Long-period Fiber Gratings Research Articles

Potential Multiparameter Sensor Based on Thin-Cladding Fiber Helical Long-Period Fiber Gratings

Potential Multiparameter Sensor Based on Thin-Cladding Fiber Helical Long-Period Fiber Gratings

Femtosecond Laser-Inscribed Cladding Mode Small-Period Long-Period Fiber Gratings for Temperature and Strain Sensing

Femtosecond Laser-Inscribed Cladding Mode Small-Period Long-Period Fiber Gratings for Temperature and Strain Sensing

Real-time optical fibre near-infrared chromatic dispersion analyser using collocated optical fibre gratings

We present what we believe to be a novel optical fibre device for real-time measurements of near-infrared chromatic dispersion of a liquid medium from 1100 nm to 1700 nm. This inline optical fibre chromatic dispersion analyser is based upon collocated fibre long-period gratings written adjacently in the core by femtosecond laser inscription yielding 8 attenuation bands associated with different cladding modes, yielding 8 independent measurements. This fibre device is tested on a series of chemical compounds associated with wines. The results for each compound yielded distinctive chromatic responses. A machine learning pipeline was developed that successfully clustered and classified spectral responses of the different chemicals to illustrate the distinctive responses. The limits of detection for these fibre devices ranged from 1×10−3 to 6×10−5 mol/L for the compounds associated with wines, demonstrating the potential usefulness of an optical fibre chromatic dispersion analyser is capable of monitoring in real-time effective chromatic dispersion that is not offered by any current technology.

Broadband conversion between high-order angular modes based on double-sided exposure long-period fiber grating

Broadband high-order mode converters play a fundamental and crucial role in mode division multiplexing systems. Unfortunately, there have been no reports on achieving broadband mutual conversion between high-order modes using long-period fiber gratings (LPFGs). In this paper, based on the concept of “stepwise” progressive conversion (SPC), a double-sided exposure fabrication method of LPFGs to achieve broadband mutual conversion between high-order modes is proposed and demonstrated. Based on the proposed method, broadband mode conversion from LP11 to LP21, from LP21 to LP31 and from LP31 to LP41 with low insertion loss are achieved by utilizing low exposure power and shortened device lengths. The 10 dB bandwidths of the three converters are measured to be 80 nm, 110 nm, and 90 nm, respectively, and their insertion losses are all less than 0.2 dB. Theoretically, this method can achieve broadband conversion of even higher-order modes, providing a novel solution for the fabrication of stable broadband mode converters. More generally, such mode converters can convert between any two modes and are essential for building advanced MDM networks that require routing and mode switching.

Generation of High-Quality Cylindrical Vector Beams from All-Few-Mode Fiber Laser

Transverse mode control of laser intracavity oscillation is crucial for generating high-purity cylindrical vector beams (CVBs). We utilized the mode conversion and mode selection properties of two-mode long-period fiber gratings (TM-LPFGs) and two-mode fiber Bragg gratings (TM-FBGs) to achieve intracavity hybrid-mode oscillations of LP01 and LP11 from an all-few-mode fiber laser. A mode-locked pulse output with a repetition rate of 12.46 MHz and a signal-to-noise ratio of 53 dB was achieved with a semiconductor saturable absorber mirror (SESAM) for mode-locking, at a wavelength of 1550.32 nm. The 30 dB spectrum bandwidth of the mode-locked pulse was 0.13 nm. Furthermore, a high-purity CVB containing radially polarized and azimuthally polarized LP11 modes was generated. The purity of the obtained CVB was greater than 99%. The high-purity CVB pulses have great potential for applications in optical tweezers, high-speed mode-division multiplexing communication, and more.

Mode conversion in graded-index few-mode fiber via hollow cylindrical long-period fiber gratings.

We demonstrate the realization of mode conversion using hollow cylindrical long-period fiber gratings (LPFGs) inscribed in graded-index few-mode fibers (FMFs) by a femtosecond laser. By precisely shaping the refractive index modulation into a hollow cylindrical structure, we enable efficient coupling from the fundamental mode to high-order modes (LP11, LP02, LP21, LP12, LP31, LP03, and LP22 modes). The method achieves high-efficiency and low-loss mode conversion across various mode groups, marking a first for graded-index FMFs with different grating periods. The influence of the hollow cylindrical LPFG radius on mode conversion efficiency and spectral characteristics is thoroughly investigated. Additionally, incorporating a linear polarizer allowed for distinguishing between LP modes within a mode group, enhancing the tunability of the mode converter. These mode conversion devices have significant potential for applications in mode gain equalization and mode scrambling for mode division multiplexing (MDM) systems.

A small-period long-period fiber grating biosensor based on immobilization of concanavalin A on polydopamine nanospheres for simultaneous detection of D-glucose and temperature

The accurate and sensitive monitoring of glucose levels plays a crucial role in diagnosing diabetes in clinical settings. In this work, a novel small-period long-period fiber grating (SP-LPG) biosensor was first developed for D-glucose detection based on the immobilization of concanavalin A (Con A) on polydopamine (PDA) nanospheres. SP-LPG was fabricated by using femtosecond laser direct writing technology and the obtained grating region was only 2.4 mm. The recognition element of D-glucose, Con A, was attached to the surface of PDA nanospheres. Due to the high specific surface area of PDA nanospheres, a large number of binding sites were available for Con A. The as-prepared sensor showed selective and sensitive to D-glucose measurement in the range of 10 nM to 10 mM and a low detection limit of 1.95 nM (S/N = 3) was achieved. Moreover, the small grating period of SP-LPG allows for the observation of Bragg reflection, which can be utilized for temperature sensing. This property eliminates the issue of temperature cross-sensitivity present in refractive index sensing. And the sensor exhibited a thermal sensitivity of 10 pm/°C within the range of 30 ∼ 100 °C. The developed sensor offers a convenient and efficient platform of simultaneously measuring multiple parameters, including target molecules and temperature, for real-time medical monitoring applications.

Phage-modified dual-peak long-period fiber grating biosensor for ultrasensitive, rapid and specific detection of pathogen strains

Herein, we present an ultrasensitive, rapid and specific phage-modified dual-peak long-period fiber grating (Phage-DP-LPFG) biosensor for detecting foodborne pathogens. Compared to the single-peak resonance LPFG with a grating period of 360 μm, the DP-LPFG with a grating period of 163 μm offers enhanced sensitivity to refractive index changes caused by bacterial adsorption. By directionally immobilising phages on the DP-LPFG, the sensor achieves high specificity for target bacterial strains. Upon capturing the target strain, the short-wavelength near-infrared transmission loss peak undergoes a blue shift, whereas the long-wavelength transmission loss peak exhibits a red shift. The shift in spacing between the two peaks (Δλ) increases with higher bacterial capture, enabling the quantification of target strains based on Δλ changes. Using Escherichia coli O157:H7 (E. coli O157:H7) as a model, the Phage-DP-LPFG biosensor demonstrates a linear detection range of 25–108 CFU/mL with a low limit of detection of 8 CFU/mL in 10 min under optimal conditions. The biosensor was also tested on food samples such as fish and milk, showing no notable differences from standard methods but with reduced detection time. It was further extended to the detection of another foodborne pathogen strain Hafnia paralvei (MCCC 1K06097) (H. paralvei (MCCC 1K06097)) with satisfactory results. This study offers a novel approach for the rapid, sensitive and specific detection of trace pathogenic strains in foods.

Highly sensitive threaded LPFG strain sensor

Long Period Fiber Grating (LPFG) strain sensors have been used to monitor the structural health of bridges and buildings, and there is a need to further improve their sensing sensitivity. This article proposed a threaded LPFG strain sensor, which used a CO2 laser to etch a long groove at the top of the cladding of a single-mode fiber. The fiber in the long groove area was heated and twisted to fabricate a long period fiber grating (TH-LPFG) strain sensor with a threaded groove on the cladding. When strain is applied, the strain is concentrated in the threaded area on the cladding, increasing and decreasing the effective refractive index changes of the cladding mode and core mode respectively, achieving enhanced strain sensing. The experimental outcomes demonstrate that the TH-LPFG strain sensor achieves a sensitivity of 44.9 pm/µε to strain, while its cross-sensitivity to temperature is minimal, at just 1.28 µε/°C. TH-LPFG provides a new solution for enhancing the sensitivity of LPFG strain sensing, with low production cost and low temperature crosstalk. It can be used in the field of highly sensitive strain monitoring of building structures.

Observation of the enhanced dual-split photonic spin Hall effect in wavelength domain via a helical fiber grating

To date, the photonic spin Hall effect (PSHE) has been studied and observed only in the space and momentum domains. Direct observation of the PSHE in the wavelength domain remains unexplored. In this work, we demonstrate both theoretically and experimentally the enhanced PSHE in the wavelength domain via a helical long-period fiber grating (HLPG), where the spin-dependent dual-split in the transmission spectrum of the utilized HLPG has been observed. This is unlike the PSHEs reported thus far, where a mono-splitting of the light is observed in either the space or the momentum domains. The proposed method provides an additional degree of freedom to observe the PSHE, which paves the way for exploiting all fiber-based HLPGs in chiral photonics, chiral sensors, and fine precise measurements.

Temperature self-compensated dual core fiber-optic sensor integrated with moisture sensitive MIL-96(Al) film for breath detection

In this paper, a dual-core fiber optic sensor has been proposed for dynamic monitoring of temperature and humidity. The side core is polished into a D-type optical fiber, and a layer of nano-silver film and a layer of polydimethylsiloxane (PDMS) are deposited to construct a surface plasmon resonance (SPR) temperature compensator. The middle core is constructed as the long-period fiber grating (LPFG) sensing channel. The mode conversion of LPFG is achieved by TiO2 film, and its refractive index (RI) sensitivity is increased by about 4 times. Meanwhile, a layer of moisture sensitive MIL-96(Al) film is grown outside the TiO2 film. Due to the particular pore structure for water molecules, it is possible to change the effective RI of MIL-96(Al) film by absorbing water molecules. Research has shown that the LPFG sensor can achieve a relative humidity sensitivity of −0.411 nm/%RH. Finally, the sensor successfully achieved real-time dynamic monitoring of respiratory rate.

Relative humidity sensor based on a nano-film deposited LPFG with hydrophilic polymer composite coating

A novel high-performance relative humidity (RH) sensor is proposed by using a hydrophilic polymer composite film-coated nano-film deposition deposited long-period fiber grating (LPFG). A high refractive index (RI) TiO2 nano-film is deposited on the LPFG as an inner layer. The film thickness is selected to maximize the surrounding refractive index (SRI) sensitivity of the grating when the SRI is approaching the cladding index. A composite film made of polyvinyl alcohol (PVA) and polyethylene glycol (PEG) is used as the an external humidity-to-RI transducer. The concentration and proportion of the PVA/PEG solutions are appropriately chosen to tune the refractive index (RI) RI of the polymer coating to the transition range during the RH varying from 60 % to 95 %. For the LPFG coated with two layers film, the a RH sensitivity up to 3.3 nm/% is achieved. The variation in RH is found to have a linear response. The proposed device offers a reliable alternative for higher RH environment sensing.

A Simultaneous Measurement Sensor for Temperature and Curvature Based on Congruent Quasi-Helical Long-Period Fiber Grating.

This article presents a long-period fiber-grating sensor based on a congruent quasi-helical structure (CQH-LPFG) with the two-parameter measurement of both temperature and curvature. The CQH-LPFG sensor was manufactured using a high-frequency CO2 laser, and an innovative quasi-helical structure was introduced into the two-parameter measurement of the temperature and curvature of the optical fiber sensor with excellent results. The experiment and analysis demonstrate that the curvature sensitivities of the three resonance peaks in the 1440 nm to 1540 nm transmission spectrum were 11.88 nm/m-1, 8.05 nm/m-1, and 11.11 nm/m-1, and the curvature varied ranging from 0.156 m-1 to 0.494 m-1. The three resonance peaks showed temperature responsivities of 29.87 pm/°C, 24.65 pm/°C, and 36.85 pm/°C, respectively, and the linear fit was of excellent quality. In the case of measuring both curvature and temperature changes simultaneously, the resonant peak wavelength of the CQH-LPFG sensor was demodulated through matrix analysis, with dip A and dip C providing superior simultaneous measurements. These features make it a promising candidate for applications such as engineering machinery and the health inspection of buildings.

A novel single mode fiber optic temperature sensor combined with the FLRDS technique

A single mode optical fiber loop was employed as a temperature sensor to observe changes in optical loss regarding to ringdown time (RDT) by high sensitive the fiber loop ringdown spectroscopy (FLRDS) technique which has real-time and fast response measurement capability due to allowing trapped light pulse multiple interactions with the measurands. Two different fiber loops of 45 ± 5 m and 120 ± 5 m lengths were embedded one by one into a copper, circular and closed housing. Continuous monitoring of RDTs was carried out by changing the temperature in the range of 25–200 °C with the steps of 25 °C for the first time by using bare fiber without any modification as a temperature sensor. The FLRDS system for temperature sensing has simple design without extra components such as an optical time domain reflectometer (OTDR), long-period fiber grating (LPFG) or fiber Bragg grating (FBG) as sensorhead. The FLRDS system was diligently optimized to achieve the lowest baseline as %0.49. Since the RDT of the FLRDS system was changed due to the thermal expansion of the fiber, continuous monitoring of the temperature was the first time recorded by utilizing this kind of FLRDS temperature sensor. These kind of FLRDS temperature sensors have high potential to be employed in mining, nuclear facilities, railways, underwater structures, biomedical, medicine, structural health monitoring, transportation and communication applications with simple system setup, lower cost, higher sensitivity, portability, real-time and continuous monitoring for early detection.

Spacing mode multi-wavelength erbium doped fiber laser based on a symmetrical long-period fiber grating

We present a multiwavelength erbium-doped fiber laser based on a symmetrical long-period fiber grating (LPFG) with tunable spacing mode between single lasing mode and multiwavelength spectra. The LPFG was manufactured using a thermal expansion technique using an LZM-100 glass processing system equipped with a CO2 laser, and it was used as a wavelength-selective filter (WSF) in the laser ring cavity. The laser can emit single, double, triple, quadruple, quintuple, or sextuple lines in the range from 1546 to 1563 nm, which can be tunable by controlling the radius of curvature of the LPFG in the range 0–0.2662 m −1. A minimal spacing mode of 1.92 nm was observed in the multiwavelength region; meanwhile, the fiber laser offers an average spacing mode of 6.945 nm between the multiwavelength region and the single emission. This laser has a 3 dB linewidth of 0.11 nm and a side mode suppression ratio (SMSR) of 55.56 dB. Finally, according to experimental results, the laser has high wavelength stability at room temperature for 88 min.

Novel beer bitterness measurement instrument using optical fiber sensor

This paper presents a novel optical fiber sensor for measuring the bitterness of beer samples. The sensor is based on a Mach–Zehnder interferometer (MZI) composed of two long-period fiber gratings (LPFGs). The sensor exploits the sensitivity of the LPFGs to the refractive index of the surrounding medium, which varies according to the concentration of iso-α-acids that cause bitterness in beer. The sensor uses a two-point on-line self-calibrating procedure to estimate the bitterness of unknown samples by comparison with reference samples of known bitterness. The sensor performance was evaluated in both laboratory and factory settings, showing good repeatability, reproducibility, and low bias. The proposed sensor offers a fast, simple, and low-cost alternative to the conventional method of measuring beer bitterness based on UV spectroscopy. The sensor can be integrated into the Industry 4.0 framework to improve the quality and consistency of beer production.

Femtosecond laser direct writing annular small-period long-period fiber gratings for simultaneous refractive index and temperature sensing.

A new type of small-period long-period fiber grating (SP-LPFG) consisting of a series of annuli inscribed by a femtosecond laser in a single-mode fiber is proposed and demonstrated. The effects of the annuli radii and the number of annuli in each period on the transmission spectrum are studied. The transmission spectrum of the annular SP-LPFG exhibits both strong Bragg resonances and cladding mode resonances, which have similar temperature sensitivities of 9.26 and 9.75 pm/°C, respectively. The Bragg resonances are insensitive to the change of environment refractive index (RI), while the cladding mode resonances show a RI sensitivity of 141.89 nm/RIU. The proposed sensor offers a potential solution for biomolecular sensing applications by effectively eliminating the issue of temperature cross-sensitivity. Its compact design and ease of spectral acquisition enhance its practicality and convenience.

Application of Long-Period Fiber Grating Sensors in Structural Health Monitoring: A Review

Structural health monitoring (SHM) is crucial for preventing and detecting corrosion, leaks, and other risks in reinforced concrete (RC) structures, ensuring environmental safety and structural integrity. Optical fiber sensors (OFS), particularly long-period fiber gratings (LPFG), have emerged as a promising method for SHM. Various LPFG sensors have been widely used in SHM due to their high sensitivity, durability, immunity to electromagnetic interference (EMI) and compact size. This review explores recent advancements in LPFG sensors and offers insights into their potential applications in SHM.

A highly sensitive temperature sensor based on long period fiber grating coated with polymer-bilayer-membrane

This study introduces a highly sensitive temperature sensor based on long-period fiber grating (LPFG). The sensor is composed of a long period fiber grating covered by a higher RI (RI) layer of polyvinyl alcohol (PVA) and a lower RI layer of polydimethylsiloxane (PDMS). The PVA layer enables the sensor to operate in the mode transition region with high sensitivity, and the PDMS layer further enhances the temperature sensitivity owing to its high thermos-optic coefficient. In addition, the sensor can mitigate the influence of humidity due to the hydrophobic properties of PDMS. Experimental results show that the temperature sensitivity can achieve to 1232.3 pm/℃ within the range of 20℃-100℃ for an LPFG with a period of 363 μm coated with a 265 nm PVA layer and a 20 μm PDMS layer.

Generation of multiwavelength cylindrical vector beams from a random fiber laser assisted with nonlinear amplifying loop mirror

In past decades, vector mode random fiber laser (RFL) has attracted much exploration and rapid development. In this work, we proposed and demonstrated a novel multiwavelength RFL that produces cylindrical vector beams (CVBs). The gain profile is manipulated by a homemade Sagnac loop filter assisted with the nonlinear amplifying loop mirror (NALM) mechanism to improve multi-wavelength oscillation capability. The CVBs are generated with the help of long-period fiber grating and the wavelength switchablity CVBs random fiber laser is obtained. The wideband spectrum multiwavelength CVBs with the maximum channel number of seventeen are realized with NALM. This currently holds the record for the highest number of wavelength channels of vector mode random lasers which holds great promise for free-space optical communication. Coherent-tunable low-coherence high-order modes and cylindrical vector mode random lasers utilizing wavelength tailoring have been realized with high mode purity. The proposed CVBs with modeless behavior have potential applications prospects in optical signal multiplexing, space optical communication, and speckle-free laser active imaging.