Linear Solvation Energy Relationships Research Articles

Solvent and media effects on the photophysics of cranad-2 and cranad-58

Alzheimer’s disease (AD) represents the most widespread form of age-related cognitive degeneration, characterized by long-term degenerative damage, cognitive dysfunction, and profound deficits in logical thinking, knowledge acquisition, and interpersonal communication. A principal biomarker of AD involves the emergence and aggregation of β-amyloid (Aβ) plaques. Cranad derivatives are fluorescent probes capable of detecting, quantifying, and imaging Aβ. In this work, the effect of solvent and microheterogeneous environments on the photophysical behavior of CRANAD-2 and CRANAD-58 was investigated employing a large solvent set and several microorganized systems. Both the absorption and fluorescence spectra exhibit a substantial solvatochromic effect, resulting in significant Stokes shifts. Application of linear solvation energy relationships to correlate the fluorescence spectra maxima and the Stokes shift with microscopic solvent parameters suggests significant intramolecular charge transfer during the excitation, as corroborated by the increased dipole moment in the excited state. Generally, fluorescence quantum yields determined for CRANAD-2 exceed those of CRANAD-58 in most solvents, with low values in polar solvents and bigger values in non-polar solvents. Introduction of CRANAD-2 and CRANAD-58 into micellar and vesicular solutions notably augments the fluorescence emission intensity, accompanied by a blue shift in the fluorescence maxima. The fluorescence maxima values observed within microheterogeneous systems closely parallel those reported for interactions between CRANAD derivatives and soluble or aggregated Aβ amyloids which potentially constrains the efficacy of “in vivo” Aβ detection trials, because localization of CRANAD derivatives in non-polar microenvironments present in biological media could interfere with the detection of amyloid fibers.

Determination of ionization/protonation constant values of some guanine derivative drugs by traditional/ green RPLC and UV–Vis spectrophotometric methods

In this study, the greenreverse-phase liquid chromatography (RPLC) method was used in addition to the traditional RPLC method to determine the ionization/protonation constants (pKa) of the guanine derivatives ganciclovir, valacyclovir, and valganciclovir. The determination of these values was carried out in binary acetonitrile–water mixtures (for the traditional RPLC method), ethanol–water binary mixtures (for the green RPLC method), and in aqueous solution of a micelle-forming surfactant (for pure micellar chromatography). The pKa values sspKa of the compounds were calculated using the linear solvation energy relationship (LSER) method in the studied hydro-organic and micellar solvent-free mixtures. Moreover, the UV–Vis spectrophotometric method was used to compare the sspKa values of ganciclovir, valaciclovir, and valganciclovir obtained in a acetonitrile–water medium using another method. The pKa values ​​of the examined compounds in water were calculated using the linear relationship between the sspKa values ​​determined in hydroorganic mixtures and some macroscopic values ​​of acetonitrile and ethanol. Additionally, wwpKa values ​​were determined in the micellar solvent-free mobile phase. Subsequently, the wwpKa values calculated by these direct and indirect methods were compared and the agreement between them was excellent. By using the wwpKa value calculated for each compound, the ionization percentages were calculated at different pH (1–12) values with the Henderson-Hasselbalch equation. The environmental impact of the RPLC methods used in this study was assessed using the green metrics tools GAPI and AGREE. The result of the investigation was that the environmental suitability of the green methods is satisfactory.

Standard partial molar volumes of single aqueous ions composing ionic liquids. Measurement and evaluation of temperature dependent values. Parsing and LSER correlation with molecular descriptors based on DFT/COSMO approach

The densities of highly dilute aqueous solutions (m < 0.2 mol·kg−1) of 50 common ionic liquids (ILs) or related salts were accurately measured at seven equidistant temperatures in the range of (288.15 to 318.15) K and ambient pressure. The examined set of ILs/salts composed of 31 ions was judiciously selected to cover wide ranges of ion sizes and chemical structures and allow reliable evaluation of ionic contributions. The data were duly analyzed to infer related thermodynamic properties and information on the behavior of these systems on a molecular level. Appropriate means of mathematical statistics were used to estimate data uncertainties, assign weights to data correlations, and judge the significance of the results obtained. The standard partial molar volumes V¯∞ of the ILs/salts at infinite dilution were evaluated through fitting the concentration dependence of respective apparent molar volumes to Redlich-Meyer equation and their temperature dependence was correlated to quadratic polynomial. The data presented were compared whenever possible with those available in the literature; good agreement was often found, although some data from the literature were also considerably dispersed or in error. Standard partial molar volumes of ILs/salts obeying ionic additivity were split by least-squares optimization into temperature-dependent single-ion values based on the Conway-Millero extrathermodynamic assumption. The ionic additivity of BV parameter was also identified. Its magnitude for anions is typically greater than that for cations, supporting the fact that an anion dominates the volumetric behavior of aqueous ILs. As the BV,anion and the second temperature derivative ∂2V¯anion∞/∂T2 were found to correlate, the two solute’s water structure making/breaking ability indicators appear to speak consistently. Enhanced values of standard partial molar expansion were observed for both strongly kosmotropic and chaotropic anions and a plausible explanation of this phenomenon was suggested. To correlate and analyze the effect of ionic structure on V¯ion,298∞, Linear Solvation Energy Relationship (LSER) methodology with the recently proposed four quantum chemistry computed descriptors based on DFT/COSMO approach was employed providing excellent fit (SD = 2.48 cm3·mol−1, R2 = 0.9996).

Preparation of dicationic ionic liquid modified silica stationary phase for mixed-mode liquid chromatography and its application for food additive detection

BackgroundFood safety has become an essential aspect of public concern and there are lots of detection means. Liquid chromatography plays a dominating role in food safety inspection because of its high separation efficiency and reproducibility. However, with the increasing complexity of real samples and monitoring requirements, conventional single-mode chromatography would require frequent column replacement and cannot separate different kinds of analytes on a single column simultaneously, which is costly and time-consuming. There is a great need for fabricating mixed-mode stationary phases and validating the feasibility of employing mixed-mode stationary phases for food safety inspection. ResultsThis work fabricated multifunctional stationary phases for liquid chromatography to determine diverse food additives under the mixed mode of RPLC/HILIC/IEC. Two dicationic ionic liquid silanes were synthesized and bonded onto the silica gel surface. The functionalized silica was characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and elemental analysis. Both columns provide satisfactory separation performance towards 6 hydrophilic nucleosides, 4 hydrophobic polycyclic aromatic hydrocarbons, and 5 anions. Great repeatability of retention (RSD < 0.1%) and column efficiency (100330 plate/m) were obtained. Thermomechanical analysis and linear solvation energy relationship investigated the retention mechanism. Finally, the better in two prepared columns was employed to separate and determine the contents of NO2- and NO3- in vegetables(highest 4906 mg kg-1 NO3- in spinach ), preservatives in bottled beverages (180.8 mg kg-1 sodium benzoate in soft drink), and melamine in milk with satisfactory performance and recovery rates ranging from 96.4% to 105.6%. SignificanceThis work developed a novel scheme for preparing mixed-mode stationary phases by dicationic ionic liquid which provides great separation selectivity. Most importantly, this work proved the superiority of employing mixed-mode stationary phases for food safety inspection, which might avoid high-cost and frequent changes of columns and chromatography systems in the near future.

Investigation on itraconazole solubility in aqueous solutions based on models, solvent effect, thermodynamic analysis and quantum chemical calculations

The mole-fraction solubility of itraconazole in four aqueous blends of ethanol/isopropanol/DMSO/methanol within the temperature range of 283.15 to 323.15 K was experimentally obtained using the isothermal shake-flask method. Under the identical temperature and ethanol/isopropanol/DMSO/methanol composition, itraconazole solubility in DMSO+water is much higher than that in ethanol/isopropanol/methanol + water. At the same temperature, the solubility increases monotonically with organic solvent concentration. X-ray power diffraction analysis demonstrated that over the course of the investigations, there was no crystal transition or solvate formation. The modified van’t Hoff-Jouyban-Acree and Jouyban-Acree models adequately related the solubility to solvent composition and temperature, with relative average deviations (RADs) not exceeding 7.65 %. Furthermore, the extended Hildebrand solubility approach was utilized to quantitatively characterize the solubility behavior at 298.15 K for the mixtures of ethanol/isopropanol/DMSO/methanol plus water. In both instances, the RADs were maintained below 4.12 %. The solubility parameter and dipolarity-polarizability of solutions have a major impact on the solubility fluctuation, as indicated by the analysis of the linear solvation energy relationship. The preferential solvation of itraconazole at 298.15 K was examined using the efficient approach of inverse Kirkwood-Buff integrals. The preferred solvation parameters showed positive values in blends within rich and moderate ethanol/isopropanol/DMSO/methanol composition regions. This suggests that the organic solvents preferentially solvated itraconazole. When itraconazole dissolved in the blends, thermodynamic analysis of the entropy-enthalpy compensation and dissolution parameters revealed both an endothermic and an enthalpy-driven mechanism. Furthermore, the microscopic electrostatic characteristics of basicity and acidity were effectively demonstrated by means of the electrostatic potential of molecular surface. The −C=O and −N=groups of the itraconazole molecule, which link the five-membered ring, are the primary targets of the electrophilic attack. An independent gradient model based on Hirshfeld partition analysis was used to demonstrate the weak interactions between itraconazole and solvents.

A Collection of Dispersion Induction DI, Electrostatic ES, and Hydrogen Bonding α1 and β1 Parameters for 380 Solvents and What They Say on Solvent Effects on Rates, Equilibria, and Spectra.

The solvent parameters DI, ES, α1, and β1 are intended for the description of solute-solvent intermolecular forces, i.e., dispersion-induction, electrostatic, hydrogen-bond donation, and hydrogen-bond acceptance, respectively. An up-to-date collection of these parameters is presented for 380 solvents including green solvents, ionic liquids, and deep eutectic solvents. Their determination for additional solvents requires three commercial indicators, betaine dye B(30), 4-F-phenol, and 4-F-anisole (as well as the refractive index). The chemical significance of these parameters is outlined. Their use in the linear solvation energy relationship P = P° + di DI + e ES + a α1 + b β1 for 62 physicochemical properties P (reaction rates, equilibrium constants, and IR, UV, and NMR spectra) yields determination coefficients generally greater than 0.90 and regression coefficients whose sign and relative magnitude provide consistent information on the intermolecular forces acting on these properties.

Comparison of Classical and Green RPLC Methods in the Determination of pKa Values of Some Piperazine Group Antihistamines.

In this study, protonation constant values and liquid chromatographic behaviors of hydrophobic cyclizine, chlorcyclizine, hydroxyzine, cinnarizine, cetirizine, meclizine, and buclizine in some water-organic solvent binary mixtures were examined for the first time using classical and green reverse phase liquid chromatography methods. In the isocratic study, the relationship of the retention time and mobile phase pH in water-organic solvent binary mixtures containing acetonitrile (45, 50, 55, 60, 65%, v/v), methanol (60, 65, 70, 75%, v/v) and ethanol (45, 50, 55, 56, 59, 60, 62, 65%, v/v) were determined at 37 °C. In the study, XBridge C18 and Gemini NX C18 columns suitable for the chemical properties of basic compounds were used. The obtained liquid chromatographic data were analyzed using the linear solvation energy relationship methodology and the SOLVER program. The aqueous protonation constant values of the investigated compounds were calculated using the linear relationship between the protonation constant data calculated in studied binary mixtures and some macroscopic constant values of the solvents used. The greenness of methods developed using three different solvents was evaluated with the Analytical Greenness Metric Approach, the Green Analytical Procedures Index, and the Green Solvent Selection Tool approaches.

Preparation and post-modified of dicationic ionic liquid stationary phase and their application in mixed-mode liquid chromatography

This work prepared two dicationic ionic liquid stationary phases for mixed-mode chromatography via thioe-ene click reaction, one of which was post-modified by p-tolyl isocyanate. The successful synthesis of two stationary phases was demonstrated by several characterizations. The separation of a wide range of substances, including nucleosides and bases, alkylbenzene, polycyclic aromatic hydrocarbons, anilines, phenols, inorganic anions and organic acids, shows that homemade stationary phases can not only be applie to RPLC/HILIC/IEC mixed-mode chromatography, but also has better separation selectivity than commercial column. Therefore, the post-modification of p-tolyl isocyanate can greatly improve the separation effect in RPLC mode, which proves that this modification method is of research significance. The retention mechanisms of two stationary phases were investigated by varying the chromatographic conditions and linear solvation energy relationships (LSER). In addition, the stationary phase is able to detect preservatives in foods quickly and accurately. In actual sample testing, the limit of detection ≤ 0.074mg·L−1 and the inter-day precision was not more than 3.33 %.

Research on triamterene equilibrium solubility in mono-solvents and aqueous solutions according to solvent effect, models, thermodynamic analysis and quantum chemical calculation

The equilibrium solubilities of triamterene in pure solvents {isopropanol, methanol, n-propanol, water, 1,2-dichloroethane, 2-methoxyethanol, ethyl acetate, acetonitrile, N-methylformamide (NMF), n-butanol, isobutanol and dimethylsulfoxide (DMSO)}, as well as solvent mixtures of methanol/DMSO + water, were determined by dint of the saturation shake-flask technique. Triamterene solubility (105x) rose as the determination temperature rose and fell in the order at 298.15 K: 2-methoxyethanol (453.9) > DMSO (281.3) > NMF (142.6) > methanol (8.424) > n-propanol (1.432) > n-butanol (1.152) > ethyl acetate (0.9441) > isobutanol (0.8738) > acetonitrile (0.7991) > isopropanol (0.7419) > 1,2-dichloroethane (0.5232) > water (0.1795). No crystal transition or solvation in the trial process was shown via X -ray power diffraction patterns. The solvent effects, in which the interactions of solvent–solvent and solvent–solute were considered, were studied via linear solvation energy relationship. Using equations such as Wilson, Apelblat, λh, and NRTL for mono-solvents and Jouyban-Acree as well as modified van't Hoff-Jouyban-Acree for solvent mixtures, the magnitudes of equilibrium solubility were associated. The greatest relative average deviation of 5.787 × 10−2 and the maximum deviation value of root mean square of 219.1 × 10−4 were computed for neat solvents. According to the solubility information in pure solvents, the Wilson equation was used to compute the mixing solution parameters. At 298.15 K, the inverse Kirkwood-Buff integral was utilized here to examine the preferred solvation of triamterene. In blends of DMSO/methanol + water with middle and rich DMSO/methanol compositions, the parameters of preferred solvation for DMSO/methanol were positive, indicating the preferential solvation of triamterene by DMSO/methanol. In addition, the electrostatic acidity-basicity properties were demonstrated using the lowest negative electrostatic potential in company with the minimum m local ionization energy of molecular surface. The N in ring of the triamterene is the preferential target for electrophilic assault; and –NH2 of the triamterene, for nucleophilic assault. The weak triamterene-solvent interactions were graphically displayed by the use of the independent gradient approach on the basis of Hirshfeld partition analysis.

A QSAR prediction model for adsorption of organic contaminants on microplastics: Dubinin-Astakhov plus linear solvation energy relationships

Numerous pharmaceuticals and personal care products (PPCPs) co-exist with various types of microplastics (MPs) in the environment, making it extremely hard to experimentally measure all their adsorption interactions. Thus, a precise prediction model is on demand. In this study, we combined the commonly used Dubinin-Astakhov (DA) model and the linear solvation energy relationships (LSERs) model to predict the adsorption capacity (Q0) and adsorption affinity (E) of MPs for PPCPs, including the key parameters of MP (specific surface area, oxygen-containing functional groups), and the Kamlet-Taft solvation parameters of organic contaminants. The model was validated with the experimental data of 8 PPCPs and 8 MPs (i.e. pristine and aged PE, PET, PS, PVC) plus some published adsorption data. This new model also indicated that the adsorption of PPCPs on those MPs was primarily governed by hydrophobic interaction and hydrogen bonding. The developed model can predict the adsorption of PPCPs onto MPs with a high accuracy and can also provide insights into the understanding of interaction forces in the adsorption process.

Theoretical models of solubility for organic solvents. A conceptual density functional theory approach

We present a simple semi-empirical model for solubility in organic solvents, based on the conceptual density functional theory (CDFT) and inspired on the well-known empirical linear solvation energy relationships (LSER) proposed by Kamlet and Taft, where a multiparametric correlation between solubility and empirical descriptors including the hydrogen bond acidity (HBA) and basicity (HBB) plus an additional term describing the dipole polarizability of the solvents was presented. Herein, we set up an analogue model that describes HBA, HBB and dipole polarizability with electronic descriptors derived from the conceptual density functional theory. The main relevant results are as follows: (i) as expected, HBA and HBB properties are not absolute but regional properties, thereby suggesting that any solvent can display both properties with different weights (bifunctional solvents); (ii) while HBA can nicely be represented by a regional electrophilicity index, the HBB property can be accounted for by a regional nucleophilicity. The dipole polarizability is consistently represented by the global softness of the solvent molecule; (iii) the regionalization of these properties is achieved by defining electrophilic and nucleophilic basins within a given solvent molecule by using the electrophilic and nucleophilic Fukui Functions integrated within these basins. The resulting model is validated against the experimental solubility of vanillin and hesperidin in different organic solvents. Further perspectives of the present study should be of special interest in theoretical studies concerning ionic liquids and deep eutectic solvents.

Solvent Replacement Strategies for Processing Pharmaceuticals and Bio-Related Compounds—A Review

An overview of solvent replacement strategies shows that there is great progress in green chemistry for replacing hazardous di-polar aprotic solvents, such as N,N-dimethylformamide (DMF), 1-methyl-2-pyrrolidinone (NMP), and 1,4-dioxane (DI), used in processing active industrial ingredients (APIs). In synthetic chemistry, alcohols, carbonates, ethers, eucalyptol, glycols, furans, ketones, cycloalkanones, lactones, pyrrolidinone or solvent mixtures, 2-methyl tetrahydrofuran in methanol, HCl in cyclopentyl methyl ether, or trifluoroacetic acid in propylene carbonate or surfactant water (no organic solvents) are suggested replacement solvents. For the replacement of dichloromethane (DCM) used in chromatography, ethyl acetate ethanol or 2-propanol in heptanes, with or without acetic acid or ammonium hydroxide additives, are suggested, along with methanol acetic acid in ethyl acetate or methyl tert-butyl ether, ethyl acetate in ethanol in cyclohexane, CO2-ethyl acetate, CO2-methanol, CO2-acetone, and CO2-isopropanol. Supercritical CO2 (scCO2) can be used to replace many organic solvents used in processing materials from natural sources. Vegetable, drupe, legume, and seed oils used as co-extractants (mixed with substrate before extraction) can be used to replace the typical organic co-solvents (ethanol, acetone) used in scCO2 extraction. Mixed solvents consisting of a hydrogen bond donor (HBD) solvent and a hydrogen bond acceptor (HBA) are not addressed in GSK or CHEM21 solvent replacement guides. Published data for 100 water-soluble and water-insoluble APIs in mono-solvents show polarity ranges appropriate for the processing of APIs with mixed solvents. When water is used, possible HBA candidate solvents are acetone, acetic acid, acetonitrile, ethanol, methanol, 2-methyl tetrahydrofuran, 2,2,5,5-tetramethyloxolane, dimethylisosorbide, Cyrene, Cygnet 0.0, or diformylxylose. When alcohol is used, possible HBA candidates are cyclopentanone, esters, lactone, eucalytol, MeSesamol, or diformylxylose. HBA—HBA mixed solvents, such as Cyrene—Cygnet 0.0, could provide interesting new combinations. Solubility parameters, Reichardt polarity, Kamlet—Taft parameters, and linear solvation energy relationships provide practical ways for identifying mixed solvents applicable to API systems.

Combination of linear solvation energy and linear free-energy relationships to aid the prediction of reaction kinetics: Application to the solvolysis of 5-HMF by alcohol to levulinate

In the context of cellulose valorization, we studied the kinetics of levulinates synthesis via the solvolysis of 5-HMF by alcohol over Amberlite IR-120. The alcohol plays a double role; it is a reactant and acts as the solvent. In the literature, kinetic models were developed for each type of alcohol, but there were no models combining the dual effect of alcohol alkyl group substituent (ROH) as a reactant and solvent. Such global kinetic models can save time and optimize a process by considering the solvent effect. This effect was taken into account via the Kamlet–Abboud–Taft and Taft equations, using Bayesian inference. We studied the kinetics of levulinate production from 5-HMF in a reaction mixture made of alcohol and GVL within a temperature range from 80 to 115 °C. The following alcohols were used: methanol, ethanol, propanol, butanol, pentanol, and hexanol. It was found that the rate of alkyl levulinate production increases faster in alcohol reaction medium compared to water reaction medium, and increases when increasing the alkyl group substitution (rMLMethanol>rELEthanol>rPLPropanol>rBLButanol>rPeLPentanol>rHeLHexanol>rLAWater). Among the global kinetic models developed in this study, the one that neglects the side reaction of humins was found to be the most reliable.

Equilibrium solubility, solvent effect, and equation correlations of cyclosporine in twenty mono solvents and four binary mixtures

In this study, the solid–liquid equilibrium solubility of cyclosporine in 20 pure solvents and four binary mixtures at 298.15 K were determined using shake-flask technique. Solid-state characterization exhibited that no solvate formation or polymorphic transformation occurred during the dissolution of cyclosporine in any of the solvent systems investigated. The experimental solubilities of cyclosporine in 20 pure mono solvents were ranked as follows: DEGME (2.21 × 10−1) > ethanol (1.22 × 10−1) > NMP (1.15 × 10−1) = 1-butanol (1.15 × 10−1) > dichloromethane (1.07 × 10−1) > acetonitrile (1.02 × 10−1) > PEG 200 (9.78 × 10−2) > PEG 300 (9.12 × 10−2) > chloroform (8.98 × 10−2) > PEG 400 (8.11 × 10−2) > DMF (7.65 × 10−2) > 2-propanol (7.09 × 10−2) > 1-propanol (6.57 × 10−2) > methanol (6.14 × 10−2) > propylene glycol (6.08 × 10−2) > tetrahydrofuran (4.69 × 10−2) > DMSO (2.64 × 10−2) > acetone (1.28 × 10−2) > glycerol (1.35 × 10−5) > water (4.29 × 10−7). In the four binary solvents (DEGME + water, PEG 200 + water, PEG 300 + water, and PEG 400 + water), the mole fraction solubility of cyclosporine increased with increasing mass fractions of the four different organic solvents. Based on the Kamlet-Taft linear solvation energy relationship (KAT-LSER) model, the solubility of cyclosporine was mainly affected by the self-cohesiveness of the solvent, which is related to the interaction between the solvent and the solvent. Additionally, the solubility parameter was used to explain and understand the solubility of cyclosporine in four different binary solvents. To correlate the solubility data of cyclosporine, two models (the Yalkowsky Log-Linear and simplified CNIBS/R–K models) were applied. The calculated data based on two mathematical models and experimental mole fraction solubility data for cyclosporine could provide information for the separation, extraction, purification, crystallization, and selection of suitable a solvent system.

Separation of carbohydrates using dynamically adsorbed borate stationary phase for hydrophilic interaction liquid chromatography

In this work, a chromatographic method for the separation of carbohydrates was proposed. Tris-(hydroxymethyl)-amine (TRIS) functionalized silica-based hydrophilic interaction liquid chromatography (HILIC) stationary was synthesized. The dynamically absorbed borate layer is generated by using borate buffer as a polar modifier due to the complexation of borate with TRIS ligand in the stationary phase. The chromatographic systems were analyzed by the linear solvation energy relationship model. The calculated system constants revealed the enhancement of anionic exchange by the addition of borate in the mobile phase system. In addition, ligand exchange is critical for the retention and elution order of sugars and sugar alcohols. Carbohydrates displayed prolonged retention with different selectivity profiles relating to their complexation coefficients with borate. Experiment results showed that the effect of borate in this chromatographic system was stable within the range of pH 3–7 and borate concentration of 5–15 mM. This work provides a complementary solution for the separation of carbohydrates. It can also be extended to the separation of glycosides.

Solvatochromism, optical and electronic properties of thiosemicarbazone derivatives in solution phase

The electronic structure, solvatochromic and some optoelectronic properties of five different thiosemicarbazone (TSCs) derivatives with different substituents consisted from indole ring, benzyl ring and conjugated thiosemicarbazide have been investigated in detail. UV–vis. absorption spectra of TSC compounds have been analyzed in solvent media with different polarity. The spectral changes are observed to forming of solvent effects and substituents. Spectral behaviors and electronic transitions are interpreted based on the UV-Vis. spectra. Solvatochromic behaviors were defined by linear solvation energy relationships via multiple linear regression analysis by using Kamlet-Abboud-Taft and Catalán parameters. In addition, the correlations of electronic absorption transition energy with Marcus optical dielectric parameter and Reichardt-Dimroth parameter were also determined. Some optoelectronic parameters such as forbidden band gap energy and refractive index have been determined in different solvent medium. Thiosemicarbazone derivatives have a global electronic absorption transition energy of about 3.351 eV. According to LSER calculations, polarizability-induction of electronic transitions of the investigated molecules is effective. The (E)-4-(4-nitrobenzyl)-1-(2-oxo-2H-indol-3(3aH)-ylidene)thiosemicarbazide (TSC-B) compound that does not a methoxy group and contain nitro group substituent and has the highest forbidden energy range.

Simulation of gas chromatographic separations and estimation of distribution-centric retention parameters using linear solvation energy relationships

For method development in gas chromatography, suitable computer simulations can be very helpful during the optimization process. For such computer simulations retention parameters are needed, that describe the interaction of the analytes with the stationary phase during the separation process. There are different approaches to describe such an interaction, e.g. thermodynamic models like Blumberg's distribution-centric 3-parameter model (K-centric model) or models using chemical properties like the Linear Solvation Energy Relationships (LSER).In this work LSER models for a Rxi-17Sil MS and a Rxi-5Sil MS GC column are developed for different temperatures. The influences of the temperature to the LSER system coefficients are shown in a range between 40 and 200 °C and can be described with Clark and Glew's ABC model as fit function. A thermodynamic interpretation of the system constants is given and its contribution to enthalpy and entropy is calculated. An estimation method for the retention parameters of the K-centric model via LSER models were presented. The predicted retention parameters for a selection of 172 various compounds, such as FAMEs, PCBs and PAHs are compared to isothermal determined values. 40 measurements of temperature programmed GC separations are compared to computer simulations using the differently determined or estimated K-centric retention parameters. The mean difference (RSME) between the measured and predicted retention time is less than 8 s for both stationary phases using the isothermal retention parameters. With the LSER predicted parameters the difference is 20 s for the Rxi-5Sil MS and 38 s for the Rxi-17Sil MS. Therefore, the presented estimation method can be recommended for first method development in gas chromatography.

Synthesis and evaluation of aromatic stationary phases based on linear solvation energy relationship model for expanded application in supercritical fluid chromatography

In the last decade, the separation application based on aromatic stationary phases has been demonstrated in supercritical fluid chromatography (SFC). In this paper, four aromatic stationary phases involving aniline (S-aniline), 1-aminonaphthalene (S-1-ami-naph), 1-aminoanthracene (S-1-ami-anth) and 1-aminopyrene (S-1-ami-py) were synthesized based on full porous particles (FPP) silica, which were not end-capped for providing extra electrostatic interaction. Retention mechanism of these phases in SFC was investigated using a linear solvation energy relationship (LSER) model. The aromatic stationary phases with five positive parameters (a, b, s, e and d+) can provide hydrogen bonding, π-π, dipole-dipole and cation exchange interactions, which belong to the moderate polar phases. The LSER results obtained using routine test solutes demonstrated that the aforementioned interactions of four aromatic stationary phases were influenced by the type and bonding density of the ligand, but to a certain extent. Furthermore, the LSER data verified that the S-1-ami-anth column based on full porous particles silica had higher cation exchange capacity (d+ value), compared to the commercialized 1-AA column (based on the ethylene-bridged hybrid particles). The relationship between the d+ value and SFC additive was quantitatively proved so as to regulate electrostatic interaction reasonably. This value was greatly increased by phosphoric acid, slightly increased by trifluoroacetic acid and formic acid, but significantly reduced by ammonium formate and diethylamine. Taking the S-1-ami-naph column as an example, better peek shape of the flavonoids was obtained after the addition of 0.1 % phosphoric acid in MeOH while isoquinoline alkaloids were eluted successfully within 11 min after adding 0.1 % diethylamine in MeOH. Combined with the unique π-π interaction and controllable electrostatic interaction, the aromatic stationary phases in this study have been proven to have expandable application potential in SFC separation.

Unique structural effect on the fluorosolvatochromism and dual fluorescence emission of D-π-A+ cationic chromophores with furyl bridge. An approach to white light emitters

Photophysical behavior of two D − π − A+ cationic compounds with the same furyl bridge and nicotinamidine group as an electron acceptor moiety and two electron donating groups, namely methoxy (I) and N,N-dimethylamino (II) groups was examined using steady-state and time-resolved techniques in variety of solvents. Time-dependent density functional theory (TDDFT) calculations were performed in some representative solvents and compared with the experimental results. Steady state and time-resolved studies in different solvents reveal that fluorescence emission of (I) is ascribed to an emission from an excited state (ICT) with higher dipole moment than the ground state while the emission of (II) is a dual emission from a state with high charge transfer nature (ICT) in addition to the locally excited state (LE). The fluorescence emission spectra of (II) were found to depend on the excitation wavelength and an increase in the excitation wavelength led to the formation of a longer wavelength emission band with lower quantum yield. It has also been found that the fluorescence excitation spectra were dependent on the emission wavelength. The effect of solvent on the nature of dual emission was examined. Correlation of the photophysical properties of the excited states of (I) and (II) with the solvent polarity, ε, reveals the charge transfer nature of (I) and the long wavelength emission band of (II), while their correlation with the solvent polarity parameter (ETN) shows two different trends when the solvents are divided to aprotic and protic solvents. For precise investigation of the impact of each solvent parameter on each photophysical property, Catalán’s and Laurence’s four parametric linear solvation energy relationships were studied. We have found that the non-specific interactions of the solvent are primarily responsible for controlling the photophysical properties, as demonstrated by Catalán's and Laurence's treatments. DFT and TDDFT calculations were used to anticipate the dipole moments in the ground and excited states and geometry of both states.

Preparation of two zwitterionic polymer functionalized stationary phases and comparative evaluation under mixed-mode of reversed phase/ hydrophilic interaction/ion exchange chromatography

Zwitterions are a promising choice to prepare separation materials because of their hydrophilicity and biocompatibility. We described the preparation of two zwitterionic polymer functionalized stationary phases and evaluation under mixed-mode chromatography. A zwitterionic monomer, S-(4-vinylbenzyl) cysteine (SVC), was synthesized and bonded to silica via reversible addition fragmentation chain transfer (RAFT) polymerization to afford a zwitterionic stationary phase, Sil-SVC. A hydrophobic monomer, N-(4-phenylbutan-2-yl) acrylamide (NPA), was copolymerized with SVC onto the stationary phase (Sil-SVCNPA) for comparison. The stationary phases were characterized with FT-IR, TGA, EA, and zeta-potential measurements. Mobile phase composition (ACN content, pH and salt concentration) was varied to study the retention property. Linear solvation energy relationship and Van't Hoff plot were used to investigate the retention mechanism and how chromatographic conditions influenced it. Both stationary phases showed a mixed-mode of RPLC/HILIC/IEC and satisfactory performance in separating hydrophobic analytes (alkylbenzenes and polycyclic aromatic hydrocarbons), hydrophilic nucleotide and bases, and anions, high column efficiency of 60,000 plates·m−1 was achieved. In summary, zwitterionic polymers are attractive options to prepare stationary phases and the retention property can be easily regulated by copolymer.