Properties Of Liquid Crystals Research Articles

Effect of lateral substituents on the properties of polymerisable liquid crystals with bistolane core

ABSTRACT A new series of polymerisable liquid crystals based on bistolane core and different lateral substituent groups (F, Cl, CH3 and C2H5) were synthesised and characterised by1H-NMR and13C-NMR. The properties of these compounds were tested by DSC, POM and Abbe refractometer. The results indicate that all of these compounds display a stable nematic phase, and the introduction of lateral substituents has a significant impact on the phase behaviour and birefringence. As the size of lateral substituents gradually increases the clearing point and birefringence of the liquid crystals both show a decreasing trend. The birefringence of these new compounds reaches 0.36 ~ 0.49, which is about 2 ~ 3 times that of the commercial compounds RM257. These new polymerisable liquid crystals with extremely high birefringence provide a choice for developing devices based on planar optics.

New graphene oxide doped polymer dispersed liquid crystal nanocomposites targeted to eco-friendly and energy-efficient smart windows

Graphene oxide-polymer dispersed liquid crystal (GO-PDLC) composites are proposed as a solution for energy-efficient switchable windows. These composites were prepared by incorporating varying concentrations of graphene oxide (GO) into a mixture of nematic liquid crystal (E7) and a UV–Vis curable resin using the polymerization-induced phase separation technique. The results indicate that the dispersion of GO at an optimum concentration of 0.005 wt% significantly affects the morphology, phase transition temperatures, and electro-optic properties of polymer dispersed liquid crystal (PDLC). In particular, the GO-PDLC composites exhibit a transition from an opaque to a transparent state at a remarkably low voltage (∼11.5 V) compared to pure PDLC cell. Dielectric analysis reveals that adding GO increases the permittivity, conductivity, and dielectric strength of PDLC composites. Moreover, the Cole-Cole plot indicates a non-Debye type relaxation in a higher frequency region. Furthermore, a blue shift in emission wavelength and enhanced photoluminescence intensity suggest alterations in electronic transitions within the composites. This comprehensive study provides valuable insights into optimizing the properties of PDLCs through the dispersion of GO, thereby offering promising prospects for their utilization in various optoelectronic applications.

Smart design of highly luminescent octupolar mesogenic tetra styryl-alkynyl bipyrimidine-based chromophores presenting non-linear optical properties

The research investigations reported in this paper focuses on the influence of rational design on the photophysical properties of new all-organic multifunctional chromophores. Nonlinear optical (NLO) behavior, optical properties and mesogenicity of several new π-conjugated octupolar chromophores, presenting alkoxy styryl-alkynyl donor groups carrying aliphatic achiral and chiral chains in the 3,4/3,5/2,4 position, connected to electron-accepting 2,2-bipyrimidine cores are investigated by various techniques (light-transmission measurements, polarized-light optical microscopy, differential scanning calorimetry measurements, two-photon excited fluorescence and Hyper Rayleigh Scattering). The mesogenic properties were investigated depending on the position of the alkoxy chain and the 3,4 derivatives were found to exhibit liquid-crystal properties with the formation columnar phases over large temperature ranges which were confirmed by small-angle X-ray scattering analysis. All the molecules exhibit exceptional high fluorescence quantum yields values around 80 % and excellent nonlinear optical properties.

Systematic study of chromonic liquid crystal-based complex emulsions and their application in the preparation of silica nanomaterials

Multiple triphasic emulsions constitute versatile templates for the preparation of complex particles and capsules. In these emulsions the volume fractions and interfacial tensions between the phases dictate the droplet morphology, enabling various morphologies such as Janus, core-shell and snowman droplets. In this article, we describe the preparation of all-aqueous water-in-water (W/W) emulsions composed by a perylene-based chromonic liquid crystal and a hydrophilic polymer. This combination yields emulsions with liquid crystalline droplets exhibiting diverse configurations of the director, including the formation of twisted structures, from achiral mesogens. Three-phase multiple emulsions with various morphologies were obtained by the emulsification of W/W emulsions in either another aqueous phase or in hexadecane. The resulting droplet morphologies depended on the composition of the system. Furthermore, hollow silica particles with a chromonic-templated microporous structure were prepared via a sol−gel reaction within the liquid crystalline phase of water-in-water-in-oil emulsions. These findings show how the unique templating properties of chromonic liquid crystals can be applied to all-aqueous emulsions for the synthesis of complex silica particles, with a controlled structure both at the micro- and nanoscale.

Dynamic Dipole Moment of Luminescent Liquid Crystals Enabled Highly Efficient Active Waveguide Materials Design and Synthesis

AbstractOrganic optical waveguide materials have attracted considerable attention for their promising applications in photonic and optoelectronic devices. However, for most materials, excellent light‐loss properties at high temperature cannot be obtained due to many factors. Consequently, realizing efficient optical waveguide materials that perform well at elevated temperatures remains a significant challenge. In this study, relying on the luminescent properties and self‐assembly properties of luminescent liquid crystals (LLCs), successfully fabricated materials are present for highly efficient active optical waveguides. A systematically synthesized set of LLCs with different structures is named according to the substituent type and the position of the cyano group, namely α‐DECN, α‐DEEOCN, β‐DECN, and β‐DEEOCN. Notably, α‐DECN and β‐DECN reveal hexagonal columnar phase, while α‐DEEOCN and β‐DEEOCN exhibit smectic phase. Optical waveguide experiments have revealed that the obtained LLCs showed highly efficient optical waveguide behavior, where the lowest light loss reached 0.15 dB mm−1 at room temperature. Remarkably, these LLCs show even lower light loss at high temperatures, with the light loss reaching 0.11 dB mm−1 as the lowest point. Further experimental results indicate that this phenomenon is attributed to the change in the dipole moment of these molecules. This research forms a significant groundwork for advanced exploration in optical waveguide material.

Water structural effects on DNA–DNA interactions and homologous recognition

Comprehending the principles underlying the interaction between DNA molecules in electrolyte solution is of crucial importance for understanding the phenomena of DNA condensation, recognition of homologous genes, and properties of DNA liquid crystals. Although DNA was considered in all its helical complexity over the last two decades, only a primitive, local, electrostatic model of the aqueous solution was considered. The forces acting between DNA molecules however must be influenced by the structure of the liquid separating them. In this paper we make a step towards unravelling earlier neglected effects of water structure on DNA–DNA interactions. We develop a model of DNA interaction accounting for the nonlocal dielectric response of water and of the electrolyte plasma dissolved in it. We focus particularly on the study of the dipolar overscreening effect, which leads to decaying oscillations of the electrostatic potential about DNA, and how it will affect electrostatic energy surfaces as a function of interaxial separation and mutual azimuthal orientation of the parallelly aligned interacting DNAs. We found that going beyond the classical electrostatic description of water (the so-called primitive model) reveals a complex oscillatory interaction surface in space, with many possible metastable configurations. These however vanish rapidly with smearing of the DNA charge distribution, due to dephasing of the oscillatory components of the interaction. This dephasing results in the suppression of oscillation amplitudes and leads to the dominance of non-oscillatory components in spatial dipolar correlations and the Debye screening. These dominant correlation patterns are shown to lead to a substantial enhancement of the difference between the interaction of homologous and nonhomologous DNA sequences, deepening and sharpening the homology recognition well.

Effect of different surface alignment layers and temperature changes on bandwidth of Bragg reflection in chiral nematic liquid crystal

In recent years, the practical properties of cholesteric liquid crystals (CLCs) have been widely studied due to their unique feature of selective Bragg reflection. In this study, we investigated the following aspects: (i) the effect of surface alignment using polyvinyl alcohol, polyamide, and polyimide as covering substrate, (ii) the impact of temperature changes on the reflection bandwidth and, consequently, variations in the cholesteric pitch. Furthermore, we extended Li’s four-parameter model to the cholesteric environment using Haller’s assumption and Vuk’s equations for nematic liquid crystals (NLCs) and Fergason’s theory for CLCs. The fit of the experimental data with this model demonstrated an excellent agreement. The experimental data revealed that the S5011 chiral dopant, with left-handedness, used in the NLC environment of the host, exhibits a significant helical twist power (HTP). This leads to the narrowing of the reflection band width with increasing temperature, without causing a noticeable change in the wavelength of the central reflection. This feature highlights the high potential of these types of chiral materials as thermally stable materials for creating selective-reflective optical filters that remain stable with temperature changes, particularly away from the cholesteric to isotropic transition point.

Influence of proteins on the dielectric characteristics of 5CB and 8CB liquid crystals

ABSTRACT In this paper, we study the influence of the protein Bovine Serum Albumin (BSA) on the dielectric properties of liquid crystals (LCs) such as 4-cyano-4-pentyl biphenyl (5CB) and Octyl-4-biphenylcarbonitrile (8CB). Studying the effect of proteins on the dielectric properties of LC is essential for both fundamental research and practical applications in material science, biomedical engineering, biotechnology, and optoelectronic devices. It helps understand the protein behaviour on the surface of LCs, which offers an opportunity to develop novel sensing platforms. A polarising optical microscope (POM) was used to examine the correlation between textures formed by LCs interacting with different concentrations of BSA. In the dielectric studies, dielectric parameters such as impedance (Z), real (Z’) and imaginary (Z’’) parts of the impedance, and the tangential loss (tan δ) were measured. The investigation involved analysing relaxation times using the collected data, revealing distinct behaviours between 5CB and 8CB liquid crystals. Bode and Nyquist’s plots were constructed and analysed to investigate the changes LCs undergo while interacting with BSA. An equivalent electrical circuit (EEC) was constructed using Bode and Nyquist data, from which circuit element values were successfully extracted. The results obtained from the POM studies and the interferences drawn from the EIS can help enhance the performance of protein-based liquid crystal devices.

Effects of ion doping on the dielectric and electro-optical properties of chiral nematic liquid crystal

This study presents experimental findings pertaining to the use of the cationic surfactant cetyltrimethylammonium bromide (CTAB) as a dopant dispersed in cholesteric liquid crystal. The impact of the additive on the electrical and dielectric properties was investigated by dielectric spectroscopy. Compared with that in the pure counterpart, the dielectric relaxation frequency increased due to the added ions in the cholesteric liquid crystals impregnated with 0.01–0.5-wt% CTAB. Furthermore, by analyzing the dielectric spectra in a specific frequency range, the DC conductivity, ion density, and diffusion coefficient were calculated and compared. By fitting the experimental data into the Arrhenius equation, the activation energy was obtained as well. Our experimental results illustrated that all these physical properties were strongly dependent on the CTAB concentration and the temperature. This work also involved the electro-optical measurement in combination with the observation of optical texture. The ion addition provoked electrohydrodynamic flows in a surfactant-dispersed mixture, generating a homogeneous and transparent uniform lying helix state between two low-transmission optical states—the focal conic and dynamic scattering states. The operating frequency range of the dynamic scattering state was significantly broadened by the ionic dopant.

Biphenyls embedded Schiff base-bis esters: self-assembling behaviour, impact of additional aromatic ring and ester linkage and their DFT investigations

ABSTRACT In the present investigation, two series of biphenyl embedded Schiff base-bis esters alkyl-(E)-4-(((4’-(decyloxy)-[1,1’-biphenyl]-4-yl)methylene)amino)-benzoate, BPK-(2–18) and alkyl-(E)-4-(((4’-((4-(decyloxy)benzoyl)oxy)-[1,1’-biphenyl]-4-yl)-methylene)amino)benzoate, BPEK-(8–18) containing either terminal alkoxy biphenyl core or central biphenyl core have been synthesised and studied for their self-assembling behaviour. The compounds of both series demonstrated enantiotropic liquid crystal properties, displaying typical calamitic mesophases (Smectic A (SmA), Smectic C (SmC)) across a broad temperature range and with high thermal stability. The bimorphic behaviour of new molecules has been investigated by VT-XRD analysis. The density function theory has been done to illustrate the experimental results of the mesomorphic properties of the studied compounds. Several parameters have been calculated such as molecular geometry, dipole moment, polarisability, aspect ratio, etc. The results showed that more planar compounds will attain more packed structures leading to the formation of more ordered smectic phases.

Effect of High-Index Nanoparticles on the Emission Properties of a Dye-Doped Blue Phase Liquid Crystal

Effect of High-Index Nanoparticles on the Emission Properties of a Dye-Doped Blue Phase Liquid Crystal

Exploring the electro-optical properties of nematic liquid crystal through incorporation of ZnCuGaS2 core/shell quantum dots

ABSTRACT The current study focuses on elucidating the interaction mechanisms between ZnCuGaS2 quantum dots (QDs) and nematic liquid crystals (NLCs) (5CB), intending to comprehend how this interaction leads to the alteration of electro-optical properties of the host material. Various concentrations of QDs were incorporated into NLCs and investigated to examine their emission and transmittance characteristics. Remarkably, an enhancement (~68%) in photoluminescence was observed for the concentration of 0.04 wt. %, adding an intriguing aspect to the findings. A notable decrease in the threshold voltage, from 1.5 V (in pure NLC) to 0.5 V, was observed for the optimised concentration (0.04 wt. %) calculated using transmittance-voltage measurement. This sample exhibited a noteworthy improvement in optical transmission, showing an increase by 2.7 times compared to pure NLC. Fundamentally, the introduction of QDs leads to a reduction in light leakage centres and ionic impurities, consequently enhancing radiative recombination. Moreover, the memory effect of the sample was evident in the capacitance-voltage data, revealing that the NLC with QDs significantly increased the capacitance value from 290 pF to 466 pF when compared to the pure NLC. The objective of the present research is to examine the impact of QDs on NLC concerning key parameters such as mentioned above.

Analysing the Photo-Physical Properties of Liquid Crystals

Intrinsically fluorescent liquid crystals are highly sought after for a variety of applications. Most of the measurements of photo-physical properties of liquid crystals are made in dilute solutions, which is mainly due to the relative ease of both these measurements and the interpretation of data. The fluorescence spectra depend on a number of parameters including the concentration in liquid crystal solutions, the device geometry, and the mesophase in which the spectra have been measured. Working with neat, or concentrated, liquid crystal samples adds experimental complexities such as the inner filter effect (IFE), which affects the collection of data, interpretation of the results, and accuracy of the conclusions. In this paper, we present a systematic study of the photo-physical properties of both a model reference material, Nile red, and a nematic liquid crystal, 4-cyano-4′-pentylbiphenyl (5CB). The influence on the emission spectra of an increasing solute concentration is investigated and discussed. Moreover, a detailed investigation of the influence of the used device geometry, as well as the choice of appropriate data fitting methodologies, are presented.

P‐13.10: Synthesis and properties of polymerizable liquid crystals based on bistolane

P‐13.10: Synthesis and properties of polymerizable liquid crystals based on bistolane

Varifocal occlusion in an optical see-through near-eye display with a single phase-only liquid crystal on silicon

We propose a near-eye display optics system that supports three-dimensional mutual occlusion. By exploiting the polarization-control properties of a phase-only liquid crystal on silicon (LCoS), we achieve real see-through scene masking as well as virtual digital scene imaging using a single LCoS. Dynamic depth control of the real scene mask and virtual digital image is also achieved by using a focus tunable lens (FTL) pair of opposite curvatures. The proposed configuration using a single LCoS and opposite curvature FTL pair enables the self-alignment of the mask and image at an arbitrary depth without distorting the see-through view of the real scene. We verified the feasibility of the proposed optics using two optical benchtop setups: one with two off-the-shelf FTLs for continuous depth control, and the other with a single Pancharatnam–Berry phase-type FTL for the improved form factor.

Construction and Properties of O/W Liquid Crystal Nanoemulsion.

Liquid crystal emulsion is a new type of emulsion, in which the emulsifier molecules are located at the oil/water (O/W) interface and form a long-range ordered and short-range disordered lamellar liquid crystal. The lamellar liquid crystal formed by the emulsifier is similar to the skin stratum corneum lipid structure, which enables it to have a broad application prospect in the fields of cosmetics, pharmaceuticals, etc. In this work, a liquid crystal nanoemulsion was obtained by passing a liquid crystal emulsion stabilized by hydrogenated lecithin and phytosterol combination through a microfluidizer. The microstructure of the prepared liquid crystal nanoemulsion was investigated experimentally by dynamic light scattering, transmission electron microscopy, and small-angle X-ray scattering. The results have shown that the nanoemulsion inherited the liquid crystal emulsion property, namely, the long-range ordered and short-range disordered lamellar structure still existed at the oil/water interface even though they underwent extrusion, friction, and acceleration. At the same time, the underlying mechanisms of the existence of lamellar liquid crystal between the oil phase and the water phase for the nanoemulsion were explored theoretically by molecular dynamics simulations. The simulation results elucidated that the hydrogenated lecithin and phytosterol combination improved the flexibility of the bilayer structure composed of emulsifiers. The bilayers were the basic structure units of lamellar liquid crystals, and thus, the improved flexibility of bilayers provided insurance for the existence of lamellar liquid crystals with larger curvature around the oil droplets. In addition, the applicable properties of liquid crystal nanoemulsion were studied, and the results have shown that the liquid crystal nanoemulsion presented better slow-release and moisturizing properties than traditional nanoemulsions due to the existence of multilayers between oil and water phases. This work not only provides necessary information for the development and effective application of liquid crystal emulsions but also is helpful for in-depth understanding the inner properties of lamellar liquid crystal at molecular level.

Investigation of thermodynamical, electro-optical and dielectric properties of nematic liquid crystals dispersed with low-concentration barium titanate nanoparticles

ABSTRACT A liquid crystals nanoparticles composite was prepared by dispersing barium titanate nanoparticles (BT-NPs) into a multi-component liquid crystalline material having wide range room temperature nematic phase. The thermodynamic, optical textures, electro-optical and dielectric properties of the composite sample were studied along with pristine materials. Isotropic to nematic phase transition temperature was enhanced for nano-composites as observed from thermodynamic, optical textures and dielectric investigations. Effect of BT-NPs dispersion on various display parameters of nematic liquid crystals, namely, threshold voltage, dielectric anisotropy, DC conductivity and splay elastic constant has been explored. A relaxation mode in kHz frequency range has been observed for pure and nano-composites samples, which varies with temperature and follows Arrhenius behaviour. DC conductivity enhances approximately fivefold for BT-NPs dispersed samples. The host liquid crystalline material has nematic ordering which supports alignment of BT-NPs parallel to the nematic director which consequently improves thermal stability, dielectric and electro-optical parameters of the nano-composite system.

Smart emulsion system driven by light‐triggered ionic liquid molecules and its application in eco‐friendly water‐saving dyeing

AbstractThe smart emulsification and demulsification system with the light response is a useful tool in various industries, including green chemistry, catalytic reaction, pharmaceuticals, and environmental remediation. Herein, an ionic liquid crystal compound with a light triggered switch based on the azobenzene group [(4‐{3‐methyl‐1‐[3‐(8‐octyloxyoctyl)oxy‐4‐oxobutanoyl]imidazo‐lium‐1‐yl}octyl)oxy] ‐N‐(4‐methylphenyl)benzene‐1,2‐diazene bromide (MOIAzo), was designed and synthesized, which could cause reversible transition between emulsification and demulsification through the light trigger. The ionic liquid has an efficient photoinduced liquefaction process, which dramatically lowers the melting point of ionic liquids from 79 to 9.2 oC. This significantly broadens the liquid state temperature of the ionic liquid crystal. The ionic liquid crystal MOIAzo exhibits both photoinduced and thermally induced nematic liquid crystal properties. The smart emulsion system was effectively employed in an eco‐friendly water‐saving dyeing process of cationic dyes for cationic dyeable polyester (CDP) fabrics, which used only half the amount of water compared with the conventional water bath dyeing method. After dyeing, the oil and water phases can be efficiently separated through the light irradiation, and the oil phase can be reused for the subsequent dyeing process. This novel smart emulsion dyeing method greatly reduces the water consumption and wastewater discharge. MOIAzo as a light‐triggered ionic liquid molecule opens up new dimensions in green chemistry.

Programmable Liquid Crystal Defects and Dynamically Manipulation with Mechanical Stress

AbstractManual intervention in the self‐assembly of soft matter to obtain a desired defect structure is a complex but significant project. Specifically, the flow and optical properties of liquid crystal (LC) materials have become the most important platform for studying topological structures in ordered physical systems. The regulation of liquid crystals (LCs) is largely limited to established means such as temperature, electric field, magnetic field, etc., however, a new effective strategy by mechanical stress is desirable but elusive. Here, using disclination controlled by stress, topologically continuous superstructure is generated to apply to touch display and wideband vector beam generator. This work demonstrates a new approach for direct controllable manipulation of disclination, unlocking the long‐sought full potential of topological defect, thus paving the way for optical and dynamic applications.

Dielectric anisotropy changes in MBBA liquid crystal doped with barium titanate by a new method

In response to the burgeoning interest in enhancing the properties of liquid crystal composites, this research systematically explores the intricate interplay between MBBA nematic liquid crystals and ferroelectric barium titanate nanoparticles. The focus is modulating dielectric properties under temperature, frequency, and an applied electric field. Nuanced insights into temperature-dependent behavior, parallel and perpendicular component alterations, and a nonlinear correlation between nanoparticle concentration and dielectric constant are revealed. The study delves into dielectric anisotropy, indicating a reduction with increasing temperature. Structural analyses validate size reduction and crystal phase maintenance of barium titanate nanoparticles (NPs), emphasizing their impact on dielectric characteristics. Frequency-dependent investigations underscore a consistent decline in permittivity with rising frequency across nanoparticle concentrations. Application of an electric field in filling process of liquid crystal cells reveals irregular changes in dielectric constant, holding promise for tailored applications in display technologies. These comprehensive findings offer valuable insights into manipulating dielectric anisotropy properties of MBBA liquid crystal by a simple method for potential advancements in optoelectronic devices and display technologies.