Limestone Mine Research Articles

OPEN-PIT LIMESTONE MINING AREAS MAPPING AND ASSESSMENT USING RANDOM FOREST ALGORITHM FOR SUSTAINABLE DEVELOPMENT

Limestone excavation is prone to land use/cover change, which impacts the ecosystem. The objective of this paper is to use a remote sensing dataset and the Quantum Geographic Information System (QGIS) to map and assess active captive limestone mining sites at the Yerraguntla in the YSR Kadapa district, Andhra Pradesh, India, for the year 2019. In this paper, the Limestone mining area was assessed as 379.57 ha with an overall accuracy of 95.79%, user accuracy of 97.25%, producer accuracy of 99.18%, and kappa coefficient of 0.957 by analyzing Sentinel-2A imagery dataset with Random Forest (RF) classifier. The findings were assessed in 2019 using very high-resolution (<1m) Google Earth images (486.47 ha) from Google Earth Pro and industrial field survey reports (487.10 ha). This research helps Limestone mine owners and Environmental engineers implement eco-friendly mining operations and monitor mining progress at low cost with less human efforts for sustainable development.

Potential Identification of Root System Architecture Using GPR for Tree Translocation as a Sustainable Forestry Task: A Case Study of the Wild Service Tree

Sustainable economic development serves society but requires taking over space, often at the expense of areas occupied by single trees or even parts of forest areas. Techniques for transplanting adult trees used in various conflict situations at the interface of economy and nature work as a tool for sustainable management of urbanized and industrial areas, as well as, in certain circumstances, forest or naturally valuable areas. This study aimed to evaluate the effectiveness of ground-penetrating radar (GPR) in determining the horizontal and vertical extent of tree root systems before transplantation. Employing this non-invasive method to map root system architecture aids in the appropriate equipment selection and helps define the dimensions and depth of trenches to minimize root damage during excavation. This study specifically focused on the root systems of wild service trees (Sorbus torminalis (L.) Crantz) found in a limestone mine area, where some specimens were planned to be transplanted, as the species is protected under law in Poland. The root systems were scanned with a ground-penetrating radar equipped with a 750 MHz antenna. Then, the root balls were dug out, and the root parameters and other dendrometric parameters were measured. The GPR survey and manual root analyses provided rich comparative graphic material. The number of the main roots detected by the GPR was comparable to those inventoried after extracting the stump. The research was carried out in problematic soil, causing non-standard deformations of the root systems. Especially in such conditions, identifying unusually arranged roots using the GPR method is valuable because it helps in a detailed planning of the transplanting process, minimizing root breakage during the activities carried out, which increases the survival chances of the transplanted tree in a new location.

Water provision benefits from karst ecosystems: An example for Watuputih groundwater basin, North Kendeng Mountain, Indonesia

Karst ecosystems offer a wealth of ecosystem services, but their protection is increasingly challenging due to degradation and land-use conversion, including limestone mining. This study investigates the water provision service derived from karst ecosystems threatened by limestone mining in the Watuputih groundwater basin, Central Java, Indonesia. Water supply was quantified by measuring water discharge rates from major springs around the basin. Water usage was quantified for household consumption, agriculture, and recreation. This study also measured water infiltration rates in mining and non-mining areas to indicate the effects of limestone mining to hydrological processes. This study identified three primary springs around the basin: Sumber Seribu spring, Brubulan spring, and Kalutan spring, with discharge rates of 1,080 liters per second, 85 liters per second, and 0.76 liters per second, respectively. A local water company extracts water from Sumber Seribu spring at a rate of 80 liters per second to supply approximately 57,600 individuals. The water supply from the three springs can irrigate approximately 1,594 hectares of rice fields. Water from Sumber Seribu spring also supports recreational activities in Sumber Semen recreation park, attracting an average of 19,173 visitors per year. This study revealed a complete impairment of soil's water infiltration capacity in limestone mining areas. These findings underscore the pressing need to safeguard the Watuputih groundwater basin and to mitigate the detrimental effects of limestone mining on hydrological processes. This involves designating the Watuputih karst ecosystem as a protected area, implementing Payment for Ecosystem Services (PES) programs, and restoring degraded post-mining sites.

Soil properties of overburden and topsoil in limestone mining area: A preliminary study

Limestone mining removes topsoil and produces overburden piles, which is improper for plant growth. The objectives of this study were to compare the texture, certain chemical properties, and bacterial population of overburden to the topsoil and to observe the effects of compost amendment on the growth of corn seedlings on the potted overburden. The overburden characterization was performed using a quantitative descriptive method with purposive sampling. Samples were taken from a 6-month-old overburden pile and a pine-vegetable agroforestry ecosystem. The data were further analyzed by using the Student’s t-test. A bioassay was set up in a randomized block design with various concentration compost treatments and five replications. The results showed significant differences between texture, chemical characteristics, and bacterial counts of overburden and topsoil were recorded. The topsoil was more acidic and had higher organic carbon, potential phosphorus, potential potassium, and cation exchange capacity, while the overburden had higher levels of calcium; however, the total N and Magnesium content in topsoil and overburden was similar. The bacterial population of the overburden was lower than in the topsoil. A total of 16 gram-negative and one gram-positive bacteria have been identified from both samples. Applying huge amounts of compost enhanced corn seedlings' growth in the overburden. The study suggested that overburden was more unfertile compared to the topsoil. Therefore, the improvement of overburden properties by compost amendment is needed to green the area.

Estimasi Cadangan Batugamping Menggunakan Block Model Berdasarkan Metode Interpolasi IDW pada IUP OP 231 Karangkemojing

The increasing development of infrastructure development has an impact on the increase in cement demand. Cement is used as the main raw material in making concrete and other construction materials. Therefore, limestone mining as a raw material for cement is also increasing. One of the areas that has prospects for limestone mining is IUP OP 231 Karangkemojing which is still in the exploration stage. The purpose of this study is to determine the geological and geomorphological conditions of the study area, determine the amount of limestone reserves, and determine the estimated mine life based on production targets. The methods used in this research are field observation and laboratory analysis including petrographic analysis and X-Ray Fluorescence (XRF) analysis. Furthermore, the calculation of limestone reserves was carried out using block modeling and the Inverse Distance Weighting (IDW) interpolation method processed using Surpac software. Based on field geological mapping, the research area is included in the wavy hilly and steep hilly structural landforms, which consist of two lithological units, namely sandstone and claystone intermixture units and limestone units. The results of the calculation of limestone reserves in the study area were obtained at 61,444,362 tons with an estimated mine life of about 24 years and 6 months.

Enhancing soybean cultivation sustainability: impact of limestone mining co-products on soil and plant chemical attributes

The increasing demand for sustainable agricultural practices necessitates innovative solutions for soil fertilization. This study aimed to assess the viability of using limestone mining co-products from the Irati and Corumbataí Formations as multi-nutrient sources for Glycine max cultivation. The experiment utilized a double factorial design (7 × 2) with five replications, randomly arranged and placed in pots within a greenhouse. The factors examined were the type of co-product (sedimentary rocks from the Irati Formation: rhythmite and bituminous shale; and the Corumbataí Formation: clayey siltstone) and the soil type (Haplic Arenosol and Rhodic Ferralsol). Soil ion content was assessed at 21 and 140 days after treatment application. Each pot housed four G. max plants, with leaf harvest occurring after 42 days of growth. Macronutrient content, leaf production, and soil ion availability were determined thereafter. Overall, co-product application led to increased soil pH and availability of essential ions, including K+, Mg2+, Ca2+, P, S-SO42−, and Si. At 140 days, rhythmite was notably effective in increasing pH, Ca2+, and Mg2+ in Haplic Arenosol, with respective increases of 22%, 224%, and 696%. Bituminous shale, on the other hand, significantly increased S-SO42− content by 67% and 426% in Rhodic Ferralsol and Haplic Arenosol, respectively. Moreover, the application of co-products resulted in enhanced accumulation of K, Ca, Mg, and S in G. max plants, alongside increased leaf production. In conclusion, the utilization of mining co-products positively influenced soil and plant chemical attributes, particularly enhancing leaf production in G. max. These findings highlight the potential of co-products as environmentally friendly solutions for soil fertilization, supporting sustainable agricultural practices. This research highlights a significant step towards sustainable agriculture by recycling mining waste into valuable soil amendments, which can improve crop yields and reduce the environmental impact of both mining and agricultural activities.Graphical

Preparation of an environment-friendly microbial limestone dust suppressant and its dust suppression mechanism.

The development of an efficient and environmentally friendly dust suppressant is crucial to address the issue of dust pollution in limestone mines. Leveraging the synergistic microbial-induced calcium carbonate precipitation (MICP) technology involving NaHCO3 and dodecyl glucoside (APG), the optimal ratio of the dust suppressant was determined through single-factor and response surface tests. The dust suppression efficacy and mechanisms were analyzed through performance testing and microscopic imaging techniques, indicating that the optimal ratio of the new microbial dust suppressant was 20% mineralized bacteria cultured for 72h, 0.647molL-1 cementing solution, 3.142% NaHCO3, and 0.149% APG. Under these conditions, the yield of calcium carbonate increased by 24.89% as compared to when no NaHCO3 was added. The dust suppressant demonstrated excellent wind, moisture, and rain resistance, as well as curing ability. More calcite was formed in the dust samples after treatment, and the stable form of the dust suppressant contributed to consolidating the limestone dust into a cohesive mass. These findings indicate that the synergistic effect of NaHCO3 and APG significantly enhanced the dust suppression capabilities of the designed microbial dust suppressant.

A quick and effective trait-based protocol for selecting appropriate native plant species for the reforestation of degraded tropical mines.

A critical issue in tropical forests is that anthropogenic deforestation (i.e., mining) degrades the integrity of its ecosystem. Reforestation with appropriate native plant species helps to alleviate these detrimental impacts. A protocol to select appropriate plant species for this purpose currently lacks efficacy and timeliness. We provided a trait-based protocol to quickly and effectively select native plant species for mining reforestation. A 0.2-km2 area of Baopoling (BPL) at Hainan Island, China, was used as a study site, which has been severely degraded by 20 years of limestone mining for cement production. First, we identified the tree species in nearby undisturbed tropical forests, followed by evaluating the similarities in functional traits of the most dominant one (target species) and 60 local candidate native plant species (candidate species) whose saplings can be purchased from a local market. This dataset was used in our trait-based protocol, and only within 1 month, we successfully selected eight plant species which are very similar to target species from the 60 candidate species. We also quantified whether the eight selected plant species were indeed suitable for sustained reforestation by testing their effects on landscape and also their survival rate and recruitment ability after using them to perform reforestation in BPL from 2016 to 2023. Finally, these eight plant species are indeed suitable for reforestation due to their huge influences on a significant shift from originally degraded landscape (comprising only barren rocks) to a forest landscape totally and also their high survival rate (90%-97%) and ability for natural recruitment after 7 years' reforestation in BPL. Thus, we anticipate that this protocol would be integral to species selection during reforestation of tropical mining areas.

Enhancing blasting efficiency: A smart predictive model for cost optimization and risk reduction

Mineral extraction involves distinct stages, including drilling, blasting, loading, transporting, and processing minerals at a designated facility. The initial phase is drilling and blasting, crucial for controlled dimensions of crushed stone suitable for the processing plant. Incorrect blasting can lead to unsuitable stone grading and destructive outcomes like ground vibrations, stone projection, air blasts, and recoil. Predicting and optimizing blasting costs (BC) is essential to achieve desired particle size reduction while mitigating adverse blasting consequences. BC varies with rock hardness, blasting techniques, and patterns. This study presents a BC prediction model using data from 6 Iranian limestone mines, employing firefly (FF) and gray wolf optimization (GWO) algorithms. With 146 data points and parameters like hole diameter (D), ANFO (AN), sub-drilling (J), uniaxial compressive strength (σc), burden (B), hole number (N), umolite (EM),spacing (S), specific gravity (γr), stemming (T), hole length (H), rock hardness (HA), and electric detonators (Det), the data was split into 80% for model construction and 20% for validation. Using statistical indicators, the model showed good performance, offering engineers, researchers, and mining professionals high accuracy. The @RISK software conducted sensitivity analysis, revealing T parameter as the most influential input factor, where minor T changes significantly affected BC. Lastly, the @RISK software was employed to conduct a sensitivity analysis on the model's outputs. The analyses demonstrated that, among the input factors, the T parameter had the most pronounced effect on the model's output. Even small changes in the value of T led to considerable fluctuations in the predicted BC.

Landslide disaster risk analysis in Kebomas District, Gresik District

Background: Landslides occurred during the rainy season in Kebomas District, Gresik Regency, which has topography in the form of hills left over from limestone mining in 1960-1990. Field surveys conducted from December 2021 to March 2022 stated that landslides occurred during the rainy season in Kebomas District and caused damage to surrounding settlements. Slope, rainfall, rock type, soil type, and land use are factors that influence the occurrence of landslides. The purpose of this study was to map the level of landslide vulnerability in Kebomas District using a Geographic Information System. Method: The methodologies used in this study include the application of GIS for geospatial data analysis, assessment of landslide hazard potential through secondary data and field surveys, and vulnerability analysis of physical data. Additionally, a qualitative analysis of landslide disaster risk was conducted, combining hazard and vulnerability factors. These methods aim to identify and prioritize landslide-prone areas in Gresik Regency for better disaster risk management. Findings: The results showed that there were three levels of landslide vulnerability in Kebomas District, namely low, medium and high. The low vulnerability class is found in all villages in the Kebomas District, most of which are in the six villages or sub-districts in the south, west and north, namely; Dahanrejo, Kedanyang, Prambang, Kembangan, Randuagung, and Segoromadu. The moderate vulnerability class is found in all villages in the Kebomas District, most of which are in the six villages in the southeast, northwest and north, namely; Randuagung, Prambang, Dahanrejo, Kembangan, Sidomoro, and Ngargosari. Areas with a high vulnerability class are located in the central part of the sub-district which includes 15 villages or sub-districts, most of which are in four villages, namely; Klangonan, Kawisanyar, Randuagung, and Sidomoro. Conclusion: This study shows that mapping the level of landslide vulnerability in the Kebomas District can help plan and manage disaster risks more effectively, especially in areas with high vulnerability. Novelty/Originality of this article: The results of this study provide a basis for creating more targeted landslide mitigation and handling strategies, as well as the need for special attention in areas with moderate to high vulnerability.

Soil erodibility results of revegetation using bitti plant at various ages reclamation of quarry a lime stone mine at Pt Semen Tonasa, Pangkep District, South Sulawesi

Background: Limestone mine reclamation carried out by PT Semen Tonasa is carried out periodically as an effort to restore land conditions in a sustainable manner. The reclamation was carried out in the form of revegetation using endemic plants, namely the bitti plant (Vitex cofassus R.) which grows a lot in the southern part of Sulawesi. This study aims to determine the erodibility of the soil in limestone mine reclamation land planted with bitti plants. Methods: The method used is the survey method by determining the location of soil samples using the purposive sampling method based on the reclamation age planted with bitti plants in 2019, 2015 and 2010 and determining the erodibility value using the formula according to Wischmerier and Smith (1978). Parameters used included soil texture, soil structure, organic matter, soil permeability, soil pH, and soil unit weight. Findings: The results of this study indicate that the erodibility of the soil in the limestone mine reclamation land planted with bitti plants is classified as high due to the high dust content which is influenced by the parent material. The results of this study indicate that the erodibility value of the land reclamation in 2019 was classified as moderately low to moderately high, the land reclamation in 2015 was classified as moderate to moderately high, and the land reclamation in 2010 was classified as moderate to high. Conclusion: The factor affecting the erodibility of the soil in the reclamation area is the M value (percentage of very fine silt and sand). Novelty/Originality of this Study: The novelty of this study lies in the examination of soil erodibility changes over different reclamation ages in a limestone mine using endemic bitti plants. This research highlights the unique relationship between reclamation age and soil properties, contributing valuable insights into effective land reclamation practices in tropical karst environments.

KEANEKARAGAMAN DAN KELIMPAHAN MESOFAUNA TANAH DI LAHAN BEKAS TAMBANG GAMPING KECAMATAN PADALARANG, BANDUNG BARAT

Soil fauna is one of the ecosystem components that play a role in the process of organic matter decomposition and soil improvement. Soil mesofauna are sensitive to environmental changes due to human activities, including land conversion for mining activities. The diversity and abundance of soil fauna depend on environmental conditions and food availability. Soil mesofauna can be used as bioindicators of habitat degradation and soil quality. This study aims to identify and assess soil mesofauna diversity index and abundance on open access land (LAT) formerly used for limestone mining in the Padalarang area, West Bandung Regency. Soil samples were collected from natural soil (844 masl), LAT 1 (837 masl), LAT 2 (834 masl), and LAT 3 (809 masl). Soil fauna were extracted using a Berlese Funnel Extractor. Soil fauna diversity was calculated based on Shannon’s Diversity Index, while soil fauna abundance was calculated based on Meyer's (1966) equation. The highest soil fauna diversity value was found in natural soil at 1.87 (moderate), while the lowest soil fauna diversity value was found in LAT 2 at 1.38 (low). The highest soil fauna abundance was found in LAT 2 (6295 individuals/m2) with a slope gradient of 8-15%, while the lowest abundance was found in natural soil (594 individuals/m2) with a slope gradient of 15-25%. Variation in abundance, taxon count, and soil fauna diversity is influenced by environmental factors such as soil pH, slope gradient, vegetation, and moisture content.

Evaluation of soil pollution effects on maize (Zea mays) at selected Pb-Zn and limestone mine sites in Ebonyi State, Southeastern Nigeria.

This research examined soil contamination and the uptake of potentially toxic elements (PTEs) by maize plants in mining communities. We collected 192 soil samples and 40 maize plant samples from two mining areas and a pristine site. We analyzed the physical properties and element content of the soil, including phosphorus, nitrogen, potassium, Fe, Zn, Co, Pb, Cd, Cr, and Ni. We also measured the elemental concentrations in the maize plants. The study found higher levels of Zn, Cu, and Pb at the mining sites compared to the control areas. The pollution factor (CF) indicated pollution with Cu > Pb > and > Zn at both mine sites. The pollution index (PLI) showed no pollution in the Nkalagu mine and control sites, but heavy and moderate pollution at the Ameka mine and control sites, respectively. The Ameka mine site was enriched with Zn. The bioaccumulation coefficient (BAC) was < 1 except for Zn at the Nkalagu mine and control site. The transfer factor for Fe and Zn from root to shoot was > 1. Pb was > 1 in all study areas except the Ameka mining areas. The results suggest remediation is needed for the two mine sites, especially at Ameka.

Development of a Method for Utilization of Quarry Drainage Waters of a Limestone Mine to Ensure Environmental Safety

A method has been developed for the disposal of quarry drainage waters, which ensures that they are not discharged into an open reservoir and reduce their anthropogenic impact on the environment. The direction of drainage waters from the limestone quarry into the technological process of preparing the raw charge reduces the consumption of circulating soda solutions and ensures higher extraction of potassium sulfate from soda solutions. The average increase in the yield of potassium sulfate from an increase in the content of sulfates in the liquid phase of the raw nephelinelimestone-soda charge is 4.0 tons per day or 1,460 tons per year.

Assessment of Mine Plans for Production and Variations at Ibese Limestone Mines

This research investigated the mine plans used for the production target and annual production of limestone for the past seven (7) years. The actual amount of limestone produced per year in tons was computed to determine the variations in the mine's production and the life span of the reserve of limestone deposits. A new mine plan was proposed, and a targeted amount of limestone production per year was suggested. The mine plans for the mine's production were generated from 2014 to 2020 using a complete data collection system for Real Time (RTK) GPS and Total Stations with in-field coordinate geometry called SurCE by Carlson Software. The total production target for the seven (7) years was 87,017,146 tons and the actual production was 76,313,056 tons. The total variations for the years under this assessment were -10,704,090 tons except for the year 2018 when the actual production was higher than the production target of 511,179 tons. The volumetric reserve estimation revealed that the total volume of the limestone reserve is 5,052,236,090.186 tons. The expected production per week was computed to be 356,400 tons/week, expected monthly production, (EMP) was estimated to be 1,425,600 tons/month. The expected production year, (EPY) was 17,107,200 tons/year and the life span of the limestone deposit, (LS) was computed to be 295.34 years. It can be suggested that the company should target a production rate of 1,425,200 monthly and 17,104,200 per year. This suggestion can be achieved if there is enough investment in terms of skilled labour, heavy-duty machinery, and equipment which will cost-effectively boost production.

Hydration, phase assemblage and microstructure of cementitious blends with low-grade limestone

Limestone of the purity mandated by the standards for use in cement manufacture (as raw material or as performance improver) is only a fraction of the mined material. Sometimes, limestone contains impurities like silica, clay, dolomite etc. beyond the levels specified for use as an additive or for cement production. This limestone, commonly known as low-grade limestone, also may have a potential to be used as a supplementary cementitious material. This paper reports a study conducted to understand the hydration behaviour of ordinary Portland cement in combination with low-grade limestone. Low-grade limestone samples with dolomite, silica and clay impurities were collected from various limestone mines in India and used in cementitious blends at various replacement levels after suitable processing. Reaction kinetics was studied using calorimetry and phase assemblage using techniques like X-ray diffraction and thermogravimetry. Mercury intrusion porosimetry was employed to study the microstructure of cementitious blends. Dilution effect of low-grade limestone was studied by measuring compressive strength of cement mortar cubes for various replacement levels. Shortening of induction period, increased peak heat rate and reduced time to peak were observed in the blends of ordinary Portland cement with low-grade limestone. Carboaluminate formation, ettringite stabilisation and higher bound water content were also seen. The studies showed that low-grade limestone also can be used as a partial replacement for ordinary Portland cement without compromising the strength up to 15% replacement. Higher replacement levels, although showing a reduction in strength due to dilution effect, could still be considered for non-structural applications.

Dampak Kerusakan Sumber Daya Alam Akibat Kegiatan Penambangan Komoditas Batu Gamping di Kecamatan Panceng, Kabupaten Gresik, Provinsi Jawa Timur

The aim of limestone mining activities is to obtain the main raw material, namely limestone, which can then be used as a construction raw material such as cement. This data collection method is to collect primary data obtained from identifying activity locations and secondary data obtained from Journal Reviews and other scientific articles and then compiling them into a narrative. From the results of this analysis, it can be seen that there is a positive impact, namely the recruitment of workers from the local area and a negative impact, namely a decrease in ambient air quality, a decrease in water quality, soil erosion, disruption of flora and fauna and plant vegetation.

Land Characteristics in Limestone Mining Areas In Ratatotok District, Southeast Minahasa Regency

This research was conducted with the objectives: (1) to obtain information about vegetation types; (2) to obtain a general overview of land morphology; (3) to identify the physical and chemical properties of the soil. This research was located in the limestone mining area of North Ratatotok Village, Ratatotok District, Southeast Minahasa Regency, North Sulawesi in May – October 2023. This research is descriptive research with a variable approach through field surveys and is supported by soil analysis in the laboratory. Primary data was obtained through field surveys including observing vegetation types, and land morphology, and taking soil samples followed by analysis of the physical and chemical properties of the soil in the laboratory. The data obtained was analyzed descriptively with a qualitative approach. The results of the research show that: (1) There are approximately 31 types of vegetation identified on the limestone land, where the dominant plants are coconut, cloves, and teak, followed by food plants such as tubers, fruit, and vegetables; (2) Land morphology is characterized by a slope consisting of 0 - 3 % (flat), 15 - 30 % (sloping), 25 - 30 % (sloping) and &gt; 45 % (very steep), (3a) the physical characteristics of the land are characterized The soil color varies, namely dark grayish brown to very dark grayish brown, the soil structure is subangular blocky with a weak to a strong level of development, the soil consistency is loose to very loose, followed by slightly firm to firm, the soil texture is dominated by factions. dust, followed by the clay fraction and sand fraction, soil permeability is included in the criteria of rather slow, moderate to rather fast; (3b) Soil chemical characteristics are characterized by pH (slightly acidic - neutral), available P (shallow), C-organic (shallow - medium), N-total (low - very high), C/N ratio (low - medium), Kdd (low – medium, Nadd (low – medium), Mgdd (low – high), Cadd (high – very high), KTK (high – very high, and KB (medium – very high). Keywords: land characteristics, mining, limestone Abstrak Penelitian ini dilakukan dengan tujuan : (1) untuk memperoleh informasi tentang jenis vegetasi; (2) untuk memperoleh gambaran umum tentang morfologi lahan; (3) dan untuk mengidentifikasi sifat fisik dan kimia tanah. Lokasi penelitian ini dilaksanakan di areal pertambangan batu kapur desa Ratatotok Utara Kecamatan Ratatotok Kabupaten Minahasa Tenggara, Sulawesi Utara pada bulan Mei – Oktober 2023. Penelitian ini merupakan penelitian deskriptif dengan pendekatan variabel melalui survei lapangan dan didukung oleh analisis tanah di laboratorium. Data primer diperoleh melalui survei lapangan meliputi pengamatan jenis vegetasi, morfologi lahan, dan pengambilan contoh tanah yang dilanjutkan dengan analisis sifat fisik dan kimia tanah di laboratorium. Data yang diperoleh dianalisis secara deskriptif dengan pendekatan kualitatif. Hasil penelitian menunjukkan bahwa : (1) Jenis vegetasi yang teridentifikasi pada lahan batuan kapur sebanyak kurang lebih 31 individu dimana tanaman yang dominan adalah kelapa , cengkeh, jati diikuti oleh tanaman pangan seperti umbi-umbian, buah-buahan dan sayur-sayuran; (2) Morfologi lahan dicirikan oleh kemiringan lereng terdiri dari 0 - 3 % (datar), 15 - 30 % (miring), 25 - 30 % (miring) dan &gt; 45 % (sangat curam), (3a) karakteristik fisik tanah dicirikan oleh warna tanah bervariasi, yaitu coklat keabuan gelap sampai coklat keabuan sangat gelap, struktur tanah adalah gumpal membulat (subangular blocky) dengan tingkat perkembangan lemah sampai kuat, konsistensi tanah gembur sampai sangat gembur, diikuti oleh agak teguh sampai teguh, tekstur tanahnya didominasi oleh faksi debu, diikuti oleh fraksi liat dan fraksi pasir, permeabilitas tanah termasuk pada kriteria agak lambat, sedang sampai dengan agak cepat; (3b) karakteristik kimia tanah dicirikan oleh pH (agak masam - netral), P tersedia (sangat rendah), C-organik (sangat rendah – sedang), N-total (rendah - sangat tinggi), ratio C/N (rendah – sedang), Kdd (rendah – sedang, Nadd (rendah – sedang), Mgdd (rendah – tinggi), Cadd (tinggi – sangat tinngi), KTK (tinggi – sangat tinggi, dan KB (sedang – sangat tinggi). Kata kunci : karakteristik lahan, pertambangan, batu kapur

Generating sustainable cement material from seawater with low-cost ultrafiltration (UF) membrane electrolysis

Membrane electrolysis offers a promising avenue for in-situ generation of hydroxide ions (OH−), facilitating the recovery of magnesium (Mg2+) and calcium (Ca2+) ions from seawater as alkaline earth hydroxide precipitates. This process paves the way for an alternative greener method in the production of raw materials for cement manufacturing compared to limestone mining. Despite its potential, the application of conventional ion migration membranes, such as anion exchange membrane (AEM) and cation exchange membrane (CEM), is hampered by their high cost and low mechanical quality, posing significant barriers to industrial scalability. In this work, we introduce the utilization of commercially available high mechanical strength ultrafiltration (UF) membrane within a two-chamber electrochemical system, repurposing it as an ion migration membrane due to its distinct advantages in terms of simplicity and relative cost-efficiency than conventional AEM. This research demonstrates that the UF membrane exhibited a comparable performance to AEM in terms of OH− production. Both membranes achieved 97–99 % removal of Mg2+ and Ca2+ within 3 h at a current density of 8 mA/cm2 and maintained comparable migration rate of SO42− ion. Compared to AEM, a notable distinction of the UF membrane is its reduced migration rate of Cl− ions, resulting in lower membrane discoloration/oxidation. Furthermore, the investigation reveals that utilizing a Na2SO4 solution as an alternative anolyte, despite being slower for OH− production, offers economic advantages and facilitates higher selective recovery of Mg2+ over Ca2+. The end products of this process, MgO and CaO, are viable raw materials for cement production, underscoring a sustainable and low carbon approach compared to conventional limestone mining of cement production.

Production of Synthetic Carbonate Rocks Using Limestone Mining Waste: Mineralogical, Petrophysical and Geomechanical Characterization

Production of Synthetic Carbonate Rocks Using Limestone Mining Waste: Mineralogical, Petrophysical and Geomechanical Characterization