical time-domain analysis (BOTDA) sensor, for both temperature and strain measurements, using optical pulse coding techniques. A theoretical analysis of Simplex coding applied to BOTDA systems is presented and experimentally demonstrated for both Brillouin loss and Brillouin gain configurations. With the proposed technique, ∼7.1 dB and ∼10.3 dB of signal-to-noise ratio improvements are demonstrated in BOTDA measurements using 127-bit and 511-bit Simplex codes, respectively. This feature allows us to extend the dynamic range of the measurements, overcoming the limitations to the maximum usable optical power imposed by pump depletion and modulation instability; thus, the sensing range can be extended by several tens of kilometers while keeping meter-scale spatial resolution. Experimental results show the capabilities of optical pulse coding techniques to achieve 1 m spatial resolution over 50 km of standard single-mode fiber enabling temperature and strain resolutions equal to 2.2 °C and 44 µε, respectively.