Local Sedimentary Processes Research Articles

Evolution of the Toarcian (Early Jurassic) carbon-cycle and global climatic controls on local sedimentary processes (Cardigan Bay Basin, UK)

The late Early Jurassic Toarcian Stage represents the warmest interval of the Jurassic Period, with an abrupt rise in global temperatures of up to ∼7 °C in mid-latitudes at the onset of the early Toarcian Oceanic Anoxic Event (T-OAE; ∼183 Ma). The T-OAE, which has been extensively studied in marine and continental successions from both hemispheres, was marked by the widespread expansion of anoxic and euxinic waters, geographically extensive deposition of organic-rich black shales, and climatic and environmental perturbations. Climatic and environmental processes following the T-OAE are, however, poorly known, largely due to a lack of study of stratigraphically well-constrained and complete sedimentary archives. Here, we present integrated geochemical and physical proxy data (high-resolution carbon-isotope data (δ13C), bulk and molecular organic geochemistry, inorganic petrology, mineral characterisation, and major- and trace-element concentrations) from the biostratigraphically complete and expanded entire Toarcian succession in the Llanbedr (Mochras Farm) Borehole, Cardigan Bay Basin, Wales, UK. With these data, we (1) construct the first high-resolution biostratigraphically calibrated chemostratigraphic reference record for nearly the complete Toarcian Stage, (2) establish palaeoceanographic and depositional conditions in the Cardigan Bay Basin, (3) show that the T-OAE in the hemipelagic Cardigan Bay Basin was marked by the occurrence of gravity-flow deposits that were likely linked to globally enhanced sediment fluxes to continental margins and deeper marine (shelf) basins, and (4) explore how early Toarcian (tenuicostatum and serpentinum zones) siderite formation in the Cardigan Bay Basin may have been linked to low global oceanic sulphate concentrations and elevated supply of iron (Fe) from the hinterland, in response to climatically induced changes in hydrological cycling, global weathering rates and large-scale sulphide and evaporite deposition.

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata, Canterbury Basin, New Zealand

AbstractDetermining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.

Distribution of biologic, anthropogenic, and volcanic constituents as a proxy for sediment transport in the San Francisco Bay Coastal System

Abstract Although conventional sediment parameters (mean grain size, sorting, and skewness) and provenance have typically been used to infer sediment transport pathways, most freshwater, brackish, and marine environments are also characterized by abundant sediment constituents of biological, and possibly anthropogenic and volcanic, origin that can provide additional insight into local sedimentary processes. The biota will be spatially distributed according to its response to environmental parameters such as water temperature, salinity, dissolved oxygen, organic carbon content, grain size, and intensity of currents and tidal flow, whereas the presence of anthropogenic and volcanic constituents will reflect proximity to source areas and whether they are fluvially- or aerially-transported. Because each of these constituents have a unique environmental signature, they are a more precise proxy for that source area than the conventional sedimentary process indicators. This San Francisco Bay Coastal System study demonstrates that by applying a multi-proxy approach, the primary sites of sediment transport can be identified. Many of these sites are far from where the constituents originated, showing that sediment transport is widespread in the region. Although not often used, identifying and interpreting the distribution of naturally-occurring and allochthonous biologic, anthropogenic, and volcanic sediment constituents is a powerful tool to aid in the investigation of sediment transport pathways in other coastal systems.

Facies associations and controls on the evolution from a coastal bay to a lagoon system, Santa Catarina Coast, Brazil

The diverse Holocene morphological features along the south coast of the state of Santa Catarina include lagoons and residual lakes, a barrier, a delta (constructed by the Tubarão River), and pre-existing incised valleys that have flooded and filled. This scenario contains the sedimentary record of the transition from a bay to a lagoon system, which occurred during the rise and subsequent semi-stabilisation of the relative sea-level during the Holocene. The geomorphological evolution of this area was investigated using a combination of morphology, stratigraphic analysis of rotary push cores, vibracores and trenches with radiocarbon dating, taxonomic determination and taphonomic characterisation of Holocene fossil molluscs. Palaeogeographic maps were constructed to illustrate how the bay evolved over the last 8000years. The relative sea-level rise and local sedimentary processes were the prime forcing factors determining the depositional history and palaeogeographic changes. The Holocene sedimentary succession began between 8000 and 5700cal BP with the deposits of transgressive sandsheets. These deposits correspond to the initial marine flooding surface that was formed while the relative sea-level rose at a higher rate than the input of sediments, prior to the formation of the coastal barrier. The change from a bay to a lagoon system occurred around 5700 and 2500cal BP during the mid-Holocene highstand with the formation of the barrier and with the achievement of a balance between sea-level rise and sedimentary supply. Until 2500cal BP, the presence of this barrier, the following gentle decline in sea level and the initial emergence of back-barrier features restricted the hydro-dynamic circulation inside the bay and favoured an increase in the Tubarão River delta progradation rate. The final stage, during the last 2500years, was marked by the increasing back-barrier width, with the establishment of salt marshes, the arrival of the delta in the back-barrier, and the advance of aeolian dunes along the outer lagoon margins. This study shed light on the mechanisms of coastal bay evolution in a setting existed prior to the beginning of barrier–lagoon sedimentation.

An opportunity to connect the morphodynamics of alternate bars with their sedimentary products

ABSTRACTField investigations that help clarify local sedimentary processes involved in the migration of alternate bars as a consequence of flood events are lacking. A simple approach combining scour chains, stratigraphy and frequent bathymetric surveys is proposed to connect the dynamics of free migrating alternate bars present in disconnected channels of large sandy‐gravelly rivers with their sedimentary products and vice versa. The results show that the spatial distribution of bars before a flood partly governs the scour and fill processes and that the sediment transport rates vary significantly on a single cross‐section. This can be due to preferential axes of the migration of the bars determined by their location on the cross‐section, the bank direction and the discharge. The approach allows the reconstruction of local sedimentary processes involved in alternate bar migration by combining maximum scour depths reached during a flood with frequent channel bed topography surveys and post‐flood stratigraphy. It is also possible to distinguish deposited and preserved sediments compared with sediments by‐passed during the flood. Copyright © 2011 John Wiley & Sons, Ltd.

Paleoenvironmental reconstruction of a Late Quaternary lagoon system in southern Brazil (Jaguaruna region, Santa Catarina state) based on multi‐proxy analysis

AbstractThis paper provides a paleoenvironmental reconstruction of a Late Quaternary lagoon system in the Jaguaruna region of Santa Catarina state, southern Brazil. Integrated results of bulk sedimentary organic matter characterization (δ13C, δ15N and C/N), microfossil (pollen and diatom) and grain‐size analysis from three shallow cores (∼2.5 m depth) allowed us to propose an evolving paleogeographic scenario in this coastal region for the last ca. 5500 cal a BP. The lagoonal system in this area was more extensive during the mid‐Holocene than today, with a gradual and continuous lagoon–sea disconnection until the present. We add to the debate regarding relative sea‐level (RSL) variations for the Brazilian coast during the Holocene and discuss the importance of sedimentary dynamics for interpreting changes in coastal ecosystems. The multi‐proxy analysis suggests that changes in coastal ecosystems could be directly related to local sedimentary processes, which are not necessarily linked to RSL fluctuations and/or to climatic variations. Copyright © 2011 John Wiley & Sons, Ltd.

The sedimentary expression of oceanic anoxic event 1b in the North Atlantic

AbstractThe Aptian/Albian oceanic anoxic event 1b contains the record of several perturbations in the global carbon cycle and multiple black shale levels, particularly in the Western Tethys. The local lithological expression of an oceanic anoxic event depends on palaeogeographical and depositional setting as well as on regional palaeoclimate. Marine sediments at a particular location may therefore be more or less organic‐rich (or not at all) and they may consist of different lithologies. In most studies, however, much of the lithological variability associated with oceanic anoxic events is left unaccounted for and, thus, the exact processes leading to the enrichment of organic matter in these marine sediments and their subsequent preservation in the geological record are unknown. This study focuses on the local sedimentary processes behind the deposition of organic‐rich sediments at Deep Sea Drilling Project Site 545 and Ocean Drilling Program Sites 1049 and 1276 in the North Atlantic during oceanic anoxic event 1b. Although specifically dealing with the sediments deposited during this particular event at these localities, it is expected that the same processes were responsible for determining the exact sedimentary products at localities in similar settings, as well as during other similar events in the Mesozoic. Here, it is shown that the deposition of organic‐rich sediments during oceanic anoxic event 1b was a consequence of the enhanced productivity favoured by upwelling and by riverine nutrient input, or aeolian fertilization of the euphotic zone depending on geographical location. Slope instability processes resulted in the transfer of part of these organic‐rich sediments from the shelf to deep sea depocentres as mud‐laden organic‐rich turbidites, especially in the northern North Atlantic. The so‐called ‘black shales’ are much more varied than their name implies. The end product of sedimentation during an oceanic anoxic event at a particular location is commonly the result of several equifinal processes acting on a local scale rather than the direct result of basinal or even global mechanisms.

In‐channel woody vegetation controls on sedimentary processes and the sedimentary record within alluvial environments: a modern example of an anabranch of the River Loire, France

AbstractA multidisciplinary approach was used to analyse the role of pioneer trees (Populus nigra) on bar formation in the modern fluvial system of the River Loire (France). Data were collected on seven plots located on a secondary channel, chosen for their vegetation cover and their sedimentary context. Physical features of vegetation, topographical evolution, sediment grain size and flow velocity were investigated during and after floods between 2001 and 2003. Woody vegetation responds morphologically to fast‐flowing waters and sediment deposition. These adaptations influence the role played by trees on local sedimentary processes. Some morphological types of trees exert a strong influence during flood events by deflecting, reducing or increasing the flow energy. As a consequence, the evolution of bedforms, distribution of sediment grain size and slopes are controlled by the flood type, the morphological context (i.e. high‐ or low‐energy zones), the morphology of the vegetated bar and the characteristics of vegetation. Conceptual models are proposed to account for local processes and evolution of tree groves. The first model, which describes the behaviour of groves during a single flood, underlines the sediment deposition downstream of the trees and the trapping of bedload sediments. During the falling stage of the flood, the reorientation of current streams, constrained by both local bed topography and woody vegetation, induces transverse sediment fluxes. For these water levels, the control exerted by trees on small‐scale sedimentary processes becomes significant. The second model shows the evolution of vegetation bands over several flood events. In particular, it describes the influence of vegetation on the fixing and reworking of bedload sediments during the falling limb of the hydrograph. The coalescence of vegetation‐induced bedforms and the resulting morphological changes increase the deflection power of the vegetated bar, inducing the deposition of finer sediments.

Separation Zone at Open‐Channel Junctions

The configuration of open‐channel junctions controls local sedimentary processes, channel scour, and sidewall erosion through its influence on the flow patterns established as confluent streams compete for limited channel capacity. Entry of a tributary into a mainstream ensures detachment of flow from the channel sidewall immediately downstream from the junction, and flume experiments show well‐defined relationships between the dimensions of the separation zone and discharge from the tributary. Other things equal, both the width and length of the separation zone increase systematically with an increase in confluence angle, though it is shown that values of width are much less than predicted by recent mathematical modelling. The zone grows at the expense of the proportion of the channel occupied by the immediate post‐confluence flow with the consequence that near‐bottom velocity increases by a factor of 1.3 as confluence angle is increased from 15°–90°. The implications for sediment entrainment are reviewed briefly.

A coal depositional model for the Durham Coal Measures of NE England

The Upper Carboniferous (Westphalian) Coal Measures of the Durham coalfield were deposited on a broad, flat, deltaic plain. In early Westphalian A times, a lower delta plain setting prevailed, evolving through southward deltaic progradation into an upper delta plain by mid-Westphalian A. Detailed facies analysis of large, opencast exposures, supported by extensive subsurface data, has shown that a hierarchy of depositional controls operated across the Durham area during Westphalian times; (i) on the large scale, depositional geometry was controlled by patterns of major delta progradation and switching; (ii) on the medium scale, by a combination of structurally and compactionally induced subsidence, and (iii) on the small scale, by local sedimentary processes and subsidence patterns. These observations form the basis of a coal depositional model for the Durham Coal Measures, which predicts that the thickest coals are to be found in upper delta plain domains controlled by compactional subsidence and not underlain by substantial channel sandstones. This model may also be applicable to other coalfields of northern England, and to ancient delta plain sequences elsewhere in the world.

Geothermal measurements in deep-sea drill holes

A method of measuring the in situ sediment temperatures in deep bore holes drilled to depths of several hundred meters or more beneath the sea floor has been developed. The technique, as presently used aboard the Deep-Sea Drilling Project (DSDP) drilling vessel Glomar Challenger, involves the emplacement of a temperature sensor, located below a self-contained digital temperature recorder package, a short distance into the undrilled, thermally undisturbed sediment at the bottom of the drill hole. By measuring the in situ temperature at various depths in a single drill hole it is possible to calculate the thermal gradient for various intervals in the hole. This information, in conjunction with thermal conductivity data measured aboard ship on the sediment cores recovered from the drill hole, permits computation of the heat flow through the oceanic crust. Heat flow values measured in deep drill holes in the Indian and Pacific oceans and in the Bering and Red seas are in generally good agreement with the regional geothermal flux as determined by conventional near-surface heat flow measurements, suggesting that the thousands of existent shallow heat flow values are representative of the earth's heat flux. Where multiple downhole temperature measurements made at one site permit calculation of interval heat flow values, there is no consistent indication of a significant vertical increase or decrease in heat flux, such as might be caused by long-term changes in bottom water temperature or the upward migration of interstitial fluids. We note, however, that a more detailed set of temperature measurements in a single hole is required to verify this conclusion. Downhole heat flow values made within a specific physiographic region, such as the Red Sea or the Ninety East ridge, appear to be less variable than, but equal to, the heat flow values calculated using thermal gradient measurements made at shallower depths beneath the sea floor. This observation is in accordance with theoretical considerations which indicate that temperature measurements in deep drill holes are less susceptible than conventional heat flow measurements to the disturbing thermal effects of small-scale surface topography, short-term variations in bottom water temperatures, and local sedimentary processes (slumping, erosion).