Anisotropic Liquid Crystal Research Articles

Alignment assessment of anisotropic liquid crystals through an automated image processing algorithm

Liquid crystals (LCs) are recognised as an emerging type of responsive and functional materials that exhibit diverse technological applications. The spatial arrangement or alignment of LC molecules creates an optical anisotropy, which influences the propagation of light. This study presents an automated image processing algorithm designed to quantitatively assess LC alignment. The algorithm calculates the image structure tensor and computes a score ranging from 0 to 1 to represent the uniformity of LC alignment. The tool was verified on both artificially generated images of lines with pre-defined orientations and then tested on microscope images of LCs. For the latter, test samples of deformed helix ferroelectric LCs were constructed using three different alignment methods. Analysis of microscopic images of samples prepared utilising photoalignment, polymer rubbing, and oblique evaporation alignment techniques, determined average alignment scores (mean ± standard error of the mean) of 0.44 ± 0.03, 0.26 ± 0.1, and 0.17 ± 0.04, respectively, in comparison to commercially sourced control samples with a score of 0.64 ± 0.03 (n=5 each). This study paves the way for automated objective assessment of LC alignment, a critical aspect to ensure the optimal performance, reliability, and efficiency of various devices and sensors relying on LC technology.

Vortex‐Vector Beam Conversion and Chiral Field Manipulation based on Terahertz Liquid Crystal Cascaded Metadevice

AbstractVortex‐vector beam generators can effectively improve the channel capacity and communication accuracy, but they face the problems of narrow operating frequency band, low efficiency, and fixed function. Here, a terahertz liquid crystal cascaded metadevice is demonstrated, including a liquid crystal layer, an asymmetric metasurface layer, and a helical phase metasurface layer. The combination of liquid crystal's anisotropy and structural anisotropy from the asymmetric metasurface realizes the dynamic chirality construction. Then, the tunable chiral fields are effectively coupled with the helical geometric phase of the last metasurface layer to realize an active control between symmetric and asymmetric spin‐orbit angular momentum coupling, leading to the two types of beam generation and conversion: 1) spin‐dependent conversion and energy distribution between the vortex beams with ±2 topological charges; 2) the conversions between the 2‐order vortex beam and the cylindrical vector beam. The experimental results show that the excitation efficiency of vortex beams can reach over 92.1%, and the intensity modulation depth between different types of beams is more than 72.4%. This THz beam dynamic conversion mechanism and device scheme increase the degree of freedom of the device and have potential applications in terahertz multi‐channel wireless communication, polarization multiplexing imaging, and chiral spectrum detection.

Patterned Liquid Crystal Polymer Thin Films Improved Energy Conversion Efficiency at High Incident Angles for Photovoltaic Cells.

In this report, micro-patterned silicon semiconductor photovoltaic cells have been proposed to improve the efficiency in various incident sunlight angles, using homeotropic liquid crystal polymers. The anisotropic liquid crystal precursor solution based on a reactive mesogen has good flowing characteristics. It can be evenly coated on the silicon solar cells' surface by a conventional spreading technique, such as spin coating. Once cured, the polymers exhibit asymmetric transmittance properties. The optical retardation characteristics of the coated polymer films can be eventually determined by the applicable coating and curing parameters during the processes. The birefringence of light then influences the optical path and the divergence of any encountered sunlight. This allows more photons to enter the active semiconductor layers for optical absorption, resulting in an increase in the photon-to-electron conversion, and thus improving the photovoltaic cell efficiency. This new design is straightforward and could allow various patterns to be created for scientific development. The experimental results have evidenced that the energy conversion efficiency could be improved by 2-3% for the silicon photovoltaic cells, under direct sunlight or at no inclination, when the liquid crystal polymer precursor solution is prepared at 5%. In addition, the efficiency could be much more significantly improved to 14-16% when the angle is inclined to 45°. The unique patterned liquid crystal polymer thin films provide enhanced energy conversion efficiency for silicon photovoltaic cells. The design could be further evaluated for other solar cell applications.

Ultra-sensitive optical fiber ethanol gas sensor based on Vernier effect in cascaded Mach-Zehnder interferometer and Sagnac interferometer

Optical fiber-based sensors, which show the merits of high sensitivity, real-time, and rapid detection, have important research value in the detection of volatile organic compounds (VOCs). In this paper, a novel ethanol gas sensor was experimentally investigated based on the cascaded optical fiber-based Sagnac interferometer and Mach-Zehnder interferometer. The Sagnac interferometer was constructed with an anisotropic nematic liquid crystal (NLC) film which acted as the reactor with ethanol gas. A tapered single-mode fiber (SMF) was used to build the Mach-Zehnder interferometer (MZI). The two interferometers were parallelly and tandemly cascaded respectively to achieve the magnification of measurement sensitivity. Experimental results showed that the sensitivities were 8.561 pm/ppm with a magnification factor of 3.76 for the parallel cascaded structure and 7.924 pm/ppm with a magnification factor of 3.48 for the tandemly cascaded structure. The designed optical fiber-based ethanol gas sensor, showing the advantages of compact structure, high sensitivity, small size, and low cost, could be a competitive candidate for the detection of ethanol gas leakage.

Size-dependent optical and dielectric anisotropy of CdS nanowire doped high-birefringent nematic liquid crystalline compound

Highly birefringent liquid crystals have grabbed ample attention because of their potential applications as an active medium for devices in visible, infrared and other spectral regions. Here, we have attempted to study the effect of the size and concentration of CdS nanowires on a nematic liquid crystal. Anisotropy in liquid crystals is one of those distinguishing traits that gain their superiority over other materials. We hereby have analyzed how optical and dielectric anisotropy respond to variations in the size and concentration of the dopant. The study is of significant scientific value because there is very little literature available on how dopant size can alter liquid crystalline properties and also introduces a method to tune the properties of pure liquid crystals (LCs) by varying the size and concentration of the dopant. The study explains how the size of the nanowires changes the analyzed parameters and up to what extent. The obtained results yield a significant increase in both optical and dielectric anisotropy by doping CdS nanowires making them an excellent choice for dopant selection. CdS-doped nematic LC mixtures have proved to be highly birefringent and possess a high positive dielectric anisotropy as well. Such a compound can be of great application in device fabrications such as laser beam steerers, electronic lenses, attenuators and light shutters, etc.

A computational study of nematic core structure and disclination interactions in elastically anisotropic nematics.

A singular potential method in the Q tensor order parameter representation of a nematic liquid crystal is used to study the equilibrium configuration of a disclination dipole. Unlike the well studied isotropic limit (the so called one constant approximation), we focus on the case of anisotropic Frank elasticity (bend/splay elastic constant contrast). Prior research has established that the singular potential method provides an accurate description of the tensor order parameter profile in the vicinity of a disclination core of a highly anisotropic lyotropic chromonic liquid crystal. This research is extended here to two interacting disclinations forming a dipole configuration. The director angle is shown to decay in the far field inversely with distance to the dipole as is the case in the isotropic limit, but with a different angular dependence. Therefore elastic constant anisotropy modifies the elastic screening between disclinations, with implications for the study of ensembles of defects as seen, for example, in active matter in the extended system limit.

CHARACTERIZATION OF NANO-DOPED LIQUID CRYSTALS BY X-RAY DIFFRACTION, SCANNING ELECTRON MICROSCOPE AND OPTICAL COLORIMETRY

In this paper, the self-assembling nature of nano-doped liquid crystals is characterized using different techniques. Liquid crystals, namely 4, n-alkoxybenzoic acid (nOBA, where n = 7,8), doped with magnetic nanoparticles (Fe3O4 of size 20nm) are considered for the present study. The structural and morphological properties of nano-doped liquid crystals are determined by the techniques of X-ray diffraction and Scanning Electron Microscopy. Morphological properties like grains, grain boundaries, and crystal defects are elucidated using the scanning electron microscope technique. Structural properties such as crystal structure, grain size, inter-atomic spacing, lattice constant, and dislocation density are determined using X-ray diffraction studies. The characteristics measured from the X-ray diffraction studies are correlated using the statistical analysis of Scanning electron microscope images. This is an objective analysis of X-ray diffraction studies. In addition to these techniques, colorimetric studies of optical anisotropic liquid crystals are carried out by measuring the chromaticity coordinates and color purity. This study utilizes the polarizing optical microscope technique. Furthermore, the influence of nano dopants on the characteristics of liquid crystals with carbon chain length is also discussed.

Dielectric properties of liquid crystals

In the paper, dielectric properties of liquid crystals, especially the nematic phase, arediscussed. An outline of the development of theories describing these properties is presented. Thestatic theory of dielectric permittivity of anisotropic nematic liquid crystals on Onsager, Maier andMeier approach is discussed in details. In this view, anisotropic properties of dielectric permittivityof nematics as well parameters describing these properties are presented.Keywords: material science, liquid crystals, nematics, dielectric permittivity, electron polarisability,constant and induced dipole moment of molecule, vectors of electric field intensity, induction andpolarisation in nematic phase.

Polyarylisocyanides Derived from an Alkyne-Pd(II) Catalyst as Robust Alignment Media with Excellent Enantiodiscimination.

The development of chiral alignment media for measuring anisotropic NMR parameters provides an opportunity to determine the absolute configuration of chiral molecules without the need for derivatization. However, chiral alignment media with a high and robust enantiodiscriminating property for a wide range of chiral molecules are still scarce. In this study, we synthesized cholesterol-end-functionalized helical polyisocyanides from a chiral monomer using a cholesterol-based alkyne-Pd(II) initiator. These stereoregular polyisocyanides form stable and weak anisotropic lyotropic liquid crystals (LLCs) in dichloromethane systems, exhibiting highly optical activities in both single left- and right-handed helices. The preparation process of the media was straightforward, and the aligning property of the LLCs could be controlled by adjusting the concentration and temperature. Using the chiral polyisocyanides, we extracted the residual dipolar coupling for an enantiomeric pair of isopinocampheol (IPC), as well as a number of pharmaceutical molecules, demonstrating excellent enantiodiscriminating properties for a broad range of chiral compounds.

Anisotropic ion-conductive supramolecular columnar liquid crystals composed of a benzonitrile derivative and ionic liquids

Self-organized liquid-crystalline (LC) electrolytes, which feature externally controllable ion channels, are at the forefront of advanced materials for developing next generation batteries and actuators. In this study, we present a novel family of supramolecular columnar liquid crystals that exhibit anisotropic ion-conducting properties. These liquid crystals are formed by self-assembly of a taper-shaped benzonitrile derivative with an amide moiety and ionic liquids (1-ethyl-3-methylimidazolium bromide and 1-butyl-3-methylimidazolium bromide). The cooperative interactions between the nitrile dipole-ion interaction and the bromide anion–amide NH hydrogen bond effectively confine ionic liquids to the center of columns, forming one-dimensional channels. By applying a shearing force, we achieved a uniform horizontal orientation of the supramolecular columns between comb-shaped gold electrodes deposited on a glass substrate. The columnar LC complexes that contained larger cations exhibited higher ionic conductivities compared to those with smaller cations. This can be attributed to the effective ion dissociation resulting from weak Coulombic interactions caused by the larger size of the ionic liquid, as well as the attractive cation-dipole interaction. The present study not only contributes to the understanding of the interplay of noncovalent forces but also offers insights for the design of functional supramolecular materials for future ionic devices.

Ionic Conductivity Switchable and Shape Changeable Smart Skins with Azobenzene‐Based Ionic Reactive Mesogens

AbstractTo develop smart ionic skins capable of multi‐responsiveness and switchable ionic conductivity, a stimuli‐responsive and ionic conductive azobenzene‐based monomer is newly synthesized, uniaxially oriented, and polymerized for anisotropic liquid crystal elastomers (LCEs). Since the uniaxially oriented monodomain LCE with ionic asymmetric azobenzene monomers (i‐AAM) is prepared by thermal oligomerization, uniaxial stretching, and subsequent photopolymerization, the stimuli‐responsive i‐AAM LCE is thermally contracted by increasing the temperature above TNI as well as is bent along the aligned direction by irradiating it with UV light. In addition to the change of shape, the ionic conductivity of the LCE is reversible in response to heat and light stimuli. Polydomain i‐AAM LCE polymerized without the stretching process exhibits higher ionic conductivity than stretched monodomain LCE due to the initially formed stable ionic pathways. Ionic conductivity can also be switched simultaneously by polarity changes in response to the photoisomerization of i‐AAM, increased mobility from heat, and an elastic mechanoresponse from external stresses. These i‐AAM LCE‐based soft grippers exhibit stimuli‐responsive grasping and releasing actuation and detect ionic conductivity switches finely, suggesting potential as smart skins for advanced soft robots.

Arbitrary terahertz chirality construction and flexible manipulation enabled by anisotropic liquid crystal coupled chiral metasurfaces

Chiral metasurfaces integrated with active materials can dynamically control the chirality of electromagnetic waves, making them highly significant in physics, chemistry, and biology. Herein, we theoretically proposed a general and feasible design scheme to develop a chiral metadevice based on a bilayer anisotropic metasurface and a monolayer liquid crystal (LC), which can construct and flexibly manipulate arbitrary terahertz (THz) chirality. When the twist angle between the anisotropic axes of two metasurfaces θ is not 0°, the spatial mirror symmetry of the chiral metadevice is broken, resulting in a strong THz chiral response. In addition, the introduction of anisotropic LCs not only enhances the chiral response of the metadevice but also induces the flipping modulation and frequency tunability of the chirality. More importantly, by optimizing the θ, we can flexibly design the arbitrary chiral response and the operating frequency of chirality, thereby promoting the emergence of various chiral manipulation devices. The experimental results show that the maximum circular dichroism can reach −33 dB at 0.94 THz and flip to 28 dB at 0.69 THz by rotating the LC optical axis from the x to y axis, with the maximum operating frequency tunable range of ∼120 GHz. We expect this design strategy can create new possibilities for the advancement of active THz chiral devices and their applications, including chiral spectroscopy, molecular recognition, biosensing, and fingerprint detection.

Electrically Driven Crosslinked Liquid Crystal Polymers†

Comprehensive SummaryCrosslinked liquid crystal polymers (CLCPs) are smart materials that combine the anisotropy of liquid crystals (LCs) with the elasticity of rubber. When subjected to external stimuli, they exhibit exceptional two‐way shape memory behavior. Among the various stimuli, electrical energy has the advantages of cleanliness, stability, and high controllability; hence, it is widely used for controlling CLCP‐based soft actuators, thus presenting potential for application in diverse, complex scenarios. By combining electrically driven mode and sensor equipment, precise control of CLCPs can be achieved, and the electrically driven CLCPs can accomplish more intricate and sophisticated tasks. This study presents a comprehensive review of electrically driven CLCPs with various driving mechanisms, including the electroclinic effect of ferroelectric CLCPs, the reorganization of LC molecules, the Maxwell effect of dielectric CLCPs, and the Joule heating effect of electrothermally responsive CLCP systems. In addition, a detailed analysis of the applications of electrically driven CLCPs in various research fields is presented. Finally, the current challenges in the field of electrically driven CLCP technology are summarized, along with predictions for future prospects.

Increasing the negative dielectric anisotropy of liquid crystals with polar substituents parallel to their long molecular axis through adding terminal 2,2-difluoroethyl group

ABSTRACT A series of 2,3-difluorophenylene-based negative liquid crystals which own different terminal groups has been synthesised in high yields through many classical named reactions such as Suzuki coupling and Williamson etherification. Thermal properties of these mesogens were tested by differential scanning calorimetry and the effects of the terminal groups on the melting points of molecules were evaluated. Dielectric anisotropies of the synthesised molecules were then measured and found that relatively long alkyl substituents would decrease the Δε value when compared with the ethyl. For the compound with a polar substitute on the long molecular axis, the introduction of 2,2-difluoroethyl would increase the negative Δε when it was put into the opposite direction of the original polar group, making this strategy a new access for the improvement of negative Δε. DFT calculations were carried out to analyse the orientation of the dipole moment in molecules and found that the introduction of 2,2-difluoroethyl had changed the orientation of the dipole moment into nearly perpendicular to the long molecular axis, which benefited the growth of the negative Δε value, revealing the mechanism of this strategy from the view of molecular level to some extent.

Design of prism coupling structure for liquid crystal cladding waveguide beam steerer.

This paper proposes an extended prism coupling analysis method to accurately analyze the coupling structure of liquid crystal (LC) cladding waveguide beam steerer. We analyze the effects of LC anisotropy on the coupling of transverse electric (TE) and transverse magnetic (TM) modes and derive the expression of the optical field distribution that perfectly matches the given coupling structure. Based on this method, we present the optimal coupling structure for Gaussian beam. Taking into account the practical manufacturing process, we propose a simplified coupling structure and perform a detailed analysis of its performance based on numerical simulations. Experimental results show a coupling efficiency of 91% and a coupling angle full width at half maximum (FWHM) of about ±0.02°, demonstrating the effectiveness of the proposed method in predicting the coupling performance of anisotropic cladding waveguides.

Terahertz polarization and chirality modulation induced by asymmetry inversion combining chiral metasurface and liquid crystal anisotropy.

We experimentally demonstrate a dynamic terahertz (THz) chiral device based on a composite structure of anisotropic liquid crystals (LCs) sandwiched between a bilayer metasurface. The device supports the symmetric mode and antisymmetric mode under the incidence of left- and right-circular polarized waves, respectively. The different coupling strengths of the two modes reflect the chirality of the device, and the anisotropy of the LCs can change the coupling strength of the modes, which brings tunability to the chirality of the device. The experimental results show that the circular dichroism of the device can be dynamically controlled from 28 dB to -32 dB (i.e., inversion regulation) at approximately 0.47 THz and from -32 dB to 1 dB (i.e., switching regulation) at approximately 0.97 THz. Moreover, the polarization state of the output wave is also tunable. Such flexible and dynamic manipulation of THz chirality and polarization might build an alternative pathway for complex THz chirality control, high-sensitivity THz chirality detection, and THz chiral sensing.

Anisotropic Nanomaterial Liquid Crystals: From Fiber Spinning to Additive Manufacturing.

There have long been synergistic relationships among the discovery of new anisotropic materials, advancements in liquid crystal science, and the production of manufactured goods with exciting new properties. Ongoing progress in understanding the phase behavior and shear response of lyotropic liquid crystals comprised of one-dimensional and two-dimensional nanomaterials, coupled with advancements in extrusion-based manufacturing methods, promises to enable the scalable production of solid materials with outstanding properties and controlled order across multiple length scales. This Perspective highlights progress in using anisotropic nanomaterial liquid crystals in two extrusion-based manufacturing methods: solution spinning and direct ink writing. It also describes current challenges and opportunities at the interface of nanotechnology, liquid crystalline science, and manufacturing. The intent is to inspire additional transdisciplinary research that will enable nanotechnology to fulfill its potential for producing advanced materials with precisely controlled morphologies and properties.

Field programmable topological edge array

Valley Hall topological photonic crystals, inspired by topological insulators in condensed matter physics, have provided a promising solution to control the flow of light. Recently, the dynamic manipulation property of topological photonic crystals has been widely studied. Here, we propose a novel solution for programmable valley photonic crystals, called field programmable topological edge array (FPTEA), based on the field reorientation property of nematic liquid crystals and robust valley-protected edge modes. FPTEA is composed of an array of graphene-like lattices with C3 symmetry, in which the birefringence of liquid crystal is larger than 0.5105. Due to the dielectric anisotropy of liquid crystals being sensitive to external fields such as light, heat, electric, and magnetic fields, each lattice is tunable, and the topological propagation routes and even the lattice parameters can be dynamically changed while changing the distribution of external fields. We numerically demonstrate three methods of composing an FPTEA device to design arbitrary passive optical devices by electric driving, thermal inducing, or UV writing. These results show the great application potential of liquid crystals in topological photonic crystals, and enrich the design of programmable integrated topological devices with broad working bandwidth ranging from microwave to visible light.

Pattern formation, structure and functionalities of wrinkled liquid crystal surfaces: A soft matter biomimicry platform

This review presents an integrated theoretical and computational characterization and analysis of surface pattern formation in chiral and achiral liquid crystal self-assembly and the mechanical/optical/tribological/tissue engineering surface functionalities that emerge from various wrinkling processes. Strategies to target surface patterns include linear, non-linear, multidirectional and multiscale wrinkling phenomena. The focus of the review is to show the unique surface structure-functionalities that emerge from anisotropic liquid crystal soft matter, eliminating or reducing the need of aggressive solvents, extreme pressure/temperature conditions, erosion and other surface morphing approaches. The surface pattern formation theoretical-modelling- computational results are then connected and validated with actual biological surfaces that are considered solid liquid crystal analogues, such as exocuticles of insects, fish scales, and flowers. A unique feature of thein silicosurface pattern formation platform used throughout this review is the generalized liquid crystal shape equation that includes surface anchoring elasticity, membrane elasticity, and stress loads from liquid crystals orientation gradients. Clear characterization of surface shapes, curvatures, roughness, that are behind surface functionalities are introduced and applied to strengthen validation of predictions with actual nature’s surfaces. Wrinkling scaling laws, and the dependence of material properties on morphing mechanisms are elucidated. The predictions capture very well the two-scale wrinkling patterns in tulips, wrinkling gradients that display water sensor capabilities, egg carton shapes in rose petals and their potential for cell alignment, and the ability to create surface roughness with targeted kurtosis and skewness to control and optimize friction and tribological functionalities. The results are summarized in terms of surface geometry (open or closed) mechanisms and phenomena (anchoring, membrane elasticity), material properties (anchoring coefficients, membrane bending modulus, Frank elasticity), wrinkling scales and scaling laws (amplitude, wave-lengths, skewness, kurtosis) and functionalities (optical iridescence, friction, wettability, structural color, curvature-driven cell alignment and differentiation). Taken together, the range of surface geometries and surface functionalities captured by the liquid crystal biomimeticin silicoplatform provides a foundation for future experimental green manufacturing pathways based on anisotropic soft matter.

Phase transitions in complex functional liquid crystals—The entropy effect

Liquid crystal design and synthesis are being driven towards always more complexity. The self-assembly of poly- and shape-amphiphiles allow tailoring the soft material structures with double and even triple nanosegregation of functional building blocks. Alignment of the anisotropic liquid crystal is crucial, in order to generate a full control over the material’s function and performance. This procedure often needs an isotropic phase at accessible temperatures without decomposition. The impact of thermodynamic factors, such as cohesive energy density difference and entropy contributions, is discussed in this perspective paper using selected examples. In the process of molecular design such considerations can help to adjust transition temperatures and subsequently, to achieve aligned, complex liquid crystalline matter. This will allow access to new fields of liquid crystal applications.