Local Pressure Research Articles

Study on heat transfer and pressure steady-state characteristics of a floating nozzle under a moving wall

This work considers the flow field as two-dimensional turbulent flow and studies the steady-state properties of heat transfer and the pressure of the suspension nozzle. An adiabatic wall parallel to the moving wall and two slit entrances at either end of the adiabatic wall make up the rectangular flow field. The SST k-ω\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$k - \\omega$$\\end{document} turbulence model is used in the turbulence computation. Both qualitative and quantitative analyses are conducted on the distribution of the flow field, temperature field, local Nusselt number, local pressure coefficient, average Nusselt number, and average pressure coefficient under various combination conditions. The findings indicate that when the suspension nozzle's flow field varies greatly, wall-jet velocity ratio is 0.1. A rise in Jet inclination angle is not helpful for the wall's suspension, and it has minimal effect on the flow field. The flow field is greatly influenced by separation space-slit width ratio. Larger separation space-slit width ratio values are advantageous for the wall's heat transmission but unfavorable for the wall's suspension. The flow field is most influenced by wall-jet velocity ratio. The wall's ability to convey heat is stronger the higher the wall-jet velocity ratio, but its ability to support weight falls.

Provincial economic growth and firm excess investment: Evidence from China

Local governments in China frequently report provincial economic growth rates that exceed their targets. Prior studies suggest that this phenomenon is attributable to governmental influence over local firms, particularly through coercing these firms into escalating investments to maximize economic expansion. Using a sample of 18,349 Chinese listed firms from 2001 to 2017, we find that firms located in regions that exceed economic growth targets tend to invest more heavily. This effect is more pronounced in years when local government officials face stronger promotion pressure; furthermore, excess economic growth is associated with diminished investment efficiency within firms and increased government subsidies. These findings suggest that excess economic growth proxies for local government opportunism and plays an important role in local firms’ investment decisions.

Auto‐Pressurized Multi‐Stage Tesla‐Valve Type Microreactors in Carbon Monoliths Obtained Through 3D Printing: Impact of Design on Fluid Dynamics and Catalytic Activity

AbstractThe present research exploits an innovative methodology for producing auto‐pressurized carbon microreactors with a precise and controlled structure analyzing the influence of their design on the fluid dynamics and their catalytic performance. Carbon monoliths with Tesla‐valve shape channels (Tesla, T, and modified Tesla, Tm) are synthesized through the combination of 3D printing and sol–gel process and further probed as Ni/CeO2 supports on CO2 methanation. The experimental results and mathematical modeling corroborated the improved performance obtained through the complex design compared to a conventional one. In addition to chaotic fluid flow induced by the deviation in flow direction, which improves the reagents‐active phase interaction, local pressure increases due to convergence of flows may enhance the Sabatier reaction according to Le Châtelier's principle. Conversely to straight channels, T and Tm are not affected by flow rate and presented chemical control. Tesla‐valve with curved angle (Tm) improved the mass transfer, achieving higher conversion and ≈30% reaction rate increase regarding right angle (T). Thus, this auto‐pressurized multi‐stage Tesla‐valve monolith opens the gate to design specific and advanced functional materials for multitude chemical reactions where not only the reactant‐active phase contact can be maximized but also the reaction conditions can be controlled to maximize the reaction kinetics.

Strain‐Tolerant Nanocomposite Conductors with Engineered Bicontinuous Phase System by Additive Liquid/Solid Assembly

AbstractIntrinsically stretchable conductors are vital components in next‐generation flexible electronics. However, solid conductive networks are generally vulnerable to external deformations due to their incompatible mechanical properties with the highly elastic substrates or matrixes. It is still challenging to achieve precisely controlled conductive structure with stable electromechanical performances. Herein, a nanocomposite conductor with 3D engineered bicontinuous phase system is developed, which is constructed by alternately arranged robust solid‐phase and conductive liquid‐phase via additive liquid/solid assembly. The proper rheological properties and extraordinary structural compatibility of the liquid‐phase prompt the formation of bridged structure within the 3D periodic solid‐phase main skeleton, giving rise to stable and even strain‐enhanced electrical and electromagnetic interference (EMI) shielding properties under external deformation. A negative resistance change of −37% along with unabated EMI shielding effectiveness and mechanical properties are obtained at 100% strain, showing negligible performance degradation even after 10,000 cycles of rigorous stretching and releasing. A strain‐tolerant pressure‐sensing device is further demonstrated using the liquid/solid nanocomposite structure, delivering a unique function of precisely recognizing the local pressure at large tensile loading interference. This work provides a new paradigm for the manufacturing of nanocomposites with desired functionalities using the adequate nanofiller reserve toward practical strain‐tolerant applications.

Thermal-hydraulic and structural analyses of an additive manufactured panel mock-up for Wendelstein7-X

After the successful short pulse operation phase 1 (OP1) of the stellarator Wendelstein 7-X with maximal plasma energies of 200 MJ, the upcoming long pulse OP2 aims at stepwise higher energies up to 18 GJ. A series of the stainless steel wall protection panels is positioned behind the divertor pumping gaps for average stationary heat loads of 100 kW/m². These panels were produced by electron beam welding of stainless steel parts to build the housing of the cooling channels. This technology was more demanding than foreseen due the complicated 3D weld seams required by the shaping of the panels. An innovative technology which is more adapted to the panel geometry is additive manufacturing. It intends to bring significant advantages by printing the housing as a single piece without welds.The paper introduces the thermal-hydraulic and structural analyses of an additive manufactured panel mock-up performed with ANSYS V2022R2. The purpose of the calculation is to compare the thermal, hydraulic and structural performance of the improved design based on additive manufacturing and the present one. The welding process dictated the design of the cooling channel that induced local recirculation areas, additional local pressure drops, non well cooled areas for weld seams integration. In addition the weld strength assessment required special codes and methods, which cost more time and efforts. Without these constraints, additive manufacturing offers the opportunity of more freedom for the design of the cooling channel to reach better heat transfer performance of the panel.

Mechanism of Evolution of Shock Wave of Muzzle Jet under Initial Interference and Its Simplified Model

Large-caliber and long-barrel weapons are important experimental devices for exploring the impact resistance and reliability of warheads. The force of impact of the muzzle jet has a significant influence on the overload resistance of the warhead and surrounding devices. The mechanism of motion of the body inside the tube cannot be ignored owing to the high kinetic energy at the muzzle. In this study, we designed the relevant experiment and a simulation model to analyze the structural characteristics and mechanism of evolution of the shock wave and the vortex structure in a muzzle jet. The aim was to examine the evolution of the shock wave with initial jet-induced interference. And we established three other simulation models to compare the similarities and differences between the results of the models. The results showed that, in the original complex model, the initial jet restricted the free expansion of the muzzle jet, and this led to many shock–shock collisions that retarded the development of the shock waves. Multiple reflected shock waves were thus formed under a high local pressure that distorted the shock structure, while the structure of the shock wave in the simplified models was clear and simple. The parameters of motion of the body changed by a little when the initial jet-induced interference was ignored. The difference in values of the strongest impact force measured at monitoring points far from the muzzle was small, with an error of about 2%, such that the simplified model without the initial jet could be used in place of the original complex model. The other simplified models yielded significant differences. Our results provide an important theoretical basis for further research on the muzzle jet and its applications in engineering.

A comparative study on waveform prediction between SPH and S-ALE methods in impact welding

To explore the optimal method for simulating impact welding, we compared detailedly the smoothed particle hydrodynamics (SPH) and structured arbitrary Lagrangian-Eulerian (S-ALE) methods in predicting bonding interface. Based on the experimental results of Cu-Q235 steel atmospheric explosive welding, an in-depth analysis was presented. The results show that the SPH and S-ALE methods converged at element sizes of 2.5 and 2 μm, respectively. When the element size was further reduced to 0.5 % of the wavelength, the errors of both methods were less than 5 %. Benefiting from the gradient mesh, the efficiency of the S-ALE method was 2–4 times that of the SPH method at the same element size. With the addition of the gas medium, the S-ALE method derived the formation mechanism of the gap gas shockwave and indicated that the pressure distribution is not uniform. Furthermore, the local high pressure of the gas shockwave prevents the vortex closure during the wave formation, generating the pore. The calculated pressure and velocity of the wavefront were 20 MPa and 3500 m s−1, respectively. In conclusion, the SPH is suitable for fast previewing waveform interfaces, while the S-ALE method has the advantage of capturing fine waveform structures under various environmental conditions.

Multi-dimensional competition in local governments, performance pressures, and corporate green innovation in China

ABSTRACT Based on the panel data of China’s listed companies from 2009 to 2020, this paper examines the relationship between multi-dimensional competition among local governments and corporate green innovation. It also investigates the influencing mechanism of performance pressures in this relationship. The results show that (1) Government competition with different motives has heterogeneous effects on green innovation. Growth and fiscal competition negatively affect green innovation, while investment attraction and regulation competition significantly positively affect green innovation. (2) The performance pressure significantly reduces the negative effect of fiscal competition and enhances the positive effect of investment attraction and regulation competition. (3) The regional heterogeneity analysis shows that investment attraction competition positively affects green innovation in the eastern, central, and western regions. While the impact of growth and fiscal competition in the eastern region is insignificant, the former is significantly negative in the central and western regions.

Characterization of pain-related behaviors in a rat model of acute-to-chronic low back pain: single vs. multi-level disc injury.

Low back pain is the most common type of chronic pain. We examined pain-related behaviors across 18 weeks in rats that received injury to one or two lumbar intervertebral discs (IVD) to determine if multi-level disc injuries enhance/prolong pain. Twenty-three Sprague-Dawley adult female rats were used: 8 received disc puncture (DP) of one lumbar IVD (L5/6, DP-1); 8 received DP of two lumbar IVDs (L4/5 & L5/6, DP-2); 8 underwent sham surgery. DP-2 rats showed local (low back) sensitivity to pressure at 6- and 12-weeks post-injury, and remote sensitivity to pressure (upper thighs) at 12- and 18-weeks and touch (hind paws) at 6, 12 and 18-weeks. DP-1 rats showed local and remote pressure sensitivity at 12-weeks only (and no tactile sensitivity), relative to Sham DP rats. Both DP groups showed reduced distance traveled during gait testing over multiple weeks, compared to pre-injury; only DP-2 rats showed reduced distance relative to Sham DP rats at 12-weeks. DP-2 rats displayed reduced positive interactions with a novel adult female rat at 3-weeks and hesitation and freezing during gait assays from 6-weeks onwards. At study end (18-weeks), radiological and histological analyses revealed reduced disc height and degeneration of punctured IVDs. Serum BDNF and TNFα levels were higher at 18-weeks in DP-2 rats, relative to Sham DP rats, and levels correlated positively with remote sensitivity in hind paws (tactile) and thighs (pressure). Thus, multi-level disc injuries resulted in earlier, prolonged and greater discomfort locally and remotely, than single-level disc injury. BDNF and TNFα may have contributing roles.

Orchid trade at the source: Epiphytic species with conspicuous flowers in low‐elevation forests are more locally collected in a Philippine key biodiversity area

AbstractOrchids are the most heavily traded plant group globally, putting pressure on wild populations in many source countries like the Philippines. Despite its rich orchid diversity, there remains a notable gap in understanding the factors driving orchid trade within the country. To address this knowledge gap and support orchid conservation efforts, we utilized a 5‐year orchid diversity dataset extensively collected through floristic field and village garden surveys in one of the largest key biodiversity areas in the southern Philippines. We employed a trait‐based approach to investigate ecological drivers of local orchid collection within this source area. Our results show that around 36% of local orchid diversity have predicted collection risks of ≥50%. Notably, locally collected orchid species exhibited multiple, large, and conspicuously colored flowers that are found in low‐elevation forests and higher up in forest stratum. Elevational distribution and flower size emerged as the strongest predictors, potentially influencing collection preferences. Our analysis of predicted collection risks underscores the vulnerability of both threatened and non‐threatened orchid species to local collection pressures. Moreover, we highlight the practical utility of our trait‐based approach in predicting risks and informing management strategies for local orchid conservation. This research marks a significant step toward identifying ecological drivers influencing orchid trade at its source, providing insights that can inform targeted conservation strategies across many key biodiversity areas for this highly diverse, charismatic, and threatened plant family.

Molecular Probing of the Microscopic Pressure at Contact Interfaces.

Obtaining insights into friction at the nanoscopic level and being able to translate these into macroscopic friction behavior in real-world systems is of paramount importance in many contexts, ranging from transportation to high-precision technology and seismology. Since friction is controlled by the local pressure at the contact it is important to be able to detect both the real contact area and the nanoscopic local pressure distribution simultaneously. In this paper, we present a method that uses planarizable molecular probes in combination with fluorescence microscopy to achieve this goal. These probes, inherently twisted in their ground states, undergo planarization under the influence of pressure, leading to bathochromic and hyperchromic shifts of their UV-vis absorption band. This allows us to map the local pressure in mechanical contact from fluorescence by exciting the emission in the long-wavelength region of the absorption band. We demonstrate a linear relationship between fluorescence intensity and (simulated) pressure at the submicron scale. This relationship enables us to experimentally depict the pressure distribution in multiasperity contacts. The method presented here offers a new way of bridging friction studies of the nanoscale model systems and practical situations for which surface roughness plays a crucial role.

Analysis of sea level variability and its contributions in the Bohai, Yellow Sea, and East China Sea

Understanding the sea level variability of the Bohai, Yellow Sea, and East China Sea (BYECS) is crucial for the socio-cultural and natural ecosystems of the coastal regions. In this study, based on satellite altimetry data, selected time range from 1993 to 2020, using the cyclostationary empirical orthogonal function (CSEOF) analysis method distinguishes the primary sea level variability modes. The analysis encompasses the seasonal signal, trend, and El Niño-Southern Oscillation (ENSO) associated mode of sea level anomaly. The amplitude of the annual cycle demonstrates a non-stationary signal, fluctuating between -15% and 15% from the average. Monsoons, atmospheric forcing, ocean circulation, wind-driven Ekman transport, and the Kuroshio emerge as the primary factors influencing BYECS variability on seasonal scales. The satellite altimetry sea level exhibits an average trend within the range of 3-4 mm/year, while the steric sea level trend is generally smaller, falling within the range of 0-2 mm/year. Throughout the entire period, the contribution of steric sea level to the mean sea level trend consistently remains below 25%. Furthermore, BYECS sea level variations have a sensitive response to strong El Niño years, with a clear regionalization of the response, which is related to the intricate atmospheric circulation and local wind pressures, as well as the influence of ocean circulation. In conclusion, we gained a more comprehensive understanding of sea level variability in the BYECS, especially the annual cycle of sea level amplitude and the response of ENSO. However, more studies still need to be done to differentiate the various factors in sea level variations.

Numerical modelling of the effects of permeability contrasts on underground hydrogen storage in sandstone reservoirs

Hydrogen is an energy carrier that can balance the divergent variations in seasonal energy demand and energy supply from renewables. Underground hydrogen storage in porous formations, such as depleted gas sandstone reservoirs or saline aquifers, provides the capacities needed for large-scale, long-duration energy balancing. This paper reports on the fundamental behaviour of hydrogen in a model reservoir setup, involving a two-phase (H 2 , water) system and a two well (injector, producer) setup placed at different depths in the reservoir. We specifically focus on the impact of natural heterogeneities, and associated permeability contrasts, on flow and efficacy of hydrogen injection and production. We found that positioning the wells, both injector and producer, at the top of the reservoir facilitates the highest hydrogen production. We also found that permeability contrasts of three to four orders of magnitude significantly affect hydrogen flow; however, factors affecting the pressure gradient also need to be considered. These factors include compartmentalization, the behaviour of co-existing fluids and the localized pressure gradient created by the hydrogen plume. Our research underlines the need to understand the architecture of the whole reservoir, from seismic to sub-seismic scales, not just the zones surrounding the wells and pathways in-between, as this controls capacity, pressure fluctuations and informs operational management decisions. Thematic collection: This article is part of the Hydrogen as a future energy source collection available at: https://www.lyellcollection.org/topic/collections/hydrogen

Localized oxygen evolution and transport analysis in PEM water electrolysis on local static pressure, temperature and current density

With the escalating severity of the global climate crisis and the strengthening global demand for carbon neutrality, hydrogen produced from renewable energy offers a pathway towards achieving carbon neutrality. To reduce the cost of eco-friendly hydrogen production, we need to increase the current density in proton exchange membrane water electrolysis for green hydrogen production, a promising technology. One problem arising from an increase in current density is that it leads to a significant generation of oxygen, resulting in mass transfer losses. However, there have been few studies on oxygen transport near the anode catalyst layer, with most studies only measuring current density. In this study, local static pressure and temperature were measured in real-time to elucidate the relationship between voltage and current. At 2.1 V (corrected voltage = 2.03 V), the static pressure amplitude is approximately −5 to 5 kPa. At 2.55 V (correction voltage = 2.41 V), it decreased by about 50 % to about −2.5 to 2.5 kPa, and the frequency became faster. With increasing voltage, the decrease in static pressure amplitude and the increase in frequency occur because oxygen rapidly increases in the catalyst layer, resulting in a reduction in residence time. At 1.65 V (corrected voltage = 1.63 V), there is little change in local static pressure, indicating the dominance of the liquid single phase. At 3.6 V (corrected voltage = 3.05 V), there is little change in local static pressure. This is due to the rapid detachment of oxygen bubbles, leading to the dominance of the gas single phase. This elucidates how oxygen bubbles are influenced by fluctuations in local static pressure, leading to the conclusion that efficient design patterns for future anode flow fields can be achieved.

Impact of budget performance management reform on local fiscal relief

Budget performance management is crucial for strengthening fiscal revenue and expenditure management, enhancing the efficiency of fiscal fund utilization, and deepening the fiscal and tax system reform. Based on the quasi-natural experiment of budget performance management reform and utilizing data from 30 provinces spanning the years 2001–2021, this study employs a multi-temporal difference-in-differences model to investigate the mechanism and effects of budget performance management reform on local government fiscal pressure from both theoretical and empirical perspectives. The results reveal that budget performance management reform has a significant effect on relieving local fiscal pressure. Parallel trends and series of robustness tests support the results. Budget performance management reform impacts fiscal pressure through fiscal expenditure efficiency, government expenditure scale, and fiscal transparency. The heterogeneity analysis results indicate that the impact advancing budget performance management reform on fiscal pressure is affected by regional environment, fiscal decentralization areas, and municipal debt areas. The research results provide direct evidence of the effect of budget performance management on fiscal pressure, providing policy insights for local governments to alleviate the contradiction between fiscal revenue and expenditure.

Microscopic insights of phase-transition-induced vapor transport enhancement in porous media

Vapor transport in porous media, often associated with liquid-vapor phase change, is an fundamental process in many emerging underground energy storage and extraction processes (i.e., seasonal solar thermal aquifer storage, geothermal extraction, extraterrestrial in-situ water extraction). By jointly using experimental imaging and numerical modeling at the micro-scale, we conduct mechanistic pore scale investigation of capillarity-dominated phase change dynamics and its influence on vapor transport in partially saturated porous rock micromodel. Strongly linked to surface roughness and wettability condition, the capillarity hinders water vaporization from rock surface micro/nano-structures as observed under the environmental scanning electron microscope. By varying the contact angle of 0°, 60°, and 120°, the lattice Boltzmann simulation shows the wettability-dependent vaporization process of capillary-hold water, where pores with hydrophilic surfaces contains significantly more liquid water than that of the hydrophobic ones under the same temperature. When saturated vapor flows through rock porous patterns, capillarity further induces water condensation on the strongly water-wet surfaces. Water condensation, yet forming water bridges/islands and causing the blockage of vapor diffusion, enhances the vapor diffusion ability counterintuitively. The reduction of diffusion path is revealed as the main reason by assessing the local vapor pressure distribution before and after the pore filling by condensate. The findings support the debatable enhancement mechanisms postulated by Philip and de Vries. This work offers the insightful interfacial hydrodynamics of vapor transport in porous media and potentially provides operational guidance for geothermal applications and beyond.

ВОЗМОЖНОСТИ УЛУЧШЕНИЯ РЕЗУЛЬТАТОВ ЛЕЧЕНИЯ У ПАЦИЕНТОВ С ХРОНИЧЕСКОЙ ЭМПИЕМОЙ ПЛЕВРЫ НА ФОНЕ БРОНХОПЛЕВРАЛЬНЫХ СВИЩЕЙ

Background. Treatment of pleural empyema in combination with bronchial fistula is aggravated by severe purulent-resorptive intoxication, which often leads to long periods of treatment with chronicity of the process and is still considered an urgent problem of modern pulmonology and thoracic surgery. Objective. To analyze the results of treatment of patients with chronic pleural empyema accompanied by bronchopleural fistulas using controlled vacuum aspiration, including in combination with the installation of a reverse endobronchial valve. Material and methods. The results of treatment of 38 patients with chronic pleural empyema in combination with bronchopleural fistula using controlled vacuum aspiration technology, including implantation of an endobronchial blocker in 15 of them were analyzed. Results. A method of hybrid surgical treatment of pleural empyema based on application of vacuum aspiration with implantation of an endobronchial blocker was developed. The technique of using adjustable vacuum aspiration in combination with endobronchial blocker implantation provides long-term and adequate blocking of the fistula-bearing bronchus without the risk of pneumonic complications in the blocked part of the lung. Vacuum aspiration based on the creation of local negative pressure accelerates the healing process of empyema cavity and eliminates intoxication syndrome, while their combination makes it possible to reduce the average duration of unstable pneumostasis from 295 days to 3 days, to shorten the total duration of treatment measures almost 4 times as well as to decrease mortality (from 6.2% in the comparison group to 0% in the main group). Conclusions. The use of endobronchial blocking in combination with vacuum aspiration of contents from the purulent cavity for the treatment of patients with chronic pleural empyema reduces the average duration of pneumostasis stabilization, the total duration of therapeutic measures as well as mortality.

Measurement of the local static mechanical pressure of earplugs

Earplugs are used in various critical industrial sectors, such as construction, aviation, military and defense, transportation, and healthcare. However, they present inherent drawbacks, notably discomfort that can lead to inconsistent and incorrect use, thereby leaving a significant proportion of workers vulnerable to irreversible hearing damage, ranging from tinnitus to deafness. This discomfort is closely linked to a physical parameter known as static mechanical pressure (SMP), representing the pressure exerted by earplugs on the earcanal walls. Determining the SMP is crucial for developing earplugs that prioritize comfort. However, experimental studies in this area are scarce and there is no experimental set-up capable of measuring the SMP whether in vivo or ex vivo. The objective of this paper is to fill this gap by presenting a novel experimental system designed to mimic a real earcanal, equipped with an optical probe for precise pressure measurements at various points along the earcanal. This precision-targeted methodology holds the promise of yielding a comprehensive pressure map spanning the entirety of the contact area between the earplug and earcanal, thereby offering unprecedented insights into SMP distribution. To validate our test bench, we conducted experiments using cylindrical rolled-down PVC earplugs inserted into a rigid cylindrical earcanal replica of varying radii. We compared our results with data obtained from a commercially available radial force tester commonly used in investigating stent grafts. Once validation was achieved, we expanded our investigation to measure SMP across various types of earplugs. Additionally, we designed and measured the SMP using roll-down foam earplugs in an artificial earcanal shaped to resemble the human anatomy. Our experimental findings were corroborated with data from finite element method (FEM) numerical calculations. Apart from providing the first comprehensive characterization of the static mechanical pressure exerted by earplugs, our research reveals that with roll-down foam earplugs, increased compression prior to insertion leads to reduced SMP. The versatility of our specially designed test bench allows for mapping SMP caused by earplugs across diverse earcanal shapes. Integration of this instrument into design frameworks holds promise for enhancing the physical comfort of earplugs and, consequently, improving their overall efficacy in hearing protection.

Thermal accumulation effects modelling of investigate radial shaft seal wear and lubrication transition mechanism

A radial shaft seal (RSS) model is established to reveal mixed thermal lubrication (MTL) and wear performance at speeds ranging from 3000r/min to 7000r/min. The model takes into account the initial temperatures of the oil medium and the running time of the RSS to investigate the transition limit of lubrication. Then a thermal fluid-solid method was developed to simulate the lubrication performance of RSS, which shows lubrication transition boundaries through rough micro convex bodies for wear deformation. The RSS deforms wedge-shaped during the wear process and a localized fluid pressure is created on the convex bodies. Considering the wear deformation of the convex bodies due to the wedge effect, the micro performance of the RSS can fully describe the mechanism of the leakage rate. As the dynamic pressure decreases and the leakage rate increases with the temperature of the medium, the RSS lubrication gradually transitions from MTL to EHL. Thus, the initial medium temperature should be considered to maintain the RSS under the mixed lubrication regime with low friction.

How do local governments respond to central mandate in affordable housing policy? A qualitative comparative analysis of forty-one Chinese cities

Countries in developed and developing worlds have faced growing challenges to solve affordable housing shortages for lower-income households, prompting the adoption of various types of mandates to compel local implementation of affordable housing policy. A large volume of literature has focused on whether and how such top-down mandate indeed improves local supply of affordable housing. Insufficient understanding has been provided regarding the multi-faceted nature of local strategic responses to a top-down housing mandate. This research addresses this intellectual gap with an empirical study of local strategic behavior in response to the affordable housing mandate that was announced by the central government during the Twelfth Five-Year Plan (2011–2015). Through systematic content analysis of local news reports on affordable housing from 41 Chinese cities from various provinces, we describe the multiple-dimensional characteristics of local policy actions as cities were compelled to complied with the mandate. We further employ a fuzzy-set qualitative comparative analysis method to investigate how top-down political pressure combines with local policy interpretation, resource mobilization capacity, and local public pressure lead to more diverse policy actions in affordable housing. This research enriches the understanding of how city governments respond to top-down housing mandate, as well as offers valuable policy implications for affordable housing policy.