Linear Range Research Articles

“Eco-friendly HPLC method for analysis of dipyrone and hyoscine in different matrices with biomonitoring”

A selective, precise, and accurate reversed HPLC method has been developed and validated for simultaneous separation and determination of two veterinary drugs, dipyrone and hyoscine, in their combined dosage form in the presence of their official impurities, namely 4-aminoantipyrine and tropic acid, in addition to the formulated preservative: phenol. The linearity range was found to be (1.00–35.00 µg/mL) for dipyrone and (2.50–50.00 µg/mL) for hyoscine. It exhibited a satisfactory linearity regression R (0.9999) for both drugs with LOD 0.22 µg/mL and 0.72 µg/mL and LOQ 0.65 µg/mL and 2.19 µg/mL for dipyrone and hyoscine, respectively. Additionally, the two cited drugs were also determined in the presence of dipyrone active metabolite 4-aminoantipyrine using diclofenac as an internal standard in bovine urine. The linearity range was found to be (15–75 µg/mL) for dipyrone, (2.5–60 µg/mL) for hyoscine, and (2.5–60 µg/mL) for 4-aminoantipyrine with linearity regression R (0.9999–0.9998). The LLOQ (15, 2.5, 2.5 µg/mL), LQC (45, 7.5, 7.5 µg/mL), MQC (55, 25, 25 µg/mL), and HQC (60, 50 50 µg/mL) were determined for dipyrone, hyoscine and 4-aminoantipyrine, respectively. UV detection was carried out at 220 nm. The method was validated according to the ICH guidelines, as well as according to FDA guidelines for determining both drugs in bioanalytical matrices and both proved accuracy and precision. A statistical comparison was made between the results obtained and those obtained by the reported method, showing no significant difference in accuracy and precision at p = 0.05. The suggested method was proved eco-friendly through a greenness assessment using two different tools (The analytical eco-scale scored 83, and the AGREE-Analytical Greenness Metric approach scored 0.83). The suggested method can be used in the routine work of quality control labs, screening for drug abuse, and ensuring clean sport for horse racing.

Quantification of morphine in exhaled breath condensate using a double network polymeric hybrid hydrogel functionalized with AuNPs

BackgroundMorphine serves as a foundation for creating other opioid derivatives, such as hydro/oxymorphine and heroin, which possess enhanced pain-relieving properties but are also prone to addiction and abuse. In cases of morphine overdose, it not only affects multiple immune functions but can also cause severe health complications. Given these concerns and the widespread use of morphine, it is crucial to develop efficient, uncomplicated, and precise methods for accurately detecting morphine in various biological and pharmaceutical samples.ResultsIn this investigation, a novel gold nanoparticle (AuNPs)-based double network hydrogel (DNH) nanoprobe has been fabricated for sensitive quantification of morphine in exhaled breath condensate samples. For that, gelatin/agarose DNH was fabricated through a one-step heating-cooling method in the presence of AuNPs, providing not only chemical stability but also prevent the AuNPs aggregation during synthesis process. In this method, the absorbance intensity of the nanoprobe gradually decreased with increasing morphine concentration due to the interaction morphine with AuNPs surface plasmon. The aggregation of AuNPs by addition of morphine was verified by UV-Vis spectrophotometry. The sensor displayed high sensitivity with detection limit of 0.006 µg.mL-1 in the linear range from 0.01 to 1.0 µg.mL-1. A reliable performance was attained for the spectrophotometric method for determination of morphine in the real samples.

Flexible Tactile Sensors with Gradient Conformal Dome Structures.

The trade-off between high sensitivity and wide detection range remains a challenge for flexible capacitive pressure sensors. Gradient structure can provide continuous deformation and lead to a wide sensing range. However, it simultaneously augments the distance between two electrodes, which diminishes the variation in the relative distance and results in a decreased sensitivity. Herein, a conformal design is introduced into the gradient structure to construct a flexible capacitive pressure sensor. The gradient conformal dome structure is fabricated by a simple reverse dome adsorption process. Taking advantage of the progressive deformation behavior of the gradient dielectric, and the significant improvement of relative distance variation between two electrodes from the conformal design, the sensor achieves a sensitivity of 0.214 kPa-1 in an ultrabroad linear range up to 200 kPa. It maintains high-pressure resolution under the preload of 10 and 100 kPa. Benefiting from the rapid response and excellent repeatability, the sensor can be used for physiological monitor and human motion detection, including arterial pulse, joint bending, and motion state. The gradient conformal design strategy may pave a promising avenue to develop pressure sensors with high sensitivity and wide linear range.

Ultrasensitive Electrochemiluminescence Biosensor with ZIF-67@MXene as an Efficient Co-Reaction Accelerator and Plasmonic Nanozyme as a Smart Signal Amplification Probe.

Exploring novel electrochemiluminescence (ECL) co-reaction accelerators to construct ultrasensitive sensing systems is a prominent focus for developing advanced ECL sensors. However, challenges still remain in finding highly efficient accelerators and understanding their promoting mechanisms. In this paper, ZIF-67@MXene nanosheet composites, with highly conductive in-plane structure and confined-stable pore/channel, are designed to act as high-efficient co-reaction accelerators and achieve a significant enhancement in the luminol-H2O2 based ECL system. Mechanism investigation suggests that hydroxyl radicals (·OH) and singlet oxygen (1O2) can be selectively and preferentially generated on ZIF-67@MXene due to the stable and efficient absorption of ·OH and 1O2, leading to a remarkable enhancement in the ECL efficiency of luminol (830%). Finally, by designing a plasmonic NH2-MIL-88@Pd nanozyme, an "on-off" switch immunosensor is constructed for the detection of prostate-specific antigen (PSA). Based on the multiple signal amplification effect, the linear detection range for PSA is expanded by three orders of magnitude. The detection limit is also improved from 1.44 × 10-11 to 9.1 × 10-13 g mL-1. This work proposes an effective method for the preparation of highly efficient co-reaction accelerators and provides a new strategy for the sensitive detection of cancer markers.

Preparation and application of a pseudo-templated multi-monomer aflatoxins imprinted polymer.

Afunctional material was developedwith specific recognition properties for aflatoxins for pre-processing enrichment and separation in the detection of aflatoxins in Chinese herbal medicines. In the experiment, ethyl coumarin-3-carboxylate, which has a highly similar structure to the oxonaphthalene o-ketone of aflatoxin, was selected as a pseudo-template, zinc acrylate, neutral red derivative, and methacrylic acid, which have complementary functions, were selected as co-monomers to prepare a pseudo-template multifunctional monomer molecularly imprinted polymer (MIP). The MIP obtained under the optimal preparation conditions has a maximum adsorption capacity of 0.036mg/mg and an imprinting factor of 3.67. The physical property evaluation of the polymers by Fourier infrared spectrometer, scanning electron microscopy, pore size analyzer, thermogravimetric analyzer, and diffuse reflectance spectroscopy showed that the MIP were successfully prepared and porous spherical-like particles were obtained. The synthesized polymer was used as a solid-phase extraction agent for the separation of aflatoxins from the extract of spina date seed. The linear range of the developed method was 10-1000ng/mL, the limit of detection was 0.36ng/mL, the limit of quantification was1.19ng/mL, and the recoveries of the extracts at the concentration level of 0.2μg/mL were in the range 88.0-93.4%, with relative standard deviations (RSDs) of 1.97% (n). The results showed that the preparation of MIPs using ethyl coumarin-3-carboxylate as a template was simple, economical, and convenient. It is expected to become a promising functional material for the enrichment and separation aflatoxins from complex matrices.

An ultra-sensitive suboptimal protospacer adjacent motif enhanced rolling circle amplification assay based on CRISPR/Cas12a for detection of miR-183

IntroductionMicroRNAs (miRNAs) have been recognized as promising diagnostic biomarkers for Diabetic Retinopathy (DR) due to their notable upregulation in individuals with the condition. However, the development of highly sensitive miRNAs assays for the rapid diagnosis of DR in clinical settings remains a challenging task.MethodsIn this study, we introduce an enhanced CRISPR/Cas12a assay, leveraging suboptimal PAM (sPAM)-mediated Cas12a trans-cleavage in conjunction with rolling circle amplification (RCA). sPAM was found to perform better than canonical PAM (cPAM) in the detection of Cas12a-mediated ssDNA detection at low concentrations and was used instead of canonical PAM (cPAM) to mediate the detection. The parameters of reactions have also been optimized.Results and discussionIn comparison with cPAM, sPAM has higher sensitivity in the detection of ssDNA at concentrations lower than 10 pM by Cas12a. By replacing cPAM with sPAM in the padlock template of RCA, ultra-high sensitivity for miR-183 detection is achieved, with a detection limit of 0.40 aM. within 25 min and a linear range spanning from 1 aM. to 1 pM. Our assay also exhibits exceptional specificity in detecting miR-183 from other miRNAs. Furthermore, the applicability of our assay for the sensitive detection of miR-183 in clinical serum samples is also validated. This study introduces a groundbreaking assay with excellent performance through a simple modification, which not only addresses existing diagnostic challenges, but also opens exciting new avenues for clinical diagnosis in the realm of DR.

Schottky Interface Enabled Electrospun Rhodium Oxide Doped Gold for Both pH Sensing and Glucose Measurements in Neutral Buffer and Human Serum.

This study has focused on adjusting sensing environment from basic to neutral pH and improve sensing performance by doping electrodeposited gold (Au) with metal oxide for nonenzymatic glucose measurements in forming a Schottky interface for superior glucose sensing with detailed analysis for the sensing mechanism. The prepared sensor also holds the ability to measure pH with the identical electrospun metal oxide-electrodeposited Au, which composed a dual sensor (glucose and pH sensor) through applying chronoamperometry and open circuit potential methods. The rhodium oxide nanocoral structure was fabricated with an electrospinning precursor solution, followed by a calcination process, and it was mixed with electrodeposited nanocoral gold to form the Schottky interface by constructing a p-n type heterogeneous junction for improved sensitivity in glucose detection. The prepared materials were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectrometry (XPS), etc. The prepared materials were used for both pH responsive testing and amperometric glucose measurements. The rhodium oxide nanocoral doped gold demonstrated a sensitivity of 3.52 μA mM-1 cm-2 and limit of detection of 20 μM with linear range up to 3 mM glucose concentration compared to solely electrodeposited gold for a sensitivity of 0.46 μA mM-1 cm-2 and a limit of detection of 450 μM. The Mott-Schottky method was used for the analysis of an electron transfer process from noble metal to metal oxide to electrolyte in demonstrating the improved sensitivity at neutral pH for glucose measurements due to the Schottky barrier adjustment mechanism at an applied flat band potential of 0.3 V. This work opens a new venue in illustrating the metal oxide/metal materials in the glucose neutral response mechanism. In the end, human serum samples were tested against current commercial glucose meter to certify the accuracy of the proposed sensor.

In Situ Photoelectrodeposited Polyaniline on Ti‐Doping Hematite For Highly Selective Photoelectrochemical Oxygen Demand Determination

AbstractChemical Oxygen Demand (COD), as a detection indicator of water pollution, is of particular importance in assessing organic pollution in water. Furthermore, accurate and simple measuring COD methods are essential for water quality assessment and pollution control. However, the photoelectrochemical oxygen demand (PECOD) measurement, as one of the measuring COD methods, is affected by the reaction of water splitting, which is one of the hindrances to the commercialization of the analytical method of the PeCOD measurement. Hence, to overcome this challenge, a new PANI/Ti:Fe2O3 photoanode is constructed by hydrothermal and photoelectrochemical (PEC) deposition methods and investigated their optical properties and photoactivity. Under optimization conditions, it is discovered that the oxidation of organic compounds produces a net steady‐state current (inet) is directly proportional to COD concentration, with a detection limit of 1 mM glucose solution and a wide linear detection range of 1–78.125 mM, which is suitable for high concentration of glucose detection. As has been noted, PANI/Ti:Fe2O3 photoanode overcomes the obstacles to the practical application and eventual commercialization of the PECOD technology.

Molecular imprinting based sensor system developed using polymeric nanoparticles for detecting 17β‐estradiol in agricultural wastewater

AbstractMicro pollutants pose a significant issue in water ecosystems. Particularly high concentrations of 17β‐estradiol (E2) have been identified in agricultural wastewater, which poses harmful effects on aquatic organisms and disrupts ecosystem balance. Therefore, effective determination of E2 from water sources is crucial. This study developed a biosensor capable of detecting E2 in wastewater using specific polymer nanoparticle synthesis through molecular imprinting. Est‐imp‐poly(multi‐walled carbon nanotubes‐glycidyl methacrylate [MWCNT‐GMA]) polymer nanoparticles were synthesized using a surfactant‐free emulsion polymerization method, and their characterization was conducted using FTIR and scanning electron microscopy (SEM) technologies. The Qmax value for Est‐imp‐poly(MWCNT‐GMA) nanoparticles in a 1 mg/mL E2 solution was determined to be 140 ppm. Comparing adsorption capacities, the molecularly imprinted nanoparticles (MIP) showed nearly five times higher E2 adsorption compared to non‐imprinted polymers (NIP). The Est‐imp‐poly(MWCNT‐GMA)‐Nafion/screen‐printed electrode (SPE) system was employed for analyzing wastewater samples. The current measurements taken at various concentrations in the wastewater consistently matched the E2 concentration calibration curve. The limit of detection (LoD) and limit of quantification (LoQ) were determined to be 0.042 and 0.12 μM, respectively. The biosensor demonstrated a linear working range from 0.12 to 50 μM, with a high correlation coefficient (R2 = 0.9927). These results highlight the potential of the developed biosensor for detecting E2 in real samples.

Biosensor Based on ZIF-67-HRP and MWCNTs Nanocomposite Modified Glass Carbon Electrode for the Detection of Luteolin in Vegetables.

Luteolin has various pharmacological properties, including anti-inflammatory, antioxidant, and antitumor characteristics. Due to its potential value in drugs and functional foods, it is important to develop an efficient method for detecting luteolin. In this work, the poor selectivity of existing luteolin nonenzymatic sensors was solved by translating the enzyme-catalyzed reaction from bulk solution to the surface of a horseradish peroxidase (HRP) modified electrode through an electrocatalytic oxidation process. Here, we modified the surface of a glassy carbon electrode (GCE) with metal-organic frameworks (MOFs; ZIF-67 here, abbreviated as ZIF), functional nanomaterials, and HRP and finally covered it with Nafion (NF). In this case, luteolin acts as a hydrogen donor, and the electrode acts as a hydrogen acceptor; the oxidation reaction occurs on the electrode surface. The use of ZIF-67 ensured the conformational stability of HRP to ensure the selectivity and anti-interference property, and SDS-dispersed multiwalled carbon nanotubes (MWCNTs) enhanced the electrode conductivity. The use of NF avoids shedding of the electrode material during the testing process. A UV-vis spectrophotometer was used to study the selectivity of luteolin by HRP and the compatibility between HRP and ZIF. The materials were characterized and analyzed by scanning electron microscopy and transmission electron microscopy. Due to the synergistic effect of these nanomaterials, the linear range of NF/ZIF-HRP/MWCNTs-SDS/GCE was 1.0 × 10-2 to 6.0 μM, with detection limits of 25.3 nM (S/N = 3). The biosensor showed long-term stability and reproducibility, with a relative standard deviation of 4.2% for the peak current (n = 5). Finally, the biosensor was successfully used to detect luteolin in carrots, celery, and cauliflower.

Fluorescent and polarity-switchable photoelectrochemical dual-mode homogeneous sensing platform for ultrasensitive kanamycin detection based on EXO III-driven signal amplification.

Afluorescent and photoelectrochemical (PEC) dual-mode biosensor based on target biorecognition-triggered cyclic amplification was constructed for Kana detection. With the assistance of the catalyzed reaction of exonuclease III, a Kana-aptamer DNA duplex was designed for conducting the cyclic release of G-rich DNA sequence as well as output DNA S2. The released G-rich sequence triggers the fluorescence (FL) of thioflavin T (ThT), the intensity of which is positively correlated with the Kana concentration. The linear range is 0.2 to 30nM, and the detection limit reaches 0.07nM. Simultaneously, the released output DNA S2 was captured by Fe3O4@CdTe-probe ssDNA and then combined with methylene blue to realize the transduction of polarity-reversed PEC signal, leading to the sensitive detection of Kana with a linear range of 0.2 to 40nM and a calculated detection limit of 0.2nM. The outstanding performance endows the dual-mode biosensor a promising prospect for practical application.

A silicon-based functional self-assembled aptasensor for the detection of aflatoxin B1 by SERS sensing.

One of the most harmful contaminants found in corn and its products is aflatoxin B1 (AFB1) and thus developing reliable detection methods is of great significance to consumers and the food industry. In this research, AuMBA@Ag nanoparticles (NPs) and AgNPs deposited on a silicon wafer (Si@AgNPs) were functionalized with an aptamer and its complementary strand, respectively, and self-assembled into a SERS aptasensor, which generated strong SERS signals. AFB1 bound to the aptamer prior to the complementary chain, causing AuMBA@Ag NPs to detach from Si@AgNPs. The complex dissociated, leading to a decrease in signal intensity from the solid-phase substrate. Under optimal conditions, the linear detection range was 0.05-20.0 ng mL-1, and the detection limit was 0.039 ng mL-1. Notably, the aptasensor demonstrated a recovery rate between 92.77% and 110.13% when utilized for the detection of AFB1 in corn flour and oil, indicating its good potential for detecting AFB1 in real sample matrices. In conclusion, a quantitative and reliable specific SERS detection system for AFB1 was developed in this study with significant applicability to food safety.

A double-conducting polymer nanowire-based electrochemical aptasensor for highly sensitive and low fouling detection of cortisol in saliva.

Acortisol biosensor was developedbased on double-conducting polymer nanowires, which exhibits excellent conductivity, resistance to biological contamination, and outstanding sensing performance. The biosensor employs dual-mode electrochemical techniques, namely, differential pulse voltammetry (DPV) and chronoamperometry (CA), for the sensitive and low fouling detection of the glucocorticoid hormonecortisol. Experimental results demonstrated that the linear detection range of the biosensor in DPV mode was 1.0 × 10-14-1.0 × 10-8M, with a detection limit of 0.131 × 10-14M. In CA mode, the biosensor exhibited a detection range of 1.0 × 10-13-1.0 × 10-7M and a detection limit of 0.313 × 10-13M. The biosensor was successfully utilized for the rapid detection of cortisol in human saliva. The combination of a high-specificity cortisol aptamer and functionalized double-conducting polymer nanowires ensured the exceptional specificity and sensitivity of the biosensor in detecting real biological samples.

One-step hydrothermal synthesis of F,N,S-doped photoluminescent carbon dots with yellowish-orange emission for sensitive Cu2+ ion detection: Environmental and biomedical applications

Herein, fluorine-, nitrogen-, and sulfur-doped carbon dots (FNS-CDs) were prepared via a one-step hydrothermal synthesis using flufenamic acid and thiourea as precursors, which showed yellowish-orange fluorescence both in aqueous solution and in the solid state. The as-prepared FNS-CDs were monodisperse and had an average diameter of 4 nm, good water solubility, a fluorescence quantum yield of 18.63 %, and excellent pH and ionic strength stability. The optimal excitation/emission wavelengths of the FNS-CDs were 406/570 nm, with an excitation-dependent wavelength range of 365–435 nm. The surface states, morphologies, and elemental compositions of the FNS-CDs were characterized using FTIR, XRD, TEM, and XPS. In addition, the FNS-CDs without any further modification exhibited high selectivity and sensitivity as nanosensors for Cu2+ over other metal ions. The PL quenching phenomenon can be used to detect Cu2+ ions within a linear range of 1–25 μM with a detection limit of 83.10 nM and an association constant of 1.29 × 104 M−1. The PL of the FNS-CDs was significantly quenched by Cu2+ ions through static quenching and was restored upon the subsequent addition of EDTA. The practical application was demonstrated through the detection of Cu2+ ions in real water samples, yielding recovery rates ranging from 97.8 % to 103.9 % with an RSD below 2.5 %. The FNS-CDs/Cu2+ complex exhibits potent antibacterial activity against S. aureus (85.27 %±2.1 %) and E. coli (91.31 %±1.6 %), whereas the FNS-CDs/Cu2+ has a higher inhibitory effect on the growth of E. coli. Furthermore, the FNS-CDs (100 μg/mL) were used for cell imaging, showing low toxicity to HCT-116 cells exhibited yellowish-orange fluorescence under a confocal microscope.

Preparation of copper and phosphorus co-doped three-dimensional layered hexagonal cobalt nanodisks for monitoring nitrobenzene in environmental pollutants

In this study, copper and phosphorus co-doped three-dimensional layered hexagonal cobalt nanodiscs were synthesized using a rapid and simple method and were applied for the detection of nitrobenzene, an environmental pollutant. The incorporation of phosphorus into the nanodiscs created catalytic sites, while the addition of copper increased the density of active sites and facilitated rapid charge transfer. Co-doping phosphorus and copper allowed the CuCo NDs/P composite material to exhibit excellent catalytic activity towards nitrobenzene. Experimental results demonstrated that CuCo NDs/P had a lower detection limit and a broader linear range. Additionally, the sensor was tested on natural water samples to evaluate its practical feasibility, indicating significant potential for further development.

RP-CAD for Lipid Quantification: Systematic Method Development and Intensified LNP Process Characterization

Lipid nanoparticles (LNPs) and their versatile nucleic acid payloads bear great potential as delivery systems. Despite their complex lipid composition, their quality is primarily judged by particle characteristics and nucleic acid encapsulation. In this study, we present a holistic reversed-phase (RP)-charged aerosol detection (CAD)-based method developed for commonly used LNP formulations, allowing for intensified LNP and process characterization. We used an experimental approach for power function value (PFV) optimization termed exploratory calibration, providing a single PFV (1.3) in an appropriate linearity range for all six lipids. Followed by the procedure of method calibration and validation, linearity (10–400 ng, R2 > 0.996), precision, accuracy, and robustness were effectively proven. To complement the commonly determined LNP attributes and to evaluate the process performance across LNP processing, the developed RP-CAD method was applied in a process parameter study varying the total flow rate (TFR) during microfluidic mixing. The RP-CAD method revealed a constant lipid molar ratio across processing but identified deviations in the theoretical lipid content and general lipid loss, which were both, however, entirely TFR-independent. The deviations in lipid content could be successfully traced back to the lipid stock solution preparation. In contrast, the observed lipid loss was attributable to the small-scale dialysis following microfluidic mixing. Overall, this study establishes a foundation for employing RP-CAD for lipid quantification throughout LNP processing, and it highlights the potential to extend its applicability to other LNPs, process parameter studies, or processes such as cross-flow filtration.

Confinement synthesis of few-layer MXene-cobalt@N-doped carbon and its application for electrochemical sensing

Herein, the few-layer Ti3C2Tx nanosheets loaded zeolitic imidazolate framework-67 nanoplates (Ti3C2Tx-ZIF-67) with a unique structure has been synthesized by surfactant control method, and then is employed as the core of precursor. A thin layer of polydopamine as the shell of precursor covered Ti3C2Tx-ZIF-67 forms a micro-nano reactor, leading to the confinement carbonization process. Consequently, a novel sensing material that few-layer Ti3C2Tx nanosheets loaded Co nanoparticles coated N-doped carbon (Ti3C2Tx-Co@NC) is obtained for the non-enzymatic determination of glucose. Owing to the impressive structure, the established glucose sensor based on Ti3C2Tx-Co@NC/glassy carbon electrode exhibits 0.5–100.0 μM of linear detection range and 66.8 nM of detection limit, which tends to detect low concentration of glucose. The synergistic few-layer Ti3C2Tx nanosheets, Co nanoparticles and NC are considered through a series of control experiments. First, few-layer Ti3C2Tx nanosheets provide a good transport channel for electron transfer, resulting in the lower steric hindrance. Second, Co nanoparticles provide active centers for the electrochemical detection. Third, N-doped carbon with conductivity and hydrophilia plays the role of stabilizing material structure to prevent the fragmentation of Ti3C2Tx and the agglomeration of Co nanoparticles. Such work proposes a confined strategy to develop MXene-ZIF-67-derived nanocomposite with high-performance structure.

Determination of 3-Phenoxybenzoic Acid by an Improved Enzyme-Linked Immunosorbent Assay (ELISA) by the Immobilization of Nanobodies with Streptavidin and Biotin

Nanobodies (Nbs) are single domain antibodies that are frequently utilized in enzyme-linked immunosorbent assays (ELISAs). However, a major limitation of nanobodies is their low sensitivity in capture assays. To address this issue, the combination of streptavidin and biotin can be employed to immobilize the nanobodies on plates in an oriented manner, thereby exposing their binding sites. In this study, nanobodies specific to 3-phenoxybenzoic acid (3-PBA) were biotinylated at their C-termini and immobilized onto streptavidin-coated microplates. A direct competitive ELISA was developed for the determination of 3-phenoxybenzoic acid in ovine and bovine urine. Compared to directly coating the nanobodies, the streptavidin-bridged nanobody capture-based ELISA demonstrated improved sensitivity, with a 16.6% enhancement, and a half-maximum inhibition concentration (IC50) of 2.05 ng/mL. The developed assay provided a linear range from 0.27 to 20.2 ng/mL (IC20-IC80) and a limit of detection (LOD) of 0.1 ng/mL. The average recoveries of 3-phenoxybenzoic acid spiked in the urine ranged from 82.57% to 102.75% and were consistent with values obtained by liquid chromatography – mass spectrometry (LC-MS). These findings demonstrate that the streptavidin-bridged capture nanobody-based ELISA significantly enhanced the sensitivity for the determination of 3-phenoxybenzoic acid residues in animal urine.

A convenient colorimetric assay for Cr(VI) detection based on homogeneous Cu(II)–GMP system with oxidoreductase-like activity

Hexavalent chromium (Cr(VI)) is an environmental pollutant and recognized as a human carcinogen. Therefore, it is necessary to develop a simple and sensitive detection technique for Cr(VI). Herein, it is found that Cu2+ interacts with guanosine 5'-monophosphate (GMP) to form a homogeneous Cu(II)-GMP complex (Cu2+·GMP) that efficiently displays the oxidoreductase-like catalytic activity. Cu2+·GMP can catalyze the oxidation between Cr(VI) and substrate 3,3',5,5'- tetramethylbenzidine (TMB), resulting in color change recognized by the naked eyes. Base on this, a convenient colorimetric assay for Cr(VI) detection was developed. The detection limit (3σ/s) of this sensor for Cr(VI) was 23nM with a linear range of 0.1-25μM. Moreover, the proposed assay was successfully applied to detect Cr(VI) in different environmental water samples with satisfactory recoveries. Our method is simple, efficient, rapid and cost-effective for Cr(VI) detection without the need for complicated material preparation or special separation, which shows great potential in environmental monitoring.

Fe3O4@gC3N4@Thiamine: a novel heterogeneous catalyst for the synthesis of heterocyclic compounds and microextraction of tebuconazole in food samples

Graphite carbon nitride (g-C3N4) is a two-dimensional nano-sheet with electronic properties, which shows unique characteristics with high chemical and thermal stability in its structure. The functionalization of these compounds through covalent bonding is an important step towards significantly improving their properties and capabilities. To achieve this goal, a novel strategy for the covalent functionalization of Fe3O4@g-C3N4 with thiamine hydrochloride (vitamin B1) via cyanuric chloride (TCT), which is a divalent covalent linker, was presented. The efficiency of Fe3O4@gC3N4@Thiamine as a heterogeneous organic catalyst in the synthesis of spirooxindole-pyran derivatives and 2-amino-4H-pyran under solvent-free conditions was evaluated and the yields of high-purity products were presented. In addition, easy recycling and reuse for seven consecutive cycles without significant reduction in catalytic activity are other features of this catalyst. Moreover, the performance of the prepared sorbent in the microextraction technique (herein, magnetic solid phase extraction) was studied. The tebuconazole was selected as the target analyte. The target analyte was extracted and determined by HPLC–UV. Under the optimum condition, the linear range of the method (LDR) was estimated in the range of 0.2–100 μg L−1 (the coefficient of determination of 0.9962 for tebuconazole). The detection limit (LOD) of the method for tebuconazole was calculated to be 0.05 µg L−1. The limit of quantification (LOQ) of the method was also estimated to be 0.16 µg L−1. In order to check the precision of the proposed method, the intra-day and inter-day relative standard deviations (RSD%) were calculated, which were in the range of 1.5- 2.8%. The method was used for the successful extraction and determination of tebuconazole in tomato, cucumber, and carrot samples.